- Ammeraal Beltech produces several ranges of steel chains for demanding applications including the Classic Range and Plus+ Range.
- The Classic Range includes hardened carbon steel chains, ferritic stainless steel chains, and austenitic stainless steel chains.
- These chains are used in applications like food packaging, beverage and bottling, glass container making and filling lines.
We offer a comprehensive range of Strength of Material Lab Equipment, which are widely used in Schools, Colleges and Universities.
Mobile : +91-99710-77233, +91-98118-88915
Email : labtekindia@gmail.com, labequipments.in@gmail.com
Website : www.labtekindia.com
V-Belts are the most common type of drive belt used for power transmission. Their primary function is to transmit power from a primary source, like a motor, to a secondary driven unit. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
We offer a comprehensive range of Strength of Material Lab Equipment, which are widely used in Schools, Colleges and Universities.
Mobile : +91-99710-77233, +91-98118-88915
Email : labtekindia@gmail.com, labequipments.in@gmail.com
Website : www.labtekindia.com
V-Belts are the most common type of drive belt used for power transmission. Their primary function is to transmit power from a primary source, like a motor, to a secondary driven unit. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
Fiberglass Pultrusion Profile and FRP Pultruded Profile are made from glass reinforced isophthalic polyester resin reinforced with E glass fibre and including continuous strand mat and a polyester surface veil as the surface layer.
The manufacturing of pultruded profiles is the most efficient method of forming composite materials with consistent high quality and low scrap. This combination gives excellent corrosion resistance and weatherability at an economic cost.
Pultruded composite profiles are increasing being used in a variety of applications. With the high strength, low weight, non-corrosive features, fiber reinforced polymer (FRP) pultrusions are rapidly growing in demand.
FRP Handrail are industrial/commercial railing systems for stair rails, platform/walkway handrails and guardrails. They are a critical piece of safety equipment that is often taken for granted in our daily lives. They provide extra stability when climbing stairs and prevent falls on a platform or balcony. They had the ability to provide the ultimate in corrosion resistance for aggressive environments such as offshore oil platforms, food processing plants, water treatment plants, mining industry for walkways and other architectural masterpieces.
Fiberglass Pultrusion Profile and FRP Pultruded Profile are made from glass reinforced isophthalic polyester resin reinforced with E glass fibre and including continuous strand mat and a polyester surface veil as the surface layer.
The manufacturing of pultruded profiles is the most efficient method of forming composite materials with consistent high quality and low scrap. This combination gives excellent corrosion resistance and weatherability at an economic cost.
Pultruded composite profiles are increasing being used in a variety of applications. With the high strength, low weight, non-corrosive features, fiber reinforced polymer (FRP) pultrusions are rapidly growing in demand.
FRP Handrail are industrial/commercial railing systems for stair rails, platform/walkway handrails and guardrails. They are a critical piece of safety equipment that is often taken for granted in our daily lives. They provide extra stability when climbing stairs and prevent falls on a platform or balcony. They had the ability to provide the ultimate in corrosion resistance for aggressive environments such as offshore oil platforms, food processing plants, water treatment plants, mining industry for walkways and other architectural masterpieces.
Презентацию подготовили студентки 14 группы 3 курса фармацевтического факультета ВГМУ Храменкова Е.Е., Минич Е.В. http://www.vsmu.by/zdoroviy-obraz.html
L’« Elevator Pitch », la présentation dans l’ascenceur — sous entendu à quelqu’un qui est coincé comme vous dans l’ascenceur mais qui s’en ira dès qu’il est arrivé à son étage, c’est cette présentation succinte — moins de 2 minutes — qui doit expliquer ce que vous faites de manière simple, claire et efficace et surtout susciter l’envie d’en savoir plus.
Trigeminal nerve (nx power lite) /certified fixed orthodontic courses by In...Indian dental academy
The Indian Dental Academy is the Leader in
continuing dental education , training dentists
in all aspects of dentistry and offering a wide
range of dental certified courses in different
formats.
Indian dental academy provides dental crown &
Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit
www.indiandentalacademy.com ,or call
0091-9248678078
“ Je viens de lancer ma startup et je n’ai pas de site internet pour le moment. Je souhaite néanmoins vendre mes produits avec l’aide d’internet car ma cible s’y trouve. Aidez-moi svp !”
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
KITSEN Introduction of Aluminum Ringlock ScaffoldAshleyLiKITSEN
KITSEN Aluminum Ringlock Scaffold is all-round multi-directional aluminum alloy scaffold. This system, which is more flexible than portal frame scaffold, provides access for maintenance, cleaning, and decoration works especially with complictaed structure at certain heights .
And our aluminum ringlock scaffold has passed the SGS test, so you have no need to worry about our quality.
The MS3000 Series is a Class V shutoff heavy, duty, metal seated valve that is designed for pressure up to 990 psi (69 bar) and temperatures up to 1000°F (538°C). It is ideal for condensate, steam or gas service. A wide variety of end connections are available.
2. Industry leading
steel chains solutions
for the food industry
CLASSIC CHAINS RANGE
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K750 190.5 7.50 5.80 3.90 6000 / 1349
S1045
(Heat-treaded
Carbon Steel)
S1045
(Case-hardened
Carbon Steel)
> 0.5 µm 43 HRC
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
W Q G
T
P E
L H
PD
STANDARD
Datasheet: uni 800 Double Hinge
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNINGPITCH38.1MM/1.50IN
uni 800Series
Slat Top Steel Chain
EN
TRAVEL
Slat Top Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 82.5 3.25 9.9 0.39 6.5 0.26 38.1 1.50 80.5 3.17 3.0 0.12 1.6 0.06
Type Double Hinge
STANDARD
Datasheet: uni 810 Single Hinge
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNINGPITCH38.1MM/1.50IN
W
H
P E
L
PD
Q G
TTRAVEL
Slat Top Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.5 1.75 9.9 0.39 6.5 0.26 38.1 1.50 42.5 1.67 3.0 0.12 1.6 0.06
uni 810Series Type Single Hinge
Slat Top Steel Chain
EN
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K225 57.1 2.25 2.18 1.46
4000 / 899
S1045
(Heat-treaded
Carbon Steel)
S1045
(Case-hardened
Carbon Steel)
> 0.5 µm 43 HRC
K250 63.5 2.50 2.25 1.51
K325 82.6 3.25 2.65 1.78
K400 101.6 4.00 3.00 2.02
K450 114.3 4.50 3.30 2.22
K600 152.4 6.00 4.20 2.82
K750 190.5 7.50 5.10 3.43
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
P
EL
R
W
H
K
Q JG
T
uni 881Series Type Tab
Slat Top Steel Chain
EN
TRAVEL
Slat
Side
Pitc
Bac
76.2
Stan
coils
3.04
E G H J K L P
mm in mm in mm in mm in mm in mm in mm in m
6.4 0.25 44.5 1.75 16.3 0.64 56.2 2.21 12.7 0.50 6.5 0.26 38.1 1.50 4
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
mm in mm in kg/m lb/ft
K325 82.6 3.25 457 17.99 2.90 1.95
4000 / 899
S1045
(Heat-treaded
Carbon Steel)
S1045
(Case-hardened
Carbon Steel)
K450 114.3 4.50 500 19.69 3.60 2.42
K750 190.5 7.50 500 19.69 5.30 3.56
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
L
E G* G** H
mm in mm in mm in mm
6.4 0.25 41.3 1.63 46.6 1.83 11.2
*Curve, ** Straight
uni 881Series Type Bevel
Slat Top Stainless St
EN
Width (W) Min. radius (R) Weight Pe
tens
mm in mm in kg/m lb/ft
K325 82.6 3.25 457 17.99 2.90 1.95
4K450 114.3 4.50 500 19.69 3.60 2.42
K750 190.5 7.50 500 19.69 5.30 3.56
* Chains with special hardened pin (HP) for additional wear resistance and
uni 800
Double hinge
Hardend carbon steel
uni 810
Single hinge
Hardend carbon steel
uni 881
Tab
Hardend carbon steel
uni 881
Bevel
Hardend carbon steel
STANDARD
Datasheet: uni 802 Double Hinge
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNINGIN
W Q G
T
P E
L H
PD
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 82.5 3.25 9.9 0.39 6.5 0.26 38.1 1.50 80.5 3.17 3.0 0.12 1.6 0.06
Slat Top Stainless Steel
Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
TRAVEL
uni 802Series
Slat Top Stainless Steel Chain
EN
Type Double Hinge
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K750 190.5 7.50 5.80 3.90 3500 / 787
ASI 430
(Work hardened
ferritic
stainless steel)
AISI 431
(Work hardened
magnetic
stainless steel)
< 0.5 µm 20 HRC
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNINGPITCH38.1MM/1.50IN
W
H
P E
L
PD
Q G
TTRAVEL
STANDARD
Datasheet: uni 812 Single Hinge
uni 812Series Type Single Hinge
Slat Top Stainless Steel Chain
EN
Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.5 1.75 9.9 0.39 6.5 0.26 38.1 1.50 42.5 1.67 3.0 0.12 1.6 0.06
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K225 57.1 2.25 2.18 1.46
2250 / 506
ASI 430
(Work hardened
ferritic
stainless steel)
AISI 431
(Work hardened
magnetic
stainless steel)
< 0.5 µm 20 HRC
K250 63.5 2.50 2.25 1.51
K325 82.6 3.25 2.65 1.28
K400 101.6 4.00 3.00 2.02
K450 114.3 4.50 3.30 2.22
K600 152.4 6.00 4.20 2.82
K750 190.5 7.50 5.10 3.43
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
uni 881Series Type Tab
Slat Top Stainless Steel Chain
EN
Slat Top St
Side flexing
Pitch: 38.1
Backflex rad
76.2 mm (3
Standard sh
coils of 80
3.048 m (1
E G H J K L P Q
mm in mm in mm in mm in mm in mm in mm in mm
6.4 0.25 44.5 1.75 16.3 0.64 56.2 2.21 12.7 0.50 6.5 0.26 38.1 1.50 43.0
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
mm in mm in kg/m lb/ft Roug
K325 82.6 3.25
200 7.90
2.90 1.95
2250 / 506
AISI 430
(Work hardened
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
< 0.
457 18.00
K450 114.3 4.50 500 19.69 3.60 2.42
K750 190.5 7.50 500 19.69 5.30 3.56
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
P
EL
R
W
H
K
Q JG
T
TRAVEL
L
T
E G* G** H
mm in mm in mm in mm
6.4 0.25 41.3 1.63 46.6 1.83 11.2
*Curve, ** Straight
uni 881Series Type Bevel
Slat Top Stainless St
EN
Width (W) Min. radius (R) Weight Pe
tensi
mm in mm in kg/m lb/ft
K325 82.6 3.25 457 17.99 2.90 1.95
22K450 114.3 4.50 500 19.69 3.60 2.42
K750 190.5 7.50 500 19.69 5.30 3.56
* Chains with special hardened pin (HP) for additional wear resistance and h
uni 802
Double hinge
Ferritic stainless steel
uni 812
Single hinge
Ferritic stainless steel
uni 881
Tab
Ferritic stainless steel
uni 881
Bevel
Ferritic stainless steel
STANDARD
Datasheet: uni 805 Plus+ Double Hinge
G
W Q G
T
P E
L H
PD
EN
TRAVEL
Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
uni 805Series
Slat Top Stainless Steel Chain
Type Double Hinge
STANDARD
Datasheet: uni 815 Plus+ Single Hinge
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNING
uni 815Series
Slat Top Stainless Steel Chain
EN
Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.5 1.75 9.9 0.39 6.5 0.26 38.1 1.50 42.5 1.67 3.0 0.12 1.6 0.06
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K325 82.6 3.25 2.65 1.78
S420 35
(Special Work AISI 431
K330 83.8 3.30 2.70 1.81
Type Single Hinge
W
H
P E
L
PD
Q G
TTRAVEL
P
EL
R
W
H
K
Q JG
T
TRAVEL
uni 881Series Type Tab
EN
Slat Top S
Side flexin
Pitch: 38.1
Backflex r
76.2 mm
Standard
coils of 80
3.048 m (
E G H J K L P Q
mm in mm in mm in mm in mm in mm in mm in mm
6.4 0.25 44.5 1.75 16.3 0.64 56.2 2.21 12.7 0.50 6.5 0.26 38.1 1.50 43.0
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
mm in mm in kg/m lb/ft Rou
Slat Top Stainless Steel Chain
L
T
E G* G** H
mm in mm in mm in mm
6.4 0.25 41.3 1.63 46.6 1.83 11.2
*Curve, ** Straight
uni 881Series Type Bevel
Slat Top Stainless Ste
EN
Width (W) Min. radius (R) Weight Per
tensil
uni 805
Double hinge
Austenitic stainless steel
uni 815
Single hinge
Austenitic stainless steel
uni 881
Tab
Austenitic stainless steel
uni 881
Bevel
Austenitic stainless steel
• Hardened carbon steel chains
• Ferritic stainless steel chains
• Austenitic stainless steel chains
Classic Range
• Food packaging jars: jams, sauces, baby food ect.
• Beverage and bottling
• Glass container making plants
• Glass container filling lines
Applications
3. PLUS+ CHAINS RANGE STANDARD
Datasheet: uni 815 Plus+ Single Hinge
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNINGPITCH38.1MM/1.50IN
uni 815Series
Slat Top Stainless Steel Chain
EN
Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.5 1.75 9.9 0.39 6.5 0.26 38.1 1.50 42.5 1.67 3.0 0.12 1.6 0.06
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K325 82.6 3.25 2.65 1.78
3000 / 674
S420 35
(Special Work
hardened
Crome-nickel
ferriticc
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
< 0.3 µm 30 HRC
K330 83.8 3.30 2.70 1.81
K400 101.6 4.00 3.00 2.02
K450 114.3 4.50 3.30 2.22
K600 152.4 6.00 4.20 2.82
K750 190.5 7.50 5.10 3.43
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
Type Single Hinge
W
H
P E
L
PD
Q G
TTRAVEL
STANDARD
Datasheet: uni 8811 Plus+ Magnetic
STANDARDSTANDARDSTANDARDSIDEFLEXINGPITCH38.1MM/1.50IN
TRAVEL
Q GW
R
P
H
E
T L
uni 8811Series Type Magnetic
Slat Top Stainless Steel Chain
EN
Slat Top Stainless Steel Chain
Side flexing chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
76.2 mm (3.00 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
E G H L P Q T
mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.0 1.73 9.9 0.39 6.5 0.26 38.1 1.50 42.2 1.66 3.0 0.12
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in mm in kg/m lb/ft Roughness Hardness
K325 82.6 3.25
500 19.69
2.50 1.68
3000 / 674
S420 35
(Special Work
hardened
Crome-nickel
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
< 0.3 µm 30 HRC
K330 83.8 3.30 2.65 1.78
P
EL
R
W
H
K
Q JG
T
uni 8811Series Type Tab
Slat Top Stainless Steel Chain
EN
TRAVEL
Slat Top
Side flex
Pitch: 38
Backflex
76.2 mm
Standard
coils of
3.048 m
E G H J K L P
mm in mm in mm in mm in mm in mm in mm in mm
6.4 0.25 44.5 1.75 16.3 0.64 56.2 2.21 12.7 0.50 6.5 0.26 38.1 1.50 43.0
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
mm in mm in kg/m lb/ft Ro
K325 82.6 3.25 500 19.69 3.10 2.08 3000 / 674
S420 35
(Special Work
hardened
Crome-nickel
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
<
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
L
EN
E G H
mm in mm in mm in
6.4 0.25 82.5 3.25 9.9 0.39
Width (W) Weight Pe
tens
mm in kg/m lb/ft
K750 190.5 7.50 5.80 3.90 45
* Chains with special hardened pin (HP) for additional wear resista
uni 805Series
Slat Top Stainless
Type D
815 Plus+
Single Hinge
Special hard stainless steel
8811 Plus+
Magnetic
Special hard stainless steel
8811 Plus+
Tab
Special hard stainless steel
805 Plus+
Double Hinge
Special hard stainless steel
NONSTANDARD
Datasheet: uni 815 Plus+ Single Hinge Optical
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNINGPITCH38.1MM/1.50IN
uni 815Series
Slat Top Stainless Steel Chain
EN
Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.5 1.75 9.9 0.39 6.5 0.26 38.1 1.50 42.5 1.67 3.0 0.12 1.6 0.06
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K325 82.6 3.25 2.65 1.78
3000 / 674
S420 35
(Special Work
hardened
Crome-nickel
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
< 0.18 µm 30 HRC
K330 83.8 3.30 2.70 1.81
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
Type Single Hinge Optical
W
H
P E
L
PD
Q G
TTRAVEL
NONSTANDARD
Datasheet: uni 8811 Plus+ Magnetic Optical
STANDARDSTANDARDSTANDARDSIDEFLEXINGPITCH38.1MM/1.50INTRAVEL
Q GW
R
P
H
E
T L
uni 8811Series Type Magnetic Optical
Slat Top Stainless Steel Chain
EN
Slat Top Stainless Steel Chain
Side flexing chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
76.2 mm (3.00 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
E G H L P Q T
mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.0 1.73 9.9 0.39 6.5 0.26 38.1 1.50 42.2 1.66 3.0 0.12
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in mm in kg/m lb/ft Roughness Hardness
K325 82.6 3.25 500 19.69 2.50 1.68
3000 / 674
S420 35
(Special Work
hardened
Crome-nickel
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
< 0.2 µm 30 HRC
K330 83.8 3.30 500 19.69 2.65 1.78
P
EL
R
W
H
K
Q JG
TTRAVEL
uni 8811Series Type Tab
Slat Top Stainless Steel Chain
EN
Slat Top
Side flexi
Pitch: 38.
Backflex
76.2 mm
Standard
coils of 8
3.048 m
E G H J K L P Q
mm in mm in mm in mm in mm in mm in mm in mm
6.4 0.25 44.5 1.75 16.3 0.64 56.2 2.21 12.7 0.50 6.5 0.26 38.1 1.50 43.0
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
mm in mm in kg/m lb/ft Rou
K330 83.8 3.30 500 19.69 3.15 2.08
3000 / 5674
S420 35
(Special Work
hardened
Crome-nickel
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
<
K350 88.9 3.50 500 19.69 3.30 2.22
K450 114.3 4.50 610 24.02 3.80 2.55
K750 190.5 7.50 610 24.02 5.50 3.70
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
uni 8127Series
Slat Top Stainless
EN
E G H
mm in mm in mm in m
6.4 0.25 60.0 2.36 9.7 0.38
Width (W) Weight Pe
tensi
mm in kg/m lb/ft
K750 190.5 7.50 5.1 3.43 30
* Chains with special hardened pin (HP) for additional wear resistan
Type S
815 Plus+
Single Hinge Optical
Special hard stainless steel
8811 Plus+
Magnetic Optical
Special hard stainless steel
8811 Plus+
Tab R
Special hard stainless steel
8127 Plus+
Single Hinge Wide
Special hard stainless steel
NONSTANDARD
Datasheet: uni 512 Plus+ Single Hinge
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNINGH38.1MM/1.50IN
W
H
Q G
T
P E
L
PD
uni 512Series
Slat Top Stainless Steel Chain
EN
TRAVEL Slat Top Stainless Steel Chain
Straight running chain
Pitch: 25.4 mm (1.00 in)
Backflex radius:
100.0 mm (3.94 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.5 1.75 9.7 0.38 6.5 0.26 25.4 1.00 42.3 1.67 3.1 0.12 1.6 0.06
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K197 50.0 1.97 2.20 1.48
3000 / 674
S420 35
(Special Work
hardened
Crome-nickel
ferriticc
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
< 0.3 µm 30 HRC
K217 55.0 2.17 2.29 1.54
K236 60.0 2.36 2.41 1.62
K250 63.5 2.50 2.49 1.67
K283 72.0 2.83 2.65 1.78
K325 82.6 3.25 2.86 1.92
K350 88.9 3.50 3.01 2.02
K400 101.6 4.00 3.26 2.19
Type Single Hinge
W
H
Q G
T
P E
L
PD
NONSTANDARD
Datasheet: uni 815 Plus+ Single Hinge Narrow
STANDARDSTANDARDSTANDARDSTRAIGHTRUNNING1.50IN
uni 815Series
Slat Top Stainless Steel Chain
EN
TRAVEL Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
150.0 mm (5.91 in)
Standard shipping lengths:
coils of 80 in,
3.048 m (10 ft)
E G H L P Q T PD
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 23.8 0.94 9.9 0.39 6.5 0.26 38.1 1.50 21.8 0.86 3.0 0.12 2.8 0.11
Width (W) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
Surface
mm in kg/m lb/ft Roughness Hardness
K125 31.8 1.25 1.10 0.74
1500 / 337
S420 35
(Special Work
hardened
Crome-nickel
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
< 0.3 µm 30 HRC
K175 44.5 1.75 1.30 0.87
Type Single Hinge Narrow
W
H
QG
T
P
EL
R
uni 8811Series Type Bevel
Slat Top Stainless Steel Chain
EN
TRAVEL
Slat Top
Side flexi
Pitch: 38
Backflex
76.2 mm
Standard
coils of 8
3.048 m
E G H J K L P Q
mm in mm in mm in mm in mm in mm in mm in mm
6.4 0.25 44.5 1.75 16.3 0.64 56.2 2.21 12.7 0.50 6.5 0.26 38.1 1.50 43.0
E G H J K L P Q
mm in mm in mm in mm in mm in mm in mm in mm
6.4 0.25 44.5 1.75 16.3 0.64 56.2 2.21 12.7 0.50 6.5 0.26 38.1 1.50 43.0
Width (W) Min. radius (R) Weight Permissible
tensile strength
N/lbf
Chain
material
Pin
material*
mm in mm in kg/m lb/ft Rou
K325 82.6 3.25 500 19.69 3.10 2.08
3000 / 674
S420 35
(Special Work
hardened
Crome-nickel
ferritic
Stainless Steel)
AISI 431
(Work hardened
magnetic
Stainless Steel)
<K450 114.3 4.50 610 24.02 3.80 2.55
K750 190.5 7.50 610 24.02 5.50 3.70
uni 8817Series Typ
Slat Top Stainless
EN
E G H
mm in mm in mm
6.4 0.25 60.0 2.36 9.9
Width (W) Min. radius (R) Weight
mm in mm in kg/m lb/
512 Plus+
Single Hinge
Special hard stainless steel
815 Plus+
Single Hinge Narrow
Special hard stainless steel
8811 Plus+
Bevel
Special hard stainless steel
8817 Plus+
Magnetic Wide
Special hard stainless steel
• Harder stainless steel
• New surface finish
• Lower surface roughness
Plus+ Range
• Lower sliding resistance
• For high speed production lines
• More stable container handling
Benefits
Work with the best!
Industry leading chain solutions
Download our datasheets
with full technical details at
www.unichains.com
4. Date:01.2016
... and 150 more service contact points on www.ammeraalbeltech.com
Austria
T +43 171728 133
sales@ammeraalbeltech.de
www.ammeraalbeltech.at
Belgium
T +32 2 466 0300
salesgb@ammeraalbeltech.be
www.ammeraalbeltech.be
Canada
T +1 905 890 1311
info@ammeraalbeltech.ca
www.ammeraalbeltech.com
Chile
T +56 233 12900
ventas@ammeraalbeltech.cl
www.ammeraalbeltech.cl
China
T +86 21 5280 6810
info@ammeraalbeltech.com.cn
www.ammeraalbeltech.com.cn
Czech Republic
T +420 567 117 211
prodej@ammeraalbeltech.cz
www.ammeraalbeltech.cz
Denmark
T + 45 75 72 31 00
admin@unichains.com
www.unichains.com
Finland
T +358 207 911 400
info@ammeraalbeltech.fi
www.ammeraalbeltech.fi
France
T +33 3 20 90 36 00
clientabfrance@ammeraalbeltech.com
www.ammeraalbeltech.fr
Germany
T +49 4152 937-0
sales@ammeraalbeltech.de
www.ammeraalbeltech.de
Hungary
T +36 30 311 6099
info@ammeraalbeltech.hu
www.ammeraalbeltech.hu
India
T +91 44 265 34 244
info@ammeraalbeltech.net.in
www.ammeraalbeltech.com
Italy
T +39 051 660 60 06
info@ammeraalbeltech.it
www.ammeraalbeltech.it
Luxembourg
T +352 26 48 38 56
sales@ammeraal-beltech.lu
www.ammeraal-beltech.lu
Malaysia
T +60 3 806 188 49
sales.kl@ammeraalbeltech.my
www.ammeraalbeltech.com
Netherlands
T +31 72 57 51212
infonl@ammeraalbeltech.com
www.ammeraalbeltech.nl
Poland
T +48 32 44 77 179
biuro@ammeraalbeltech.com
www.ammeraalbeltech.com
Portugal
T +351 22 947 94 40
geral@ammeraalbeltech.pt
www.ammeraalbeltech.pt
Singapore
T +65 62739767
sales@ammeraalbeltech.sg
www.ammeraalbeltech.com
Slovakia
T +421 2 55648541-2
predaj@ammeraalbeltech.sk
www.ammeraalbeltech.sk
South Korea
T +82 31 448 3613-7
amel@ammeraalbeltech.co.kr
www.ammeraalbeltech.co.kr
Spain
T +34 93 718 3054
ventas@ammeraalbeltech.es
www.ammeraalbeltech.es
Sweden
T +46 44 780 3010
se-info@ammeraalbeltech.com
www.ammeraalbeltech.se
Switzerland
T +41 55 2253 535
info@ammeraalbeltech.ch
www.ammeraalbeltech.ch
Thailand
T +66 2 902 2604-13
sales@ammeraalbeltech.th.com
www.ammeraalbeltech.com
United Kingdom
T +44 1992 500550
sales@ammeraalbeltech.co.uk
www.ammeraalbeltech.co.uk
United States
T +1 847 673 6720
info@ammeraalbeltechusa.com
www.ammeraalbeltech.com
Vietnam
T +84 8 376 562 05
info@ammeraalbeltech.com.vn
www.ammeraalbeltech.com.vn
Global Headquarters:
Ammeraal Beltech Holding B.V.
P.O. Box 38
1700 AA Heerhugowaard
The Netherlands
T +31 72 575 1212
F +31 72 571 6455
info@ammeraalbeltech.com
www.ammeraalbeltech.com
Local Contacts
TransmissionBelts
Expert advice, quality solutions
and local service
for all your belting needs
Fabrication&service
SeamlessBelts
TimingBelts
ConveyorBeltsModularBelts
Get in touch with your nearest Ammeraal
Beltech sales office (see list overleaf), or visit
www.ammeraalbeltech.com to locate your
local service centre, and we’ll be glad to help.
Want to know more?
Contact us
Local Contacts