Carlos Zamora has over 15 years of experience in the oil and natural gas industry, currently working as the Manager of Cathodic Protection for Texas Gas Service Company. He is responsible for safety, training, budgets, audits, and overseeing contractors. Previously he worked as the Supervisor of System Protection, managing pipeline inspection and protection programs. He has a background in measurement analysis and purchasing.

1. 6943 Red Cedar
Brownsville, TX
78526
Phone: 956-525-0775
carlchiv@msn.com
Specialties
Promoting a Safe
Culture.
Pipeline Integrity
Gas Control
DCVG/CIS
Measurement
Maximo/ERP
Engineering
Tools
Microsoft office
applications
NACE
MS Project
DCVG/CIS
Maximo
Advantica
Flow-Cal
Carlos Zamora
Manager and Leader in the Oil & Natural Gas Industry
 Manager/Supervisor with more than eleven years of experience in the
management for Natural Gas Pipeline projects.
Professional Experience
TEXAS GAS SERVICE COMPANY; STATEWIDE,TX
Manager Cathodic Protection, 1/13 to Present
 Responsible for development, forecast and management for Capital and
O&M Budget for Cathodic Protection Statewide. Managed O&M and
Capital budget for the State of Texas of approx. 7 million per year.
 Responsible for safety, training, development and motivation for twenty CP
Technicians and three CP Supervisors.
 Responsible for managing daily tasks and job orders for company
approved contractors
 Responsibly for responding to T RRC and internal audits findings and
ensuring that correction actions are implemented.
 Experienced researching, identifying, evaluating, and prioritizing
operational problems or situations and determining appropriate
action/response.
 Experienced researching and preparing project material and design
specifications, contracts, agreements, budgets, and various reports, forms,
and correspondence.
TEXAS GAS SERVICE A DIVISION OF ONEOK; HARLINGEN, TX
Supervisor System Protection 11/10 to 1/13
 Managed all field aspects of the PC& M for distribution and transmissions
systems. Approximately 315 miles of transmission and 2000 miles of
distribution. These included ensuing all annual inspections for relief,
valves, regulators and meters where inspected in an annual basis.
 Responsible for daily operations in Cathodic Protection, Leak Survey and
Excavation Monitoring.
 Coordinated DCVG/CIS projects prior to hydro tests and also reviewed
the DCVG/CIS data for possible Dig up Recommendations.
 Managed O&M and Capital Budget of approx. $ 2 million per year.
 Prepared Gas Control MOC for blow downs on a particular pipe.
 Represent TGS with the RRC during State audits for the System Protection
department.
 Coordinated with internal and external departments on special projects like
meter, valve and regulator replacements.
 Demonstrated ability to supervise, direct, and/or delegate work
assignments. Knowledge of personnel policies and procedures.
 Experienced developing information and making presentations to groups
and individuals on safety topics and company procedures.

2. TEXAS GAS SERVICE A DIVISION OF ONEOK; HARLINGEN, TX
Measurement Analyst, 08/04 to 11/10
 Analyze measurement system process and initiate any necessary
improvements for processing volumetric data, increasing customer
satisfaction, and/or reducing costs. Coordinate activitiesas needed to
complete improvements.
 Publish reports from different data sources for internal analysis and
continuous process improvement.
 Assure that data has been entered into measurement system accurately
from field activities and from third-party measurement. Provide support
for audits to assure compliance with Gas Information System Board (GISB)
regulations.
 Respond to and resolve questions from customers, regulatory agencies,
third party integrators, auditors, employees, and others regarding various
measurement activities, such as transmission of data and volumetric
reports, in a timely and accurate manner.
 Perform gain/loss balance reports on different pipeline and distribution
segments.
 Investigate and resolve gain/loss balance anomalies on the transmission
and distribution system.
RICH SEA PACK; Brownsville, TX
Purchasing, 07/03 to 08/04
 Responsible for purchasing tools and equipment for a food processing
plant.
 Responsible for establishing relationships and communications with
vendors.
 Managed and Purchase Order system for a food processing Company.
Education
TEXAS UTB, Brownsville, TX
Bachelor of Applied Arts and Sciences in Workforce Management 2010
TSTC, Harlingen TX
A.A.S Electro Mechanical Technology 2003
Awards
Professional Recognition: NACE CP1 Certification 2013
Guest Speaker at the TGA conference in 2015 in Galveston and San Marcos
Texas, topic in Atmospheric Corrosion.
LinkedIn
https://www.linkedin.com/in/carlos-zamora-870293113
Carlos Zamora