The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions to remove the component by disconnecting hoses, removing bolts, and lifting it out. The installation section provides the reverse steps and notes to check seals and apply anti-seize to bolts.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjskemdme
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions that include disconnecting hoses, removing bolts and covers, lifting out the final drive and travel motor assembly using lever pullers, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...fjskekdmjekm
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for installing new seals and reattaching all components in the reverse order of removal. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor from the final drive as well as installing the components in reverse order. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix wet) service repair manual (wet0000...fjjskekdm
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions to remove the component by draining fluids, disconnecting hoses, and removing bolts. Instructions are also provided to install the component by replacing seals, positioning the motor, and tightening bolts to the specified torque.
Caterpillar cat 336 d l excavator (prefix m4t) service repair manual (m4t0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses, remove bolts and brackets, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor and reinstalling both components along with new O-rings and fasteners. Safety notices advise keeping components clean and containing hydraulic fluids during disassembly.
Caterpillar cat 330 d l excavator (prefix lrm) service repair manual (lrm0000...hhjsekmdmm
The document provides instructions for removing and disassembling the final drive, travel motor, and swivel components of an excavator. It outlines 13 steps to remove the final drive and travel motor assembly using tools like a lever puller and vacuum pump. It then describes 11 steps to reinstall the components and refill fluids. Finally, it lists 5 steps to disassemble the swivel joint, including using bolts and washers to separate the housing from the rotor.
Caterpillar cat 330 d l hydraulic excavator (prefix ras) service repair manua...jfdskekdmme
This document provides instructions for removing and installing the final drive and travel motor on 330D L and 330D N Hydraulic Excavators. The removal procedure involves disconnecting hoses, removing bolts and brackets, and using lifting tools to detach the final drive and travel motor assembly. The installation procedure specifies cleaning and inspecting parts, attaching components in the reverse order of removal, and refilling fluids before testing operation. Required tools include vacuum pumps, lifting brackets, and thread sealant for reinstallation.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjjsekwsxkdmmem
The document provides instructions for removing and installing the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing bolts and brackets, and lifting the assembly out. The installation procedure reverses these steps, adding precautions like checking seals and applying anti-seize compound to bolts. Tools including levers, brackets and a vacuum transducer are required to complete the tasks.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjskemdme
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions that include disconnecting hoses, removing bolts and covers, lifting out the final drive and travel motor assembly using lever pullers, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...fjskekdmjekm
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for installing new seals and reattaching all components in the reverse order of removal. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor from the final drive as well as installing the components in reverse order. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix wet) service repair manual (wet0000...fjjskekdm
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions to remove the component by draining fluids, disconnecting hoses, and removing bolts. Instructions are also provided to install the component by replacing seals, positioning the motor, and tightening bolts to the specified torque.
Caterpillar cat 336 d l excavator (prefix m4t) service repair manual (m4t0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses, remove bolts and brackets, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor and reinstalling both components along with new O-rings and fasteners. Safety notices advise keeping components clean and containing hydraulic fluids during disassembly.
Caterpillar cat 330 d l excavator (prefix lrm) service repair manual (lrm0000...hhjsekmdmm
The document provides instructions for removing and disassembling the final drive, travel motor, and swivel components of an excavator. It outlines 13 steps to remove the final drive and travel motor assembly using tools like a lever puller and vacuum pump. It then describes 11 steps to reinstall the components and refill fluids. Finally, it lists 5 steps to disassemble the swivel joint, including using bolts and washers to separate the housing from the rotor.
Caterpillar cat 330 d l hydraulic excavator (prefix ras) service repair manua...jfdskekdmme
This document provides instructions for removing and installing the final drive and travel motor on 330D L and 330D N Hydraulic Excavators. The removal procedure involves disconnecting hoses, removing bolts and brackets, and using lifting tools to detach the final drive and travel motor assembly. The installation procedure specifies cleaning and inspecting parts, attaching components in the reverse order of removal, and refilling fluids before testing operation. Required tools include vacuum pumps, lifting brackets, and thread sealant for reinstallation.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjjsekwsxkdmmem
The document provides instructions for removing and installing the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing bolts and brackets, and lifting the assembly out. The installation procedure reverses these steps, adding precautions like checking seals and applying anti-seize compound to bolts. Tools including levers, brackets and a vacuum transducer are required to complete the tasks.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...zan2736ban
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids, releasing pressure from the hydraulic system, and preventing contamination.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...jdkskmmdmd1
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 336 d l excavator (prefix wet) service repair manual (wet0000...fjekkdmmem
The document provides instructions for removing the final drive and travel motor assembly from an excavator. It lists the required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts, and lifting the assembly out after applying tension with a lever puller hoist. Identification marks should be made for reinstallation. The process also involves removing travel motor components including O-rings and counterbalance valve.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...fhsjekdmme
The document provides instructions for removing and installing a final drive and travel motor on a 336D and 336D L excavator. It outlines 13 steps for removal, including disconnecting hoses, removing bolts and covers, and lifting out the final drive assembly. It also details 11 steps for installation, such as positioning seals and components, tightening bolts, and refilling fluids. Required tools are listed for both removal and installation procedures.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...cdsasw
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for installing new seals and reattaching all components in the reverse order of removal. Safety notices are included to warn of fluid containment and hydraulic pressure hazards.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...fhsjekdmme
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for inspecting and replacing seals before reinstalling the component using the reverse of the removal process.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...fjskekdmjekm
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for inspecting and replacing seals before reinstalling the component using the reverse of the removal process.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...cdsasw
The document provides instructions for removing and installing a final drive and travel motor on a 336D and 336D L excavator. It outlines 13 steps for removal, including disconnecting hoses, removing bolts and covers, and lifting out the final drive assembly. It also details 11 steps for installation, such as positioning seals and components, tightening bolts, and refilling fluids. Required tools are listed for both removal and installation procedures.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...dueikdkmem
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It describes 13 steps for removal, including draining fluids, disconnecting hoses, and removing mounting bolts. 11 steps are listed for installation, covering tasks like replacing seals, positioning components, and reconnecting hoses. Tools and safety precautions are also outlined.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...cdfzxs
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It describes 13 steps to remove the components, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. The 11 steps for installation include positioning the components, installing seals and bolts, and reconnecting hoses. Tools and safety precautions are also listed.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...fjskekxcddmmme
The document provides instructions to remove and install the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing mounting bolts, and lifting the assembly off with the aid of lifting tools. The installation procedure reverses these steps, taking care to reinstall seals and tighten bolts to the specified torques. Proper cleaning, containment of fluids, and use of lifting tools are emphasized for safety.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...zatao0179249295
The document provides instructions for removing the final drive and travel motor or an excavator. It lists the required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts, and using lever pullers and lifting devices to separate the final drive and travel motor assembly. Similarly, it provides instructions for installing the final drive and travel motor, including applying thread sealant, installing seals and fittings, and tightening bolts to the specified torque.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...kesi7153062
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and safety precautions. The removal process involves disconnecting hoses, removing bolts and brackets, and using lifting devices to remove the final drive and travel motor assembly. The installation process reverses these steps, ensuring proper orientation and torque of bolts. Proper handling of fluids and cleaning of parts is emphasized.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...cnp692569
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts, and using lifting devices to remove the final drive and travel motor assembly. Proper containment of fluids and cleaning of parts is emphasized.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...cdfxssw
The document provides instructions for removing and installing a final drive and travel motor on a Caterpillar 336D excavator. It details 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. It also details 11 steps for installation, including attaching seals, bolts, and hoses in the reverse order of removal. Special tools are listed and safety notices are provided regarding containing fluids and preventing contamination.
Caterpillar Cat 336D and 336D L Excavator (Prefix WRK) Service Repair Manual ...shibi1322
The document provides instructions for removing and installing a final drive and travel motor on a Caterpillar 336D excavator. It details 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. It also details 11 steps for installation, including attaching seals, bolts, and hoses in the reverse order of removal. Special tools are listed and safety notices are provided regarding containing fluids and preventing contamination.
Mc cormick c series c50 tractor service repair manualfjskkkdmem
This document contains parts lists and diagrams for engine, cooling system, hydraulic system, air intake, exhaust, and other components for McCormick C50 and C60 tractors. It includes over 100 individual part numbers with descriptions like "manifold", "hose", "bracket", "bolt", and provides the relevant diagrams to identify each part's location. The document also specifies that it covers replacement parts for C50 and C60 tractors from McCormick.
Massey ferguson mf 274 c crawler parts catalogue manualfjskkkdmem
This document provides part numbers and descriptions for components of a Massey Ferguson 274 C Crawler engine. It includes lists of parts for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, timing gear, and camshaft. The document contains detailed information on 65 individual parts that make up these engine systems.
More Related Content
Similar to Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr00001 and up)
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...zan2736ban
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids, releasing pressure from the hydraulic system, and preventing contamination.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...jdkskmmdmd1
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 336 d l excavator (prefix wet) service repair manual (wet0000...fjekkdmmem
The document provides instructions for removing the final drive and travel motor assembly from an excavator. It lists the required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts, and lifting the assembly out after applying tension with a lever puller hoist. Identification marks should be made for reinstallation. The process also involves removing travel motor components including O-rings and counterbalance valve.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...fhsjekdmme
The document provides instructions for removing and installing a final drive and travel motor on a 336D and 336D L excavator. It outlines 13 steps for removal, including disconnecting hoses, removing bolts and covers, and lifting out the final drive assembly. It also details 11 steps for installation, such as positioning seals and components, tightening bolts, and refilling fluids. Required tools are listed for both removal and installation procedures.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...cdsasw
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for installing new seals and reattaching all components in the reverse order of removal. Safety notices are included to warn of fluid containment and hydraulic pressure hazards.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...fhsjekdmme
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for inspecting and replacing seals before reinstalling the component using the reverse of the removal process.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...fjskekdmjekm
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for inspecting and replacing seals before reinstalling the component using the reverse of the removal process.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...cdsasw
The document provides instructions for removing and installing a final drive and travel motor on a 336D and 336D L excavator. It outlines 13 steps for removal, including disconnecting hoses, removing bolts and covers, and lifting out the final drive assembly. It also details 11 steps for installation, such as positioning seals and components, tightening bolts, and refilling fluids. Required tools are listed for both removal and installation procedures.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...dueikdkmem
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It describes 13 steps for removal, including draining fluids, disconnecting hoses, and removing mounting bolts. 11 steps are listed for installation, covering tasks like replacing seals, positioning components, and reconnecting hoses. Tools and safety precautions are also outlined.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...cdfzxs
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It describes 13 steps to remove the components, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. The 11 steps for installation include positioning the components, installing seals and bolts, and reconnecting hoses. Tools and safety precautions are also listed.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...fjskekxcddmmme
The document provides instructions to remove and install the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing mounting bolts, and lifting the assembly off with the aid of lifting tools. The installation procedure reverses these steps, taking care to reinstall seals and tighten bolts to the specified torques. Proper cleaning, containment of fluids, and use of lifting tools are emphasized for safety.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...zatao0179249295
The document provides instructions for removing the final drive and travel motor or an excavator. It lists the required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts, and using lever pullers and lifting devices to separate the final drive and travel motor assembly. Similarly, it provides instructions for installing the final drive and travel motor, including applying thread sealant, installing seals and fittings, and tightening bolts to the specified torque.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...kesi7153062
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and safety precautions. The removal process involves disconnecting hoses, removing bolts and brackets, and using lifting devices to remove the final drive and travel motor assembly. The installation process reverses these steps, ensuring proper orientation and torque of bolts. Proper handling of fluids and cleaning of parts is emphasized.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...cnp692569
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts, and using lifting devices to remove the final drive and travel motor assembly. Proper containment of fluids and cleaning of parts is emphasized.
Caterpillar cat 336 d l excavator (prefix wrk) service repair manual (wrk0000...cdfxssw
The document provides instructions for removing and installing a final drive and travel motor on a Caterpillar 336D excavator. It details 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. It also details 11 steps for installation, including attaching seals, bolts, and hoses in the reverse order of removal. Special tools are listed and safety notices are provided regarding containing fluids and preventing contamination.
Caterpillar Cat 336D and 336D L Excavator (Prefix WRK) Service Repair Manual ...shibi1322
The document provides instructions for removing and installing a final drive and travel motor on a Caterpillar 336D excavator. It details 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. It also details 11 steps for installation, including attaching seals, bolts, and hoses in the reverse order of removal. Special tools are listed and safety notices are provided regarding containing fluids and preventing contamination.
Similar to Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr00001 and up) (20)
Mc cormick c series c50 tractor service repair manualfjskkkdmem
This document contains parts lists and diagrams for engine, cooling system, hydraulic system, air intake, exhaust, and other components for McCormick C50 and C60 tractors. It includes over 100 individual part numbers with descriptions like "manifold", "hose", "bracket", "bolt", and provides the relevant diagrams to identify each part's location. The document also specifies that it covers replacement parts for C50 and C60 tractors from McCormick.
Massey ferguson mf 274 c crawler parts catalogue manualfjskkkdmem
This document provides part numbers and descriptions for components of a Massey Ferguson 274 C Crawler engine. It includes lists of parts for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, timing gear, and camshaft. The document contains detailed information on 65 individual parts that make up these engine systems.
Kubota b26 tractor loader backhoe parts catalogue manualfjskkkdmem
This parts book provides information on parts for an engine. It lists part numbers, names, quantities, serial number ranges, and other details across 19 pages covering major engine components like the crankcase, cylinder head, oil pan, camshaft, pistons, and crankshaft. The document also includes notes on country codes that may apply and definitions for column headings on the parts listing pages.
Komatsu wa180 l 3 wheel loader service repair manual sn54001 and upfjskkkdmem
The document provides instructions for removing and installing the starting motor, alternator, and fuel injection pump on an engine. It lists the specific steps to disconnect wiring, remove mounting bolts, and disconnect any fluid lines. Safety precautions are provided, such as parking the machine, lowering attachments, and disconnecting the battery before beginning work.
Cub cadet lt 1045 lawn tractor service repair manualfjskkkdmem
This service manual provides instructions for servicing 1000/1500 Series riding tractors manufactured by MTD Products Inc. It covers a range of models from 2001-2006 with various engines and drive systems. The manual outlines procedures for removing and replacing components like the hood, fenders, deck, drive belts, brakes, and transaxle. Safety notices advise that the manual is intended for trained technicians experienced with outdoor power equipment.
Claas dominator 78 (type 091) combine service repair manualfjskkkdmem
This document provides specifications for the CLAAS Dominator 106 combine harvester, including technical data, dimensions, weights, settings, capacities, and descriptions of components. Key details include the cutterbar widths ranging from 3.90 to 7.50 meters, overall transport width of 4365 to 8025 mm depending on cutterbar size, 6500 liter grain tank capacity, 151 kW six-cylinder engine, hydrostatic ground drive system with variable speeds up to 20 km/h, and straw walker system with six racks and two crankshafts for separation and cleaning.
Claas dominator 76 (type 084) combine service repair manualfjskkkdmem
This document provides specifications for the CLAAS Dominator 106 combine harvester, including technical data, dimensions, weights, settings, capacities, and descriptions of components. Key details include the cutterbar widths ranging from 3.90 to 7.50 meters, overall transport width of 4365 to 8025 mm depending on cutterbar size, 6500 liter grain tank capacity, 151 kW six-cylinder engine, hydrostatic three-gear range transmission, and hydraulic lift system with 180 bar pressure relief valve.
Allis chalmers models 7020 tractor service repair manualfjskkkdmem
This shop manual provides specifications and repair procedures for Allis-Chalmers tractor models 7010 through 7080. It includes an index of repairs by model and starting paragraph number. The condensed service data section lists specifications such as engine details, tune-up procedures, sizes, capacities and clearances for each model. Tightening torques are also provided.
Allis chalmers models 7010 tractor service repair manualfjskkkdmem
This shop manual provides specifications and repair procedures for Allis-Chalmers tractor models 7010 through 7080. It includes an index of repairs by model and starting paragraph. The condensed service data section lists specifications such as engine details, tune-up procedures, sizes, capacities and clearances for each model. Tightening torques are also provided.
New holland w170 d zbar tier2 wheel loader service repair manualfjskkkdmem
This service manual provides information on servicing the W130D and W170D wheel loaders. It contains sections covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, platform/cab, and safety information. The manual instructs technicians on authorized repairs and safety precautions when working on the equipment.
New holland tt75 tier3 engine, 4 wd tractor service repair manualfjskkkdmem
The document is a service manual for tractor models TT55, TT65, and TT75. It contains safety information and instructions for servicing various tractor systems, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, and electrical systems. The manual provides part numbers and diagrams to aid technicians in maintenance and repairs. Safety is emphasized throughout, warning technicians to follow procedures, wear protective equipment, and avoid hazards like operating machinery with the engine running.
New holland tk4040 m tractor service repair manualfjskkkdmem
This document is a service manual for tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. It contains introduction sections on safety rules, basic instructions, and consumables to be used during service. The bulk of the manual provides technical content on the engine, clutch, transmission, rear axle system, power take-off, brakes and controls, hydraulic systems, steering clutches, tracks and track suspension, electrical systems, and the platform, cab, and bodywork of the tractors.
New holland td95 tractor service repair manualfjskkkdmem
This document is the service manual for TD60-TD95 straddle mount model tractors. It contains sections on general information, the engine system, clutches, mechanical transmission (12x4), reverser (12x12), and other systems. Each section provides specifications, views, removal and installation instructions, and troubleshooting information for the components covered. The manual is intended to guide service technicians in repairing and maintaining these tractors.
New holland t7030 tractor service repair manualfjskkkdmem
This document is a service manual that contains contents, introduction, and safety rules sections. It provides information on various tractor systems including primary and secondary hydraulic power systems, pneumatic systems, electrical systems, engine systems, power train systems, travelling systems, and working arm systems. The introduction section emphasizes the importance of following safety precautions and only having authorized personnel conduct repairs. It outlines notices for parts identification and provides general safety rules for conducting maintenance and repairs.
New holland t4030 f tractor service repair manualfjskkkdmem
This service manual provides maintenance and repair information for CNH Industrial T4030F, T4040F, T4050F, and T4060F tractors. It includes specifications, safety procedures, maintenance instructions, and repair procedures for engine systems, transmission, axles, hydraulics, electrical systems, cab components, and more. The manual is intended to guide trained technicians in properly servicing and troubleshooting issues with these tractor models.
New holland t8.330 tractor service repair manualfjskkkdmem
This document is a service manual for CNH America LLC tractor models T8.275, T8.300, T8.330, T8.360, and T8.390 from May 2013. It contains introduction sections on safety rules, basic instructions, torque specifications, and capacities. The bulk of the document provides detailed sections on servicing and repairing the engine, transmission, axles, hydraulics, electrical systems, and other components of the tractors. Each major section includes subsections covering specific subsystems.
New holland t7.230 tractor service repair manualfjskkkdmem
This document is a service manual for CNH Industrial tractor models T7.230, T7.245, T7.260, and T7.270. It provides specifications and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is divided into sections covering specific systems such as the engine, clutch, transmission, front and rear axles, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. It also includes a table linking the tractor models to their engines.
New holland t7.220 power command tractor service repair manualfjskkkdmem
1. Drain fluids like coolant, oil, and transmission fluid.
2. Disconnect wiring harnesses and electrical connections.
3. Disconnect fuel, air, and exhaust lines.
4. Remove components attached to the engine like the cooling fan, air conditioning compressor, and power steering pump.
5. Remove mounting brackets and bolts to separate the engine from the chassis.
New holland t7.185 auto command tractor service repair manualfjskkkdmem
This service manual provides information on servicing various systems for a line of tractor models. The systems covered include hydraulic, pneumatic, electrical, electronic, engine, transmission, axles, brakes, steering, suspension, frame, cab, hitch and working tools. The manual contains specifications, functional descriptions, diagnostic procedures and service instructions.
New holland t7.175 auto command stage iv tractor service repair manualfjskkkdmem
This document is a service manual that provides information on servicing various components of tractor models T7.175 AutoCommandTM, T7.175, T7.190 AutoCommandTM, T7.190, T7.210 AutoCommandTM, T7.210, and T7.225 AutoCommandTM. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork and decals. Each section provides removal and installation instructions, specifications
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02451126
Final Drive and Travel Motor - Remove
SMCS - 4050-011; 4351-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 138-7573 Link Bracket 1
Note: Put identification marks on all hose assemblies, fittings and ports so that all the components
can be reassembled in the original configuration. Plug all of the hose assemblies and cap all of the
fittings. This helps to prevent fluid loss and this helps to keep contaminants from entering the
system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/6336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g01223707
2/6336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 1. Remove bolts (1) and cover (2).
2. Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
Illustration 2 g00944947
3. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 3 g01223711
4. Disconnect hose assemblies (3) and remove fitting (4).
3/6336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 4 g01181911
5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The
weight of final drive and travel motor (5) is approximately 860 kg (1896 lb). Put a slight
lifting tension on the final drive and travel motor (5).
Illustration 5 g01181912
6. Remove bolts (6).
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
4/6336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 6 g01181913
7. Use two bolts (6) in order to remove final drive and travel motor (5).
8. Carefully remove final drive and travel motor (5).
9. Remove bolts (6) from the frame.
Illustration 7 g01181914
10. Remove bolts (7) and counterbalance valve (8).
Illustration 8 g01181917
11. Remove O-ring seals (9) and (10).
5/6336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 9 g01181921
12. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 73 kg (160 lb).
13. Remove bolts (12) that mount travel motor (11) to final drive (13). Remove travel motor
(11).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:44:09 UTC+0800 2020
6/6336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i07188136
Final Drive and Travel Motor - Install
SMCS - 4050-012; 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 439-3938 Link Bracket 1
D - Loctite C5A Copper Anti-Seize -
Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01181921
1. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 73 kg (160 lb).
2. Position travel motor (11). Install bolts (12) that mount travel motor (11) to final drive (13).
2/5336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 2 g01181917
3. Install O-ring seals (10) and (9).
Illustration 3 g01181914
4. Install counterbalance valve (8) and bolts (7).
Illustration 4 g01181911
3/5336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 5 g01182266
5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The
weight of final drive and travel motor (5) is approximately 860 kg (1896 lb).
6. Carefully position final drive and travel motor (5). Apply Tooling (D) to the threads of bolts
(6).
7. Tighten bolts (6) in an alternating sequence to a torque of 250 ± 25 N·m (184 ± 18 lb ft).
Turn an additional angle of 45 ± 5 degrees. Refer to Service Magazine , M0083843 , "An
Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on all Excavators"
for more detailed information.
Illustration 6 g01223711
8. Install fitting (4). Connect hose assemblies (3).
4/5336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 7 g00944947
9. Remove Tooling (A). Install the cap onto the hydraulic tank.
10. Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System
Oil Level - Check". Refer to Operation and Maintenance Manual, "Lubricant Viscosities
and Refill Capacities".
Illustration 8 g01223707
11. Install cover (2) and bolts (1). Tighten bolts (1) to a torque of 130 ± 10 N·m (96 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:45:05 UTC+0800 2020
5/5336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434256
Swivel - Remove
SMCS - 5060-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 1 g01209599
1. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 2 g01216069
2. Disconnect hose assemblies (1), (2), and (3). Remove support (4).
Illustration 3 g01216082
2/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 3. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Remove bolts (6) and retainer (8). Remove clamp (7) and boot
(5).
Illustration 4 g01216099
4. Remove bolts (10) and covers (11).
Illustration 5 g01216098
5. Disconnect hose assemblies (15). Disconnect fitting (16). Disconnect hose assemblies (12).
Remove fittings (14). Remove bolts (13). Remove swivel (9).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:46:01 UTC+0800 2020
3/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02568407
Swivel - Disassemble
SMCS - 5060-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
6V-3822 Bolt 2
6V-5839 Washer 2
1P-5546 Crossblock 1
5P-4168 Step Plate 1
5F-7366 Screw 1
B 1P-2420 Transmission Repair Stand 1
Start By:
a. Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 1. Thoroughly clean the outside of the swivel joint prior to disassembly.
Illustration 1 g00633843
Illustration 2 g00633841
2. Use a suitable lifting device to position the swivel joint onto Tooling (B). Fasten the swivel joint to
Tooling (B), as shown. The weight of the swivel joint is approximately 43 kg (95 lb).
3. Remove bolts (1), washers (2), and cover (3) from outside housing (8).
4. Remove O-ring seal (7) from outside housing (8).
5. Remove bolts (4), washers (5), and retainer (6) from rotor (11).
2/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 6. Use Tooling (A) in order to separate the outside housing (8) from rotor (11). The weight of outside
housing (8) is approximately 20 kg (45 lb). The weight of rotor (11) is approximately 21 kg (46 lb).
7. Remove seals (9) from outside housing (8).
8. Remove O-ring seals (10) from the outside housing (8).
9. Remove plug (13). Remove O-ring seal (12) from plug (13).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:46:58 UTC+0800 2020
3/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02426337
Swivel - Assemble
SMCS - 5060-016
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid.
Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts
which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for
replacement. Dirt and other contaminants can damage the precision component. Perform assembly
procedures on a clean work surface. Keep components covered and protected at all times.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components,
if necessary.
1/2336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 1 g00633843
1. Install O-ring seal (12) on plug (13). Apply clean hydraulic oil on the seal. Install plug (13).
2. Install seals (9) and O-ring seals (10) into outside housing (8).
3. Carefully install outside housing (8) over rotor (11).
4. Install retainer (6), washers (5), and bolts (4). This holds the rotor (11) and the outside housing (8)
together.
5. Apply clean hydraulic oil on O-ring seal (7). Install the O-ring seal in the outside housing.
6. Install cover (3), washers (2), and bolts (1) that secure the cover.
7. Check the swivel joint for leaks. Plug the drain ports of the inside body. Apply shop air pressure in
the top of the swivel joint and check the swivel joint for leaks. The shop air pressure should be
between 0.2758 MPa (40 psi) and 0.4137 MPa (60 psi).
End By:
a. Install the swivel joint. Refer to Disassembly and Assembly, "Swivel - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:47:54 UTC+0800 2020
2/2336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434356
Swivel - Install
SMCS - 5060-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Illustration 1 g01216082
1. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Position swivel (9). Install boot (5) and clamp (7). Install
retainer (8) and bolts (6).
1/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 2 g01216069
2. Connect hose assemblies (1), (2), and (3). Install support (4).
Illustration 3 g01216098
3. Install bolts (13). Install fittings (14). Install fitting (16). Connect hose assemblies (15).
Connect hose assemblies (14) and (12) to swivel (9).
Illustration 4 g01216099
4. Install covers (11) and bolts (10).
2/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 5 g01209599
5. Remove Tooling (A).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:48:50 UTC+0800 2020
3/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434311
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Remove
SMCS - 5479-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes
for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g00690963
1. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A).
Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the
hydraulic system.
2/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 2 g01206719
2. Open door (1).
Illustration 3 g01216136
3. Disconnect harness assemblies (4).
4. Disconnect hose assemblies (2) and (3).
5. Remove bolts (5) and solenoid valve (6).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 10 19:49:47 UTC+0800 2020
3/3336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR JWR
Configuration: 336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434312
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Install
SMCS - 5479-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01216136
1/2336D L Excavator JWR00001-UP (MACHINE) POWERED BY C9 Engine(SEBP562...
2020/5/10https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...