The multimedia class cart has a desk top surface, pull out workspace, adjustable shelf, powder coated finish, and swivel casters with locks. It features a storage drawer that is 7 inches deep, 16 inches wide, and 17 inches long with an electronic keypad lock that is programmable. The drawer can fit a PC and doc cam. The batteries in the electronic lock can be changed by removing two AAA batteries with a Phillips screwdriver. If the batteries die while locked, a 9V battery can be used to charge the lock enough to open it. The drawer can also be removed by pulling up levers on both sides to access the lock screws.

1. Multimedia Class Cart

2. Cart Features
Desk Top Surface
Pull out
Workspace Rubber Impact Strip
Adjustable Shelf
Powder Coated
Finish
Left and Right Cable openings
External Power Cord
Reel
Swivel Casters with Locks
2

3. RM Classcart Lock & Drawer
Storage Drawer: 7 inch depth Electronic Keypad Lock
16 inches width and 17 inches length Programmable
Code is 0099, but you change if you desire.
3
PC and Doc Cam can fit in the drawer.
+

4. RM Classcart Lock Location

5. Changing the battery in the electronic lock
What you will need?
 Need a Phillips screw driver.
 Two, AAA Batteries
What happen if the battery dies when the door is locked?
If batteries die when cart is locked, you hold a 9 volt battery
to lock (by the sensors) and it charges enough to open the
lock.

6. Changing the battery in the electronic lock

7. Removing Classcart Drawer
If you have difficulty accessing the lock to change the battery,
you can remove the drawer from the cart:
Pull up levers on both sides of the
cart drawer and pull out the
drawer from the cart.
This allows you to access the cart
screws located on the back side of
the lock.