The document provides instructions for removing and installing various components related to the diesel exhaust fluid system for a Caterpillar 730C Ejector Articulated Truck. It includes illustrated step-by-step instructions for removing and installing items like the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. Safety notices are also provided regarding hot coolant and spilled fuel.
Caterpillar cat 730 c ejector articulated truck (prefix tfh) service repair m...fjsekkdkmem
The document provides instructions for removing and installing various components of a 730C Ejector Articulated Truck, including the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. The procedures describe disconnecting hoses and electrical connections, removing mounting hardware, and installing components in the reverse order while applying specified torques to fasteners. Safety notices are included regarding hot coolant, fuel leaks, and proper fluid disposal.
Caterpillar cat 730 c ejector articulated truck (prefix tfh) service repair m...fusjekksmewsx
The document provides instructions for removing and installing various components of a 730C Ejector Articulated Truck, including the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. The procedures describe disconnecting hoses and electrical connections, removing mounting hardware, and replacing seals before reinstalling components in the reverse order of removal while tightening fasteners to the specified torques. Safety notices are included regarding hot coolant, fuel leaks, and proper fluid disposal.
Caterpillar cat 730 c ejector articulated truck (prefix tfh) service repair m...ufjsjekjkeme
The document provides instructions for removing and installing various components of a 730C Ejector Articulated Truck, including the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. The procedures include disconnecting hoses and electrical connections, removing mounting hardware, and installing components in the reverse order while applying specified torques to fasteners. Safety notices are also provided regarding hot coolant, fuel leaks, and contained fluid disposal.
The document is a service repair manual that provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a 730C Ejector articulated truck. It includes illustrated step-by-step procedures for removing and installing the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and fuel solenoid valve. Safety notices are provided and proper torque specifications are listed for reinstallation.
The document is a service repair manual that provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a 730C Ejector articulated truck. It includes illustrated step-by-step procedures for removing and installing the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and fuel solenoid valve. Safety notices are provided and proper torque specifications are listed for reinstallation.
The document is a service repair manual that provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a 730C Ejector Articulated Truck. It includes illustrated step-by-step procedures for servicing the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and ARD fuel solenoid valve. Safety notices are also provided regarding the potential hazards of hot coolant and spilled fuel.
The document provides instructions for removing and assembling a torque converter for a 730C2 articulated truck. It lists the required tools and gives step-by-step procedures with accompanying illustrations. The torque converter components are removed in the order of the housing assembly, piston, plates and discs, turbine, impeller, carrier, and stator parts. Assembly is the reverse of disassembly, with notes to clean parts and apply specified torques.
The document provides instructions for removing and assembling components of the torque converter for a 730C2 Articulated Truck. It lists the required tools and presents step-by-step procedures with accompanying illustrations for removing the torque converter housing, disassembling internal components, and assembling the housing. Key steps include using lifting devices to handle heavy components safely, marking parts for proper reinstallation, and noting torque specifications for fasteners.
Caterpillar cat 730 c ejector articulated truck (prefix tfh) service repair m...fjsekkdkmem
The document provides instructions for removing and installing various components of a 730C Ejector Articulated Truck, including the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. The procedures describe disconnecting hoses and electrical connections, removing mounting hardware, and installing components in the reverse order while applying specified torques to fasteners. Safety notices are included regarding hot coolant, fuel leaks, and proper fluid disposal.
Caterpillar cat 730 c ejector articulated truck (prefix tfh) service repair m...fusjekksmewsx
The document provides instructions for removing and installing various components of a 730C Ejector Articulated Truck, including the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. The procedures describe disconnecting hoses and electrical connections, removing mounting hardware, and replacing seals before reinstalling components in the reverse order of removal while tightening fasteners to the specified torques. Safety notices are included regarding hot coolant, fuel leaks, and proper fluid disposal.
Caterpillar cat 730 c ejector articulated truck (prefix tfh) service repair m...ufjsjekjkeme
The document provides instructions for removing and installing various components of a 730C Ejector Articulated Truck, including the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. The procedures include disconnecting hoses and electrical connections, removing mounting hardware, and installing components in the reverse order while applying specified torques to fasteners. Safety notices are also provided regarding hot coolant, fuel leaks, and contained fluid disposal.
The document is a service repair manual that provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a 730C Ejector articulated truck. It includes illustrated step-by-step procedures for removing and installing the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and fuel solenoid valve. Safety notices are provided and proper torque specifications are listed for reinstallation.
The document is a service repair manual that provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a 730C Ejector articulated truck. It includes illustrated step-by-step procedures for removing and installing the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and fuel solenoid valve. Safety notices are provided and proper torque specifications are listed for reinstallation.
The document is a service repair manual that provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a 730C Ejector Articulated Truck. It includes illustrated step-by-step procedures for servicing the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and ARD fuel solenoid valve. Safety notices are also provided regarding the potential hazards of hot coolant and spilled fuel.
The document provides instructions for removing and assembling a torque converter for a 730C2 articulated truck. It lists the required tools and gives step-by-step procedures with accompanying illustrations. The torque converter components are removed in the order of the housing assembly, piston, plates and discs, turbine, impeller, carrier, and stator parts. Assembly is the reverse of disassembly, with notes to clean parts and apply specified torques.
The document provides instructions for removing and assembling components of the torque converter for a 730C2 Articulated Truck. It lists the required tools and presents step-by-step procedures with accompanying illustrations for removing the torque converter housing, disassembling internal components, and assembling the housing. Key steps include using lifting devices to handle heavy components safely, marking parts for proper reinstallation, and noting torque specifications for fasteners.
The document provides instructions for removing and disassembling a torque converter from a 730C2 articulated truck with a C13 engine. It lists the required tools and presents step-by-step instructions with accompanying illustrations. The instructions describe removing the torque converter housing, then disassembling internal components like the piston, plates, discs, bearings, and impeller. Reassembly instructions are also provided.
The document provides instructions for removing and disassembling a torque converter from a Caterpillar 730C2 articulated truck. It describes 18 steps to disassemble the torque converter and 19 steps to reassemble it. Tools required include an adapter plate, engine stand, oil drain cart, and link brackets. Safety precautions are provided to contain fluids and protect from spring forces.
The document provides instructions for removing and disassembling a torque converter from a 730C2 articulated truck with a C13 engine. It lists the required tools and presents step-by-step instructions with accompanying illustrations. The instructions describe removing the torque converter housing, then disassembling internal components like the piston, plates, discs, bearings, and impeller. Reassembly instructions are also provided.
The document provides instructions for servicing components of the power train for a 730C2 articulated truck. It includes procedures for removing and installing the torque converter housing, relief valve, accessory drive, idler gear, and pump drive. The pump drive removal procedure involves detaching the torque converter housing and shield assembly, then removing bolts and the pump drive unit. The pump drive disassembly requires removing manifold bolts and parts, races, and the carrier assembly.
The document provides instructions for servicing components of the power train for a 730C2 articulated truck. It includes procedures for removing and installing the torque converter housing, relief valve, accessory drive, idler gear, and pump drive. The pump drive removal procedure involves detaching the torque converter housing and shield assembly, then removing bolts and the pump drive unit. The pump drive disassembly requires removing manifold bolts and parts, races, and the carrier assembly.
The document provides instructions for removing and installing various transmission components on a 730C2 articulated truck, including:
1. Removing and installing a torque converter housing, which requires attaching lifting tools and brackets due to the housing's 500 lb weight.
2. Removing and installing a relief valve on the torque converter inlet, which involves removing a manifold, relief valve, and O-ring seal.
3. Removing and installing an accessory drive on the transmission, which requires pressing out and installing bearing cups and removing/installing gears, seals, and shims.
4. Removing and installing an idler gear on the transmission accessory drive, which removes the gear from the housing.
5
The document provides instructions for removing and installing various components of the power train system for a 730C2 articulated truck, including:
1) Removing and installing the torque converter housing, requiring specialized tools and lifting equipment due to the component's weight.
2) Removing and installing the relief valve on the torque converter inlet, which involves removing retaining rings and seals.
3) Removing and installing the transmission accessory drive, a multi-step process that includes pressing out bearings and installing shims to set proper end play.
The document provides instructions for removing and installing various components of the transmission system for a 730C2 Articulated Truck powered by a C13 engine. The first section describes removing the torque converter housing and installing a new housing. The second section explains how to remove and install the relief valve for the torque converter inlet. The third section gives directions for removing and installing the accessory drive component of the transmission.
The document provides instructions for removing and installing various components of the power train system for a 730C2 articulated truck, including:
1) Removing and installing the torque converter housing, requiring specialized tools and lifting equipment due to the component's weight.
2) Removing and installing the relief valve on the torque converter inlet, which involves removing retaining rings and seals.
3) Removing and installing the transmission accessory drive, a multi-step process that includes pressing out bearings and installing shims to set proper end play.
This document provides instructions for removing and installing fuel lines, filters, pumps, and electronic unit injectors on a C32 industrial engine. Key steps include:
- Marking fuel lines before removal and checking for damage before reinstalling new lines, ensuring proper clearance from other components.
- Removing the fuel filter and water separator by disconnecting hoses and harness, and installing a new filter on the cleaned base assembly.
- Removing the fuel transfer pump by disconnecting hoses and bolts, and installing with a new O-ring and reconnecting hoses.
- Removing electronic unit injectors after disconnecting harnesses and bridges by prying them out, and installing by cleaning the cylinders
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator.
- Detailed steps are given for each component's removal and installation, including required tools. Safety precautions are provided, such as containing fluids and ensuring fuel system is shut off.
- Illustrations supplement the text instructions to show part locations and orientations. Torque specifications are listed for reinstallation.
The document provides instructions for removing and installing various powertrain components on a 745C articulated truck, including:
1) Removing and installing the torque converter, which requires using lifting tools and weighs approximately 95 kg.
2) Removing and installing the transmission scavenge pump, which involves disconnecting hoses and removing mounting bolts.
3) Removing and installing the transmission oil filter, which requires releasing system pressure and removing mounting bolts and harnesses.
This document provides instructions for removing and installing the front suspension frame on a 745 Articulated Truck. The removal procedure involves disconnecting hydraulic lines, removing mounting bolts, and using lifting equipment to remove the heavy frame component. The installation procedure is the reverse of removal, and includes priming bearings with grease, tightening bolts to the specified torque values, and reconnecting hydraulic lines. Safety precautions are provided regarding working under heavy components and relieving hydraulic pressure.
This document provides instructions for removing and installing various components of a Caterpillar C13 engine, including:
- Removing and installing the flywheel housing.
- Removing and installing the vibration damper and pulley.
- Removing and installing the crankshaft front seal.
- Removing and installing the front cover.
- Removing and installing the front gear group.
- Removing and installing the front housing.
- Removing and installing brackets and pulleys for the accessory drive.
- Removing and installing the fumes disposal filter.
- Removing and installing the valve mechanism cover.
Step-by-step instructions are provided for each procedure, including any required tools and tightening specifications.
This document provides instructions for removing and disassembling the engine and torque converter from a Caterpillar 730C Ejector Articulated Truck. It describes disconnecting wiring harnesses, hoses, brackets, and removing bolts to detach the engine. It then outlines steps to disassemble the torque converter including removing housing, bearings, plates, and seals. The instructions are accompanied by illustrations and require the use of various tools.
The document provides instructions for removing and installing a flywheel housing on a 422E Backhoe Loader. Key steps include:
1. Removing the flywheel, bolts, and lifting the housing off the cylinder block using a lifting device.
2. Inspecting the crankshaft rear seal for leaks and cleaning the housing before installation.
3. Installing the housing onto the cylinder block using guide studs, bolts, and checking alignment with a dial indicator.
The document provides instructions for removing and installing a hydraulic tank on a 420F backhoe loader. The removal procedure involves:
1. Disconnecting hoses from the hydraulic tank assembly
2. Disconnecting clamps on hoses connected to the tank
3. Removing bolts to detach the tank from the vehicle
4. Removing additional components like a strainer and gauge from the tank. The installation procedure is the reverse of the removal steps.
Caterpillar Cat 329D L Excavator (Prefix DTZ) Service Repair Manual (DTZ00001...itj79143591
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1. Draining the engine coolant below the level of the water temperature regulator.
2. Disconnecting the hose from the regulator cover by loosening the clamp.
3. Removing the bolts securing the regulator housing and removing the housing to access the internal components.
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1) Draining the engine coolant below the level of the regulator.
2) Disconnecting the hose from the regulator cover and removing mounting bolts.
3) Cleaning and installing a new O-ring, then reversing the removal steps to reinstall the regulator.
Caterpillar Cat 322C FM EXCAVATOR (Prefix CAM) Service Repair Manual (CAM0000...itj79143591
The document provides instructions for removing the engine oil filter base from a 322C FM excavator with a 3126 engine. The procedure involves first removing the turbocharger. Then, using a strap wrench, loosen the oil filter base by turning it counterclockwise. Finally, clean the oil filter base mounting surface before installing the new oil filter base. The summary is provided in 3 sentences or less as requested.
More Related Content
Similar to Caterpillar Cat 730C Ejector Articulated Truck (Prefix TFH) Service Repair Manual (TFH00001 and up).pdf
The document provides instructions for removing and disassembling a torque converter from a 730C2 articulated truck with a C13 engine. It lists the required tools and presents step-by-step instructions with accompanying illustrations. The instructions describe removing the torque converter housing, then disassembling internal components like the piston, plates, discs, bearings, and impeller. Reassembly instructions are also provided.
The document provides instructions for removing and disassembling a torque converter from a Caterpillar 730C2 articulated truck. It describes 18 steps to disassemble the torque converter and 19 steps to reassemble it. Tools required include an adapter plate, engine stand, oil drain cart, and link brackets. Safety precautions are provided to contain fluids and protect from spring forces.
The document provides instructions for removing and disassembling a torque converter from a 730C2 articulated truck with a C13 engine. It lists the required tools and presents step-by-step instructions with accompanying illustrations. The instructions describe removing the torque converter housing, then disassembling internal components like the piston, plates, discs, bearings, and impeller. Reassembly instructions are also provided.
The document provides instructions for servicing components of the power train for a 730C2 articulated truck. It includes procedures for removing and installing the torque converter housing, relief valve, accessory drive, idler gear, and pump drive. The pump drive removal procedure involves detaching the torque converter housing and shield assembly, then removing bolts and the pump drive unit. The pump drive disassembly requires removing manifold bolts and parts, races, and the carrier assembly.
The document provides instructions for servicing components of the power train for a 730C2 articulated truck. It includes procedures for removing and installing the torque converter housing, relief valve, accessory drive, idler gear, and pump drive. The pump drive removal procedure involves detaching the torque converter housing and shield assembly, then removing bolts and the pump drive unit. The pump drive disassembly requires removing manifold bolts and parts, races, and the carrier assembly.
The document provides instructions for removing and installing various transmission components on a 730C2 articulated truck, including:
1. Removing and installing a torque converter housing, which requires attaching lifting tools and brackets due to the housing's 500 lb weight.
2. Removing and installing a relief valve on the torque converter inlet, which involves removing a manifold, relief valve, and O-ring seal.
3. Removing and installing an accessory drive on the transmission, which requires pressing out and installing bearing cups and removing/installing gears, seals, and shims.
4. Removing and installing an idler gear on the transmission accessory drive, which removes the gear from the housing.
5
The document provides instructions for removing and installing various components of the power train system for a 730C2 articulated truck, including:
1) Removing and installing the torque converter housing, requiring specialized tools and lifting equipment due to the component's weight.
2) Removing and installing the relief valve on the torque converter inlet, which involves removing retaining rings and seals.
3) Removing and installing the transmission accessory drive, a multi-step process that includes pressing out bearings and installing shims to set proper end play.
The document provides instructions for removing and installing various components of the transmission system for a 730C2 Articulated Truck powered by a C13 engine. The first section describes removing the torque converter housing and installing a new housing. The second section explains how to remove and install the relief valve for the torque converter inlet. The third section gives directions for removing and installing the accessory drive component of the transmission.
The document provides instructions for removing and installing various components of the power train system for a 730C2 articulated truck, including:
1) Removing and installing the torque converter housing, requiring specialized tools and lifting equipment due to the component's weight.
2) Removing and installing the relief valve on the torque converter inlet, which involves removing retaining rings and seals.
3) Removing and installing the transmission accessory drive, a multi-step process that includes pressing out bearings and installing shims to set proper end play.
Similar to Caterpillar Cat 730C Ejector Articulated Truck (Prefix TFH) Service Repair Manual (TFH00001 and up).pdf (9)
This document provides instructions for removing and installing fuel lines, filters, pumps, and electronic unit injectors on a C32 industrial engine. Key steps include:
- Marking fuel lines before removal and checking for damage before reinstalling new lines, ensuring proper clearance from other components.
- Removing the fuel filter and water separator by disconnecting hoses and harness, and installing a new filter on the cleaned base assembly.
- Removing the fuel transfer pump by disconnecting hoses and bolts, and installing with a new O-ring and reconnecting hoses.
- Removing electronic unit injectors after disconnecting harnesses and bridges by prying them out, and installing by cleaning the cylinders
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator.
- Detailed steps are given for each component's removal and installation, including required tools. Safety precautions are provided, such as containing fluids and ensuring fuel system is shut off.
- Illustrations supplement the text instructions to show part locations and orientations. Torque specifications are listed for reinstallation.
The document provides instructions for removing and installing various powertrain components on a 745C articulated truck, including:
1) Removing and installing the torque converter, which requires using lifting tools and weighs approximately 95 kg.
2) Removing and installing the transmission scavenge pump, which involves disconnecting hoses and removing mounting bolts.
3) Removing and installing the transmission oil filter, which requires releasing system pressure and removing mounting bolts and harnesses.
This document provides instructions for removing and installing the front suspension frame on a 745 Articulated Truck. The removal procedure involves disconnecting hydraulic lines, removing mounting bolts, and using lifting equipment to remove the heavy frame component. The installation procedure is the reverse of removal, and includes priming bearings with grease, tightening bolts to the specified torque values, and reconnecting hydraulic lines. Safety precautions are provided regarding working under heavy components and relieving hydraulic pressure.
This document provides instructions for removing and installing various components of a Caterpillar C13 engine, including:
- Removing and installing the flywheel housing.
- Removing and installing the vibration damper and pulley.
- Removing and installing the crankshaft front seal.
- Removing and installing the front cover.
- Removing and installing the front gear group.
- Removing and installing the front housing.
- Removing and installing brackets and pulleys for the accessory drive.
- Removing and installing the fumes disposal filter.
- Removing and installing the valve mechanism cover.
Step-by-step instructions are provided for each procedure, including any required tools and tightening specifications.
This document provides instructions for removing and disassembling the engine and torque converter from a Caterpillar 730C Ejector Articulated Truck. It describes disconnecting wiring harnesses, hoses, brackets, and removing bolts to detach the engine. It then outlines steps to disassemble the torque converter including removing housing, bearings, plates, and seals. The instructions are accompanied by illustrations and require the use of various tools.
The document provides instructions for removing and installing a flywheel housing on a 422E Backhoe Loader. Key steps include:
1. Removing the flywheel, bolts, and lifting the housing off the cylinder block using a lifting device.
2. Inspecting the crankshaft rear seal for leaks and cleaning the housing before installation.
3. Installing the housing onto the cylinder block using guide studs, bolts, and checking alignment with a dial indicator.
The document provides instructions for removing and installing a hydraulic tank on a 420F backhoe loader. The removal procedure involves:
1. Disconnecting hoses from the hydraulic tank assembly
2. Disconnecting clamps on hoses connected to the tank
3. Removing bolts to detach the tank from the vehicle
4. Removing additional components like a strainer and gauge from the tank. The installation procedure is the reverse of the removal steps.
Caterpillar Cat 329D L Excavator (Prefix DTZ) Service Repair Manual (DTZ00001...itj79143591
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1. Draining the engine coolant below the level of the water temperature regulator.
2. Disconnecting the hose from the regulator cover by loosening the clamp.
3. Removing the bolts securing the regulator housing and removing the housing to access the internal components.
This document provides instructions for removing and installing the water temperature regulator on a Caterpillar C7 engine. It describes:
1) Draining the engine coolant below the level of the regulator.
2) Disconnecting the hose from the regulator cover and removing mounting bolts.
3) Cleaning and installing a new O-ring, then reversing the removal steps to reinstall the regulator.
Caterpillar Cat 322C FM EXCAVATOR (Prefix CAM) Service Repair Manual (CAM0000...itj79143591
The document provides instructions for removing the engine oil filter base from a 322C FM excavator with a 3126 engine. The procedure involves first removing the turbocharger. Then, using a strap wrench, loosen the oil filter base by turning it counterclockwise. Finally, clean the oil filter base mounting surface before installing the new oil filter base. The summary is provided in 3 sentences or less as requested.
Caterpillar Cat 322C FM EXCAVATOR (Prefix C3R) Service Repair Manual (C3R0000...itj79143591
1. The document provides instructions for removing and installing the unit injector hydraulic pump and turbocharger on a Caterpillar 3126B engine.
2. The unit injector hydraulic pump removal instructions include disconnecting lines and harness, removing mounting bolts, and inspecting seals. Installation is the reverse.
3. Turbocharger removal requires removing bolts and nuts connecting it to the exhaust manifold and disconnecting lines. Disassembly separates housing components. Assembly reconnects parts and installation bolts the turbocharger back into place.
Caterpillar Cat 320D L Excavator (Prefix PHX) Service Repair Manual (PHX00001...itj79143591
The document provides instructions for removing and installing a flywheel on a Caterpillar 320D L excavator. It describes using various tools to remove components like the muffler, flywheel housing, and rear crankshaft seal. Detailed illustrations and cautions are provided for each step. The process involves drilling holes in the crankshaft rear seal before removing it, cleaning and applying compounds to mating surfaces, and checking dowel pins and gaskets before reassembly.
Caterpillar Cat 320D L Excavator (Prefix KLM) Service Repair Manual (KLM00001...itj79143591
This document provides instructions for removing and installing the crankshaft front seal of a Caterpillar C6.4 engine.
The removal procedure instructs to drill holes in the existing seal and use a slide hammer puller to remove it. For installation, a front seal installer tool is used to carefully push the new seal onto the crankshaft flange. Proper cleaning of parts and use of retaining compound is emphasized.
Caterpillar Cat 320D L Excavator (Prefix JFZ) Service Repair Manual (JFZ00001...itj79143591
The document provides instructions for removing and installing the flywheel and flywheel housing on a Caterpillar 320D excavator engine. It describes using various tools to remove components like the muffler, flywheel, flywheel bolts, and flywheel housing bolts. Detailed illustrations show each step, like installing a lifting bracket and bolts to remove the flywheel. Precautions are provided to keep parts clean and contain fluids.
The document provides instructions for removing and installing a flywheel on a Caterpillar 320D L excavator. It describes using various tools to remove components like the muffler, flywheel housing, and rear crankshaft seal. Detailed illustrations and cautions are provided for each step. The process involves drilling holes in the crankshaft rear seal before removing it, cleaning and applying compounds to mating surfaces, and checking dowel pins and gaskets before reassembly.
This document provides instructions for removing and installing the crankshaft front seal of a Caterpillar C6.4 engine.
The removal procedure involves using a slide hammer puller to remove the existing seal after drilling holes in it. For installation, a front seal installer tool is used to carefully push the new seal onto the crankshaft flange. Proper cleaning and containment of fluids is emphasized.
The document provides instructions for removing and installing the flywheel and flywheel housing on a Caterpillar 320D excavator engine. It describes using various tools to remove components like the muffler, bolts, and flywheel. Detailed steps are outlined for removing the flywheel using link brackets and forcing bolts. Similar steps are then provided for installing the flywheel housing, flywheel, crankshaft rear seal, and crankshaft pulley.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
9. Illustration 15 g06039902
Note: Place identification marks on DEF pump coolant connectors (23) and DEF pump
connectors (24) for installation purposes. DEF pump coolant connectors (23) and DEF
pump connectors (24) are not interchangeable.
15. Remove DEF pump coolant connectors (23) and DEF pump connectors (24) from diesel
exhaust fluid pump (22).
Illustration 16 g06039906
16. Remove filter (25).
Installation Procedure
1. Install diesel exhaust fluid pump (22) in the reverse order of removal.
a. DEF pump connectors (24) to a torque of 4.5 ± 0.5 N·m (40± 4 lb in).
b. Tighten DEF pump coolant connectors (23) to a torque of 5.5 ± 0.5 N·m
(48 ± 4 lb in).
c. Tighten cover (20) to a torque of 20 ± 5 N·m (177 ± 44 lb in).
d. Tighten bolts (21) to a torque of 19 ± 2 N·m (168 ± 18 lb in).
e. Tighten bolts (16), (17) and (18) to a torque of 4 ± 0.7 N·m (35 ± 6 lb in).
6/7
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829507
Diesel Exhaust Fluid Injector - Remove and Install
SMCS - 108I-010; 108K-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 385-1861 Connector Plug 2
B - LOCTITE C-5A Copper Antiseize -
Illustration 1 g03687664
1. Disconnect hose assemblies (1) and cap with Tooling (A). Disconnect hose assembly (2).
1/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 2 g03687850
2. Disconnect harness assembly (4). Remove bolts (3) and remove diesel exhaust fluid injector
(5).
Illustration 3 g03687863
3. Remove gasket (6). Remove seal (7) from diesel exhaust fluid injector (5).
Installation Procedure
1. Install diesel exhaust fluid injector (5) in the reverse order of removal.
a. Replace gasket (6) and seal (7).
b. Apply Tooling (B) to the threads of bolts (3). Tighten bolts (3) to a torque of
5 ± 0.5 N·m (44 ± 4 lb in).
c. Retorque bolts (3) and turn an additional 90° ± 5°.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:13:29 UTC+0800 2019
2/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829892
Electronic Control (Diesel Exhaust Fluid) - Remove and
Install
SMCS - 108K-010-EK2
Removal Procedure
Illustration 1 g03687979
Note: Use locking tabs (1) to remove and install harness assemblies (2). Pull out locking
tabs (1) to remove harness assemblies (2). Push in locking tabs (1) to install harness
assemblies (2).
1. Disconnect harness assemblies (2) and remove bolts (4). Remove electronic control (3).
Installation Procedure
1. Install electronic control (3) in the reverse order of removal.
a. Tighten bolts (4) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
1/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829939
Solenoid Valve (DEF Heater Coolant) - Remove and Install
SMCS - 5479-CLT
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.
At operating temperature, engine coolant is hot and under pressure. The
radiator and all lines to heaters or the engine contain hot coolant or
steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only
when engine is stopped and cooling system pressure cap is cool enough
to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the
hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with
skin and eyes.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03688007
1. Disconnect harness assembly (1). Disconnect tubes (2).
Illustration 2 g03685247
2. Remove bolts (4) and remove solenoid valve (3).
Installation Procedure
1. Install solenoid valve (3) in the reverse order of removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:15:20 UTC+0800 2019
2/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829980
Solenoid Valve (ARD Fuel) - Remove and Install
SMCS - 5479-010
Removal Procedure (Pilot)
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
1/3
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g03688030
Illustration 2 g02798233
1. Use the following steps to remove solenoid valve assembly (1).
2. Remove nut (6) and washer (5).
3. Remove solenoid (4)
4. Remove cartridge assembly (3) and O-ring seals (2).
Installation Procedure
1. Install solenoid valve assembly (1) in the reverse order of removal.
a. Tighten cartridge assembly (3) to a torque of 50 ± 5 N·m (37 ± 4 lb ft).
b. Tighten nut (6) to a torque of 20 ± 2.5 N·m (177 ± 22 lb in).
Removal Procedure (Main)
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
2/3
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Illustration 3 g03688075
Illustration 4 g02798233
1. Use the following steps to remove solenoid valve assembly (1).
2. Remove nut (6) and washer (5).
3. Remove solenoid (4)
4. Remove cartridge assembly (3) and O-ring seals (2).
Installation Procedure
1. Install solenoid valve assembly (1) in the reverse order of removal.
a. Tighten cartridge assembly (3) to a torque of 50 ± 5 N·m (37 ± 4 lb ft).
b. Tighten nut (6) to a torque of 20 ± 2.5 N·m (177 ± 22 lb in).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:16:16 UTC+0800 2019
3/3
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05831007
Pressure Sensor (ARD Main Fuel) - Remove and Install
SMCS - 1439-010
Removal Procedure
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
1/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 1 g03688694
1. Disconnect harness assembly (2). Remove pressure sensor (1).
Installation Procedure
1. Install pressure sensor (1) in the reverse order of removal.
a. Tighten pressure sensor (1) to a torque of 30 ± 3 N·m (22 ± 2 lb ft).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:17:12 UTC+0800 2019
2/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05831302
Pressure Sensor (ARD Pilot Fuel) - Remove and Install
SMCS - 1439-010
Removal Procedure
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
1/2
730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...