The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes 13 steps to remove the component, which include disconnecting hoses, removing bolts and brackets, and lifting the final drive and travel motor assembly out. 11 steps are listed to install the component, covering tasks like positioning the travel motor and final drive, installing seals and bolts, and refilling fluids. Tools and safety precautions are also noted.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor from the final drive as well as installing the components in reverse order. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix wet) service repair manual (wet0000...fjjskekdm
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions to remove the component by draining fluids, disconnecting hoses, and removing bolts. Instructions are also provided to install the component by replacing seals, positioning the motor, and tightening bolts to the specified torque.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...fjskekdmjekm
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for installing new seals and reattaching all components in the reverse order of removal. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix m4t) service repair manual (m4t0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses, remove bolts and brackets, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor and reinstalling both components along with new O-rings and fasteners. Safety notices advise keeping components clean and containing hydraulic fluids during disassembly.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjskemdme
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions that include disconnecting hoses, removing bolts and covers, lifting out the final drive and travel motor assembly using lever pullers, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 330 d l hydraulic excavator (prefix ras) service repair manua...jfdskekdmme
This document provides instructions for removing and installing the final drive and travel motor on 330D L and 330D N Hydraulic Excavators. The removal procedure involves disconnecting hoses, removing bolts and brackets, and using lifting tools to detach the final drive and travel motor assembly. The installation procedure specifies cleaning and inspecting parts, attaching components in the reverse order of removal, and refilling fluids before testing operation. Required tools include vacuum pumps, lifting brackets, and thread sealant for reinstallation.
Caterpillar cat 330 d excavator (prefix gbc) service repair manual (gbc00001 ...hhjsekmdmm
This document provides instructions for removing and installing a camshaft on a Caterpillar C9 engine. It outlines the required tools and steps to take the camshaft out of the cylinder block, including removing other components like the rocker arm shaft and front cover first. It then describes how to install the camshaft, making sure to lubricate the lobes and journals and rotate the camshaft to prevent binding. Proper alignment of timing marks is also emphasized when installing the camshaft.
Caterpillar cat 330 d l excavator (prefix lrm) service repair manual (lrm0000...hhjsekmdmm
The document provides instructions for removing and disassembling the final drive, travel motor, and swivel components of an excavator. It outlines 13 steps to remove the final drive and travel motor assembly using tools like a lever puller and vacuum pump. It then describes 11 steps to reinstall the components and refill fluids. Finally, it lists 5 steps to disassemble the swivel joint, including using bolts and washers to separate the housing from the rotor.
Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor from the final drive as well as installing the components in reverse order. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix wet) service repair manual (wet0000...fjjskekdm
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions to remove the component by draining fluids, disconnecting hoses, and removing bolts. Instructions are also provided to install the component by replacing seals, positioning the motor, and tightening bolts to the specified torque.
Caterpillar cat 336 d excavator (prefix wrk) service repair manual (wrk00001 ...fjskekdmjekm
The document provides instructions for removing and installing a final drive and travel motor on a 336D or 336D L excavator. It describes using various tools to disconnect hoses and fittings, remove mounting bolts, and lift out the final drive assembly. Detailed steps are provided for installing new seals and reattaching all components in the reverse order of removal. Safety notices remind technicians to contain fluids and avoid contamination during the process.
Caterpillar cat 336 d l excavator (prefix m4t) service repair manual (m4t0000...fksjksmmde
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It describes using various tools to disconnect hoses, remove bolts and brackets, and lift out the final drive assembly. Detailed steps are provided for removing the travel motor and reinstalling both components along with new O-rings and fasteners. Safety notices advise keeping components clean and containing hydraulic fluids during disassembly.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjskemdme
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists the required tools and gives step-by-step instructions that include disconnecting hoses, removing bolts and covers, lifting out the final drive and travel motor assembly using lever pullers, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 330 d l hydraulic excavator (prefix ras) service repair manua...jfdskekdmme
This document provides instructions for removing and installing the final drive and travel motor on 330D L and 330D N Hydraulic Excavators. The removal procedure involves disconnecting hoses, removing bolts and brackets, and using lifting tools to detach the final drive and travel motor assembly. The installation procedure specifies cleaning and inspecting parts, attaching components in the reverse order of removal, and refilling fluids before testing operation. Required tools include vacuum pumps, lifting brackets, and thread sealant for reinstallation.
Caterpillar cat 330 d excavator (prefix gbc) service repair manual (gbc00001 ...hhjsekmdmm
This document provides instructions for removing and installing a camshaft on a Caterpillar C9 engine. It outlines the required tools and steps to take the camshaft out of the cylinder block, including removing other components like the rocker arm shaft and front cover first. It then describes how to install the camshaft, making sure to lubricate the lobes and journals and rotate the camshaft to prevent binding. Proper alignment of timing marks is also emphasized when installing the camshaft.
Caterpillar cat 330 d l excavator (prefix lrm) service repair manual (lrm0000...hhjsekmdmm
The document provides instructions for removing and disassembling the final drive, travel motor, and swivel components of an excavator. It outlines 13 steps to remove the final drive and travel motor assembly using tools like a lever puller and vacuum pump. It then describes 11 steps to reinstall the components and refill fluids. Finally, it lists 5 steps to disassemble the swivel joint, including using bolts and washers to separate the housing from the rotor.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...zan2736ban
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids, releasing pressure from the hydraulic system, and preventing contamination.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...jdkskmmdmd1
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjjsekwsxkdmmem
The document provides instructions for removing and installing the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing bolts and brackets, and lifting the assembly out. The installation procedure reverses these steps, adding precautions like checking seals and applying anti-seize compound to bolts. Tools including levers, brackets and a vacuum transducer are required to complete the tasks.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It outlines 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. For installation, 11 steps are described in reverse order, including positioning the assembly, installing seals and bolts, and reconnecting hoses. Required tools are listed for both procedures.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It details 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting the final drive and travel motor assembly out of the machine. 11 steps are provided for installation, covering tasks like positioning components, installing seals and bolts, and refilling fluids. Required tools and safety precautions are also listed.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual (WET00001...jdkskmmdmd1
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Hyundai r170 w 3 wheel excavator service repair manualikdkdmdm
1) The document provides instructions for removing and installing a pilot valve assembly from an excavator. Key steps include lowering the work equipment, releasing hydraulic pressure, disconnecting hoses, and removing the pilot valve assembly.
2) Detailed instructions are given for disassembling and assembling the pilot valve, including removing springs, seals, plates, and housing components. Cleaning procedures and torque specifications are also provided.
3) Reassembly instructions list installing components in reverse order, checking hydraulic fluid levels, and testing for leaks.
Hyundai r140 w 9 wheel excavator service repair manualikdkdmdm
This document provides instructions for removing and assembling front and rear axles. It describes:
1) Removing various components of the front axle like the mounting bolts, propeller shaft nut, and oscillating cylinder bolts.
2) Removing components of the rear axle like the mounting bolts, propeller shaft nut, and hoses.
3) General safety instructions for working on axles including using proper tools and PPE, cleaning procedures, and marking work areas.
4) Detailed steps for disassembling and assembling the planetary reduction and axle shaft, including removing the carrier cover, hub, gears, and bearings.
Hyundai r140 lc 7 crawler excavator service repair manualikdkdmdm
The document describes the structure of various components. It lists over 100 components, each identified by a short code. The components include things like caps, springs, sockets, and other mechanical parts. They are arranged into two sections that provide an inventory and organization of the various pieces that make up the system.
Hyundai r110 7 a crawler excavator service repair manualikdkdmdm
The document provides instructions for removing and installing a swing motor, disassembling and assembling a swing motor, removing and installing a reduction gear, and disassembling and assembling a reduction gear. The key steps are:
1. To remove the swing motor, disconnect hoses and pilot line hoses, remove mounting bolts, and lift out the motor.
2. To disassemble the swing motor, remove covers, shafts, seals, bearings, pistons, and other internal components.
3. To remove the reduction gear, remove the swing motor then sling and remove the reduction gear assembly mounting bolts.
4. To disassemble the reduction gear, remove gears,
Daewoo doosan solar 225 lc v excavator operator and maintenance manualikdkdmdm
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and warnings.
2. It warns that unsafe use of the excavator could lead to serious injury or death and instructs operators and maintenance personnel to thoroughly read the manual before use or maintenance.
3. The manual outlines the location of various safety labels on the excavator and provides descriptions of the hazards indicated by each label. It emphasizes the importance of keeping safety labels legible.
Daewoo doosan solar 210 w v wheel excavator operator and maintenance manualikdkdmdm
1. The document provides safety information and instructions for operating and maintaining a Daewoo excavator.
2. It identifies hazards through warning signs located on the machine and outlines precautions for starting, operating, and servicing the excavator.
3. Operators and maintenance personnel must read the manual thoroughly to understand safe practices and avoid accidents.
Daewoo doosan solar 170 w v wheel excavator operator and maintenance manualikdkdmdm
This document provides safety information and operating instructions for a Daewoo excavator. It includes sections on general safety, safety labels, lifting precautions, worksite precautions, operation, equipment, maintenance, transportation, specifications and troubleshooting. Operators must read and understand the manual before use to safely operate the excavator.
Daewoo doosan solar 170 lc v excavator operator and maintenance manualikdkdmdm
This document is an operation and maintenance manual for a Daewoo excavator. It contains sections on safety procedures, operational controls, maintenance requirements, transportation, troubleshooting, and specifications. Safety is the top priority, with warnings about potential injury or death from unsafe operation or maintenance. Regular inspection and maintenance are necessary to prevent issues and keep the excavator in good working order.
Daewoo doosan solar 160 w v wheel excavator operator and maintenance manualikdkdmdm
The document provides safety information and instructions for operating and maintaining a Daewoo excavator. It includes locations of safety labels on the machine, precautions for lifting loads, unauthorized modifications, hazards, starting and operating the machine, maintenance, batteries, towing, shipping and lift capacity tables. Operators must read the manual thoroughly before use to safely handle, operate and service the excavator.
The document provides instructions for removing and installing various engine components, including:
- Valve guides are removed from the cylinder head using a valve guide driver tool. New guides are installed using driver tools until the proper height is reached.
- Valve seat inserts are removed from the cylinder head using extractors. New inserts are installed using a driver tool after being cooled.
- The engine oil filter base, oil filter, and oil cooler are removed. Hoses are disconnected and bolts removed to access these components.
1. The document provides instructions for installing and disassembling the piston pump on a 336D2 excavator.
2. It describes 30 steps for assembling the piston pump, including installing bearings, seals, springs, and housing components in the proper order.
3. The disassembly instructions list 8 steps for removing the piston motor, such as removing bolts, seals, springs, and bearings. Tools are listed that are required for assembly and disassembly.
More Related Content
Similar to Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f00001 and up)
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...zan2736ban
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids, releasing pressure from the hydraulic system, and preventing contamination.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and covers, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix JWR) Service Repair Manual (JWR00001...jdkskmmdmd1
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar cat 336 d l excavator (prefix jwr) service repair manual (jwr0000...fjjsekwsxkdmmem
The document provides instructions for removing and installing the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing bolts and brackets, and lifting the assembly out. The installation procedure reverses these steps, adding precautions like checking seals and applying anti-seize compound to bolts. Tools including levers, brackets and a vacuum transducer are required to complete the tasks.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It outlines 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting out the final drive assembly. For installation, 11 steps are described in reverse order, including positioning the assembly, installing seals and bolts, and reconnecting hoses. Required tools are listed for both procedures.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It details 13 steps for removal, including disconnecting hoses, removing bolts and brackets, and lifting the final drive and travel motor assembly out of the machine. 11 steps are provided for installation, covering tasks like positioning components, installing seals and bolts, and refilling fluids. Required tools and safety precautions are also listed.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual (WET00001...jdkskmmdmd1
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It lists required tools and gives step-by-step instructions including disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Similar to Caterpillar cat 336 d l excavator (prefix j2f) service repair manual (j2f00001 and up) (11)
Hyundai r170 w 3 wheel excavator service repair manualikdkdmdm
1) The document provides instructions for removing and installing a pilot valve assembly from an excavator. Key steps include lowering the work equipment, releasing hydraulic pressure, disconnecting hoses, and removing the pilot valve assembly.
2) Detailed instructions are given for disassembling and assembling the pilot valve, including removing springs, seals, plates, and housing components. Cleaning procedures and torque specifications are also provided.
3) Reassembly instructions list installing components in reverse order, checking hydraulic fluid levels, and testing for leaks.
Hyundai r140 w 9 wheel excavator service repair manualikdkdmdm
This document provides instructions for removing and assembling front and rear axles. It describes:
1) Removing various components of the front axle like the mounting bolts, propeller shaft nut, and oscillating cylinder bolts.
2) Removing components of the rear axle like the mounting bolts, propeller shaft nut, and hoses.
3) General safety instructions for working on axles including using proper tools and PPE, cleaning procedures, and marking work areas.
4) Detailed steps for disassembling and assembling the planetary reduction and axle shaft, including removing the carrier cover, hub, gears, and bearings.
Hyundai r140 lc 7 crawler excavator service repair manualikdkdmdm
The document describes the structure of various components. It lists over 100 components, each identified by a short code. The components include things like caps, springs, sockets, and other mechanical parts. They are arranged into two sections that provide an inventory and organization of the various pieces that make up the system.
Hyundai r110 7 a crawler excavator service repair manualikdkdmdm
The document provides instructions for removing and installing a swing motor, disassembling and assembling a swing motor, removing and installing a reduction gear, and disassembling and assembling a reduction gear. The key steps are:
1. To remove the swing motor, disconnect hoses and pilot line hoses, remove mounting bolts, and lift out the motor.
2. To disassemble the swing motor, remove covers, shafts, seals, bearings, pistons, and other internal components.
3. To remove the reduction gear, remove the swing motor then sling and remove the reduction gear assembly mounting bolts.
4. To disassemble the reduction gear, remove gears,
Daewoo doosan solar 225 lc v excavator operator and maintenance manualikdkdmdm
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and warnings.
2. It warns that unsafe use of the excavator could lead to serious injury or death and instructs operators and maintenance personnel to thoroughly read the manual before use or maintenance.
3. The manual outlines the location of various safety labels on the excavator and provides descriptions of the hazards indicated by each label. It emphasizes the importance of keeping safety labels legible.
Daewoo doosan solar 210 w v wheel excavator operator and maintenance manualikdkdmdm
1. The document provides safety information and instructions for operating and maintaining a Daewoo excavator.
2. It identifies hazards through warning signs located on the machine and outlines precautions for starting, operating, and servicing the excavator.
3. Operators and maintenance personnel must read the manual thoroughly to understand safe practices and avoid accidents.
Daewoo doosan solar 170 w v wheel excavator operator and maintenance manualikdkdmdm
This document provides safety information and operating instructions for a Daewoo excavator. It includes sections on general safety, safety labels, lifting precautions, worksite precautions, operation, equipment, maintenance, transportation, specifications and troubleshooting. Operators must read and understand the manual before use to safely operate the excavator.
Daewoo doosan solar 170 lc v excavator operator and maintenance manualikdkdmdm
This document is an operation and maintenance manual for a Daewoo excavator. It contains sections on safety procedures, operational controls, maintenance requirements, transportation, troubleshooting, and specifications. Safety is the top priority, with warnings about potential injury or death from unsafe operation or maintenance. Regular inspection and maintenance are necessary to prevent issues and keep the excavator in good working order.
Daewoo doosan solar 160 w v wheel excavator operator and maintenance manualikdkdmdm
The document provides safety information and instructions for operating and maintaining a Daewoo excavator. It includes locations of safety labels on the machine, precautions for lifting loads, unauthorized modifications, hazards, starting and operating the machine, maintenance, batteries, towing, shipping and lift capacity tables. Operators must read the manual thoroughly before use to safely handle, operate and service the excavator.
The document provides instructions for removing and installing various engine components, including:
- Valve guides are removed from the cylinder head using a valve guide driver tool. New guides are installed using driver tools until the proper height is reached.
- Valve seat inserts are removed from the cylinder head using extractors. New inserts are installed using a driver tool after being cooled.
- The engine oil filter base, oil filter, and oil cooler are removed. Hoses are disconnected and bolts removed to access these components.
1. The document provides instructions for installing and disassembling the piston pump on a 336D2 excavator.
2. It describes 30 steps for assembling the piston pump, including installing bearings, seals, springs, and housing components in the proper order.
3. The disassembly instructions list 8 steps for removing the piston motor, such as removing bolts, seals, springs, and bearings. Tools are listed that are required for assembly and disassembly.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of an excavator model 336D2. The disassembly procedure involves removing 22 parts from the pump housing including springs, seals, pistons, and bearings. The assembly procedure lists 30 steps to reinstall the parts in reverse order and adjust clearances using various tools. Precautions are provided to prevent injury from spring forces.
This document provides installation instructions for installing a swivel on an excavator. It outlines 11 steps including positioning the swivel using lifting tools, installing O-rings and seals, connecting hose assemblies and fittings, and filling the hydraulic system. Proper cleanliness and leak testing are emphasized. Tools include a vacuum cap, link brackets, and anti-seize compound.
The document provides instructions for removing and installing a unit injector hydraulic pump on Caterpillar C9 engines. The removal procedure involves disconnecting tubes, hoses and harnesses from the pump before removing mounting bolts and the pump. For installation, the instructions specify applying a new O-ring seal and mounting the pump using the bolts, then reconnecting all tubes, hoses and harnesses. Special procedures are provided for pumps with dual tapered roller bearings.
This document provides instructions for disassembling and assembling the travel motor on 336D2 and 336D2 L excavators. The disassembly process involves using various tools to remove components like retaining rings, seals, pistons, springs, and bearings. The assembly process describes installing these components in reverse order and notes that cleanliness is important, components should be lubricated, and parts must be installed in their proper positions and orientations.
The document provides disassembly instructions for a travel motor on an excavator model 336D2 L. It outlines 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, plates, valves and more. Precautions are given to watch for spring forces and contain fluids. Tools required include bolts, pins, seals, and specialty tools like bearing pullers and drivers.
This document provides instructions for removing and installing a unit injector and unit injector sleeve on a Caterpillar C9 engine. It outlines the required tools and safety procedures. The key steps include cleaning parts, installing new seals, using tools to properly position the injector and sleeve, and refilling fluids after installation. Proper installation is important to prevent leaks and engine issues.
Caterpillar cat 336 d l excavator (prefix ptb) service repair manual (ptb0000...ikdkdmdm
This document provides assembly instructions for a 336D L excavator transmission in 3 sentences:
It lists the required tools and parts, gives step-by-step instructions for assembling the transmission components which include gears, carriers, shafts, seals, and housing, and notes that cleanliness is important during assembly and O-rings and seals should always be replaced.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...ikdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar cat 336 d l excavator (prefix m4t) service repair manual (m4t0000...ikdkdmdm
The document provides instructions for removing and installing a final drive and travel motor on a 336D L excavator. It lists required tools and steps to release hydraulic pressure, disconnect hoses, remove mounting bolts, and lift out the final drive assembly. Reinstallation involves cleaning and inspecting seals, positioning the assembly, reattaching hoses, and tightening bolts to the specified torque. Safety notices are provided regarding containing fluids and relieving hydraulic pressure before disassembly.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02451126
Final Drive and Travel Motor - Remove
SMCS - 4050-011; 4351-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 138-7573 Link Bracket 1
Note: Put identification marks on all hose assemblies, fittings and ports so that all the components
can be reassembled in the original configuration. Plug all of the hose assemblies and cap all of the
fittings. This helps to prevent fluid loss and this helps to keep contaminants from entering the
system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/6
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g01223707
2/6
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. 1. Remove bolts (1) and cover (2).
2. Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
Illustration 2 g00944947
3. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 3 g01223711
4. Disconnect hose assemblies (3) and remove fitting (4).
3/6
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 4 g01181911
5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The
weight of final drive and travel motor (5) is approximately 860 kg (1896 lb). Put a slight
lifting tension on the final drive and travel motor (5).
Illustration 5 g01181912
6. Remove bolts (6).
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
4/6
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 6 g01181913
7. Use two bolts (6) in order to remove final drive and travel motor (5).
8. Carefully remove final drive and travel motor (5).
9. Remove bolts (6) from the frame.
Illustration 7 g01181914
10. Remove bolts (7) and counterbalance valve (8).
Illustration 8 g01181917
11. Remove O-ring seals (9) and (10).
5/6
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 9 g01181921
12. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 73 kg (160 lb).
13. Remove bolts (12) that mount travel motor (11) to final drive (13). Remove travel motor
(11).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 7 22:30:51 UTC+0800 2020
6/6
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i07188136
Final Drive and Travel Motor - Install
SMCS - 4050-012; 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 439-3938 Link Bracket 1
D - Loctite C5A Copper Anti-Seize -
Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01181921
1. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 73 kg (160 lb).
2. Position travel motor (11). Install bolts (12) that mount travel motor (11) to final drive (13).
2/5
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 2 g01181917
3. Install O-ring seals (10) and (9).
Illustration 3 g01181914
4. Install counterbalance valve (8) and bolts (7).
Illustration 4 g01181911
3/5
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 5 g01182266
5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The
weight of final drive and travel motor (5) is approximately 860 kg (1896 lb).
6. Carefully position final drive and travel motor (5). Apply Tooling (D) to the threads of bolts
(6).
7. Tighten bolts (6) in an alternating sequence to a torque of 250 ± 25 N·m (184 ± 18 lb ft).
Turn an additional angle of 45 ± 5 degrees. Refer to Service Magazine , M0083843 , "An
Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on all Excavators"
for more detailed information.
Illustration 6 g01223711
8. Install fitting (4). Connect hose assemblies (3).
4/5
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 7 g00944947
9. Remove Tooling (A). Install the cap onto the hydraulic tank.
10. Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System
Oil Level - Check". Refer to Operation and Maintenance Manual, "Lubricant Viscosities
and Refill Capacities".
Illustration 8 g01223707
11. Install cover (2) and bolts (1). Tighten bolts (1) to a torque of 130 ± 10 N·m (96 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 7 22:31:48 UTC+0800 2020
5/5
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434256
Swivel - Remove
SMCS - 5060-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 1 g01209599
1. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 2 g01216069
2. Disconnect hose assemblies (1), (2), and (3). Remove support (4).
Illustration 3 g01216082
2/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 3. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Remove bolts (6) and retainer (8). Remove clamp (7) and boot
(5).
Illustration 4 g01216099
4. Remove bolts (10) and covers (11).
Illustration 5 g01216098
5. Disconnect hose assemblies (15). Disconnect fitting (16). Disconnect hose assemblies (12).
Remove fittings (14). Remove bolts (13). Remove swivel (9).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 7 22:32:44 UTC+0800 2020
3/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02568407
Swivel - Disassemble
SMCS - 5060-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
6V-3822 Bolt 2
6V-5839 Washer 2
1P-5546 Crossblock 1
5P-4168 Step Plate 1
5F-7366 Screw 1
B 1P-2420 Transmission Repair Stand 1
Start By:
a. Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. 1. Thoroughly clean the outside of the swivel joint prior to disassembly.
Illustration 1 g00633843
Illustration 2 g00633841
2. Use a suitable lifting device to position the swivel joint onto Tooling (B). Fasten the swivel joint to
Tooling (B), as shown. The weight of the swivel joint is approximately 43 kg (95 lb).
3. Remove bolts (1), washers (2), and cover (3) from outside housing (8).
4. Remove O-ring seal (7) from outside housing (8).
5. Remove bolts (4), washers (5), and retainer (6) from rotor (11).
2/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 6. Use Tooling (A) in order to separate the outside housing (8) from rotor (11). The weight of outside
housing (8) is approximately 20 kg (45 lb). The weight of rotor (11) is approximately 21 kg (46 lb).
7. Remove seals (9) from outside housing (8).
8. Remove O-ring seals (10) from the outside housing (8).
9. Remove plug (13). Remove O-ring seal (12) from plug (13).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 7 22:33:40 UTC+0800 2020
3/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02426337
Swivel - Assemble
SMCS - 5060-016
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid.
Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts
which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for
replacement. Dirt and other contaminants can damage the precision component. Perform assembly
procedures on a clean work surface. Keep components covered and protected at all times.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components,
if necessary.
1/2
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 1 g00633843
1. Install O-ring seal (12) on plug (13). Apply clean hydraulic oil on the seal. Install plug (13).
2. Install seals (9) and O-ring seals (10) into outside housing (8).
3. Carefully install outside housing (8) over rotor (11).
4. Install retainer (6), washers (5), and bolts (4). This holds the rotor (11) and the outside housing (8)
together.
5. Apply clean hydraulic oil on O-ring seal (7). Install the O-ring seal in the outside housing.
6. Install cover (3), washers (2), and bolts (1) that secure the cover.
7. Check the swivel joint for leaks. Plug the drain ports of the inside body. Apply shop air pressure in
the top of the swivel joint and check the swivel joint for leaks. The shop air pressure should be
between 0.2758 MPa (40 psi) and 0.4137 MPa (60 psi).
End By:
a. Install the swivel joint. Refer to Disassembly and Assembly, "Swivel - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 7 22:34:37 UTC+0800 2020
2/2
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434356
Swivel - Install
SMCS - 5060-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Illustration 1 g01216082
1. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Position swivel (9). Install boot (5) and clamp (7). Install
retainer (8) and bolts (6).
1/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 2 g01216069
2. Connect hose assemblies (1), (2), and (3). Install support (4).
Illustration 3 g01216098
3. Install bolts (13). Install fittings (14). Install fitting (16). Connect hose assemblies (15).
Connect hose assemblies (14) and (12) to swivel (9).
Illustration 4 g01216099
4. Install covers (11) and bolts (10).
2/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 5 g01209599
5. Remove Tooling (A).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 7 22:35:33 UTC+0800 2020
3/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434311
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Remove
SMCS - 5479-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes
for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g00690963
1. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A).
Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the
hydraulic system.
2/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Illustration 2 g01206719
2. Open door (1).
Illustration 3 g01216136
3. Disconnect harness assemblies (4).
4. Disconnect hose assemblies (2) and (3).
5. Remove bolts (5) and solenoid valve (6).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 7 22:36:30 UTC+0800 2020
3/3
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR J2F
Configuration: 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434312
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Install
SMCS - 5479-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01216136
1/2
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine(SEBP5375...
2020/5/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...