This document provides instructions for disassembling and assembling the steering pump on a 988 XE Wheel Loader E8X powered by a C18 Engine. The disassembly procedure involves removing 29 parts from the pump in 15 steps. The assembly procedure involves assembling the pump in the reverse order of disassembly and includes 29 steps to install parts like seals, springs, pistons, gears, and housing components. Torque specifications are provided for certain fasteners.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Caterpillar Cat 988 988K XE Wheel Loader (Prefix E8X) Service Repair Manual Instant Download (E8X00001 and up).pdf
1. Product: WHEEL LOADER
Model: 988 XE WHEEL LOADER E8X
Configuration: 988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
988K XE Wheel Loader Machine Systems
Media Number -M0080216-01 Publication Date -01/07/2018 Date Updated -12/07/2018
i07190710
Piston Pump (Steering) - Assemble
SMCS - 4306-016-QP; 5070-016-ZH
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
437-3776 Fixture As 1
1U-9129 Adapter Plate 1
1U-5750 Engine Stand 1
B 4C-8359 Lifting Eye Assembly 2
D 1P-0510 Driver Gp 1
E - Loctite 242 -
F 6V-2055 Grease 1
1/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. Illustration 1 g06248518
1. Install O-ring seal (68) into cover (67).
Illustration 2 g06248513
2. Install cover (67) and bolts (66). Tighten bolts (66) to a torque of 28 ± 7 N·m
(248 ± 62 lb in). Install plug (65) and the O-ring seal. Install plug (64) and the O-ring seal.
Illustration 3 g06248859
3. Install bearing (63) and retaining ring (62) onto shaft assembly (61).
2/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 4 g06248509
4. Use a soft faced hammer to install shaft assembly (61) into housing (43).
Illustration 5 g06249254
Illustration 6 g06248624
5. Install O-ring seals (60), O-ring seal (59) into seal carrier (57). Use Tooling (D) to install lip
seals (58) into seal carrier (57).
3/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 7 g06248862
6. Apply Tooling (E) to bolts (56).
7. Install seal carrier (57) and bolts (56) onto the pump housing. Tighten bolts (56) to a torque
of 28 ± 7 N·m (248 ± 62 lb in).
Illustration 8 g06248472
8. Install bearing cradles (55) into housing (43).
Illustration 9 g06248297
4/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 9. Install actuators (52), retainers (54), and bolts (53) onto swashplate (50). Tighten bolts (53)
to a torque of 12 ± 1 N·m (106 ± 9 lb in).
Illustration 10 g06248295
10. Install bearing assemblies (51) onto swashplate (50).
Illustration 11 g06248290
11. Install swashplate (50) into housing (43).
Illustration 12 g06249303
12. Install shims (48) and spring assembly (49) onto barrel (46).
5/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 13 g06248271
13. Install hold down ball (47) onto barrel (46).
Illustration 14 g06248259
14. Install retainer (45) and pistons (44) onto barrel (46).
Illustration 15 g06248257
15. Install rotating group (42) into housing (43).
16. Install O-ring seal (41) into housing (43). Install control actuator (38), spring (40), and bias
actuator (39) into housing (43).
6/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 16 g06249041
Illustration 17 g06248928
17. Install set screw (37A) and (37B) into head assembly (30). Install set screw (37A) to a depth
of 14.3 ± 0.2 mm (0.563 ± 0.008 inch). Install set screw (37B) to a depth of 18 mm
(0.71 inch). Install nuts (36). Tighten nuts (36) to a torque of 190 ± 15 N·m (140 ± 11 lb ft).
Illustration 18 g06248247
18. Install plug (35) and the O-ring seal into head assembly (30). Install plug (34) and the O-
ring seal into head assembly (30).
7/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 19 g06248187
19. Install plug (33) and the O-ring seal into head assembly (30).
Illustration 20 g06248182
20. Install port plate (32) into head assembly (30).
Illustration 21 g06248163
8/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 22 g06248159
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
21. Attach Tooling (B) and a suitable lifting device to head assembly (30). The weight of head
assembly (30) is approximately 26 kg (57 lb). Install head assembly (30) onto the pump
housing. Install bolts (31). Tighten bolts (31) to a torque of 460 ± 60 N·m (339 ± 44 lb ft).
Illustration 23 g06248639
22. Install orifice (27) into pump control (7). Install O-ring seal (28) and plug (29) into pump
control (7).
9/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 24 g06248636
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
23. Install retainer (21), spring (22), spring (23), retainer (24), O-ring seal (25), and adapter (26)
into pump control (7).
24. Install retainer (15), spring (16), spring (17), retainer (18), O-ring seal (19), and adapter (20)
into pump control (7).
Illustration 25 g06248634
25. Install spool (14), O-ring seal (13), and plug (12) into pump control (7). Install spool (10), O
-ring seal (9), and plug (8) into pump control (7). Install O-ring seals (11) into pump control
(7).
10/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 26 g06248097
26. Install pump control (7) and bolts (6). Tighten bolts (6) to a torque of 12 ± 3 N·m
(106 ± 27 lb in).
Illustration 27 g06248082
27. Install O-ring seal (5) onto flange (4).
Illustration 28 g06248079
28. Apply Tooling (E) to bolts (3). Install flange (4) and bolts (3).
11/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 29 g06248087
29. Install coupler (2) and O-ring seal (1) into the flange. Remove the pump from Tooling (A)
or suitable fixture.
End By:
a. Install the steering pump.
12/12
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Product: WHEEL LOADER
Model: 988 XE WHEEL LOADER E8X
Configuration: 988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
988K XE Wheel Loader Machine Systems
Media Number -M0080216-01 Publication Date -01/07/2018 Date Updated -12/07/2018
i05431732
Gear Pump (Secondary Steering) - Remove and Install
SMCS - 4324-010-GT; 4324-010; 5073-010-SST; 5073-010
Removal Procedure
Illustration 1 g03428022
1. Disconnect hose assemblies (1). Remove bolts (3). Use two people to remove gear pump
(2).
Installation Procedure
1. Install gear pump (2) in the reverse order of removal.
1/1
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Product: WHEEL LOADER
Model: 988 XE WHEEL LOADER E8X
Configuration: 988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
988K XE Wheel Loader Machine Systems
Media Number -M0080216-01 Publication Date -01/07/2018 Date Updated -12/07/2018
i05436054
Gear Pump (Secondary Steering) - Disassemble
SMCS - 4324-015-GT; 5073-015-SST
Disassembly Procedure
Start By:
a. Remove the secondary steering pump.
1. Put alignment marks on the secondary steering pump for assembly purposes.
Illustration 1 g03430645
1/7
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 2 g03430650
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (1). Remove body (3) and spacer (2).
Illustration 3 g03430651
2/7
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 4 g03430657
3. Remove O-ring seals (4). Remove pistons (6) and springs (5) from body (3).
Illustration 5 g03430687
Illustration 6 g03430688
4. Remove O-ring seals (9), pistons (8) and springs (10) from body (7).
3/7
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 7 g03430690
Illustration 8 g03430692
5. Remove the bolts (11) that hold flange assembly (12) to pump body (7). Remove flange
assembly (12) from pump body (7).
Illustration 9 g03430693
6. Remove lip seals (13) from flange assembly (12).
4/7
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 10 g03430694
7. Remove O-ring seal (14) and O-ring seals (15) from flange assembly (12).
Illustration 11 g03430695
8. Remove seal assembly (16) and retaining plates (17).
Illustration 12 g03430696
9. Remove front pressure plate (18).
5/7
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Product: WHEEL LOADER
Model: 988 XE WHEEL LOADER E8X
Configuration: 988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
988K XE Wheel Loader Machine Systems
Media Number -M0080216-01 Publication Date -01/07/2018 Date Updated -12/07/2018
i05436056
Gear Pump (Secondary Steering) - Assemble
SMCS - 4324-016-GT; 5073-016-SST
Specifications
Illustration 1 g03192956
Table 1
1/6
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Specification for 150-7585 Gear Pump Gp
Item Qty Part Specification Description
- - - Displacement per revolution is 83 cc (5.1 cubic inch).
1 8 0S-1595 Bolt Torque to 115 ± 7 N·m (85 ± 5 lb ft).
2 6 1B-2886 Bolt Torque to 115 ± 7 N·m (85 ± 5 lb ft).
3 1 142-2137 Plug Torque to 24 ± 3 N·m (212 ± 27 lb in).
4 1 9S-8005 O-Ring Plug Torque to 284 ± 40 N·m (209 ± 30 lb ft).
Assembly Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Illustration 2 g03431023
Note: Install the corners of the seals toward the rear of the pump body. Install the brass face of
the pressure plate toward the gears.
1. Install seals (22), seal assembly (23), retaining plates (24) and rear pressure plate (21).
2/6
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 3 g03430697
2. Install gear assemblies (19) and (20).
Illustration 4 g03430696
Illustration 5 g03430695
Note: Install the brass face of the pressure plate toward the gears. Install the corners of the
seals toward the front of the pump body.
3. Install front pressure plate (18), retaining plates (17) and seal assembly (16).
3/6
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Suggest:
For more complete manuals. Please go to
the home page.
https://www.ebooklibonline.com
If the above button click is invalid. Please
download this document first, and then
click the above link to download the
complete manual.
Thank you so much for reading
24. Illustration 6 g03430694
4. Install seals (15) and O-ring seal (14) on flange assembly (12).
Illustration 7 g03430693
Note: Install the back of each lip seal against the back of the other lip seal.
5. Use Tooling (A) in order to install lip seals (13) in flange assembly (12).
Illustration 8 g03430692
4/6
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 9 g03430690
6. Install flange assembly (12) and the bolts (11) that hold flange assembly (12) to pump body (7).
Tighten bolts (11) to a torque of 115 ± 7 N·m (85 ± 5 lb ft).
7. Turn the shaft of the pump in order to ensure that the shaft turns freely. The shaft should not
bind in any direction.
Illustration 10 g03430687
8. Install O-ring seals (9), pistons (8) and springs (10) on body (7).
Illustration 11 g03430651
9. Install O-ring seals (4), pistons (6) and springs (5) on body (3).
5/6
988K XE Wheel Loader E8X00001-UP (MACHINE) POWERED BY C18 Engine(M...
2021/12/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...