SlideShare a Scribd company logo
Service Repair Manual
Models
336D L Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02451126
Final Drive and Travel Motor - Remove
SMCS - 4050-011; 4351-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 138-7573 Link Bracket 1
Note: Put identification marks on all hose assemblies, fittings and ports so that all the components
can be reassembled in the original configuration. Plug all of the hose assemblies and cap all of the
fittings. This helps to prevent fluid loss and this helps to keep contaminants from entering the
system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/6
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g01223707
2/6
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Remove bolts (1) and cover (2).
2. Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
Illustration 2 g00944947
3. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 3 g01223711
4. Disconnect hose assemblies (3) and remove fitting (4).
3/6
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 4 g01181911
5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The
weight of final drive and travel motor (5) is approximately 860 kg (1896 lb). Put a slight
lifting tension on the final drive and travel motor (5).
Illustration 5 g01181912
6. Remove bolts (6).
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
4/6
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 6 g01181913
7. Use two bolts (6) in order to remove final drive and travel motor (5).
8. Carefully remove final drive and travel motor (5).
9. Remove bolts (6) from the frame.
Illustration 7 g01181914
10. Remove bolts (7) and counterbalance valve (8).
Illustration 8 g01181917
11. Remove O-ring seals (9) and (10).
5/6
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 9 g01181921
12. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 73 kg (160 lb).
13. Remove bolts (12) that mount travel motor (11) to final drive (13). Remove travel motor
(11).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:44:09 UTC+0800 2020
6/6
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i07188136
Final Drive and Travel Motor - Install
SMCS - 4050-012; 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 439-3938 Link Bracket 1
D - Loctite C5A Copper Anti-Seize -
Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01181921
1. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 73 kg (160 lb).
2. Position travel motor (11). Install bolts (12) that mount travel motor (11) to final drive (13).
2/5
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g01181917
3. Install O-ring seals (10) and (9).
Illustration 3 g01181914
4. Install counterbalance valve (8) and bolts (7).
Illustration 4 g01181911
3/5
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 5 g01182266
5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The
weight of final drive and travel motor (5) is approximately 860 kg (1896 lb).
6. Carefully position final drive and travel motor (5). Apply Tooling (D) to the threads of bolts
(6).
7. Tighten bolts (6) in an alternating sequence to a torque of 250 ± 25 N·m (184 ± 18 lb ft).
Turn an additional angle of 45 ± 5 degrees. Refer to Service Magazine , M0083843 , "An
Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on all Excavators"
for more detailed information.
Illustration 6 g01223711
8. Install fitting (4). Connect hose assemblies (3).
4/5
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 7 g00944947
9. Remove Tooling (A). Install the cap onto the hydraulic tank.
10. Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System
Oil Level - Check". Refer to Operation and Maintenance Manual, "Lubricant Viscosities
and Refill Capacities".
Illustration 8 g01223707
11. Install cover (2) and bolts (1). Tighten bolts (1) to a torque of 130 ± 10 N·m (96 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:45:05 UTC+0800 2020
5/5
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434256
Swivel - Remove
SMCS - 5060-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g01209599
1. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 2 g01216069
2. Disconnect hose assemblies (1), (2), and (3). Remove support (4).
Illustration 3 g01216082
2/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Remove bolts (6) and retainer (8). Remove clamp (7) and boot
(5).
Illustration 4 g01216099
4. Remove bolts (10) and covers (11).
Illustration 5 g01216098
5. Disconnect hose assemblies (15). Disconnect fitting (16). Disconnect hose assemblies (12).
Remove fittings (14). Remove bolts (13). Remove swivel (9).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:46:01 UTC+0800 2020
3/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02568407
Swivel - Disassemble
SMCS - 5060-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
6V-3822 Bolt 2
6V-5839 Washer 2
1P-5546 Crossblock 1
5P-4168 Step Plate 1
5F-7366 Screw 1
B 1P-2420 Transmission Repair Stand 1
Start By:
a. Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Thoroughly clean the outside of the swivel joint prior to disassembly.
Illustration 1 g00633843
Illustration 2 g00633841
2. Use a suitable lifting device to position the swivel joint onto Tooling (B). Fasten the swivel joint to
Tooling (B), as shown. The weight of the swivel joint is approximately 43 kg (95 lb).
3. Remove bolts (1), washers (2), and cover (3) from outside housing (8).
4. Remove O-ring seal (7) from outside housing (8).
5. Remove bolts (4), washers (5), and retainer (6) from rotor (11).
2/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Use Tooling (A) in order to separate the outside housing (8) from rotor (11). The weight of outside
housing (8) is approximately 20 kg (45 lb). The weight of rotor (11) is approximately 21 kg (46 lb).
7. Remove seals (9) from outside housing (8).
8. Remove O-ring seals (10) from the outside housing (8).
9. Remove plug (13). Remove O-ring seal (12) from plug (13).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:46:58 UTC+0800 2020
3/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02426337
Swivel - Assemble
SMCS - 5060-016
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid.
Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts
which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for
replacement. Dirt and other contaminants can damage the precision component. Perform assembly
procedures on a clean work surface. Keep components covered and protected at all times.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components,
if necessary.
1/2
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g00633843
1. Install O-ring seal (12) on plug (13). Apply clean hydraulic oil on the seal. Install plug (13).
2. Install seals (9) and O-ring seals (10) into outside housing (8).
3. Carefully install outside housing (8) over rotor (11).
4. Install retainer (6), washers (5), and bolts (4). This holds the rotor (11) and the outside housing (8)
together.
5. Apply clean hydraulic oil on O-ring seal (7). Install the O-ring seal in the outside housing.
6. Install cover (3), washers (2), and bolts (1) that secure the cover.
7. Check the swivel joint for leaks. Plug the drain ports of the inside body. Apply shop air pressure in
the top of the swivel joint and check the swivel joint for leaks. The shop air pressure should be
between 0.2758 MPa (40 psi) and 0.4137 MPa (60 psi).
End By:
a. Install the swivel joint. Refer to Disassembly and Assembly, "Swivel - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:47:54 UTC+0800 2020
2/2
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434356
Swivel - Install
SMCS - 5060-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Illustration 1 g01216082
1. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Position swivel (9). Install boot (5) and clamp (7). Install
retainer (8) and bolts (6).
1/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g01216069
2. Connect hose assemblies (1), (2), and (3). Install support (4).
Illustration 3 g01216098
3. Install bolts (13). Install fittings (14). Install fitting (16). Connect hose assemblies (15).
Connect hose assemblies (14) and (12) to swivel (9).
Illustration 4 g01216099
4. Install covers (11) and bolts (10).
2/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 5 g01209599
5. Remove Tooling (A).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:48:50 UTC+0800 2020
3/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434311
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Remove
SMCS - 5479-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes
for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g00690963
1. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A).
Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the
hydraulic system.
2/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g01206719
2. Open door (1).
Illustration 3 g01216136
3. Disconnect harness assemblies (4).
4. Disconnect hose assemblies (2) and (3).
5. Remove bolts (5) and solenoid valve (6).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:49:47 UTC+0800 2020
3/3
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434312
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Install
SMCS - 5479-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01216136
1/2
336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

Similar to Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr00001 and up)

Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
dueikdkmem
 
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
cdfzxs
 
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
fjskekxcddmmme
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
fijsekkdmdm2w
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
zan2736ban
 
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
ikdkdmdm
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
fujkskemdmdm4r
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
ze3xiandiao
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...
km7seydwuhdw
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
fskekkdmdmdm3e
 
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
fujkskemdmdm4r
 
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
fijsekkdmdm2w
 
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
ze3xiandiao
 

Similar to Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr00001 and up) (13)

Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
 
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
 
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
 
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual (J2F00001...
 
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...
 
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
 
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
 
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...
 

More from fjjsekwsxkdmmem

Massey ferguson mf 690 tractor 1984 (fr) tractor parts catalogue manual
Massey ferguson mf 690 tractor   1984 (fr) tractor parts catalogue manualMassey ferguson mf 690 tractor   1984 (fr) tractor parts catalogue manual
Massey ferguson mf 690 tractor 1984 (fr) tractor parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 675 tractor, 1984 (fr) tractor parts catalogue manual
Massey ferguson mf 675 tractor,   1984 (fr) tractor parts catalogue manualMassey ferguson mf 675 tractor,   1984 (fr) tractor parts catalogue manual
Massey ferguson mf 675 tractor, 1984 (fr) tractor parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 565 combines parts catalogue manual
Massey ferguson mf 565 combines parts catalogue manualMassey ferguson mf 565 combines parts catalogue manual
Massey ferguson mf 565 combines parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 560 combines parts catalogue manual
Massey ferguson mf 560 combines parts catalogue manualMassey ferguson mf 560 combines parts catalogue manual
Massey ferguson mf 560 combines parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 535 combines ( 1115201) parts catalogue manual
Massey ferguson mf 535 combines (  1115201) parts catalogue manualMassey ferguson mf 535 combines (  1115201) parts catalogue manual
Massey ferguson mf 535 combines ( 1115201) parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 530 s combine parts catalogue manual
Massey ferguson mf 530 s combine parts catalogue manualMassey ferguson mf 530 s combine parts catalogue manual
Massey ferguson mf 530 s combine parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 530 combines ( 1115201) parts catalogue manual
Massey ferguson mf 530 combines (  1115201) parts catalogue manualMassey ferguson mf 530 combines (  1115201) parts catalogue manual
Massey ferguson mf 530 combines ( 1115201) parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 510 combine, (fr) parts catalogue manual
Massey ferguson mf 510 combine,   (fr) parts catalogue manualMassey ferguson mf 510 combine,   (fr) parts catalogue manual
Massey ferguson mf 510 combine, (fr) parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 382 n tractor (japan only) parts catalogue manual
Massey ferguson mf 382 n tractor (japan only) parts catalogue manualMassey ferguson mf 382 n tractor (japan only) parts catalogue manual
Massey ferguson mf 382 n tractor (japan only) parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 285 s tractors (tr) parts catalogue manual
Massey ferguson mf 285 s tractors (tr) parts catalogue manualMassey ferguson mf 285 s tractors (tr) parts catalogue manual
Massey ferguson mf 285 s tractors (tr) parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 265 s tractors (tr) parts catalogue manual
Massey ferguson mf 265 s tractors (tr) parts catalogue manualMassey ferguson mf 265 s tractors (tr) parts catalogue manual
Massey ferguson mf 265 s tractors (tr) parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 254 tractor, 22210640 parts catalogue manual
Massey ferguson mf 254 tractor,   22210640 parts catalogue manualMassey ferguson mf 254 tractor,   22210640 parts catalogue manual
Massey ferguson mf 254 tractor, 22210640 parts catalogue manual
fjjsekwsxkdmmem
 
Massey ferguson mf 245 tractor, (fr) parts catalogue manual
Massey ferguson mf 245 tractor,   (fr) parts catalogue manualMassey ferguson mf 245 tractor,   (fr) parts catalogue manual
Massey ferguson mf 245 tractor, (fr) parts catalogue manual
fjjsekwsxkdmmem
 
Komatsu 12 v140 1 series diesel engine service repair manual
Komatsu 12 v140 1 series diesel engine service repair manualKomatsu 12 v140 1 series diesel engine service repair manual
Komatsu 12 v140 1 series diesel engine service repair manual
fjjsekwsxkdmmem
 
Komatsu 8 v170 1 series engine service repair manual
Komatsu 8 v170 1 series engine service repair manualKomatsu 8 v170 1 series engine service repair manual
Komatsu 8 v170 1 series engine service repair manual
fjjsekwsxkdmmem
 
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manualKohler aegis 23 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manual
fjjsekwsxkdmmem
 
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manualKohler aegis 20 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manual
fjjsekwsxkdmmem
 
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manualKohler aegis 17 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manual
fjjsekwsxkdmmem
 
Jcb 1 cx operator manual
Jcb 1 cx operator manualJcb 1 cx operator manual
Jcb 1 cx operator manual
fjjsekwsxkdmmem
 
Hyundai hlf202530(c) 5 forklift truck service repair manual
Hyundai hlf202530(c) 5 forklift truck service repair manualHyundai hlf202530(c) 5 forklift truck service repair manual
Hyundai hlf202530(c) 5 forklift truck service repair manual
fjjsekwsxkdmmem
 

More from fjjsekwsxkdmmem (20)

Massey ferguson mf 690 tractor 1984 (fr) tractor parts catalogue manual
Massey ferguson mf 690 tractor   1984 (fr) tractor parts catalogue manualMassey ferguson mf 690 tractor   1984 (fr) tractor parts catalogue manual
Massey ferguson mf 690 tractor 1984 (fr) tractor parts catalogue manual
 
Massey ferguson mf 675 tractor, 1984 (fr) tractor parts catalogue manual
Massey ferguson mf 675 tractor,   1984 (fr) tractor parts catalogue manualMassey ferguson mf 675 tractor,   1984 (fr) tractor parts catalogue manual
Massey ferguson mf 675 tractor, 1984 (fr) tractor parts catalogue manual
 
Massey ferguson mf 565 combines parts catalogue manual
Massey ferguson mf 565 combines parts catalogue manualMassey ferguson mf 565 combines parts catalogue manual
Massey ferguson mf 565 combines parts catalogue manual
 
Massey ferguson mf 560 combines parts catalogue manual
Massey ferguson mf 560 combines parts catalogue manualMassey ferguson mf 560 combines parts catalogue manual
Massey ferguson mf 560 combines parts catalogue manual
 
Massey ferguson mf 535 combines ( 1115201) parts catalogue manual
Massey ferguson mf 535 combines (  1115201) parts catalogue manualMassey ferguson mf 535 combines (  1115201) parts catalogue manual
Massey ferguson mf 535 combines ( 1115201) parts catalogue manual
 
Massey ferguson mf 530 s combine parts catalogue manual
Massey ferguson mf 530 s combine parts catalogue manualMassey ferguson mf 530 s combine parts catalogue manual
Massey ferguson mf 530 s combine parts catalogue manual
 
Massey ferguson mf 530 combines ( 1115201) parts catalogue manual
Massey ferguson mf 530 combines (  1115201) parts catalogue manualMassey ferguson mf 530 combines (  1115201) parts catalogue manual
Massey ferguson mf 530 combines ( 1115201) parts catalogue manual
 
Massey ferguson mf 510 combine, (fr) parts catalogue manual
Massey ferguson mf 510 combine,   (fr) parts catalogue manualMassey ferguson mf 510 combine,   (fr) parts catalogue manual
Massey ferguson mf 510 combine, (fr) parts catalogue manual
 
Massey ferguson mf 382 n tractor (japan only) parts catalogue manual
Massey ferguson mf 382 n tractor (japan only) parts catalogue manualMassey ferguson mf 382 n tractor (japan only) parts catalogue manual
Massey ferguson mf 382 n tractor (japan only) parts catalogue manual
 
Massey ferguson mf 285 s tractors (tr) parts catalogue manual
Massey ferguson mf 285 s tractors (tr) parts catalogue manualMassey ferguson mf 285 s tractors (tr) parts catalogue manual
Massey ferguson mf 285 s tractors (tr) parts catalogue manual
 
Massey ferguson mf 265 s tractors (tr) parts catalogue manual
Massey ferguson mf 265 s tractors (tr) parts catalogue manualMassey ferguson mf 265 s tractors (tr) parts catalogue manual
Massey ferguson mf 265 s tractors (tr) parts catalogue manual
 
Massey ferguson mf 254 tractor, 22210640 parts catalogue manual
Massey ferguson mf 254 tractor,   22210640 parts catalogue manualMassey ferguson mf 254 tractor,   22210640 parts catalogue manual
Massey ferguson mf 254 tractor, 22210640 parts catalogue manual
 
Massey ferguson mf 245 tractor, (fr) parts catalogue manual
Massey ferguson mf 245 tractor,   (fr) parts catalogue manualMassey ferguson mf 245 tractor,   (fr) parts catalogue manual
Massey ferguson mf 245 tractor, (fr) parts catalogue manual
 
Komatsu 12 v140 1 series diesel engine service repair manual
Komatsu 12 v140 1 series diesel engine service repair manualKomatsu 12 v140 1 series diesel engine service repair manual
Komatsu 12 v140 1 series diesel engine service repair manual
 
Komatsu 8 v170 1 series engine service repair manual
Komatsu 8 v170 1 series engine service repair manualKomatsu 8 v170 1 series engine service repair manual
Komatsu 8 v170 1 series engine service repair manual
 
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manualKohler aegis 23 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manual
 
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manualKohler aegis 20 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manual
 
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manualKohler aegis 17 hp liquid cooled vertical crankshaft service repair manual
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manual
 
Jcb 1 cx operator manual
Jcb 1 cx operator manualJcb 1 cx operator manual
Jcb 1 cx operator manual
 
Hyundai hlf202530(c) 5 forklift truck service repair manual
Hyundai hlf202530(c) 5 forklift truck service repair manualHyundai hlf202530(c) 5 forklift truck service repair manual
Hyundai hlf202530(c) 5 forklift truck service repair manual
 

Recently uploaded

5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
Fifth Gear Automotive Cross Roads
 
What Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingWhat Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop Working
Lancer Service
 
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdffinal-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
Ashfaq Ahmad
 
AadiShakti Projects ( Asp Cranes ) Raipur
AadiShakti Projects ( Asp Cranes ) RaipurAadiShakti Projects ( Asp Cranes ) Raipur
AadiShakti Projects ( Asp Cranes ) Raipur
AadiShakti Projects
 
Here's Why Every Semi-Truck Should Have ELDs
Here's Why Every Semi-Truck Should Have ELDsHere's Why Every Semi-Truck Should Have ELDs
Here's Why Every Semi-Truck Should Have ELDs
jennifermiller8137
 
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
78tq3hi2
 
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
mymwpc
 
What Is Recruitment Processing Outsourcing (RPO) Services?
What Is Recruitment Processing Outsourcing (RPO) Services?What Is Recruitment Processing Outsourcing (RPO) Services?
What Is Recruitment Processing Outsourcing (RPO) Services?
Impeccable HR
 
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
Fifth Gear Automotive Argyle
 
Skoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda PerthSkoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda Perth
Perth City Skoda
 
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsWhat Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Sprinter Gurus
 
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
Import Motorworks
 
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
78tq3hi2
 
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptxHand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
wstatus456
 
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
eygkup
 
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
ahmedendrise81
 
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
mymwpc
 
TRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specificationsTRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specifications
vishnup11
 
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
afkxen
 
Globalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full resultsGlobalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full results
vaterland
 

Recently uploaded (20)

5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
 
What Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingWhat Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop Working
 
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdffinal-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
 
AadiShakti Projects ( Asp Cranes ) Raipur
AadiShakti Projects ( Asp Cranes ) RaipurAadiShakti Projects ( Asp Cranes ) Raipur
AadiShakti Projects ( Asp Cranes ) Raipur
 
Here's Why Every Semi-Truck Should Have ELDs
Here's Why Every Semi-Truck Should Have ELDsHere's Why Every Semi-Truck Should Have ELDs
Here's Why Every Semi-Truck Should Have ELDs
 
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
 
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
 
What Is Recruitment Processing Outsourcing (RPO) Services?
What Is Recruitment Processing Outsourcing (RPO) Services?What Is Recruitment Processing Outsourcing (RPO) Services?
What Is Recruitment Processing Outsourcing (RPO) Services?
 
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
 
Skoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda PerthSkoda Octavia Rs for Sale Perth | Skoda Perth
Skoda Octavia Rs for Sale Perth | Skoda Perth
 
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsWhat Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
 
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...
 
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
 
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptxHand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
 
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
 
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【​网址​🎉ac123.net🎉​】
 
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
 
TRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specificationsTRANSFORMER OIL classifications and specifications
TRANSFORMER OIL classifications and specifications
 
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
 
Globalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full resultsGlobalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full results
 

Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr00001 and up)

  • 2. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i02451126 Final Drive and Travel Motor - Remove SMCS - 4050-011; 4351-011 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 5P-0306 Vacuum Transducer 1 FT-1115 Vacuum Cap 1 6V-4142 Fitting 1 5K-5068 Fitting 1 B 1U-9200 Lever Puller Hoist 1 C 138-7573 Link Bracket 1 Note: Put identification marks on all hose assemblies, fittings and ports so that all the components can be reassembled in the original configuration. Plug all of the hose assemblies and cap all of the fittings. This helps to prevent fluid loss and this helps to keep contaminants from entering the system. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers 1/6 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Illustration 1 g01223707 2/6 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. 1. Remove bolts (1) and cover (2). 2. Separate the track. Refer to Disassembly and Assembly, "Track - Seperate". Illustration 2 g00944947 3. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system. Illustration 3 g01223711 4. Disconnect hose assemblies (3) and remove fitting (4). 3/6 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. Illustration 4 g01181911 5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The weight of final drive and travel motor (5) is approximately 860 kg (1896 lb). Put a slight lifting tension on the final drive and travel motor (5). Illustration 5 g01181912 6. Remove bolts (6). Note: Mark the orientation of the final drive and travel motor assembly for installation purposes. 4/6 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. Illustration 6 g01181913 7. Use two bolts (6) in order to remove final drive and travel motor (5). 8. Carefully remove final drive and travel motor (5). 9. Remove bolts (6) from the frame. Illustration 7 g01181914 10. Remove bolts (7) and counterbalance valve (8). Illustration 8 g01181917 11. Remove O-ring seals (9) and (10). 5/6 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. Illustration 9 g01181921 12. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel motor (11) is approximately 73 kg (160 lb). 13. Remove bolts (12) that mount travel motor (11) to final drive (13). Remove travel motor (11). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun May 10 19:44:09 UTC+0800 2020 6/6 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i07188136 Final Drive and Travel Motor - Install SMCS - 4050-012; 4351-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 5P-0306 Vacuum Transducer 1 FT-1115 Vacuum Cap 1 6V-4142 Fitting 1 5K-5068 Fitting 1 B 1U-9200 Lever Puller Hoist 1 C 439-3938 Link Bracket 1 D - Loctite C5A Copper Anti-Seize - Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1/5 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. Illustration 1 g01181921 1. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel motor (11) is approximately 73 kg (160 lb). 2. Position travel motor (11). Install bolts (12) that mount travel motor (11) to final drive (13). 2/5 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. Illustration 2 g01181917 3. Install O-ring seals (10) and (9). Illustration 3 g01181914 4. Install counterbalance valve (8) and bolts (7). Illustration 4 g01181911 3/5 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. Illustration 5 g01182266 5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The weight of final drive and travel motor (5) is approximately 860 kg (1896 lb). 6. Carefully position final drive and travel motor (5). Apply Tooling (D) to the threads of bolts (6). 7. Tighten bolts (6) in an alternating sequence to a torque of 250 ± 25 N·m (184 ± 18 lb ft). Turn an additional angle of 45 ± 5 degrees. Refer to Service Magazine , M0083843 , "An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on all Excavators" for more detailed information. Illustration 6 g01223711 8. Install fitting (4). Connect hose assemblies (3). 4/5 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. Illustration 7 g00944947 9. Remove Tooling (A). Install the cap onto the hydraulic tank. 10. Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check". Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities". Illustration 8 g01223707 11. Install cover (2) and bolts (1). Tighten bolts (1) to a torque of 130 ± 10 N·m (96 ± 7 lb ft). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun May 10 19:45:05 UTC+0800 2020 5/5 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i02434256 Swivel - Remove SMCS - 5060-011 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A FT-2674 Vacuum Cap 1 B 138-7573 Link Bracket 2 Start By: a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. 1/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. Illustration 1 g01209599 1. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system. Illustration 2 g01216069 2. Disconnect hose assemblies (1), (2), and (3). Remove support (4). Illustration 3 g01216082 2/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. 3. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is approximately 45 kg (95 lb). Remove bolts (6) and retainer (8). Remove clamp (7) and boot (5). Illustration 4 g01216099 4. Remove bolts (10) and covers (11). Illustration 5 g01216098 5. Disconnect hose assemblies (15). Disconnect fitting (16). Disconnect hose assemblies (12). Remove fittings (14). Remove bolts (13). Remove swivel (9). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun May 10 19:46:01 UTC+0800 2020 3/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i02568407 Swivel - Disassemble SMCS - 5060-015 Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 6V-3822 Bolt 2 6V-5839 Washer 2 1P-5546 Crossblock 1 5P-4168 Step Plate 1 5F-7366 Screw 1 B 1P-2420 Transmission Repair Stand 1 Start By: a. Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove". NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. 1/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. 1. Thoroughly clean the outside of the swivel joint prior to disassembly. Illustration 1 g00633843 Illustration 2 g00633841 2. Use a suitable lifting device to position the swivel joint onto Tooling (B). Fasten the swivel joint to Tooling (B), as shown. The weight of the swivel joint is approximately 43 kg (95 lb). 3. Remove bolts (1), washers (2), and cover (3) from outside housing (8). 4. Remove O-ring seal (7) from outside housing (8). 5. Remove bolts (4), washers (5), and retainer (6) from rotor (11). 2/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. 6. Use Tooling (A) in order to separate the outside housing (8) from rotor (11). The weight of outside housing (8) is approximately 20 kg (45 lb). The weight of rotor (11) is approximately 21 kg (46 lb). 7. Remove seals (9) from outside housing (8). 8. Remove O-ring seals (10) from the outside housing (8). 9. Remove plug (13). Remove O-ring seal (12) from plug (13). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun May 10 19:46:58 UTC+0800 2020 3/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i02426337 Swivel - Assemble SMCS - 5060-016 Assembly Procedure Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times. Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary. 1/2 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. Illustration 1 g00633843 1. Install O-ring seal (12) on plug (13). Apply clean hydraulic oil on the seal. Install plug (13). 2. Install seals (9) and O-ring seals (10) into outside housing (8). 3. Carefully install outside housing (8) over rotor (11). 4. Install retainer (6), washers (5), and bolts (4). This holds the rotor (11) and the outside housing (8) together. 5. Apply clean hydraulic oil on O-ring seal (7). Install the O-ring seal in the outside housing. 6. Install cover (3), washers (2), and bolts (1) that secure the cover. 7. Check the swivel joint for leaks. Plug the drain ports of the inside body. Apply shop air pressure in the top of the swivel joint and check the swivel joint for leaks. The shop air pressure should be between 0.2758 MPa (40 psi) and 0.4137 MPa (60 psi). End By: a. Install the swivel joint. Refer to Disassembly and Assembly, "Swivel - Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun May 10 19:47:54 UTC+0800 2020 2/2 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 21. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i02434356 Swivel - Install SMCS - 5060-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A FT-2674 Vacuum Cap 1 B 138-7573 Link Bracket 2 Illustration 1 g01216082 1. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is approximately 45 kg (95 lb). Position swivel (9). Install boot (5) and clamp (7). Install retainer (8) and bolts (6). 1/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. Illustration 2 g01216069 2. Connect hose assemblies (1), (2), and (3). Install support (4). Illustration 3 g01216098 3. Install bolts (13). Install fittings (14). Install fitting (16). Connect hose assemblies (15). Connect hose assemblies (14) and (12) to swivel (9). Illustration 4 g01216099 4. Install covers (11) and bolts (10). 2/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 23. Illustration 5 g01209599 5. Remove Tooling (A). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun May 10 19:48:50 UTC+0800 2020 3/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 24. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i02434311 Solenoid Valve (Two-Way Flow and One Pump/Two Pump) - Remove SMCS - 5479-011 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A FT-2674 Vacuum Cap 1 Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. 1/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 25. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 26. Dispose of all fluids according to local regulations and mandates. Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Illustration 1 g00690963 1. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system. 2/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 27. Illustration 2 g01206719 2. Open door (1). Illustration 3 g01216136 3. Disconnect harness assemblies (4). 4. Disconnect hose assemblies (2) and (3). 5. Remove bolts (5) and solenoid valve (6). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Sun May 10 19:49:47 UTC+0800 2020 3/3 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 28. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 336D L EXCAVATOR JWR Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine Disassembly and Assembly 330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018 i02434312 Solenoid Valve (Two-Way Flow and One Pump/Two Pump) - Install SMCS - 5479-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A FT-2674 Vacuum Cap 1 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Illustration 1 g01216136 1/2 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562... 2020/5/10 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...