Blend MX08 Train & Tunnel Concrete Mixer
•
0 likes•569 views
The Blend MX08 mixer was designed for use on the Monte Ceneri Tunnel project in Switzerland, which will reduce travel time between Milan and Zurich by over an hour once completed in 2020. The Monte Ceneri tunnel requires two 15.4 km tunnels to be constructed, and six Blend MX08 mixers will be used to cast the concrete. The first test of the Blend MX08 was performed on April 28, 2017 and it will begin working inside the tunnel for concrete placement starting in July 2017.
Report
Share
Report
Share
Recommended
Concrete block making machine
The document summarizes the specifications and features of a block making machine. The machine can produce 69,120 blocks per 8-hour shift. It has a power of 33 kW, molding cycle of 15-20 seconds, operates at 380V and weighs 11.6 tons. Key features include using vibration technology to produce high-strength blocks, advanced welding and materials to withstand vibration, and synchronous vibration and movement systems for effective compaction. It also has hydraulic and cooling systems to prevent overheating in hot climates and provides installation, training, repairs and spare parts support.
Km145 wall plastering machine (wecompress)
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
7 th sem internship ppt (1)
The document summarizes a presentation on lining a main canal using Cementious Geo-synthetic Concrete Matress (CGCM). Some key points:
- CGCM is a flexible concrete-impregnated fabric that hardens on contact with water to form a durable, waterproof and fire-resistant concrete layer without needing plant/mixing equipment.
- It has advantages over traditional concrete lining like lower installation time and cost, very low maintenance needs, and ability to bridge cracks in existing infrastructure.
- The process involves dewatering, excavation, laying a sub-base and geotextile, placing and pumping concrete into the CGCM using a ramp for access. Key walls and fencing are also
CBI-Strassenvertiger EN
The document summarizes Chemobau's concrete paving technology which uses a special machine to automatically perform all necessary operations for concrete road construction. The machine can create roadways and profiles through two methods - the inset method and offset method. The inset method presses and models fresh concrete into the desired pavement form using robust formwork attached to the machine. Anchors and dowels are also automatically placed. The offset method transports supplied concrete within a formwork to shape monolithic profiles during forward movement. The machine lays concrete with high precision and quality for applications such as highways, airport runways, tunnels, and more.
Blockmakingmachine
This document summarizes the technical specifications and features of a brick making machine manufactured by Zhengzhou Kehai Heavy Industrial Machinery Co., Ltd. The machine has a hydraulic motor power of 15KW and 14KW, and can produce 14,400 large blocks or 38,400 blocks per day over 10 hours of operation. Key features include fully automatic operation, concealed hydraulic systems, programmable PLC control system, flexible production of various brick shapes and colors, durable molds, high-pressure vibration extraction, vibration damping technology, and precise sizing of finished products.
Design of boxel bridge for outer ring road connecting Balaghat-Amgaon-Kohmara...
This document provides the design report for a single cell box bridge being constructed on the Gondia to Balaghat Road in India. The bridge is 6 meters wide with a box structure made of reinforced concrete. Details provided include the design of the box structure, substructure, superstructure, and a total cost estimate of approximately 35 lakhs for the bridge construction.
E-3-31 Bang Na - Bang Pakong Expressway Bangkok Thailand
The document describes the construction of the elevated Bang Na Expressway in Thailand. A precasting plant was built 4.5 km from the expressway site to produce approximately 40,000 precast hollow box segments for the superstructure over a length of 55 km. Three types of box segments were produced using match casting, including large segments weighing up to 100 tons for the mainline. Production included other precast concrete parts over a 26 hectare storage area. The expressway eased traffic congestion between Bangkok and Chonburi when completed in 2000 after 4.5 years of construction.
Precast Six lane flyover project
This document provides details about the construction of a six lane precast flyover between Bhavanipuram and Kanaka Durga Varadhi. The flyover is 5.28km long and was contracted for 282.4 crores. It describes the various stages of construction including batch plant operations, casting yard procedures, substructure elements like piles and piers, superstructure segments like spines and wings, and stressing of rebar. Completion of the flyover is expected to significantly reduce traffic problems in the area.
Recommended
Concrete block making machine
The document summarizes the specifications and features of a block making machine. The machine can produce 69,120 blocks per 8-hour shift. It has a power of 33 kW, molding cycle of 15-20 seconds, operates at 380V and weighs 11.6 tons. Key features include using vibration technology to produce high-strength blocks, advanced welding and materials to withstand vibration, and synchronous vibration and movement systems for effective compaction. It also has hydraulic and cooling systems to prevent overheating in hot climates and provides installation, training, repairs and spare parts support.
Km145 wall plastering machine (wecompress)
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
7 th sem internship ppt (1)
The document summarizes a presentation on lining a main canal using Cementious Geo-synthetic Concrete Matress (CGCM). Some key points:
- CGCM is a flexible concrete-impregnated fabric that hardens on contact with water to form a durable, waterproof and fire-resistant concrete layer without needing plant/mixing equipment.
- It has advantages over traditional concrete lining like lower installation time and cost, very low maintenance needs, and ability to bridge cracks in existing infrastructure.
- The process involves dewatering, excavation, laying a sub-base and geotextile, placing and pumping concrete into the CGCM using a ramp for access. Key walls and fencing are also
CBI-Strassenvertiger EN
The document summarizes Chemobau's concrete paving technology which uses a special machine to automatically perform all necessary operations for concrete road construction. The machine can create roadways and profiles through two methods - the inset method and offset method. The inset method presses and models fresh concrete into the desired pavement form using robust formwork attached to the machine. Anchors and dowels are also automatically placed. The offset method transports supplied concrete within a formwork to shape monolithic profiles during forward movement. The machine lays concrete with high precision and quality for applications such as highways, airport runways, tunnels, and more.
Blockmakingmachine
This document summarizes the technical specifications and features of a brick making machine manufactured by Zhengzhou Kehai Heavy Industrial Machinery Co., Ltd. The machine has a hydraulic motor power of 15KW and 14KW, and can produce 14,400 large blocks or 38,400 blocks per day over 10 hours of operation. Key features include fully automatic operation, concealed hydraulic systems, programmable PLC control system, flexible production of various brick shapes and colors, durable molds, high-pressure vibration extraction, vibration damping technology, and precise sizing of finished products.
Design of boxel bridge for outer ring road connecting Balaghat-Amgaon-Kohmara...
This document provides the design report for a single cell box bridge being constructed on the Gondia to Balaghat Road in India. The bridge is 6 meters wide with a box structure made of reinforced concrete. Details provided include the design of the box structure, substructure, superstructure, and a total cost estimate of approximately 35 lakhs for the bridge construction.
E-3-31 Bang Na - Bang Pakong Expressway Bangkok Thailand
The document describes the construction of the elevated Bang Na Expressway in Thailand. A precasting plant was built 4.5 km from the expressway site to produce approximately 40,000 precast hollow box segments for the superstructure over a length of 55 km. Three types of box segments were produced using match casting, including large segments weighing up to 100 tons for the mainline. Production included other precast concrete parts over a 26 hectare storage area. The expressway eased traffic congestion between Bangkok and Chonburi when completed in 2000 after 4.5 years of construction.
Precast Six lane flyover project
This document provides details about the construction of a six lane precast flyover between Bhavanipuram and Kanaka Durga Varadhi. The flyover is 5.28km long and was contracted for 282.4 crores. It describes the various stages of construction including batch plant operations, casting yard procedures, substructure elements like piles and piers, superstructure segments like spines and wings, and stressing of rebar. Completion of the flyover is expected to significantly reduce traffic problems in the area.
Blend recycling en asphalt
Using 100% milled asphalt and bitumen emulsions allows for cold asphalt recycling that produces a high quality product without heating materials. This process saves on raw materials by using 50% of the bitumen already contained in milled asphalt. The recycled asphalt hardens with compaction to be used in road construction and repair.
Blend recycling asphalt pavement
Using 100% milled asphalt and bitumen emulsions allows for cold asphalt recycling that produces a high quality product without heating materials. This process saves on raw materials by using 50% of the bitumen already contained in milled asphalt. The recycled asphalt hardens through compaction.
Dorner Batch Control
El documento describe las ventajas del sistema de control Dorner para plantas de concreto, incluyendo su interfaz intuitiva, precisión en dosificación, producción eficiente, seguridad y control, acceso remoto, innovación tecnológica e integración con otros sistemas. El sistema ofrece un diseño intuitivo para operarlo fácilmente, realiza ajustes automáticos para optimizar la calidad y rapidez de producción, y proporciona seguridad mediante el registro y rastreo de todas las acciones de los usuarios.
Blend Equipos de Concreto
Este documento describe varios proyectos y usos para una planta de concreto móvil, incluyendo el desarrollo de viviendas en zonas remotas, proyectos de interés social, proyectos de construcción con varias grúas, resorts con diferentes tipos y volúmenes de concreto requeridos, infraestructura como reparación de carreteras y túneles, estabilización de suelos rurales, consolidación de barrios, y la capacidad de despachar volúmenes pequeños de concreto. La planta mó
Blend MX08 Train & Tunnel
The Blend MX08 mixer was designed for use on the Monte Ceneri Tunnel project in Switzerland, which will reduce travel time between Milan and Zurich by over an hour once completed in 2020. The Monte Ceneri tunnel requires two 15.4 km tunnels to be constructed, and six Blend MX08 mixers will be used to cast the concrete. The first test of the Blend MX08 was conducted on April 28, 2017, and it will begin working inside the tunnel for concrete placement starting in July 2017.
Concrete Reclaimer & Mixer Truck Washout
The document compares sedimentation pools and filter presses for treating slurry water from concrete production. Filter presses provide advantages over sedimentation pools by producing reusable dry cement cake and clear water in a more automated, compact system that requires less area and fewer workers. This reduces costs, risks of accidents, and environmental impact compared to sedimentation pools which produce mud and grey water requiring more handling by workers and heavy machinery.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
More Related Content
More from Ricardo Vegas
Blend recycling en asphalt
Using 100% milled asphalt and bitumen emulsions allows for cold asphalt recycling that produces a high quality product without heating materials. This process saves on raw materials by using 50% of the bitumen already contained in milled asphalt. The recycled asphalt hardens with compaction to be used in road construction and repair.
Blend recycling asphalt pavement
Using 100% milled asphalt and bitumen emulsions allows for cold asphalt recycling that produces a high quality product without heating materials. This process saves on raw materials by using 50% of the bitumen already contained in milled asphalt. The recycled asphalt hardens through compaction.
Dorner Batch Control
El documento describe las ventajas del sistema de control Dorner para plantas de concreto, incluyendo su interfaz intuitiva, precisión en dosificación, producción eficiente, seguridad y control, acceso remoto, innovación tecnológica e integración con otros sistemas. El sistema ofrece un diseño intuitivo para operarlo fácilmente, realiza ajustes automáticos para optimizar la calidad y rapidez de producción, y proporciona seguridad mediante el registro y rastreo de todas las acciones de los usuarios.
Blend Equipos de Concreto
Este documento describe varios proyectos y usos para una planta de concreto móvil, incluyendo el desarrollo de viviendas en zonas remotas, proyectos de interés social, proyectos de construcción con varias grúas, resorts con diferentes tipos y volúmenes de concreto requeridos, infraestructura como reparación de carreteras y túneles, estabilización de suelos rurales, consolidación de barrios, y la capacidad de despachar volúmenes pequeños de concreto. La planta mó
Blend MX08 Train & Tunnel
The Blend MX08 mixer was designed for use on the Monte Ceneri Tunnel project in Switzerland, which will reduce travel time between Milan and Zurich by over an hour once completed in 2020. The Monte Ceneri tunnel requires two 15.4 km tunnels to be constructed, and six Blend MX08 mixers will be used to cast the concrete. The first test of the Blend MX08 was conducted on April 28, 2017, and it will begin working inside the tunnel for concrete placement starting in July 2017.
Concrete Reclaimer & Mixer Truck Washout
The document compares sedimentation pools and filter presses for treating slurry water from concrete production. Filter presses provide advantages over sedimentation pools by producing reusable dry cement cake and clear water in a more automated, compact system that requires less area and fewer workers. This reduces costs, risks of accidents, and environmental impact compared to sedimentation pools which produce mud and grey water requiring more handling by workers and heavy machinery.
More from Ricardo Vegas (6)
Recently uploaded
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recently uploaded (20)
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Blend MX08 Train & Tunnel Concrete Mixer
- 7. Blend MX08 mixer was designed for the realization of the Monte Ceneri Tunnel: once finished (in 2020), this tunnel will reduce the travel time from Milan to Zurigo by about 1 hour and 15 minutes. This is an important project for all Europe: delays are not allowed! Best executive quality is required! Monte Ceneri tunnel needs to have 2 tunnels of 15,4 Km/ each: n. 6 Blend MX08 will be there to cast concrete! The first test was performed on 28th April 2017: Blend MX08 will start work inside the tunnel from July 2017.
- 8. Designed for: Ceneri Base Tunnel in Switzerland Transport of concrete in tunnel for track concreting BODY: Hopper frame in Hardox steel for concrete transport SCREW: Anti-segregation agitating screw in Hardox steel DRIVE: Hydraulic system operated by on-board engine CLEANING: Automatic pressure cleaning system for the hopper PROJECTSPECIFICATIONS
- 9. MX08 MAINCHARACTERISTICS Sourceofpower Diesel Engine Concretecapacity 8 m3 Motor 100 Kw Discharge 3 independent frontal screws Agitator 1150 mm diam. auger Command On-board & Remote controled Weight 7 T Water 1.000 Lt Length 7,5 mt
- 10. v Hopper in Hardox to hold 8m3 ofconcrete v Auger with a diameter of 1.150 mm to mix the concrete: in this way we avoidsegregation during transport v 120 kW motor + hydraulic system to mix and discharge concrete v Discharge with 3 augers together with3 chutes v Hydraulic piston on each auger to control the cast v Shutter on each auger to control the instant flow of concrete tocast v Augers are not on tracks, in this way there is no deposit of concrete in the hopper v Automatic greasingsystem v Pre-wash system at high pressure v 2 water tanks of 500 Lt each v A big dieseltank v 3 lateral doors for inspection/maintenance