The document provides instructions for removing and installing a flywheel on a Caterpillar C3.3B engine. It lists the required tools which include guide studs and a link bracket. The removal procedure involves removing bolts from the flywheel, installing guide studs into the crankshaft, and using a lifting device to remove the flywheel. Instructions are given to inspect the flywheel and ring gear for wear or damage and replace any worn or damaged components. The installation procedure involves reversing the removal steps.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fjjskekskem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fujsjefskekfksem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts/screws, removing parts, installing replacement parts in the reverse order, and noting important safety information and checks to perform. Torque specifications are provided where relevant.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fhshefjjskefkem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components for wear or damage, and installing parts in the reverse order of removal while applying grease or installing new gaskets as specified. Safety notices are included to contain fluids and wear protective equipment.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ujfjdkkmsme
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ufjjjskkmsmed
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components, and installing parts in the reverse order of removal while following safety precautions. Torque specifications and required tools are provided where needed.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...tengtui535
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a numbered list. Safety precautions are provided, and technicians are instructed to clean parts and replace any that show wear or damage. Torque specifications are given for reinstallation.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal requires removing screws and covers. Installation includes cleaning, inspecting clearances, reinstalling covers with screws.
- Water pump - Removal requires removing belts, bolts, and pulley. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal requires draining coolant, disconnecting hoses, and removing bolts and gasket. Installation is the reverse
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8seodkdmdmed3
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fjjskekskem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fujsjefskekfksem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts/screws, removing parts, installing replacement parts in the reverse order, and noting important safety information and checks to perform. Torque specifications are provided where relevant.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fhshefjjskefkem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components for wear or damage, and installing parts in the reverse order of removal while applying grease or installing new gaskets as specified. Safety notices are included to contain fluids and wear protective equipment.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ujfjdkkmsme
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ufjjjskkmsmed
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components, and installing parts in the reverse order of removal while following safety precautions. Torque specifications and required tools are provided where needed.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...tengtui535
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a numbered list. Safety precautions are provided, and technicians are instructed to clean parts and replace any that show wear or damage. Torque specifications are given for reinstallation.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal requires removing screws and covers. Installation includes cleaning, inspecting clearances, reinstalling covers with screws.
- Water pump - Removal requires removing belts, bolts, and pulley. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal requires draining coolant, disconnecting hoses, and removing bolts and gasket. Installation is the reverse
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8seodkdmdmed3
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...ze6074xunong
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkddmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fjskemmd4r
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Loosen plug and carefully remove cap to release spring force and remove parts. Install in reverse order.
- Engine oil pump - Remove screws and covers to access rotors. Inspect for wear and install ensuring proper clearance.
- Water pump - Remove bolts to access pump. Inspect gasket and install new one when reinstalling pump.
- Water temperature regulator - Disconnect hose and remove bolts/gasket to access regulator. Check operation on installation.
- Flywheel - Loosen bolts in specific pattern and remove using puller. Clean
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - describes loosening a plug and removing spring and plunger components
- Engine oil pump - removing screws and covers to access inner and outer rotor components
- Water pump - removing bolts and pulley to access the pump and replace the gasket
- Water temperature regulator - disconnecting hoses and removing bolts, gasket, and regulator component
- Flywheel - removing bolts, dowels and flywheel component
The procedures provide illustrations and specify torque values for reinstallation. Safety and cleaning notes are included.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usjejkdmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fujskdiddkmdm3e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...gen78guozun
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...xiapokang564341
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, plugs, and other fasteners to access the components. Safety precautions and required tools are noted. Installation is the reverse of the removal process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...hvy7sbkw8e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing components like caps, covers, rotors, pumps, regulators and flywheels. Special tools may be required and safety precautions are noted. Reinstallation is the reverse of removal, with cleaning, inspection and replacement of damaged or worn parts as needed. Torque specifications are provided where applicable.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...wenxian17880
The document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- The engine oil relief valve, which involves loosening a plug and carefully removing a cap to release spring force.
- The engine oil pump, which requires removing screws and covers to access the inner and outer rotors.
- The water pump, which is removed by taking off bolts and pulley, and installing a new gasket.
- The water temperature regulator, which is accessed by disconnecting hoses and removing bolts and gaskets.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfjjsjekkmsmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfdjdjfkjksk
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjsjefskekfmme
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing following the reverse order of removal while applying lubricants and torques as specified. Safety notices are included to wear protective equipment and contain fluids.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjjskekfsem
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Removing and installing the engine oil relief valve
- Removing and installing the engine oil pump
- Removing and installing the water pump
- Removing and installing the water temperature regulator
- Removing and installing the flywheel
The procedures provide detailed steps for each job, including necessary tools and torque specifications. Safety notices are included to warn technicians of potential hazards.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening bolts in a specific sequence, and removing the cylinder head. Dowel pins must be inspected and new gaskets installed. When installing, the cylinder head is positioned with guide bolts and tightened in a numerical sequence using a torque wrench and degree wheel. Hoses are then reconnected.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for proper installation of the cylinder head and lifter group.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for tightening bolts to the specified torque and angle.
CASE IH Rowtrac 370 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH tractors and covers safety rules, engine systems, transmission systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering systems, wheels, tracks and suspensions, cab climate control, electrical systems, and bodywork. It provides maintenance and repair instructions for qualified service personnel.
CASE IH Quadtrac 620 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 580 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 540 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains information on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulic systems, frames, steering, wheels, tracks, cab climate control, and electrical systems. The manual is intended to assist technicians with servicing and repair.
CASE IH Quadtrac 500 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
More Related Content
Similar to Caterpillar Cat 279D COMPACT TRACK LOADER (Prefix RCX) Service Repair Manual (RCX00001 and up).pdf
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...ze6074xunong
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkddmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fjskemmd4r
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Loosen plug and carefully remove cap to release spring force and remove parts. Install in reverse order.
- Engine oil pump - Remove screws and covers to access rotors. Inspect for wear and install ensuring proper clearance.
- Water pump - Remove bolts to access pump. Inspect gasket and install new one when reinstalling pump.
- Water temperature regulator - Disconnect hose and remove bolts/gasket to access regulator. Check operation on installation.
- Flywheel - Loosen bolts in specific pattern and remove using puller. Clean
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - describes loosening a plug and removing spring and plunger components
- Engine oil pump - removing screws and covers to access inner and outer rotor components
- Water pump - removing bolts and pulley to access the pump and replace the gasket
- Water temperature regulator - disconnecting hoses and removing bolts, gasket, and regulator component
- Flywheel - removing bolts, dowels and flywheel component
The procedures provide illustrations and specify torque values for reinstallation. Safety and cleaning notes are included.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usjejkdmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fujskdiddkmdm3e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...gen78guozun
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...xiapokang564341
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, plugs, and other fasteners to access the components. Safety precautions and required tools are noted. Installation is the reverse of the removal process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...hvy7sbkw8e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing components like caps, covers, rotors, pumps, regulators and flywheels. Special tools may be required and safety precautions are noted. Reinstallation is the reverse of removal, with cleaning, inspection and replacement of damaged or worn parts as needed. Torque specifications are provided where applicable.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...wenxian17880
The document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- The engine oil relief valve, which involves loosening a plug and carefully removing a cap to release spring force.
- The engine oil pump, which requires removing screws and covers to access the inner and outer rotors.
- The water pump, which is removed by taking off bolts and pulley, and installing a new gasket.
- The water temperature regulator, which is accessed by disconnecting hoses and removing bolts and gaskets.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfjjsjekkmsmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfdjdjfkjksk
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjsjefskekfmme
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing following the reverse order of removal while applying lubricants and torques as specified. Safety notices are included to wear protective equipment and contain fluids.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjjskekfsem
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Removing and installing the engine oil relief valve
- Removing and installing the engine oil pump
- Removing and installing the water pump
- Removing and installing the water temperature regulator
- Removing and installing the flywheel
The procedures provide detailed steps for each job, including necessary tools and torque specifications. Safety notices are included to warn technicians of potential hazards.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening bolts in a specific sequence, and removing the cylinder head. Dowel pins must be inspected and new gaskets installed. When installing, the cylinder head is positioned with guide bolts and tightened in a numerical sequence using a torque wrench and degree wheel. Hoses are then reconnected.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for proper installation of the cylinder head and lifter group.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for tightening bolts to the specified torque and angle.
Similar to Caterpillar Cat 279D COMPACT TRACK LOADER (Prefix RCX) Service Repair Manual (RCX00001 and up).pdf (17)
CASE IH Rowtrac 370 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH tractors and covers safety rules, engine systems, transmission systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering systems, wheels, tracks and suspensions, cab climate control, electrical systems, and bodywork. It provides maintenance and repair instructions for qualified service personnel.
CASE IH Quadtrac 620 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 580 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 540 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains information on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulic systems, frames, steering, wheels, tracks, cab climate control, and electrical systems. The manual is intended to assist technicians with servicing and repair.
CASE IH Quadtrac 500 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 470 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains information on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulic systems, frames, steering, wheels, tracks, cab climate control, and electrical systems. The manual is intended to assist technicians with servicing and repairs.
CASE IH PUMA 210 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
This document provides instructions for disassembling and assembling the travel motor of a 313D2 excavator. The disassembly process involves 27 steps to remove components like the motor head, brake piston, barrel assembly, springs and seals. The assembly process is outlined in 13 steps and provides details on cleaning, lubricating and installing components in the reverse order of disassembly. Special notes are provided regarding part orientations, identification marks and keys to ensure correct reassembly.
The document provides disassembly instructions for the final drive, travel motor, and various other components of 313D2 and 313D2 GC excavator models. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, gears, plates, and seals. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process. Detailed illustrations supplement the text instructions.
Caterpillar Cat 313F L Excavator (Prefix NLG) Service Repair Manual (NLG00001...f8usejkddmmd
This document provides instructions for removing the front housing on a C4.4 engine. It involves:
1. Removing various other components first like the fan, pulley, oil pan, gears, and pump.
2. Disconnecting a harness, cutting a cable strap, and removing bolts to detach a bypass tube.
3. Removing bolts of different lengths to separate the front housing from the engine. Care must be taken to properly contain fluids.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists over 30 detailed steps to disassemble components like the final drive, travel motor barrel assembly, planetary gear assembly, counterbalance valve housing assembly, and more. Safety notices are provided throughout to warn of hazards like released spring forces, hot or pressurized components, and ensuring fluids are contained. Required specialty tools are listed at the start for tasks like removing bearings, pistons, and other parts.
The document provides disassembly instructions for the final drive, travel motor, and various other components of 313D2 and 313D2 GC excavator models. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, gears, plates, and seals. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process. Detailed illustrations supplement the text instructions.
This document provides instructions for removing the front housing on a C4.4 engine. It involves:
1. Removing various other components first like the fan, crankshaft pulley, oil pan, accessory drive, water pump and timing gears.
2. Disconnecting a harness assembly and removing bolts that secure a bypass tube to the front housing.
3. Removing bolts of various lengths that secure the front housing, and then removing the front housing from the engine.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and parts and outlines 16 steps to disassemble the final drive, 13 steps to disassemble the travel motor, and 15 steps to disassemble the counterbalance valve. Safety notices are included regarding releasing pressures and springs.
This document provides instructions for disassembling the final drive, travel motor, and various other components of a 313D2 excavator. It lists the required tools and safety precautions and then outlines 16 steps to disassemble parts like the final drive, traction control valve, counterbalance valve, travel motor, and barrel assembly. Detailed illustrations are provided to identify specific components as they are removed.
CASE IH PUMA 195 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines 15 steps to disassemble the final drive, including draining oil and removing sprockets, valves, and bearings. It then details 19 steps to disassemble the travel motor, removing seals, plates, pistons, and the barrel assembly. Safety cautions are provided throughout regarding contained fluids, pressurized components, and released spring forces.
The document provides instructions for removing and installing various engine components on a Caterpillar 313D excavator. Specifically, it details procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear from the front gear group. The instructions include lists of required tools and step-by-step processes with illustrations for each procedure.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. These include draining fluids, removing covers, plates, seals, springs, pistons, and other parts. Safety precautions are provided to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar Cat 312D2 L Excavator (Prefix MPP) Service Repair Manual (MPP0000...f8usejkddmmd
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using tools to pull bearings. It also details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and springs. Safety cautions are provided throughout regarding releasing pressures and spring forces.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242518
Engine Oil Relief Valve - Remove and Install
SMCS - 1315-010
Removal Procedure
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
Illustration 1 g02788578
Illustration 2 g02788541
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Loosen plug (1). Carefully remove cap (1) from the front housing cover.
Note: The spring force will be released when the cap is removed.
2. Remove plug (1), washer (2), spring (3), and plunger (4) from the bore for the relief valve in
the front housing cover.
Installation Procedure
1. Install engine oil relief valve (1) in the reverse order of removal.
a. Install plug (1) and tighten plug (1) to a torque of 69 to 78 N·m (51 to 57 lb ft).
Note: Ensure that the spring is properly located inside the plunger and the cap.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:47:54 UTC+0800 2019
2/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242520
Engine Oil Pump - Remove and Install
SMCS - 1304-010
Removal Procedure
Start By:
a. Remove the front housing.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 1 g02788686
1. Remove screws (2) and cover (1).
Illustration 2 g02788689
2. Remove inner rotor (4) from outer rotor (3).
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 129-1967 White Grease 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. NOTICE
If any part of the engine oil pump is worn or damaged, the complete
assembly of the engine oil pump must be replaced.
1. Ensure that all components of the engine oil pump are clean and free from wear and
damage.
Illustration 3 g02788689
2. Position outer rotor (3) into the pump body. Check the clearance between outer rotor (3) and
the pump body.
3. Install inner rotor (4) into outer rotor (3). Check the clearance between the lobes of outer
rotor (3) and inner rotor (4).
Illustration 4 g02788686
4. Position a strip of Plastigage onto the outer rotor face with Tooling (A). Position cover (1)
and install screws (2) and torque. Remove cover (1) and check clearance between the rotor
and cover (1).
5. Position cover (1) and install screws (2). Tighten screws (2) to a torque of 8 to 9 N·m
(70 to 83 lb in).
3/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. End By:
a. Install the front housing.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:48:53 UTC+0800 2019
4/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242522
Water Pump - Remove and Install
SMCS - 1361-011; 1361-012
Removal Procedure
Start By:
a. Remove the v-belts.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
1. Refer to Operation and Maintenance Manual, "Coolant - Change" for the proper draining
and filling procedures.
Illustration 1 g02794283
2. Remove bolts (2) and remove pulley (1).
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 2 g02794286
3. Remove bolts (4).
4. Remove water pump (3) and discard the gasket. Install a new gasket upon installation.
Installation Procedure
1. Install water pump (3) in the reverse order of removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:49:52 UTC+0800 2019
2/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242525
Water Temperature Regulator - Remove and Install - C3.3B
SMCS - 1355-010
S/N - A9W1-UP
S/N - A9Z1-UP
S/N - AJ71-UP
S/N - CE21-UP
S/N - DML1-UP
S/N - EML1-UP
S/N - F8C1-UP
S/N - FMR1-UP
S/N - FTK1-UP
S/N - GBJ1-UP
S/N - GTK1-UP
S/N - HAM1-UP
S/N - HEL1-UP
S/N - HMR1-UP
S/N - JBE1-UP
S/N - JRD1-UP
1/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. S/N - JRF1-UP
S/N - JRS1-UP
S/N - JSL1-UP
S/N - JSN1-UP
S/N - KTS1-UP
S/N - L661-UP
S/N - L771-UP
S/N - L881-UP
S/N - LST1-UP
S/N - MLT1-UP
S/N - MPW1-UP
S/N - NTL1-UP
S/N - PPT1-UP
S/N - RCX1-UP
S/N - SEN1-UP
S/N - STK1-UP
S/N - TAZ1-UP
S/N - TLK1-UP
S/N - WCT1-UP
Removal Procedure
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
2/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Dispose of all fluids according to local regulations and mandates.
1. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the
correct draining procedure.
Note: Coolant only needs drained to below the water temperature regulator.
Illustration 1 g02794379
2. Disconnect hose assembly (1).
3. Remove bolts (2) from the water temperature regulator housing . Remove water temperature
regulator elbow (3).
Illustration 2 g02794381
3/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 3 g02794385
4. Remove gasket (5) and remove water temperature regulator (4) from the water temperature
regulator housing.
Note: Note the orientation of the water temperature regulator elbow.
Installation Procedure
1. Install water temperature regulator (4) in the reverse order of removal.
a. Check the water temperature regulator for correct operation. Refer to System
Operation, Testing and Adjusting, "Water Temperature Regulator - Test" for the
correct procedure to test the water temperature regulator. If any components of the
water temperature regulator housing are worn or damaged, the complete assembly
must be replaced.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:50:52 UTC+0800 2019
4/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02794543
1. Remove two bolts (2) from flywheel (1).
Illustration 2 g02798921
2. Install Tooling (A) into the crankshaft.
3. Install Tooling (B) and a suitable lifting device on flywheel (1). The weight of flywheel (1)
is approximately 30 kg (66 lb).
4. Remove remaining bolts (2).
5. Remove flywheel (1) from the cylinder block.
3/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 3 g02798923
6. Inspect flywheel (1) and the ring gear (3) for wear and damage. Replace any worn
components or damaged components.
7. If necessary, remove the flywheel ring gear (3), follow Step 7.a through Step 7.b.
a. Place the flywheel assembly on a suitable support.
b. Use a hammer and a punch in order to remove ring gear (3) from flywheel (1). If
necessary, a torch may be needed to heat ring gear (3).
Note: Identify the orientation of the teeth on the flywheel ring gear (3).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A -
Guide Stud
M12 - 1.25 by 100 mm
2
B 138-7573 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
4/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Illustration 4 g02798923
Always wear protective gloves when handling parts that have been
heated.
1. If flywheel ring gear (3) was removed, follow Step 1.a through Step 1.c in order to install
ring gear (3) to flywheel (1).
a. Identify the orientation of teeth on new ring gear (3).
Note: The chamfered side of ring gear teeth must face toward the starting motor when
the flywheel is installed. This position will ensure the correct engagement of the
starting motor.
b. Raise heat of flywheel ring gear (3) in an oven to a maximum temperature of 250 °C
(482 °F) prior to installation.
Note: Do not use a torch to heat the ring gear.
c. Ensure that the orientation of ring gear (3) is correct and quickly install the ring gear
onto flywheel (1).
5/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 5 g02798921
2. Install Tooling (B) and a suitable lifting device on flywheel (1). The weight of flywheel (1)
is approximately 30 kg (66 lb).
3. Install Tooling (A) into the crankshaft.
4. Use the lifting device to position flywheel (1) onto Tooling (A).
5. Install bolts (2) to flywheel (1).
6. Remove Tooling (A).
Illustration 6 g02794543
7. Install remaining bolts (2) to flywheel (1). Apply engine oil to bolts. Tighten bolts (2) to a
torque of 98 to 107 N·m (72 to 80 lb ft).
8. Check the run out of the flywheel. Refer to Specifications, "Flywheel" for further
information.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:51:51 UTC+0800 2019
6/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242540
Crankshaft Rear Seal and Wear Sleeve - Remove - Includes
Crankshaft Gear
SMCS - 1161-011; 7558-011
Removal Procedure
Start By:
a. Remove the flywheel.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Place the engine at top dead center.
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g02799897
2. Use a screw driver to remove rear seal (1).
Illustration 2 g02799899
3. Check the alignment of crankshaft gear (2) and camshaft gear (3). Remove crankshaft gear
(2) and ring seal.
Illustration 3 g02799901
4. Place crankshaft gear (2) with wear sleeve (4) in a suitable vice. Remove wear sleeve (4)
with a suitable chisel.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:52:50 UTC+0800 2019
2/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242547
Crankshaft Rear Seal and Wear Sleeve - Install - Includes
Crankshaft Gear
SMCS - 1161-012; 7558-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
390-1146 Crankshaft Rear Seal and Wear Sleeve Driver(1)
1
423-9665 Crank shaft Rear Seal and Wear Sleeve Driver(2)
1
(1)
Used for the C3.3B
(2)
Used for the C2.6
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...