The document describes the products and services offered by N.D. AUTOMATION, which includes automation projects, control panels, sensors, process indicators, safety curtains, and more. They provide standard and custom-built solutions for applications across various industries.

1. <br /> N.D.AUTOMATION We N.D.AUTOMATION is a leading manufacturer of ALL TYPES OF AUTOMATION PROJECTS * CUSTOM BUILT POKE - YOKES CONTROL PANELS : 1] PLC & DRIVES BASE CONTROL PANELS 2] CUSTOM BUILT & LOGICAL CONTROL PANELS 3] DISTRIBUTION BOARDS 4] AUTOMATIC POWER FACTOR CONTROL PANELS 5] DG SYNCRONISATION CONTROL PANELS 6] ALL ELECTRICAL & ELECTRONICS PROJECT WORKS ALL TYPES OF STD & NON STD CUSTOM BUILTS SENSORS TO ALL APPLICATIONS 1] PROXIMITY 2] TEMPERATURE 3]PRESSURE 4] LEVEL 5] LOAD CELL 6 ]CURRENT 7] SPEED ALL TYPES OF STD & NON STD CUSTOM BUILTS ALL PROCESS INDICATORS & CONTROLLERS1] TEMPERATURE INDICATORS & CONTROLLERS IN ALL SIZES WITH 1 T0 4 SET POINTS , RS 232 , RS485 & RETRANSMISSION / ANALOUGE OUTPUT WITH ALL TYPES CUSTOM BULIT LOGICS, RS485 DISPLAY SIZES : 0.5 ,1,2,4,6,8,12 INCHES 2] TEMPERATURE SCANNERS , DATA LOGGERS & PID CONTROLLERS2] LOAD CELL INDICATORS & CONTROLLERS – 1 TO 4 SET POINTS ,RS 232 ,RS 485 & RETRANSMISSION / ANALOUGE OUTPUT WITH ALL TYPES OF CUSTOM BULIT LOGICS.3] PRESSURE / LEVEL / CURRENT INDICATORS & CONTROLLERS – 1 TO 4 SET POINTS , RS 232 RS485 & RETRANSMISSION / ANALOUGE OUTPUT WITH ALL TYPES OF CUSTOM BULIT LOGICS.4] FLOW INDICATOR TOTALIZERS WITH CONTROLLERS 1 TO 4 SET POINTS , RS 232 RS485 & RETRANSMISSION / ANALOUGE OUTPUT WITH ALL TYPES OF CUSTOM BULIT LOGICS.5] VOLTAGE / CURRENT INDICATORS & CONTROLLERS & CUSTOM BUILT LOGIC CONTROLLERS6] HEATER FAIL INDICATORS & CONTROLLERS WITH ALL TYPES OF CUSTOM BULIT LOGICS.7] ALL TYPES OF SIGNAL ISOLATORS & CONVERTORS FOR TO ALL APPLICATIONS8] THREE PHASE MOTOR PROTECTION CONTROLLER WITH UNDER & OVER VOLTAGE , CURRENT SET POINTS & PHASE UNBALANCE , SINGLE PHASING , PHASE REVERSE PROTECTIONS9] FLAME PROOF I NDICATORS , CONTROLLERS & CONTROL PANELSTIMERS : 1] ON DELAY , 2] OFF DELAY , 3] CYCLIC , 4] SEQUENTIONAL , 5] LOGICAL 6] RUNNING CYCLE & LAST CYCLE TIME DISPLAY TIMERS WITH SEPARATE DISPLAY 7] MACHINE TOTAL RUN HOUR & SHIFT / DAY RUN HOUR DISPLAY TIMERS WITH SEPARATE DISPLAY 8] REAL TIME CLOCKS WITH 4 SET POINTS FOR SHIFT , TEA , LUNCH ALARMS COUNTERS : 1] EVENT [ PLANE] COUNTERS , 2] PRESET COUNTERS , 3] BATCH COUNTERS 4] SPEED /RPM COUNTERS , 5] LENGTH & MPM COUNTERS , 6] SHIFT & LOGICAL COUNTERS 7] RUNNING HOUR & LAST HOUR PRODUCTION COUNTERS WITH SEPARATE DISPLAY 8] RUNNING HOUR & LAST HOUR WITH TOTAL PRODUCTION COUNTERS WITH SEPARATE DISPLAY 9] PRESS TOTAL STROKE & SHIFT / DAY STROKE COUNTERS WITH BOTH HAND SAFETY LOGICS & SEPARATE DISPLAYS. 10] ALL TYPES OF PRODUCTION DISPLAY BOARDS & ROLLING DISPLAY BOARDS IN 1 INCH TO 12 INCH WITH OPTIONAL ALL CUSTOM BUILT LOGICS , RS 232 & RS 485 COMMUNICATION PORTS ** ELECTRONIC SAFETY CURTAINS / ELECTRONIC PRESS GUARDS ND MAKE & IMPORTED N.D.AUTOMATION 9] TRUE RMS THREE PHASE VOLT , AMP , AVF METERS & SINGLE PHASE AVF METERS 10] THREE PHASE ENERGY METERS & THREE PHASE POWER ANALYSER OPTIONAL RS 485 11] TRUE RMS SINGLE PHASE & THREE PHASEPOWER FACTOR MTR & SINGLE PHASE WATT METER , FREQUENCY METERS 12] SINGLE PHASE AC/DC ALL RANGES VOLT METERS & AMP METERS 13] WINDOW BASE ANNOUNCIATORS , SMPS , VARIABLE POWER SUPPLIES , HOOTERS, TOWER LAMPS , REVOLVING LAMPS , RELAY & RELAY CARDS , SSR & SSR CARDS 14] ALL TYPES CONTROL TRANSFORMERS & ISOLATION TRANSFORMERS 15] Single phase Preventer with under & over voltage controllers with display in din rail mounting 15] Three phase under , over voltage & current with single phasing controller with display& separate Relay to voltage & current in panel mounting 96x96 16] We Major dealing & Supplying of Sick ,Omron , Banner , Data sensors , Autonics Textronics, Fuji , Delta , Siemens , L&T , Mitsubishi ,ABB , Allen Bradley & other make Customer required Office: Bldg. No.14 flat no.4 Purnanagar, Shahunagar behind RTO office, Chinchwad Pune--19 T / F : 020-27491210 Mb. 9850025591 Email : ndautomation2004@gmail.com , ndautomation@rediffmail.com . ALL TYPES PROXIMITY SENSORS / SWITCHES All types of STD & non STD sensors / switches Available in All ranges, sizes, lengths & enclosures as per Costumer required for all applications. 1] Inductive, Capacitive , Magnetic OR Reed , Photo [Optical] , Through beam , Laser beam , Colour mark, Fiber optic , Retro-reflective , Light Intensity , Distance & level Measurement Sensors, Slot & Square type Proximity sensors /switches , Encoders & All types of Encoders & Couplings 2] Lvdt, Linear scales & Linear Potentiometers Please Specify for Quotation or in order: 1] Types of sensor 2] Operating supply of sensor 3] OD. Of sensor 4] Logic of sensor 5] Operating Distance, 6] Application of sensor 2] ALL TYPES TEMPERATURE SENSORS 1] PT—100 [RTD] 2] THERMOCOUPLE a] J type [ fe-con] b] K type [cr-al] , c] PT-PT-RH d] Non contact type Please Specify for Quotation or in order : 1] Type of sensor 2] OD. Of sensor 3] Length of sensor 4] With Head / Without Head 5] Cable length of sensor – Teflon / SS braided 3] ALL TYPES PRESSURE SENSORS Pl. Specify for Quotation or in order:1] Supply 2] Pressure Range 3] Output of sensors For Pressure Indicator Controller: Pl. Specify for Quotation or in order 1] Supply: 110/ 230 vac, 50 Hz 2] Range 3] No. of set Points 4] No. of Output 5] Size: 48x48 / 48x96 / 96x96 6] Optional Output: Voltage / Current & Communication, 7] If any inbuilt logic pl.specify. <br /> <br /> <br /> ALL TYPES LOAD CELL SENSORS S TYPE ULC SB CMLC MCLC CP SBB PF TTX 500 TO 2000 KG 3 TO 500 KG 25kg to 100 Ton Please Specify for Quotation or in order: 1] Types of Load cell 2] Capacity of Load cell 3] Output of Load cell 4] Application of Load cell For load cell Indicator Controller Please Specify for Quotation or in order: 1] Supply Voltage 2] Range 3] No. of set points 4] Output: Relay 5] Resolution 6] Optional O/P: 1] Retransmission [ 4-20 m A OR 0-10 Vdc ] , 2] Communication RS232 OR RS 485 3] Additional Logics 5] ALL TYPES LEVEL SENSORS 1] Conductivity type level sensor 2] Float type level switch 3] Side mounted float level switch 4] Cable end float level switch 5] Level sensors for granual & powder Vibrating fork type level sensors 7] Tilt type level switch / Tilt switch 8] Rf Capacitance type level switch For coal & lime stone / material 9] Paddle type level switch 10] Ultrasonic level switch 11] Radar type level switch <br /> <br /> ELECTRONIC PRESS GUARD / SAFETY CURTAIN These instruments work on modulated infrared beams and utilize latest technique of "SYNCHRONISED CYCLIC SCANNING". The safety guards are designed for providing maximum Safety for the people working in danger zone such as power presses, shearing, bending, and Gull tone machines. Features1] Easy to install 2] Solid State Design 3] Modulated infrared beams 4] Synchronized Cyclic Scanning technique 5] Compact Control Unit6] Plug-in connectors design for easy wiring 7] Non critical alignment status indicators on sensors Electrical Specifications : ---Power Supply : 220 V AC 10% - 50Hz Range : 200 mm - 5000 mm Curtain Height : up to 1000 mm Output : Through Double Relay in series Power Consumption : 20W Type of light : Infrared Applicable to machines with emergency stop Status indicator LED's Please Specify for Quotation or in order 1] Supply Voltage 2] Operating Height 3] Operating Distance <br /> ALL TYPES STANDARD & NON-STANDARD PROCESS INDICATORS Temperature,Pressure,Load cell, Level,Voltage,Current,Speed, Rpm,Mpm,Length, Flow, Distance & no. of count Model No : PI-401 MDI-3101H MDI-3101V MDI-2101P MDI-1101 SPI-421 PIC-3102H PIC – 38 PIC-1101size : 48X48 48x96 96X48 72X72 96X96 48X48 48X96 48X96 96X96 Cut out : 44x44 44x92 92X44 68X68 92X92 44X44 44X92 44X92 92X92Supply : 24 VDC , 110 VAC , 230 V AC , 50 HZ Input : J/K/RTD/R/S/CURRENT/VOLTAGE AC/DC/LOAD CELL / PRESSURE/ m V / m A /Proximity Range : -------------------------- 4 digit fix-------------------------- x------ 4 digit programmable ----- Optional Output: Analogue output [ 0-10 vdc , 4-20 m A] , RS 232 & 485 DISPLAY SIZE : 0.56 INCH & 0.8 INCH ALL TYPES STANDARD & NON-STANDARD PROCESS IND.CONTROLLER A] PUSH TO SET FIX INPUT TEMPERATURE CONTROLLER Model No : DTC-49 MDC-3901H MDC-3901V MDC-2901 MDC-1901 size : 48X48 48x96 96X48 72X72 96X96 Cut out : 44x44 44x92 92X44 68X68 92X92 Supply : 24 VDC , 110 VAC , 230 V AC , 50 HZ Input : J/K/RTD/R/S/CURRENT/VOLTAGE AC/DC/LOAD CELL / PRESSURE/ m V / m A . Range : -------------------------- 4 digit fix ------------------------------------------------------- Set point : 1 / 2 OUTPUT : Relays 1/ 2 B] DIAL & THUMBWHEEL SETTING FIX INPUT TEMPERATURE CONTROLLER Model No: MDC-1911 MDC-2911 MDC-1931 MDC-2931 MDC-3931size : 96X96 72X72 96X96 72X72 96X48 Cut out : 92X92 68X68 92X92 68X68 92X44 Supply : 24 VDC , 110 VAC , 230 V AC , 50 HZ Input : J/K/RTD/R/S/CURRENT/VOLTAGE AC/DC/LOAD CELL / PRESSURE/ m V / m A . Range : -------------------------- 4 digit fix ------------------------------------------------------- Set point : 1 /2 OUTPUT : Relays 1 /2 ALL TYPES STANDARD & NON-STANDARD PROCESS IND.CONTROLLER C] KEY PAD SETTING UNIVERSAL INPUT SINGLE/TWO SET TEMPERATURE CONTROLLER Model No : UTC-4101 UTC-1101 UTC-4201 UTC-2201 UTC-1201 size : 48X48 96X96 48X48 72X72 96X96 Cut out : 44x44 92X92 44X44 68X68 92X92Supply : 90-270 V AC/DC SMPSInput : J/K/RTD. Range : 4 digit programmable Set Point : 1/2 Output : Relay 1 /2 D] KEY PAD SETTING FIX INPUT 1/2/3/4 SETPOINT TEMPERATURE CONTROLLERS Model No : PTC-421 MTC – 2201 MTC – 1201 MTC-3200 size : 48X48 72X72 96X96 96x48 Cut out : 44x44 68X68 92X92 92x44Supply : 90-270 V AC/DC SMPS 110 / 230 v ac 50 hzInput : J/K/RTD . Range : 4 digit programmable Set Point : 1 /2 /3 / 4 Output : Relay 1 /2 /3 /4 with ON-OFF or Time Proportional (TP) Selectable, Auto tune PID E] KEY PAD SETTING UNIVERSAL INPUT SINGLE / TWO SET AUTO TUNE PID CONTROLLER Model No : UTC-411P UTC-111P UTC-421P UTC-221P UTC-121P size : 48X48 96X96 48X48 72X72 96X96 Cut out : 44x44 92X92 44X44 68X68 92X92Supply : 90-270 V AC/DC SMPSInput : J/K/RTD. Range : 4 digit programmable Set Point : 1/2 Output : Relay 1 /2 ALL TYPES STANDARD & NON-STANDARD PROCESS IND.CONTROLLER F] Profile Temperature Controller MTC-1202 FDI-100 FDTC Application : Oven, Furnace, Metallurgical Applications Sensor: : CR/AL ‘K’ ” Type Thermocouple. Output : 2 Relays 1 C/O, 5A, 230V AC contact. R1 for control purpose. R2 = for alarm purpose. Features : Temperature, Ramp and Hold time up to 9 stages is settable.& Rate of Temperature, Set point of Temperature and Holding Time for each stage is selectable. Temperature Controller with soak time [MTC 1202] Application : Oven, Furnace, Metallurgical Applications Features : Facility to adjust hold time (soak time) according to the application. G] 8 CHANNEL SCANNER MODEL NO: MS 5708 MS 1208 SUPPLY : 24 VDC , 110/230 VAC , INPUT : J/K/ RTD / 0-10VDC & 4-20 m ARANGE : As per requirements NO.OF CHANNELS : Pl.specify OUTPUT : 6 OR 8 RELAYDISPLAY SCAN TIME : Adjustable 2 to 99 sec. SIZE : 192 X96X144 , 96X96X75FEATURES : Grouping of inputs is possible. Maximum 4 groupOptional features: RS 232 & RS485 interface Available.H] PROGRAMMABLE LOAD CELL , PRESSURE , CURRENT & HEATER FAIL INDICATOR CONTROLLERS size : 96X96 96X96 96X96 96x96 Cut out : 92X92 92X92 92X92 92x92Supply : 110 /230 VAC , 50HZInput : Load cell / POT pressure transmitter , 0-10V , 4-20m A/ m V , CT Range : 4 digit programmable Set Point : 1/2/3 Output : Relay 1 /2 /3 & With Load cell / Transmitter supplyOPTIONAL OUTPUT: Analogue output [0-10vdc,4-20m A ] Custom built Logic & RS 232 ,RS 485. ALL TYPES STANDARD & NON-STANDARD PROCESS IND.CONTROLLER I ] FLOW RATE INDICATOR CUM TOTALISERS Model No: MFC-1046 MFC-1049 MFC-2046 MFC-3006 Size : 96x96 x100 96x96x100 72x72x120 48x96x120 Cut out : 92x92 92x92 68x68 44x92 Supply : 24 VDC / 110 VAC , 230 VAC INPUT : VOLTAGE / CURRENT [ 0-10 VDC / 4-20 m A ] PULSES [ 5 V DC] RANGE: 4 DIGITS [ 0-9999 LPM ,LPH , M3/Hr Selectable Correspond to input , DISPLAY RANGE , 6 & 9 Digit. UPPER DISPLAY SHOWS TOTAL FLOW & LOWER DISPLAY SHOWS FLOW RATE OUTPUT : OPTIONAL - RELAY / RETRANSMISSION [ ANALOUGE OUTPUT] , RS 485 & SENSOR SUPPLY 24 VDC MEMORY : Non Volatile Memory in case of Power Failure J] THREE PHASE MOTOR ALL PROTECTION CONTROLLERS SUPPLY : 230VAC, 50HZ INPUT : 3 PHASE RANGE : PROGRAMMABLE OUTPUT : RELAY PROTECTIONS 1] Overload protection & Under load protection with set point user selectable 2] Over Voltage & Under Voltage Protection with set point user selectable 3] Single Phasing, Reverse Phasing & Unbalance Phasing Protections RUN MODE PARAMETERS 1] R-Y Voltage 2] Y-B Voltage 3] B-R Voltage 4] R Phase Current 5] Y Phase Current 6] B Phase Current FAULT / PROTECTIONS 1] Under Load 2] Over Load 3] Under Voltage 4] Over Voltage 5] Single Phasing 6] Reverse Phasing 7] Phase Unbalance K] LOOP POWERED TRANSMITTER INPUT : PT-100 / J/K OUTPUT : 4-20 m A & Load 6.5v loop drop allows 750ohm load @24vdc MOUNTING : Sensor Head ALL TYPES OF STD. & NON STD TIMERS TO ALL APPLICATIONS 1] TIME TOTALISER / DIGITAL HOUR METERS DTT-1000 DTT-2000 DTT-3000 DTT-56 SIZE : 96X96 72X72 48X96 38X62X75 CUTOUT: 92X92 68X68 44X92 31X54 RANGE : ---------------------------------------------0—9999.59 Hr/Min-------------------------------------------------- MEMORY : NON VOLATILE OPTINAL INPUT : PROXIMITY SWITCH / MICRO SWITCH / LIMIT SWITCH / PULSE 2] THUMB WHEEL SETTING FIX RANGE[Sec /Min /Hour ] PRESET TIMER MODEL NO : MDT-1300 MDT-2300 MDT-3300 MDT-1400 MDT-2500 SIZE : 96X96 72X72 96X48 96X96 72X72 CUTOUT : 92X92 68X68 92X44 92X92 68X68 SUPPLY : ---------------- 230 VAC, 50 HZ --------------------------------- 90-270 V AC/DC SMPS RANGE : -- 2/3 DIGIT 9.9 / 99 / , 9.99 / 99.9 /999 SEC /MIN------9.99/99.9/999 & 99.99/999.9/9999 SEC/MIN OUTPUT : RELAY OPTIONAL : MEMORY & ANY INPUT LOGIC 3] THUMB WHEEL SETTING MULTIRANGE [Sec /Min /Hour ] PRESET TIMER MODEL NO:MDT-1310 (QUADRA-I) MDT-2312 (QUADRA-II) MDT-4310 SIZE : 96X96 72X72 48X48 CUT OUT : 92X92 68X68 44X44 SUPPLY :---------------------------- 230 V AC , 50 HZ------------------------------ 90-270 V AC/DC , SMPS RANGE : --------------------------------- 9.99/99.9/ 999 SEC / MIN SELECTABLE ----------------------------------------------------- SET POINT : 1 OUTPUT : RELAY NOTE : WE GIVE CUSTOM BUILT TIMERS TO ALL APPLICATIONS & DISPLAY BOARDS ALL TYPES OF STD. & NON STD TIMERS TO ALL APPLICATIONS 4 ] KEY PAD SETTING PROGRAMMABLE UNIVERSAL TIMER MODEL NO : MDT-1044 MDT-2044 MDT-444 MDT-63 SIZE : 96X96 72X72 48X48 76X27X116 CUTOUT : 92X92 68X68 44X44 DIN RAIL SUPPLY : ---------------------------- 90 ---270 V AC / DC SMPS ----------------------------------------------------------- RANGE : -------- 9.999 / 99.99 / 999.9 / 9999 SEC/ MIN/ Hr. ----------------- x ------- 9.99 /99.9 / 999 SEC /MIN / Hr. With decimal point selectable With decimal point selectable OUTPUT : ---------------------- RELAY WITH ON DELAY & OFF DELAY SELECTABLE -------------------------- MEMORY : NON VOLATILE MEMORY SELECTABLE OPTIONAL : INPUT PROXIMITY , MICROSWITCH , LIMIT SWITCH ,PULSE & CUSTOM BUILT LOGIC 5 ] KEY PAD SETTING CYCLE TIMERS MODEL NO : CYL-1044 CYL-2044 MDT-444C MDT-63C SIZE : 96X96 72X72 48X48 76X27X116 CUTOUT : 92X92 68X68 44X44 DIN RAIL SUPPLY : ---------------------------- 90 ---270 V AC / DC SMPS ----------------------------------------------------------- RANGE : -------- 99.99 / 999.9 / 9999 SEC/ MIN ----------------- x ------- 9.99 /99.9 / 999 SEC /MIN With decimal point selectable With decimal point selectable OUTPUT : ---------------------- RELAY WITH ON & OFF DELAY SELECTABLE -------------------------- MEMORY : NON VOLATILE MEMORY SELECTABLE [ CONFIGURABLE] OPTIONAL : INPUT PROXIMITY , MICROSWITCH , LIMIT SWITCH ,PULSE & CUSTOM BUILT LOGIC 6] REAL TIME CLOCKS WITH SET POINTS FOR SHIFT , TEA , LUNCH ALARMS SUPPLY : 110 / 230 V AC, 50 HZ NO .OF SET POINTS : As per Customer Required RANGE: 0-23.59 HOUR. MIN Outputs : 4 relay NO.OF GROUPS : 4 NOTE: WE GIVE CUSTOM BUILT TIMERS TO ALL APPLICATIONS & DISPLAY BOARDS. ALL TYPES OF STD. & NON STD TIMERS TO ALL APPLICATIONS 7] RUNNING CYCLE TIME & LAST CYCLE TIME DISPLAY TIMERS MODEL NO :RCLC-1044 RCLC-2044 RCLC-444C RCLC 5356 2 INCH SIZE : 96X96 72X72 48X48 CUTOUT : 92X92 68X68 44X44 SUPPLY : ---------------------------- 90 ---270 V AC / DC SMPS ---------------------------------------- RANGE : 4 DIGIT SELECTABLE [ SEC / MIN / HOUR ] MEMORY : NON VOLATILE MEMORY 8 ] M/C TOTAL RUN HOUR & M/C SHIFT /DAY RUN HOUR TIME DISPLAY TIMERS MODEL NO : BC-1046 BC-2046 BC-445 MPC 5356 2 INCH MODEL NO :RCLC-1044 RCLC-2044 RCLC-444C RCLC 5356 2 INCH SIZE : 96X96 72X72 48X48 CUTOUT : 92X92 68X68 44X44 SUPPLY : ---------------------------- 90 ---270 V AC / DC SMPS -------------------------------------------- RANGE : 4 DIGIT SELECTABLE [ SEC / MIN / HOUR ] MEMORY : NON VOLATILE MEMORY FACILITY : 1] FRONT KEY RESET TO MACHINE SHIFT RUN HOUR & PASS WORD RESET TO MACHINE TOTAL RUN HOURS 9] KEY PAD SETTING SEQUENTIAL TIMERS MODEL NO : FRT-1044FRT-2044 MPC-5812 TYPE : Microcontroller Based Laundry Timers Sequential Timers (8 STAGES/ 12 STAGES) SIZE : 96X96 72X72 96X192X144 CUTOUT : 92X92 68X68 92X188 SUPPLY : ---------------------------- 230 V AC, 50hz ----------------------------------------------------- RANGE : 99.99 / 999.9 / 9999 SEC/ MIN With decimal point sele -- 9.99 /99.9 /999 SEC /MIN With decimal point selectable SET POINTS : 4 Set Points- Forward / Reverse / Stop / Total time -- x --- Up to 8 set points OUTPUT : 2 RELAY 8 RELAYS MEMORY : ---------------------------------- NON VOLATILE MEMORY --------------------------------------- OPTIONAL : INPUT PROXIMITY , MICROSWITCH , LIMIT SWITCH ,PULSE & CUSTOM BUILT LOGIC NOTE: WE GIVE CUSTOM BUILT TIMERS TO ALL APPLICATIONS & DISPLAY BOARDS. <br /> ALL TYPES OF COUNTERS TO ALL APPLICATIONS 1 ] DIGITAL RPM[SPEED] / MPM INDICATOR / COUNTER MODEL NO :RPM-1201 RPM-2201 RPM-3201 PI-401 PIC-310 PIC - 38 SIZE : 96X96 72X72 48X96 48X48 48X96 48X96 CUT OUT: 92X92 68X68 44X92 44X44 44X92 44X92 SUPPLY: 230 VAC , 50 HZ INPUT : --------------- PNP /NPN PROXIMITY SENSORS--------------------X --- 0-10 VDC , 4 -20 m A ----- RANGE : 4—5000 RPM / 4 --- 9999 RPM X -- SELECTABLE RANGE--- OPTIONAL : ------- PPR [ PULSE PER ROTATION ] SELECTABLE ---- X ------------------------------------ 2]DIGITAL RPM/ SPEED/MPM INDICATORS & CONTROLLERS MODEL NO: RPM-1044 RPM-2044 RPM-444 RPM-1004 PIC-1101 SIZE : 96X96 72X72 48X48 96X96 96X96 CUT OUT : 92X92 68X68 44X44 92X92 92X92 SUPPLY : ------------------------------------- 230 V AC , 50 HZ ---------------------------------------------- INPUT : --------------------------- PNP/NPN PROXIMITY / ENCODER----- X --- 0-10 VDC , 4-20m A — RANGE : ------------------------------------ PROGRAMMABLE 0-9999 -------------------------------------------- OUTPUT : ------------------------------- RELAY 1 / 2 ------------------ ----------------------------------------------- OPTIONAL : CUSTOMER REQUIRED ANY LOGIC 3] PROGRAMMABLE NORMAL [PLANE] COUNTER MODEL N0: CT-1000 CT- 2000 CT- 3000 CT—5000 CT- 56G SIZE : 96X96 72X72 48X96 36X72 38X72 CUT OUT : 92X92 68X68 44X92 32X68 31X54 SUPPLY : 230 V AC, 50 HZ INPUT : PNP / NPN PROXIMITY / LIMIT SWITCH / P.F / AC/DC VOLTAGE PULSE MEMORY : NON VOLATILE MEMORY RESET : MANUAL RESET AT FRONT KEY / BACK TERMINNEL RESET NOTE : 1] WE GIVE ALSO ALL PRODUCTS IN BIG DISPLAY 1 INCH TO 12 INCH 2] ANY TYPE – ANY QUANTITY ---- PRODUCTION DISPLAY BOARD <br /> ALL TYPES OF COUNTERS TO ALL APPLICATIONS 4] THUMB WHEEL SETTING PRESET COUNTERS MODEL NO: TWS-1400M TWS-2500M MPC-2412 MECHANICAL COUNTERS SIZE : 96X96 72X72 CUTOUT : 92X92 68X68 SUPPLY : ---------- 230 VAC , 50 HZ -----------------------------INPUT : PNP /NPN PROXIMITY /LIMIT SWITCH , PULSERANGE : 2,3,4,5 & 6 DIGIT --- 2,3,4,5 DIGITS--- 4 DIGITNO.OF SET POINTS : SINGLE SET ------- 2 / 3 SETOUTPUT : ------ 1 RELAY ---------------------------- EACH SET 1 RELAY MEMORY : NON VOLATILE MEMORYRESET : AUTO / MANUAL FRONT KEY & BACK TERMINNEL RESET. 5] PROGRAMMABLE PRESET COUNTERS MODEL NO : PC-1044 PC-2044 PC-444 PC-1006 PC -2006 SIZE : 96X96 72X72 48X48 96X96 72X72 CUTOUT : 92X92 68X68 44X44 92X92 68X68 SUPPLY :------------------------ 90---270 V AC /DC , SMPS --------------------------------------- INPUT : PNP/NPN PROXIMITY SWITCH , LIMIT/MICRO SWITCH , AC/DC PULSES ,ENCODER RANGE : 4+4 4+4 4+4 6 6 SET POINTS : --------------- 1 / 2 / 3 ------------------------------------------- OUTPUT : ------------------ EACH SET 1 RELAY ----------------------------------------- MEMORY : NON VOLATILE MEMORY RESET : AUTO / MANUAL FRONT KEY & BACK TERMINNEL OPTIONAL : CUSTOM BUILT ANY TYPES OF LOGICS & COMMUNICATION RS 485 MODBUS RTU NOTE : 1] WE GIVE ALSO ALL PRODUCTS IN BIG DISPLAY 1 INCH TO 12 INCH 2] ANY TYPE – ANY QUANTITY ---- PRODUCTION DISPLAY BOARD <br /> <br /> ALL TYPES OF COUNTERS TO ALL APPLICATIONS 6] PROGRAMMABLE BATCH COUNTERS MODEL NO : BC-1046 BC-2046 BC-445 MPC 5356 2 INCH DISPLAY SIZE : 96X96 72X72 48X48 CUTOUT : 92X92 68 X68 44X44 SUPPLY : ---- 230 V AC , 50 HZ ----- --- 90-270 V AC/DC--- --- 230 V AC , 50 HZ— INPUT : PNP/NPN PROXIMITY SWITCH , LIMIT/MICRO SWITCH , AC/DC PULSES ,ENCODER RANGE : 6+4 6+4 5+4 5 + 4 SET POINTS : --------------- 1 / 2 ------------------------------------------- OUTPUT : ------------------ EACH SET 1 RELAY ----------------------------------------- MEMORY : NON VOLATILE MEMORY RESET : AUTO / MANUAL FRONT KEY & BACK TERMINNEL OPTIONAL :CUSTOM BUILT ANY TYPES OF LOGICS & COMMUNICATION RS 485 MODBUS RTU 7] PROGRAMMABLE LENGTH COUNTER + MPM / RPM MODEL NO: LC-1046 LC-2046 LC-445 LC-3006 MPC 5062 SIZE : 96X96 72X72 48X48 48X96 CUTOUT : 92X92 68 X68 44X44 44X92 SUPPLY : ---- ----- --- 90-270 V AC/DC --- ----------------------- 230 V AC , 50 HZ— INPUT : PNP/NPN PROXIMITY SWITCH , LIMIT/MICRO SWITCH , AC/DC PULSES ,ENCODER RANGE : 6+4 6+4 5+4 6 5 + 4 SET POINTS : --------------- 1 / 2 ------------------------------------------- OUTPUT : ------------------ EACH SET 1 RELAY ----------------------------------------- MEMORY : NON VOLATILE MEMORY RESET : AUTO / MANUAL FRONT KEY & BACK TERMINNEL OPTIONAL : CUSTOM BUILT ANY TYPES OF LOGICS & COMMUNICATION RS 485 MODBUS RTU <br /> <br /> <br /> <br /> <br /> ALL TYPES OF COUNTERS TO ALL APPLICATIONS 8 ] RUNNING MIN / HOUR & LAST MIN / HOUR PRODUCTION COUNTER MODEL NO : RHLHC-1046 RHLHC2046 RHLHC-445 RHLHC 5356 2 INCH SIZE : 96X96 72X72 48X48 CUTOUT : 92X92 68 X68 44X44 SUPPLY : ---- 230 V AC , 50 HZ ----- --- 90-270 V AC/DC--- --- 230 V AC , 50 HZ— INPUT : PNP/NPN PROXIMITY SWITCH , LIMIT/MICRO SWITCH , AC/DC PULSES ,ENCODER RANGE : 4+4 4+4 5+4 5 + 4 MEMORY : NON VOLATILE MEMORY OPTIONAL TIME : MINUTE / HOUR SELECTABLE OPTIONAL : CUSTOM BUILT ANY TYPES OF LOGICS & COMMUNICATION RS 485 MODBUS RTU 9] PRESS TOTAL STROKE & SHIFT/DAY STROKE COUNTER WITH BOTH HAND SAFETY LOGIC MODEL NO: PSBHLC-1046 PSBHLC -2046 PSBHLC -445 PSBHLC -5062 SIZE : 96X96 72X72 48X48 CUTOUT : 92X92 68 X68 44X44 SUPPLY : ---- ----- --- 90-270 V AC/DC --- ----------------------- 230 V AC , 50 HZ— INPUT : BOTH HAND PUSH BUTTON RANGE : 6+4 6+4 5+4 5 + 4 SET POINTS : --------------- 1 / 2 ------------------------------------------- OUTPUT : ------------------ EACH SET 1 RELAY ----------------------------------------- MEMORY : NON VOLATILE MEMORY RESET : Front key reset for shift stroke & Back terminal / pass word reset for total stroke OPTIONAL : CUSTOM BUILT ANY TYPES OF LOGICS & COMMUNICATION RS 485 MODBUS RTU 10 ] RUNNING MIN / HOUR & LAST MIN / HOUR PRODUCTION COUNTER WITH TOTAL RUN M/H & LAST M/H COUNTER TOTAL PRODUCTION COUNTER Supply:24 vdc ,110 /230 vac , Input:PNP /NPN PROXIMITY / LIMIT SWITCH / PULSE WIH MEMORY BACK UP Facility : 1] Key lock reset to total production 2] MIN / HOUR Selectable OPTIONAL : CUSTOM BUILT ANY TYPES OF LOGICS & COMMUNICATION RS 485 MODBUS RTU <br /> ALL TYPES OF PRODUCTION DISPLAY BOARDS Pl.specify for quotation / in P.O : 1] Supply Voltage 2] Inputs 3] Range [ no.of digit ] in each display 4] Display size in inch [ 2,4,6,8,10,12 inch] 5] Any logics / Communications<br /> SIGNAL ISOLATOR / CONVERTER MI-63 SUPPLY : 24 VDC , 110 /230 VAC OR 90-270 AC/DC VAC INPUT : All types of Temperature sensors , AC/DC Voltage / Current , mV ,Resistance ,Load cell ,Frequency OUTPUT : DC Voltage / Current , Frequency [ 2,5,10 kHz , 24 vdc ] SIZE : DIN RAIL & PANEL MOUNTING [ DIGITAL] Available Models : 1] Single input—Single Output 2] Single input --- Dual output 3] Single input – 3/4 output . 4] Dual input --- Dual output 5] 5 channel Buffer Amplifier ---- 5 Input --- 5 Output 6] 5 Channel Adder Amplifier --- 5 PROGRAMMABLE DIGITAL SIGNAL ISOLATORS & CONVERTORS WITH SET POINTS SIZE : Din Rail 48x48 48x96 72x72 96x96 CUTOUT : --------- 48X48 44X92 68X68 92X92 Supply : 24 AC / DC , 110 / 230 VAC , 50 HZ INPUT : AC/DC-Voltage, Current mV,m A ,Frequency ,speed, temperature sensors, Load cell OUTPUT : Voltage & current , Relays 1,2,3,4 with set points STD & NON STD FIX & VARIABLE POWER SUPPLY [SMPS] Supply: 110 or 230 v ac, 50 Hz, Output:1] 0-30 VDC , 1 , 2, 3 ,5, 10,20,30,50& 60 Amp 2] 0-60 VDC , 1 , 2 ,5, 10 & 20 . 3] 0—300 VDC, 100 m Amp, 300 m Amp & 1 Amp. Variable Power Supply SMPS D.C. MOTOR DRIVES 1] Siemens 2] Omron 3] Allen Bradley 4] Textronics 5] Mean Well 6] Autonics 7] NHP 8] Delta makes <br /> DIGITAL STD & NON STD PANEL METERS 1] SINGLE PHASE VOLT & AMP METER --TRUE RMS THREE PHASE VOLT & AMP METER MODEL NO : AVM-31 AVM-21 AVM-11 VOLT-13 & AMP-13 SIZE : 48X96 72X72 96X96 96X96 96X96 CUTOUT : 44X92 68X68 92X92 92X92 92X92 SUPPLY : ------------ 230 VAC, 50 HZ ---------------- 90-270 AC/DC SMPS ------------------ INPUT :------ Through CT / Shunt ------------------------- 3Phase -4Wire, 230 v ac[L-N] , 3P – 3 wire [P-P] RANGE : VOLTAGE AC : 1] 0-750 V AC ------------ 3 DIGIT VOLT- 0750 & AMP---999 A CT DC : 2] 0-1000 V DC ----------- AUTO / MANUAL SCROLL ING SELECTABLE CURRENT AC : 1] 0-20 AMP Direct & Through CT 0-1999 AMP DC :0-20 A Direct & Through shunt 0-1999 AMP 2] SINGLE PHASE & THREE PHASE VOLTAGE , CURRENT, FREQUENCE METER [VAF MTR] MODEL NO : AVF-11 AVF-31 AVF-1 AVF 39 SIZE : 96X96 48X96 96X96 48x96 92X92 44X92 92X92 44x92 SUPPLY : 1P -230 VAC 90 to 270 v ac 50 /60 hz INPUT : 1Phase & ct 3 Phase - 4 Wire, 230V AC (L-N),/ 3 Phases 3 Wire, 415V AC (P-P) & 0-5A RANGE : 3 Line 3 Digit , 1 line 3 Digit -------- 3 Line 3 Digit 1 line 3 Digit ---------- DISPLAY : 0.56 INCH , 0.8 INCH ---------- 0.56 INCH , 0.8 INCH ----------- FEATURES : 1] True RMS Measurement of Voltage & Current ,2] Auto scrolling or Manual mode selectable 3] Auto decimal shifting 4] Brighter Red Seven Segment LED display for better readability 5] CT Ratio selectable up to 4500/5 A PARAMETERS : Volt – 300V , Current -0-999 -- Phase to Phase voltage ,Phase Current , Average Voltage , Current & Frequency Frequency - 45 to 65 Hz ACCURACY : --------------------------------------------------- Class 1 ------------------------------------------------- 2] SINGLE PHASE & THREE PHASE VOLTAGE & CURRENT CONTROLLERS MODEL: VCSP - UV&OVC VCSP - UV&OVC VCSP- UL,UV&OL,OVC VCSP- UL&OLC SIZE: DIN RAIL 96X96 96X96 96X96 92X92 92X92 92X92 SUPPLY: 1P 230V AC & 3 Phase 415 VAC, 50 Hz (R,Y,B &N) (No auxiliary supply) Output Contacts : Two changeover ( C-NO),Rating 5A at 230VAC Voltage trip setting : Lower Limit is 340 for Under voltage (Resolution of 1 Volt) : Upper Limit is 460 Volts for OV (resolution of 1 V)( Hysteresis between cut off & cut in is 10V) Trip Time delay : Trip time Less than 100msec.for SPP, Reverse Phasing & Over Voltage Trip Time is settable for Under Voltage & Unbalance ON Delay : Selectable by keys from 1 to 60 sec. Reset Mode: Auto reset Indications : SPP ,OVER VOLTAGE , UNDER VOLTAGE : RED LED & RELAY ON : GREEN LED Keys : [SET ] FUNCTION key, To select a set point function. [ /\ ] INC key, To increment set point. [ \/ ] DEC key, To Decrement set point.<br /> THREE PHASE ENERGY & POWER METER 1] THREE PHASE ENERGY METER Energy & Power Meter Energy Meter MODEL NO : EPM--13 EM –13 SIZE : 96X96 96X96 CUTOUT : 92X92 92X92 DISPLAY : Upper: RED, 4-Digit, 0.56\"
For KW 6-Digit LCD, 0.3\"
Lower: RED, 6-Digit, 0.4\"
For KWh SUPPLY : ------------------------------- 230 VAC, 50HZ ---------------------------------- INPUT : 3 Ph 4W, 230V AC (L-N),/ 3 Ph 3W, 415V AC (P-P) & 0-5A PARAMETER : --- 1) KW (active power) ---------------------------- KWh (active energy 2) KWh (active energy CT SELECTION :---CT Selectable (5/5 to 2008/5 A) ------------------ 1) Fixed CT 2) CT Selectable (5/5 to 2008/5 A) -- RESOLUTION : --- 1) 1 Watt to 1 KW (Auto Decimal Shifting) ------- 0.1 KWh or1 KWh (Factory Set) ------------ 2) 0.001 KWH to 1 KWH (Auto Decimal Shifting FACILITIES : ----- 1) Auto decimal shifting in KW and KWh.----------- 1) R,Y,B Reverse Phase Indication 2) Reverse phase indication on display. 2) KWh Reset Facility (optional) 3) KWh reset facility ACCURACY : Class 1 1] SINGLE PHASE & THREE PHASE POWER ANALYZER MODEL NO : PM-11H TPA – 13 L AVH – 13 SINGLE PHASE --------------- THREE PHASE --------------------------- SIZE : -------------------------------------- 96X96 ------------------------------------------------- CUTOUT : 92X92 DISPLAY: 3 Line , 4 Digit + 4 Digit + 4 Digit Seven Segment Display, 0.56” SUPPLY : ---------------- 90-270V AC/DC, SMPS ------------------------------------------------- INPUT : ------- Single Phase --------- 3 Phase --- 4 Wire, 230V AC(L-N) / 3 Phase --- 3 Wire, 415V AC (P-P), 0-5A ------- PARAMETERS: --- Volt. Phase –Neutral ---- Volt. Phase –Neutral ---- Volt. Phase –Neutral ---- ------------------------- --- Voltage Phase –Phase ------ Voltage Phase –Phase ------ ---- Phase Current --- Per Phase Current --------- Per Phase Current ------- ------- KW [ Active Power ] ----- KW Total & Per Phase ----------- KW Total------------------- ---------- KVA [ Apparent Power ] ------ KVA [ Apparent Power ] ------------ KVA [ Apparent Power ] -------- ------------- KWh [ Active Energy ] ------------- KWh [ Active Energy ] ----- KWh [ Active Energy ] --------- --------- Power Factor ------------ Power Factor per Phase & Average --- Power Factor Average -------- Frequency ------------ FREQUENCY ----------------- ---------------------------- ----------- KVAr [ Reactive Power ] ----------- ------------- -------------------- FEATURES : ------------ True RMS Measurement of Voltage & Current. ------------------------- Auto scrolling or manual mode selectable & Auto Decimal Shifting for current [ 0.1 to 0.01 A] CT ratio programmable (up to 4000/5 A) , Auto decimal shifting Brighter Amber Seven segment LED display for better readability Indication for Parameters , KWh Reset Facility <br /> POWER FACTOR , WATT & FREQUENCY METER 1] TRUE RMS POWER FACTOR METERS MODEL NO : PF -11 - 1 PHASE PF- 13 -3 PHASE SIZE : 96X96 96X96 CUTOUT : 92X92 92X92 SUPPLY : -------------------------- 90----270 V AC/DC ---------------------------------------- RANGE : --------------------------- 4 DIGIT -------------------------------------------------------- INPUT : Single Phase ,230 V AC , 5 AMP --- 3 Phase – 4 Wire , 230 V AC [ L-N] , 3 Phase – 3 Phase , 415 V AC [ P-P] ACCURACY : ---------------------------------- Class 1 -------------------------------------------------------- 2 ] TRUE RMS SINGLE PHASE WATT METER AND FREQUENCY METERS MODEL NO : WM-11 FRQ- 11 SIZE : 96X96 96X96 CUTOUT : 92X92 92X92 SUPPLY : -------------------------- 230 V AC , 50 HZ ---------------------------------------- RANGE : --------------------------- 4 DIGIT -------------------------------------------------------- INPUT : Single Phase ,230 V AC [ L-N ] , 50 HZ , CT Ratio Selectable 5 to 500/ 5 AMP PARAMETERS : WATT ----------------------------------------- FREQUENCY ACCURACY : ---------------------------------- 1% of FSD -------------------------------------------------------- 3] Three Phase True RMS Ampere, Volt & Frequency Meter AVF 39 AVF‐19, Model No’s for Voltage – Volt-19 , Current – Amp-19 & AVF – AVF-39 & AVF-19 Display : 3Line 3Digit 7Segnment LED Display Size : 96 X 96 X 75 mm (Cutout: 92 X 92) CT Ratio : Selectable from Front Key Display Scroll : Auto Manual Selection form Front Key Auxiliary Supply : 230VAC, 50Hz Accuracy : 1%<br /> THREE PHASE POWER ANALYSER WITH MODBUS AVH - 13 With Mod Bus MODEL NO : AVH – 13 SIZE : 96X96 CUTOUT : 92X92 SUPPLY : 90-270V AC/DC, SMPS INPUT : 3 Phase 4 Wire , 230V AC(L-N) / 3 Phase 3 Wire , 415V AC(P-P) & 0-5A CT Selectable DISPLAY : 4 Digit + 4 Digit + 4 Digit Seven segment display, 0.56 DISPLAY PARAMETERS : 1] KW TOTAL , 2] KWh , 3] P.F. Average , 4] Voltage Phase- Neutral , 5] Voltage Phase- Phase 6] Current Per Phase , 7] Frequency , 8] KVA (Apparent Power) Total FEATURES : 1] True RMS , 2] CT Ratio Programmable (up to 4000/5 Amp) 3] Brighter Amber Seven Segment LED Display for better readability 4] LED indication for Parameters , 5] Auto Scrolling or Manual Mode selectable Communication : RS-485,Modbus (RTU) Protocol Support Accuracy : Class 1 <br /> WINDOWS BASE / ALARM ANNOUNCIATORS Application Areas:Thermal power stations and sub-stations of Electricity Boards, Steel Plants, Sugar Industries, Cement and Chemical Industries, A.C. Plants, Process Plants, Forging industries , Foundries , Heat Treatment Plants, Hotels, Fire Alarm Systems and in telephone exchange as Audio-Visual panels etc Standard sizes of window base / Alarm Announciators No. Of Window Window PlacementPlacement Row x Column Cutout DimensionW X H Bezel Dimension W X H Depth42X292X9296X9616042X2125X92135X10216061X6285X65305X7816062X3172X92180X10216081X8365X65388X7816082X4212X92220X10216093X3172X138190X155160102X5247X92265X105160122X6285X92313X112160123X4212X138220X155160162X8360X92395X114160164X4225X175244X194160183X6278X138300X155160204X5258X190280X210160243X8375X145390X160160244X6280X190300X210160305X6278X220300X240160324X8375X185390X200160366X6278X260300X280160405X8375X220390X240160486X8375X265390X280160(With in - built hooter) 42x2190x92210x11216062x3275x92303x112180 Please Specify For Quotation Or in Purchase order : 1] Supply Voltage 2 ] No. of Windows<br /> ALL TYPES OF CONTROL PANELS & AUTOMATION PROJECTS PLC BASE PANEL DRIVE BASE LOGICAL CONTROL PANEL HEATER CONT. PANEL ISOLATION CONTROL TRANSFORMER DRIVES [ VFD ] Braking Resistor PLC M/C status Lamps SOLID STATE RELAY [SSR] , RELAY & SSR CARDS SINGLE PHASE THREE PHASE RELAY CARDS SSR CARDS Please Specify for Quotation or in order : 1] Single / Three phase 2] Input supply 3 ] Output supply 4] Rating SIGNAL TOWER LAMPS & SIREN TOWER LAMPS REVOLVING LAMPS SIRENS<br /> SPECIAL PURPOSE COUNTING & MEASUREMENT TBC-1047 MMC-2046 MMC-1044 MPC-2412 MPC-5356 MPC-5474 1] TBC - 1047 - Tablet Counter (Pharmaceutical) : Application - Pharmaceutical Tabulating Machines 2] MMC -2046 -Time Totalizer Cum RPM Indicator : Application- Fire & Safety Vehicle 3]MMC - 1044 - DRO (Displacement Readout For Machine Tools) : Displacement measurement & control 4 ] MPC - 2412 - Three Set Point Presetable by thumb wheel Counter : 72x144x120 LABORATORY APPLICATIONS a] MTC - 1202 - BOD (Bacteria Oxygen Demand) Controller b] MTC - 1202 - COD (Chemical Oxygen Demand) Controller 5] MCC - 4012 - Current Controller For Refrigeration 6] MTC - 1202 - Cold Room Controller with Defrost Facility 7] SEQUENTIAL PROCESS INDICATOR CONTROLLERS 5] MSI - 1044 - Stretch Ratio Indicator (Textile) : Application - To indicate Ratio of RPM or MPM in Textile Machinery 6] MPC - 5356 - Batch Counter (Section Warping Machine) : Display-1 Indicates Ratio of RPM/MPM , Display-2 Indicates RPM/MPM of one of the two channels 7] MPC - 5356 - Length & Speed Indicator : Bigger Display for visibility from distance , 5 Digits indication of Length (Meters) 4 Digits indication of Speed (Meters/Min) , Relay’s O/P for process control , Front/back reset facility PACKAGING INDUSTRY FSC-1006 WP-1006 System Forward & Reverse controller FSC - 1006 - Fill-Seal Controller (Packaging ] SUPPLY : Pl.specify Input : PNP / NPN Proximity switch Selectable RANGE : Fill Time : 0.01 to 9.99 sec Seal Time : 0.01 to 9.99 sec OUTPUT : 2 Relay + Buzzer output or 2SSR+ Buzzer Features : Fill time & Seal Time settable by front key pad & no. Of count settable <br /> <br />OTHER PRODUCTS: <br /> 1] VOLTAGE MONITORING RELAY- VMR 4 (SINGLE PHASE SPP)<br />2] Three Phase Voltage Monitoring Relay - VMR 3P 3] Voltage Frequency Monitoring Relay (VFR 3P) <br />4] Voltage Monitoring Relay 5] DUAL AC CONTROLLERS 6] 2 AC CONTROLLER WITH TCPIP PORT<br /> <br /> 7] 2-8 AC CONTROLLERS 8] 2-6 AC CONTROLLER [TIME TEMPERATURE] 9] TAP POSITION INDICATOR<br /> <br />