This document provides specifications for various vehicle testing equipment, including:
- A roller brake tester that inspects braking performance up to 15,000kg.
- A vehicle sideslip tester that inspects wheel alignment up to 15,000kg.
- A vehicle speedometer that tests speed accuracy up to 120km/h.
- Portable scales for weighing trucks and axles up to 20,000kg.
DV Mobile cranes have three 16 tonne Bubble Cranes, these cranes are extremely compact and versatile.
Features include:
25m Reach
Tight Access
4 Wheel steering
4 Wheel Drive
Heavier lifting capacity and greater distances than our 7T cranes with similar footprint.
Dimensions: 2.4m Wide x 8.5m long x 3.3m High
DV Mobile cranes have three 16 tonne Bubble Cranes, these cranes are extremely compact and versatile.
Features include:
25m Reach
Tight Access
4 Wheel steering
4 Wheel Drive
Heavier lifting capacity and greater distances than our 7T cranes with similar footprint.
Dimensions: 2.4m Wide x 8.5m long x 3.3m High
Applying Stepper Motors: Application Questions You Must Answer & Things to Wa...Design World
This webinar reviews some of the basic parameters necessary to properly select and apply stepper motor technology to motion applications. Topics included in this discussion review basic stepper speed-torque behavior including the stepper over-voltage ratio, a stepper in constant current operation vs. a stepper in voltage drive region, thermal ratings, the impact of winding changes on dynamic behavior, calculations and considerations for intermittent duty operation, motor/system accuracy, failure modes, and the application of all these criteria when applying stepper-based linear actuator products.
Engineers currently using stepper technology in their motion applications that want to understand how to apply stepper motor technology will benefit from this webinar.
In this webinar you will learn:
-Basic parameters necessary to properly select and apply stepper motor technology
-How to understand the stepper motor speed-torque curve and how to apply this to the application
-The main factors to consider when trying to optimize a stepper motor in a variety of applications
Mitsubishi inverter freqrol-a701 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Yaskawa A1000 Drives with its latest vector control technology is capable of delivering higher order performance to meet customer expectations. A1000, not only performs but is aesthetically superior and incredibly powerful. A truly reliable product to address future requirements & current needs, only possible from L&T.
Applying Stepper Motors: Application Questions You Must Answer & Things to Wa...Design World
This webinar reviews some of the basic parameters necessary to properly select and apply stepper motor technology to motion applications. Topics included in this discussion review basic stepper speed-torque behavior including the stepper over-voltage ratio, a stepper in constant current operation vs. a stepper in voltage drive region, thermal ratings, the impact of winding changes on dynamic behavior, calculations and considerations for intermittent duty operation, motor/system accuracy, failure modes, and the application of all these criteria when applying stepper-based linear actuator products.
Engineers currently using stepper technology in their motion applications that want to understand how to apply stepper motor technology will benefit from this webinar.
In this webinar you will learn:
-Basic parameters necessary to properly select and apply stepper motor technology
-How to understand the stepper motor speed-torque curve and how to apply this to the application
-The main factors to consider when trying to optimize a stepper motor in a variety of applications
Mitsubishi inverter freqrol-a701 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Yaskawa A1000 Drives with its latest vector control technology is capable of delivering higher order performance to meet customer expectations. A1000, not only performs but is aesthetically superior and incredibly powerful. A truly reliable product to address future requirements & current needs, only possible from L&T.
Yaskawa A1000 Drives with its latest vector control technology is capable of delivering higher order performance to meet customer expectations. A1000, not only performs but is aesthetically superior and incredibly powerful. A truly reliable product to address future requirements & current needs, only possible from L&T.
We supply Various Performance, Fatigue Test Machine,
Automotive, Bike, Vehicle Parts Test Facilities
Bearing, Gear, Joint, Coupling, Transmission Test Bench
Dynamometer: for Electric Motor, Engine, Generator Brake Test
Hydraulic Testing Equipments: Pump, Valve, Pipe Test
Shaking Table, Seismic Simulator
Automatic Assembly Line
Catalog biến tần Frenic Mega Fuji Electric-Beeteco.comBeeteco
Catalog: Frenic Mega-Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Magneti Marelli diesel and gasoline fuel injector cleaner & tester, specially designed for service injectors. It provides an efficient and cost-effective way to bench test and service every fuel injector.
https://www.facebook.com/MagnetiMarelliAutomotive
IRZ artificial lift solutions [version 1.2 july 2016]Ivan Isaev
IRZ artificial lift solutions:
- Downhole monitoring systems for ESP (downhole sensor, surface acquisition unit);
- Downhole monitoring systems with flow meter;
- Downhole monitoring systems for dual ESP production;
- Electromagnetic anti-scaling downhole system for ESP;
- Downhole monitoring systems for rod-pumps/ PCP/ Gas Lift/ Flowing Wells;
- Сontrol stations (VSD, Soft Starters, Switchboards) for ESP, PCP, rod-pumps.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
2. m
n
3
KZD Series Vehicle Brake Tester
KZD Vehicle Brake Tester is roller counter-force type tester which inspecting the braking
performance of vehicle.
Vehicle parks on the rollers set, which is driven by electric motor; it will run automatically
to drive the wheels. Resistance Force will be obtained before brake applied. When driver
applying the brake, brake force come from vehicle wheels will pass to the Gear Via a Chain
connecting the Gear and roller. Force Sensor will detect the brake force via the Gear Lever
which connecting the sensor and the Gear. The sensor will then transfer the force into electronic signal and send to computer. The
computer will analyze the signal and display the inspection result on the Monitor/ Display Board.
Description of product:
Corundum binding roller set for high adhesion in both dry and wet condition
High precision sensor ensures the exactitude of inspection result
Using of reinforced steel, strengthen and durable structure body
High performance motor and gearbox
Electronic subordinate roller (sensor roller) and speed sensor
Automatic start and anti-peel tyre program
Roller driven sort-out program (Air-lifter system available)
Standard RS-232 interface connection
Model
Max. Axle Load (kg)
KZD-10 PN:5004003
10000
KZD-15 PN:5005002
15000
Measurement Range (N) 0-30000x2 0-45000x2
Wheel Ttread (mm) 850-2600 800-3000
Wheel Diameter (mm) 500-1100 600-1200
Roller Diameter (m
Roller Length (mm)
Motor Power (kW)
Power Supply
) 280
990
11x2
AC 380V, 50Hz,ground
280
1100
15x2
AC 380V, 50Hz,ground
KZZD -Vehicle Axle Load & Brake Tester
The KZZD roller brake tester is a flagshipproduct of Cosber, embodying years of
production experience, the optimal engineering and quality control in testing technology
makes the KZZD brake tester with excellent reliability and efficiency.
Model KZZD-10 PN:6004005 KZZD-15 PN:600 00
Max. Axle Load (kg) 13000 18000
Max. Measured Load (kg 13000 18000
Measurement Range (N) 0-30000x2 0-45000x2
Wheel Ttread (mm) 850-2400 800-3000
Wheel Diameter (mm) 600-1100 600-1200
Roller Diameter (mm) 245 280
Roller Length (mm) 1000 1100
Motor Power (kW) 11x2 15x2
Power Supply AC 380V, 50Hz,ground AC 380V, 50Hz,ground
E-Noise Meter
E-Noise is a hand-held, stand-alone portable instrument for the measurement and analysis of
sound pressure level emitted by stationary vehicles at a nominated engine speed. Input parameters
include engine type (no of strokes) and no of cylinders. These can be pre-programmed for 2 or 4
stroke and 1 to 8 cylinders, Class 1 IEC 61672-1 Ed
Item
Measuring Rage Sou
Range
d pressure
Frequency Range 63Hz to 10kHz
Max Sound Pressure Level 120dB
Level Ranges 60 - 100dB, 70 - 110dB, 80 - 120dB
Frequency Weighting A
3. KCH Series Vehicle Sideslip Tester
KCH Vehicle Sideslip Tester inspects the matching between wheel camber and wheel toe
while the vehicle is driving straightaway. When the vehicle is passing over the Sideslip Plate,
the plate is pushed to the left or the right depending on the wheel tracking. Any deviation
will be sent to computer by the displacement sensor and appeared in sideslip volume and
sideslip direction.
Description of product:
Sideslip plate locker with inner key
No maintenance body design
Sideslip plate & Protection frame integrative structure
Galvanized plate surface for extra long service life
High precision sensor to ensure the exactitude of result
Upper and lower dual bearing system makes smooth movement
Selection of synchronic or independent motion type for different regulation requirement
Over-load & over-value alarm function
Standard RS-232 connection port
Model KCH-10 PN:5104004 KCH-15 PN:5 05002
Max. Axle Weight (kg) 10000 15000
Measuring Range (m/km)
Sideslip Board Dimensions (mm) 1000x1000 1100x1000
Release Board Dimensions (mm) 1000x385 1100x385
Structure Form Double plates with
release board
Double plates with
release board
Power Supply
Or Single Plate Galvanized
AC 220V, 50Hz, ground AC 220V, 50Hz, ground
Emission Gas & Smoke Analyzer
Autocheck GAS 4/5 is a portable automobile exhaust gas analyzer that uses single beam, non dispersive
infrared (NDIR) determine CO, CO2 and HC concentration, O2 and NOx are deteted by electrochemical
sensors. Autocheck GAS 4/5 also calculates LAMBDA and AFR (Air Fuel Ratio) and exceeds the
performance requirements of ASM/BAR 97 and OIML Class 1&0.
And Smoke Opacity Meter with Design Criteria Conforms to French NF R 10-025 Standard, Heavy duty
and high accuracy Smoke Opacity Meter, Measurement in Opacity(%) & Absorption(m-1) Value
Automatic calculation of averages, Automatic Zero Calibration and Self-diagnostic
ITEM GASOLINE SMOKE Accessories
Measurement
CO, CO2, HC, O2, NOx,
Lamda/AFR
Opacity
Probe Gas, Probe
Smoke, Printer,
Printer Paper, Cable
Power
Measuring Range
CO: 0 ~ 15% 0 ~ 100%
CO2: 0 ~ 20%
HC: 0 ~ 30.000ppm Response Time Printer: Less than 10sec
O2: 0 ~ 25 Vol% Warm-Up: Gas Less than 60sec
NOx: 0 ~ 500ppm Warm-Up Smoke Less than 10minute
Lamda: 0.50 ~ 3.00 Weight: Controller 5kg
AFR: 5 ~ 25.00 Weight Smoke sensor 5kg
Dimension 270(W) x 245(H) x 419(D)mm Display LCD
Power Supply 200VAC – 50Hz or 12VDC
Headlight Tester
Headlight Tester is for testing the luminous intensity, light height and optic deviation of the headlight of
automotive and motorcycle. It is equipped with English LCD display, standard RS-232C interface, analog
data output interface and battery-operated in low power consumption mode. Assembly and disassembly
are fast, it is very easy to move.
ITEM NAME RANGE
Central Height of Headlight 50cm ~ 130cm
Light Intensity
Deviation of Optical
Central Height of Headlight
Measuring Distance
Power Supply
Dimension
Weight
0 ~ 60,000cd (standard), 0 ~ 100,000cd (maximum)
Up 1°30" Down 2°30", (up 20cm/10m down
40cm/10m) Left 2°30" Right 2°30", (left 40cm/10m
right 40cm/10m)
±1cm
30 ~ 50cm
AC220V ±10% 50Hz ±1Hz or 1 DC9V battery / 6DC 1.5V batteries
605mm(W) x 1600mm(H) x 590mm(D)
30kg
4. Model KCS-10 PN:5304004 KCS-15 PN:5305004
Max Axle Load (kg) 10000 15000
Measurement range 0-120 0-120
Roller Dimensions (mm) Φ190x1100 Φ190x1200
Roller Axle Separation (mm) 380 405
Air Pressure (MPa) 0.7-0.8 0.7-0.8
odel KJX-10
Plate dimensions 1000mm x 750mm
Maximum displacement of plate 100mm x 100mm
Maximum axle load 13.000kg
Maximum Wheel Load 6.500kg
Movement direction 4 directions (Left Plate: front /
rear & left / right, Right Plate:
front / rear)
Max. displacement force of platen
Control Individually per platform
Power supply to control unit 3PH 380V / 220 V 50 Hz 10A
Working Environment Temperature 0-50C, Humidity
85%
KCS Series Vehicle Speedometer
Features of product:
KCS Speedometer is designed to inspect the speed exactitude of a vehicle. Vehicle is able to
running up to 120km/h on the roller of the tester, simulating the road condition without a
real road test.
Power Supply AC 220V, 50Hz, ground AC 220V, 50Hz, ground
Using of reinforced steel, strengthen and durable structure body
High adhesion coating paint for long working life
High precision sensor and high roundness of roller to ensurethe exactitude of result
Air-lifter and roller brake system make sure the exit of vehicle
0-120km/h measurement range, using wireless remote control
Standard RS-232 connection port
Axle Play Detector allows for testing on abrasion and crack of axle in vehicles such as
cars, vans, buses, and trucks. Especially, the Axle Play Detector enables checking the
status of wheel bearing without lifting.
Features of Products:
Test plates - single control
o Plate movement in counter direction (4 ways)
Check of:
o axle suspension, axle stub, wheel bearing, tie-rod ends, stabiliser, trolley-pivot, twin-axle suspension, trail r
coupling device
Optional:
o Built-in frame for flush-mounted version
o Installation kit
Power Supply:
o 3PH 380V / 220V 50Hz, 10A
Choice of test modes via test lamp
o Easy and convenient operation owing to single-touch mode
o Automatic or manual operation at choice
o Automatic return of test plates into home position (parking position)
o Test lamp
Hydraulic Station Specification
Motor Vertical Y90L-4 0.75kw 380V
Max Pressure 10Mpa
Max. Flow 3.56L/min
Capacity of Oil tank 10L
Hydraulic oil N46 machine oil (old No. 30#
machine oil)
Tint Tester (Tint Window Meter)
AUTOLIGHT™ Plus is a light transmission meter that measures the level of light transmitted
through a tinted window to determine its safety level. The Plus feature allows results to be
downloaded to a PC through an infrared connection. This means that results can be
collected, analysed and printed at the users convenience. Capable of storing the last ten test
results to memory, the AUTOLIGHT™ Plus provides electronic proof of window tint
percentage.
ITEM SPECIFICATION
Display LED readout 0 - 100%, linear from 20 - 100%, ±3%
Power Source 2 x MN 1604 batteries (9 volt)
Lamp Voltage Lamp voltage stabilisted within ±0.1%
Output Voaltage 2856ºK ± 50ºK, conforming to CIE illuminant A
5. Portable Brake Meter
AUTOSTOP Maxi is a portable brake meter, battery-powered, in-vehicle brake performance
tester that measures average and maximum deceleration, stopping distance, test speed and
pedal-force required to stop a vehicle.
The Maxi evaluates brake performance in a quick and reliable manner, and prints an
accurate test report that complies with International Standards.
The Maxi is an efficient diagnostic and compliance tool, designed to test service and
emergency brakes of passenger cars, light and heavy goods vehicles, buses, light and heavy
rail and transit vehicles.
Features:
• Calculates and displays average and maximum
deceleration, distance to stop, test speed and
pedal-force required to stop the vehicle
• Calculates and displays MFDD (Mean Fully
Developed Deceleration) in accordance with
ECE Reg 13
• Prints two original reports (one for the
customer, the other for the examiner) as a
permanent record of the test results, date,
time, examiner’s ID number and the vehicle’s
registration/VIN number
• Price Competitive
• Lightweight (3.0kg), compact
(123x267x246mm) and portable
• Robust construction that is water-resistant
and petrol, chemical and acid proof
• Conventional (QWERTY) keypad lay-out, with
tactile membrane cover
• LCD display
• Adjustable display control
• Both metric and imperial units of
measurement
• Built-in integrity check
• Rechargeable, sealed, acid-gel battery, with
low-battery-level indicator and automatic
shut-down
• Calibration that is intentionally traceable
through NATA
Suspension Tester
• Interval of calibration as determined by
the relevant local authority
Optional Features
• Numerous user-entry hardware and
software options
• Graphical output
• EIA RS-232c Interface
Specifications
Input
• Load Cell: rated to less than ±1N, 0-
1000N
• Accelerometer: rated to less than
±1% over 0-1.5g
Output
• Display: 8-character LCD
• Built-in printer (Dot Matrix)
Standard Accessories
• Battery charger (Australia Only)
• Paper roll
• Printer ribbon
• Paper roll spindle
• Printer cover plate assembly
• Straps or optional floor-mounted
magnet for case restraint
• User Manual
Analysis of Test Results
• Average and maximum
deceleration
• Test speed
• Stopping distance
• Time to stop
• Foot pedal force
Power Source
• 12V, 1.9AH, sealed-lead acid
rechargeable battery
Printer
• Paper: maximum diameter:
48mm; width: 44.5mm (±0.5mm)
• Ribbon: Epson type ERC-05
• Ribbon life: equivalent to 3
paper rolls
• Print speed: 1.0 line/sec
•
Portable Suspension Meter is a compact, battery-powered, hand held shock absorber tester
that uses both the “Rebound Method” and “Damping Ratio.” Monitoring the vertical sprung
mass movement of the vehicle to determine the performance of the individual shock
absorber.
Feature Suspension:
16-button phone keypad allows customer and vehicle details to be added
immediately.
Is installed in seconds on to the panel above the wheel being tested.
Large display screen allows immediate analysis of results including graph.
Capable of storing results of up to 100 vehicles.
Data logging down load capability via serial interface.
Immediate print capability via optional IRDA printer.
Brake Fluid Tester
Brake Fluid Tester is a compact and designed to have a high boiling point to withstand
the high temperatures generated by friction in the vehicle brake system. Unfortunately
brake fluid readily absorbs moisture from air that transfers through the flexible rubber
hoses. Moisture reduces its boiling point leading to possible brake failure.
Overseas studies have highlighted that over 50% of vehicles on the road today may have
fluid that is too old to be within safety standards.
Just like oil, brake fluid wears out and then it is simply not as reliable as fresh new brake
fluid. In addition moisture contaminated brake fluid can corrode internal engine parts.
Operates off 12 volt supply – vehicles own battery
LCD display screen instructions lead operator through the complete test sequence
Increase brake servicing revenue
Suitable for use on new brake fluid and racing fluids
Dimensions: 2250mm (h) x 1000mm (w) x 806mm (d)
6. Portable Truck Scales
Features:
Wireless platforms designed or Cable platforms
designed for creating weighing stations for large
vehicles and axle weighing, avoiding the hassle
of connecting cables between the platforms and
the indicator. Ideal for weighing larger vehicles
(vans, trucks, tankers, trucks etc..); very precise
and sturdy, with attention to details.
Fitted with wheels for transporting the platform.
Sturdy structure, made in special aluminium, which guarantees lightness and makes
these suiable also for harsh working conditions.
Cable with quick connector, platform side.
10 m cable for connecting platform to indicator, complete of connector.
IP68 stainless steel load cells.
Hermetic junction box with IP68 protection degree.
Special vulcanised nonslip rubber applied under the platform, for good grip on all
types of surfaces.
Extremely simple and reliable connection of the scale to the weight indicator.
Specification:
Model WWSC: Dia 500 x 511 x 58mm, Capacity Load 10.000kg, 12.500kg, 15.000kg, Weight Platforms 19.5kg
Model WWSD: Dia 900 x 611 x 58mm, Capacity Load 10.000kg, 15.000, 20.000kg, Weight Platform 41.5kg
Model WWSD-RF: Wireless Platforms with Dia 900 x 611 x 58mm, Capacity Load 10.000kg, 15.000, 20.000kg, Weight
Platform 41.5kg
Model WWSE: Dia 700 x 561 x 58mm, Capacity Load 10.000kg, 12.500kg, 15.000kg, Weight Platforms 26kg
Model WWSE-RF: Wireless Platforms with Dia 700 x 561 x 58mm, Capacity Load 10.000kg, 12.500kg, 15.000kg, Weight
Platforms 26kg
Model WWSF: Dia 900 x 811 x 69mm, Capacity Load 10.000kg, 15.000kg, 20.000kg, 25.000kg, Weight Platforms 26kg
Digital Meter
Laser distance meter measures from 2 inches to 164 feet with accuracy to 0.06 inches.
The meter automatically calculates area and volume. Indirect measurements can be
derived using the Pythagorean theorem function.
Features:
Accuracy to 0.06 inches
Laser Power Off: after 30 seconds
Dimensions: 4.5 x 1.9 x 1.1 " ( 115 x 48 x 28mm)
Weight: 5.3oz ( 150g)
Standard Accessories: Carrying case, 2 AAA batteries.
Measures from 2" to 164' (0.5 to 50m)
Automatically calculates Area and Volume
Accuracy: ±0.06"
Resolution: 0.001"
Boogie Rolle / Free Roller
One set of bogie rollers, mounted in front of and behind the roller brake tester, the
speedometer tester or tacho control unit or the chassis dynamometer, facilitates the
tests of vehicles with rigid all-wheel drive in a considerable way. Each roller set
consists of low-maintenance ballbearing steel rollers jointly blocked via a pneumatic
braking equipment (manual control). Hence, leading on and off is unproblematic.
Technical data:
Axle Weight max: 10tons (KZG-10), Axle Weight max: 15tons (KZG-15)
Frame: Galvanized
Roller length: 190 x 1000mm (KZG-10), Roller length: 190 x 1100mm (KZG-15)
Roller quantity: 3 set
Roller coatink: Powder coatink Black
Test width: adjustable
Braking system: pneumatic by manual hand valve
Max. operating pressure: 0.7 - 0.8mpa
Powersupply: 220VAC, 50Hz
Pneumatic lock of roller, Extra strong structure roller set , Testing speed max: 120km/h
7. VIS Control Unit:
Vehicle Inspection Sistem is :
Cabinet: 1.6m height anti-dust Industrial control
cabinet with larger glass façade, easy install of Industrial Computer,
Printer and Control circuit.
Control mode: Make use of a single Industrial computer or
multiple computers to control the testing equipments, high performance
digital communication technology for a fully automotive operation and multi-
tasks inspection process.
Software: a powerful software system integrated of Login in program, Operation control, System configuration,
Result print, User management, Database management, Calibration program, etc.
Analogue Multi-pointer Display:
High precision stepper motor in Analogue dash board.
Fine Display for the brake force evolution process.
No need of extra-PC to control.
Mini-printer equipped.
LED result display, the most cost saving and effective stand a lone body design.
One key to start, auto operation mode.
No need to configure with PC and printer.
LED real time display of inspection data.
Mini-printer equipped.
Simple calibration mode.