The document provides instructions for removing and installing various components of a 730C Ejector Articulated Truck, including the diesel exhaust fluid tank, pump, injector, electronic control unit, and solenoid valves. The procedures include disconnecting hoses and electrical connections, removing mounting hardware, and installing components in the reverse order while applying specified torques to fasteners. Safety notices are also provided regarding hot coolant, fuel leaks, and contained fluid disposal.
Massey Ferguson MF 35 TRACTOR - (MADE IN INDIA FOR KENYA, SOUTH AFRICA & MORO...ufjsjekjkeme
This is the Highly Detailed factory Parts manual for theMASSEY FERGUSON MF 35 TRACTOR, this Parts Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MASSEY FERGUSON MF 35 TRACTOR Parts Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this Parts manual is an inexpensive way to keep your vehicle working properly.
Parts Manual Covers:
Engine and Equipment
Clutch
Transmission
Rear Axle
Linkage
PTO-Drive Mechanism
Front Axle
Hydraulics
Electric Equipment and Instrument
Electronic Equipment
Sheet Metal
And more...
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMASSEY FERGUSON MF 35 TRACTOR Parts Manual.
Thanks for visiting!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
9. Illustration 15 g06039902
Note: Place identification marks on DEF pump coolant connectors (23) and DEF pump
connectors (24) for installation purposes. DEF pump coolant connectors (23) and DEF
pump connectors (24) are not interchangeable.
15. Remove DEF pump coolant connectors (23) and DEF pump connectors (24) from diesel
exhaust fluid pump (22).
Illustration 16 g06039906
16. Remove filter (25).
Installation Procedure
1. Install diesel exhaust fluid pump (22) in the reverse order of removal.
a. DEF pump connectors (24) to a torque of 4.5 ± 0.5 N·m (40± 4 lb in).
b. Tighten DEF pump coolant connectors (23) to a torque of 5.5 ± 0.5 N·m
(48 ± 4 lb in).
c. Tighten cover (20) to a torque of 20 ± 5 N·m (177 ± 44 lb in).
d. Tighten bolts (21) to a torque of 19 ± 2 N·m (168 ± 18 lb in).
e. Tighten bolts (16), (17) and (18) to a torque of 4 ± 0.7 N·m (35 ± 6 lb in).
6/7730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829507
Diesel Exhaust Fluid Injector - Remove and Install
SMCS - 108I-010; 108K-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 385-1861 Connector Plug 2
B - LOCTITE C-5A Copper Antiseize -
Illustration 1 g03687664
1. Disconnect hose assemblies (1) and cap with Tooling (A). Disconnect hose assembly (2).
1/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 2 g03687850
2. Disconnect harness assembly (4). Remove bolts (3) and remove diesel exhaust fluid injector
(5).
Illustration 3 g03687863
3. Remove gasket (6). Remove seal (7) from diesel exhaust fluid injector (5).
Installation Procedure
1. Install diesel exhaust fluid injector (5) in the reverse order of removal.
a. Replace gasket (6) and seal (7).
b. Apply Tooling (B) to the threads of bolts (3). Tighten bolts (3) to a torque of
5 ± 0.5 N·m (44 ± 4 lb in).
c. Retorque bolts (3) and turn an additional 90° ± 5°.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:13:29 UTC+0800 2019
2/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829892
Electronic Control (Diesel Exhaust Fluid) - Remove and
Install
SMCS - 108K-010-EK2
Removal Procedure
Illustration 1 g03687979
Note: Use locking tabs (1) to remove and install harness assemblies (2). Pull out locking
tabs (1) to remove harness assemblies (2). Push in locking tabs (1) to install harness
assemblies (2).
1. Disconnect harness assemblies (2) and remove bolts (4). Remove electronic control (3).
Installation Procedure
1. Install electronic control (3) in the reverse order of removal.
a. Tighten bolts (4) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
1/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829939
Solenoid Valve (DEF Heater Coolant) - Remove and Install
SMCS - 5479-CLT
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.
At operating temperature, engine coolant is hot and under pressure. The
radiator and all lines to heaters or the engine contain hot coolant or
steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only
when engine is stopped and cooling system pressure cap is cool enough
to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the
hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with
skin and eyes.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03688007
1. Disconnect harness assembly (1). Disconnect tubes (2).
Illustration 2 g03685247
2. Remove bolts (4) and remove solenoid valve (3).
Installation Procedure
1. Install solenoid valve (3) in the reverse order of removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:15:20 UTC+0800 2019
2/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05829980
Solenoid Valve (ARD Fuel) - Remove and Install
SMCS - 5479-010
Removal Procedure (Pilot)
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
1/3730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g03688030
Illustration 2 g02798233
1. Use the following steps to remove solenoid valve assembly (1).
2. Remove nut (6) and washer (5).
3. Remove solenoid (4)
4. Remove cartridge assembly (3) and O-ring seals (2).
Installation Procedure
1. Install solenoid valve assembly (1) in the reverse order of removal.
a. Tighten cartridge assembly (3) to a torque of 50 ± 5 N·m (37 ± 4 lb ft).
b. Tighten nut (6) to a torque of 20 ± 2.5 N·m (177 ± 22 lb in).
Removal Procedure (Main)
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
2/3730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Illustration 3 g03688075
Illustration 4 g02798233
1. Use the following steps to remove solenoid valve assembly (1).
2. Remove nut (6) and washer (5).
3. Remove solenoid (4)
4. Remove cartridge assembly (3) and O-ring seals (2).
Installation Procedure
1. Install solenoid valve assembly (1) in the reverse order of removal.
a. Tighten cartridge assembly (3) to a torque of 50 ± 5 N·m (37 ± 4 lb ft).
b. Tighten nut (6) to a torque of 20 ± 2.5 N·m (177 ± 22 lb in).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:16:16 UTC+0800 2019
3/3730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05831007
Pressure Sensor (ARD Main Fuel) - Remove and Install
SMCS - 1439-010
Removal Procedure
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
1/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 1 g03688694
1. Disconnect harness assembly (2). Remove pressure sensor (1).
Installation Procedure
1. Install pressure sensor (1) in the reverse order of removal.
a. Tighten pressure sensor (1) to a torque of 30 ± 3 N·m (22 ± 2 lb ft).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Dec 26 00:17:12 UTC+0800 2019
2/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EJECTOR TRUCK
Model: 730C EJECTOR TRUCK TFH
Configuration: 730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
730C and 730C EJECTOR Articulated Trucks
Media Number -UENR2343-01 Publication Date -01/10/2014 Date Updated -29/03/2016
i05831302
Pressure Sensor (ARD Pilot Fuel) - Remove and Install
SMCS - 1439-010
Removal Procedure
Personal injury or death may result from failure to adhere to the
following procedures.
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire.
Clean up all leaked or spilled fuel. Do not smoke while working on the
fuel system.
Turn the disconnect switch OFF or disconnect the battery when
changing fuel filters.
1/2730C Ejector Articulated Truck TFH00001-UP (MACHINE) POWERED BY C13 En...
2019/12/26https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
