The document outlines plans to design a field-scale research facility to study the effects of sea level rise on freshwater bottomland hardwood forests. It discusses selecting a site location within an existing forested wetland and designing the facility to manipulate water levels and mimic predicted tidal influences from rising sea levels. Literature on site hydrology, tidal patterns, and previous mesocosm experiments is reviewed to inform the design. Methods, preliminary results of modeling water flows and site layout, and cost estimates are provided. The goal is to gain critical data on vegetation, soil, and hydrologic responses to help improve models of how ecosystem services may be impacted by climate change.
This presentation talks about the impact on global water resources caused by climate change.
Presentation prepared with the help of Neha Rathi, a volunteer at India Water Portal.
This presentation talks about the impact on global water resources caused by climate change.
Presentation prepared with the help of Neha Rathi, a volunteer at India Water Portal.
Why you should (or shouldn't) hire me; a personal pitch deckJean-Guy Rouleau
This is my personal pitch deck, a visual and more personal replacement for a traditional (boring) resume/CV. I still have one of those old things, and there's a link at the end of the deck.
Sure, you can go ahead and scroll straight through to the end, but why not stop along the way and get to know me a little?
Thanks for stopping by, and have a wonderful day!
II WORKSHOP INTERNACIONAL: GESTÃO SUSTENTÁVEL DE RECURSOS HÍDRICOS NA AGRICULTURA IRRIGADA:
Pesquisa, Políticas Públicas, Extensão Rural e Participação dos Agricultores do Nebraska, USA e do Oeste da Bahia, Brasil
AUDITÓRIO AIBA - BARREIRAS, BA
The Development of a Catchment Management Modelling System for the Googong Re...GavanThomas
A scenario assessment model to assist the end-user in determining priorities for a series of agreed management prescriptions that can be enacted through controls on existing landuse
Modeling the Effects of Land Use Change on FloodingAdam Nayak
Due to population growth, urban areas in Oregon have been expanding, leading to increases in impervious surfaces and net losses in wetlands, riparian vegetation, and forestation in the Northwest. Utilizing ArcGIS and NOAA’s C-CAP imagery, this study classifies and analyzes urban land use changes between 1996 and 2010. These findings shed light on the importance of land use management in urban settings and are being used by local watershed councils to advocate for changes within their stream basins.
Bioswales are a naturally inspired alternative to manage stormwater and runoff from roads and parking lots. The bioswale is a vegetated ditch, trench, or plant bed that absorbs roadway pollutants and oils using plant vegetation. This allows for a decreased runoff and less harmful effluent to be sent downstream to be treated further. This project investigated what they are and how one could be integrated into Clemson's campus. This project increased my passion for using natural systems to accomplish a known goal and my collaboration skills and ability as a presenter. I could better pinpoint an issue and apply my knowledge gained in research and completing this project.
Numerical modeling in support of the characterization and remediation of impacted sediments can be a challenging task, particularly in environments where multiple physical processes influence sediment fate and transport. The interaction of various controls is particularly complex in estuarine settings, where riverine input, water levels, waves, and other coastal processes combine to create a seasonally dynamic environment. Modeling of such environments requires a comprehensive and integrated approach such that the effects of each process can be assessed individually, as these processes can be allowed to interact to reproduce the natural environment as faithfully as possible
Approach and Activities
This contribution describes the development and calibration of an integrated Delft3D numerical model that includes flow, sediment transport, wave processes, and vegetation. The model boundary conditions are based on data collected during a comprehensive field program. Field data were also used to calibrate various model input parameters (such as bed and vegetation roughness). The model was used to understand erosion and deposition during both low and high flow regimes, and thus to aid in understanding important controls on sedimentary dynamics during these predominant regimes.
Results and Lessons Learned
The integrated numerical model predictions capture important sedimentation, erosion, velocity, and water level patterns. Model predictions indicate that during periods of low riverine input, velocity patterns and sediment transport associated with periodic water level changes dominate. During riverine flood conditions flow and sedimentation patterns are controlled by the river itself. Integrated modeling of this setting, including calibration to field data provides a valuable tool for assessment of future conditions, and thus for remediating impacted sediments.
Why you should (or shouldn't) hire me; a personal pitch deckJean-Guy Rouleau
This is my personal pitch deck, a visual and more personal replacement for a traditional (boring) resume/CV. I still have one of those old things, and there's a link at the end of the deck.
Sure, you can go ahead and scroll straight through to the end, but why not stop along the way and get to know me a little?
Thanks for stopping by, and have a wonderful day!
II WORKSHOP INTERNACIONAL: GESTÃO SUSTENTÁVEL DE RECURSOS HÍDRICOS NA AGRICULTURA IRRIGADA:
Pesquisa, Políticas Públicas, Extensão Rural e Participação dos Agricultores do Nebraska, USA e do Oeste da Bahia, Brasil
AUDITÓRIO AIBA - BARREIRAS, BA
The Development of a Catchment Management Modelling System for the Googong Re...GavanThomas
A scenario assessment model to assist the end-user in determining priorities for a series of agreed management prescriptions that can be enacted through controls on existing landuse
Modeling the Effects of Land Use Change on FloodingAdam Nayak
Due to population growth, urban areas in Oregon have been expanding, leading to increases in impervious surfaces and net losses in wetlands, riparian vegetation, and forestation in the Northwest. Utilizing ArcGIS and NOAA’s C-CAP imagery, this study classifies and analyzes urban land use changes between 1996 and 2010. These findings shed light on the importance of land use management in urban settings and are being used by local watershed councils to advocate for changes within their stream basins.
Bioswales are a naturally inspired alternative to manage stormwater and runoff from roads and parking lots. The bioswale is a vegetated ditch, trench, or plant bed that absorbs roadway pollutants and oils using plant vegetation. This allows for a decreased runoff and less harmful effluent to be sent downstream to be treated further. This project investigated what they are and how one could be integrated into Clemson's campus. This project increased my passion for using natural systems to accomplish a known goal and my collaboration skills and ability as a presenter. I could better pinpoint an issue and apply my knowledge gained in research and completing this project.
Numerical modeling in support of the characterization and remediation of impacted sediments can be a challenging task, particularly in environments where multiple physical processes influence sediment fate and transport. The interaction of various controls is particularly complex in estuarine settings, where riverine input, water levels, waves, and other coastal processes combine to create a seasonally dynamic environment. Modeling of such environments requires a comprehensive and integrated approach such that the effects of each process can be assessed individually, as these processes can be allowed to interact to reproduce the natural environment as faithfully as possible
Approach and Activities
This contribution describes the development and calibration of an integrated Delft3D numerical model that includes flow, sediment transport, wave processes, and vegetation. The model boundary conditions are based on data collected during a comprehensive field program. Field data were also used to calibrate various model input parameters (such as bed and vegetation roughness). The model was used to understand erosion and deposition during both low and high flow regimes, and thus to aid in understanding important controls on sedimentary dynamics during these predominant regimes.
Results and Lessons Learned
The integrated numerical model predictions capture important sedimentation, erosion, velocity, and water level patterns. Model predictions indicate that during periods of low riverine input, velocity patterns and sediment transport associated with periodic water level changes dominate. During riverine flood conditions flow and sedimentation patterns are controlled by the river itself. Integrated modeling of this setting, including calibration to field data provides a valuable tool for assessment of future conditions, and thus for remediating impacted sediments.
Catchment Water Quality Management | eWater.com.aueWater
Source Catchments is a water quality and quantity modelling framework that supports decision making and a whole-of-catchment modelling approach. It is designed to help natural resource managers and consultants develop targets, prioritize improvement programs and measure the effectiveness of a broad range of catchment management activities.
The software provides a framework for modelling the amounts of water and contaminants flowing though a catchment and into major rivers, wetlands, lakes, or estuaries. Source Catchments integrates an array of models, data, and knowledge that can be used to simulate how climate and catchment variables (like rainfall, evaporation, land use, vegetation) affect runoff, sediment and contaminants.
Visit http://www.eWater.com.au for more information
Water resources planning: Stages in water resources planning, data collection and processing, estimation of future water demands, preliminary planning, institutional set-up, public involvement, formulation and screening of alternatives, models for water resources planning, sensitivity analysis, Environmental and social considerations: Water in environment, environmental impact of water resources projects, environmental impact of reservoirs, environmental problems in command areas.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
1. Development of a Field-Scale Research Facility to Assess the
Effects of Sea Level Rise on Freshwater
Bottomland Hardwood Forests
Hudson Adams, Riley Garvey, Alyssa Knight, Rachel Mordovancey,
Mattie Rourk, Alexa Schiazza
Clemson University, Clemson, SC
December 1, 2020
4. Background
Role of Wetlands
● Wetlands provide many important ecosystem services
○ Improving and protecting water quality
○ Providing fish and wildlife habitats
○ Storing floodwater
● Wetlands are some of the most productive ecosystems
● The overall global wetland value was estimated to be around
47.4 trillion dollars per year
5. Background
Climate Impact on Wetlands
● Climate change, and the resulting sea level rise, affect the health and
functionality of tidal wetlands.
● Sea level rise causes the inundation and potential displacement of these
areas.
● Such stressors may disassemble the existing ecosystem of the wetland due
to loss of vegetation, loss of habitat, and biogeochemical changes in the
soil.
● Wetlands offer valuable ecosystem services such as erosion control,
bioremediation, and flood protection.
● It is important to be able to predict how these services and ecosystems will
be impacted as sea levels rise.
7. Background
Project Scope
● Freshwater tidal wetlands are wetlands that are influenced by the tides but
do not suffer from saltwater intrusion.
● In the lowlands of South Carolina these are both common and more distant
from the coastline than expected in other areas due to the extremely
gradual elevation changes.
● There are two types of freshwater tidal wetlands, marsh and forest, with
the differences occurring due to the hydroperiod, or the period of time the
wetland is covered by water.
● Ecosystem services can be negatively impacted by environmental/climate
change, therefore it is important to monitor these changes.
9. Rationale
● The purpose of this project is to design a facility that shows how wetlands will respond
to expected future sea-level rise. Wetlands provide many ecosystem services such as
improving water quality and storing flood water. If rising sea level affects the way these
wetlands currently function, then we may lose some of those services.
● The models currently used to predict how ecosystem services will be affected by climate
change are not useful for this project, as freshwater tidal wetlands have not been
adequately studied.
● The idea to address this problem is to take a mesocosm that represents the larger
wetland, and manipulate its water level to gain critical data on which to base future
models.
● It was decided that a field research facility would more easily bring together all of the
biogeochemical features that are endemic to a wetland. Replicating these interworking
features in a lab facility would have been more costly and less representative of the
wetland.
10. Hypothesis to be tested through the use of the
designed facility:
As sea level rises and
hydroperiods change, these
wetlands will shift in type and
previously nontidal wetlands will
become tidally influenced.
11. Objectives
Mission
Design and model a field scale research facility to study the impact of
climate change on the ecosystem services provided by wetlands, in
particular, to determine the effects of sea level rise on the hydrologic regime
and biological makeup of a freshwater tidal wetland.
Specific Objectives
1. To design impoundment/control water structures and drainage
systems
2. To develop an operational plan
3. To develop a site plan for research site
12. Client Deliverables
1. Hydrogeomorphic Assessment – this is an integrated assessment of the land
resource data providing a basis for the site selection
a. A detailed analysis of the natural and man-made subcatchments within the
floodplain that could be the mesocosms. This analysis will focus on utilizing
the lidar data to delineate drainage areas and flow paths within the
floodplain.
b. This analysis will consider the current flow paths and hydrologic regimes.
2. Summary on the expected impacts of sea-level rise on the current hydrologic
regime
3. Facility Operational Plan
4. Site Plan
14. Task 1: To determine a site location
Sub-Tasks:
● To collect hydrological, Lidar, climate, and GIS data for the possible sites.
● To assess references, data, and similar project designs.
● To research sea-level rise modelling done by NOAA or another agency in the
Charleston area.
● To explore water containment and management methods for both options.
● To determine biodiversity of local flora within each option.
● To identify size requirements and necessary site boundaries for both
options.
● To choose an alternative to move forward into design.
15. Approaches
Site Option 1: Tidally Influenced Sub-Catchment Channel
● Put a weir in “Channel A” to divert
water to “Channel B”
● Put berm at tidally influenced
intersection of “Channel B”
● Use main channel water to flood
“Channel B” area
Site Plan Site Map
17. Approaches
Site Option 2: Non-Tidal Controlled Rice Fields
● Retrofit existing berms in rice field
plot
● Install a pump from Nicholson
Creek to the chosen rice field plot
● Construct a weir on the opposite
site of the rice field to let water
escape when necessary
Site Plan Site Map
19. Task 2: To design a facility
Sub-Tasks:
● To evaluate site planning considerations including site access, elevation, and wetland
impact.
● To examine possible methods of passive flow/filling.
● To identify needs to maintain a healthy ecosystem such as water retention rate.
● To determine what additional infrastructure such as water control structures, pipe
networks, pumps, and drainage systems will be required.
● To model hydrologic regimes and design plans by utilizing CAD, HEC-RAS, and SOLIDWORKS.
● To create a design plan draft.
● To develop a final site plan.
● To formulate a facility operations plan by determining how the water control system will
run.
● To assess the cost of the designed field research facility.
20. Pre-/post-development
modeling and structural
drawings
Developing tidal
regime and
operational plans
CAD site
development
Task Management
Team
We collaborated as a group on all aspects of
the project. To ensure that everything got
done, each group member was assigned a
different task to be in charge of:
● Hudson Adams
○ Structural Drawings using
SolidWorks
● Riley Garvey
○ Pre-development modeling using
HEC-RAS
● Mattie Rourk
○ Operational Plans
○ Literature Review
● Alyssa Knight
○ Developing tidal regime
○ Post-development modeling using
HEC-RAS
● Rachel Mordavancy
○ Site development using CAD
● Alexa Schiazza
○ PowerPoint Format
23. Literature Review
Site Hydrology
● Most of the soils have high surface runoff and low infiltration
rates.
● Average annual rainfall: 1370 mm
● The peak discharges for the Turkey Creek watershed:
○ 12.0 m3/s--2 year return period
○ 22.9 m3/s--5 year return period
○ 31.5 m3/s--10 year return period
○ 42.9 m3/s--25 year return period
○ 53.2 m3/s--50 year return period
○ 64.2 m3/s--100 year return period
● Vegetation: pine-hardwood forests.
● The area in the watershed lies 2 m-14 m above sea level.
24. Literature Review
Parameters
● Going forward with the design, the research parameters that the facility will be used
for are:
○ Vegetation response
■ which will monitor changes in vegetation structure, composition, and
productivity including photosynthesis and transpiration
○ Soil response
■ which will monitor changes in soil biogeochemistry such as redox
conditions, greenhouse gas emissions, carbon storage, nutrient cycling,
also soil microbiology
○ Hydrologic response
■ which will monitor changes in hydrology and water quality
25. Literature Review
Turkey Creek Water Table Data
We will use Turkey Creek
data in order to estimate
Nicholson Creek flows off a
relative size comparison
since they are both type 3
streams
26. Literature Review
Tidal Information
● High tide and low tide alternate
approximately every 6 hours each day
● Tides shift back about an hour every day
○ Example: 6:30 one day, and 7:30 the
next, etc.
● Estimate timing and inflow and outflow
rates based on Huger Creek tidal data
27. Literature Review
Sea Level Rise
How high should the water be
raised?
● The relative sea-level rise trend
in Charleston, SC is about 3.32
mm/year based on monthly
mean sea level data spanning
from 1901 to 2019.
● This was determined to be the
equivalent to a 1.09 ft sea level
rise over the span of 100 years.
29. Literature Review
Mesocosm vs. Large-Scale Experiment
Large Scale Experiment:
● Displayed an increase in
temperature over time.
● An increase in dissolved oxygen
over time.
● Larger scale experiments are
harder to control.
Mesocosm Experiment:
● Became colonized by macrophytes
which caused shading.
○ Lower temperature over time.
● Mesocosms are often more
optimal as they are more
replicable and repeatable.
Both:
● Retain nutrients.
● Showed an increase in pH.
32. Materials and Methods
Modeling
● To create location and watershed basin maps of the site using ArcGIS
● To measure site hydrologic features, specifically raised water levels, using HEC-RAS
● For site design and plan set development will be created using AutoCAD Civil3D
● To design and model hydraulic structures, such as a weir structure, using SolidWorks
33. Materials and Methods
Site Needs
● Existing Conditions Evaluation
● Grading Needs (Fill Soils)
● Pump
● Hydraulic Structure: Weir
● Site Access Stair
● Electrical Instrumentation (Beyond Scope of Design)
36. Results
Site Existing Conditions Utilizing Lidar Data
● Elevation data for the site was acquired from NOAA as a lidar point cloud.
○ Utilized in GIS and HEC-RAS as a DEM
○ Utilized in C3D as a dynamic TIN Surface
38. Results
Pre-Development Flow Model Utilizing HEC-RAS
● 1-year rain event
● Rice fields are naturally
flooded from large storm
events
○ after 3 hours of this
storm, the average water
depth on the site was 22
cm
● Berms are partially inundated
- creating the need for
increased height and proper
grading
39. Results
Grading Utilizing C3D
● Utilized C3D’s Feature Lines and Grading Creation Tools
● Created new design surfaces by pasting grading data into the
existing ground surface.
40. Results
Berm Grading Utilizing C3D
● Due to the deteriorated condition
of the berms, reinforcement and a
raised height is required.
● Berms will be 3’ top width with a
3:1 slope down to the existing
grade.
41. Results
Post-Development Flow Model Utilizing HEC-RAS
● Simulating 1 foot of sea level
rise
● The pump creates an inflow
to raise the water level to 1 ft
in a 6 hour period to reach
high tide
● The gate opens and releases
water to empty the field over
a 6 hour period to reach low
tide
43. Results
Flow Rate Estimation
● The flow rate was determined using the equation Q = V/t
● The volume was determined to be 64,984.33ft3 based on the area
calculated through CAD modeling and a 1 foot depth with a 3:1 slope on all
sides.
● The time was set to equal 21,600s in order to match a tidal regime of 6
hours.
● The flow rate was found to be 3.01cfs or 1350 GPM
44. Results
Spillway Grading Utilizing C3D
● The spillway is
designed to retain
the low tide water
level while the
hydraulic weir will
hold the high tide.
● 3:1 slope down
from berms and
2% down the
spillway through
the berms
45. Results
Spillway Stabilization
● Major storm events can lead to concentrated
runoff that can erode the spillway.
● Erosion can be prevented using:
○ Protective grass vegetation
○ An appropriately designed rock cover
○ Concrete or other erosion control
matting
● After major storm events, compacted soil
can be placed in the eroded spillway to
restore the normal embankment.
46. Results
Pump Station Location
● Because the site is
located in the
Nicholson Creek
flood plain, the pump
cannot be placed
within the wetland
area.
● The station will be
located off of
Summerhouse Road
adjacent to
Nicholson Creek
47. Results
Pump Station Site
Grading Utilizing AutoCAD
● The road grade will be extended by
15’ to provide a 15’ ⨯ 15’ flat surface
in order to place the pump station.
● Graded to the existing ground at 3:1
slope
48. Results
Cost Assessment-Grading
● A volume comparison surface was
created from the existing and modeled
future ground.
● The net fill volume was calculated to be
950.17 yd3
● At an estimated $20 per yd3, the total
cost of the fill soils would be
approximately $19,004.
49. Results
Pipe Alignment Utilizing AutoCAD
● HDPE pressure pipe will
be utilized to pump
water from Nicholson
Creek to the rice field
plot.
50. Results -Pipe Alignment Profile Utilizing AutoCAD
● In order to avoid the
ecological impact of
burying the pipe, it will
be run over the ground
on stilts supported by
pylons
● Because of the warm
climate of Huger, SC,
temperature related
deflections of the pipe
are of minimal concern.
● The pylons will be
supported with
compacted fill material.
51. Results
Pump Sizing
● Hazen Williams Equation:
Friction Losses
○ Flow Rate= 1350 gpm
○ Friction Coefficient, C=150
○ Suction Side:
■ 44 Linear Feet (LF)
of 8” pipe.
■ Equivalent Length of
62 LF
○ Discharge Side:
■ 351 LF of 6” pipe
■ Equivalent Length of
404.5 LF
Total Friction Losses in Suction
Side = 1.52 ft
Total Friction Losses in
Discharge Side = 40.3 ft
Increases in friction from the fittings are
accounted for in “Effective Pipeline Length”
or equivalent length of pipe based on the
predetermined K factor for the fitting.
● LE=(K’)(D)
● Project Pipeline includes:
○ 2 - 90° Elbows
○ 2 - 45° Elbow
○ 2 - 15° Elbows
● LE(suction)= 18 LF
● LE(discharge)= 53.5LF
52. Results
Pump Sizing
● Total Dynamic Head (TDH):
○ Equivalent height of the fluid to be pumped.
○ Determined by head loss changes in the pipe.
● Total Dynamic Suction Lift = 10.52 ft
○ 1.52 ft of friction loss
○ 9 ft of suction lift head loss
● Total Dynamic Discharge Head = 34.3 ft
○ 40.3 ft of friction loss
○ 6 ft of elevation head gain
TDH = 44.82 ft
53. Results
Pump Sizing
● The Net Positive Suction Head
Available (NPSHA) is used to ensure
the pump picked and its Net
Positive Suction Head Required
(NPSHR) at the desired flow rate is
suitable for the system.
● Suction Lift Head: 9 ft
● Absolute Pressure: 34 ft
● Vapor Pressure: 1.06 ft
● Friction Loss In Suction Lift: 1.52 ft
NPSHA=22.21 ft
55. Results
Pump Selection
● At 1350 GPM and 44.8 ft TDH, a
Xylem e-XC Suction Split Case
Pump was chosen.
○ 8 1/16” Radial Impeller
○ 20 HP Baldor Motor
○ NPSHR = 15.3 ft
57. Results
Pumping Considerations
● Because there is 44 LF of suction
lift, a priming system should be
considered.
● Loss of prime can cause gas
accumulation to block flow in the
pump and lead to damage
● A priming valve would place the
suction line under vacuum and
relocate the lowest point of
pressure to the pump.
● This allows water to rise in the
suction line and maintain a primed
pump.
58. Results
Cost Assessment-Pump and Piping
● 351 LF of 6” HDPE Pipe
○ $8.50 /LF
■ $2,984
● 44 LF of 8” HDPE Pressure Pipe
○ $12 /LF
■ $528
● 6” Elbow Fittings (2):
○ $194 /Ea
■ $388
● 8” Elbow Fittings (4):
○ $500 /Ea
■ $2,000
● Xylem Pump with motor and baseplate assembly
○ Includes freight and startup
■ $25,000
● Q-VAC Priming Valve System
■ $50,000
● Pump RVSS Control Panel
■ $50,000
59. Results
Hydraulic Design Utilizing SolidWorks
● Using the equation for
determining the flow rate of
a rectangular contracted weir
the length of the weir was
calculated.
● Q was set to be 3.01cfs as
found solving for the flow
rate
● H was set to be 1 ft to match
with the expected rise in the
water level of the wetland.
● The length was found to be
approximately 1 ft
60. Results
Hydraulic Design Utilizing SolidWorks
● Design includes a gate on the weir
that is operated by a rack and
pinion system powered by a small
motor
● The gate will be operated on a time
schedule to simulate the coming
and going of the tide each day
● Motor will be mounted on top of
the frame
● A ½ horse power motor is a cheap
and efficient way to operate the
door and should be more than
strong enough to function properly
61. Results
Rack and Pinion System
● Pros: Easy to design, easy to
maintain
● Cons: If the rack is misaligned
it may damage the entire
gear box, Can be inaccurate if
a higher quality is not bought
and maintained but this is
not an issue for this project.
62. Results
Cost Assessment-Hydraulic Design
● ½ horsepower motor: ~$100.00
● Rack and Pinion: ~$75.00
● 4 inch square tubing: ~$90.00
● 12x18 1” sheet metal: ~$120.00 x 2
● Weir Structure: ~$2000.00
● Total Cost: ~$2,505
63. Results
Operational Plan: Facility Use
● Simulated high tide will occur when the water within the rice field reaches a height of 1ft.
● Simulated low tide will occur when the rice field has been completely drained of water (~0ft).
● Low tide and high tide will alternate every 6 hours based on tidal information.
○ Low tide: 9AM, 9PM
○ High tide: 3PM, 3AM
● Water addition will occur immediately following low tide
● Drainage will occur immediately following high tide
● Water will be pumped into the rice field and flow out of the rice field through the weir at the
same rate.
○ Flow Rate: 3.01 cfs
64. Results
Operational Plan: Maintenance
Rack and Pinion System:
● Maintenance once every 4 weeks
(about once a month)
● Lubricate rack and pinion
Pump:
● Maintenance once every 4 weeks
(about once a month)
● Clean the system
● Check during winter months for
freezing possibility
○ On days when temperature
drops below freezing, do not
turn pump on
Spillway:
● Regularly monitor spillway for
weeds, brush, or obstructions
● Check spillway after major storm
events to repair erosion
65. Results
Cost Assessment-Labor
Team Members:
Alexa, Alyssa, Hudson, Mattie, Rachel, and Riley
Pre-/post-development
modeling and structural
drawings
Developing tidal
regime and
operational plans
Team
CAD site
development
Task Hours
Meetings 210
PowerPoint 162
Paper 40
Operational Plan 8
Statistics 2
Calculations 10
SolidWorks 12
GIS/AutoCAD 27
HEC-RAS (pre + post) 20
Total Hours 81 hours / person
Total Cost $8,100 / person
68. Recommendations
● We recommend implementing site option 2 - non-tidal controlled rice fields
for the research facility, based on the criteria outlined in the results section
as well as field observations
● We recommend using a Xylem e-XC Suction Split Case pump
● We recommend utilizing a gate with a rack and pinion system on the weir
69. Recommendations
● We recommend modeling the design on EPA-SWMM, instead of HEC-RAS
● We recommend operating the system on a 6 hour tidal schedule
● We recommend servicing the pump and rack and pinion system once a
month
● We recommend turning off the system during freezing temperatures
71. Acknowledgements
Sincerely,
Alexa, Alyssa, Hudson, Mattie,
Rachel, and Riley
Dr. Darnault,
Thank you for guiding us throughout this
project and giving us helpful feedback
on our presentation and paper.
Dr. Xiao,
Thank you for your help throughout the
project process and giving us helpful
feedback about our powerpoint.
Dr. Trettin,
Thank you for giving us the opportunity to
work alongside you to develop a field-scale
research facility to observe the effects
global warming, specifically sea level rise,
has on bottomland hardwood forests. We
hope this project helps you and the USDA
Forestry service devise a plan to
implement in the future.
Julie,
Thank you for showing us around both the
tidally influenced sub-catchment channel,
and the non-tidal controlled rice fields.
This site visit was extremely helpful in the
completion of our project design.
RILEY
GOOD AFTERNOON
Thank you all for being here today and thank you in particular to Dr. Darnault and Dr. Xiao for hosting this event.
My name is
We are only reading (word for word) rationale, objectives, and approaches (esp. tasks). Everything else can be paraphrased
“Our Capstone Design is on..”
Good Afternoon
RILEY
Dar-notes: Don’t deviate from the template he gave us - especially with the outline
Introduce critically
Just generally follow the template to a T
HUDSON
HUDSON
Bring more number/figures into background
Another slide about role of wetlands before this
Then one about climate change impact on wetlands
World map of wetlands, map of SC wetlands
Go broader - give more of an outline of the impact of this project and the reason for its conception
Put a dollar amount on ecosystem services to show how high their value is
Use this to show why this facility will be impactful
UPLOAD THE FLIPPIN FILES TO BOX
HUDSON
World map of wetlands, map of SC wetlands
Go broader - give more of an outline of the impact of this project and the reason for its conception
Put a dollar amount on ecosystem services to show how high their value is
Use this to show why this facility will be impactful
UPLOAD THE FLIPPIN FILES TO BOX
ALYSSA
ALYSSA
ALYSSA
RILEY
The purpose of this project is to design a facility that shows how wetlands will respond to expected future sea-level rise. Wetlands provide many ecosystem services (as hudson and alyssa mentioned) such as improving water quality and storing flood water. If rising sea level affects the way these wetlands currently function, then we may lose some of those services.
Additionally, The models currently used to predict how ecosystem services will be affected by climate change are not useful for this project, as freshwater tidal wetlands have not been adequately studied.
The idea to address this problem is to take a mesocosm that represents the larger wetland, and manipulate its water level to gain critical data on which to base future models.
Moreover, It was decided that a field research facility would more easily bring together all of the biogeochemical features that are endemic to a wetland. Replicating these interworking features in a lab facility would have been more costly and less representative of the wetland.
RILEY
In the image to the right, you can get an idea of how wetlands are typically influenced by the tide. What we expect is that sea-level rise will move that dotted line that says “limit of tidal influence” further inland into the non-tidal freshwater marsh.
And we are looking to create a facility that addresses how that new tidal influence affects the makeup of that wetland.
RILEY
Our mission is to Design and model a field scale research facility to study the impact of climate change on the ecosystem services provided by wetlands, in particular, to determine the effects of sea level rise on the hydrologic regime and biological makeup of a freshwater tidal wetland.
RILEY
Don’t include deliverables with objectives→ make its own slide
NOt objectives - just deliverables
DON’T SAY “JUST”
Either have the slide and show all of these things at the end, or don’t include this slide
ALEXA
ALEXA
Get rid of “tasks” in the heading - or say “task” and “sub-task”
Tasks are what you use to meet the objectives
Subtasks under objectives
Make title objective 1, and then the tasks
Approaches-->big tasks-->small tasks
ALEXA
Add channel A and B labels
ALEXA
ALYSSA
ALYSSA
“Retrofit” instead of “rehab” because Rachel is an idiot (Suck it Riley)
Bring site map onto this slide and show where these pictures are from on the map - do same for channels
ALYSSA
Add periods at the end of every sentence
Add the word CAD
To model/design ___ using cad….
HUDSON
Make a circle in organization to make it seem like 1 team
RILEY
Add at the end w what we did
MAKE CIRCLES and use same font
We wanted to create a visual that outlines the different disciplines that are going into this project and how they intersect. The three main disciplines included are ecology, climate science, and engineering.
Ecology and climate science intersect when we are ensuring a diverse assemblage of endemic species.
Climate science and engineering intersect when we work to efficiently capture and manipulate water flows
And engineering and ecology intersect when we are maximizing the use of existing infrastructure.
And, of course, all of these intersect with the Tidal Freshwater wetland research facility
MATTIE
MATTIE
This map displays the location of our site. The rice fields that we will use lie next to Nicholson Creek.
Vegetation-reference Alexa and Alyssa’s slides with pictures showing vegetation
MATTIE
Citation- google maps)
-Put more information on the rivers - where the wetlands are
Dont have the etc. or e.g.--say such as photosynthesis...
MATTIE
The largest stream type in this watershed is a type 3 stream, so all of the other waterways in this area flow into it.
MATTIE
MATTIE
MATTIE
This animation shows the increase in global temperature over time. The figure at the bottom right shows that as temperatures increase, ice melts and seawater can expand and increase in volume and cause the sea level to rise.
This figure in the top right shows how groundwater and marine inundation, or flooding, cause sea level rise.
animation
https://phys.org/news/2017-03-sea-honolulu-waikiki-vulnerable-groundwater.html
MATTIE
This experiment is relevant to our project because it shows what the expected results of our own study would be, although the mesocosm used in this study is on a smaller scale.
MATTIE
This figure demonstrates how complex the experiment in a large wetland compares to the mesocosm experiment. The large wetland differs because it factors in wildlife.
Add symbol legend
HUDSON
HUDSON
Add Logos of software
Model hydrological structure, such as a weir
Type of GIS maps
Measure site hydrological features, specifically raised water leve
Hydraulic not hudrologicl
HUDSON
We will need to incorporate electrical components and grid tie-ins
Factor in cost of off-site dirt
ALYSSA
ALYSSA
RACHEL
RACHEL
RILEY
As another part of our pre-development work, we wanted to model the natural water flow prior to any modification, and we decided to use HEC-RAS to accomplish this. For this model, we utilized rain levels associated with a 1-year return period storm to show how the wetland is naturally flooded on a frequent basis. As you can see in this animation, the water easily inundates the rice fields during a one-year storm, filling our site to an average depth of 22 cm after three hours. This depth actually partially covers the berms in water, so We took this to mean that we would need to increase the height of the berms for this project and properly grade them, as Rachel will now discuss.
Input, model, and output (including equations)
RACHEL
RACHEL
ALYSSA
RACHEL
Hudson
RACHEL
MATTIE
RACHEL
RACHEL
Rachel
RACHEL
RACHEL
RACHEL
RACHEL
RACHEL
RACHEL
RACHEL
RACHEL
RACHEL
Extends life of pump
Prevents cavitation and impeller damage
Alexa
HUDSON
HUDSON
HUDSON
hudson
MATTIE
ALEXA
The rack and pinion Hudson discussed…
The pump Rachel discussed...
ALEXA
Need to add sections for cost assessment and hydraulic calculations
ALEXA
Need to add sections for cost assessment and hydraulic calculations
ALEXA
ALEXA
ALYSSA
Riley
To conclude this presentation, we wanted to come back around to that venn diagram we showed earlier. As I mentioned, we knew that this project was going to fall within the intersection of climate science, ecology, and engineering. Naturally, our work throughout this project has been strongly associated with these disciplines. A large portion of our literature review was spent researching climate science and sea level rise predictions, and we used this research to develop a hydrologic regime for the facility.
Our prior knowledge of ecology was useful for ensuring a diverse assemblage of endemic species in the rice fields. As Alyssa discussed, we put a heavy weight on biodiversity when choosing our site, because the purpose of the research facility is to study the effect of climate change on endemic biodiversity.
Lastly, our engineering skills were put to the test with the design of our installations (like the weir, pump, and pipe networks), as well as the drawings and modeling of the pre- and post- development landscape in HecRas and AutoCAD.