Global economic situation and energy resources’ prices influence local economic trends, investment of capital, status of financial institutions and cement industry in Azerbaijan in whole. These trends influence demand and activities of cement business communities which start to optimize expenses and find new priority decisions in business. Moreover some independent economic analysts refer to forecasts that since 2016 yearly demand will increase 4-5% in Azerbaijan. Objectives are to forecast cement price in the market using Fuzzy c-means (together with Fuzzy Inference System) and ANFIS which are entered MATLAB mathematical packet and to compare the results of these methods.Taking into consideration the results of research and applied forecast models the cement price can show the stable slow increasing in the market even there is probability of some periodic fluctuations and regulating actions by the state authorities. Therefore it is high probability that the cement price will increase next 1-2 years
Global Markets and Advanced Technologies for Paints and CoatingsReportsnReports
This report provides an overview and analysis of the global market for paints and coatings from 2011-2018. It examines key market trends, identifies new opportunities, and profiles major industry players. The global market for paints and coatings is expected to grow from $117 billion in 2011 to over $180 billion in 2018. Waterborne coating technologies are the largest and fastest growing segment, projected to increase from $45 billion to over $80 billion during this period. The report provides an in-depth look at coating technologies, applications, regional markets, and the competitive landscape of the coatings industry.
Global Markets and Advanced Technologies for Paints and CoatingsReportsnReports
This report provides an overview and analysis of the global market for paints and coatings. It examines key market trends from 2011-2018, identifying growth rates and new opportunities. The 317-page report discusses research and development activities, new product applications, and the major players in the industry. It provides a comprehensive look at the paint and coatings market, technologies, and application segments.
Russia tire market size, share , market trends & forecast 2025TechSci Research
According to www.techsciresearch.com latest Report- Russia Tire Market 2025, Russia is an oil driven economy, and consequently, was significantly impacted due to decline in oil prices over the past few years. Automotive sector in the country also witnessed a dip, which further negatively impacted tire market in Russia. Government of Russia has been taking various initiatives for attracting foreign direct investment (FDI) in various sectors such as agriculture, infrastructure and transportation & tourism.
Report URL- https://www.techsciresearch.com/report/russia-tire-market/4348.html
U.S. Unlaminated Plastics Profile Shape Market. Analysis And Forecast to 2020IndexBox Marketing
IndexBox Marketing has just published its report: “U.S. Unlaminated Plastics Profile Shape Market. Analysis And Forecast to 2020”.
The report provides an in-depth analysis of the U.S. unlaminated plastics profile shape market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
Powder Metallurgy: Technologies and Global MarketsReportLinker.com
BCC projects that value of powder shipments will resume growth in 2010 at a 3.9% compound annual growth rate (CAGR), from $4.6 billion in 2009 to $4.7 billion in 2010. From 2010 to 2015, this segment will increase at a 6.8% compound annual growth rate (CAGR) to a value of $6.6 billion.The part base will grow from a low of nearly $9.7 billion in 2009 to more than $10 billion in 2010. From 2010 to 2015 this segment will increase at a 6.8% compound annual growth rate (CAGR) to reach a value of $13.9 billion in 2015.Individual powders and parts will also pick up in 2010.
China coal industry development trend and investment strategic decision repor...Qianzhan Intelligence
The document provides an overview and analysis of trends in China's coal industry from 2013 to 2020. It discusses factors influencing the supply and demand of coal, forecasts supply and demand based on mathematical models, and analyzes imports and exports and profit prospects. It also forecasts regional and corporate market shares and identifies development bottlenecks and solutions for coal companies. A key trend is the non-coal industries that large coal companies are developing, such as coal-electricity-aluminum projects, to diversify away from traditional mining activities. The document aims to help companies understand opportunities and risks in China's coal sector over the coming years.
U.S. Copper And Copper Alloy Products Market. Analysis And Forecast to 2020IndexBox Marketing
IndexBox Marketing has just published its report: “U.S. Copper And Copper Alloy Products Market. Analysis And Forecast to 2020”.
The report provides an in-depth analysis of the U.S. copper and copper alloy product market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
The global market for steel powder is expected to grow from $ 4,610.0 million in 2021 to $ 5,448.8 million in 2026. The market is expected to grow at a CAGR of 3.4% over the forecast period (2021-2026). Some of the market's key participants are AMETEK, CNPC Powder Material, Carpenter Technology, Daido Steel, GKN (Hoeganaes), Haining Feida, Höganäs, JFE Steel Corporation, Jiande Yitong, KOBELCO, Laiwu Iron&Steel Group, Ma Steel, Metal Powder Products, NANOSTEEL, Pellets, Pometon Powder, Rio Tinto, Sandvik, Wuhan Iron&Steel Group. This report intends to identify significant growth areas and to explore relevant market strategies. This in-depth analysis delves into the global market for steel powder. The primary goal of this research is to examine the potential growth areas, significant trends, and the market's impact on the industry. The report also reviews the adoption of steel powder in both established and emerging markets.
Global Markets and Advanced Technologies for Paints and CoatingsReportsnReports
This report provides an overview and analysis of the global market for paints and coatings from 2011-2018. It examines key market trends, identifies new opportunities, and profiles major industry players. The global market for paints and coatings is expected to grow from $117 billion in 2011 to over $180 billion in 2018. Waterborne coating technologies are the largest and fastest growing segment, projected to increase from $45 billion to over $80 billion during this period. The report provides an in-depth look at coating technologies, applications, regional markets, and the competitive landscape of the coatings industry.
Global Markets and Advanced Technologies for Paints and CoatingsReportsnReports
This report provides an overview and analysis of the global market for paints and coatings. It examines key market trends from 2011-2018, identifying growth rates and new opportunities. The 317-page report discusses research and development activities, new product applications, and the major players in the industry. It provides a comprehensive look at the paint and coatings market, technologies, and application segments.
Russia tire market size, share , market trends & forecast 2025TechSci Research
According to www.techsciresearch.com latest Report- Russia Tire Market 2025, Russia is an oil driven economy, and consequently, was significantly impacted due to decline in oil prices over the past few years. Automotive sector in the country also witnessed a dip, which further negatively impacted tire market in Russia. Government of Russia has been taking various initiatives for attracting foreign direct investment (FDI) in various sectors such as agriculture, infrastructure and transportation & tourism.
Report URL- https://www.techsciresearch.com/report/russia-tire-market/4348.html
U.S. Unlaminated Plastics Profile Shape Market. Analysis And Forecast to 2020IndexBox Marketing
IndexBox Marketing has just published its report: “U.S. Unlaminated Plastics Profile Shape Market. Analysis And Forecast to 2020”.
The report provides an in-depth analysis of the U.S. unlaminated plastics profile shape market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
Powder Metallurgy: Technologies and Global MarketsReportLinker.com
BCC projects that value of powder shipments will resume growth in 2010 at a 3.9% compound annual growth rate (CAGR), from $4.6 billion in 2009 to $4.7 billion in 2010. From 2010 to 2015, this segment will increase at a 6.8% compound annual growth rate (CAGR) to a value of $6.6 billion.The part base will grow from a low of nearly $9.7 billion in 2009 to more than $10 billion in 2010. From 2010 to 2015 this segment will increase at a 6.8% compound annual growth rate (CAGR) to reach a value of $13.9 billion in 2015.Individual powders and parts will also pick up in 2010.
China coal industry development trend and investment strategic decision repor...Qianzhan Intelligence
The document provides an overview and analysis of trends in China's coal industry from 2013 to 2020. It discusses factors influencing the supply and demand of coal, forecasts supply and demand based on mathematical models, and analyzes imports and exports and profit prospects. It also forecasts regional and corporate market shares and identifies development bottlenecks and solutions for coal companies. A key trend is the non-coal industries that large coal companies are developing, such as coal-electricity-aluminum projects, to diversify away from traditional mining activities. The document aims to help companies understand opportunities and risks in China's coal sector over the coming years.
U.S. Copper And Copper Alloy Products Market. Analysis And Forecast to 2020IndexBox Marketing
IndexBox Marketing has just published its report: “U.S. Copper And Copper Alloy Products Market. Analysis And Forecast to 2020”.
The report provides an in-depth analysis of the U.S. copper and copper alloy product market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
The global market for steel powder is expected to grow from $ 4,610.0 million in 2021 to $ 5,448.8 million in 2026. The market is expected to grow at a CAGR of 3.4% over the forecast period (2021-2026). Some of the market's key participants are AMETEK, CNPC Powder Material, Carpenter Technology, Daido Steel, GKN (Hoeganaes), Haining Feida, Höganäs, JFE Steel Corporation, Jiande Yitong, KOBELCO, Laiwu Iron&Steel Group, Ma Steel, Metal Powder Products, NANOSTEEL, Pellets, Pometon Powder, Rio Tinto, Sandvik, Wuhan Iron&Steel Group. This report intends to identify significant growth areas and to explore relevant market strategies. This in-depth analysis delves into the global market for steel powder. The primary goal of this research is to examine the potential growth areas, significant trends, and the market's impact on the industry. The report also reviews the adoption of steel powder in both established and emerging markets.
Methyl Methacrylate Adhesives Market Analysis, 2024TechSci Research
Asia-Pacific has the largest market share in global methyl methacrylate adhesives. High demand from wind energy, marine industry and automotive & transportation is fuelling demand for methyl methacrylate adhesives in the region.
The global market for calcined alumina is expected to grow from $ 2,186.9 million in 2021 to $ 2,764.7 million in 2026. The market is expected to grow at a CAGR of 4.8% over the forecast period (2021-2026). Some of the market's key participants are Almatis, Alteo, CHALCO, Hindalco, Huber Corporation, ICA, Jingang, Kaiou, Motim, Nabaltec, Nalco, Nippon Light Metal, Shandong Aopeng, Showa Denko, Silkem, Sumitomo Chemical. This report intends to identify significant growth areas and to explore relevant market strategies. This in-depth analysis delves into the global market for calcined alumina. The primary goal of this research is to examine the potential growth areas, significant trends, and the market's impact on the industry. The report also reviews the adoption of calcined alumina in both established and emerging markets.
EU: Angles, Shapes and Sections (of Iron or Non-Alloy Steel) – Market Report....IndexBox Marketing
IndexBox Marketing has just published its report: “EU: Angles, Shapes and Sections (of Iron or Non-Alloy Steel) - Market Report. Analysis And Forecast To 2020”. This report focuses on the EU iron angle market, providing a comprehensive analysis and the most recent data on its market size and volume, EU trade, price dynamics, domestic production, and turnover in the industry. The market trends section reveals the main issues and uncertainties concerning the industry, while the medium-term outlook uncovers market prospects. The attractivity index (IB Index) summarizes the source of existing opportunities as they appear in this market, as well as an interpretation of the trade figures.
A comprehensive research report created through extensive primary research (inputs from industry experts, companies, stakeholders) and secondary research, the report aims to present the analysis of Global Specialty Polymers Market. Request free Sample of this Report @: http://azothanalytics.com/report/chemicals/global-specialty-polymer-market-analysis-by-type-thermoplastics-biodegradable-conducting-electroluminescent-liquid-crystal-polymer-by-application-by-region-by-country-2019-edition-opportunities-and-forecast-2014-2024-r33202
The global market for sputter coating is expected to grow from $ 6,957.3 million in 2021 to $ 8,879.5 million in 2026. The market is expected to grow at a CAGR of 5.0% over the forecast period (2021-2026). Some of the market's key participants are China Rare Metal Material, GRIKIN, Heraeus, Honeywell, JX Nippon Mining & Metal, Jiangyin Entret Coating Technology, Materion, Praxair, Soleras Advanced Coatings, Tosoh SMD, ULVAC, Umicore. This report intends to identify significant growth areas and to explore relevant market strategies. This in-depth analysis delves into the global market for sputter coating. The primary goal of this research is to examine the potential growth areas, significant trends, and the market's impact on the industry. The report also reviews the adoption of sputter coating in both established and emerging markets.
2009 report on china road marking paint industry168report
The document is a 60-page market research report on the China road marking paint industry from 168Report. It provides an overview of the industry, including key trends like rapid growth in demand driven by highway and urban construction. It analyzes the market for both hot melt and solvent-based paints and outlines opportunities and challenges. The report also profiles major companies and includes tables and figures projecting industry and regional demand through 2011.
China coal industry development trend and investment strategic decision repor...Qianzhan Intelligence
The document provides an overview and analysis of trends in China's coal industry from 2013 to 2020. It discusses factors influencing the supply and demand of coal, forecasts supply and demand levels using mathematical models, and analyzes how imports and exports may change. The summary also looks at regional market shares and development bottlenecks coal companies may face. Overall, the document conducts a comprehensive analysis of trends in China's coal industry to help companies understand opportunities and challenges in the coming years.
China construction coating industry market demand forecast and investment str...Qianzhan Intelligence
This document provides an overview and analysis of the construction coating industry in China from 2013-2017. It discusses trends in the industry's development, market environment, competition, regional markets, and operations of major companies. Specifically:
- The industry has grown gradually in recent years due to downstream support. China's construction and decoration industries are also booming, increasing demand for construction coatings.
- Key factors influencing the industry include policies, economic growth and investment, technology development, and market competition both within China and internationally.
- Major companies discussed include AkzoNobel, Nippon Paint, and others. Their operations, strategies, and development advantages and disadvantages are analyzed.
- Regional markets for construction
U.S. Iron Foundries Market. Analysis And Forecast to 2025IndexBox Marketing
IndexBox Marketing has just published its report: "U.S. Iron Foundries Market. Analysis And Forecast to 2025". The report provides an in-depth analysis of the U.S. iron foundry market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
U.S. Iron And Steel Pipe And Tube Market. Analysis And Forecast to 2020IndexBox Marketing
IndexBox Marketing has just published its report: “U.S. Iron And Steel Pipe And Tube Market. Analysis And Forecast to 2020”.
The report provides an in-depth analysis of the U.S. iron and steel pipe and tube market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
Thorough Heavy Truck Market Analysis Covering Companies, Demand Data and MorePete Jones
The 2016 Heavy Truck market report offers comprehensive information on companies, demand data, classification, applications, historical coverage, future insights and more.
EU: Carboys, Bottles And Similar Articles Of Plastics - Market Report. Analys...IndexBox Marketing
IndexBox Marketing has just published its report: “EU: Carboys, Bottles And Similar Articles Of Plastics - Market Report. Analysis And Forecast To 2020”. This report focuses on the EU plastic article market, providing a comprehensive analysis and the most recent data on its market size and volume, EU trade, price dynamics, domestic production, and turnover in the industry. The market trends section reveals the main issues and uncertainties concerning the industry, while the medium-term outlook uncovers market prospects. The attractivity index (IB Index) summarizes the source of existing opportunities as they appear in this market, as well as an interpretation of the trade figures.
Russia: Storage Racks Market. Analysis and Forecast to 2017ReportLinker.com
1. The report provides an analysis of the Russian storage racks market from 2005-2017, including production, exports, imports and consumption.
2. Pallet racks make up 67% of the market, driven by the large warehouse sector, while shelving racks account for 19% due to retail growth.
3. After declining from 2008-2011 due to economic factors, the market is forecast to grow rapidly again from 2012 as storage space demand increases.
Analysis of Triwheeler for Handicapped PersonIJERA Editor
1. The document describes a solar-powered triwheeler designed to assist handicapped persons. It discusses the key components of the triwheeler, including solar panels, batteries, a brushless DC motor, motor controller, and throttle.
2. The triwheeler aims to provide independent transportation for handicapped individuals on college campuses in a cost-effective and environmentally-friendly manner. It is powered by a solar array that charges batteries to power an electric motor.
3. The document reviews the components in detail, including how the motor controller regulates power from the batteries to the motor based on input from the throttle and hall sensors. It also discusses advantages of solar power such as generating no pollution and providing a
High- Throughput CAM Based On Search and Shift MechanismIJERA Editor
This paper introduces a search and shift mechanism for high throughput content-addressable memory(CAM). A CAM is a memory unit that process single clock cycle content matching instead of addresses using well dedicated comparison circuitry. Most mismatches can be found by searching a few bits of a search word. The most critical design challenge in CAM is to reduce power consumption associated with reduced area and increased speed. To lower power dissipation, a word circuit is often divided into two sections that are sequentially searched or even pipelined. Because of this process, most of match lines in the second section are unused. Since searching the last few bits is very fast compared to searching the rest of the bits, throughput can be increased by asynchronously initiating second-stage searches on the unused match lines as soon as a firststage search is complete. A reordered overlapped search mechanism for high throughput low energy content addressable memories (CAMs) is the existing method. By this method the latency and throughput does not shows a better improvement. Here a method of search and shift mechanism for cam is proposed to improve the latency and throughput. This method also reduces power consumption. Here a cache memory is using to store the compared result. This will reduce the number of registers used for output bits. A 32x16 bit CAM is implemented and evaluated using Xilinx simulation. Thus the proposed method improves the latency by k+1 cycles and throughput by K cycles and reduces the power consumption also.
Effect of Nano-Tio2addition on Mechanical Properties of Concrete and Corrosio...IJERA Editor
Concrete science is a multidisciplinary area of research where nanotechnology potentially offers the opportunity to enhance the understanding of concrete behavior, to engineer its properties and to lower production and ecological cost of construction materials. The main objective of this research was to evaluate the effect of nanoTiO2on compressive strength,bond strength and corrosion behavior of reinforcement bars. It has been found that the compressive strength, bond strength and corrosion resistance was increased with increasing nano-TiO2to 1.5wt. % as replacement of cement. Beyond this value, these properties decrease.
Management of Drilling Cuttings in Term of Volume and Economics in Oil FieldIJERA Editor
The process of drilling oil and gas wells generates large volumes of drill cuttings and spent muds. The American Petroleum Institute estimated that about 150 million barrels of drilling waste was generated yearly from onshore wells in the United States alone. Of the total drilling waste, approximately 50% is solid drilling waste. The biggest contributors of drilling wastes are drilling cuttings and mud. Reducing the drilling fluids not only it reduces the waste volume, but it also reduces the environmental effects associated with it. The main purpose of drilling waste management is to find to ways by which the generation of waste can be controlled to minimize or eliminate its negative impact on the environment. Minimizing waste is always the priority, however, it not always the most cost-effective solution. The objective of this report is to provide study in, the economics of management of drilling cuttings is explored in a case from West Kuwait.
Dielectric properties of Ni-Al nano ferrites synthesized by citrate gel methodIJERA Editor
Ni–Al ferrite with composition of NiAlxFe2-xO4 (x=0.2, 0.4 0.6, and 0.8, ) were prepared by citrate gel method. The Dielectric Properties for all the samples were investigated at room temperature as a function of frequency. The Dielectric constant shows dispersion in the lower frequency region and remains almost constant at higher frequencies. The frequency dependence of dielectric loss tangent (tanδ) is found to be abnormal, giving a peak at certain frequency for mixed Ni-Al ferrites. A qualitative explanation is given for the composition and frequency dependence of the dielectric loss tangent.
Influence of Ruthenium doping on Structural and Morphological Properties of M...IJERA Editor
The present work examines the effect of Ru doping on MoO3 thin films on steel substrate deposited by Sol-gel spin coat method. The annealing temperature was 6000C for pure MoO3 and 8000C for Ru doped thin films. The doping concentration of Ru was varied from 10 to 50wt%. The influence of Ru doping on structural and morphological properties of MoO3 thin films were studied. The XRD revealed that all films are highly crystalline in nature with monoclinic phase for molybdenum peaks. In the doped XRD pattern some new peaks were observed and are matched with ruthenium orthorhombic phase indicating an incorporation of dopant in pure molybdenum oxide. The same is confirmed with the compositional analysis by EDAX. The SEM images of the MoO3 resemble a rod like surface with porous morphology. Incorporation of Ru ions in molybdenum oxide decreases the length of the rods and vanishes after 40wt%. Tetragonal grain size increases from 20wt% of Ru and becomes maximum at 50wt% of Ru doped thin films
Thermoelectric Power Studies Cu-Cd Nano FerritesIJERA Editor
Thermoelectric Power Studies of Cadmium Substituted Copper nano Ferrites of various compositions were investigated from room temperature to well beyond the curie temperature by differential method. The Seebeck coefficient is negative for all compositions showing that these ferrites behave as n-type semi conductors. Plots of Seebeck coefficient verses temperature shows maximum at Curie temperature. On the basis of these results an explanation for the conduction mechanism in Cu-Cd mixed ferrites is suggested
Design of Industrial Electro-Hydraulic Valves, New ApproachIJERA Editor
A fully flexible valve actuation systems are being under consideration as an enabling technology for advanced internal combustion engine concepts. Electro-hydraulic valve actuator systems are being considered as a dominating variable valve technology. Compared to the servo control system, the system using a proportional valve has the advantages of low price, high anti-pollution ability and high reliability. Unlike existing electromechanical or servo actuated electro-hydraulic valve actuation systems, precise valve motion control is achieved with an internal feedback mechanism. This feedback mechanism can be turned on or off in real-time using simple two state valves which helps reduce the system cost and enables mass production.
Methyl Methacrylate Adhesives Market Analysis, 2024TechSci Research
Asia-Pacific has the largest market share in global methyl methacrylate adhesives. High demand from wind energy, marine industry and automotive & transportation is fuelling demand for methyl methacrylate adhesives in the region.
The global market for calcined alumina is expected to grow from $ 2,186.9 million in 2021 to $ 2,764.7 million in 2026. The market is expected to grow at a CAGR of 4.8% over the forecast period (2021-2026). Some of the market's key participants are Almatis, Alteo, CHALCO, Hindalco, Huber Corporation, ICA, Jingang, Kaiou, Motim, Nabaltec, Nalco, Nippon Light Metal, Shandong Aopeng, Showa Denko, Silkem, Sumitomo Chemical. This report intends to identify significant growth areas and to explore relevant market strategies. This in-depth analysis delves into the global market for calcined alumina. The primary goal of this research is to examine the potential growth areas, significant trends, and the market's impact on the industry. The report also reviews the adoption of calcined alumina in both established and emerging markets.
EU: Angles, Shapes and Sections (of Iron or Non-Alloy Steel) – Market Report....IndexBox Marketing
IndexBox Marketing has just published its report: “EU: Angles, Shapes and Sections (of Iron or Non-Alloy Steel) - Market Report. Analysis And Forecast To 2020”. This report focuses on the EU iron angle market, providing a comprehensive analysis and the most recent data on its market size and volume, EU trade, price dynamics, domestic production, and turnover in the industry. The market trends section reveals the main issues and uncertainties concerning the industry, while the medium-term outlook uncovers market prospects. The attractivity index (IB Index) summarizes the source of existing opportunities as they appear in this market, as well as an interpretation of the trade figures.
A comprehensive research report created through extensive primary research (inputs from industry experts, companies, stakeholders) and secondary research, the report aims to present the analysis of Global Specialty Polymers Market. Request free Sample of this Report @: http://azothanalytics.com/report/chemicals/global-specialty-polymer-market-analysis-by-type-thermoplastics-biodegradable-conducting-electroluminescent-liquid-crystal-polymer-by-application-by-region-by-country-2019-edition-opportunities-and-forecast-2014-2024-r33202
The global market for sputter coating is expected to grow from $ 6,957.3 million in 2021 to $ 8,879.5 million in 2026. The market is expected to grow at a CAGR of 5.0% over the forecast period (2021-2026). Some of the market's key participants are China Rare Metal Material, GRIKIN, Heraeus, Honeywell, JX Nippon Mining & Metal, Jiangyin Entret Coating Technology, Materion, Praxair, Soleras Advanced Coatings, Tosoh SMD, ULVAC, Umicore. This report intends to identify significant growth areas and to explore relevant market strategies. This in-depth analysis delves into the global market for sputter coating. The primary goal of this research is to examine the potential growth areas, significant trends, and the market's impact on the industry. The report also reviews the adoption of sputter coating in both established and emerging markets.
2009 report on china road marking paint industry168report
The document is a 60-page market research report on the China road marking paint industry from 168Report. It provides an overview of the industry, including key trends like rapid growth in demand driven by highway and urban construction. It analyzes the market for both hot melt and solvent-based paints and outlines opportunities and challenges. The report also profiles major companies and includes tables and figures projecting industry and regional demand through 2011.
China coal industry development trend and investment strategic decision repor...Qianzhan Intelligence
The document provides an overview and analysis of trends in China's coal industry from 2013 to 2020. It discusses factors influencing the supply and demand of coal, forecasts supply and demand levels using mathematical models, and analyzes how imports and exports may change. The summary also looks at regional market shares and development bottlenecks coal companies may face. Overall, the document conducts a comprehensive analysis of trends in China's coal industry to help companies understand opportunities and challenges in the coming years.
China construction coating industry market demand forecast and investment str...Qianzhan Intelligence
This document provides an overview and analysis of the construction coating industry in China from 2013-2017. It discusses trends in the industry's development, market environment, competition, regional markets, and operations of major companies. Specifically:
- The industry has grown gradually in recent years due to downstream support. China's construction and decoration industries are also booming, increasing demand for construction coatings.
- Key factors influencing the industry include policies, economic growth and investment, technology development, and market competition both within China and internationally.
- Major companies discussed include AkzoNobel, Nippon Paint, and others. Their operations, strategies, and development advantages and disadvantages are analyzed.
- Regional markets for construction
U.S. Iron Foundries Market. Analysis And Forecast to 2025IndexBox Marketing
IndexBox Marketing has just published its report: "U.S. Iron Foundries Market. Analysis And Forecast to 2025". The report provides an in-depth analysis of the U.S. iron foundry market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
U.S. Iron And Steel Pipe And Tube Market. Analysis And Forecast to 2020IndexBox Marketing
IndexBox Marketing has just published its report: “U.S. Iron And Steel Pipe And Tube Market. Analysis And Forecast to 2020”.
The report provides an in-depth analysis of the U.S. iron and steel pipe and tube market. It presents the latest data of the market size and volume, domestic production, exports and imports, price dynamics and turnover in the industry. In addition, the report contains insightful information about the industry, including industry life cycle, business locations, productivity, employment and many other crucial aspects. The Company Profiles section contains relevant data on the major players in the industry.
Thorough Heavy Truck Market Analysis Covering Companies, Demand Data and MorePete Jones
The 2016 Heavy Truck market report offers comprehensive information on companies, demand data, classification, applications, historical coverage, future insights and more.
EU: Carboys, Bottles And Similar Articles Of Plastics - Market Report. Analys...IndexBox Marketing
IndexBox Marketing has just published its report: “EU: Carboys, Bottles And Similar Articles Of Plastics - Market Report. Analysis And Forecast To 2020”. This report focuses on the EU plastic article market, providing a comprehensive analysis and the most recent data on its market size and volume, EU trade, price dynamics, domestic production, and turnover in the industry. The market trends section reveals the main issues and uncertainties concerning the industry, while the medium-term outlook uncovers market prospects. The attractivity index (IB Index) summarizes the source of existing opportunities as they appear in this market, as well as an interpretation of the trade figures.
Russia: Storage Racks Market. Analysis and Forecast to 2017ReportLinker.com
1. The report provides an analysis of the Russian storage racks market from 2005-2017, including production, exports, imports and consumption.
2. Pallet racks make up 67% of the market, driven by the large warehouse sector, while shelving racks account for 19% due to retail growth.
3. After declining from 2008-2011 due to economic factors, the market is forecast to grow rapidly again from 2012 as storage space demand increases.
Analysis of Triwheeler for Handicapped PersonIJERA Editor
1. The document describes a solar-powered triwheeler designed to assist handicapped persons. It discusses the key components of the triwheeler, including solar panels, batteries, a brushless DC motor, motor controller, and throttle.
2. The triwheeler aims to provide independent transportation for handicapped individuals on college campuses in a cost-effective and environmentally-friendly manner. It is powered by a solar array that charges batteries to power an electric motor.
3. The document reviews the components in detail, including how the motor controller regulates power from the batteries to the motor based on input from the throttle and hall sensors. It also discusses advantages of solar power such as generating no pollution and providing a
High- Throughput CAM Based On Search and Shift MechanismIJERA Editor
This paper introduces a search and shift mechanism for high throughput content-addressable memory(CAM). A CAM is a memory unit that process single clock cycle content matching instead of addresses using well dedicated comparison circuitry. Most mismatches can be found by searching a few bits of a search word. The most critical design challenge in CAM is to reduce power consumption associated with reduced area and increased speed. To lower power dissipation, a word circuit is often divided into two sections that are sequentially searched or even pipelined. Because of this process, most of match lines in the second section are unused. Since searching the last few bits is very fast compared to searching the rest of the bits, throughput can be increased by asynchronously initiating second-stage searches on the unused match lines as soon as a firststage search is complete. A reordered overlapped search mechanism for high throughput low energy content addressable memories (CAMs) is the existing method. By this method the latency and throughput does not shows a better improvement. Here a method of search and shift mechanism for cam is proposed to improve the latency and throughput. This method also reduces power consumption. Here a cache memory is using to store the compared result. This will reduce the number of registers used for output bits. A 32x16 bit CAM is implemented and evaluated using Xilinx simulation. Thus the proposed method improves the latency by k+1 cycles and throughput by K cycles and reduces the power consumption also.
Effect of Nano-Tio2addition on Mechanical Properties of Concrete and Corrosio...IJERA Editor
Concrete science is a multidisciplinary area of research where nanotechnology potentially offers the opportunity to enhance the understanding of concrete behavior, to engineer its properties and to lower production and ecological cost of construction materials. The main objective of this research was to evaluate the effect of nanoTiO2on compressive strength,bond strength and corrosion behavior of reinforcement bars. It has been found that the compressive strength, bond strength and corrosion resistance was increased with increasing nano-TiO2to 1.5wt. % as replacement of cement. Beyond this value, these properties decrease.
Management of Drilling Cuttings in Term of Volume and Economics in Oil FieldIJERA Editor
The process of drilling oil and gas wells generates large volumes of drill cuttings and spent muds. The American Petroleum Institute estimated that about 150 million barrels of drilling waste was generated yearly from onshore wells in the United States alone. Of the total drilling waste, approximately 50% is solid drilling waste. The biggest contributors of drilling wastes are drilling cuttings and mud. Reducing the drilling fluids not only it reduces the waste volume, but it also reduces the environmental effects associated with it. The main purpose of drilling waste management is to find to ways by which the generation of waste can be controlled to minimize or eliminate its negative impact on the environment. Minimizing waste is always the priority, however, it not always the most cost-effective solution. The objective of this report is to provide study in, the economics of management of drilling cuttings is explored in a case from West Kuwait.
Dielectric properties of Ni-Al nano ferrites synthesized by citrate gel methodIJERA Editor
Ni–Al ferrite with composition of NiAlxFe2-xO4 (x=0.2, 0.4 0.6, and 0.8, ) were prepared by citrate gel method. The Dielectric Properties for all the samples were investigated at room temperature as a function of frequency. The Dielectric constant shows dispersion in the lower frequency region and remains almost constant at higher frequencies. The frequency dependence of dielectric loss tangent (tanδ) is found to be abnormal, giving a peak at certain frequency for mixed Ni-Al ferrites. A qualitative explanation is given for the composition and frequency dependence of the dielectric loss tangent.
Influence of Ruthenium doping on Structural and Morphological Properties of M...IJERA Editor
The present work examines the effect of Ru doping on MoO3 thin films on steel substrate deposited by Sol-gel spin coat method. The annealing temperature was 6000C for pure MoO3 and 8000C for Ru doped thin films. The doping concentration of Ru was varied from 10 to 50wt%. The influence of Ru doping on structural and morphological properties of MoO3 thin films were studied. The XRD revealed that all films are highly crystalline in nature with monoclinic phase for molybdenum peaks. In the doped XRD pattern some new peaks were observed and are matched with ruthenium orthorhombic phase indicating an incorporation of dopant in pure molybdenum oxide. The same is confirmed with the compositional analysis by EDAX. The SEM images of the MoO3 resemble a rod like surface with porous morphology. Incorporation of Ru ions in molybdenum oxide decreases the length of the rods and vanishes after 40wt%. Tetragonal grain size increases from 20wt% of Ru and becomes maximum at 50wt% of Ru doped thin films
Thermoelectric Power Studies Cu-Cd Nano FerritesIJERA Editor
Thermoelectric Power Studies of Cadmium Substituted Copper nano Ferrites of various compositions were investigated from room temperature to well beyond the curie temperature by differential method. The Seebeck coefficient is negative for all compositions showing that these ferrites behave as n-type semi conductors. Plots of Seebeck coefficient verses temperature shows maximum at Curie temperature. On the basis of these results an explanation for the conduction mechanism in Cu-Cd mixed ferrites is suggested
Design of Industrial Electro-Hydraulic Valves, New ApproachIJERA Editor
A fully flexible valve actuation systems are being under consideration as an enabling technology for advanced internal combustion engine concepts. Electro-hydraulic valve actuator systems are being considered as a dominating variable valve technology. Compared to the servo control system, the system using a proportional valve has the advantages of low price, high anti-pollution ability and high reliability. Unlike existing electromechanical or servo actuated electro-hydraulic valve actuation systems, precise valve motion control is achieved with an internal feedback mechanism. This feedback mechanism can be turned on or off in real-time using simple two state valves which helps reduce the system cost and enables mass production.
In the field of touchy processing, many people would access the touchy phones, keypads etc. where the disadvantage of touchy system is all about touch screen. So, to overcome this problem, we are going to develop a project based on touch less device which is used to access and process our data with minimum time complexity for optimization of the sourcing data. Our project contain marker to highlight required key term. Touch less detects both the size and location of “Marker’s Gestures” for writing purposes. Whereas the camera played a key role to select our object that is an image for it’s processing. In this, we are giving command on camera to identify the gestures by Touch less SDK and reducing manual efforts.
Behaviour of Single Pile in Reinforced Slope Subjected to Inclined LoadIJERA Editor
Deep foundations, including driven piles, are used to support vertical loads of structures and lateral forces. Typical structures subjected to lateral loads include bridge abutments, transmission tower, sand offshore platforms. Traffic, wind, wave, and seismic forces are common types of lateral loads subjected to pile foundations. The present work is focused on understanding the lateral load capacity of vertical piles located near crest of the slope and subjected to the lateral and inclined loads. The experimental investigation was carried out to study the effect of reinforcing an earth slope on the inclined loading behavior of a single vertical pile located near the slope. Layers of geogrid were used to reinforce a sandy slope of 1V:2H. The parametric studies were performed by varying the length of pile(L), angle of inclination of load (θ), number of geogrid reinforcement (Nr) and crest distance. It was observed that the lateral load capacity of pile depends upon these parameters. The lateral load capacity of pile increases with increase in inclination of load, length of pile(L), number of geogrid reinforcement (Nr) and crest distance
A Review of Strategies to Promote Road Safety in Rich Developing Countries: t...IJERA Editor
Road safety policies, strategies and action plans, along with trends in road traffic injuries (RTIs) in the oil-rich Gulf Cooperative Council (GCC) countries were examined to appraise their road safety work with an overall objective of identifying key measures and initiatives that would reduce RTA and their resulting consequences in these countries. Data on RTIs was obtained from police and from vital statistics and was analyzed. Research papers, policy documents, and strategies, obtained from relevant stakeholders in the six GCC countries, were reviewed and discussed. Traffic Safety Programs and action plans, which were the most fundamental documents in the development of the GCC countries’ road safety policies and strategies, were reviewed. Policy documents on road safety and traffic related issues were searched on the websites of related authorities. Published research on road safety in GCC countries was searched using available databases. Analysis of accident data shows that the fatality rates in all the GCC countries are much higher than developed countries with good safety records. The six administrations started the fundamental traffic safety programs to combat the increase in RTIs, with some succeeding in reducing RTI rates by implementing vast road safety improvements. However, RTIs increased again mainly because of increasing traffic volume and high-risk driving behavior. Developing and implementing national road safety strategies in some GCC countries was successful in reducing the RTI rates. The road safety situation in the six GCC countries was assessed showing high crash and fatality rates compared to developed countries. Most GCC countries still suffer from sustainable increase in traffic crashes despite the efforts to reduce their magnitude and severity. Some of these countries have developed and implemented national road safety strategies, while countries like Oman still need to develop such a long-term strategy. Following the review of the current progress in road safety initiatives developed or implemented, it is apparent that there is still considerable room for improvement. In view of the fact that the oil-rich GCC countries have similar economic, social, and political background, a number of specific areas of action common to all countries were identified to achieve a safer road environment in the studied countries.
Effect of Weaknesses of the Internal Control Systems And NonCompliance With S...IJERA Editor
The purpose of this study was to see whether there is an influence of Weaknesses of the Internal Control System and Non-compliance With Statutory Provisions on the audit opinion of the audit board. The weakness of the internal control system measured by the audit findings Audit Board consisting of weaknesses of the accounting control system and reporting, and weaknesses of the budget implementation control system and weaknesses of the internal control structure. While non-compliance with statutory provisions are measured based on the audit findings Audit Board consisting of local loss, the potential loss of local , lack of receipt, administration, waste, inefficiency and ineffectiveness. This study is a survey of the region of the provincial government of DKI Jakarta and Banten for 2010 to 2014. Samples in this study were all the Local Government Unit that generate financial reports of local governments totaling nine units, so this study is census research, in the sense that the entire population sampled. Data analysis method used is the ordinal logistic regression because the dependent variable is the rank (category) and the data is not normal. From the results of the data analysis and discussion, it can be concluded that the weaknesses of the internal control system and non-compliance with statutory provisions affect the audit opinion of the audit board either jointly or partially.
Performance Study of Wind Friction Reduction Attachments for Van Using Comput...IJERA Editor
Road transport is the key factor as it is the major method to connect places through land. Along with wide use of internal combustion engines for this purpose comes the massive consumption of fossil fuels by vehicles. Most of the research today is toward making efficient machines. This paper mainly deals with providing attachments to existing models of vehicle to make it more efficient. An assessment of the impact of aerodynamic drag and its relationship to energy consumption presented. A few models are designed and analysed for reducing drag with the help of Attachments. Solid works is used to model and ANSYS Fluent is used for CFD analysis. The results of Cd of various configuration is analysed, 0.427 being the Cd for conventional Van is reduced to 0.234 for van with front and rear attachment
Effects of Zno on electrical properties of Polyaniline CompositesIJERA Editor
In the present investigation, Polyaniline / Zinc oxide with various weight percentage of Zinc oxide (10%, 20%, 30, 40% and 50%) were synthesized by in-situ polymerization method. The prepared composites were characterized by X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier Infrared Spectroscopy (FTIR). The dc conductivity of the samples was measured as a function of temperature in the range 30-180oC and it was found that increasing the concentration of ZnO particles increases the conductivity. Ac conductivity of the composites was studied with respect to frequency.
Frequent Item set Mining of Big Data for Social MediaIJERA Editor
Big data is a term for massive data sets having large, more varied and complex structure with the difficulties of storing, analyzing and visualizing for further processes or results. Bigdata includes data from email, documents, pictures, audio, video files, and other sources that do not fit into a relational database. This unstructured data brings enormous challenges to Bigdata.The process of research into massive amounts of data to reveal hidden patterns and secret correlations named as big data analytics. Therefore, big data implementations need to be analyzed and executed as accurately as possible. The proposed model structures the unstructured data from social media in a structured form so that data can be queried efficiently by using Hadoop MapReduce framework. The Bigdata mining is essential in order to extract value from massive amount of data. MapReduce is efficient method to deal with Big data than traditional techniques.The proposed Linguistic string matching Knuth-Morris-Pratt algorithm and K-Means clustering algorithm gives proper platform to extract value from massive amount of data and recommendation for user.Linguistic matching techniques such as Knuth–Morris–Pratt string matching algorithm are very useful in giving proper matching output to user query. The K-Means algorithm is one which works on clustering data using vector space model. It can be an appropriate method to produce recommendation for user.
Performance Improvement Of Bengali Text Compression Using Transliteration And...IJERA Editor
In this paper, we propose a new compression technique based on transliteration of Bengali text to English. Compared to Bengali, English is a less symbolic language. Thus transliteration of Bengali text to English reduces the number of characters to be coded. Huffman coding is well known for producing optimal compression. When Huffman principal is applied on transliterated text significant performance improvement is achieved in terms of decoding speed and space requirement compared to Unicode compression.
Este documento resume las características básicas de las células animales y vegetales, incluyendo sus organelos y estructuras. También describe los diferentes tipos de células como procariotas, eucariotas, unicelulares y pluricelulares. Finalmente, menciona que las células fueron descubiertas por el científico inglés Robert Hooke en 1665 usando un microscopio.
Este documento presenta una breve introducción a las células, incluyendo sus principales características y organelos como el aparato de Golgi, retículo endoplasmático, lisosomas, mitocondrias y cloroplastos. También distingue entre células animales y vegetales.
Comparison of Total Actual Cost for Different Types of Lighting Bulbs Used In...IJERA Editor
This paper presents a comparison of actual cost for three different lighting bulbs typically used in houses. They are Incandescent light, Compact Florescent Light CFL and Light Emitted Diode Light LED. The comparison takes in respect how much each lighting bulb consumes actual power and how much it costs in respect of Kuwait’s regulation. Thus, the cost efficiency of each type is calculated. The study deals with typical houses in Kuwait taking in respect the regulation of the distribution and installation rules (R6), [1] of the ministry of water and electricity in Kuwait for the year 2014
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness and boost overall mental well-being.
Tyre Manufacturing Plant Cost Analysis 2021-2026 | Syndicated AnalyticsChinkiTyagi
The document provides a summary of a report on the tyre manufacturing industry and starting a tyre manufacturing plant. It discusses key aspects of the report such as the global tyre market trends, machinery requirements, costs, incomes, and profitability of establishing a tyre plant. The report also examines the manufacturing process, regulatory procedures, and success and risk factors for entering the tyre business.
The rising demand for cement based paints from the construction industry is driving the cement based paints market. They protect the surface from severe climatic conditions, such as heat, humidity, rain, salt atmosphere near seashores, etc.
Read more: https://www.syndicatedanalytics.com/cement-based-paint-manufacturing-plant-project-report
Europe EV Powertrain Testing Services Market 2026TechSci Research
Europe EV powertrain testing services market was valued at USD5,605.88 million in 2020, and it is anticipated to grow at CAGR of 22.02% during the forecast period, 2022-2030. https://bit.ly/3tn7gcZ
Global automotive gasoline_engine_turbocharger_markets-futuristic_reportsjerrythomas78
This 135-page report analyzes the global automotive gasoline engine turbocharger market. It provides historical market revenue figures from 2016 to 2019, forecasts market growth from 2020 to 2026, and identifies key players in the industry. The report covers topics like market drivers and limitations, industry news and regulations, value chain analysis, production and consumption by region, types of turbochargers, and applications in passenger and commercial vehicles. It includes 13 chapters that thoroughly examine the automotive gasoline engine turbocharger industry.
Nail Polish Manufacturing Plant Project Report PPT 2021ChinkiTyagi
Increasing awareness about beauty trends, along with rising brand consciousness, represents one of the significant factors impelling the growth of the nail polish market. Besides this, the easy availability of nail polishes with unique finishing, such as glitter, magnetic, sequins and metallic, and a wide array of colors are positively boosting the overall sales. Other factors, such as the introduction of low-cost nail polishes, are strengthening the growth of the market. Additionally, the escalating demand for organic and natural nail polishes acts as another growth-inducing factor.
Read more: https://www.syndicatedanalytics.com/nail-polish-manufacturing-plant-project-report
Demand across Construction and Packaging Industries to Help GCC Molded Plasti...Paresh Choudhary
The document discusses a report on the molded plastics market in GCC countries from 2015 to 2023. It finds that rising demand from the construction and packaging sectors will help drive significant growth in the market. The market is highly fragmented and competitive. It is also impacted by economic conditions in Europe, as European countries are key exporters of GCC molded plastics. While Saudi Arabia and UAE will see the most opportunities, growth in Bahrain will be sluggish due to low penetration and slow economic growth there. Overall, the GCC molded plastics market is projected to expand at a CAGR of 8.3% over the given period.
Global Masterbatch Market Forecast and Opportunities, 2019TechSci Research
Global Masterbatch Market Forecast & Opportunities, 2019 is a report that analyzes the masterbatch market globally. It finds that the market is forecast to grow at a CAGR of 5.3% from 2014-2019 due to increasing plastic consumption in packaging, construction, and automotive industries. Masterbatches are classified into four types - black, white, color, and additive - depending on the properties they impart to polymers. The report also identifies fast growing economies such as China, India, the Middle East, and South America as major drivers of future masterbatch market growth.
The document discusses the Asia Pacific bus market forecast from 2016 to 2026. It covers key factors such as growing environmental concerns about pollution from diesel buses which is driving demand for electric buses. Governments are promoting bus transportation and replacing diesel buses with zero-emission electric buses to reduce pollution and traffic congestion. The Asia Pacific bus market is segmented by length, fuel type, seating capacity, body type, and application. While buses less than 8m currently lead the market, 10m-12m buses saw increased sales in 2020 for intracity and intercity use.
China Commercial Vehicle Tire Market Forecast and Opportunities 2026.pdfTechSci Research
China commercial vehicle tire stood around USD25.59 billion in terms of value in 2020 and is estimated to reach USD54.40 billion in 2026, advancing with a CAGR of 13.21%. Development in transport infrastructure and rise in public transportation driving the growth of the China commercial vehicle tire market in the forecast years. https://bit.ly/3j8PmWD
Middle East and Africa Electric Three-Wheeler Market, 2027.pdfTechSci Research
Middle East and Africa Electric three-wheeler market stood at USD15,748.91 thousand in 2021 and is forecast to grow at a CAGR of 14.38% to reach USD50,808.07 thousand by 2030. Click : https://www.techsciresearch.com/report/middle-east-and-africa-electric-three-wheeler-market/9434.html
Middle East and Africa Electric Three-Wheeler Market, 2027.pdfTechSci Research
Middle East and Africa Electric three-wheeler market stood at USD15,748.91 thousand in 2021 and is forecast to grow at a CAGR of 14.38% to reach USD50,808.07 thousand by 2030. https://bit.ly/3wM0Gyk
Moreover, demand for industrial rubber such as in conveyor belts and hoses is anticipated to positively influence Carbon Black demand in India during forecast period 2022-2030. Carbon Black is a crude oil derivative and hence its price is directly linked to the fluctuations in crude oil prices internationally. Volatility in the prices of crude oil has remained a major challenge for Carbon Black manufacturers in 2020.
India Gas Genset Market Analysis 2027 | TechSci ResearchTechSci Research
Improved techniques with enhanced productivity, growing investments across upstream oil and gas sector, technological advancements and favorable government initiatives to bolster India gas genset market growth through FY2026. https://bit.ly/2Mrc0wJ
Indonesia gear motor market size, share & market forecast 2026TechSci Research
According to #TechSci Research Report- Indonesia gear motors market is expected to grow at a significant rate in the forecast period. Rising concerns about the adverse effects of harmful emissions from the conventional energy sources of energy and the increase in the adoption of non-conventional sources of energy are expected to drive the gear motors market growth in the next five years.
Report URL : https://www.techsciresearch.com/report/indonesia-gear-motors-market/7821.html
For a report overview of this report please contact sara.peerun@visiongainglobal.com
(+44 (0) 20 7336 6100) or refer to our website:
https://www.visiongain.com/
https://www.visiongain.com/Report/1820/Polymer-Nanocomposites-Market-2017-2027
According to www.techsciresearch.com report “Qatar Busbar Market By Type, By End User, Competition Forecast & Opportunities, 2011 – 2021”, the market for busbar in Qatar is anticipated to grow at a CAGR of around 12% during 2016-2021.
Middle East & Africa Lightning Arrester Market Size, Share & Forecast 2024 | ...TechSci Research
According to www.techsciresearch.com latest report- Middle East & Africa Lightning Arrester Market By Material (Polymeric & Porcelain), By Voltage Rating (<35 KV, 35 KV–110 KV & Above 110 KV), By Class (Transmission Line, Substation & Distribution Line), By Country, Competition, Forecast & Opportunities, 2024.
Report URL- https://www.techsciresearch.com/report/middle-east-and-africa-lightning-arrester-market/4024.html
U.S. Asphalt Shingle And Coating Materials Market. Analysis And Forecast to 2020IndexBox Marketing
This document provides a sample report on the U.S. asphalt shingle and coating materials market from 2016 to 2020. It includes key findings on market value, production, imports and exports from 2015. The executive summary highlights trends in the market and opportunities. The report then provides an overview of the market size and structure, trade balance, and forecasts growth to 2020. It analyzes domestic production, imports, exports, and the competitive landscape.
Nitrogen Production Plant Cost Analysis 2021-2026 | Syndicated AnalyticsChinkiTyagi
The increasing demand for nitrogen from numerous end-use sectors for the production of ammonia is driving the nitrogen market. Ammonia is widely employed in the generation of nylon, dyes, fertilizers, explosives, etc. Furthermore, nitrogen is also used in the annealing of stainless steel and other steel mill products, which is contributing to the market growth.
Read more: https://www.syndicatedanalytics.com/nitrogen-production-cost-analysis-report
Similar to Cement Industry Overview and Market Price Forecasting In Azerbaijan (20)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Gas agency management system project report.pdfKamal Acharya
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Rainfall intensity duration frequency curve statistical analysis and modeling...bijceesjournal
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Generative AI Use cases applications solutions and implementation.pdfmahaffeycheryld
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Design and optimization of ion propulsion dronebjmsejournal
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Cement Industry Overview and Market Price Forecasting In Azerbaijan
1. Latafat Gardashova. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 10, ( Part -1) October 2016, pp.32-38
www.ijera.com 32 | P a g e
Cement Industry Overview and Market Price Forecasting In
Azerbaijan
Latafat Gardashova*, Nazim Huseynov**
*
( Doctor of Science on Engineering, Department of Computer Engineering, Azerbaijan State Oil and Industry
University , Baku, Azerbaijan)
** (MBA Programme, Azerbaijan State Oil and Industry University , Baku, Azerbaijan)
ABSTRACT
Global economic situation and energy resources’ prices influence local economic trends, investment of capital,
status of financial institutions and cement industry in Azerbaijan in whole. These trends influence demand and
activities of cement business communities which start to optimize expenses and find new priority decisions in
business. Moreover some independent economic analysts refer to forecasts that since 2016 yearly demand will
increase 4-5% in Azerbaijan. Objectives are to forecast cement price in the market using Fuzzy c-means
(together with Fuzzy Inference System) and ANFIS which are entered MATLAB mathematical packet and to
compare the results of these methods.Taking into consideration the results of research and applied forecast
models the cement price can show the stable slow increasing in the market even there is probability of some
periodic fluctuations and regulating actions by the state authorities. Therefore it is high probability that the
cement price will increase next 1-2 years.
Keywords: Cement Industry, Forecasting, Fuzzy Neural Network, Fuzzy clustering, Fuzzy rule
I. INTRODUCTION
Republic of Azerbaijan is one of the
major emerging market economies with a
population of 9.78 million in 2015(Table I)[7].
The country is considerably dependent upon the
oil and gas industries. Azerbaijan is emerging
market economy. The statistic data are shown
for recent years[16]).
1.1. Cement Industry and Market Leaders
Overview
Republic of Azerbaijan has three integrated
cement plants with 4.7Mt/yr of cement production
capacity. Holcim Azerbaijan was the only integrated
cement plant in the country some years ago. Norm
Sement and Akkord Cement started operations later.
The country's dependence on the oil and gas
industries has made the economy low development
since prices crashed in 2014.
Table 1 GDP growth rates and Cement capacity.
Above –Table I: The 2014 GDP, 2014 GDP
growth rates (and projections for 2015-2016), 2014
GDP/capita, 2015 population, active integrated
cement plants and active cement production capacity
of the Central Asian countries. Sources: The Global
Cement Directory 2016, CIA World Factbook, IMF
World Economic Outlook (October 2015 update).
The devaluation of the Azerbaijan Manat
(AZN) has also raised some production costs across
many sectors. Despite this, in 2014 construction
materials production grew by 22.2% year-on-year to
US$585m. Cement production grew by 40.5% to
2.98Mt and gypsum production increased by 23.3%
to 192,800t, according to the Azerbaijan State
Statistics Committee. In 2014, domestic cement
demand was 4.3Mt. Currently, about 60% of the
market is provided by local producers and 40% of
cement is imported from neighboring countries. The
domestic cement plants were able to meet market
requirements. Azerbaijan plans to double its
production of building materials, including cement,
in 2016 - 2019, according to the government's draft
RESEARCH ARTICLE OPEN ACCESS
2. Latafat Gardashova. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 10, ( Part -1) October 2016, pp.32-38
www.ijera.com 33 | P a g e
concept of socio-economic development.
Additionally it is planned to expand the production
of building materials and bring their quality to
international standards. The government expects
building materials production to grow by 6.1% to
US$608m in 2016, by 13.1% to US$708m in 2017,
by 20.3% to US$871m in 2018 and by 16.2% to
US$1.03bn in 2019. However, according to other
government forecasts, the construction sector is
expected to decline by 4.6% in 2016 to US$17.5bn.
Holcim Azerbaijan a member of LafargeHolcim
group, has a 1.7Mt/yr cement plant in Garadagh,
Baku. Norm Sement has 2Mt/yr of cement
production capacity in Garadagh, Baku. Akkord
Cement plant has a 1Mt/yr. It is a member of
Akkord Corporation and located in Gazakh.
Strategic thinking requires an awareness of
alternative strategic purposes and objectives and the
ability to recognize critically different environments.
Strategy is not directly part of planning, but about
thinking and implementation. It is a part of a
technique, a way of managing of the business
according to a strategic understanding and
perspective. Strategic management is the process in
which the organization will have a competitive
advantage. Strategic management includes
awareness of how successful and strong an
organization and its strategies are, how the
effectiveness of these strategies might be improved,
and of how circumstances are changing. The main
issues are the ability of an organization to add value,
to achieve synergy and at the same time to satisfy
the needs of the organization’s major stakeholders,
particularly customers and owners. The effective
management of resources to develop and produce
these products for the market helps achieving the
right quality for the right price at the right time.
Local media reported that Azerbaijan's
construction industry was benefitting from the
sporting and tourism sectors. The Eurovision Song
Contest 2012 and the 2015 European Games, the
2016 Baku European Grand Prix, the 42nd Chess
Olympiad in 2016, the 2017 Islamic Solidarity
Games and four matches of the 2020 UEFA
European Championships are main examples. Such
types of public and commercial events can continue
to provide good rises in the construction industry,
prompting higher demand for cement and other
building materials.
Real competitive advantage is ability of an
organization to satisfy customer needs more
effectively than its competitors. It is achieved if and
when real value is added for customers. The
important elements in adding value are
understanding and being close to customers, a
commitment to quality, a high level of all-round
service, speedy reaction to competitive opportunities
and threats. Taking into consideration existing
market condition trends and in order to be effective,
cement plants have to be strategically aware.
Effective result requires a clear understanding of the
needs of the market, and the satisfaction of
customers more effectively and more profitably than
by competitors. This can be achieved when real
value is added for customers. Actually this approach
works in the market if there is the dynamic market
condition as well as supply and demand are balanced
or stable at least. Otherwise the cement production
will not increase and market price will not decrease
accordingly.
Competitive Market Analysis and Market
Cement Price Forecast are one of the main issues.
The unpredictability of the market in the long term is
the critical issue. The share of local production in the
market amounted to 41.4%. Thus, in one case, prices
of construction materials fell because the
construction market is more sluggish, and in another
case, grow due to the activity of the market. Since
2016 yearly demand will increase 4-5%.
II. FORECASTING PROCESS
Time-Series clustering is one of the
important concepts of data mining that is used to
gain insight into the mechanism that generate the
time-series and predicting the future values of the
given time-series. Numerous works are devoted to
the prediction of time-series[1-2,4-6].
[14] proposes a fuzzy clustering approach
based on the autocorrelation functions of time series,
in which each time series is not assigned exclusively
to only one cluster, but it is allowed to belong to
different clusters with various membership degrees.
A two-factor fuzzy time series is presented in [16] to
predict the temperature. Authors combined high-
order fuzzy logical relationships and genetic-
simulated annealing techniques in their work. A
method is developed to deal with the temperature
prediction based on two- factor high-order fuzzy
time series. In [12] have adopted a two-level
clustering method, where both the whole time series,
and the subsequence of time series are taken into
account.
Another method to cluster time series is
hierarchical clustering where nested hierarchy of
similar groups is generated based on a pair-wise
distance matrix of time series. Although, hierarchy
clustering does not require the number of clusters as
an initial parameter that is a well-known and
outstanding feature of hierarchical clustering, the
length of time series have to be identical due to the
use of Euclidean distance as a similarity
measurement[11]. Moreover, these algorithms are
not able to deal effectively with long time series due
to poor scalability. In work [13], hierarchical and
partition clustering is used together with a symbolic
representation of a numeric time series. In this
3. Latafat Gardashova. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 10, ( Part -1) October 2016, pp.32-38
www.ijera.com 34 | P a g e
method, they use the multi-resolution property of
wavelets in their algorithm in such a way that the
final centers obtained at the end of each level are
reused as the initial centers for the next level of
resolution. In research [10] also, the same
representation (symbolic representation of a numeric
time series) is used together with a compression-
based distance function.
The problem with these approaches is their
weakness in reorganization of the structural features
of a sequence; for instance, the place of local
maxima or inflection points. Subsequently, it is
difficult to find the similarity among sequences and
produce value-based differences to use in clustering.
Considering the advantage of k-means
which is a faster method than hierarchical
clustering[3] , the number of clusters has to be pre-
assigned by user, which is not practical in obtaining
natural clustering results. Additionally, K-mean is
unable to deal effectively with long time series due
to poor scalability. Advantages of Fuzzy c-means
clustering method[8] is given below:
1) Gives best result for overlapped data set and
comparatively better then k-means algorithm.
2) Unlike k-means where data point must
exclusively belong to one cluster center here
data point is assigned membership to each
cluster center as a result of which data point
may belong to more then one cluster center.
The experimental results of computer simulations
are described in the below.
Computer simulations.
A time series example has been given in equation:
ntxX t
,1},{
In such a time series, t is time index and n
is the total number of observations. Important
events are formed over the time. This event
characterization function f(t) as shown in the
following form:
),...,,()( 11
xxxftf tt
This function changes according to the
prediction aim. For example, if xt represents current
year Market Price of cement and our aim is to
predict the next year price of cement.
Our goal is to forecast cement price in the
market using Fuzzy c-means (together with Fuzzy
Inference System) and ANFIS which are entered
MATLAB mathematical packet and to compare the
results of these methods.
The structure of the fuzzy neural network
with 2 input and one output is presented in Fig. 1.
Fig 1. Structure of the fuzzy neural network
Let us elaborate on the functionality of the
layers in more detail. Layer 1 consists of fuzzifiers
that map inputs to fuzzy terms used in the rules.
Layer 2 comprises nodes representing these rules.
Each rule node performs the Min operation on the
outputs of the incoming links from the previous
layer. Layer 3 consists of output terms membership
functions. Layer 4 computes the fuzzy output signal
for the output variables. Layer 5 realizes the
defuzzification using the Center-of-Gravity (COG)
defuzzification.
Typic rule majority for Sugeno fuzzy model
having two fuzzy If-Then rule is expressed as
following[9]:
If (x1 A1 ) and (x2 B1 ) then f1=p1x1+ q1x2 + r1
If (x1 A2 ) and (x2 B2 ) then f2=p2x1+ q2x2 + r2
The objects of above mentioned layers can
be shown as followings:
Layer-1: Each bind taking part in this layer
is the adaptive bind determined as following:
4. Latafat Gardashova. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 10, ( Part -1) October 2016, pp.32-38
www.ijera.com 35 | P a g e
Layer-2: Each bind in the layer extracting
the sum of all received signals and denoted by Π .
the extraction of the 2 –th layer can be described as
following :
,
Layer-3: Each i bind taking part in the
layer is a constant bind denoted as N. Each bind in
this layer calculates the correlation of reality degree
of i rule to the sum of reality degree of all rules:
Layer-4: Each i bind of this layer, bind
function is adaptive bind as following:
Layer-5: Last layer, in the 5 –th layer, one bind
having Σ denoted and having sum output and
receiving all signals takes part. Output of this bind is
written as following:
=Total output=
The objective is to determine market price
of cement predicting value by using numerical data.
Dataset contains 18 records with the data on 18 year.
We shall use 2/3 part of data majority for
learning the model, and 1/3 part for testing the
model. Solving the problem by two methods
(ANFIS and Fuzzy clustering) we shall check up
which of them is more efficient.
Fragment of input data is given in Table 2,
fragment of rules and their membership functions
in Fig.2.
Table 2 Fragment of input data
f(t-2) f(t-1) f(t)
2,5 2,5 2,5
4,0 4,1 4,5
4,5 4,5 4,5
4,5 3,1 4,5
5,0 5,5 6,0
6,0 6,0 6,8
6,0 6,5 6,0
6,0 6,5 6,0
6,0 6,5 6,0
6,0 6,5 6,9
6,3 5,7 6,0
6,0 5,5 5,0
4,5 5,5 5,3
Graphical representation of the extracted
fuzzy rules fragment is given below.
Result of testing process for 2016 year is
given in Fig.3.
The values of obtained error measure are
given below. The root mean square errors (RMSE)
is calculated by using the following expression:
Fig 2. Fragment graphical representation of the extracted fuzzy rules
5. Latafat Gardashova. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 10, ( Part -1) October 2016, pp.32-38
www.ijera.com 36 | P a g e
Fig. 3.Forecat value of Market Price Cement for 2016 year((forecast data obtained fuzzy clustering)
Obtained RMSE and forecast data is represented in Table 3:
Table 3 Fragment of Real and forecast data obta- ined using fuzzy clustering method
# Year AZN Forecast, AZN
X1 X2 X3 Yn
1 2000 2,5 2,5 2,5 2,56
2 2001 4,0 4,1 4,5 4,29
3 2002 4,5 4,5 4,5 4,82
4 2003 4,5 3,1 4,5 4,42
… …
15 2014 6,3 5,7 6,0 5,73
16 2015 6,0 5,5 5,0 5,35
17 2016 4,5 5,5 5,3 5,62
18 2017 5,5 5,3 5,62 5,81
19 2018 5,3 5,62 5,81 5,94
RMSE=0,198221
Obtained RMSE and forecast data based on fuzzy Neural Network is represented in Table 4 and Fig.4.
The received results give the basis to approve, that for today forecasts made by using of Fuzzy Neural Network
based forecasting are more reliable and exact.
Table 4 Real and forecast data obtained using fuzzy Neural Network
# Year AZN Forecast
14 2013 6,0 6,5 6,9 6,44
15 2014 6,3 5,7 6,0 5,63
16 2015 6,0 5,5 5,0 5,58
17 2016 4,5 5,5 5,3 5,58
18 2017 5,5 5,3 5,62 5,28
19 2018 5,3 5,62 5,81 6,05
RMSE=0,123882
Graphical representation of real and forecst data obtained by using Fuzzy neural network and fuzzy
clustering is given Fig.5 and. Fig.6
All calculation were made in Matlab environment and MS Excel.
6. Latafat Gardashova. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 10, ( Part -1) October 2016, pp.32-38
www.ijera.com 37 | P a g e
Fig. 5.Forecat value of Market Price Cement for 2018 year (data obtained using fuzzy Neural Network)
Fig.6. Graphical representation of real and forecst data obtained by using Fuzzy neural network
Fig.7. Graphical representation of real and forecst data obtained by using Fuzzy clustering
III. CONCLUSION
Financial resources, new big infrastructure
projects and stable demand are essential conditions
of development of this market. Recommendation is
also to provide the synergy between a cement plant,
a research education institution and a financial
institution in order to introduce innovative products
and new demand. Taking into consideration the
above mentioned analysis and state-of-the-art
calculations it is considered that the cement price
will increase in 1-2 years.
REFERENCES
[1]. Aliev R.A., Fazlollahi B., Aliev R.R., Soft
Computing and Its Applications in Business
and Economics. (Springer Verlag, 2004)
[2]. Bonfig K.W., Mehdi Sh.F., Gardashova
L.A., Neural Network Based Forecasting of
time series and its application in the
forecasting of oil prices in the world
Market. Proc. 8th ICAFS and Soft
Computing, Helsinki, Finland,2008, 275-
281
[3]. Bradley P. S. and Fayyad U. M., Refining
initial points for k-means clustering.
Proc.15th International Conference on
Machine Learning, San Francisco,1998, 91-
99.
[4]. Gardashova L.A., Mehdiyev N.Sh.,
Ramazanov J.I., Aliev R.R. Extraction rules
from data by using differential evolution
based fuzzy clustering method. Proc. Sixth
World Conference on Intelligent Systems
for Industrial Automation. Tashkent,
Uzbekistan, 2010, 322-329.
[5]. Gardashova L.A. Decision making in
management systems of oil refinery
enterprise under fuzzy environment.
Doctoral diss., Azerbaijan, Institute of
Control System. Baku, 2014.
[6]. Gardashova L.A. Fuzzy neural network and
DEO based forecasting. Journal Zbırnik
naukoвиh prac’., Ukraine, Donetsk,
29,2012, 36-44.
[7]. GlobalCement.http://www.globalcement.co
m /magazine/articles/969-the-cement-
industries -of-central
7. Latafat Gardashova. Int. Journal of Engineering Research and Application www.ijera.com
ISSN : 2248-9622, Vol. 6, Issue 10, ( Part -1) October 2016, pp.32-38
www.ijera.com 38 | P a g e
-asia-azerbaijan-kazakhstan-kyrgyzstan-
kyrgyzstan-tajikistan-turkmenistan-and-
uzbekistan.
[8]. http://home.dei.polimi.it/matteucc/
Clustering/tutorial_html/cmeans.html.
[9]. Jang, J.S.R. ANFIS: adaptive-network-
based fuzzy inference system. IEEE
Transactions on Systems, Man and
Cybernetics, 23 (3), 1993, 665–684.
[10]. Keogh E,, Lonardi S., and Ratanamahatana
C., Towards parameter-free data mining.
Proc. 10th ACM SIGKDD International
Conference on Knowledge Discovery and
Data Mining, USA, 2004, 206-215.
[11]. Keogh E.and Lin J., Clustering of time-
series subsequences is meaningless:
Implications for previous and future
research. Knowledge and information
systems.Springer Verlag, - 8(2), 2005,154-
177.
[12]. Lai C., Chung P., and Tweng V., A novel
two-level clustering method for time series
data analysis, Expert Systems with
Applications, USA,37, 2010, 6319-6326.
[13]. Lin J., Vlachos M., Keogh E., and
Gunopulos D., Iterative incremental
clustering of time series, Proc. 9th
International Conference on Database
Technology, Springer Berlin Heidelberg,
2004, 521-522.
[14]. Pierpaolo D’Urso, Elizabeth Ann Maharaj.
Autocorrelation-based fuzzy clustering of
time series .J Fuzzy Sets and Systems - FSS
Netherlands,160(24),2009, 3565-3589.
State Statistic Committee.
http://www.stat.gov.az/
[15]. Wang N. and Chen S., Temperature
prediction and taifex forecasting based on
automatic clustering techniques and two-
factors high-order fuzzy time series, Expert
Systems with Applications, USA, 36, 2009,
2143-2154.