GloFAS river discharge data was used as boundary conditions for an ocean model, improving the simulation of ocean salinity states. Compared to previous methods, the dynamically modeled river runoff provided greater temporal and spatial resolution. This project, called BRONCO, aims to benefit coupled atmosphere-land-ocean systems by creating links between Copernicus climate, emergency management, and marine environment monitoring services to integrate river discharge modeling.
DSD-INT 2017 River Basin Simulation Model RIBASIM Developments - Van der KrogtDeltares
Presentation by Wil van der Krogt (Deltares) at the River Basin Planning and Modelling symposium, during Delft Software Days - Edition 2017. Wednesday, 25 October 2017, Delft.
DSD-INT 2016 Effects of Extraction and Open Pit Mining on Rode Beek Saeffele...Deltares
Presentation by Eric Castenmiller (Province of Limburg) at the iMOD International User Day, during Delft Software Days 2016. Tuesday 1 November 2016, Delft.
DSD-INT 2017 Operating the Tennessee River with Delft-FEWS - MillerDeltares
Presentation by Gabriel Miller and Nathan Barber, Tennessee Valley Authority, at the Delft-FEWS - International User Days, during Delft Software Days - Edition 2017. Thursday, 26 October 2017, Delft.
DSD-INT 2017 WFlow - MODFLOW and Reservoirs - Van VerseveldDeltares
Presentation by Willem van Verseveld (Deltares) at the Symposium on catchment hydrology and WFlow, during Delft Software Days - Edition 2017. Tuesday, 24 October 2017, Delft.
DSD-INT 2017 Modelling net-deposition of cohesive sediments within the ETM of...Deltares
Presentation by Roland Hesse, Hamburg University of Technology (TUHH), Germany, at the Delft3D - User Days (Day 2: Sediment transport and morphology), during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
DSD-INT 2017 Linking rainfall recharge models with groundwater models in NGMS...Deltares
Presentation by Rolf Farrell, Environment Agency UK, at the Delft-FEWS - International User Days, during Delft Software Days - Edition 2017. Wednesday, 25 October 2017, Delft.
DSD-INT 2017 River Basin Simulation Model RIBASIM Developments - Van der KrogtDeltares
Presentation by Wil van der Krogt (Deltares) at the River Basin Planning and Modelling symposium, during Delft Software Days - Edition 2017. Wednesday, 25 October 2017, Delft.
DSD-INT 2016 Effects of Extraction and Open Pit Mining on Rode Beek Saeffele...Deltares
Presentation by Eric Castenmiller (Province of Limburg) at the iMOD International User Day, during Delft Software Days 2016. Tuesday 1 November 2016, Delft.
DSD-INT 2017 Operating the Tennessee River with Delft-FEWS - MillerDeltares
Presentation by Gabriel Miller and Nathan Barber, Tennessee Valley Authority, at the Delft-FEWS - International User Days, during Delft Software Days - Edition 2017. Thursday, 26 October 2017, Delft.
DSD-INT 2017 WFlow - MODFLOW and Reservoirs - Van VerseveldDeltares
Presentation by Willem van Verseveld (Deltares) at the Symposium on catchment hydrology and WFlow, during Delft Software Days - Edition 2017. Tuesday, 24 October 2017, Delft.
DSD-INT 2017 Modelling net-deposition of cohesive sediments within the ETM of...Deltares
Presentation by Roland Hesse, Hamburg University of Technology (TUHH), Germany, at the Delft3D - User Days (Day 2: Sediment transport and morphology), during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
DSD-INT 2017 Linking rainfall recharge models with groundwater models in NGMS...Deltares
Presentation by Rolf Farrell, Environment Agency UK, at the Delft-FEWS - International User Days, during Delft Software Days - Edition 2017. Wednesday, 25 October 2017, Delft.
DSD-INT 2017 Using XBeach to train a Bayesian network for coastal hazard pred...Deltares
Presentation by Haris Plomaritis (University of Algarve-CIMA) at the XBeach X (10th Year Anniversary) Conference, during Delft Software Days - Edition 2017. Wednesday, 1 November 2017, Delft.
DSD-INT 2017 Vegetated Flow Simulation using Delft3D for a Large-scale Outdoo...Deltares
Presentation by Un Ji, Korea Institute of Civil Engineering and Building Technology (KICT), Korea, at the Delft3D - User Days (Day 1: Hydrodynamics), during Delft Software Days - Edition 2017. Monday, 30 October 2017, Delft.
DSD-INT 2017 The use of additional sources of data for hydrological modelling...Deltares
Presentation by Laurene Bouaziz (Delft University of technology) at the Symposium on catchment hydrology and WFlow, during Delft Software Days - Edition 2017. Tuesday, 24 October 2017, Delft.
DSD-INT 2019 ShorelineS and future coastline modelling - RoelvinkDeltares
Presentation by Dano Roelvink, IHE Delft Institute for Water Education, The Netherlands, at the Delft3D and XBeach User Day: Coastal morphodynamics, during Delft Software Days - Edition 2019. Wednesday, 13 November 2019, Delft.
DSD-INT 2017 Morphological river modelling in Ecuador, using Delft3D FM - BeckerDeltares
Presentation by Anke Becker, Deltares, Netherlands, at the Delft3D - User Days (Day 2: Sediment transport and morphology), during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
DSD-INT 2020 Lake Turnover Assessments using Delft3D and SOBEK - van MegchelenDeltares
Presentation by Cara van Megchelen & Rob Swan, Cardno, at the Delft3D User Days - Australian Time zone: Inland to Estuary, during Delft Software Days - Edition 2020. Tuesday, 10 November 2020.
DSD-INT 2017 Integrated morphological modelling by coupling XBeach with Delft...Deltares
Presentation by Arjen Luijendijk (Deltares) at the XBeach X (10th Year Anniversary) Conference, during Delft Software Days - Edition 2017. Wednesday, 1 November 2017, Delft.
DSD-INT 2017 The unsaturated zone MetaSWAP-package, recent developments - Van...Deltares
Presentation by Paul van Walsum (Wageningen University & Research) at the iMOD International User Day, during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
DSD-INT 2021 Sea Level Rise Modeling Considerations in Land Use PlanningDeltares
Presentation by Aaron Chung Hin Chow, Research Scientist at New York University of Abu Dhabi, at the Gulf Model Community User Day (Delft3D FM Suite, ...), during Delft Software Days - Edition 2021. Tuesday, 12 October 2021.
DSD-INT 2017 Biogeomorphodynamics of rivers, estuaries and their floodplains ...Deltares
Presentation by Maarten Kleinhans, University of Utrecht, Netherlands, at the Delft3D - User Days (Day 2: Sediment transport and morphology), during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
Evaluation of Standar & Regional Satellite Chlorophyll-a Algorithms for MODIS...Anisa Aulia Sabilah
Review Jurnal Penginderaan Jauh Sinar Tampak "Evaluation of Standar & Regional Satellite Chlorophyll-a Algorithms for MODIS in the Bohai & Yellow Seas, China" oleh Wang et al. (2019)
Two Dimensional Flood Inundation Modelling In Urban Area Using WMS, HEC-RAS a...Amro Elfeki
This research presents a two-dimensional flood inundation modelling in urbanized areas when some features such as roads, buildings, and fences have great effect on flood propagation. Wadi Qows located in Jeddah City, Saudi Arabia was chosen as case study area because of the flood occurrence of 2009 causing lots of losses either economic or loss of life. The WMS and HEC-RAS program were used for a hydraulic simulation based on channel geometry built by incorporating urban features into DEM using GIS effectively. A resampling method of DEM 90 × 90 m become 10 × 10 m grid cell sizes was conducted to produce a higher resolution DEM suitable for urban flood inundation modelling. The results show that a higher resolution leads to increasing the average flood depth and decreasing the flood extent. Although the change of the grid cell sizes does not affect its elevation values, this approach is helpful to perform flood simulations in urban areas when high resolution DEM availability is limited. In addition, the integration of WMS, HEC-RAS and GIS are powerful tools for flood modelling in rural, mountainous and urban areas.
https://www.researchgate.net/publication/330004725_Two_Dimensional_Flood_Inundation_Modelling_in_Urban_Areas_Using_WMS_HEC-RAS_and_GIS_Case_Study_in_Jeddah_City_Saudi_Arabia_IEREK_Interdisciplinary_Series_for_Sustainable_Development
DSD-INT 2023 RESTCOAST ecotope quantification using D-Eco Impact - CaillibotteDeltares
Presentation by Remi Caillibotte (Egis, France), Benjamin Jacob (Hereon, Germany) and Richard Marijnissen (Deltares, Netherlands) at the Delft3D User Days, during the Delft Software Days - Edition 2023 (DSD-INT 2023). Thursday, 16 November 2023, Delft.
DSD-INT 2017 Using XBeach to train a Bayesian network for coastal hazard pred...Deltares
Presentation by Haris Plomaritis (University of Algarve-CIMA) at the XBeach X (10th Year Anniversary) Conference, during Delft Software Days - Edition 2017. Wednesday, 1 November 2017, Delft.
DSD-INT 2017 Vegetated Flow Simulation using Delft3D for a Large-scale Outdoo...Deltares
Presentation by Un Ji, Korea Institute of Civil Engineering and Building Technology (KICT), Korea, at the Delft3D - User Days (Day 1: Hydrodynamics), during Delft Software Days - Edition 2017. Monday, 30 October 2017, Delft.
DSD-INT 2017 The use of additional sources of data for hydrological modelling...Deltares
Presentation by Laurene Bouaziz (Delft University of technology) at the Symposium on catchment hydrology and WFlow, during Delft Software Days - Edition 2017. Tuesday, 24 October 2017, Delft.
DSD-INT 2019 ShorelineS and future coastline modelling - RoelvinkDeltares
Presentation by Dano Roelvink, IHE Delft Institute for Water Education, The Netherlands, at the Delft3D and XBeach User Day: Coastal morphodynamics, during Delft Software Days - Edition 2019. Wednesday, 13 November 2019, Delft.
DSD-INT 2017 Morphological river modelling in Ecuador, using Delft3D FM - BeckerDeltares
Presentation by Anke Becker, Deltares, Netherlands, at the Delft3D - User Days (Day 2: Sediment transport and morphology), during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
DSD-INT 2020 Lake Turnover Assessments using Delft3D and SOBEK - van MegchelenDeltares
Presentation by Cara van Megchelen & Rob Swan, Cardno, at the Delft3D User Days - Australian Time zone: Inland to Estuary, during Delft Software Days - Edition 2020. Tuesday, 10 November 2020.
DSD-INT 2017 Integrated morphological modelling by coupling XBeach with Delft...Deltares
Presentation by Arjen Luijendijk (Deltares) at the XBeach X (10th Year Anniversary) Conference, during Delft Software Days - Edition 2017. Wednesday, 1 November 2017, Delft.
DSD-INT 2017 The unsaturated zone MetaSWAP-package, recent developments - Van...Deltares
Presentation by Paul van Walsum (Wageningen University & Research) at the iMOD International User Day, during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
DSD-INT 2021 Sea Level Rise Modeling Considerations in Land Use PlanningDeltares
Presentation by Aaron Chung Hin Chow, Research Scientist at New York University of Abu Dhabi, at the Gulf Model Community User Day (Delft3D FM Suite, ...), during Delft Software Days - Edition 2021. Tuesday, 12 October 2021.
DSD-INT 2017 Biogeomorphodynamics of rivers, estuaries and their floodplains ...Deltares
Presentation by Maarten Kleinhans, University of Utrecht, Netherlands, at the Delft3D - User Days (Day 2: Sediment transport and morphology), during Delft Software Days - Edition 2017. Tuesday, 31 October 2017, Delft.
Evaluation of Standar & Regional Satellite Chlorophyll-a Algorithms for MODIS...Anisa Aulia Sabilah
Review Jurnal Penginderaan Jauh Sinar Tampak "Evaluation of Standar & Regional Satellite Chlorophyll-a Algorithms for MODIS in the Bohai & Yellow Seas, China" oleh Wang et al. (2019)
Two Dimensional Flood Inundation Modelling In Urban Area Using WMS, HEC-RAS a...Amro Elfeki
This research presents a two-dimensional flood inundation modelling in urbanized areas when some features such as roads, buildings, and fences have great effect on flood propagation. Wadi Qows located in Jeddah City, Saudi Arabia was chosen as case study area because of the flood occurrence of 2009 causing lots of losses either economic or loss of life. The WMS and HEC-RAS program were used for a hydraulic simulation based on channel geometry built by incorporating urban features into DEM using GIS effectively. A resampling method of DEM 90 × 90 m become 10 × 10 m grid cell sizes was conducted to produce a higher resolution DEM suitable for urban flood inundation modelling. The results show that a higher resolution leads to increasing the average flood depth and decreasing the flood extent. Although the change of the grid cell sizes does not affect its elevation values, this approach is helpful to perform flood simulations in urban areas when high resolution DEM availability is limited. In addition, the integration of WMS, HEC-RAS and GIS are powerful tools for flood modelling in rural, mountainous and urban areas.
https://www.researchgate.net/publication/330004725_Two_Dimensional_Flood_Inundation_Modelling_in_Urban_Areas_Using_WMS_HEC-RAS_and_GIS_Case_Study_in_Jeddah_City_Saudi_Arabia_IEREK_Interdisciplinary_Series_for_Sustainable_Development
DSD-INT 2023 RESTCOAST ecotope quantification using D-Eco Impact - CaillibotteDeltares
Presentation by Remi Caillibotte (Egis, France), Benjamin Jacob (Hereon, Germany) and Richard Marijnissen (Deltares, Netherlands) at the Delft3D User Days, during the Delft Software Days - Edition 2023 (DSD-INT 2023). Thursday, 16 November 2023, Delft.
ICLR Friday Forum: Floodplain mapping over Canada: performance at inundation...glennmcgillivray
ICLR conducted a Friday Forum webinar on June 18, 2021 titled 'Floodplain mapping over Canada: Investigating performance at inundation level and understanding dynamics of population flood exposure', led by Dr. Slobodan Simonovic, Director of Engineering Studies, ICLR/Professor Emeritus, Department of Civil and Environmental Engineering, Western University.
Surface runoff estimates from atmospheric re-analysis datasets are increasingly preferred by hydrologists for modelling floods in regions where traditional observations are not sufficiently available. This presentation explores the fidelity of four widely used re-analyses runoff products as hydraulic forcings to a flood inundation model in describing inundation dynamics over Canada. The re-analysis obtained runoff is used with the Catchment-based Macroscale Floodplain (CaMa-Flood) global hydrodynamic model, to derive high-resolution floodplain maps for 100 and 200-yr return periods. The floodplain maps derived from each reanalysis dataset are compared with the regional developed or ‘benchmark floodplain maps’ over six selected flood-prone basins (test basins) in Canada through a set of performance statistics. Using the superior reanalysis runoff dataset, a few historic flood events over the test basins are simulated and subsequently compared with MODIS satellite-derived floodplain information. We notice that more than 75% of the inundation is precisely captured for these events.
The second part of the presentation will focus on the use of four global population datasets (together with census data from Statistics Canada as the reference), their performances and skill in flood exposure assessment across Canada. The flood exposure is quantified based on a set of floodplain maps for Canada derived from the CaMa-Flood global flood model. To obtain further insights at the regional level, the methodology is implemented over six flood-prone River Basins in Canada. We find that about 9% (3.31 million) and 11% (3.90 million) of the Canadian population resides within 1 in 100-yr and 1 in 200-yr floodplains.
This work (i) strongly supports the need for careful selection of a re-analysis dataset while performing inundation modelling for large regions: and (ii) also highlights the need for careful selection of population datasets for preventing further amplification of uncertainties in flood risk. The results derived from this study may be useful for flood risk management and contribute to understanding other disaster impacts on human-environment interrelationships.
DHI and FORCE Technology have together developed a cutting-edge software package for quantifying and optimising channel operability, which sets a new industry standard for how accurately vessel under keel clearance (UKC) predictions can be incorporated effectively into the design and day-to-day operational management of navigational channels in some of the world’s most complex waterways.
DSD-INT 2019 Understanding impact of extreme sea levels under climate change ...Deltares
Presentation by Kun Yan, Deltares, and Sanne Muis, VU University Amsterdam, at the Data Science Symposium, during Delft Software Days - Edition 2019. Thursday, 14 November 2019, Delft.
Day 2 UN-ESCWA Alignment with the 10-Year Strategic Plan of UNCCD: Climate Ch...elodieperrat
Workshop on Alignment & implementation of National Action programmes with the UNCCD 10-year Strategy in the Arab Region
League of Arab States (18- 20 June 2014), Dubai - UAE
UN-ESCWA Mr Tarek Ismael
The Groundwater and Storage interactions project arose out of a meeting on the shoulder of the Greenhouse Gas Technologies Conference in Amsterdam in 2010. It was decided to concentrate initially on the Australian Flagships projects. On 3 May 2011 Australian researchers and government agencies met and presented their work to date.
In these slides Neil Wildgust, from IEGHG, presents the potential impacts of CO2 storage on groundwater resources
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Explore our most comprehensive guide on lookback analysis at SafePaaS, covering access governance and how it can transform modern ERP audits. Browse now!
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
5 Things You Need To Know Before Hiring a Videographer
Bronco cmems ga_se_h2020_slider
1. Keywords: (up to 5)
• GloFAS
• Global hydrology
• Boundary conditions
• Ocean and sea-ice
model
• Reanalysis
B R O N C O
Improvement in simulated ocean salinity
states after switching to use dynamically
modelled river discharge input (with BC)
Changes in salinity RMS errors (PSU, 25-75 m)
2. Benefits of dynamically modelled river discharge input for ocean and coupled
atmosphere-land-ocean systems
B R O N C O
Period of the Project : 2018-2020
4. B R O N C O : T a k e h o m e m e s s a g e
« For the first time, a dynamically modelled river discharge input with
unprecedented level of temporal and spatial resolution becomes available
for the global ocean model up to near-real-time. BRONCO creates links
between different Copernicus services such as C3S, CEMS, and CMEMS. »