1) The document provides an operating guide for software versions 27.* of the AFS Pro 600, Pro 700, and Field Performer systems for large tractors.
2) It describes the various performance and vehicle windows that can be placed on the display screens to monitor productivity and machine operation, including windows for area, distance, time, work rate, and remote valve controls.
3) It provides instructions for setting up implements, the hitch, driveline settings, and auto PTO functions using the software for optimal equipment operation.
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Siemens catalog hmi-op7-17 operator panelDien Ha The
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Siemens catalog hmi-tp27 - 37 touch panelsDien Ha The
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
"servo motor drive, servo motor drive dealers, servo motor drive dealers in ahmedabad, servo motor drive dealers in gujarat, servo motor drive dealers in india, servo motor drive suppliers, servo motor drive suppliers in ahmedabad, servo motor drive suppliers in gujarat, servo motor drive suppliers in india, servo motor drive distributors, servo motor drive distributors in ahmedabad, servo motor drive distributors in gujarat, servo motor drive distributors in india"
MT50 for LS1024B/ LS2024B/ LS3024B PWM solar controller
Available at http://shop.ultisolar.com
About Ultisolar: Ultisolar is focus on MPPT Controller, PWM Controller, SWH Controller, SWH Station, Hall Flow Sensor
Intelligent Dashboard is a software utility that pulls together data from multiple sources and displays it in a single user interface making it easy for the operator to monitor and manage. Intelligent Dashboard provides a unified graphical platform for the operators to manage and visualization all system alarms. The system also gives the operator the option to view live video feeds of the areas that have an alarm. The system provides maintenance management software and system wide management reports. This system will combine the ZEAG cash management system, Intelligent Parking System, ANPR and CCTV camera system all into one easy to use interface for the Etihad Towers Parking System.
시크 SICK Lector63x 2D DPM스캐너 고정식바코드스캐너 산업용바코드리더 이미지스캐너 매뉴얼HION IT
Lector63x 시리즈 제품군
Lector631
Lector632
2메가픽셀 센서 장착 코드 리더
렌즈 및 필터 디자인의 유연성
교체 가능한 내장형 High-Power 조명
기능 버튼, 레이저 조준 보조장치, 음향 피드백 신호 및 피드백 LED
고분해능 센서와 지능적 처리로 어려운 판독 조건에서도 최고의 판독 성능을 보장합니다.
구성이 유연한 광학 디자인과 고성능 조명으로 고속에서나 판독 거리가 먼 애플리케이션에서도 작은 코드를 판독할 수 있습니다.
직관적 인터페이스, 장치 장착을 신속하게 해주는 기능 버튼, 내장된 조명과 조준 레이저 덕분에 신속하고 용이한 커미셔닝
음향 신호와 물체 위 컬러 피드백 스폿으로 즉각적 결과 점검 가능
microSD 메모리 카드로 간단하게 복제 기능을 활용할 수 있어 생산 라인 장애 시 기계 작동 정지 시간이 감소됨
FEATURES
Focus : Adjustable focus (manually)
Sensor : CMO S matrix sensor, gray scale values
Light source ;
To be ordered separately as accessory
Aiming laser: visible red light (λ = 630 nm ... 680 nm)
Laser class : 1, complies with 21 CFR 1040.10 except for the tolerance according to “Laser Notice No. 50”from June 24, 2007 (IEC 60825-1 (2007-3))
Scanning frequency : ≤ 50 Hz, at 1.9 megapixels resolution
Code resolution : ≥ 0.1 mm 1)
Reading distance : 50 mm ... 2,200 mm
PERFORMANCE
Bar code types : GS1-128 / EAN 128, UPC / GTIN / EAN, Interleaved 2 of 5, Pharmacode, GS1 DataBar, Code 39, Code 128, Codabar, Code 32, Code 93, USPS (Postnet, Planet, USPS4SCB), Australian Post, Dutch KIX Post, Royal Mail, Swedish Post
2D code types : Data Matrix ECC 200, GS1 Data-Matrix, MaxiCode, QR code
Stacked code types : PDF 417
Code qualification : On the basis of ISO/IEC 16022, ISO/IEC 15415, ISO/IEC 18004
INTERFACES
Serial (RS-232, RS-422) ;
Function : Host, AUX
Data transmission rate : 300 Baud ... 115.2 k Baud, AUX: 57.6 kBaud (RS-232)
USB : USB 2.0
Ethernet ;
Function : Host, AUX, image transmission
Data transmission rate : 10/100/1,000 Mbit/s
Protocol : TCP/IP, FTP (image transmission), EtherNet/IP, PROFINET (optional over external fieldbus module CDF 600-2)
CAN bus ;
Function : SICK CAN sensor network (Master/Slave, Multiplexer/Server)
Data transmission rate : 250 kbit/s ... 500 kbit/s
Protocol : CSN (SICK CAN Sensor Network)
PROFIBUS DP : Optional over external fieldbus module (CDF600-2)
Switching inputs : 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional CMC600 parameter memory in CDB650/CDM 420)
Configurable inputs : Encoder input, external trigger
Switching outputs : 6 (CDB650: “Result 1”, “Result 2”, “Result 3”, “Result 4”, 2 external outputs via CMC600 or CDM420: “Result 1”, “Result 2”, 2 external outputs via CMC600 or cable with open end:“Result 1”, “Result 2”, “Result 3”, “Result 4”)
“device ready”
Reading pulse : Switching inputs, non-powered, serial interface, Ethernet, CAN , auto pulse, presentation mode
Optical indicators : 11 LEDs (5 x status display, 5 x LED bar graph, 1 green/red feedback spot)
Acoustic indicators : Beeper (configurable)
Control elements : 2 buttons
Configuration software : SOPAS ET
Memory card : Micro SD memory card (flash card) max. 32 GB , optional
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Similar to Case IH AFS Pro600 AFS Pro700 AFS Field Performer Large Tractors Trip Computer Operator’s Manual Instant Download (Publication No.47369333).pdf
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Siemens catalog hmi-op7-17 operator panelDien Ha The
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Siemens catalog hmi-tp27 - 37 touch panelsDien Ha The
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
Tự Động Hóa Siemens,
Catalog Thiết Bị Điện Tự Động Hóa Siemens,
Catalog Phụ Kiện Tự Động Hóa Siemens,
Catalog Tự Động Hóa Siemens,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Tự Động Hóa Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Tự Động Hóa Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Tự Động Hóa Siemens vui lòng gọi: 0907.764.966
"servo motor drive, servo motor drive dealers, servo motor drive dealers in ahmedabad, servo motor drive dealers in gujarat, servo motor drive dealers in india, servo motor drive suppliers, servo motor drive suppliers in ahmedabad, servo motor drive suppliers in gujarat, servo motor drive suppliers in india, servo motor drive distributors, servo motor drive distributors in ahmedabad, servo motor drive distributors in gujarat, servo motor drive distributors in india"
MT50 for LS1024B/ LS2024B/ LS3024B PWM solar controller
Available at http://shop.ultisolar.com
About Ultisolar: Ultisolar is focus on MPPT Controller, PWM Controller, SWH Controller, SWH Station, Hall Flow Sensor
Intelligent Dashboard is a software utility that pulls together data from multiple sources and displays it in a single user interface making it easy for the operator to monitor and manage. Intelligent Dashboard provides a unified graphical platform for the operators to manage and visualization all system alarms. The system also gives the operator the option to view live video feeds of the areas that have an alarm. The system provides maintenance management software and system wide management reports. This system will combine the ZEAG cash management system, Intelligent Parking System, ANPR and CCTV camera system all into one easy to use interface for the Etihad Towers Parking System.
시크 SICK Lector63x 2D DPM스캐너 고정식바코드스캐너 산업용바코드리더 이미지스캐너 매뉴얼HION IT
Lector63x 시리즈 제품군
Lector631
Lector632
2메가픽셀 센서 장착 코드 리더
렌즈 및 필터 디자인의 유연성
교체 가능한 내장형 High-Power 조명
기능 버튼, 레이저 조준 보조장치, 음향 피드백 신호 및 피드백 LED
고분해능 센서와 지능적 처리로 어려운 판독 조건에서도 최고의 판독 성능을 보장합니다.
구성이 유연한 광학 디자인과 고성능 조명으로 고속에서나 판독 거리가 먼 애플리케이션에서도 작은 코드를 판독할 수 있습니다.
직관적 인터페이스, 장치 장착을 신속하게 해주는 기능 버튼, 내장된 조명과 조준 레이저 덕분에 신속하고 용이한 커미셔닝
음향 신호와 물체 위 컬러 피드백 스폿으로 즉각적 결과 점검 가능
microSD 메모리 카드로 간단하게 복제 기능을 활용할 수 있어 생산 라인 장애 시 기계 작동 정지 시간이 감소됨
FEATURES
Focus : Adjustable focus (manually)
Sensor : CMO S matrix sensor, gray scale values
Light source ;
To be ordered separately as accessory
Aiming laser: visible red light (λ = 630 nm ... 680 nm)
Laser class : 1, complies with 21 CFR 1040.10 except for the tolerance according to “Laser Notice No. 50”from June 24, 2007 (IEC 60825-1 (2007-3))
Scanning frequency : ≤ 50 Hz, at 1.9 megapixels resolution
Code resolution : ≥ 0.1 mm 1)
Reading distance : 50 mm ... 2,200 mm
PERFORMANCE
Bar code types : GS1-128 / EAN 128, UPC / GTIN / EAN, Interleaved 2 of 5, Pharmacode, GS1 DataBar, Code 39, Code 128, Codabar, Code 32, Code 93, USPS (Postnet, Planet, USPS4SCB), Australian Post, Dutch KIX Post, Royal Mail, Swedish Post
2D code types : Data Matrix ECC 200, GS1 Data-Matrix, MaxiCode, QR code
Stacked code types : PDF 417
Code qualification : On the basis of ISO/IEC 16022, ISO/IEC 15415, ISO/IEC 18004
INTERFACES
Serial (RS-232, RS-422) ;
Function : Host, AUX
Data transmission rate : 300 Baud ... 115.2 k Baud, AUX: 57.6 kBaud (RS-232)
USB : USB 2.0
Ethernet ;
Function : Host, AUX, image transmission
Data transmission rate : 10/100/1,000 Mbit/s
Protocol : TCP/IP, FTP (image transmission), EtherNet/IP, PROFINET (optional over external fieldbus module CDF 600-2)
CAN bus ;
Function : SICK CAN sensor network (Master/Slave, Multiplexer/Server)
Data transmission rate : 250 kbit/s ... 500 kbit/s
Protocol : CSN (SICK CAN Sensor Network)
PROFIBUS DP : Optional over external fieldbus module (CDF600-2)
Switching inputs : 4 (“Sensor 1”, “Sensor 2”, 2 inputs via optional CMC600 parameter memory in CDB650/CDM 420)
Configurable inputs : Encoder input, external trigger
Switching outputs : 6 (CDB650: “Result 1”, “Result 2”, “Result 3”, “Result 4”, 2 external outputs via CMC600 or CDM420: “Result 1”, “Result 2”, 2 external outputs via CMC600 or cable with open end:“Result 1”, “Result 2”, “Result 3”, “Result 4”)
“device ready”
Reading pulse : Switching inputs, non-powered, serial interface, Ethernet, CAN , auto pulse, presentation mode
Optical indicators : 11 LEDs (5 x status display, 5 x LED bar graph, 1 green/red feedback spot)
Acoustic indicators : Beeper (configurable)
Control elements : 2 buttons
Configuration software : SOPAS ET
Memory card : Micro SD memory card (flash card) max. 32 GB , optional
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
AUDI A4 B5 1.8L 1996 ELECTRICAL EQUIPMENT 01 79 instrument cluster, on board ...Gherghescu Gabriel
AUDI A4 B5 1.8L 1996 ELECTRICAL EQUIPMENT
Similar to Case IH AFS Pro600 AFS Pro700 AFS Field Performer Large Tractors Trip Computer Operator’s Manual Instant Download (Publication No.47369333).pdf (20)
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Case IH AFS Pro600 AFS Pro700 AFS Field Performer Large Tractors Trip Computer Operator’s Manual Instant Download (Publication No.47369333).pdf
1. Part number 47369333
1st edition English
June 2012
SOFTWARE OPERATING GUIDE
SoftwareVersion 27.*
AFS®
Pro 600
AFS®
Pro 700
AFS Field Performer
Large Tractors
Trip Computer
2. Contents
1 GENERAL
Manual scope............................................................................... 1-1
2 ICONS AND WINDOWS
VEHICLE ICONS
Status and warning icons............................................................... 2-1
PERFORMANCE AND VEHICLE WINDOWS
Left-hand area .......................................................................... 2-2
Performance windows .................................................................. 2-3
Vehicle and framework windows ...................................................... 2-17
3 SETUP
REMOTE VALVES
Variable flow controls ................................................................... 3-1
Remote valve timers.................................................................... 3-5
Valve locks.............................................................................. 3-9
IMPLEMENTS AND THE HITCH NOTEBOOK
Implements ............................................................................ 3-11
Hitch notebook ........................................................................ 3-18
TRACTOR SETUP
Driveline settings ...................................................................... 3-26
Slip limit................................................................................ 3-29
Auto PTO settings ..................................................................... 3-30
4 OPERATION
PERFORMANCE APPLICATION
Overview ............................................................................... 4-1
Productivity ............................................................................. 4-4
Performance instant .................................................................... 4-8
Fuel range .............................................................................. 4-9
Performance overall ................................................................... 4-10
Summary screens ..................................................................... 4-13
HEADLAND TURNING SEQUENCES
Introduction ............................................................................ 4-18
Recording a sequence ................................................................ 4-20
Downloading a sequence.............................................................. 4-23
3. Playing a sequence.................................................................... 4-26
Managing sequences.................................................................. 4-28
SERVICE REMINDERS
Maintenance schedule ................................................................ 4-29
Service reminder operation............................................................ 4-33
Sharing the display between vehicles ................................................. 4-37
4.
5. 1 - GENERAL
1 - GENERAL
Manual scope
This manual covers the AFS Field Performer functions for
the large tractor application. The manual assumes that
you have read and understood the contents of the display
manual in preparation for this manual.
Your manuals have changed to a layered approach to
match the layered architecture in your new farming soft-
ware. Each manual builds on the knowledge learned in
the previous manual; the display manual is required read-
ing for this application manual.
This application manual is organized as follows:
• Chapter 2 explains the control and reporting win-
dows available from the Field Performer application
for monitoring productivity and performance during
crop production.
• Chapter 3 explains how to use software features for
the remote valves, rear hitch, Automatic Productivity
Management (APM) and auto-PTO.
• Chapter 4 explains how to use the Field Performer
application to monitor productivity and performance;
how to use the electronic End of Row (EOR) sys-
tem; and how to use the service and maintenance
features.
1-1
7. 2 - ICONS AND WINDOWS
2 - ICONS AND WINDOWS
VEHICLE ICONS
Status and warning icons
The left hand area is visible on all screens and is split
into three areas for your tractor:
• the status icon area (1),
• the horizontal sequence bar used with the electronic
End Of Row (EOR) system (2). See 4-18 for infor-
mation on this feature,
• and the window area providing operator selected
performance information, productivity information or
maps (3).
RCIL09DSP064BAG 1
Six status icons are specific to the large tractor application
and display in the status area when appropriate.
Implement position icons show the
current position of the hitch-mounted
or towed implement. The up arrow
indicates the implement is raised.
The down arrow indicates the
implement is lowered. Implement
position is determined by the
position of the hitch, the position of
the EHR #1 lever or by input from
the implement status switch.
This area control icon flashes
whenever the Area Control ON/OFF
window is set to off. The operator
must turn area control on to
accumulate any area or time data for
the current task.
The roading icon displays whenever
the operator selects on in the Road
Mode window to indicate the vehicle
is roading to or from the field for the
task. The icon disappears whenever
the selection in the Road Mode
window is changed to off.
Service alert icons inform an
operator when scheduled service or
maintenance is approaching. The
icons count down from 10 hours to 1
hour when a service interval is about
to expire.
When service is due, the icon
changes to a flashing service
wrench. See 4-29 for more
information on the icons and the
maintenance functions within the
large tractor application.
2-1
8. 2 - ICONS AND WINDOWS
PERFORMANCE AND VEHICLE WINDOWS
Left-hand area
The arrangement of the windows in the left hand area can
be changed by the operator.
Any single-column window or map which can be placed
on the Run and/or Summary screens can be placed in the
left hand area.
Refer to the display manual and its explanation of the Run
Layout screen in the Toolbox to review window placement
in the left hand area.
RCIL09DSP064BAG 1
2-2
9. 2 - ICONS AND WINDOWS
Performance windows
Home screen
The icons on the home screen organize the screens for
all farming applications by their function.
Any vehicle specific software (for example, autoguidance,
performance, planting, or harvesting software) can add its
components to these navigation icons.
RCIL09DSP090BAG 1
Press the Toolbox icon to access screens for setting dis-
play preferences and operator preferences, for customiz-
ing the Run screens, for setting up the GPS receiver, etc.
The selections vary with the applications installed. The
Toolbox provides the location where shared tools used by
other applications can be configured.
Press the Run icon to access the six user screens for
all applications resident on the display. These are the
screens normally used while operating the equipment.
NOTE: The names for the Run screen navigation icons
cannot be edited.
Press the Diagnostics icon to access screens for check-
ing software revisions, controller status, specific sensor
signals, resource usage, GPS signal status (if equipped),
GPS receiver interface (if equipped), and for checking and
clearing fault codes.
Press the Calibration icon to access the screens for vehi-
cle and application specific calibrations such as distance,
area, crop, steering sensor, etc.
Press the Performance icon to access screens for viewing
the active data set and analyzing operational results.
Press the Data Management icon to access screens for
importing data, filtering data, deleting data, and managing
map items.
Press the Remote Valves icon to access screens for con-
trolling remote valve flow, timers and locks.
2-3
10. 2 - ICONS AND WINDOWS
Press the Work Condition icon to access screens for con-
trolling hitch settings.
Press the Electronic EOR icon to access screens for work-
ing with headland turning sequences.
2-4
11. 2 - ICONS AND WINDOWS
Field Performer windows
The Field Performer windows from the Precision Farming
and Trip Computer applications may be placed on any of
the Run and/or Summary screens or the left hand area as
indicated. Refer to the display manual and its explanation
of the Run Layout screen in the Toolbox to review window
placement.
Area/work control and reporting windows
The Area, Work and Road Control windows determine
how all information is gathered on area and time spent
in work and out of work for the current task. This infor-
mation is used then to calculate fuel economy, power and
productivity.
RCIL09DSP001BAG 2
Area On/Off
Placement label: Area On/Off
Placement location: Run screens or left hand area
The Area On/Off window is used to determine whether
area and time are accumulated for the current task.
DGPS spatial data provides distance and time informa-
tion. Swath width is determined by selecting an Imple-
ment to perform the work. The Area On/Off window then
determines whether work data is accumulated for area
and time reporting windows. This window acts as the
master control for whether production data is accumu-
lated. RCIL09DSP002BAA 3
The Area On/Off window has two
settings: OFF and ON. Press the Area
On/Off window to access the pop-up
options window.
Press the desired option.
When Area On/Off is set to OFF, area and time data are
not accumulated for the current task. When Area On/Off
is set to ON, area and time data is accumulated for the
current task.
RCIL09DSP002BAG 4
2-5
12. 2 - ICONS AND WINDOWS
Work Control
Placement label: Work Control
Placement location: Run screens or left hand area
With the Area On/Off window set to ON, the Work Control
window determines when area and time are accumulated
for the current task.
RCIL09DSP003BAA 5
Work control operates automatically based on the input
from the hitch position sensor, EHR #1 lever position or
the implement status switch. Choose the desired input in
the Implement Type window at Home > Toolbox > Impl.
See 3-11 for information about implement setup.
When the implement is lowered, the Work Control window
will read “ON.” When the implement is raised, the Work
Control window will read “OFF.”
Information is gathered on area and time for the current
task whenever the tractor is moving and one of three
conditions is present:
• "Hitch Implement" is selected for the implement
type, and the hitch is down as sensed by the stan-
dard hitch position sensor,
• "EHR 1 Implement" is selected for the implement
type, and the lever for EHR #1 is in the retract or
float position,
• or the implement status switch, if equipped, indi-
cates the implement is down.
Although the Work Control window has two settings – ON
or OFF – automatic operation begins based on the posi-
tion of the implement, regardless of the current selection
in the window.
RCIL09DSP003BAG 6
With the implement raised, if Area On/Off is turned ON
and work control is turned OFF, data accumulation will
begin when the implement is lowered the first time.
With the implement raised, if Area On/Off is turned ON
and work control is turned ON, data accumulation will be-
gin when the tractor is moved. Automatic operation will
begin the first time the operator lowers and raises the im-
plement.
RCIL09DSP003BAG 7
2-6
13. 2 - ICONS AND WINDOWS
The OFF selection is normally used by the operator to
temporarily stop data accumulation while the implement
is lowered. The may be required to cross a non-arable
section of the field or when driving an overlapping pass.
Press the Work Control window to access the pop-up op-
tions window. Select “OFF” from the option window to
temporarily stop data accumulation. Press the window
again to return work control to automatic operation.
RCPH11DSP100BAG 8
Road Mode
Placement label: Road Mode
Placement location: Run screens or left hand area
The gathered information from the Area On/Off and Work
Control windows is further separated into working time
and distance as opposed to roading time and distance by
use of the Road Mode window.
The Road Mode window is used by the operator to indi-
cate when roading occurs for the current task. The Road
Mode window has two settings: ON or OFF. Based on
this window’s setting, the software tracks the distance and
time spent roading for the current task separately from the
distance and time spent working.
RCIL09DSP005BAG 9
Press the Road Mode window to access
the pop-up options window. Press the
desired option. Select ON while the
tractor is roading. An icon displays in the
Status area to indicate that Road Mode
is ON. Select OFF when the tractor is
not roading.
RCIL09DSP006BAG 10
2-7
14. 2 - ICONS AND WINDOWS
Remote valve lock
Placement label: Lock rem. n
Placement location: Run screens
Use the lock windows to lock and unlock operation of in-
dividual remote vales as required. See 3-9 for more infor-
mation.
RCIL11DSP197BAG 11
Remote valve timer
Placement label: Timer n
Placement location: Run screens
Use the 2 x 1 Timer window to set, enable and disable
extend and retract timer for individual remote valves as
required. See 3-5 for more information.
RCIL11DSP198BAG 12
Area
Placement label: Area
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
accumulated area in hectares or acres for the current task.
The area counter is reset to 0 (zero) when a new task is
created or selected.
On the Summary screens, this window reports accumu-
lated area in hectares or acres for the selected filters:
crop, tag, grower, farm, field and task.
RCIL09DSP007BAG 13
2-8
15. 2 - ICONS AND WINDOWS
Distance
Placement label: Distance
Placement location: Run screens or left hand area
This window reports accumulated distance in kilometers
or miles for the current task. The distance is reset to 0
(zero) when a new task is created.
RCIL09DSP008BAG 14
Distance Counter
Placement label: Distance Counter
Placement location: Run screens or left hand area
This window reports accumulated distance in kilometers
or miles for the desired time interval, e.g. multiple tasks,
daily usage, or weekly usage. The Distance Counter win-
dow is not linked to a particular task.
Press the Distance Counter window to reset the counter.
A confirmation message displays. Press the Yes button
to reset the counter. Press the No button to continue ac-
cumulating distance data.
RAIL12DSP0951BA 15
Distance, Field
Placement label: Distance, Field
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
accumulated distance in kilometers or miles for the current
task.
On the Summary screens, this window reports accumu-
lated distance in kilometers or miles for the selected fil-
ters: crop, tag, grower, farm, field and task.
RCIL09DSP009BAG 16
Distance, Work
Placement label: Distance, Work
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
the total distance spent in work (as opposed to out of work)
for the current task.
On the Summary screens, this window reports the total
distance spent in work (as opposed to out of work) for the
selected filters: crop, tag, grower, farm, field and task.
RCIL09DSP011BAG 17
2-9
16. 2 - ICONS AND WINDOWS
Distance, Road
Placement label: Distance, Road
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
the total distance spent out of work (roading distance) in
kilometers or miles for the current task.
On the Summary screens, this window reports the total
distance spent out of work (roading distance) in kilometers
or miles for the selected filters: crop, tag, grower, farm,
field and task.
RCIL09DSP010BAG 18
Time, Field
Placement label: Time, Field
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
the total time spent in hours and minutes for the current
task.
On the Summary screens, this window reports the total
time spent in hours and minutes for the selected filters:
crop, tag, grower, farm, field and task.
RCIL09DSP013BAG 19
Time, Work
Placement label: Time, Work
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
the total time in hours and minutes spent in work (as op-
posed to out of work) for the current task.
On the Summary screens, this window reports the total
time in hours and minutes spent in work (as opposed to
out of work) for the selected filters: crop, tag, grower,
farm, field and task.
RCIL09DSP014BAG 20
Time, Road
Placement label: Time, Road
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
the total time in hours and minutes spent out of work (road-
ing time) for the current task.
On the Summary screens, this window reports the total
time in hours and minutes spent out of work (roading time)
for the selected filters: crop, tag, grower, farm, field and
task.
RCIL09DSP012BAG 21
2-10
17. 2 - ICONS AND WINDOWS
Work Rate
Placement label: Work Rate
Placement location: Run screens or left hand area
The Work Rate window reports the area worked at this
moment in hectares per hour or acres per hour for the
current task.
RCIL09DSP033BAG 22
Work Rate, Wrk, Avg
Placement label: Work Rate, Wrk, Avg
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
average area worked in hectares per hour or acres per
hour for the current task. The window is reset to 0 (zero)
whenever a new task is selected.
On the Summary screens, this window reports average
area worked in hectares per hour or acres per hour for
the selected filters: crop, tag, grower, farm, field and task.
RCIL09DSP016BAG 23
Work Rate, Fld, Avg
Placement label: Work Rate, Fld, Avg
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
average area, in and out of work, accumulated in hectares
per hour or acres per hour for the current task.
On the Summary screens, this window reports average
area, in and out of work, accumulated in hectares per hour
or acres per hour for the selected filters: crop, tag, grower,
farm, field and task.
RCIL09DSP065BAG 24
Work Speed, Avg
Placement label: Work Speed, Avg
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window re-
ports average speed while in work in kilometers per hour
or miles per hour for the current task.
On the Summary screens, this window reports average
speed while in work for the selected filters: Crop, Tag,
Farm, Field and Task.
RCIL09DSP017BAG 25
2-11
18. 2 - ICONS AND WINDOWS
Fuel usage and economy reporting windows
The area, distance and time information is correlated
against engine power and fuel usage input to produce
the fuel usage and economy windows.
Fuel/Area
Placement label: Fuel/Area
Placement location: Run screens or left hand area
This window reports fuel usage in terms of area: liters per
hectare or gallons per acre at this moment for the current
task.
RCIL09DSP018BAG 26
Fuel/Area, Fld, Avg
Placement label: Fuel/Area, Fld, Avg
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
average fuel usage in terms of area – average liters per
hectare or gallons per acre for the current task.
On the Summary screens, this window reports average
fuel usage in terms of area – average liters per hectare or
gallons per acre for the selected filters: crop, tag, grower,
farm, field and task.
RCIL09DSP019BAG 27
Fuel/Distance
Placement label: Fuel/Dist
Placement location: Run screens or left hand area
This window reports fuel usage in terms of distance: kilo-
meters per liter or miles per gallon at this moment for the
current task.
RCIL09DSP020BAG 28
2-12
19. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
20. 2 - ICONS AND WINDOWS
Fuel/Dist, Fld, Avg
Placement label: Fuel/Dist, Fld, Avg
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
average fuel usage in terms of distance – average kilome-
ters per liter or miles per gallon for the current task.
On the Summary screens, this window reports average
fuel usage in terms of distance – average kilometers per
liter or miles per gallon for the selected filters: crop, tag,
grower, farm, field and task.
RCIL09DSP021BAG 29
Fuel Economy
Placement label: Fuel, Econ
Placement location: Run screens or left hand area
This window reports fuel economy in terms of power: kilo-
watt hour per liter or horsepower hour per gallon at this
moment for the current task.
RCIL09DSP022BAG 30
Fuel Econ, Fld, Avg
Placement label: Fuel, Econ, Fld, Avg
Placement location: Run and Summary screens or left
hand area
On the Run screens or left hand area, this window reports
average fuel economy in terms of power – average kilo-
watt hours per liter or horsepower hours per gallon for the
current task.
On the Summary screens, this window reports average
fuel economy in terms of power – average kilowatt hours
per liter or horsepower hours per gallon for the selected
filters: crop, tag, grower, farm, field and task. RCIL09DSP023BAG 31
Fuel/Hour
Placement label: Fuel/Hour
Placement location: Run screens or left hand area
This window reports fuel usage, based on data from the
engine controller, in liters per hour or gallons per hour at
this moment for the current task.
RCIL09DSP024BAG 32
2-13