Presentatie van Bekaert op 22 oktober 2015 tijdens de Dutch Design Week, bij TUE op activiteit ism Cement&BetonCentrum: Grote ambities met 3D Betonprinten.
What can «blue» do for you: overcoming ICES challenges with BlueBRIDGE toolsBlue BRIDGE
Scott Large, ICES, at BlueBRIDGE workshop on "Data Management services to support stock assessement", held during the Annual ICES Science conference 2016
The patent protects a star-shaped element with at least three flaps which, when suitably interconnected with other adjacent ones and in several layers, constitutes an innovative layar jamming fabric.
ICIC is the International Conference on Trends for Scientific Information Professionals.
25th ICIC International Conference for the Information Community
For those in the sci-tech world, sharing best practices, networking and evaluating trends have become matters of considerable importance, and the annual ICIC Meeting & Exhibition is the significant forum for this, attracting over 200 attendees from the main sci-tech companies and information, service or software providers.
Started in 1989 ...
These exciting and highly respected annual conferences, that started in Montreux in 1989 and were subsequently held in Annecy, Nîmes, Barcelona, Nice, Vienna and Berlin have always provided a barometer as to the strengths and frailties of the world of sci-tech and patent information.
The conference lasts for two and a half days and features approximately 24 formal presentations, panels on topical matters, all interspersed with short new product information presentations. All sessions are plenary. The conference normally begins with a reception and Welcome Dinner on the first evening to enable attendees to begin to network with each other. Lunches are taken at the conference venue, and breaks are designed to facilitate networking and interaction. A focused exhibition of approximately 25 stands is integrated within the conference. Attendance at these meetings is highly international, with no one nationality predominating.
The 2013 ICIC conference is organised by Dr Haxel Congress and Event Management.
The BlueBRIDGE approach to collaborative researchBlue BRIDGE
Gianpaolo Coro, ISTI-CNR, at BlueBRIDGE workshop on "Data Management services to support stock assessement", held during the Annual ICES Science conference 2016
Annual Meeting of Coatings Industry at ChinacoatCoatresa
Shanghai hosted last November 15th-17th 2017 a new edition of the China International Exhibition for Coatings, Printing Inks and Adhesives, also known as Chinacoat. That was the scenario for the main novelties related to the non-stick industry.
What can «blue» do for you: overcoming ICES challenges with BlueBRIDGE toolsBlue BRIDGE
Scott Large, ICES, at BlueBRIDGE workshop on "Data Management services to support stock assessement", held during the Annual ICES Science conference 2016
The patent protects a star-shaped element with at least three flaps which, when suitably interconnected with other adjacent ones and in several layers, constitutes an innovative layar jamming fabric.
ICIC is the International Conference on Trends for Scientific Information Professionals.
25th ICIC International Conference for the Information Community
For those in the sci-tech world, sharing best practices, networking and evaluating trends have become matters of considerable importance, and the annual ICIC Meeting & Exhibition is the significant forum for this, attracting over 200 attendees from the main sci-tech companies and information, service or software providers.
Started in 1989 ...
These exciting and highly respected annual conferences, that started in Montreux in 1989 and were subsequently held in Annecy, Nîmes, Barcelona, Nice, Vienna and Berlin have always provided a barometer as to the strengths and frailties of the world of sci-tech and patent information.
The conference lasts for two and a half days and features approximately 24 formal presentations, panels on topical matters, all interspersed with short new product information presentations. All sessions are plenary. The conference normally begins with a reception and Welcome Dinner on the first evening to enable attendees to begin to network with each other. Lunches are taken at the conference venue, and breaks are designed to facilitate networking and interaction. A focused exhibition of approximately 25 stands is integrated within the conference. Attendance at these meetings is highly international, with no one nationality predominating.
The 2013 ICIC conference is organised by Dr Haxel Congress and Event Management.
The BlueBRIDGE approach to collaborative researchBlue BRIDGE
Gianpaolo Coro, ISTI-CNR, at BlueBRIDGE workshop on "Data Management services to support stock assessement", held during the Annual ICES Science conference 2016
Annual Meeting of Coatings Industry at ChinacoatCoatresa
Shanghai hosted last November 15th-17th 2017 a new edition of the China International Exhibition for Coatings, Printing Inks and Adhesives, also known as Chinacoat. That was the scenario for the main novelties related to the non-stick industry.
Digital Catapult Centre Brighton - Bill Harpleywired_sussex
At The Digital Catapult Centre Brighton event, Tech Beyond The Screen: Connectivity & Infrastructure on Wednesday 2nd March, Bill Harpley talked about Brighton's Everynet project.
Simulation based Engineering methods maturity level has significantly increased. Now Simulation is considered as third pillar of Science and Technology development. With simulations you can stretch the limits without the physical constraints.
Now, we take care various design requirements concurrently as against rain flow or sequential product development. This significantly reduces the product development cost and time.
Multiphysics CAE plays a significant role for reliable, efficient and affordable product development.
Science Demonstrator Session: Physics and AstrophysicsEOSCpilot .eu
The main focus of Science Demonstrator sessions is to provide feedback to the EOSC community on the first experience of science demonstrators in the practical use of the emerging EOSC ecosystem.
Each panel will consist of a representative of a Science Demonstrator that will provide an overview of their experiences in the use of emerging EOSC services.
These sessions will help members of the scientific communities understanding the current state of maturity of the EOSC ecosystem and what is obtainable in a field of scientific research. It is also valuable to prospective Service Providers who wish to discover what are the challenges and opportunities that user communities might have to deal with, as a result of the adoption of their services.
This session will focus on Physics and Astrophysics.
A UHPC (ultra high performance concrete) presentation projects.Nolan Mayrhofer
UHPC presentation featuring select international Ductal projects. This is an in depth look at the types of architectural projects UHPC is best suited for.
Archiver pilot phase kick off Award CeremonyArchiver
In the framework of the ARCHIVER pre-commercial procurement tender, between December 2020 and August 2021 three consortia worked on innovative, prototype solutions for Long-term data preservation, in close collaboration with CERN, EMBL-EBI, DESY and PIC. The selection process for proceeding to the next phase is over and the consortium/a selected to continue with the pilot phase were officially announced at a public ceremony on the 29th of November 2021
Archiver pilot phase kick off Award CeremonyArchiver
In the framework of the ARCHIVER pre-commercial procurement tender, between December 2020 and August 2021 three consortia worked on innovative, prototype solutions for Long-term data preservation, in close collaboration with CERN, EMBL-EBI, DESY and PIC. The selection process for proceeding to the next phase is over and the consortium/a selected to continue with the pilot phase were officially announced at a public ceremony on the 29th of November 2021
HPC in the cloud comes of age - Red Oak HPC SeminarMartin Hamilton
What does HPC in the cloud look like in 2017, and how did we get there? In this talk for Red Oak's HPC Seminar, I look at the origins of cloud HPC, and how it has become mainstream through technologies like Amazon Web Services and OpenStack. I also offer a sneak preview of the 2017 UK national e-Infrastructure survey results, and some thoughts about what's next in cloud HPC, from hyperscale providers to the momentum behind container technologies from Docker and the Open Container Initiative.
HNSciCloud has shared with the IT experts in scientific computing belonging to the HEPiX forum, the status of the ongoing Pre-Commercial Procurement of innovative cloud services and what the expected results might be.
Archiving data from Durham to RAL using the File Transfer Service (FTS)Jisc
From Jisc's campus network engineering for data-intensive science workshop on 19 October 2016.
https://www.jisc.ac.uk/events/campus-network-engineering-for-data-intensive-science-workshop-19-oct-2016
Booosting (platform voor koplopers in bouwinnovatie) organiseerde een aantal workshops om deze uitdaging aan te gaan. Eén van de innovatieve uitkomsten van de workshops is: geen afval en meer CO2-reductie door verbetering isolatieglas. We halen bestaand isolatieglas uit elkaar en reinigen het. Daarna voegen we een specifieke folie toe en bouwen we het geheel op tot triple glas! Het is de bedoeling dat het gehele upgrade-proces mobiel kan plaatsvinden. Daarom willen we twee vrachtwagens ombouwen tot een werkplaats om het triple glas overal ter plekke te kunnen maken. Een enthousiast team heeft inmiddels een eerste succesvolle praktijkproef uitgevoerd en Booosting bestuurslid Rutger Snoek is hierover ook geïnterviewd. Kijk voor meer info ook op www.booosting.nl.
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Houtconstructies van Rob Doomen - Pieters Bouwtechniek Delft.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
More Related Content
Similar to Booosting - 2015okt22 - 3D Concrete Printing - Bekaert
Digital Catapult Centre Brighton - Bill Harpleywired_sussex
At The Digital Catapult Centre Brighton event, Tech Beyond The Screen: Connectivity & Infrastructure on Wednesday 2nd March, Bill Harpley talked about Brighton's Everynet project.
Simulation based Engineering methods maturity level has significantly increased. Now Simulation is considered as third pillar of Science and Technology development. With simulations you can stretch the limits without the physical constraints.
Now, we take care various design requirements concurrently as against rain flow or sequential product development. This significantly reduces the product development cost and time.
Multiphysics CAE plays a significant role for reliable, efficient and affordable product development.
Science Demonstrator Session: Physics and AstrophysicsEOSCpilot .eu
The main focus of Science Demonstrator sessions is to provide feedback to the EOSC community on the first experience of science demonstrators in the practical use of the emerging EOSC ecosystem.
Each panel will consist of a representative of a Science Demonstrator that will provide an overview of their experiences in the use of emerging EOSC services.
These sessions will help members of the scientific communities understanding the current state of maturity of the EOSC ecosystem and what is obtainable in a field of scientific research. It is also valuable to prospective Service Providers who wish to discover what are the challenges and opportunities that user communities might have to deal with, as a result of the adoption of their services.
This session will focus on Physics and Astrophysics.
A UHPC (ultra high performance concrete) presentation projects.Nolan Mayrhofer
UHPC presentation featuring select international Ductal projects. This is an in depth look at the types of architectural projects UHPC is best suited for.
Archiver pilot phase kick off Award CeremonyArchiver
In the framework of the ARCHIVER pre-commercial procurement tender, between December 2020 and August 2021 three consortia worked on innovative, prototype solutions for Long-term data preservation, in close collaboration with CERN, EMBL-EBI, DESY and PIC. The selection process for proceeding to the next phase is over and the consortium/a selected to continue with the pilot phase were officially announced at a public ceremony on the 29th of November 2021
Archiver pilot phase kick off Award CeremonyArchiver
In the framework of the ARCHIVER pre-commercial procurement tender, between December 2020 and August 2021 three consortia worked on innovative, prototype solutions for Long-term data preservation, in close collaboration with CERN, EMBL-EBI, DESY and PIC. The selection process for proceeding to the next phase is over and the consortium/a selected to continue with the pilot phase were officially announced at a public ceremony on the 29th of November 2021
HPC in the cloud comes of age - Red Oak HPC SeminarMartin Hamilton
What does HPC in the cloud look like in 2017, and how did we get there? In this talk for Red Oak's HPC Seminar, I look at the origins of cloud HPC, and how it has become mainstream through technologies like Amazon Web Services and OpenStack. I also offer a sneak preview of the 2017 UK national e-Infrastructure survey results, and some thoughts about what's next in cloud HPC, from hyperscale providers to the momentum behind container technologies from Docker and the Open Container Initiative.
HNSciCloud has shared with the IT experts in scientific computing belonging to the HEPiX forum, the status of the ongoing Pre-Commercial Procurement of innovative cloud services and what the expected results might be.
Archiving data from Durham to RAL using the File Transfer Service (FTS)Jisc
From Jisc's campus network engineering for data-intensive science workshop on 19 October 2016.
https://www.jisc.ac.uk/events/campus-network-engineering-for-data-intensive-science-workshop-19-oct-2016
Booosting (platform voor koplopers in bouwinnovatie) organiseerde een aantal workshops om deze uitdaging aan te gaan. Eén van de innovatieve uitkomsten van de workshops is: geen afval en meer CO2-reductie door verbetering isolatieglas. We halen bestaand isolatieglas uit elkaar en reinigen het. Daarna voegen we een specifieke folie toe en bouwen we het geheel op tot triple glas! Het is de bedoeling dat het gehele upgrade-proces mobiel kan plaatsvinden. Daarom willen we twee vrachtwagens ombouwen tot een werkplaats om het triple glas overal ter plekke te kunnen maken. Een enthousiast team heeft inmiddels een eerste succesvolle praktijkproef uitgevoerd en Booosting bestuurslid Rutger Snoek is hierover ook geïnterviewd. Kijk voor meer info ook op www.booosting.nl.
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Houtconstructies van Rob Doomen - Pieters Bouwtechniek Delft.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Bouwdeel D(emontabel) Bouwdeel D(emontabel) ontwerp en bouwproces van Jan Houtekamer - directeur cepezedbouwteam.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart 2020 in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Nieuwe houten bouwproducten van
Bas Meeuwissen - technisch adviseur Metsä Wood.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Circulair bouwen en Bouwdeel D(emontabel) van Menno Rubbens - directeur cepezedprojects.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart 2020 in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Trends in circulair bouwen met hout van Mathew Vola - directeur Arup
Aankondiging van deze activiteit
https://booosting.nl/event/show/id/326
11 februari 2020 organiseerden Booosting en Si-X een projectbezoek naar het Co-Creation Centre. Het onderwerp van deze activiteit was De Booosting activiteit was structureel verlijmen en het gebruik van siliconen in de bouw.
Daags ervoor verscheen dit artikel in Cobouw: Volledig glazen paviljoen kan aanval met bulldozer weerstaan.
aankondiging van deze activiteit
https://booosting.nl/event/show/id/328
presentaties van deze activiteit https://booosting.nl/news/show/id/1356
Het Co-Creation Centre wordt nu gebouwd op The Green Village in Delft.
30 januari 2020 gaf Thijs Asselbergs op de beurs GEVEL2020 de presentatie Second Life, de architectuur van morgen, over "circular upcycle + re-design of façades".
Hoe kun je een aanpak maken om grote Rijksgebouwen en het grootse ziekenhuis van Nederland, het AMC, geschikt te maken voor 2050?
Thijs Asselbergs is hoogleraar Architectural Engineering op de TU Delft faculteit Bouwkunde.
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de tegenlezing van Rutger Snoek, bestuurslid Booosting en expert vastgoed Rijksvastgoedbedrijf.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie Nieuwe ontwikkelingen van Siliconen in de bouw van Valérie Hayez, Global Façade Engineering - Dow Silicones België.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie over het constructief ontwerp van Diana de Krom - projectleider constructies ABT.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie over het technisch ontwerp en de uitvoering van Wout Hoogendoorn, directeur Si-X.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie over het architectonisch ontwerp door
Armand Paardekooper Overman - architect/associate Mecanoo.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier het welkomstwoord van Hubert Linssen - programmamanager van The Green Village.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de introductie van Booosting voorzitter Robert Capel – Saleslead Octatube
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 16 januari 2020 is het onderzoek afgerond op Hanze Groningen met de presentatie van twee prototypen voor flexibele binnenwanden in het onderwijs. Hier de presentatie van de groep olv docent onderzoeker Clemens Bernardt.
.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 16 januari 2020 is het onderzoek afgerond op Hanze Groningen met de presentatie van twee prototypen voor flexibele binnenwanden in het onderwijs. Hier de presentatie van Atto Harsta en Rinke Feenstra van Aldus Bouwinnovatie: Meervoudig ruimtegebruik in een moderne leeromgeving.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 15 januari 2020 is het onderzoek afgerond met een eindevent. Hier de presentatie over de kansen van het gebruik van textiel in de bouw van Christian Struck, lector Sustainable Building Technology Saxion: Potential of textiles for building renovation.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 15 januari 2020 is het onderzoek afgerond met een eindevent. Hier de presentatie van studente Moeywadee Sakhun van een opvouwbare roomdivider van het nonwoven, kunststof vliesmateriaal Colback.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 15 januari 2020 is het onderzoek afgerond met een eindevent. Hier de studentenpresentatie van een binnenwand met een modulair kliksysteem van 100% pet-vilt, Flexitex.
More from Booosting platform voor koplopers in bouwinnovatie (20)
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
Booosting - 2015okt22 - 3D Concrete Printing - Bekaert
1.
2. Inspiration for High Demand
3D Concrete Printing
Sarah Van Bergen
Anne Hoekstra
22/10/2015
3. Introduction
Imagine a material that
provides you with nearly
unlimited possibilities to
build and develop your
projects…
3
Form freedom
Tensile & flexural strength
Ductility