This document provides instructions for disassembling the transmission and torque converter of a wheel loader model. It lists over 40 detailed steps and accompanying illustrations to remove components like gears, clutches, seals, bearings, and housings. Special tools are required for tasks like compressing springs and removing press-fit parts. Cleanliness and fluid containment are emphasized throughout the process.
Caterpillar Cat 924H and 924Hz Wheel Loader (Prefix JTM) Service Repair Manua...fijsekkdmdm2w
The document provides disassembly instructions for a transmission and torque converter on a wheel loader model. It lists over 40 steps to disassemble various components using specialized tools, including removing housing assemblies, gears, bearings, seals, plates, discs, pistons, springs, and sensors. Cleanliness is emphasized throughout the process to prevent contamination of parts.
Caterpillar Cat 924H and 924Hz Wheel Loader (Prefix JTM) Service Repair Manua...onyvzcwadtu05
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It describes 34 steps to disassemble the components, including removing bolts, seals, gears, bearings, plates, discs, pistons, springs, and other parts. Precautions are outlined for releasing spring tension and containing fluids. Required tools include lever pullers, link brackets, jack stands, shackles, forcing screws, retaining ring pliers, slide hammers, compressors, drivers, crossblocks, legs, and puller plates.
Caterpillar Cat 924H and 924Hz Wheel Loader (Prefix JTM) Service Repair Manua...ze3xiandiao
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It describes 34 steps to disassemble the components, including removing bolts, seals, gears, bearings, plates, discs, pistons, springs, and other parts. Precautions are outlined for releasing spring tension and containing fluids. Required tools include lever pullers, link brackets, jack stands, shackles, forcing screws, retaining ring pliers, slide hammers, compressors, drivers, crossblocks, legs, and puller plates.
This document provides instructions for disassembling the transmission and torque converter of a 924HZ wheel loader. It outlines 48 steps to remove various components such as housing assemblies, gears, clutches, seals, bearings and other parts. Precautions are listed to prevent fluid loss and entry of contaminants. Required tools include lever pullers, jack stands, retaining ring pliers, drivers, compressors and other specialized equipment to separate components and remove securing components.
This document provides instructions for disassembling the transmission and torque converter of a 924HZ wheel loader. It outlines 48 steps to remove various components such as housing assemblies, gears, clutches, seals, bearings and other parts. Precautions are listed to prevent fluid loss and entry of contaminants. Required tools include lever pullers, jack stands, retaining ring pliers, drivers, compressors and other specialized equipment to separate components in a clean and safe manner.
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It outlines 49 steps to fully disassemble the components, including removing housing assemblies, gears, clutches, bearings, seals and other parts. Special tools are required for tasks like removing retaining rings, compressing springs and separating connected pieces. Cleanliness is important during disassembly to prevent contamination of parts.
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It describes in detail how to remove over 30 components using various tools. Key steps include removing the transmission oil pump, then lifting out the transmission and torque converter as a unit. Multiple gears, bearings, seals, and clutch assemblies must then be dismantled using retaining ring pliers and pullers to access all internal parts. Cleanliness is emphasized throughout to prevent contamination.
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It outlines 49 steps to fully disassemble the components, including removing housing assemblies, gears, clutches, bearings, seals and other parts. Special tools are required for tasks like removing retaining rings, compressing springs and separating connected pieces. Cleanliness is important during disassembly to prevent contamination of parts.
Caterpillar Cat 924H and 924Hz Wheel Loader (Prefix JTM) Service Repair Manua...fijsekkdmdm2w
The document provides disassembly instructions for a transmission and torque converter on a wheel loader model. It lists over 40 steps to disassemble various components using specialized tools, including removing housing assemblies, gears, bearings, seals, plates, discs, pistons, springs, and sensors. Cleanliness is emphasized throughout the process to prevent contamination of parts.
Caterpillar Cat 924H and 924Hz Wheel Loader (Prefix JTM) Service Repair Manua...onyvzcwadtu05
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It describes 34 steps to disassemble the components, including removing bolts, seals, gears, bearings, plates, discs, pistons, springs, and other parts. Precautions are outlined for releasing spring tension and containing fluids. Required tools include lever pullers, link brackets, jack stands, shackles, forcing screws, retaining ring pliers, slide hammers, compressors, drivers, crossblocks, legs, and puller plates.
Caterpillar Cat 924H and 924Hz Wheel Loader (Prefix JTM) Service Repair Manua...ze3xiandiao
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It describes 34 steps to disassemble the components, including removing bolts, seals, gears, bearings, plates, discs, pistons, springs, and other parts. Precautions are outlined for releasing spring tension and containing fluids. Required tools include lever pullers, link brackets, jack stands, shackles, forcing screws, retaining ring pliers, slide hammers, compressors, drivers, crossblocks, legs, and puller plates.
This document provides instructions for disassembling the transmission and torque converter of a 924HZ wheel loader. It outlines 48 steps to remove various components such as housing assemblies, gears, clutches, seals, bearings and other parts. Precautions are listed to prevent fluid loss and entry of contaminants. Required tools include lever pullers, jack stands, retaining ring pliers, drivers, compressors and other specialized equipment to separate components and remove securing components.
This document provides instructions for disassembling the transmission and torque converter of a 924HZ wheel loader. It outlines 48 steps to remove various components such as housing assemblies, gears, clutches, seals, bearings and other parts. Precautions are listed to prevent fluid loss and entry of contaminants. Required tools include lever pullers, jack stands, retaining ring pliers, drivers, compressors and other specialized equipment to separate components in a clean and safe manner.
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It outlines 49 steps to fully disassemble the components, including removing housing assemblies, gears, clutches, bearings, seals and other parts. Special tools are required for tasks like removing retaining rings, compressing springs and separating connected pieces. Cleanliness is important during disassembly to prevent contamination of parts.
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It describes in detail how to remove over 30 components using various tools. Key steps include removing the transmission oil pump, then lifting out the transmission and torque converter as a unit. Multiple gears, bearings, seals, and clutch assemblies must then be dismantled using retaining ring pliers and pullers to access all internal parts. Cleanliness is emphasized throughout to prevent contamination.
This document provides disassembly instructions for a 924H wheel loader transmission and torque converter. It outlines 49 steps to fully disassemble the components, including removing housing assemblies, gears, clutches, bearings, seals and other parts. Special tools are required for tasks like removing retaining rings, compressing springs and separating connected pieces. Cleanliness is important during disassembly to prevent contamination of parts.
This document provides disassembly instructions for the transmission and torque converter of a 928HZ wheel loader model. It outlines 47 steps to fully disassemble these components, including removing housing assemblies, gears, clutches, seals, bearings and other internal parts. Many steps require the use of specialized tools to compress springs, remove retaining rings, separate connected pieces and lift heavy subassemblies weighing over 100 lbs. Cleanliness is emphasized throughout to prevent contamination of parts during disassembly.
This document provides disassembly instructions for the transmission and torque converter of a 928HZ wheel loader model. It outlines 47 steps to fully disassemble these components, including removing housing assemblies, gears, clutches, seals, bearings and other internal parts. Many steps require the use of specialized tools to compress springs, remove retaining rings, separate connected pieces and lift heavy subassemblies weighing over 100 lbs. Cleanliness is emphasized throughout to prevent contamination of parts during disassembly.
This document provides instructions for disassembling the transmission and torque converter of a wheel loader. It describes removing over 30 components in a specific sequence, including removing identification marks, cleaning parts, draining fluids, and using various tools to separate housings, remove seals, bearings, gears, plates, rings, and other parts. Precautions are outlined for releasing spring forces and preventing fluid loss or contamination during disassembly.
This document provides disassembly instructions for a 924HZ wheel loader transmission and torque converter. It outlines 48 steps to fully disassemble the transmission, including removing housing assemblies, gears, shafts, bearings, seals, and clutch groups. Various specialty tools are required to separate components and remove retaining rings. Precautions are listed to prevent fluid loss and contamination during disassembly.
The document provides disassembly instructions for a 924HZ wheel loader transmission and torque converter. It outlines 48 steps to disassemble the transmission housing, remove internal components like gears, shafts, and clutches. Precautions are listed to prevent fluid loss and contamination. Required specialty tools are also identified to aid in disassembly of components like bearings, seals, and springs.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix RTA) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists 50 steps to completely disassemble the transmission, removing components like gears, plates, seals, bearings, and clutch groups. Special tools are required for tasks like compressing clutch springs and removing certain parts. Cleanliness is emphasized throughout to prevent dirt from contaminating internal parts.
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and gives step-by-step instructions with illustrations. Some key steps include removing the torque converter, valve assemblies, gears, bearing cups, clutch groups, seals, plates, discs, retainers, springs and other internal components. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanisms.
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and gives step-by-step instructions with illustrations. Some key steps include removing the torque converter, valve assemblies, gears, bearing cups, clutch groups, seals, plates, discs, retainers, springs and other internal components. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanisms.
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
Volvo EC55-2 Compact Excavator Parts Catalogue Manual – SN 5001 - 7620.pdfjnnfnjsdnnd
This document contains specifications for various engine parts for a Volvo EC55-2 engine. It includes sections for the engine, cylinder head, valves, pistons, connecting rods, camshaft, and other components. Each section lists the relevant part numbers, descriptions, quantities, and other details. The document provides an extensive catalogue of replacement parts for this engine model.
Kubota B1241D-EC-F2-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA516...jnnfnjsdnnd
This document provides a parts list for frequently used items and their information. It includes 30 parts ranging from switches and fuses to hoses and filters. Each part is listed with its number, name in Polish and English, quantity, and other identifying information like serial number and weight. The document is copyrighted by KUBOTA in 2015.
Kubota B1700D Tractor Parts Catalogue Manual (Publishing ID BKIDK0093).pdfjnnfnjsdnnd
This document provides a parts list for a crankcase (Kurbelgehäuse) with part numbers, names, quantities, serial numbers, and other details. It lists over 200 individual part numbers. The parts are for various engine components, including the crankcase, oil pan, cylinder head, gear case, and head cover.
Kubota B1181DT-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA51...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 20 parts that make up the main bearing case assembly. Key components listed include the main bearing case group, bearing case cover, oil seal, gaskets, bolts, and bearing shells. The document also provides copyright information at the bottom of each page.
Kubota B1241D-EC-F Tractor Parts Catalogue Manual (Publishing ID BKIDA5131).pdfjnnfnjsdnnd
This document provides a list of parts for an engine. It includes the part numbers, names in Polish and English, quantities, and other specifications for 230 different engine parts organized into categories like crankcase, oil pan, cylinder head, gear case, and head cover. The parts range from bolts, nuts, and plugs to larger assemblies and components like the crankcase, cylinder head, and gear case.
Kubota B1181D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5129).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. It appears to be a comprehensive listing of components for a Kubota engine.
Kubota B1121D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 100 individual parts that make up the main bearing case assembly. The parts include the main bearing case group, bolts, pins, seals, gaskets, covers, and bearings.
Kubota B1161D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a list of parts for a Kubota engine crankcase assembly. It includes 140 individual parts with information on part numbers, names, quantities, and other specifications. The crankcase assembly consists of a composite crankcase component as the main part, along with various caps, plugs, pins, bolts, and other fittings that make up the full assembly. Safety precautions are noted for proper handling of the engine parts.
Kubota B1161D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5128).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. This extensive list details all replacement parts for the engine.
Kubota B1121D-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA5156).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine, including the part numbers, names, quantities, and weights of various engine components. It lists 190 line items of parts organized into categories like crankcase, oil pan, cylinder head, gear case, and more. The document is in two languages, with the part names listed in both Polish and English.
Kubota B1121D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5127).pdfjnnfnjsdnnd
This document provides a parts list for an engine. It includes 260 parts related to the engine, such as the crankcase, cylinder head, oil pan, gear case, and more. Each part is listed with its number, name in Polish and English, quantity, and other specifications. It appears to be a comprehensive listing of engine parts for reference when maintaining or repairing the engine.
Kubota B1121D Tractor Parts Catalogue Manual (Publishing ID BKIDA5126).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine. It lists 190 parts in the engine's crankcase, oil pan, cylinder head, gear case, head cover, oil filter, dipstick/guide, and oil pump systems. The parts are identified by number, name in Polish and English, quantity, and other specifications. Kubota claims copyright of the document from 2015.
More Related Content
Similar to Caterpillar Cat 924Hz Wheel Loader (Prefix PED) Service Repair Manual (PED00001 and up).pdf
This document provides disassembly instructions for the transmission and torque converter of a 928HZ wheel loader model. It outlines 47 steps to fully disassemble these components, including removing housing assemblies, gears, clutches, seals, bearings and other internal parts. Many steps require the use of specialized tools to compress springs, remove retaining rings, separate connected pieces and lift heavy subassemblies weighing over 100 lbs. Cleanliness is emphasized throughout to prevent contamination of parts during disassembly.
This document provides disassembly instructions for the transmission and torque converter of a 928HZ wheel loader model. It outlines 47 steps to fully disassemble these components, including removing housing assemblies, gears, clutches, seals, bearings and other internal parts. Many steps require the use of specialized tools to compress springs, remove retaining rings, separate connected pieces and lift heavy subassemblies weighing over 100 lbs. Cleanliness is emphasized throughout to prevent contamination of parts during disassembly.
This document provides instructions for disassembling the transmission and torque converter of a wheel loader. It describes removing over 30 components in a specific sequence, including removing identification marks, cleaning parts, draining fluids, and using various tools to separate housings, remove seals, bearings, gears, plates, rings, and other parts. Precautions are outlined for releasing spring forces and preventing fluid loss or contamination during disassembly.
This document provides disassembly instructions for a 924HZ wheel loader transmission and torque converter. It outlines 48 steps to fully disassemble the transmission, including removing housing assemblies, gears, shafts, bearings, seals, and clutch groups. Various specialty tools are required to separate components and remove retaining rings. Precautions are listed to prevent fluid loss and contamination during disassembly.
The document provides disassembly instructions for a 924HZ wheel loader transmission and torque converter. It outlines 48 steps to disassemble the transmission housing, remove internal components like gears, shafts, and clutches. Precautions are listed to prevent fluid loss and contamination. Required specialty tools are also identified to aid in disassembly of components like bearings, seals, and springs.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix RTA) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists 50 steps to completely disassemble the transmission, removing components like gears, plates, seals, bearings, and clutch groups. Special tools are required for tasks like compressing clutch springs and removing certain parts. Cleanliness is emphasized throughout to prevent dirt from contaminating internal parts.
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and gives step-by-step instructions with illustrations. Some key steps include removing the torque converter, valve assemblies, gears, bearing cups, clutch groups, seals, plates, discs, retainers, springs and other internal components. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanisms.
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and gives step-by-step instructions with illustrations. Some key steps include removing the torque converter, valve assemblies, gears, bearing cups, clutch groups, seals, plates, discs, retainers, springs and other internal components. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanisms.
Similar to Caterpillar Cat 924Hz Wheel Loader (Prefix PED) Service Repair Manual (PED00001 and up).pdf (8)
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
Volvo EC55-2 Compact Excavator Parts Catalogue Manual – SN 5001 - 7620.pdfjnnfnjsdnnd
This document contains specifications for various engine parts for a Volvo EC55-2 engine. It includes sections for the engine, cylinder head, valves, pistons, connecting rods, camshaft, and other components. Each section lists the relevant part numbers, descriptions, quantities, and other details. The document provides an extensive catalogue of replacement parts for this engine model.
Kubota B1241D-EC-F2-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA516...jnnfnjsdnnd
This document provides a parts list for frequently used items and their information. It includes 30 parts ranging from switches and fuses to hoses and filters. Each part is listed with its number, name in Polish and English, quantity, and other identifying information like serial number and weight. The document is copyrighted by KUBOTA in 2015.
Kubota B1700D Tractor Parts Catalogue Manual (Publishing ID BKIDK0093).pdfjnnfnjsdnnd
This document provides a parts list for a crankcase (Kurbelgehäuse) with part numbers, names, quantities, serial numbers, and other details. It lists over 200 individual part numbers. The parts are for various engine components, including the crankcase, oil pan, cylinder head, gear case, and head cover.
Kubota B1181DT-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA51...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 20 parts that make up the main bearing case assembly. Key components listed include the main bearing case group, bearing case cover, oil seal, gaskets, bolts, and bearing shells. The document also provides copyright information at the bottom of each page.
Kubota B1241D-EC-F Tractor Parts Catalogue Manual (Publishing ID BKIDA5131).pdfjnnfnjsdnnd
This document provides a list of parts for an engine. It includes the part numbers, names in Polish and English, quantities, and other specifications for 230 different engine parts organized into categories like crankcase, oil pan, cylinder head, gear case, and head cover. The parts range from bolts, nuts, and plugs to larger assemblies and components like the crankcase, cylinder head, and gear case.
Kubota B1181D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5129).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. It appears to be a comprehensive listing of components for a Kubota engine.
Kubota B1121D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 100 individual parts that make up the main bearing case assembly. The parts include the main bearing case group, bolts, pins, seals, gaskets, covers, and bearings.
Kubota B1161D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a list of parts for a Kubota engine crankcase assembly. It includes 140 individual parts with information on part numbers, names, quantities, and other specifications. The crankcase assembly consists of a composite crankcase component as the main part, along with various caps, plugs, pins, bolts, and other fittings that make up the full assembly. Safety precautions are noted for proper handling of the engine parts.
Kubota B1161D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5128).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. This extensive list details all replacement parts for the engine.
Kubota B1121D-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA5156).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine, including the part numbers, names, quantities, and weights of various engine components. It lists 190 line items of parts organized into categories like crankcase, oil pan, cylinder head, gear case, and more. The document is in two languages, with the part names listed in both Polish and English.
Kubota B1121D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5127).pdfjnnfnjsdnnd
This document provides a parts list for an engine. It includes 260 parts related to the engine, such as the crankcase, cylinder head, oil pan, gear case, and more. Each part is listed with its number, name in Polish and English, quantity, and other specifications. It appears to be a comprehensive listing of engine parts for reference when maintaining or repairing the engine.
Kubota B1121D Tractor Parts Catalogue Manual (Publishing ID BKIDA5126).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine. It lists 190 parts in the engine's crankcase, oil pan, cylinder head, gear case, head cover, oil filter, dipstick/guide, and oil pump systems. The parts are identified by number, name in Polish and English, quantity, and other specifications. Kubota claims copyright of the document from 2015.
The document provides instructions for removing the planetary carrier from the final drive of a D9R track-type tractor. It describes:
1) Removing the axles, cover, and bolts to access the carrier.
2) Using an adapter tool to lift the carrier out of the final drive hub.
3) Removing the sun gear from the carrier.
It then provides detailed steps and illustrations for safely removing and installing the carrier while supporting the surrounding components.
The document provides instructions for disassembling and assembling the final drive of a D7R track-type tractor. It lists 30 steps for disassembly, including removing gears, shafts, bearings and seals. It also lists 25 steps for assembly, installing components in reverse order and noting proper alignment and clearance measurements. Required specialized tools are listed for various removal and installation tasks.
This document provides instructions for installing and removing various components of a Caterpillar 3412E engine, including:
1) Installing the aftercooler housing and core on a 3408E/3412E engine.
2) Removing and installing the front engine support on a 3408E/3412E engine.
3) Removing the rear gear group from a 3408E/3412E engine, which involves disassembling various gears, bearings, and shafts.
4) Installing the rear gear group on a 3408E/3412E engine, which involves assembling the various gears, bearings, and shafts.
The document provides instructions for removing and installing a cylinder head on a Caterpillar D9N track-type tractor powered by a 3408 engine. It describes:
1) Removing hoses, tubes, bolts and the fuel manifold to access the cylinder head.
2) Attaching lifting tools and removing the cylinder head, which weighs approximately 90-172 kg depending on the engine model.
3) Cleaning and inspecting parts, applying a new gasket and reinstalling the cylinder head along with associated components like seals and bolts. Tightening bolts in a specific sequence is emphasized.
The document provides instructions for removing, disassembling, and installing a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then removing the compression brake by lifting it out while holding the oil tube. It also details disassembling the compression brake by removing pistons, springs, seals and other components. The assembly process is described as well, including installing new seals and pistons before reinstalling the compression brake.
The document provides instructions for disassembling a steering planetary and brake assembly. Key steps include:
1. Removing the final drive, planetary group, and brake assembly from the machine.
2. Separating the planetary group and brake assembly from the final drive hub using lifting brackets and forcing bolts.
3. Further disassembling the planetary group and brake assembly by removing housing components like ring gears, plates, and carriers to access internal parts like gears, shafts, pins, and seals.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 924HZ WHEEL LOADER PED
Configuration: 924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train
Media Number -KENR7606-09 Publication Date -01/03/2015 Date Updated -09/10/2017
i07376985
Transmission and Torque Converter - Disassemble
SMCS - 3001-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-9200 Lever Puller Hoist 1
138-7575 Link Bracket 3
B
8T-0372
Bolt
M12 - 1.75 by 90mm
3
180-3033 Jack Stand Gp 2
180-3032 Jack Stand Gp 1
189-0410 Shackle As 2
C 8T-0644
Bolt
M10 - 1.5 by 90mm
2
D
1U-9200 Lever Puller Hoist 1
138-7575 Link Bracket 4
189-0409 Shackle As 1
E 154-6181 Forcing Screw 2
F 136-1452 Retaining Ring Pliers As 1
G 1P-0074 Slide Hammer Puller Gp 1
4C-5653 Threaded Adapter 1
1/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. H 1P-1863 Retaining Ring Pliers 1
J 4C-6136 Lifting Bracket 1
K 1P-1861 Retaining Ring Pliers 1
L 1P-0510 Driver Gp 1
M 4C-3652 Compressor Assembly 1
N 1P-1857 Retaining Ring Pliers 1
P
1P-2322 Combination Puller 1
1P-0510 Driver Gp 1
Q
1U-9889 Crossblock 1
3H-0469 Leg 2
3H-0468 Puller Plate 4
1A-1935 Full Nut 2
1U-7540 Hydraulic Cylinder 1
1U-5230 Hand Hydraulic Pump 1
1H-3110 Bearing Puller Gp 1
R 4C-6399 Compressor Assembly 1
Start By:
a. Remove the transmission oil pump. Refer to Disassembly and Assembly, "Transmission Oil
Pump - Remove".
b. Remove the transmission and the torque converter. Refer to Disassembly and Assembly,
"Transmission and Torque Converter - Remove".
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and
on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies.
This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior
of the components should be thoroughly cleaned. This will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
times.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
2/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01392601
1. Attach Tooling (A) and a suitable lifting device to the transmission and the torque
converter. The weight of the transmission and torque converter is approximately 476 kg
(1050 lb).
Illustration 2 g01392602
2. Remove bolts (1) and sight gauge (2).
3/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 3 g01392621
3. Position the transmission and the torque converter onto Tooling (B), as shown.
Illustration 4 g01392620
4. Remove bolts (3) and coupling (4).
Illustration 5 g01392597
5. Remove torque converter (5).
4/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 6 g01392622
Illustration 7 g01392630
6. Remove bolts (6). Use Tooling (C) and suitable prybars to remove plate (7).
Illustration 8 g01392632
7. Remove O-ring seal (8) from plate (7).
5/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 9 g01392635
8. Remove O-ring seals (9).
Illustration 10 g01392639
9. Remove hose assembly (10). Disconnect the lower half harness assembly (12) and secure
the harness assembly to control valve (11).
6/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 11 g01393407
10. Attach Tooling (D) and a suitable lifting device to housing assembly (13). The weight of
housing assembly (13) is approximately 141 kg (310 lb).
Illustration 12 g01393411
11. Use Tooling (E) to separate the housings. Remove housing assembly (13).
7/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 16 g01395864
14. Use Tooling (F) to remove retaining ring (19).
Illustration 17 g01396011
15. Use Tooling (G) in a rotating pattern to remove bearing assembly (20).
Illustration 18 g01396014
9/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engine...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. 16. Use Tooling (H) to remove retaining ring (23). Remove bearing support (21). Remove
bearing (22) from bearing support (21).
Illustration 19 g01396015
17. Remove bearing cup (24) and bearings (25).
Illustration 20 g01396258
18. Remove sensors (28).
19. Use Tooling (J) and a suitable lifting device to remove the forward low and the forward
high clutch group (26). The weight of clutch group (26) is approximately 27 kg (60 lb).
Position shaft assembly (27) out of the way and remove clutch group (26).
Note: When the clutch groups are disassembled, remove the plugs in the shaft to clean the
oil passages. Use a punch to drive the plug into the shaft . Drill the remainder of the
aluminum plug out of the bore. Be careful not to drill any portion of the walls of the bore.
Use shop air or a cleaning solution to clean the shafts.
10/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 21 g01397406
20. Remove retaining ring (29) and thrust disc (30).
Illustration 22 g01397412
21. Remove gear assembly (31).
Illustration 23 g01396271
22. Use Tooling (H) to remove retaining ring (33). Use Tooling (L) to remove hub (32) from
gear assembly (31).
11/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 24 g01396539
23. Use Tooling (K) to remove retaining ring (34). Use Tooling (L) to remove bearing (35)
from hub (32).
Illustration 25 g01396540
24. Remove thrust disc (36).
12/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 26 g01397401
25. Remove retaining ring (37) and plate (38). Remove discs (39) and plates (40).
Note: Note the location of plates and discs for assembly purposes.
Illustration 27 g01397484
13/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
26. Install Tooling (M) onto retainer (42). Use Tooling (M) and a suitable press to compress the
clutch spring. Remove retaining ring (41). Slowly release the spring tension.
Illustration 28 g01397502
27. Remove retainer (42) and spring (43).
28. Remove piston (44).
14/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
30. If equipped, remove valve assembly (53). Remove seal (48), retaining ring (47), retainer
(49), spring (50), and ball (51) from body (52).
31. Remove rings (46).
Illustration 31 g01397884
32. Reposition clutch group (26), as shown. Remove retaining ring (54), thrust disc (55), and
hub (56).
Illustration 32 g01397964
33. Use Tooling (K) to remove retaining ring (57) from hub (56). Remove bearing (58).
16/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 33 g01397953
34. Remove thrust disc (59).
35. Repeat Steps 25 through 30 to disassemble the clutch pack.
Illustration 34 g01397984
36. Attach Tooling (J) and a suitable lifting device to the reverse and second clutch group (60).
The weight of clutch group (60) is approximately 32 kg (70 lb). Position clutch group (60)
onto suitable blocking.
Illustration 35 g01397987
17/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. 37. Remove retaining ring (61), thrust disc (62), and gear (63).
Illustration 36 g01398268
38. Use Tooling (H) to remove retaining ring (65). Use Tooling (L) to remove hub (64) from
gear (63).
Illustration 37 g01398270
39. Use Tooling (K) to remove retaining ring (66). Use Tooling (L) to remove bearing (67)
from hub (64).
18/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 38 g01398284
40. Remove thrust disc (68).
41. Repeat Steps 25 through 30 for the disassembly of the clutch pack.
Illustration 39 g01398178
42. Use Tooling (P) to remove bearing (69).
19/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. 44. Remove gear (75).
Illustration 42 g01398437
45. Use Tooling (H) to remove retaining ring (77). Use Tooling (L) to remove hub (76) from
gear (75).
Illustration 43 g01398456
46. Use Tooling (K) to remove retaining ring (78). Use Tooling (L) to remove bearing (79)
from hub (76).
21/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 44 g01398438
47. Remove thrust disc (80).
48. Repeat Steps 25 through 30 for the disassembly of the clutch pack.
Illustration 45 g01398560
49. Attach Tooling (J) and a suitable lifting device to first gear and third gear clutch group (81).
The weight of clutch group (81) is approximately 45 kg (100 lb). Remove clutch group (81).
Illustration 46 g01398561
50. Remove retaining ring (82), thrust disc (83), and gear (84).
22/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Illustration 47 g01398645
51. Use Tooling (H) to remove retaining ring (86). Use Tooling (L) to remove hub (85) from
gear (84).
Illustration 48 g01398657
52. Use Tooling (K) to remove retaining ring (87). Use Tooling (L) to remove bearing (88)
from hub (85).
23/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Illustration 49 g01398664
53. Remove thrust disc (89).
54. Repeat Steps 25 through 30 for the disassembly of the clutch pack.
Illustration 50 g01398562
Illustration 51 g01398564
55. Install Tooling (Q), as shown. Use Tooling (Q) to remove bearing (90). Extend the cylinder
several times to remove bearing (90). Use spacers, as needed.
24/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Illustration 52 g01398565
56. Remove spacer (91) and gear (92).
Illustration 53 g01398567
57. Remove thrust disc (93) and gear (94).
Illustration 54 g01398773
58. Use Tooling (H) to remove retaining ring (95). Remove hub (96) from gear (94). Use
Tooling (L) to remove bearing (97).
Illustration 55 g01398774
25/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. 59. Remove thrust disc (98) and washer (99).
Illustration 56 g01398776
60. Remove retaining ring (100) and plate (101).
61. Remove clutch plates and discs (103).
Note: Note the positions of the plates and discs for assembly purposes.
62. Remove retaining ring (102).
Illustration 57 g01398814
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
26/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. 63. Position Tooling (R) onto seal assembly (105). Use Tooling (R) and a suitable press to
compress the clutch spring. Remove retaining ring (104). Slowly release the spring tension.
Illustration 58 g01398781
64. Remove ring (106) and seal assembly (105).
Illustration 59 g01398796
65. Remove spring (107) and piston (108).
Illustration 60 g01398985
66. Remove seals (109).
27/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
29. Illustration 61 g01398975
67. Remove input shaft assembly (110).
Illustration 62 g01399007
68. Use a suitable press to remove carrier (111) and bearing cone (113). Remove ring seal (112)
from carrier (111). Remove gear (114).
69. Use a suitable press to remove bearing cone (116). Remove gear (115).
28/33
924H 924Hz Wheel Loader PED00001-UP (MACHINE) POWERED BY C6.6 Engi...
2021/1/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
30. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/