This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists the required tools and presents a step-by-step procedure for disassembling the final drive components. This includes removing gears, seals, springs, and other parts. It then describes assembling the main housing, motor housing, and final drive components in reverse order.
Caterpillar cat 324 d fm excavator (prefix jkr) service repair manual (jkr000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It begins with a list of required tools. The disassembly procedure describes removing over 20 components of the final drive in detailed steps. It then describes using a special bench and tools to disassemble additional parts. The assembly section provides the reverse steps to reassemble the final drive components back into the main housing and motor housing.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f89siekkmdmm2w
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f8uejkdkdmm3e
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It describes in 21 steps how to disassemble the final drive components using various tools. It then describes in 13 steps the process for assembling the final drive components and housing, including installing bearings and seals. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...gongfuao7509
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and other components back into the final drive housing using various tools. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...shibi1322
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...8foskkdjdkdm3e
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmmdmdm
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps to disassemble the final drive, including removing gears, seals, springs, and other components. It then describes 17 steps for assembling the final drive components using various tools, applying hydraulic pressure to install components like locknuts, and reinstalling parts in reverse order of disassembly.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmdmmdd
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar cat 324 d fm excavator (prefix jkr) service repair manual (jkr000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It begins with a list of required tools. The disassembly procedure describes removing over 20 components of the final drive in detailed steps. It then describes using a special bench and tools to disassemble additional parts. The assembly section provides the reverse steps to reassemble the final drive components back into the main housing and motor housing.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f89siekkmdmm2w
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...f8uejkdkdmm3e
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It describes in 21 steps how to disassemble the final drive components using various tools. It then describes in 13 steps the process for assembling the final drive components and housing, including installing bearings and seals. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...gongfuao7509
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and other components back into the final drive housing using various tools. The document includes illustrations to supplement the written instructions.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...shibi1322
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...8foskkdjdkdm3e
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install locking nuts.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmmdmdm
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps to disassemble the final drive, including removing gears, seals, springs, and other components. It then describes 17 steps for assembling the final drive components using various tools, applying hydraulic pressure to install components like locknuts, and reinstalling parts in reverse order of disassembly.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual (JLS0...jfkskmdmmdd
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...yin9niaojiao
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...ifoseidkkd
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like springs, pistons, gears, sprockets, bearings, seals and housings. It also describes 14 steps for assembling components using tools like pullers, drivers and a hydraulic bench. The overall procedure involves carefully removing and installing small parts using various specialized tools to take the final drive apart and rebuild it.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...JayHaines2
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fujsekksmem
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing gears, seals, springs, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fjskkmemem
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install parts like the locknut.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...dikskedmdm
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shun96145luo
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7useijdkdmd1
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...fjdkksmemd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7siejdkdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the process, which includes removing components like the sprocket, planetary gear sets, pistons, and seals. It also describes using a special bench and tooling to remove and install components while applying precise torque levels. The overall procedure involves dismantling the entire final drive assembly down to individual parts and then reassembling it in reverse order.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...dxem8295569
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskedmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing the sprocket, planetary gear sets, piston, and other components. It also describes using a special bench and tooling to remove the locknut requiring high torque. The assembly procedure is listed but not described in detail.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fhjsjekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tools to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shudun96087
This document provides instructions for disassembling and assembling the final drive on a 324D FM excavator. It lists required tools and parts and provides detailed step-by-step instructions and illustrations for removing components like springs, pistons, gears, and seals. It also describes using a special final drive bench assembly tool to assist with removing the final drive locknut which requires up to 2000 PSI of pressure.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...qme229722
1. The document provides instructions for disassembling and assembling the final drive of a 324D FM excavator.
2. It lists required tools and parts and provides step-by-step procedures with accompanying illustrations for removing components like springs, pistons, gears, and seals from the final drive housing.
3. Reassembly instructions are also provided, showing how to install bearings, seals, and other components back into the housings in the reverse order of disassembly.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...kesi7153062
1. The document provides assembly and disassembly instructions for the final drive of a 324D FM excavator.
2. It details the required tools and parts, and provides a step-by-step procedure to disassemble and assemble the various components of the final drive.
3. The components include the main housing, motor housing, planetary gear sets, sprocket, piston, springs, and other internal parts. Detailed illustrations supplement the assembly/disassembly steps.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It describes in detail how to remove over 20 different components of the final drive including gears, seals, plates, and housing pieces. Detailed illustrations are provided to supplement the text instructions. Specialized tools are listed that are required for tasks like removing retaining rings and planetary gear sets. Proper safety precautions are noted, and references to other documents are provided for additional information.
Caterpillar cat 325 d fm ll excavator (prefix c9m) service repair manual (c9m...kmf9ioseodk
The document provides disassembly and assembly instructions for a final drive on a 325D FM LL EXCAVATOR. It details 21 steps for disassembly, including removing springs, pistons, gears, and other components. It also notes tools required and safety precautions. Assembly is not described in the same level of detail, listing only the assembly procedure title and table of required tools.
Clark C500, Y180 Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material is not to be distributed. The index includes sections on engines, transmissions, hydraulics, electrical systems, brakes, steering and other components. Safety practices and proper maintenance procedures are outlined to avoid injury and ensure safe operation.
Clark C500, Y250S Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and should not be distributed. The document contains diagrams and descriptions of various forklift components and systems, grouped by number. Safety warnings and instructions for safe maintenance practices are also provided.
The document provides maintenance and safety information for a Clark lift truck model SM-560. It includes sections on safety signs and messages, user safe maintenance practices, and a planned maintenance program. The planned maintenance program outlines periodic inspections and maintenance tasks that should be performed, including inspecting nameplates, wheels and tires, controls, brakes, steering, batteries, and mechanisms. It stresses the importance of a clean lift truck and testing all functions before returning the truck to operation.
More Related Content
Similar to Caterpillar Cat 324D FM EXCAVATOR (Prefix JKR) Service Repair Manual (JKR00001 and up).pdf
Caterpillar Cat 324D FM LL EXCAVATOR (Prefix JLS) Service Repair Manual Insta...yin9niaojiao
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level when using assembly tools. The document includes illustrations and lists required tools for each procedure.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...ifoseidkkd
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like springs, pistons, gears, sprockets, bearings, seals and housings. It also describes 14 steps for assembling components using tools like pullers, drivers and a hydraulic bench. The overall procedure involves carefully removing and installing small parts using various specialized tools to take the final drive apart and rebuild it.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...JayHaines2
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing plates, springs, pistons, gears, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fujsekksmem
This document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It outlines 21 steps for disassembly, which include removing gears, seals, springs, and other components. It also outlines 16 steps for assembly, which include installing bearings, seals, gears, and adjusting the torque level using various tools. The overall document provides detailed technical instructions for maintenance personnel to complete a full disassembly and reassembly of the final drive system.
Caterpillar cat 324 d fm ll excavator (prefix jls) service repair manual (jls...fjskkmemem
The document provides instructions for disassembling and assembling the final drive of a 324D FM LL EXCAVATOR. It lists required tools and parts and describes 21 steps for disassembling components like the brake discs, sprocket, gears, and bearings. It also describes 17 steps for assembling components using a final drive bench and tools to apply torque and remove/install parts like the locknut.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...djdksmmdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...dikskedmdm
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tooling to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shun96145luo
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7useijdkdmd1
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified due to component weights up to 816 kg.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...fjdkksmemd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...f7siejdkdmd
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the process, which includes removing components like the sprocket, planetary gear sets, pistons, and seals. It also describes using a special bench and tooling to remove and install components while applying precise torque levels. The overall procedure involves dismantling the entire final drive assembly down to individual parts and then reassembling it in reverse order.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...dxem8295569
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and presents step-by-step procedures with illustrations. The procedures include removing components such as springs, pistons, gears, and seals. It also describes using a special bench and tooling to remove the locknut requiring high torque. Proper lifting devices are specified for heavy components.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskedmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing the sprocket, planetary gear sets, piston, and other components. It also describes using a special bench and tooling to remove the locknut requiring high torque. The assembly procedure is listed but not described in detail.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fhjsjekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It lists required tools and describes each step of the disassembly process, which includes removing plates, springs, pistons, gears, and other components. It also describes using a special bench and tools to remove a locknut from the final drive assembly. Finally, it outlines the process for disassembling the main and motor housings, including removing bearings, seals, and other parts.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...shudun96087
This document provides instructions for disassembling and assembling the final drive on a 324D FM excavator. It lists required tools and parts and provides detailed step-by-step instructions and illustrations for removing components like springs, pistons, gears, and seals. It also describes using a special final drive bench assembly tool to assist with removing the final drive locknut which requires up to 2000 PSI of pressure.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...qme229722
1. The document provides instructions for disassembling and assembling the final drive of a 324D FM excavator.
2. It lists required tools and parts and provides step-by-step procedures with accompanying illustrations for removing components like springs, pistons, gears, and seals from the final drive housing.
3. Reassembly instructions are also provided, showing how to install bearings, seals, and other components back into the housings in the reverse order of disassembly.
Caterpillar Cat 324D FM EXCAVATOR (Prefix JGK) Service Repair Manual (JGK0000...kesi7153062
1. The document provides assembly and disassembly instructions for the final drive of a 324D FM excavator.
2. It details the required tools and parts, and provides a step-by-step procedure to disassemble and assemble the various components of the final drive.
3. The components include the main housing, motor housing, planetary gear sets, sprocket, piston, springs, and other internal parts. Detailed illustrations supplement the assembly/disassembly steps.
Caterpillar cat 324 d fm excavator (prefix jgk) service repair manual (jgk000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 324D FM excavator. It describes in detail how to remove over 20 different components of the final drive including gears, seals, plates, and housing pieces. Detailed illustrations are provided to supplement the text instructions. Specialized tools are listed that are required for tasks like removing retaining rings and planetary gear sets. Proper safety precautions are noted, and references to other documents are provided for additional information.
Caterpillar cat 325 d fm ll excavator (prefix c9m) service repair manual (c9m...kmf9ioseodk
The document provides disassembly and assembly instructions for a final drive on a 325D FM LL EXCAVATOR. It details 21 steps for disassembly, including removing springs, pistons, gears, and other components. It also notes tools required and safety precautions. Assembly is not described in the same level of detail, listing only the assembly procedure title and table of required tools.
Similar to Caterpillar Cat 324D FM EXCAVATOR (Prefix JKR) Service Repair Manual (JKR00001 and up).pdf (19)
Clark C500, Y180 Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material is not to be distributed. The index includes sections on engines, transmissions, hydraulics, electrical systems, brakes, steering and other components. Safety practices and proper maintenance procedures are outlined to avoid injury and ensure safe operation.
Clark C500, Y250S Forklift Service Repair Manual.pdfdjdksmmdmd
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and should not be distributed. The document contains diagrams and descriptions of various forklift components and systems, grouped by number. Safety warnings and instructions for safe maintenance practices are also provided.
The document provides maintenance and safety information for a Clark lift truck model SM-560. It includes sections on safety signs and messages, user safe maintenance practices, and a planned maintenance program. The planned maintenance program outlines periodic inspections and maintenance tasks that should be performed, including inspecting nameplates, wheels and tires, controls, brakes, steering, batteries, and mechanisms. It stresses the importance of a clean lift truck and testing all functions before returning the truck to operation.
Clark TMG 12-25 Forklift Service Repair Manual.pdfdjdksmmdmd
This document is a service manual for Clark forklifts that contains information on safely maintaining the forklifts. It includes sections on safety procedures, periodic maintenance schedules, specifications for various parts, and procedures for servicing components such as motors, hydraulics, brakes, steering, and other systems. The manual uses a standardized grouping and numbering system to organize the content and make specific information easy to locate.
Clark TMG 13-20X Forklift Service Repair Manual.pdfdjdksmmdmd
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Komatsu SK815-5 Skid Steer Loader Service Repair Manual (SN 37BF00902 and up)...djdksmmdmd
This shop manual provides instructions for servicing Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. It is divided into sections covering the machine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. Safety precautions are prominently featured to ensure workers' safety during repair operations.
John Deere Alternators & Starter Motors Service Repair Manual.pdfdjdksmmdmd
This document is a Component Technical Manual from Deere & Company that provides service information for alternators and starter motors. It contains sections on safety, general information, and electrical system basics. The safety section outlines proper procedures and precautions for working on electrical components, including preventing battery explosions, handling fluids safely, and wearing protective equipment.
John Deere 12PC Walk-Behind Mower Service Repair Manual.pdfdjdksmmdmd
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service the components, diagnose issues, and perform repairs on the mowers.
John Deere 12PB Walk-Behind Mower Service Repair Manual.pdfdjdksmmdmd
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 5E 2BV Blower Service Repair Manual.pdfdjdksmmdmd
The document provides specifications for the 5E and 2BV blowers, including engine details like displacement, bore, stroke, compression ratio, carburetor, lubrication, fuel, idle and operating speeds, starter, ignition system, spark plug, magneto air gap, and fuel tank capacities. It also lists the blower type as centrifugal and single stage.
John Deere 3-179D OEM Engine Service Repair Manual.pdfdjdksmmdmd
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks safely operating, including inspections, operational checks, cleaning, lubrication, and adjustments. The document emphasizes safety practices for maintenance, such as raising the wheels, disconnecting power, and using blocks before working under lifted components.
Kubota BX1500D Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions for using a parts book for an engine. It explains the column headings in parts book pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and what they represent. An example page from the parts book is then shown listing the specific parts for an engine with the corresponding information.
Clark EPG 15-18 Forklift Service Repair Manual.pdfdjdksmmdmd
This document is a service manual for Clark forklifts that contains information on safely maintaining the forklifts. It includes sections on safety procedures, periodic maintenance schedules, specifications for parts, and procedures for servicing various systems of the forklift such as the battery, wiring, motors, brakes, hydraulics, tilt cylinders, and more. The document uses a standardized grouping and numbering system to organize the content and make specific sections and pages easy to locate.
Kubota BX2230D Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. The remainder of the document lists specific part numbers and descriptions for a BX2230D tractor organized by system or component.
Kubota L35 Tractor Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. Finally, it provides an index of all product parts for reference L35 and lists the relevant parts book for each item.
Kubota G4200H Lawn mower Parts Catalogue Manual.pdfdjdksmmdmd
The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then provides a sample page from a parts book for a G4200H product that lists over 200 individual part numbers, descriptions, quantities, serial number ranges, interchangeability, remarks and weights.
Komatsu SK714-5 Skid Steer Loader Service Repair Manual (SN 37AF01876 and up)...djdksmmdmd
This document provides shop manual instructions for adjusting valve clearance on Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The instructions include removing covers to access the valves, rotating the drive shaft to specific positions, checking valve clearance with feeler gauges, adjusting clearance by turning screws, and reassembling covers. Clearance specifications and tightening torques are provided. The document also provides a zero setting procedure for the SK815-5 turbo model before performing the clearance adjustment.
John Deere Yanmar Engines 322, F912, F932 Service Repair Manual.pdfdjdksmmdmd
This document is a component technical manual for Yanmar gasoline engines. It contains instructions for repairing engines, fuel systems, and electrical systems. It also includes theory of operation, diagnostic procedures, and testing procedures. The manual should be used along with the machine's technical manual for information on removing and installing the engine, and accessing engine components. The manual emphasizes safety and provides illustrated, step-by-step instructions for diagnosis and repair of engine systems.
John Deere POWERTECH 4.5L & 6.8L Diesel Engines Base Engine Service Repair Ma...djdksmmdmd
This document provides instructions for servicing Powertech 4.5L and 6.8L diesel engines. It outlines five technical manuals that cover different aspects of the engines, with this document focusing on the base engine. The introduction provides safety information and explains how to use the manual, including cleaning the engine before repair. It directs technicians to companion manuals for fuel system repair, operation and diagnostics based on the specific fuel system for the engine being serviced.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324D FM EXCAVATOR JKR
Configuration: 324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
324D and 325D Forest Machines Machine Systems
Media Number -KENR5986-02 Publication Date -01/02/2012 Date Updated -27/06/2017
i02568643
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Start By:
a. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Table 1
Required Tools
Tool Part Number Part Description Qty
A
3H-0468 Puller Plate 2
5F-7366 Forcing Screw 1
8B-7548 Push-Puller Tool Gp 1
8T-0070 Bolt 2
8T-3282 Hard Washer 2
B 1P-0520 Driver Gp 1
C 1P-2321 Combination Puller 1
D 138-7573 Link Bracket 3
E
156-7100 Slide Hammer Puller Gp 1
M5x0.8x1.5 Bolt 1
F 10mm Drill 1
G 138-7575 Link Bracket 3
H 199-6557 Spanner Socket 1
1/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. J 127-8458 Final Drive Bench Ar 1
K 127-8468 Reaction Bar As 1
L
3S-6224 Electric Hydraulic Pump Gp 1
8T-0820 Hydraulic Pressure Gauge 1
3B-7722 Pipe Bushing 2
1P-2376 Quick Connect Coupler 2
1P-2377 Dust Plug 2
8F-0024 Hose As 2
M 128-4075 Shaft As 1
N 194-3885 Adapter Plate 1
Illustration 1 g00903052
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. 1. Install Tooling (A) and Tooling (B). Apply slight pressure to plate (1). Remove retaining
ring (2).
2. Carefully remove Tooling (A) and Tooling (B).
3. Remove plate (1).
4. Remove O-ring seal (3).
Illustration 2 g00903050
5. Remove springs (4).
6. Remove piston (5).
Illustration 3 g00903054
a. Remove piston seals (6) from piston (5).
3/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 4 g00903611
7. Remove coupler (7).
8. Remove brake discs (8).
Illustration 5 g00903613
9. Remove bottom brake plate (9).
Illustration 6 g01286968
10. Turn over the final drive.
4/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. 11. Attach a suitable lifting device to sprocket (10). The weight of sprocket (10) is
approximately 41 kg (90 lb). Remove sprocket (10).
12. Remove cover (11).
Illustration 7 g00903120
13. Remove sun gear (12). Remove planetary gear set (13). Remove retaining rings (14).
Illustration 8 g00903432
a. Install Tooling (C). Remove gears (15).
5/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 9 g00903928
b. Cut a notch in the bearing cup. Remove one row of bearing rollers through the notch.
After the bearing rollers are out, the remaining parts will drop out. Remove the
retaining ring from the bearing cup.
Illustration 10 g00903433
14. Remove planetary gear set (16).
a. Remove retaining rings (17).
6/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 11 g00903459
b. Install Tooling (C). Remove gear (18).
Illustration 12 g00903465
15. Remove bolts (19).
16. Remove retainer ring (19A).
7/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 13 g01041035
17. Install Tooling (D) and a suitable lifting device to planetary gear set (20). The weight of
planetary gear set (20) is approximately 36 kg (80 lb).
Illustration 14 g00903517
Illustration 15 g00903699
a. Install Tooling (C). Remove gear (21).
b. Remove retaining ring (22).
Illustration 16 g00903703
8/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. 18. Rotate ring (23) for one notch.
19. Remove ring (23).
Illustration 17 g00903711
20. Install Tooling (E) into dowel pin (24). Remove dowel pin (24) from locknut (25).
Note: The threads for the nut will be damaged from the dowel pins.
21. Use Tooling (F) to drill the holes in order to remove the damaged threads.
127-8458 Final Drive Disassembly and Assembly Bench
Note: The following procedure is for the 127-8458 Final Drive Disassembly and Assembly
Bench.
Reference: Refer to the Tool Operating Manual, NEHS0673 for further procedures concerning
127-8458 Bench.
Illustration 18 g00910492
1. Remove the suitable lifting device from Tooling (G) and attach the suitable lifting device to
the upper half of Tooling (J).
9/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. 2. Remove the upper half of Tooling (J). The weight of the upper half of Tooling (J) is
approximately 816 kg (1800 lb).
3. Install Tooling (N) onto the lower half of Tooling (J). The weight of Tooling (N) is
approximately 100 kg (221 lb).
Illustration 19 g01041039
4. Fasten Tooling (G) and a suitable lifting device to the final drive.
5. Fasten the final drive onto the lower half of Tooling (N).
Illustration 20 g00910490
6. Install bolts (27) in the final drive through adapter ring (26).
10/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 21 g01041044
7. Fasten Tooling (G) and a suitable lifting device to Tooling (H). The weight of Tooling (H)
is approximately 45 kg (100 lb).
8. Lower Tooling (H) into the final drive. Make sure that the notches in nut (25) are aligned
with the keys on Tooling (H).
9. Remove Tooling (I) and the suitable lifting device.
Illustration 22 g00910496
10. Place Tooling (K) onto Tooling (H).
11. Fasten a suitable lifting device to the upper half of Tooling (J) and install the upper half of
Tooling (J) to the lower half of Tooling (J). Pin the two halves together.
11/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 23 g00910497
12. Attach Tooling (L) to the pressure reducing valve manifold, as shown.
13. Set the torque level for the bench to 2000 psi (14500 lb ft). Do not exceed this pressure.
Reference: Refer to the Tool Operating Manual, NEHS0673 for setting the torque level.
Illustration 24 g00910500
14. Place Tooling (M) through the bench and into Tooling (K).
15. Remove locknut (25). The breakaway torque will vary. The nut will loosen usually at
1400 psi (10750 lb ft).
16. Fasten a suitable lifting device to the upper half of Tooling (J).
17. Remove the upper half of Tooling (J).
Disassembly Procedure for the Main Housing and the Motor Housing
12/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 25 g01041039
1. Fasten Tooling (G) and a suitable lifting device to main housing (29), as shown.
2. Separate the main housing (29) from the motor housing (30). The weight of the main
housing is approximately 123 kg (270 lb).
Note: Two outer races and one roller bearing will be removed with the main housing. The
other roller bearing and the two Duo-cone seal kits will remain with the motor housing.
3. Disassemble motor housing (30), as follows:
Illustration 26 g00910506
a. Use two screwdrivers and remove bearing (31) from the motor housing.
b. Remove the Duo-cone seal kit (32) from the motor housing.
13/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 27 g00910508
c. Remove the two backup rings and O-ring seal (33) from the motor housing.
4. Disassemble the main housing (29), as follows:
Illustration 28 g00910510
a. Remove bearing (34) from the main housing (29).
14/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 29 g00910511
b. Turn main housing (29) over 180 degrees, as shown.
c. Remove seal (35).
d. Remove bearing (36).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Aug 8 00:45:45 UTC+0800 2020
15/15
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324D FM EXCAVATOR JKR
Configuration: 324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
324D and 325D Forest Machines Machine Systems
Media Number -KENR5986-02 Publication Date -01/02/2012 Date Updated -27/06/2017
i07141171
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 126-3994 Duo-Cone Seal Installer As 1
B 138-7573 Link Bracket 3
C 127-8458 Final Drive Bench Ar 1
D 154-9315 Thread File Group 1
E 138-7575 Link Bracket 2
F 199-6557 Spanner Wrench As 1
G 127-8468 Reaction Bar As 1
H
3S-6224 Electric Hydraulic Pump Gp 1
8T-0820 Hydraulic Pressure Gauge 1
3B-7722 Pipe Bushing 2
1P-2376 Quick Connect Coupler 2
1P-2377 Dust Plug 2
8F-0024 Hose As 2
I 128-4075 Shaft As 1
K 1P-0520 Driver Gp 1
1/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. L 1U-8223 Lifting Sling 2
M
3H-0468 Puller Plate 2
5F-7366 Forcing Screw 1
8B-7548 Push-Puller Tool Gp 1
8T-0070 Bolt 2
8T-3282 Hard Washer 2
1P-0520 Driver Gp 1
Assembly Procedure for the Main Housing
1. Assemble main housing (3), as follows:
Illustration 1 g00911498
a. Install bearing race (2).
b. Install seal (1).
Illustration 2 g00911499
c. Turn main housing (3) over 180 degrees, as shown.
2/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. d. Install bearing (4).
2. Assemble motor housing (6), as follows:
Illustration 3 g00911506
a. Install the two backup rings and O-ring seal (7) in the motor housing.
Illustration 4 g00911509
b. Install bearing (8).
c. Use Tooling (A) to install Duo-cone seal kit (9).
3/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 5 g01041120
3. Place main housing (3) on motor housing (6).
4. Remove Tooling (B) and the suitable lifting device.
Illustration 6 g00913031
5. Use Tooling (D) to clean the threads that are on locknut (10).
6. Install locknut (10).
Illustration 7 g01041121
4/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. 7. Fasten Tooling (E) and a suitable lifting device to Tooling (F).
8. Lower Tooling (F) into the final drive. Make sure that the notches in locknut (10) are
aligned with the keys on Tooling (F). The weight of Tooling (F) is approximately 45 kg
(100 lb).
Illustration 8 g00914371
9. Place Tooling (G) onto Tooling (F).
10. Fasten a suitable lifting device to the upper half of Tooling (C) and install the upper half of
Tooling (C) to the lower half of Tooling (C). Pin the two halves together.
Illustration 9 g00914422
11. Attach Tooling (H) to the pressure reducing valve manifold, as shown.
12. Set the torque level for the bench to 4000 N·m (2950 lb ft). Do not exceed this pressure.
Reference: Refer to the Tool Operating Manual, NEHS0673 for setting the torque level.
5/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 10 g00914423
13. Place Tooling (I) through the bench and into Tooling (G).
Illustration 11 g00913894
14. Install locknut (10). Tighten locknut (10) to a torque of 4000 N·m (2950 lb ft).
15. Fasten a hoist to the upper half of Tooling (C).
16. Remove the upper half of Tooling (C).
6/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 12 g00913936
17. Install dowel pin (11) into locknut (10).
Note: Do not reuse the old holes for the dowel pins.
Illustration 13 g00904392
18. Rotate ring (12) for one notch until the ring locks in place.
Illustration 14 g00904394
7/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 15 g00904395
19. Install retaining ring (15).
20. Install gears (14).
21. Install retaining ring (13).
Illustration 16 g01041133
22. Install Tooling (B) and a suitable lifting device to planetary gear set (16). The weight of
planetary gear set (16) is approximately 36 kg (80 lb). Position the planetary gear set into
the housing.
8/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Illustration 17 g00904396
23. Install bolts (17).
Illustration 18 g06234329
Typical Example
24. Install gears (18). Install sun gear (18A) and the retaining ring.
9/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39) - ...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Illustration 19 g00904397
25. Install planetary gear set (19).
a. Install retaining ring (20).
Illustration 20 g06234330
26. Install gears (21). Install sun gear (21A) and the retaining ring.
Illustration 21 g00904411
a. Install retaining rings (24). Install planetary gear set (23). Install sun gear (22).
10/13
324D FM JKR00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4593 - 39)...
2020/8/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...