This document provides instructions for removing and installing various engine components on a Caterpillar 242D Skid Steer Loader including:
1) The flywheel housing which requires removing bolts and installing lifting tools.
2) The crankshaft pulley which is removed using a tool to prevent rotation and installing with specified torque.
3) The crankshaft front seal which is pried out and installed using a driver and sealant.
It provides diagrams and specifies tools and torque values for each procedure. Cautions are included to keep parts clean and contain fluids.
Caterpillar cat 232 b skid steer loader (prefix sch) service repair manual (s...ufjjskekkmde
The document provides instructions for installing an engine in Caterpillar 232B Skid Steer Loader. It involves using various tools to lift and position the engine, then connecting hoses, brackets, wiring harnesses and other components. Thirteen steps are outlined detailing how to install the pump, filter group, brackets and guards. The instructions conclude by specifying tilting the cab and reinstalling the air cleaner and muffler.
Caterpillar cat 321 d lcr excavator (prefix mdt) service repair manual (mdt00...ufdjjsekkmdme
This document provides instructions for removing and installing the fuel injection pump, fuel injection pump gear, and electronic unit injectors on a Caterpillar C6.4 engine. The removal process involves draining fluids, loosening bolts, disconnecting hoses and electrical connections. Installation is the reverse order, ensuring cleanliness and applying specified torques. Identification marks should be made for reinstallation of parts in the original locations.
Caterpillar cat 322 c fm excavator (prefix c3r) service repair manual (c3r000...jfjskeksemmme
This document provides instructions for removing and installing a unit injector hydraulic pump on a 322C FM EXCAVATOR with a 3126B engine. The removal process involves disconnecting hoses and lines, removing bolts, and taking off the pump. Installation is the reverse of removal, and includes reconnecting hoses, bolts, and ensuring a tight seal. Proper cleaning and inspection of parts is emphasized. A separate section provides multi-step instructions for disassembling and assembling a turbocharger from the same excavator model.
Caterpillar cat 322 c l hydraulic excavator (prefix emr) service repair manua...yhfhjjkdksmme
The document provides instructions for removing and installing various engine components on a Caterpillar 322C L and 322C LN hydraulic excavator. It describes:
1. Removing the crankshaft vibration damper, pulley, and belt.
2. Removing the crankshaft front seal by drilling holes in it and pulling it out with a slide hammer tool.
3. Removing the front cover and housing by removing mounting bolts.
This document provides instructions for removing and installing fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel transfer pump, and various fuel lines. Detailed step-by-step removal and installation procedures are provided along with required tools and torque specifications.
- Best practices are outlined for properly installing non-metallic fuel lines, including using the correct hose length and routing, avoiding twists or kinks, and ensuring proper alignment of clips and grommets. Fuel lines should be inspected every 500 hours.
- Illustrations clearly show the components and proper alignment to allow sufficient clearance from other parts. Proper installation creates gentle bends that
The document provides instructions for removing and installing a turbocharger and fuel injection pump gear on a Caterpillar 320D2 excavator. The removal steps include disconnecting hoses, removing bolts and tubes, and taking out the turbocharger. The installation involves cleaning parts, installing new seals, placing the gear on the pump shaft, locking the pump, and reconnecting all tubes and hoses. The process is completed by lubricating the gears.
Caterpillar cat 320 d excavator (prefix jpd) service repair manual (jpd00001 ...udfujjsejkkem
The document provides instructions for removing and installing various engine components of a Caterpillar 320D excavator powered by a C6.4 engine. The steps include removing the fuel injection pump gear by taking out the nut and using a puller tool. Electronic unit injectors are removed by disconnecting harness assemblies, removing bolts, and using a pry bar. The turbocharger removal procedure involves loosening clamps and removing nuts and connecting tubes and hoses.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ufjjjskkmsmed
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components, and installing parts in the reverse order of removal while following safety precautions. Torque specifications and required tools are provided where needed.
Caterpillar cat 232 b skid steer loader (prefix sch) service repair manual (s...ufjjskekkmde
The document provides instructions for installing an engine in Caterpillar 232B Skid Steer Loader. It involves using various tools to lift and position the engine, then connecting hoses, brackets, wiring harnesses and other components. Thirteen steps are outlined detailing how to install the pump, filter group, brackets and guards. The instructions conclude by specifying tilting the cab and reinstalling the air cleaner and muffler.
Caterpillar cat 321 d lcr excavator (prefix mdt) service repair manual (mdt00...ufdjjsekkmdme
This document provides instructions for removing and installing the fuel injection pump, fuel injection pump gear, and electronic unit injectors on a Caterpillar C6.4 engine. The removal process involves draining fluids, loosening bolts, disconnecting hoses and electrical connections. Installation is the reverse order, ensuring cleanliness and applying specified torques. Identification marks should be made for reinstallation of parts in the original locations.
Caterpillar cat 322 c fm excavator (prefix c3r) service repair manual (c3r000...jfjskeksemmme
This document provides instructions for removing and installing a unit injector hydraulic pump on a 322C FM EXCAVATOR with a 3126B engine. The removal process involves disconnecting hoses and lines, removing bolts, and taking off the pump. Installation is the reverse of removal, and includes reconnecting hoses, bolts, and ensuring a tight seal. Proper cleaning and inspection of parts is emphasized. A separate section provides multi-step instructions for disassembling and assembling a turbocharger from the same excavator model.
Caterpillar cat 322 c l hydraulic excavator (prefix emr) service repair manua...yhfhjjkdksmme
The document provides instructions for removing and installing various engine components on a Caterpillar 322C L and 322C LN hydraulic excavator. It describes:
1. Removing the crankshaft vibration damper, pulley, and belt.
2. Removing the crankshaft front seal by drilling holes in it and pulling it out with a slide hammer tool.
3. Removing the front cover and housing by removing mounting bolts.
This document provides instructions for removing and installing fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel transfer pump, and various fuel lines. Detailed step-by-step removal and installation procedures are provided along with required tools and torque specifications.
- Best practices are outlined for properly installing non-metallic fuel lines, including using the correct hose length and routing, avoiding twists or kinks, and ensuring proper alignment of clips and grommets. Fuel lines should be inspected every 500 hours.
- Illustrations clearly show the components and proper alignment to allow sufficient clearance from other parts. Proper installation creates gentle bends that
The document provides instructions for removing and installing a turbocharger and fuel injection pump gear on a Caterpillar 320D2 excavator. The removal steps include disconnecting hoses, removing bolts and tubes, and taking out the turbocharger. The installation involves cleaning parts, installing new seals, placing the gear on the pump shaft, locking the pump, and reconnecting all tubes and hoses. The process is completed by lubricating the gears.
Caterpillar cat 320 d excavator (prefix jpd) service repair manual (jpd00001 ...udfujjsejkkem
The document provides instructions for removing and installing various engine components of a Caterpillar 320D excavator powered by a C6.4 engine. The steps include removing the fuel injection pump gear by taking out the nut and using a puller tool. Electronic unit injectors are removed by disconnecting harness assemblies, removing bolts, and using a pry bar. The turbocharger removal procedure involves loosening clamps and removing nuts and connecting tubes and hoses.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ufjjjskkmsmed
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components, and installing parts in the reverse order of removal while following safety precautions. Torque specifications and required tools are provided where needed.
This document provides instructions for servicing components of a Caterpillar 242D Skid Steer Loader engine. It includes procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, valve mechanism cover, and replacing a bridge dowel. The document emphasizes cleaning parts and applying the correct torques during installation. Safety notices advise containing fluids and disposing of them properly. Illustrations show the components and tools needed for each procedure.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader. It describes removing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and idler gear. The procedures note required tools and torque specifications. Safety notices recommend keeping parts clean, containing fluids, and disposing of fluids properly.
This document provides instructions for servicing components of a Caterpillar 242D Skid Steer Loader engine. It includes procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, valve mechanism cover, and replacing a bridge dowel. The document emphasizes cleaning parts and applying the correct torques during installation. Safety notices advise containing fluids and disposing of them properly. Illustrations show the components and tools needed for each procedure.
This document provides instructions for servicing components of a Caterpillar 242D Skid Steer Loader engine. It includes procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, valve mechanism cover, and replacing a bridge dowel. The document emphasizes cleaning parts and applying the correct torques during installation. Safety notices advise containing fluids and disposing of them properly. Illustrations show the components and tools needed for each procedure.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are also provided about cleaning parts and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader with a C2.6 or C3.3B engine, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Alignment of timing marks on gears.
- Removing and installing the oil cooler front housing.
The procedures provide detailed steps and illustrations for each component. Cautions are included to keep parts clean and contain fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are included about keeping parts clean and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are also provided about cleaning parts and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are included about keeping parts clean and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are included about keeping parts clean and containing fluids.
Caterpillar cat 232 b skid steer loader (prefix sch) service repair manual (s...ufjjdkskemmd
The document provides instructions for installing an engine in Caterpillar 232B Skid Steer Loader. It involves using various tools to lift and position the engine, then connecting hoses, brackets, wiring harnesses and other components. Thirteen steps are outlined detailing how to install the pump, filter group, brackets and connect all necessary lines and wiring. The instructions conclude by mentioning tilting the cab, installing the air cleaner and muffler.
Caterpillar cat 232 b skid steer loader (prefix sch) service repair manual (s...fujsjfkkskefsme
This document provides instructions for installing and removing an engine in a Caterpillar 232B skid steer loader. It involves the following steps:
1. Use lifting tools to attach the 254kg engine and position it in the machine. Install bolts and connect harnesses.
2. Install other components like the pump, filter group, brackets and hoses while connecting wiring harnesses.
3. Fill the engine with coolant and reinstall parts like the cab, air cleaner and muffler.
The document provides instructions for removing and installing a flywheel on a Caterpillar C3.3B engine. It lists the required tools which include guide studs and a link bracket. The removal procedure involves removing bolts from the flywheel, installing guide studs into the crankshaft, and using a lifting device to remove the flywheel. Instructions are given to inspect the flywheel and ring gear for wear or damage and replace any worn or damaged components. The installation procedure involves reversing the removal steps.
Yanmar vi o55 5 excavator service repair manualfjsjkseikdmme
This chapter outlines general cautions and guidelines for maintenance work on hydraulic equipment. It discusses the importance of correct work procedures, safety precautions, preparations, cautions for disassembly and reassembly, removal and installation of hydraulic equipment and piping, handling of seals, installation of hydraulic hoses, specifications of hydraulic hoses, and air release of hydraulic equipment. Adhering to these procedures and standards is important for safely and properly conducting maintenance and repair work.
Massey ferguson mf 3690 tractor service parts catalogue manual (part number ...fjsjkseikdmme
This document provides part numbers and descriptions for engine components of a Massey Ferguson 3690 tractor. It is divided into sections for the engine under different serial number ranges. The sections list parts such as the cylinder block, liners, valves, crankshaft, pistons, and other internal engine parts.
More Related Content
Similar to Caterpillar cat 242 d skid steer loader (prefix a9w) service repair manual (a9w00001 and up)
This document provides instructions for servicing components of a Caterpillar 242D Skid Steer Loader engine. It includes procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, valve mechanism cover, and replacing a bridge dowel. The document emphasizes cleaning parts and applying the correct torques during installation. Safety notices advise containing fluids and disposing of them properly. Illustrations show the components and tools needed for each procedure.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader. It describes removing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and idler gear. The procedures note required tools and torque specifications. Safety notices recommend keeping parts clean, containing fluids, and disposing of fluids properly.
This document provides instructions for servicing components of a Caterpillar 242D Skid Steer Loader engine. It includes procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, valve mechanism cover, and replacing a bridge dowel. The document emphasizes cleaning parts and applying the correct torques during installation. Safety notices advise containing fluids and disposing of them properly. Illustrations show the components and tools needed for each procedure.
This document provides instructions for servicing components of a Caterpillar 242D Skid Steer Loader engine. It includes procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, valve mechanism cover, and replacing a bridge dowel. The document emphasizes cleaning parts and applying the correct torques during installation. Safety notices advise containing fluids and disposing of them properly. Illustrations show the components and tools needed for each procedure.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are also provided about cleaning parts and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader with a C2.6 or C3.3B engine, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Alignment of timing marks on gears.
- Removing and installing the oil cooler front housing.
The procedures provide detailed steps and illustrations for each component. Cautions are included to keep parts clean and contain fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are included about keeping parts clean and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are also provided about cleaning parts and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are included about keeping parts clean and containing fluids.
This document provides instructions for servicing components of a 242D Skid Steer Loader engine. It includes procedures for removing and installing various parts like the flywheel housing, crankshaft pulley, crankshaft front seal, oil cooler, and valve mechanism cover. Detailed steps are outlined along with required tools and torque specifications. Technicians are advised to keep parts clean, contain fluids, and follow specifications for non-specified torque values.
This document provides instructions for removing and installing various engine components on a 242D Skid Steer Loader, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing and installing the crankshaft front seal.
- Aligning the timing marks on gears.
- Removing and installing the idler gear and bearing.
- Draining coolant and removing the oil cooler front housing.
The procedures provide illustrations and specify tools needed and torque specifications for reinstallation. Cautions are included about keeping parts clean and containing fluids.
Caterpillar cat 232 b skid steer loader (prefix sch) service repair manual (s...ufjjdkskemmd
The document provides instructions for installing an engine in Caterpillar 232B Skid Steer Loader. It involves using various tools to lift and position the engine, then connecting hoses, brackets, wiring harnesses and other components. Thirteen steps are outlined detailing how to install the pump, filter group, brackets and connect all necessary lines and wiring. The instructions conclude by mentioning tilting the cab, installing the air cleaner and muffler.
Caterpillar cat 232 b skid steer loader (prefix sch) service repair manual (s...fujsjfkkskefsme
This document provides instructions for installing and removing an engine in a Caterpillar 232B skid steer loader. It involves the following steps:
1. Use lifting tools to attach the 254kg engine and position it in the machine. Install bolts and connect harnesses.
2. Install other components like the pump, filter group, brackets and hoses while connecting wiring harnesses.
3. Fill the engine with coolant and reinstall parts like the cab, air cleaner and muffler.
The document provides instructions for removing and installing a flywheel on a Caterpillar C3.3B engine. It lists the required tools which include guide studs and a link bracket. The removal procedure involves removing bolts from the flywheel, installing guide studs into the crankshaft, and using a lifting device to remove the flywheel. Instructions are given to inspect the flywheel and ring gear for wear or damage and replace any worn or damaged components. The installation procedure involves reversing the removal steps.
Similar to Caterpillar cat 242 d skid steer loader (prefix a9w) service repair manual (a9w00001 and up) (20)
Yanmar vi o55 5 excavator service repair manualfjsjkseikdmme
This chapter outlines general cautions and guidelines for maintenance work on hydraulic equipment. It discusses the importance of correct work procedures, safety precautions, preparations, cautions for disassembly and reassembly, removal and installation of hydraulic equipment and piping, handling of seals, installation of hydraulic hoses, specifications of hydraulic hoses, and air release of hydraulic equipment. Adhering to these procedures and standards is important for safely and properly conducting maintenance and repair work.
Massey ferguson mf 3690 tractor service parts catalogue manual (part number ...fjsjkseikdmme
This document provides part numbers and descriptions for engine components of a Massey Ferguson 3690 tractor. It is divided into sections for the engine under different serial number ranges. The sections list parts such as the cylinder block, liners, valves, crankshaft, pistons, and other internal engine parts.
Massey ferguson mf 3680 tractor service parts catalogue manual (part number ...fjsjkseikdmme
This document provides parts information for an MF 3680 tractor. It includes lists of parts for the engine, cylinder block, and timing gear housing. The parts lists include part numbers, quantities, descriptions, and notes on application based on serial number ranges.
Massey ferguson mf 3610 tractor service parts catalogue manual (part number ...fjsjkseikdmme
This document provides a parts list for an MF 3610 tractor engine. It includes 3 pages of detailed parts listings with part numbers, quantities, descriptions and comments for various engine systems including the engine, cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. There are a total of 51 individual parts listed for the rocker shaft alone. Special fits or replacement parts are noted with many of the listings.
Massey ferguson mf 3115 tractor service parts catalogue manual (part number ...fjsjkseikdmme
This document provides part numbers and descriptions for components of a Massey Ferguson 3115 tractor engine. It includes sections for the engine, heater-engine block, fan drive section, alternator positioner, and cylinder block. Each section lists the relevant part numbers, quantities, descriptions, and any comments for repair or replacement parts. The document contains detailed technical specifications for tractor engine components.
Massey ferguson 2605 tractor service parts catalogue manual (part number 390...fjsjkseikdmme
The document provides a table of contents and specifications for a Massey Ferguson 2605 tractor made in India for markets in the USA, Canada, South America, and Australia. The table lists 46 pages covering various systems of the tractor like the engine and fuel system, frame and suspension, steering, drivetrain, electrical system, and others. Sample pages from the engine section provide part numbers, descriptions and other technical details for components like the engine, cylinder block, crankshaft, pistons, cylinder head and more.
Massey ferguson 2235 tractor service parts catalogue manualfjsjkseikdmme
This document provides parts information for the engine of a Massey Ferguson 2235 tractor. It includes lists of parts for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, and cylinder head. Each item lists the part number, quantity, description, and indicates whether it is a component of another assembly. Footnotes provide additional details on some part applications and specifications.
Massey ferguson 2230 tractor service parts catalogue manualfjsjkseikdmme
This document contains parts lists and diagrams for the engine of a Massey Ferguson 2230 tractor. It lists over 50 individual engine part numbers, descriptions, and quantities. The parts include cylinders, pistons, connecting rods, crankshafts, cylinder heads, and other internal combustion engine components. Footnotes provide additional details on some of the part numbers and locations.
Massey ferguson 2225 tractor service parts catalogue manualfjsjkseikdmme
This document provides parts information for repairing the engine on a Massey Ferguson 2225 tractor. It includes lists of parts needed for the engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, cylinder head, and rocker shaft. Each item lists the part number, quantity needed, description, and indicates if it is a component of another assembly. Footnotes provide additional information on some parts.
John deere xuv550 xuv gator service repair manual (tm109819)fjsjkseikdmme
This document provides safety information and instructions for working on XUV550, XUV550 S4, XUV560, and XUV560 S4 XUV Gator Utility Vehicles. It identifies safety symbols and signal words, emphasizes reading all safety messages, keeping the work area clean and dry, using proper tools, handling fluids safely, and properly parking and preparing the machine for maintenance. The summary advises technicians to read all safety information, practice safe maintenance procedures, and always remove the key and disconnect the battery before working on the vehicle.
Deutz fahr serie 1000 3 cylinders euro 2 engine service repair manualfjsjkseikdmme
This document provides instructions for disassembling and assembling Deutz-Fahr Series 1000/3-4-6 cylinder engines. It includes sections on removing components like the cylinder heads, camshaft, crankshaft, pistons and connecting rods. There are also sections on inspecting and testing individual parts, including specifications and dimensions. The document also covers adjusting components upon assembly, such as valve clearances, timing of the injection pumps, and calibrating governors.
Deutz fahr agrotron k90 profiline tractor parts catalogue manualfjsjkseikdmme
This document provides part numbers and renewal times for components related to the crankcase, oil pan, flywheel, counterweights, V-grooved pulley, and crankshaft for Agrotron K 90, K 100, K 110, and K 120 Profiline tractor models. It includes part numbers for crankcases, bolts, plugs, gaskets, sleeves, shafts, seals, and other components. Renewal times are provided in days or hours and note when shorter codes may apply to reduce the time. Safety/lock agents and quantities are also specified for various assembly procedures.
Deutz fahr agrotron 120 mk3 tractor service repair manualfjsjkseikdmme
This workshop manual provides instructions for repair technicians on the Agrotron 106 MK3, 110 MK3, 115 MK3, 120 MK3, 135 MK3, 150 MK3, and 165 MK3 tractors. It aims to guide technicians on safe and proper repair methods, fault diagnosis, and inspection procedures. The manual is reserved for authorized dealers and service centers, and technicians should not share its contents without permission.
Deutz fahr agrotron 100 mk3 tractor service repair manualfjsjkseikdmme
This document is a workshop manual that provides instructions for repair technicians on repairing various Agrotron tractor models. It aims to enable technicians to properly diagnose issues, work safely, and perform accurate repairs. The manual contains technical information reserved for authorized dealers and service centers, and technicians are forbidden from sharing its contents without permission.
Deutz fahr agrokid 40 tractor parts catalogue manual (sn 1001 and up)fjsjkseikdmme
The document provides standard renewal times for various parts of Agrokid 30, 40, and 50 tractor models. Times are given in days or hours for components like the cylinder head, camshaft, crankcase, and cylinder head cover. For example, the renewal time for an engine head is listed as 9.5 days, made up of 9 days plus 0.5 days for a specified code. Other parts like valves, guides, and gaskets also have set renewal times provided.
Deutz fahr agrocompact 70 f3 tractor service repair manualfjsjkseikdmme
The workshop manual provides maintenance and repair instructions for tractors in the Agrocompact range, including the F60, 70F3, 70F4, F80, and F90 models. It details specifications, part replacements, inspection and adjustment procedures for the engine, transmission, axles, brakes, hydraulics, controls, bodywork, and electrical and auxiliary systems. The manual is intended to assist experienced mechanics in servicing tractors to ensure precise and qualified work.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 242D SKID STEER LOADER A9W
Configuration: 242D Skid Steer Loader A9W00001-UP (MACHINE)
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242551
Flywheel Housing - Remove and Install
SMCS - 1157-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Stud
M12 x 1.25 by 100 mm
2
B 138-7575 Link Brackets 2
Start By:
a. Remove the flywheel.
b. Remove the rear crankshaft seal.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g02794824
1. Remove two bolts (3) from flywheel housing (1).
2. Install Tooling (A) into flywheel housing (1).
3. Install Tooling (B). Install a suitable lifting device to flywheel housing (1). The weight of
flywheel housing (1) is approximately 25 kg (55 lb).
4. Remove remaining six bolts (3) and 8 bolts (2) from flywheel housing (1).
5. Remove flywheel housing (1) from the cylinder block.
Illustration 2 g02794825
6. Remove bearing (4).
7. Remove the gasket (5).
8. If necessary, remove the dowels from the cylinder block.
Installation Procedure
1. Install flywheel housing (1) in the reverse order of removal.
2/3242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g02863884
a. Install liquid gasket to the seam between the lower crankcase section (7) and the
upper crankcase section (6).
b. For the C3.3B tighten 8 bolts (3) and 8 bolts (2) to a torque of 103 to 117 N·m
(76 to 87 lb ft).
c. For the C2.6 tighten 8 bolts (3) and 8 bolts (2) to a torque of 78 to 90 N·m
(58 to 66 lb ft).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Nov 18 09:54:37 UTC+0800 2019
3/3242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 242D SKID STEER LOADER A9W
Configuration: 242D Skid Steer Loader A9W00001-UP (MACHINE)
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242553
Crankshaft Pulley - Remove and Install
SMCS - 1205-010
Removal Procedure
Start By:
a. Remove the v-belt.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 1 g02795206
1. Use a suitable tool in order to prevent the crankshaft from rotating. Remove bolt (2) in order
to remove crankshaft pulley (1).
Installation Procedure
1. Install crankshaft pulley (1) in the reverse order of removal.
a. Apply clean engine oil to the threads of bolt (2). Tighten bolt (2) to a torque of
255 to 274 N·m (188 to 202 lb ft).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Nov 18 09:55:32 UTC+0800 2019
2/2242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 242D SKID STEER LOADER A9W
Configuration: 242D Skid Steer Loader A9W00001-UP (MACHINE)
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242559
Crankshaft Front Seal - Remove and Install
SMCS - 1160-010
Removal Procedure
Start By:
a. Remove the crankshaft pulley.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1/3242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 1 g02795123
Illustration 2 g02795124
1. Use a suitable pry bar to remove crankshaft front seal (1).
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 390-1140 Driver 1
B 6V-6640 Sealant 1
Note: The crankshaft front seal should be installed dry. Lubricate the inner rubber portion of the
crankshaft front seal.
2/3242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 3 g02796112
Illustration 4 g02795123
1. Lubricate the inner rubber portion of crankshaft front seal (1). Apply Tooling (B) on
crankshaft front seal (1). Position crankshaft front seal (1) on Tooling (A). Install crankshaft
front seal (1) on the crankshaft.
End By:
a. Install the crankshaft pulley.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Nov 18 09:56:28 UTC+0800 2019
3/3242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02795977
3/5242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 2 g02795978
Illustration 3 g02795981
Alignment of timing marks
1. Ensure that Timing Marks (X) on the camshaft gear and the crankshaft gear are aligned.
Refer to Illustration 1.
2. Ensure that Timing Marks (Y) on the idler gear and the camshaft gear are aligned. Refer to
Illustration 2.
3. Ensure that Timing Marks (Z) on the idler gear and the fuel injection pump gear are aligned.
Refer to Illustration 3.
4/5242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 4 g02795984
4. Remove bolts (2), washer (3), and the idler shaft from idler gear (1). Remove idler gear (1)
and the washer.
Illustration 5 g02795985
5. Use Tooling (A) to remove idler gear bearing (4) from idler gear (1).
Installation Procedure
1. Install idler gear (1) in the reverse order of removal.
2. Tighten bolts (2) to a torque of 30 to 34 N·m (22 to 25 lb ft).
a. Ensure that the gears, cylinder block surface, and idler gear (1) are clean and free
from wear or damage. If necessary, replace any components that are worn or
damaged.
b. Lubricate idler gear bearing surface (4) with clean engine oil.
c. Check oil clearance between the idler gear shaft and the idler gear bushing.
d. Check the idler gear shaft outer diameter and the inner diameter for the idler gear
bushing.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Nov 18 09:57:24 UTC+0800 2019
5/5242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the cooling system into a suitable container for storage or disposal.
Illustration 1 g02795275
2. Disconnect hose assemblies (1) and (2) from the oil cooler.
Illustration 2 g02795251
3. Remove bolts (4).
3/5242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 4. Remove front housing (3) and the gasket.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Ensure that the front housing is clean and free from damage. If necessary, replace the front
housing.
2. Clean all the gasket surfaces of the cylinder block.
Illustration 3 g02864317
3. Apply liquid gasket to the seam between the lower crankcase section (6) and the upper
crankcase section (5).
4/5242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 4 g02795251
4. Align a new gasket and install the gasket to the cylinder block.
5. Tighten 13 bolts (4) in a side to side sequence. Tighten bolts (4) to a torque of 24 to 27 N·m
(18 to 20 lb ft)
Illustration 5 g02795275
6. Connect hose assemblies (1) and (2) to the oil cooler.
End By:
a. Install the crankshaft front seal.
b. Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling
System Coolant - Fill" for the correct procedure.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Nov 18 09:58:19 UTC+0800 2019
5/5242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. Illustration 1 g02795345
1. Disconnect tube assembly (1) .
2. Disconnect hose assemblies (2) and (5) .
3. Remove bolts (4) .
4. Remove valve mechanism cover (3) .
5. If necessary, remove O-ring seal in valve mechanism cover (3) and replace with new.
Installation Procedure
1. Install valve mechanism cover (3) in the reverse order of removal.
a. Tighten bolts (4) to a torque of 10 to 11 N·m (87 to 100 lb in).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Nov 18 09:59:15 UTC+0800 2019
3/3242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
Illustration 1 g02882621
1. Install Tooling (A) and remove bridge dowel (1).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B 390-1142 Spacer 1
Illustration 2 g02882716
3/4242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 3 g02882838
1. Use a press or hammer to drive bridge dowel (1) to a height that is flush with Tooling (B).
End By:
a. Install valve springs of bridge dowel being repaired.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Nov 18 10:00:11 UTC+0800 2019
4/4242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 242D SKID STEER LOADER A9W
Configuration: 242D Skid Steer Loader A9W00001-UP (MACHINE)
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242605
Rocker Shaft and Push Rod - Remove and Install
SMCS - 1102-010; 1208-010
Removal Procedure
Start By:
a. Remove valve mechanism cover.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
Illustration 1 g02795549
1. Remove bolts (3) and tube assembly (4).
2. Remove bolts (2) and brackets (1).
1/2242D Skid Steer Loader A9W00001-UP (MACHINE)(SEBP6427 - 40) - Documentation
2019/11/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...