This document provides instructions for disassembling the final drive of a 329D2 L excavator. It begins by removing the final drive assembly and cleaning it. Then various parts like the cover, carrier assembly, ring gears, and housing are removed using specialized tools. Each step provides illustrations and notes cleaning requirements and part weights to aid with the disassembly process. The overall process is described in 33 steps and is intended to fully disassemble the final drive for repair or replacement of components.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...f7djidksmd3e
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, bearings, seals, and housing pieces.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...paws21610697
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, bearings, seals, and housing pieces.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...f8usiedkdmm
This document provides instructions for disassembling the final drive on a 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the machine.
2. Dismantling the final drive components including removing gears, shafts, seals and housings.
3. Using various tools to separate components by driving out pins, lifting parts, and applying force as needed.
4. Disassembling internal components such as planetary gears and carriers from housings and each other.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...uddksemd8ud
This document provides instructions for disassembling the final drive on a Caterpillar 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the track assembly and travel motor.
2. Lifting the final drive and disassembling it into components like the cover, carrier assembly, ring gears, and main housing.
3. Using tools like pins, bolts, and lifting devices to separate each part while taking care to mark orientations and support heavy components.
4. Disassembling internal components of the carrier assembly and housing such as planetary gears, shafts, seals, and bearings.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...jdjkskmikdkmd
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, shafts, seals, and housings.
This document provides instructions for disassembling the final drive on a Caterpillar 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the track assembly and travel motor.
2. Lifting the final drive and disassembling it into components like the cover, carrier assembly, ring gears, and main housing.
3. Using tools like pins, screws, and lifting devices to separate individual parts which are then cleaned and inspected.
4. Disassembling internal components of the carrier assembly like planetary gears and shafts.
The instructions describe each step in detail and include illustrations of the components and proper tooling to use. Safety notes are included about handling
This document provides instructions for disassembling the final drive on a 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the machine.
2. Dismantling the final drive components including removing gears, shafts, seals and housings.
3. Using various tools to separate components by driving out pins, lifting parts, and applying force as needed.
4. Disassembling internal components such as planetary gears and carriers from the main housing.
The instructions describe each step in detail and include illustrations of the components and proper tooling. Safety notes are included to handle parts carefully due to their weight.
This document provides instructions for disassembling the final drive on a Caterpillar 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the track assembly and travel motor.
2. Lifting the final drive and disassembling it into components like the cover, carrier assembly, ring gears, and main housing.
3. Using tools like pins, bolts, and lifting devices to separate individual parts from each other.
4. Cleaning components and keeping alignment marks to ensure proper reassembly. The document lists over 30 individual steps and provides illustrations for each step.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...f7djidksmd3e
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, bearings, seals, and housing pieces.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...paws21610697
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, bearings, seals, and housing pieces.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...f8usiedkdmm
This document provides instructions for disassembling the final drive on a 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the machine.
2. Dismantling the final drive components including removing gears, shafts, seals and housings.
3. Using various tools to separate components by driving out pins, lifting parts, and applying force as needed.
4. Disassembling internal components such as planetary gears and carriers from housings and each other.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...uddksemd8ud
This document provides instructions for disassembling the final drive on a Caterpillar 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the track assembly and travel motor.
2. Lifting the final drive and disassembling it into components like the cover, carrier assembly, ring gears, and main housing.
3. Using tools like pins, bolts, and lifting devices to separate each part while taking care to mark orientations and support heavy components.
4. Disassembling internal components of the carrier assembly and housing such as planetary gears, shafts, seals, and bearings.
Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001...jdjkskmikdkmd
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, shafts, seals, and housings.
This document provides instructions for disassembling the final drive on a Caterpillar 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the track assembly and travel motor.
2. Lifting the final drive and disassembling it into components like the cover, carrier assembly, ring gears, and main housing.
3. Using tools like pins, screws, and lifting devices to separate individual parts which are then cleaned and inspected.
4. Disassembling internal components of the carrier assembly like planetary gears and shafts.
The instructions describe each step in detail and include illustrations of the components and proper tooling to use. Safety notes are included about handling
This document provides instructions for disassembling the final drive on a 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the machine.
2. Dismantling the final drive components including removing gears, shafts, seals and housings.
3. Using various tools to separate components by driving out pins, lifting parts, and applying force as needed.
4. Disassembling internal components such as planetary gears and carriers from the main housing.
The instructions describe each step in detail and include illustrations of the components and proper tooling. Safety notes are included to handle parts carefully due to their weight.
This document provides instructions for disassembling the final drive on a Caterpillar 329D2 L excavator. The process involves:
1. Removing the final drive and separating it from the track assembly and travel motor.
2. Lifting the final drive and disassembling it into components like the cover, carrier assembly, ring gears, and main housing.
3. Using tools like pins, bolts, and lifting devices to separate individual parts from each other.
4. Cleaning components and keeping alignment marks to ensure proper reassembly. The document lists over 30 individual steps and provides illustrations for each step.
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, shafts, seals, and housings.
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, bearings, seals, and housing pieces.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts noted. Care must be taken due to the weights involved, with the final drive assembly weighing approximately 688 pounds and other parts ranging from 70 to 220 pounds.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...zan2736ban
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts provided, as some components like the housing weigh over 100kg. Care must be taken when using tools to separate components and remove retaining rings, seals, and bearings from inside the final drive assembly.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is largely the reverse of the disassembly steps and involves applying sealants and lubricants before reinstalling components.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...ikdkkdmdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f7fujksekmdm8u
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, shafts, and other components. Alignment marks should be made and weights of parts provided, as the components must be reinstalled in their original locations. Careful cleaning is important to prevent dirt from entering the mechanism during disassembly.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts provided, as some components like the housing weigh over 100kg. Care must be taken during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...ikdkkdmdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is largely the reverse of the disassembly steps and involves applying sealants and lubricants before reinstalling components.
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with tools and compounds used to install specific parts correctly.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, shafts, and other components. Alignment marks should be made and weights of parts provided, as the components must be reinstalled in their original locations. Careful cleaning is important to prevent dirt from entering the mechanism during disassembly.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...ufs89eodkdmdm
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts noted. Care must be taken due to the weights involved, with the final drive assembly weighing approximately 688 pounds and other parts ranging from 70 to 220 pounds.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized throughout and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
Caterpillar Cat 336F L Excavator (Prefix KCS) Service Repair Manual (KCS00001...cnp692569
The document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures include removing fasteners and connectors, loosening clamps, and installing replacement parts in the reverse order of removal while applying sealants and lubricants and torquing fasteners to the specified values. Safety precautions are provided regarding working on hot engine components and with flammable liquids.
1. The document provides step-by-step instructions for disassembling the travel motor of a 336F excavator.
2. It describes removing 27 components and parts from the travel motor in a specific sequence using various tools.
3. Special care must be taken when removing springs and components under pressure to avoid injury from released forces.
More Related Content
Similar to Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001 and up).pdf
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, shafts, seals, and housings.
This document provides instructions for disassembling the final drive on a 329D2L excavator. The steps include:
1. Removing the final drive assembly and placing it on a repair stand.
2. Removing the cover and gears/plates inside.
3. Dismantling the internal components of the final drive assembly, which includes removing planetary gears, bearings, seals, and housing pieces.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts noted. Care must be taken due to the weights involved, with the final drive assembly weighing approximately 688 pounds and other parts ranging from 70 to 220 pounds.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...zan2736ban
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts provided, as some components like the housing weigh over 100kg. Care must be taken when using tools to separate components and remove retaining rings, seals, and bearings from inside the final drive assembly.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is largely the reverse of the disassembly steps and involves applying sealants and lubricants before reinstalling components.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...ikdkkdmdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f7fujksekmdm8u
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, shafts, and other components. Alignment marks should be made and weights of parts provided, as the components must be reinstalled in their original locations. Careful cleaning is important to prevent dirt from entering the mechanism during disassembly.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts provided, as some components like the housing weigh over 100kg. Care must be taken during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...ikdkkdmdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is largely the reverse of the disassembly steps and involves applying sealants and lubricants before reinstalling components.
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with tools and compounds used to install specific parts correctly.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, shafts, and other components. Alignment marks should be made and weights of parts provided, as the components must be reinstalled in their original locations. Careful cleaning is important to prevent dirt from entering the mechanism during disassembly.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...ufs89eodkdmdm
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts noted. Care must be taken due to the weights involved, with the final drive assembly weighing approximately 688 pounds and other parts ranging from 70 to 220 pounds.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized throughout and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
Similar to Caterpillar Cat 329D2L Excavator (Prefix WDT) Service Repair Manual (WDT00001 and up).pdf (20)
Caterpillar Cat 336F L Excavator (Prefix KCS) Service Repair Manual (KCS00001...cnp692569
The document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures include removing fasteners and connectors, loosening clamps, and installing replacement parts in the reverse order of removal while applying sealants and lubricants and torquing fasteners to the specified values. Safety precautions are provided regarding working on hot engine components and with flammable liquids.
1. The document provides step-by-step instructions for disassembling the travel motor of a 336F excavator.
2. It describes removing 27 components and parts from the travel motor in a specific sequence using various tools.
3. Special care must be taken when removing springs and components under pressure to avoid injury from released forces.
This document provides instructions for disassembling and assembling the travel motor of a 336F excavator. The disassembly process involves 30 steps to remove all components of the travel motor. The assembly process reverses the disassembly with 27 steps and requires various tools to reinstall components in the proper order and orientation. Precautions are outlined to prevent injury from spring forces.
The document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures include removing parts in the specified order, cleaning components, installing new gaskets and O-rings, and torquing fasteners to the specified values. Safety precautions are provided regarding working on hot engine components and with flammable liquids.
This document provides instructions for disassembling the travel motor on 336F and 336F L Excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Precautions are provided to safely release stored energy from springs. Detailed illustrations accompany each step to ensure correct disassembly. Required tools are listed.
Caterpillar Cat 336E L HVG Excavator (Prefix RBS) Service Repair Manual (RBS0...cnp692569
The document provides instructions for installing and removing components related to the rear power take-off (RPTO) system on a Caterpillar C9.3 engine. The removal procedure includes removing the crankshaft rear seal, various bolts and gears, thrust washers, dowels, bearings, seals and the PTO shaft. The installation procedure specifies cleaning and lubricating parts before reinstalling components in reverse order, applying thread lock to bolts and torquing to specification.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...cnp692569
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves removing seals, bearings, springs and other components from the motor housing. The assembly process details installing these components in reverse order and applying lubricant or threadlock where specified. Proper torque values are listed for fasteners. The instructions note to mark components' orientations before removal to aid reinstallation.
Caterpillar Cat 336E L Excavator (Prefix KED) Service Repair Manual (KED00001...cnp692569
1. The document provides assembly instructions for a travel motor on an excavator. It details 28 steps to assemble the travel motor, including installing seals, springs, pistons, and other components.
2. Removal and installation instructions are provided for the final drive and travel motor assembly. 10 steps are outlined for removal, including draining oil, removing hoses and fittings, and using lifting tools. 13 steps are given for installation, with torque specifications for the reinstallation bolts.
3. Disassembly instructions for the final drive include removing the cover, plate, and links using lifting brackets and forcing bolts.
Caterpillar Cat 336E L Excavator (Prefix GTJ) Service Repair Manual (GTJ00001...cnp692569
The document provides instructions for disassembling and assembling a travel motor. It details 28 steps for travel motor assembly, including installing seals, springs, pistons and other components. Removal of the final drive and travel motor requires draining fluids, removing bolts and hoses, and lifting out the assembly. Reinstallation requires cleaning, applying sealant to bolts, and torquing bolts to the specified values.
The document provides instructions for installing and removing components related to the rear power take-off (RPTO) system on a Caterpillar C9.3 engine. The removal procedure includes removing the crankshaft rear seal, various bolts and gears, thrust washers, dowels, bearings, seals and the PTO shaft. The installation procedure specifies cleaning and lubricating parts before reinstalling components in reverse order, applying thread locking compound to bolts, and torquing bolts to the specified values.
This document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, removing components like the head, springs, plates, seals and bearings. It then outlines 17 steps for assembly, replacing these components in reverse order and noting specifics like lubrication, torque settings and alignment marks. Tools required are listed.
1. The document provides assembly instructions for a travel motor on an excavator. It details 28 steps to assemble the travel motor, including installing seals, springs, pistons, and other components.
2. Removal and installation instructions are provided for the final drive and travel motor assembly of an excavator. The procedure includes disconnecting hoses, removing mounting bolts, and lifting out the assembly.
3. Disassembly instructions are given for a final drive, including removing the cover, plate, and installing lifting brackets to remove internal components. Detailed diagrams accompany each step.
The document provides instructions for disassembling and assembling a travel motor. It details 28 steps for disassembling the travel motor, removing components like seals, springs, and plates. It then lists 13 steps for reassembling the travel motor and tightening components like bolts, hoses, and covers to the specified torques.
Caterpillar Cat 336D2 L Excavator (Prefix ZCT) Service Repair Manual (ZCT0000...cnp692569
This document provides disassembly and assembly instructions for the main hydraulic pump on a 336D2 L excavator. It lists over 50 steps to fully disassemble the pump by removing covers, valves, springs, seals, gears, and other components. The corresponding assembly section lists the steps to reinstall all components in reverse order, noting requirements for special tools and heating/pressing some bearings and seals back into place. Precautions are included for releasing spring forces to avoid injury.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...cnp692569
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools to install retaining rings and measure end play, and filling the hydraulic system.
Caterpillar Cat 336D2 L Excavator (Prefix XBH) Service Repair Manual (XBH0000...cnp692569
This document provides instructions for installing and removing the final drive and travel motor, and disassembling and assembling the swivel, on Caterpillar 336D2 and 336D2 L excavators. The procedures include using various tools to lift heavy components, installing and tightening bolts, replacing O-rings and seals, and checking for leaks during assembly. Cleanliness is emphasized to prevent contamination.
Caterpillar Cat 336D2 L Excavator (Prefix WDC) Service Repair Manual (WDC0000...cnp692569
The document provides instructions for assembling and disassembling components of a piston motor (hydraulic fan) and hydraulic lockout control on excavator models 336D2 and 336D2 L. It describes 17 steps for assembling the piston motor, including installing bearings, seals, springs, and retaining rings. It also describes removing and disassembling the hydraulic lockout control into individual parts and reassembling it. Safety precautions are provided for parts under spring tension.
Caterpillar Cat 336D2 L Excavator (Prefix WBC) Service Repair Manual (WBC0000...cnp692569
The document provides instructions for removing and installing valve guides, valve seat inserts, an engine oil filter base, and oil cooler on a Caterpillar C9 engine. The removal procedures describe using various tools to remove the components from the cylinder head and engine. The installation sections explain cleaning and lubricating parts before reinstalling them using specific tools and following the correct procedure.
Caterpillar Cat 336D2 L Excavator (Prefix TLY) Service Repair Manual (TLY0000...cnp692569
The document provides instructions for disassembling and assembling a piston pump. It includes 30 steps for assembly, beginning with cleaning parts and ending by filling the hydraulic system with oil. The 3 steps for disassembly are: 1) removing bolts and the head, 2) removing internal components like pistons and bearings, and 3) using tools to remove the rotating group and bearing cone. Protective equipment is recommended as parts are under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix LAM) Service Repair Manual (LAM0000...cnp692569
This document provides instructions for removing and installing the unit injector hydraulic pump on a Caterpillar C9 engine. The removal process involves disconnecting fuel lines and electrical connections, removing mounting bolts, and taking out the O-ring seal. Installation is the reverse of removal, and includes cleaning parts, applying a new O-ring seal, reinstalling mounting bolts, and reconnecting fuel lines and electrical connections. Proper cleaning and containment of fluids is emphasized. Both non-dual and dual tapered roller bearing pump types are covered.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 L EXCAVATOR WDT
Configuration: 329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326D2, 329D2 and 330D2 Excavators Machine Systems
Media Number -UENR6134-08 Publication Date -01/09/2018 Date Updated -12/09/2018
i05453056
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7611 Handle As 2
8S-7615 Pin As 2
283-1495 Stand Assembly 2
B 439-3939 Link Bracket As 2
C
154-6184 Forcing Bolt (M 20) 2
154-6185(1)
Forcing Bolt (M 24) 2
(1)
For Use on 329 and 330 sales models
Start By:
a. Separate the track assembly.
b. Remove the travel motor.
1/3
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00489826
Typical Example
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
1. Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 2 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight
lifting tension on the final drive.
Illustration 3 g00712737
2/3
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Note: Mark the orientation of bolt holes (2) for the travel motor for installation purposes.
3. Remove bolts (3) and the washers from the final drive.
Illustration 4 g00712749
4. Use Tooling (C) in order to remove the final drive from the frame.
5. Carefully remove final drive (1). The weight of final drive (1) and the sprocket is
approximately 312 kg (688 lb).
6. Remove Tooling (C) from the frame.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Apr 30 08:38:20 UTC+0800 2020
3/3
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 L EXCAVATOR WDT
Configuration: 329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326D2, 329D2 and 330D2 Excavators Machine Systems
Media Number -UENR6134-08 Publication Date -01/09/2018 Date Updated -12/09/2018
i02606369
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 154-6181 Forcing Screw 1
D 138-7574 Link Bracket 2
E
5F-7366 Forcing Screw 1
1P-5546 Crossblock 1
1U-9889 Crossblock 1
1P-0520 Driver Group 1
6V-7888 Puller Leg 2
1H-3112 Puller Assembly 1
1P-5551 Adjustable Screw Assembly 1
F 1U-8846 Gasket Sealant 1
Start By:
a. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
1/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
Illustration 1 g00708089
2. Fasten the final drive to Tooling (A), as shown. The combined weight of the final drive and
final drive sprocket is approximately 312 kg (688 lb).
3. Remove bolts (1) and the washers that hold the cover in position.
Illustration 2 g00708090
4. Remove the setscrews from the cover. Fasten Tooling (B) and a suitable lifting device to
cover (2), as shown. The weight of cover (2) is approximately 32 kg (70 lb). Remove cover
(2).
2/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 3 g00708091
5. Remove thrust plate (3) from cover (2).
6. Remove plugs (4) from cover (2).
Illustration 4 g00708235
7. Remove O-ring seals (5) from both plugs (4) that were in the cover.
Illustration 5 g00708092
8. Remove spacer (6) from carrier assembly (7).
9. Remove sun gear (8) from carrier assembly (7).
3/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 10. Remove carrier assembly (7) by lifting the carrier assembly straight up. The weight of
carrier assembly (7) is approximately 14 kg (30 lb).
Illustration 6 g01304883
11. Disassemble carrier assembly (7), as follows.
a. Drive spring pin (10) into planetary shaft (9) with a hammer and a punch.
Illustration 7 g00708144
b. Remove planetary shaft (9) with spring pin (10) from the carrier assembly.
c. Remove spring pin (10) from planetary shaft (9) with a hammer and a punch.
4/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 8 g00708218
d. Remove thrust washers (11) and planetary gear (13) from the carrier assembly.
e. Remove bearing (12) from planetary gear (13).
12. Repeat Steps 11.a through 11.e in order to remove the remaining planetary gears from the
carrier assembly.
Illustration 9 g00708162
13. Remove sun gear (14) from carrier assembly (15).
Illustration 10 g00708325
14. Remove spacer (16).
5/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 11 g00708184
Note: It will be necessary to pry ring gears (17) away from main housing (18) in order to
install the lifting slings.
15. Fasten a suitable lifting device to ring gears (17), as shown. Remove the ring gears from
main housing (18). The weight of ring gears (17) is approximately 45 kg (100 lb).
Illustration 12 g00708360
16. Use a screwdriver or a chisel in order to separate the two ring gears (17).
Note: The two ring gears are held together with Tooling (F). It may be necessary to heat the
ring gears in order to soften the sealant. Do not heat over 135 °C (275 °F) for more than
thirty minutes.
6/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 13 g00708172
17. Position a 12.7 mm (0.50 inch) shackle under carrier assembly (15).
18. Fasten a suitable lifting device to the shackle.
19. Slowly lift carrier assembly (15) from the final drive. The weight of carrier assembly (15) is
approximately 39 kg (85 lb).
20. Disassemble carrier assembly (15), as follows.
Illustration 14 g00708175
a. Drive spring pin (20) into planetary shaft (19) with a hammer and a punch.
7/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 15 g00708370
Illustration 16 g00708220
b. Remove planetary shaft (19) with spring pin (20) from the carrier assembly.
c. Remove spring pin (20) from planetary shaft (19) with a hammer and a punch.
d. Remove thrust washers (21) and planetary gear (23) from the carrier assembly.
e. Remove bearings (22) from planetary gear (23).
21. Repeat Steps 20.a through 20.e in order to remove the remaining planetary gears from the
carrier.
Illustration 17 g00708186
22. Remove O-ring seal (24) from main housing (18).
8/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g00708187
23. Remove bolts (25) from gear (26).
Illustration 19 g00708202
24. Use Tooling (C) in order to remove gear (26) from main housing (18).
Note: The motor housing will separate from the main housing (18) once gear (26) is
removed. Make sure that the motor housing is supported.
Illustration 20 g00708211
25. Remove shims (27) from the main housing.
9/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 21 g00708212
26. Fasten Tooling (D) and a suitable lifting device to main housing (18), as shown.
27. Use a hammer and a punch in order to separate main housing (18) and the final drive
sprocket from the motor housing (28). The combined weight of main housing (18) and the
final drive sprocket is approximately 82 kg (180 lb).
Illustration 22 g00708214
28. Remove Duo-Cone seal (29) from motor housing (28).
29. Remove alignment pins (30).
10/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(S...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 23 g00708215
Illustration 24 g00708216
30. Remove Duo-Cone seal (31) from main housing (18).
31. Use Tooling (E) in order to remove bearings (32) and (33) from the main housing.
32. If necessary, remove the final drive sprocket from the main housing.
33. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Apr 30 08:39:16 UTC+0800 2020
11/11
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(S...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 329D2 L EXCAVATOR WDT
Configuration: 329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326D2, 329D2 and 330D2 Excavators Machine Systems
Media Number -UENR6134-08 Publication Date -01/09/2018 Date Updated -12/09/2018
i03508206
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 138-7575 Link Bracket 3
E 4C-8359 Eyebolt 2
F 138-7574 Link Bracket 2
G 138-7576 Link Bracket 2
Start By:
a. Start by removing the final drive. Refer to Disassembly and Assembly, "Final Drive -
Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled to the original locations.
1/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 1 g00892878
2. Use Tooling (G) and a suitable lifting device to position the final drive assembly onto
Tooling (A). The weight of the final drive assembly is approximately 550 kg (1200 lb).
3. Remove bolts (1).
Illustration 2 g00892883
4. Use Tooling (B) and a suitable lifting device to remove cover (2). The weight of cover (2) is
approximately 32 kg (70 lb).
Illustration 3 g00892888
2/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 5. Remove bolts (3) and gear (4). Check plate (6). Replace plate (6) if plate (6) is worn.
Remove plugs (5) from cover (2).
Illustration 4 g00892906
6. Remove O-ring seals (7) from plugs (5).
Illustration 5 g00892930
7. Remove gear (8) and spacer (9).
Illustration 6 g00892965
3/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 8. Use Tooling (C) to remove retaining ring (10). Remove washer (11) and gear (12). Remove
bearing assembly (13) and washer (14).
9. Repeat Step 8 for the other two gear assemblies.
Illustration 7 g00892968
10. Remove retaining ring (15).
Illustration 8 g00892975
11. Remove carrier assembly (16).
4/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 9 g01389804
12. Use a suitable press to remove the shafts from carrier assembly (16).
Illustration 10 g00892977
13. Remove gear (17) and spacer (18).
Illustration 11 g00892997
5/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 14. Use Tooling (D) and a suitable lifting device to remove planetary carrier (19). The weight of
planetary carrier (19) is approximately 48 kg (105 lb).
Illustration 12 g00893019
15. Remove retaining ring (21). Lift planetary carrier (19) off sun gear (20).
Illustration 13 g00896860
16. Drive spring pin (23) into planetary shaft (22).
Illustration 14 g00893043
6/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 17. Remove planetary shaft (22). Use a suitable punch to remove spring pin (23) from planetary
shaft (22).
Illustration 15 g00896863
18. Remove washers (24) and bearing (25) from planetary gear (26).
19. Repeat Steps 16 through 18 for the other two planetary gears.
Illustration 16 g01842853
20. Remove gear (27). Remove spacer (27A).
Illustration 17 g01842974
7/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 21. Use two people to remove carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
Illustration 18 g01843140
22. Drive spring pin (30) into shaft (29).
Illustration 19 g00893658
23. Remove shaft (29). Use a suitable punch to remove spring pin (30) from shaft (29).
Illustration 20 g00893674
24. Remove washers (31) and bearings (32) from planetary gear (33).
8/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. 25. Repeat Steps 22 through 24 for the other three planetary gears.
Illustration 21 g01208300
26. Fasten Tooling (E) and a suitable lifting device to ring gear (34), as shown. Remove ring
gear (34) from sprocket housing (35). The weight of ring gear (34) is approximately 66 kg
(146 lb).
Illustration 22 g01208542
27. Remove O-ring seal (36) from sprocket housing (35).
Illustration 23 g01208553
9/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. 28. Remove bolts (37) from coupling gear (38).
Illustration 24 g01208572
29. Install suitable forcing bolts (39) in coupling gear (38). Tighten the forcing bolts evenly in
order to loosen coupling gear (38). Remove the coupling gear from the motor housing.
Illustration 25 g01208578
Illustration 26 g01208625
30. Remove shims (40) from the motor housing.
10/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(S...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Note: Inner cones and outer bearing cones (42) are a slip fit on the motor housing. While
you remove sprocket housing (35) from the motor housing, inner bearing cone (42) may
stay with the sprocket housing or the inner bearing cone may stay on the motor housing.
31. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Separate the
sprocket housing from the motor housing. The weight of sprocket housing (35) is
approximately 109 kg (240 lb).
Illustration 27 g01208626
32. Remove the locating pins from the motor housing.
33. Remove Duo-Cone seal (41) from the motor housing.
34. If inner bearing cone (42) remained on the motor housing, then remove the inner bearing
cone.
Illustration 28 g01208633
35. Remove Duo-Cone seal (43) from the sprocket housing.
36. If inner bearing cone (42) remained on the sprocket housing, then remove the inner bearing
cone.
37. Remove the bearing cups from the sprocket housing.
Thu Apr 30 08:40:12 UTC+0800 2020
11/12
329D2 L Excavators WDT00001-UP (MACHINE) POWERED BY C7.1 Engine(S...
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...