This document provides instructions for removing and installing the inlet manifold on a Caterpillar 321D LCR excavator with a C6.4 engine. The removal process involves detaching hoses, removing bolts and clips, and lifting the manifold off using a lifting device. For installation, the gasket and hoses are reattached, bolts are tightened, and clips are reinstalled. Safety notices are provided to keep parts clean and securely lift the manifold due to its weight.
Caterpillar cat 321 d lcr excavator (prefix nas) service repair manual (nas00...ufdjjsekkmdme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 321D LCR excavator with a C6.4 engine. The removal process involves detaching hoses, removing bolts and clips, and lifting the manifold off using a lifting device. For installation, the gasket and hoses are reattached, bolts are tightened to the specified torques, and the fuel manifold is reinstalled at the end. Separate sections provide similar instructions for removing and installing inlet and exhaust valves, and related components like valve springs. Safety notices are included throughout regarding keeping parts clean and ensuring components are properly secured.
Caterpillar cat 320 d l 320dl excavator (prefix a6f) service repair manual (a...ufjjsjekkmdme
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...ufjjsejfkskemme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
Caterpillar cat 311 d lrr excavator (prefix lka) service repair manual (lka00...fjsekdmmeed
This document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar C4.2 engine. It describes the required tools and gives step-by-step procedures for removing valve springs safely while ensuring the piston is at top dead center. Proper cleaning and inspection of parts is emphasized. The installation procedure describes compressing the springs, installing new seals, and ensuring correct valve depths are achieved. Safety notices warn of potential injury from compressed springs and ensure springs are replaced in pairs for each cylinder.
Caterpillar cat 314 d lcr excavator (prefix txn) service repair manual (txn00...fjskekdmjekm
The document provides instructions for removing and installing the inlet manifold and inlet and exhaust valves on a Caterpillar 314D LCR excavator. The procedures include using various tools to compress springs, remove bolts and clips, and correctly position gaskets and other components. Precautions are outlined to prevent damage and ensure parts are clean prior to installation. Diagrams illustrate the components and steps in the processes.
Caterpillar cat 314 e cr excavator (prefix ycw) service repair manual (ycw000...jfdskekdmme
This document provides instructions for removing and installing an engine oil cooler on a Caterpillar C4.4 engine. The removal procedure involves draining coolant, removing mounting bolts and spacers, and removing the oil cooler assembly. The installation procedure specifies cleaning parts and installing the oil cooler assembly with new gaskets and bolts. Tools, safety precautions, and maintenance tips are also provided.
1. The document provides instructions for removing and installing the inlet manifold on a Caterpillar 321D LCR EXCAVATOR powered by a C6.4 engine.
2. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket.
3. The installation procedure specifies cleaning and preparing surfaces, positioning a new gasket, attaching hoses and bolts, and torquing bolts to the specified values.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...udfdesd
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 321 d lcr excavator (prefix nas) service repair manual (nas00...ufdjjsekkmdme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 321D LCR excavator with a C6.4 engine. The removal process involves detaching hoses, removing bolts and clips, and lifting the manifold off using a lifting device. For installation, the gasket and hoses are reattached, bolts are tightened to the specified torques, and the fuel manifold is reinstalled at the end. Separate sections provide similar instructions for removing and installing inlet and exhaust valves, and related components like valve springs. Safety notices are included throughout regarding keeping parts clean and ensuring components are properly secured.
Caterpillar cat 320 d l 320dl excavator (prefix a6f) service repair manual (a...ufjjsjekkmdme
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...ufjjsejfkskemme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
Caterpillar cat 311 d lrr excavator (prefix lka) service repair manual (lka00...fjsekdmmeed
This document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar C4.2 engine. It describes the required tools and gives step-by-step procedures for removing valve springs safely while ensuring the piston is at top dead center. Proper cleaning and inspection of parts is emphasized. The installation procedure describes compressing the springs, installing new seals, and ensuring correct valve depths are achieved. Safety notices warn of potential injury from compressed springs and ensure springs are replaced in pairs for each cylinder.
Caterpillar cat 314 d lcr excavator (prefix txn) service repair manual (txn00...fjskekdmjekm
The document provides instructions for removing and installing the inlet manifold and inlet and exhaust valves on a Caterpillar 314D LCR excavator. The procedures include using various tools to compress springs, remove bolts and clips, and correctly position gaskets and other components. Precautions are outlined to prevent damage and ensure parts are clean prior to installation. Diagrams illustrate the components and steps in the processes.
Caterpillar cat 314 e cr excavator (prefix ycw) service repair manual (ycw000...jfdskekdmme
This document provides instructions for removing and installing an engine oil cooler on a Caterpillar C4.4 engine. The removal procedure involves draining coolant, removing mounting bolts and spacers, and removing the oil cooler assembly. The installation procedure specifies cleaning parts and installing the oil cooler assembly with new gaskets and bolts. Tools, safety precautions, and maintenance tips are also provided.
1. The document provides instructions for removing and installing the inlet manifold on a Caterpillar 321D LCR EXCAVATOR powered by a C6.4 engine.
2. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket.
3. The installation procedure specifies cleaning and preparing surfaces, positioning a new gasket, attaching hoses and bolts, and torquing bolts to the specified values.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...udfdesd
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d l 320dl excavator (prefix a6f) service repair manual (a...uudjfjjdkkksmm
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...ufdjjsekkmdme
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d l 320dl excavator (prefix a6f) service repair manual (a...fujsjfkskemm
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...fujsjfkkskefsme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, and reattaching hoses and bolts in the reverse order of removal. Tools including a link bracket are listed for both removal and installation.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...yfhjsjefkksemme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
Caterpillar cat 320 d l excavator (prefix mch) service repair manual (mch0000...fusejkskemfm
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...fujsekfkksmemxs
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C6.4 engine.
The removal procedure involves using various tools to compress the valve springs, remove the valve keepers and spring retainer, and lift the valves out of the cylinder head. The installation procedure outlines cleaning and preparing the valve guides and stems, and using a valve spring compressor tool to carefully replace the springs, retainers and keepers in the correct orientation. Safety notices are provided to avoid injury from the compressed springs.
Caterpillar cat 320 d l excavator (prefix mch) service repair manual (mch0000...fusjefjskekmem
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off the engine using lifting brackets.
2. Clean surfaces and install a new gasket before lowering the manifold back into place and reattaching hoses and clips.
3. Tighten all bolts to the specified torques and reinstall the fuel manifold to complete the job.
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off the engine using lifting brackets.
2. Clean surfaces and install a new gasket before lowering the manifold back into place and reattaching hoses and clips.
3. Tighten all bolts to the specified torques and reinstall the fuel manifold to complete the job.
Caterpillar Cat 320D L 320DL Excavator (Prefix A6F) Service Repair Manual (A6...jfkksemmdmd
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator with a C6.4 engine. The removal procedure involves using various tools to remove bolts, clips, and hoses to detach the inlet manifold. Proper lifting equipment is required due to the manifold's weight of approximately 29 kg. The installation procedure specifies cleaning components and installing new washers and bolts to reattach the inlet manifold using the same lifting equipment. Precautions are outlined to keep parts clean and torque bolts to the specified values.
Caterpillar Cat 320D L Excavator (Prefix A6F) Service Repair Manual Instant D...udjkskdmmd
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator with a C6.4 engine. The removal procedure involves using various tools to remove bolts, clips, and hoses to detach the inlet manifold. Proper lifting equipment is required due to the manifold's weight of approximately 29 kg. The installation procedure specifies cleaning components and installing new washers before reattaching hoses and bolts with the specified torques.
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off using a lifting tool.
2. Clean and position a new gasket before lowering the manifold back into place and reattaching hoses and bolts.
3. Reinstall any removed components like the air inlet heater and fuel manifold when complete.
Caterpillar Cat 320D and 320D L 320DL Excavator (Prefix A6F) Service Repair M...yan77xunhao
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off the engine using lifting brackets.
2. Clean surfaces and install a new gasket before lowering the manifold back into place and reattaching hoses and clips.
3. Tighten all bolts to the specified torques once the manifold is reinstalled.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...jjskefkskemik
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and safety equipment required for the job.
- Procedures for removing valves one at a time, which involves compressing the valve springs, removing retainers and seals, and identifying valves.
- Inspection criteria for valve and cylinder head components.
- Steps for cleaning and lubricating valves before reinstallation with new seals and springs.
Caterpillar cat 320 d l excavator (prefix mch) service repair manual (mch0000...jfkseksmemqw
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D excavator engine. The key steps are:
1. Remove bolts and clips to detach hoses and lift off the inlet manifold using lifting tools, as it weighs approximately 29 kg.
2. Clean and inspect gasket surfaces before installing the new gasket and inlet manifold. Attach lifting tools and position the manifold, then install bolts and clips.
3. Reattach hoses by installing new washers and bolts, and tighten bolts to the specified torques. Install the fuel manifold to complete the job.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...fjkskekemm
This document provides instructions for removing and installing the inlet manifold and inlet and exhaust valves on a Caterpillar C6.4 engine. The removal process involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. Installation is the reverse process, and includes replacing washers, tightening bolts to the specified torques, and ensuring all components are clean. Removing the valves requires compressing the springs using a special tool while the piston is at top dead center. Installation involves lubricating the stems, inserting new seals, and carefully compressing the springs into place.
New holland cs660 combine harvesters service repair manualudfdesd
This document is a repair manual for New Holland agricultural equipment models CS520, CS540, CS640, CS660, and CL560. It contains sections on the machines' distribution systems, power production, power train, travelling systems, body and structure, tool positioning, and crop processing. The sections contain chapters that provide technical data, functional descriptions, diagnostic information, and service procedures for the machines' components and systems. The manual uses a coding system to uniquely identify each piece of technical information and allow users to easily search for the specific data they need.
New holland c232 stage iv compact track loader service repair manual [nfm4021...udfdesd
The document is a service manual that provides maintenance and repair instructions for CNH Industrial 200 Series skid steer loaders and compact track loaders with Tier 4B and Stage IV engines. It contains sections on the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. The manual provides detailed procedures, part numbers, and diagrams for servicing and repairing components of the machines.
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j040...udfdesd
- The document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators.
- It describes removing over a dozen parts from the motor housing, including the rear housing, brushes, field windings, and pinion drive.
- Cleaning and inspecting instructions are provided to check parts for wear and damage before reassembling the motor.
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j019...udfdesd
This document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators. It describes the parts and tools needed and steps to disassemble components like the solenoid, rear housing, brushes, pinion drive housing, and field winding coil. Cleaning and inspection steps are included. Diagrams illustrate the motor components and disassembly/assembly process.
Caterpillar cat 428 c backhoe loader (prefix 8rn) service repair manual (8rn0...udfdesd
This document provides instructions for removing and installing fuel injection nozzles and fuel injection pumps on a Caterpillar 3054 engine. It describes the required tools and safety precautions. The procedures include removing fuel lines, loosening nuts and bolts, and using alignment pins to ensure proper timing when removing and installing components.
More Related Content
Similar to Caterpillar cat 321 d lcr excavator (prefix nas) service repair manual (nas00001 and up)
Caterpillar cat 320 d l 320dl excavator (prefix a6f) service repair manual (a...uudjfjjdkkksmm
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...ufdjjsekkmdme
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d l 320dl excavator (prefix a6f) service repair manual (a...fujsjfkskemm
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and parts required for the job, including a valve spring compressor and cylinder head repair stand.
- Steps to remove the cylinder head, mark valves for identification, compress springs with the tooling, and remove springs, retainers, seals and valves.
- Inspection criteria for valve and cylinder head components.
- Cleaning and lubrication requirements before installing new seals, valves, springs and retainers in reverse order of removal.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...fujsjfkkskefsme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, and reattaching hoses and bolts in the reverse order of removal. Tools including a link bracket are listed for both removal and installation.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...yfhjsjefkksemme
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
Caterpillar cat 320 d l excavator (prefix mch) service repair manual (mch0000...fusejkskemfm
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...fujsekfkksmemxs
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C6.4 engine.
The removal procedure involves using various tools to compress the valve springs, remove the valve keepers and spring retainer, and lift the valves out of the cylinder head. The installation procedure outlines cleaning and preparing the valve guides and stems, and using a valve spring compressor tool to carefully replace the springs, retainers and keepers in the correct orientation. Safety notices are provided to avoid injury from the compressed springs.
Caterpillar cat 320 d l excavator (prefix mch) service repair manual (mch0000...fusjefjskekmem
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator. The removal procedure involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. The installation procedure specifies cleaning components, positioning a new gasket, reattaching hoses and bolts, and torquing to the specified values. Tools, safety notices, and illustrations are included to aid the process.
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off the engine using lifting brackets.
2. Clean surfaces and install a new gasket before lowering the manifold back into place and reattaching hoses and clips.
3. Tighten all bolts to the specified torques and reinstall the fuel manifold to complete the job.
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off the engine using lifting brackets.
2. Clean surfaces and install a new gasket before lowering the manifold back into place and reattaching hoses and clips.
3. Tighten all bolts to the specified torques and reinstall the fuel manifold to complete the job.
Caterpillar Cat 320D L 320DL Excavator (Prefix A6F) Service Repair Manual (A6...jfkksemmdmd
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator with a C6.4 engine. The removal procedure involves using various tools to remove bolts, clips, and hoses to detach the inlet manifold. Proper lifting equipment is required due to the manifold's weight of approximately 29 kg. The installation procedure specifies cleaning components and installing new washers and bolts to reattach the inlet manifold using the same lifting equipment. Precautions are outlined to keep parts clean and torque bolts to the specified values.
Caterpillar Cat 320D L Excavator (Prefix A6F) Service Repair Manual Instant D...udjkskdmmd
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D and 320D L excavator with a C6.4 engine. The removal procedure involves using various tools to remove bolts, clips, and hoses to detach the inlet manifold. Proper lifting equipment is required due to the manifold's weight of approximately 29 kg. The installation procedure specifies cleaning components and installing new washers before reattaching hoses and bolts with the specified torques.
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off using a lifting tool.
2. Clean and position a new gasket before lowering the manifold back into place and reattaching hoses and bolts.
3. Reinstall any removed components like the air inlet heater and fuel manifold when complete.
Caterpillar Cat 320D and 320D L 320DL Excavator (Prefix A6F) Service Repair M...yan77xunhao
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 320D excavator engine. It consists of the following steps:
1. Remove bolts and clips to detach hoses and lift the manifold off the engine using lifting brackets.
2. Clean surfaces and install a new gasket before lowering the manifold back into place and reattaching hoses and clips.
3. Tighten all bolts to the specified torques once the manifold is reinstalled.
Caterpillar cat 320 d excavator (prefix a6f) service repair manual (a6f00001 ...jjskefkskemik
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320D excavator. It includes the following key details:
- Tools and safety equipment required for the job.
- Procedures for removing valves one at a time, which involves compressing the valve springs, removing retainers and seals, and identifying valves.
- Inspection criteria for valve and cylinder head components.
- Steps for cleaning and lubricating valves before reinstallation with new seals and springs.
Caterpillar cat 320 d l excavator (prefix mch) service repair manual (mch0000...jfkseksmemqw
This document provides instructions for removing and installing the inlet manifold on a Caterpillar 320D excavator engine. The key steps are:
1. Remove bolts and clips to detach hoses and lift off the inlet manifold using lifting tools, as it weighs approximately 29 kg.
2. Clean and inspect gasket surfaces before installing the new gasket and inlet manifold. Attach lifting tools and position the manifold, then install bolts and clips.
3. Reattach hoses by installing new washers and bolts, and tighten bolts to the specified torques. Install the fuel manifold to complete the job.
Caterpillar cat 320 d excavator (prefix mch) service repair manual (mch00001 ...fjkskekemm
This document provides instructions for removing and installing the inlet manifold and inlet and exhaust valves on a Caterpillar C6.4 engine. The removal process involves detaching hoses, removing bolts and clips, and lifting the manifold off using a link bracket. Installation is the reverse process, and includes replacing washers, tightening bolts to the specified torques, and ensuring all components are clean. Removing the valves requires compressing the springs using a special tool while the piston is at top dead center. Installation involves lubricating the stems, inserting new seals, and carefully compressing the springs into place.
Similar to Caterpillar cat 321 d lcr excavator (prefix nas) service repair manual (nas00001 and up) (17)
New holland cs660 combine harvesters service repair manualudfdesd
This document is a repair manual for New Holland agricultural equipment models CS520, CS540, CS640, CS660, and CL560. It contains sections on the machines' distribution systems, power production, power train, travelling systems, body and structure, tool positioning, and crop processing. The sections contain chapters that provide technical data, functional descriptions, diagnostic information, and service procedures for the machines' components and systems. The manual uses a coding system to uniquely identify each piece of technical information and allow users to easily search for the specific data they need.
New holland c232 stage iv compact track loader service repair manual [nfm4021...udfdesd
The document is a service manual that provides maintenance and repair instructions for CNH Industrial 200 Series skid steer loaders and compact track loaders with Tier 4B and Stage IV engines. It contains sections on the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. The manual provides detailed procedures, part numbers, and diagrams for servicing and repairing components of the machines.
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j040...udfdesd
- The document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators.
- It describes removing over a dozen parts from the motor housing, including the rear housing, brushes, field windings, and pinion drive.
- Cleaning and inspecting instructions are provided to check parts for wear and damage before reassembling the motor.
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j019...udfdesd
This document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators. It describes the parts and tools needed and steps to disassemble components like the solenoid, rear housing, brushes, pinion drive housing, and field winding coil. Cleaning and inspection steps are included. Diagrams illustrate the motor components and disassembly/assembly process.
Caterpillar cat 428 c backhoe loader (prefix 8rn) service repair manual (8rn0...udfdesd
This document provides instructions for removing and installing fuel injection nozzles and fuel injection pumps on a Caterpillar 3054 engine. It describes the required tools and safety precautions. The procedures include removing fuel lines, loosening nuts and bolts, and using alignment pins to ensure proper timing when removing and installing components.
Caterpillar cat 428 c backhoe loader (prefix 2cr) service repair manual (2cr1...udfdesd
This document provides instructions for removing a fuel transfer pump on a Caterpillar 3054 engine. It begins by noting the importance of cleanliness and containing fluids. The steps then describe:
1) Disconnecting the fuel supply and return lines from the pump
2) Removing two bolts to release the pump
3) Cleaning the pump mounting surfaces before installing a new pump
Caterpillar cat 428 c backhoe loader (prefix 2cr) service repair manual (2cr1...udfdesd
This document provides instructions for removing and installing the fuel injection pump on a Caterpillar 3054 engine. It includes:
1) A list of required tools for the job.
2) Steps to remove the fuel injection pump by loosening a locking spacer, removing bolts, and taking off the pump. Proper timing of holes is noted.
3) Steps to install the new fuel injection pump by checking the O-ring, lubricating it, mounting the pump in place, installing bolts while checking timing holes, and replacing other components.
Proper safety, handling of fluids, and ensuring correct cylinder position are emphasized.
Caterpillar cat 426 c backhoe loader (prefix 7wn) service repair manual (7wn0...udfdesd
This document provides instructions for servicing various components of a Caterpillar 426C BACKHOE LOADER, including removing and installing the steering cylinder, air conditioner compressor group, air conditioner filter, and full air conditioner system. Safety precautions are outlined, such as containing fluids, wearing protective equipment when working with refrigerants, and referring to additional manuals for purging and charging procedures. The procedures provide a list of removal and installation steps that include disconnecting hoses and lines, removing mounting bolts, and reversing the process for reinstallation.
Caterpillar cat 426 c backhoe loader (prefix 7wn) service repair manual (7wn0...udfdesd
The document provides instructions for removing and installing a fuel filter base on a Caterpillar 3054 engine. It begins by noting the importance of cleanliness and containing fluids. The removal procedure then lists the following steps:
1. Drain the fuel system and remove the fuel filter.
2. Remove the banjo bolt and fuel line from the filter base.
3. Remove the filter base mounting bolts and remove the filter base.
The installation procedure lists installing the filter base with new gaskets and tightening the bolts and fuel line to the specified torques.
Caterpillar cat 426 c backhoe loader (prefix 7wn) service repair manual (7wn0...udfdesd
The document provides instructions for removing and installing the rear axle group on a 426C backhoe loader. It describes removing the rear wheels and main drive shaft to start, then removing floor plates, hoses, bolts and wires to access the rear axle. A transmission jack is used to position under the rear axle so the mounting bolts can be removed and the axle lowered out from under the machine. Reinstallation follows the removal steps in reverse order.
Caterpillar cat 321 d lcr excavator (prefix txa) service repair manual (txa00...udfdesd
This document provides instructions for removing and installing fuel injection lines and other fuel system components on a Caterpillar 321D LCR excavator. The removal process involves disconnecting fuel lines, removing mounting hardware, and using protective tools and procedures to avoid contact with high pressure fuel. Installation is the reverse of removal, including replacing components, tightening fittings, and reconnecting fuel lines and hoses. Safety notices emphasize waiting for fuel pressure to release, plugging open lines, and proper fluid disposal.
Caterpillar cat 321 d lcr excavator (prefix pbd) service repair manual (pbd00...udfdesd
1. The document provides instructions for removing and installing fuel injection lines and other fuel system components on a Caterpillar 321D LCR excavator.
2. The removal procedure includes disconnecting fuel lines, removing mounting bolts, and using protective tools to prevent contamination of fuel system components.
3. Installation is the reverse of removal, and involves cleaning components, applying new seals and fittings, and reconnecting fuel lines according to torque specifications.
Caterpillar cat 321 d lcr excavator (prefix mpg) service repair manual (mpg00...udfdesd
1. The document provides instructions for removing and installing electronic unit injectors, turbochargers, and exhaust manifolds on a Caterpillar 321D LCR excavator.
2. The electronic unit injector removal procedure involves disconnecting harness assemblies, removing mounting bolts and washers, and using a pry bar to remove the injectors.
3. Turbocharger removal requires disconnecting tubes, hoses and removing mounting nuts, while installation applies anti-seize compound to nuts and tightens clamps.
Caterpillar cat 321 d lcr excavator (prefix mdt) service repair manual (mdt00...udfdesd
This document provides instructions for removing and installing the fuel injection pump, fuel injection pump gear, and electronic unit injectors on a Caterpillar C6.4 engine. The removal process involves draining fluids, loosening bolts, disconnecting hoses and wiring, and using tools to separate parts. Installation is the reverse order, taking care to clean parts and use new seals and fittings. Proper torque specifications are listed for all fasteners.
Caterpillar cat 321 d lcr excavator (prefix kbz) service repair manual (kbz00...udfdesd
The document provides instructions for removing and installing the boom on a 321D LCR excavator. Key steps include:
1. Draining hydraulic fluid and releasing system pressure before removal.
2. Removing attachment lines and mounting hardware to separate the boom.
3. Installing new bearings and seals before reattaching the boom using lifting equipment.
4. Measuring clearances and adding shims as needed to achieve the specified tolerance.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 321D LCR EXCAVATOR NAS
Configuration: 321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i02879378
Inlet Manifold - Remove and Install
SMCS - 1058-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Start By:
A. Remove the fuel manifold. Refer to Disassembly and Assembly, "Fuel Manifold (Rail) -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g01375420
1. Remove bolts (1) and remove clip (2) .
Illustration 2 g01375421
2. Remove bolt (4) . Disconnect hose assembly (3) and the washers. Discard the washers.
3. Remove bolt (6) . Disconnect hose assembly (5) and the washers. Discard the washers.
Illustration 3 g01375422
2/5321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Attach Tooling (A) and a suitable lifting device to inlet manifold (9) . The weight of inlet
manifold (9) is approximately 29 kg (65 lb).
5. Remove clip (7) and clip (8) .
6. Remove bolts (10) . Use Tooling (A) and the suitable lifting device in order to remove inlet
manifold (9) and the gasket.
7. If necessary, remove the air inlet heater. Refer to Disassembly and Assembly, "Air Inlet
Heater - Remove".
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the gaskets for wear or for damage. Replace the components, if necessary.
Illustration 4 g01375422
1. If necessary, install the air inlet heater. Refer to Disassembly and Assembly, "Air Inlet
Heater - Install".
3/5321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 2. Attach Tooling (A) and a suitable lifting device to inlet manifold (9) . The weight of inlet
manifold (9) is approximately 29 kg (65 lb). Position the gasket. Use Tooling (A) and the
suitable lifting device in order to position inlet manifold (9) to the engine. Install bolts (10) .
Tighten bolts (10) to a torque of 18 ± 2 N·m (13 ± 1 lb ft).
3. Install clips (8) and (7) .
Illustration 5 g01375421
4. Install new washers and connect hose assembly (5) . Install bolt (6) . Tighten bolt (6) to a
torque of 34 ± 4 N·m (25 ± 3 lb ft).
5. Install new washers and connect hose assembly (3) . Install bolt (4) . Tighten bolt (4) to a
torque of 34 ± 4 N·m (25 ± 3 lb ft).
Illustration 6 g01375420
6. Install clip (2) and install bolts (1) .
End By: Install the fuel manifold. Refer to Disassembly and Assembly, "Fuel Manifold (Rail) -
Install".
Wed Oct 9 22:35:26 UTC+0800 2019
4/5321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 321D LCR EXCAVATOR NAS
Configuration: 321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i02747674
Inlet and Exhaust Valve Springs - Remove and Install
SMCS - 1108-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1
B 9U-6198 Crankshaft Turning Tool 1
Start By:
a. Remove the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and
Pushrod - Remove".
b. Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve
Mechanism Cover Base - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: The following procedure should be adopted in order to remove the valve springs when the
cylinder head is installed to the engine.
1/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Note: Ensure that the appropriate piston is at top dead center before the valve spring is removed.
Failure to ensure that the piston is at top dead center may allow the valve to drop into the cylinder
bore.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
NOTICE
Plug the apertures for the push rods in the cylinder head in order to
prevent the entry of loose parts into the engine.
Illustration 1 g01376301
2/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 2 g01376302
NOTICE
Ensure that the valve spring is compressed squarely or damage to the
valve stem may occur.
1. Install Tooling (A) into position on the cylinder head in order to compress a valve spring (4)
for the appropriate piston.
2. Use Tooling (A) in order to compress valve spring (4) and open valve (1) slightly.
Note: Do not compress valve spring (4) so that valve spring retainer (3) touches valve stem
seal (5).
3. Use Tooling (B) in order to rotate the crankshaft carefully, until the piston touches the
valve.
Note: Do not use excessive force to turn the crankshaft. The use of force can result in bent
valve stems.
4. Continue to rotate the crankshaft and gradually release the pressure on Tooling (A) until the
piston is at the top dead center position. The valve is now held in a position that allows
valve spring (4) to be safely removed.
Note: Valve springs must be replaced in pairs for the inlet valve or the exhaust valve of
each cylinder. If all valve springs require replacement the procedure can be carried out on
two cylinders at the same time. The procedure can be carried out on the following pairs of
cylinders. 1 with 6, 2 with 5 and 3 with 4. Ensure that all of the valve springs are installed
before changing from one pair of cylinders to another pair of cylinders.
3/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. NOTICE
Do not turn the crankshaft while the valve springs are removed.
5. Apply sufficient pressure to Tooling (A) in order to allow removal of valve keepers (2).
Note: Do not compress valve spring (4) so that valve spring retainer (3) touches valve stem
seal (5).
Remove valve keepers (2).
6. Slowly release the pressure on Tooling (A).
7. Remove valve spring retainer (3) and remove valve spring (4).
8. If necessary, remove valve stem seals (5).
9. Remove Tooling (A).
Note: The installation of each set of valve springs (4) must be completed before attempting to
remove the next set of valve springs (4).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
4/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 3 g01376913
Illustration 4 g01376302
1. The outer face of the valve guides must be clean and dry before installing the valve stem
seal (5). Install new valve stem seal (5) onto the valve guide.
2. Install valve spring (4) onto the cylinder head. Position valve spring retainer (3) on valve
spring (4).
3. Install Tooling (A) in the appropriate position on the cylinder head in order to compress
valve spring (4).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
5/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 4. Apply sufficient pressure to Tooling (A) in order to install valve keepers (2). Do not
compress valve spring (4) so that valve spring retainer (3) touches valve stem seal (5).
5. Carefully release the pressure on Tooling (A).
End By:
a. Install the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve
Mechanism Cover Base - Remove and Install".
b. Install the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and
Pushrod - Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Oct 9 22:36:22 UTC+0800 2019
6/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 321D LCR EXCAVATOR NAS
Configuration: 321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i06051426
Inlet and Exhaust Valves - Remove and Install
SMCS - 1105-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-6691 Cylinder Head Repair Stand 1
B 9U-6195 Valve Spring Compressor Gp 1
C 5P-1720 Seal Pick 1
Start By:
a. Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Note the location and orientation of all components for assembly purposes.
1. Clean the bottom face of the cylinder head. Check the depth of the valves below the face of
the cylinder head before the valve springs are removed. Refer to Specifications, "Cylinder
Head Valves" for the correct dimensions.
1/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 2. Place a temporary identification mark on the heads of the valves in order to identify the
correct position.
Illustration 1 g01376164
3. Use a suitable lifting device in order to position cylinder head (1) onto Tooling (A) with the
valve springs upward. The weight of cylinder head (1) is approximately 113 kg (250 lb).
Note: Ensure that cylinder head (1) is kept on a clean, soft surface in order to prevent
damage to the machined face.
Illustration 2 g01376174
2/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g01376184
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Install Tooling (B) on cylinder head (1) in order to compress valve spring (5).
NOTICE
Ensure that the valve spring is compressed squarely or damage to the
valve stem may occur.
5. Apply sufficient pressure to Tooling (B) in order to remove valve keepers (3). Do not
compress the spring so that valve spring retainer (4) touches valve stem seal (6).
6. Slowly release the pressure on Tooling (B).
7. Remove valve spring retainer (4). Remove valve spring (5). Remove valve (2).
8. Use Tooling (C) in order to remove valve stem seal (6).
3/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 9. Repeat Steps 4 through 7 for the remaining valves.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 8S-6691 Cylinder Head Repair Stand 1
B 9U-6195 Valve Spring Compressor Gp 1
D 312-8755 Valve Stem Seal Installer 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Clean all components of the cylinder head assembly. Ensure that all ports, all coolant
passages, and all lubrication passages in the cylinder head are free from debris. Follow
Steps 1.a through 1.d in order to inspect the components of the cylinder head assembly.
Replace any components that are worn or damaged.
a. Inspect the cylinder head for wear and for damage. Refer to Testing and Adjusting,
"Cylinder Head Inspect".
b. Inspect the valve seats for wear and for damage. Refer to Specifications, "Cylinder
Head Valves" for further information.
c. Inspect the valve guides for wear and for damage. Refer to Specifications, "Cylinder
Head Valves" and Testing and Adjusting, "Valve Guide - Inspect" for further
information.
d. Inspect the valves for wear and for damage. Refer to Specifications, "Cylinder Head
Valves ".
e. Inspect valve springs (5) for damage and for the correct length. Refer to
Specifications, "Cylinder Head Valves ".
4/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 4 g01376184
Illustration 5 g01376926
2. Lubricate the stem of valve (2) with clean engine oil. Install valve (2) in the appropriate
position in the cylinder head.
3. The outer face of the valve guides must be clean and dry before installing the valve stem
seal (6). Use Tooling (C) in order to install new valve stem seal (6) onto the valve guide.
4. Install valve spring (5) onto the cylinder head. Position valve spring retainer (4) on valve
spring (5).
5. Install Tooling (B) in the appropriate position on cylinder head (1) in order to compress
valve spring (5).
Improper assembly of parts that are spring loaded can cause bodily
injury.
5/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
6. Apply sufficient pressure to Tooling (B) in order to install valve keepers (3). Do not
compress spring (5) so that valve spring retainer (4) touches valve stem seal (6).
7. Carefully release the pressure on Tooling (B).
8. Repeat Steps 2 through 7 for the remaining valves.
End By:
a. Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Oct 9 22:37:17 UTC+0800 2019
6/6321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 321D LCR EXCAVATOR NAS
Configuration: 321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i04625003
Inlet and Exhaust Valve Guides - Remove and Install
SMCS - 1104-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 384-8861 Valve Guide Remover 1
B 138-7573 Link Bracket 4
C 1U-9200 Lever Puller Hoist 1
D 8S-6691 Cylinder Head Repair Stand 1
Start By:
A. Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
B. Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit
Injector - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Note: Refer to Special Instructions, SMHS7953-00, "Use of Valve Seat Insert Puller Group" to
aid with the removal of the inlet and exhaust valve seats.
Illustration 1 g01377064
1. Attach Tooling (B) , Tooling (C) , and a suitable lifting device to cylinder head (1) . Use
Tooling (B) , Tooling (C) , and the suitable lifting device in order to turn over cylinder head
(1) by 180° onto Tooling (D) .
2/4321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 2 g01377121
2. Use Tooling (A) in order to remove valve guides (2) (not shown).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
E 384-8862 Valve Guide Installer 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
3/4321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 3 g01377130
1. Lubricate the outside of valve guides (2) (not shown) with clean engine oil.
2. Use Tooling (E) in order to install new valve guides (2) . Install valve guide (2) so that
valve guide (2) protrudes 16.000 mm (0.6299 inch) above Surface (X) of cylinder head (1) .
End By:
a. Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit
Injector - Install".
b. Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust
Valves - Remove and Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Oct 9 22:38:13 UTC+0800 2019
4/4321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 321D LCR EXCAVATOR NAS
Configuration: 321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i04625001
Inlet and Exhaust Valve Seat Inserts - Remove and Install
SMCS - 1103-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
166-7441 Valve Seat Extractor Tool 1
6V-4194 Valve Seat Extractor (1)
1
6V-4196 Valve Seat Extractor (1)
1
B 138-7573 Link Bracket 4
C 1U-9200 Lever Puller Hoist 1
D 8S-6691 Cylinder Head Repair Stand 1
( 1 )
Component of the Valve Seat Extractor Tool Group.
Start By:
A. Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and
Exhaust Valves - Remove and Install".
B. Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit
Injectors - Remove".
NOTICE
Keep all parts clean from contaminants.
1/5321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Contaminants may cause rapid wear and shortened component life.
Note: Refer to Special Instructions, SMHS7953-00, "Use of Valve Seat Insert Puller Group" to
aid with the removal of the inlet and exhaust valve seats.
Illustration 1 g01377064
1. Attach Tooling (B ) , Tooling (C) , and a suitable lifting device to cylinder head (1) . Use
Tooling (B ) , Tooling (C) , and the suitable lifting device in order to turn over cylinder head
(1) by 180° onto Tooling (D) .
2/5321D LCR Excavator NAS00001-UP (MACHINE) POWERED BY C6.4 Engine(SEB...
2019/10/9https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...