A_VD_WESTHUIZEN_Lead_Auditors_Certificate
•
0 likes•107 views
This document is a certificate issued to A VD WESTHUIZEN for successfully completing a Quality Management Systems Auditor/Lead Auditor Training Course based on the ISO 9001:2008 standard. The course was registered by the International Register of Certificated Auditors and allows for IRCA membership application within 3 years. The dates of the course were August 8-12, 2020 and it was held at Advantage ACT in Pretoria, South Africa.
Report
Share
Report
Share
Download to read offline
Recommended
ISO - SKILLWISE ACADEMY
This certificate confirms that Skillwise Academy's quality management system has been assessed and found to conform to the requirements of ISO 9001:2008. The certificate is valid from January 9, 2015 until January 9, 2018, and remains valid subject to satisfactory annual surveillance audits in 2016 and 2017. Recertification is due on January 9, 2018.
AAT
Reg Ho passed the AAT Final Examination in January 2013, as certified by the Examination Committee of the Technicians of The Association of Accounting Sri Lanka. The certificate confirms he passed the exam but does not constitute membership in the Association, which also requires satisfactory completion of practical training.
Changing the way you think about RTO services
Gaadiwalaonline.com provides expedited RTO services in India, including processing RTO requirements and forms, arranging inspections, and delivering certificates and permits quickly. Their search tool provides detailed RTO information available 24/7. Representatives greet drivers and ensure the inspection process goes smoothly. They can also arrange any needed RTO products like reflective items or number plates at the inspection location.
ISO AUDITOR
Shakeel Shahid successfully completed a Quality Management Systems Auditor/Lead Auditor Training course from May 20-24, 2013 by passing the written examination and continuous assessment. The course was held by SGS Pakistan (Private) Limited and meets the formal training requirements for IRCA auditor certification. This certificate is valid for three years from the date of completion.
Aqsiq license_CCIC Certificate
This document contains responses to questions about applying for and obtaining pre-shipment inspection certificates for scrap materials from China Customs Certification & Inspection Co., Ltd (CCIC Australia). Specifically:
- Only overseas suppliers of scrap materials with valid AQSIQ licenses can apply for CCIC certificates, not consignees.
- A successful application requires a completed self-inspection report, inspection record, and bill of lading. Loading photos are also required to match the approved certificate.
- The self-inspection report must list the AQSIQ license holder as shipper, not the shipping line. Container and seal numbers must be capitalized.
- Loading photos must show half and full
Certified Administrative Professtional
This certificate awards Wong Chee Wai for completing a 2-hour continuing education course in Certified Administrative Professional (CAP) provided by Cybrary on March 10, 2018. Ralph P. Sita, CEO of Cybrary, confirms the completion with certificate number C-83a665a97-b2901b395.
G3087112Q_SVCF-PL-101C-1_160000000423757
This document is a Statement of Attainment awarded to Tan Mei Shu on July 16, 2016 from ROHEI CORPORATION PTE. LTD. for successfully completing the industry approved competency of SVCF-PL-101C-1 Implement Operations for Service Excellence. The training and assessment were accredited under the Singapore Workforce Skills Qualification System by the Singapore Workforce Development Agency.
S7234046I_SE-SO-118E-0_150000000122301 (1)
This statement of attainment is awarded to STIENBERG TAN GEOK YONG (CHEN YURONG) on 14 March 2015 for successfully completing industry approved competencies in performing investigation activities in compliance with legal requirements. The training and assessment were accredited under the Singapore Workforce Skills Qualification System, as verified by Ng Cher Pong, Chief Executive of POLWEL CO-OPERATIVE SOCIETY LIMITED.
Recommended
ISO - SKILLWISE ACADEMY
This certificate confirms that Skillwise Academy's quality management system has been assessed and found to conform to the requirements of ISO 9001:2008. The certificate is valid from January 9, 2015 until January 9, 2018, and remains valid subject to satisfactory annual surveillance audits in 2016 and 2017. Recertification is due on January 9, 2018.
AAT
Reg Ho passed the AAT Final Examination in January 2013, as certified by the Examination Committee of the Technicians of The Association of Accounting Sri Lanka. The certificate confirms he passed the exam but does not constitute membership in the Association, which also requires satisfactory completion of practical training.
Changing the way you think about RTO services
Gaadiwalaonline.com provides expedited RTO services in India, including processing RTO requirements and forms, arranging inspections, and delivering certificates and permits quickly. Their search tool provides detailed RTO information available 24/7. Representatives greet drivers and ensure the inspection process goes smoothly. They can also arrange any needed RTO products like reflective items or number plates at the inspection location.
ISO AUDITOR
Shakeel Shahid successfully completed a Quality Management Systems Auditor/Lead Auditor Training course from May 20-24, 2013 by passing the written examination and continuous assessment. The course was held by SGS Pakistan (Private) Limited and meets the formal training requirements for IRCA auditor certification. This certificate is valid for three years from the date of completion.
Aqsiq license_CCIC Certificate
This document contains responses to questions about applying for and obtaining pre-shipment inspection certificates for scrap materials from China Customs Certification & Inspection Co., Ltd (CCIC Australia). Specifically:
- Only overseas suppliers of scrap materials with valid AQSIQ licenses can apply for CCIC certificates, not consignees.
- A successful application requires a completed self-inspection report, inspection record, and bill of lading. Loading photos are also required to match the approved certificate.
- The self-inspection report must list the AQSIQ license holder as shipper, not the shipping line. Container and seal numbers must be capitalized.
- Loading photos must show half and full
Certified Administrative Professtional
This certificate awards Wong Chee Wai for completing a 2-hour continuing education course in Certified Administrative Professional (CAP) provided by Cybrary on March 10, 2018. Ralph P. Sita, CEO of Cybrary, confirms the completion with certificate number C-83a665a97-b2901b395.
G3087112Q_SVCF-PL-101C-1_160000000423757
This document is a Statement of Attainment awarded to Tan Mei Shu on July 16, 2016 from ROHEI CORPORATION PTE. LTD. for successfully completing the industry approved competency of SVCF-PL-101C-1 Implement Operations for Service Excellence. The training and assessment were accredited under the Singapore Workforce Skills Qualification System by the Singapore Workforce Development Agency.
S7234046I_SE-SO-118E-0_150000000122301 (1)
This statement of attainment is awarded to STIENBERG TAN GEOK YONG (CHEN YURONG) on 14 March 2015 for successfully completing industry approved competencies in performing investigation activities in compliance with legal requirements. The training and assessment were accredited under the Singapore Workforce Skills Qualification System, as verified by Ng Cher Pong, Chief Executive of POLWEL CO-OPERATIVE SOCIETY LIMITED.
Arthur af22 v2
This document provides an update from the Head of Member Services at AFRINIC. It discusses AFRINIC's commitments for 2015, which include increasing membership base, providing service excellence, and increasing member satisfaction. Membership has increased 15% over 2014, reaching 1216 total members as of May 2015. AFRINIC has also taken steps to improve registration services, certification processes, and gather feedback to further improve member experience. A survey will be conducted in 2016 to collect additional feedback.
Hope HA Record of Results no 19 2015
Haley Ann Hope has completed a Blended Learning program in Wealth Management through RSC, which was assessed, moderated, and verified by INSETA in November 2013. She obtained 47 credits through RSC and had existing credits from previous assessment, bringing her total credits to 133. Haley Ann Hope has met the requirements for the full National Certificate in Wealth Management qualification, and INSETA will issue her a certificate.
Sap Business One Compliance Consultant Program certificate
This document confirms that Exequiel Masciocchi passed the qualification test for the Compliance Consultant Program on March 26, 2020. The document was automatically generated with the user ID S0021785912 and no signature is required for validation.
Invite to OQC members_Josephine Naicker
The document is a letter nominating Josephine Naicker to the Occupational Qualifications' Committee (OQC) of the Leadership Academy of Guardians of Governance. The Academy was established by the Institute of Internal Auditors South Africa to oversee qualifications as an independent body. The OQC reviews and advises on improving the management of occupational qualifications by the Academy Board. Naicker is identified as a suitable person to contribute to the work of the OQC and enhance the quality of the internal audit profession. She is invited to participate as an OQC member and asked to complete the attached reply slip by March 24th confirming her availability.
Transcript
This document is an unofficial transcript for a student in the Robotics and Industrial Automation program. It shows the student's coursework, grades, grade point averages, and academic standing over 3 terms, including a co-op work term in Fall 2015. The student has maintained a program GPA above 3.0 and is eligible to continue in the program.
Allen Witter
Allen Witter has been designated as a Certified IPC Trainer with serial number J001-T1805338140. He is authorized to conduct J-STD-001 Application Specialist Training. This certificate confirms he has met all requirements to be a Certified IPC Trainer and can use the CIT designation. He is authorized to provide the industry approved training and skills assessment to certify others in accordance with IPC Training and Certification Policy.
5S_Kaizen Bulletin_No61
The document summarizes the implementation of 5S3R (5S and 3R) in six pilot areas at the JTI Wervik-Gryson factory over the past year. It describes conducting a pre-assessment in April 2014 that found an average score of 38% across the areas. After establishing a 5S3R team and training, scores improved significantly, with a post-assessment in January 2015 finding an average of 84%. The 5S3R implementation has led to benefits like a cleaner work environment, reduced searching and lost/damaged items, and improved employee commitment. The goal is to achieve "Best in Class" certification for all six pilot areas by April 2015.
Medical Device Registration in Pakistan
The document outlines the steps an applicant must take to register a medical device in Pakistan under the Medical Devices Rules 2015, which includes determining if the product is a medical device, classifying and grouping the device, conducting a conformity assessment and collecting evidence, appointing a conformity assessment body to assess conformity, and applying for registration if all requirements are met.
Principled Decision Making
This certificate of completion certifies that Rajib Gain successfully completed the Principled Decision Making—I course from the LRN Legal Compliance and Ethics Center on June 10, 2015. The course number is ETH013-a72enIE and the certificate number is 156237 87885519.
Process flow for medical device registration in srilanka
The document outlines the steps an applicant must take to obtain registration and an import license for medical devices in Sri Lanka. An application is submitted and evaluated, with the option to obtain a sample license after registration is approved. If unsatisfactory, the dossier is further evaluated before a final decision on registration is made.
Transcript_Basil
This document is an unofficial transcript for Basil Varghese who completed the Robotics and Industrial Automation program at a college in Ontario, Canada. It shows his coursework, grades, grade point averages (GPAs) per session, and that he graduated in April 2015 with a Graduate Certificate and a program GPA of 3.85. The transcript is dated June 2015 and issued by the Registrar's Office.
Medical Device establishment licensing
Steps taken before application for Establishment License Under Medical Devices Rules 2015 in Pakistan
Scaffolding Inspector
This certificate certifies that S.M. Mokoena with ID number 821007 5333 085 successfully completed training and testing to become a Scaffolding Inspector with US ID number 258923. The training period was from May 20, 2014 to the expiration date of May 20, 2016 as verified by the facilitator and assessor signatures.
KenLesterCertificate
Kenneth Lester is certified as an IPC Trainer with serial number 620-T 4805839208 and is authorized to conduct IPC/WHMA-A-620 Application Specialist Training. This certificate confirms he has met all requirements to be a Certified IPC Trainer and can use the CIT designation, convey application-level certification, and maintain certification by providing approved training using IPC materials according to their policy.
Visiontech letter
This certificate from Visiontech Systems International LLC confirms that Ahmed Adel Rashad Elshafey worked as a Network Support Engineer from April 2014 to April 2015, during which time his performance was good. The certificate provides Elshafey's employment details including his position, dates of employment, and an assessment of his work performance to assist with future employment applications.
Understanding Principled Decision Making
This certificate of completion certifies that Rajib Gain successfully completed the Understanding Principled Decision Making I course from the LRN Legal Compliance and Ethics Center on June 10, 2015. The course number is ETH014-i77enIE and the certificate was generated on June 11, 2015.
Mr. Sunil Jethani ISOTraining Certificate
Sunil Jethani has successfully completed a two-day training course on ISO9001:2008 Quality Management Systems and internal auditing. The course provided an introduction to quality management systems and how to conduct internal audits according to ISO 19011:2002 standards. The training took place in Dubai from June 2-3, 2010 and was authorized by the general manager of TATWEER, the training organization.
ISO 13053 Lead Auditor - One Page Brochure
MASTERING THE AUDIT OF QUANTITATIVE METHODS IN PROCESS IMPROVEMENT – SIX SIGMA
BASED ON ISO 13053, IN COMPLIANCE WITH THE REQUIREMENTS OF ISO 19011 AND ISO 17021
CCNA
CCNA is an information technology certification from Cisco Systems. CCNA certification is an associate-level Cisco Career certification. The Cisco exams have changed several times in response to the changing IT trends
Implementation Specialist certificate
Mr Ayodeji Ladejobi successfully completed and passed the Implementation Specialist V6.60 course in 2012, achieving a score of 78.85%. The certificate, with ID number C17031, was issued by Avril Zanato as Training Manager.
More Related Content
What's hot
Arthur af22 v2
This document provides an update from the Head of Member Services at AFRINIC. It discusses AFRINIC's commitments for 2015, which include increasing membership base, providing service excellence, and increasing member satisfaction. Membership has increased 15% over 2014, reaching 1216 total members as of May 2015. AFRINIC has also taken steps to improve registration services, certification processes, and gather feedback to further improve member experience. A survey will be conducted in 2016 to collect additional feedback.
Hope HA Record of Results no 19 2015
Haley Ann Hope has completed a Blended Learning program in Wealth Management through RSC, which was assessed, moderated, and verified by INSETA in November 2013. She obtained 47 credits through RSC and had existing credits from previous assessment, bringing her total credits to 133. Haley Ann Hope has met the requirements for the full National Certificate in Wealth Management qualification, and INSETA will issue her a certificate.
Sap Business One Compliance Consultant Program certificate
This document confirms that Exequiel Masciocchi passed the qualification test for the Compliance Consultant Program on March 26, 2020. The document was automatically generated with the user ID S0021785912 and no signature is required for validation.
Invite to OQC members_Josephine Naicker
The document is a letter nominating Josephine Naicker to the Occupational Qualifications' Committee (OQC) of the Leadership Academy of Guardians of Governance. The Academy was established by the Institute of Internal Auditors South Africa to oversee qualifications as an independent body. The OQC reviews and advises on improving the management of occupational qualifications by the Academy Board. Naicker is identified as a suitable person to contribute to the work of the OQC and enhance the quality of the internal audit profession. She is invited to participate as an OQC member and asked to complete the attached reply slip by March 24th confirming her availability.
Transcript
This document is an unofficial transcript for a student in the Robotics and Industrial Automation program. It shows the student's coursework, grades, grade point averages, and academic standing over 3 terms, including a co-op work term in Fall 2015. The student has maintained a program GPA above 3.0 and is eligible to continue in the program.
Allen Witter
Allen Witter has been designated as a Certified IPC Trainer with serial number J001-T1805338140. He is authorized to conduct J-STD-001 Application Specialist Training. This certificate confirms he has met all requirements to be a Certified IPC Trainer and can use the CIT designation. He is authorized to provide the industry approved training and skills assessment to certify others in accordance with IPC Training and Certification Policy.
5S_Kaizen Bulletin_No61
The document summarizes the implementation of 5S3R (5S and 3R) in six pilot areas at the JTI Wervik-Gryson factory over the past year. It describes conducting a pre-assessment in April 2014 that found an average score of 38% across the areas. After establishing a 5S3R team and training, scores improved significantly, with a post-assessment in January 2015 finding an average of 84%. The 5S3R implementation has led to benefits like a cleaner work environment, reduced searching and lost/damaged items, and improved employee commitment. The goal is to achieve "Best in Class" certification for all six pilot areas by April 2015.
Medical Device Registration in Pakistan
The document outlines the steps an applicant must take to register a medical device in Pakistan under the Medical Devices Rules 2015, which includes determining if the product is a medical device, classifying and grouping the device, conducting a conformity assessment and collecting evidence, appointing a conformity assessment body to assess conformity, and applying for registration if all requirements are met.
Principled Decision Making
This certificate of completion certifies that Rajib Gain successfully completed the Principled Decision Making—I course from the LRN Legal Compliance and Ethics Center on June 10, 2015. The course number is ETH013-a72enIE and the certificate number is 156237 87885519.
Process flow for medical device registration in srilanka
The document outlines the steps an applicant must take to obtain registration and an import license for medical devices in Sri Lanka. An application is submitted and evaluated, with the option to obtain a sample license after registration is approved. If unsatisfactory, the dossier is further evaluated before a final decision on registration is made.
Transcript_Basil
This document is an unofficial transcript for Basil Varghese who completed the Robotics and Industrial Automation program at a college in Ontario, Canada. It shows his coursework, grades, grade point averages (GPAs) per session, and that he graduated in April 2015 with a Graduate Certificate and a program GPA of 3.85. The transcript is dated June 2015 and issued by the Registrar's Office.
Medical Device establishment licensing
Steps taken before application for Establishment License Under Medical Devices Rules 2015 in Pakistan
Scaffolding Inspector
This certificate certifies that S.M. Mokoena with ID number 821007 5333 085 successfully completed training and testing to become a Scaffolding Inspector with US ID number 258923. The training period was from May 20, 2014 to the expiration date of May 20, 2016 as verified by the facilitator and assessor signatures.
KenLesterCertificate
Kenneth Lester is certified as an IPC Trainer with serial number 620-T 4805839208 and is authorized to conduct IPC/WHMA-A-620 Application Specialist Training. This certificate confirms he has met all requirements to be a Certified IPC Trainer and can use the CIT designation, convey application-level certification, and maintain certification by providing approved training using IPC materials according to their policy.
Visiontech letter
This certificate from Visiontech Systems International LLC confirms that Ahmed Adel Rashad Elshafey worked as a Network Support Engineer from April 2014 to April 2015, during which time his performance was good. The certificate provides Elshafey's employment details including his position, dates of employment, and an assessment of his work performance to assist with future employment applications.
Understanding Principled Decision Making
This certificate of completion certifies that Rajib Gain successfully completed the Understanding Principled Decision Making I course from the LRN Legal Compliance and Ethics Center on June 10, 2015. The course number is ETH014-i77enIE and the certificate was generated on June 11, 2015.
Mr. Sunil Jethani ISOTraining Certificate
Sunil Jethani has successfully completed a two-day training course on ISO9001:2008 Quality Management Systems and internal auditing. The course provided an introduction to quality management systems and how to conduct internal audits according to ISO 19011:2002 standards. The training took place in Dubai from June 2-3, 2010 and was authorized by the general manager of TATWEER, the training organization.
ISO 13053 Lead Auditor - One Page Brochure
MASTERING THE AUDIT OF QUANTITATIVE METHODS IN PROCESS IMPROVEMENT – SIX SIGMA
BASED ON ISO 13053, IN COMPLIANCE WITH THE REQUIREMENTS OF ISO 19011 AND ISO 17021
CCNA
CCNA is an information technology certification from Cisco Systems. CCNA certification is an associate-level Cisco Career certification. The Cisco exams have changed several times in response to the changing IT trends
Implementation Specialist certificate
Mr Ayodeji Ladejobi successfully completed and passed the Implementation Specialist V6.60 course in 2012, achieving a score of 78.85%. The certificate, with ID number C17031, was issued by Avril Zanato as Training Manager.
What's hot (20)
Sap Business One Compliance Consultant Program certificate
Sap Business One Compliance Consultant Program certificate
Process flow for medical device registration in srilanka
Process flow for medical device registration in srilanka
Viewers also liked
Mastery in Abilities - Do-opedia
The document discusses three key abilities for mastery: innovation, communication, and collaboration. It provides guidance on innovating through creativity and out-of-the-box thinking. For communication mastery, it emphasizes effective writing and speaking through clarity as well as active listening comprehension. Finally, it stresses the importance of collaboration through working well with others and providing/receiving help to accomplish goals. Pithy quotes are provided for each ability to inspire development.
ACONEX-workflow System
This document provides step-by-step instructions for using Aconex to manage a project workflow for the FSP-KL project. It outlines 6 steps for reviewing documents received from the main contractor, including downloading documents, selecting a review outcome, adding consultant comments, replacing files with consultant signatures, and submitting documents. It also describes how to create sub-workflows to secondary consultants for additional input, including selecting items to sub-workflow, starting the sub-workflow, inputting information, selecting participants, and submitting.
Viewers also liked (6)
Similar to A_VD_WESTHUIZEN_Lead_Auditors_Certificate
ISO CERTIFICATE
This certificate documents Allan Olimpo Almarines' successful completion of a Quality Management Systems Auditor/Lead Auditor Training Course based on the ISO 9001:2008 standard. The course was registered with the International Register of Certificated Auditors and allows for IRCA membership application within 3 years. The certificate provides details of the course number, dates attended, and is issued by BSCIC Certifications Pvt. Ltd.
Iso 9001 lead auditor training in kolkata
ISO 9001 Lead Auditor Training in Kolkata is designed and delivered by EAS real time experienced auditors. EAS is an approved training partner of CQI- IRCA and its ISO 9001:2015 course in Kolkata is approved by CQI-IRCA.
Audit
This presentation summarizes the process of auditing a bank. It discusses the different types of audits conducted on banks in Bangladesh, including statutory audit, revenue/expenditure audit, and concurrent audit. It outlines the stages of a bank audit, which includes preliminary work, evaluating internal controls, preparing an audit program, executing substantive testing, and preparing an audit report. Key provisions related to bank audits in Bangladesh are also summarized, such as requirements regarding reserves, cash ratios, restrictions on loans, and regulatory reporting. The approaches taken by Bangladesh bank audits are briefly described.
CCBA Certification Overview
The document discusses the CCBA certification from the International Institute of Business Analysis. It is a Level 2 certification for mid-level business analysts that requires a minimum of 3,750 hours of business analysis experience over 7 years. The 130 question, 3 hour exam covers the 6 knowledge areas of the BABOK guide. Requirements for eligibility, fees, exam pattern and scoring are also outlined.
API 653 / QC / TPI Inspector
#Inspector #Inspection #Mechanical #hiring #CV #Resume #Aramco #Saudi Aramco #Project #SABIC #NEOM #AEOM #TUV #TPI #Structure #StorageTanks #Job #Looking #VID #CBT #QM #experience #Saudi Arabia #KSA #freelancer #SGS #BV #bureauveritas #tuvAustria #NDT #construction #MechanicalInspector #API #API653 #QC #Documentcontrol #TPI #TPI Inspector
BN12015 THERMAL ENGITECH ISO
This document certifies that Thermal Engitech Pvt. Ltd., with two manufacturing units located in Ahmedabad, Gujarat, India, has been granted certificate number BN12015/10835:0315BN12015/10835:0315BN12015/10835:0315BN12015/10835:0315 to manufacture, supply, and export steam boilers, thermic fluid heaters, industrial hot water generators, pressure vessels, furnaces, hot air generators, and pressure reducing stations. The certificate is valid until March 6, 2018 subject to successful annual surveillance audits on or before March 1, 2016 and March 1, 2017.
How to Prepare for ASQ Calibration Technician (CCT) Exam?
Click Here---> https://bit.ly/3HFBYpa <---Get complete detail on CCT exam guide to crack Technician. You can collect all information on CCT tutorial, practice test, books, study material, exam questions, and syllabus. Firm your knowledge on Technician and get ready to crack CCT certification. Explore all information on CCT exam with number of questions, passing percentage and time duration to complete test.
TQCSI Promo Material 2015
TQCSI International is a large certification body that operates globally. It is accredited to certify organizations to various management system standards, including ISO 9001, ISO 14001, ISO 45001, ISO 22000, and more. TQCSI prides itself on providing a professional certification process and adding value through thorough audit reports, expedited certification, and online tools and resources for clients. The document provides details on TQCSI's scope of accreditation, certification services, processes, tools, and goals of working in partnership with clients.
sevottam certification 21112022.pptx
This document provides an overview of the Sevottam model for excellence in public service delivery in India. Key points include:
- Sevottam is an assessment and improvement model developed by the Indian government to improve quality of public services.
- It provides a framework for public organizations to assess and improve their services based on a quality standard for service delivery.
- The model aims to bring transparency, accountability, and citizen-centricity to government service provision. Certification under Sevottam involves a self-assessment and audit process to evaluate compliance with the quality standard.
NBQC Company Brochure - 11
This document provides information on NBQC & Inspection Services' vision and services. Their vision is to identify value-add opportunities for businesses by focusing on customer satisfaction and quality. They offer a range of consulting services including lean management principles, business management systems, quality compliance auditing, work health and safety, and welding technology. They have over 25 years of experience in the mining and manufacturing sectors implementing standards and legislation to meet customer expectations.
Fit4 Business
FIT$BUSINESS: Cisco Channel Partners helpen een Cisco partner te worden, te blijven of zelfs te helpen een hogere status te bemachtigen – van Select tot Gold Partner Status
NS Automotive QSP
This document summarizes the quality procedures for controlling documents, records, internal audits, non-conforming products, and corrective and preventive actions at NS Automotive Ltd. It establishes processes for document control, record retention, conducting internal audits, handling non-conforming products, and implementing corrective and preventive actions. Key responsibilities are assigned to ensure effective management of these quality system elements.
Ca cpt
The document provides information about the Chartered Accountancy (CA) course and career in India. It discusses what CA is, the demand for CAs globally and in India, career prospects, earnings potential, and the stages of the CA course - CPT, IPCC, and Finals. It outlines the subjects covered at each stage, important dates, registration fees, and the process to become a qualified CA, including articleship training. Overall, CA is positioned as a highly respected career with opportunities in jobs, practice, business, and a wide range of industries.
ISO 9001 overview
ISO 9001 is an internationally recognized quality management system standard that can be used by any organization. It helps organizations ensure they meet customer and regulatory requirements through an effective quality management system. The standard contains requirements for establishing processes around quality management, documentation, operational control, monitoring customer satisfaction, and continual improvement. Implementing ISO 9001 involves understanding the standard, assessing your current system, creating documentation, training staff, conducting internal audits, and undergoing a certification audit by an external registrar.
Lead Auditor OHSAS18001 Certificate
Ra'ed K. A. H. Naser successfully completed an Occupational Health & Safety (OH&S) Management Systems Auditor/Lead Auditor Training Course in Amman, Jordan from November 9-13, 2014. The 5-day course, administered by SGS Jordan, covered the formal training requirements to become certified as an OH&S auditor under the International Register of Certificated Auditors. Naser passed the written examination and received an excellent rating for continuous assessment. The certificate is valid for three years for purposes of IRCA auditor certification.
Lean Six Sigma Green Belt
Certificate of Achievement from International Management Consultancy for successfully completing the Lean Six Sigma Green Belt program.
SACPCMP
Joseph Muzikayise Makhanya has submitted an application for registration in the Construction Health and Safety discipline. This letter acknowledges receipt of the application, which included all required supporting documents. The Council is currently experiencing a backlog in processing applications due to high volumes received this year. The applicant's online tracking ID is provided, which is to be used solely for tracking the application status online and is not a registration number.
BSI 2018 training calendar master.
The document provides a schedule of training courses offered by BSI in various certification standards and management systems. The courses range from 1 to 5 days and cover topics such as ISO 50001 (energy management), ISO 55001 (asset management), ISO 37001 (anti-bribery), ISO 9001 (quality management), ISO 27001 (information security), OHSAS 18001/ISO 45001 (occupational health and safety), ISO 31000 (risk management), ISO 13485 (medical devices), ISO 20000 (IT service management), ISO 14001 (environmental management), ISO 22301 (business continuity), and risk management. The schedule also provides dates, locations, fees and contact information for the training courses.
Maheswaran Resume
The document provides information about an individual with experience in mechanical engineering, quality assurance, and project management. It includes a summary of 16 years of experience in valves, pumps, quality control, supplier development, and process improvements. It also lists education and certification in areas such as six sigma, ISO standards, and valve repair. The objective is seeking a position to utilize skills and contribute to organizational goals.
Neeraj Khungar 600-455
The document provides the results of a Cisco certification exam taken by Neeraj Khungar on December 21, 2015. It includes the score breakdown by section, with an overall score of 790 out of 1000, above the passing score of 600. The exam was on designing Cisco Unified Contact Center Enterprise solutions. The report emphasizes that the preliminary score may be reclassified and provides next steps and policies around certification status and retaking exams.
Similar to A_VD_WESTHUIZEN_Lead_Auditors_Certificate (20)
How to Prepare for ASQ Calibration Technician (CCT) Exam?
How to Prepare for ASQ Calibration Technician (CCT) Exam?
A_VD_WESTHUIZEN_Lead_Auditors_Certificate
- 1. QUALITY MANAGEMENT SYSTEMS TRAINING For IRCA Membership application to be made within 3 Years from last day of course Course Number A17581 is registered by International Register of Certificated Auditors (IRCA) www.bsc-icc.com Awarded to: A VD WESTHUIZEN Hereby issued the Certificate Number: BTQ/C162/01:0715 Subsequent to the Successful Completion and Passing the Examination of the Quality Management Systems Auditor/Lead Auditor Training Course based on ISO 9001:2008 Standard For BSCIC CERTIFICATIONS PVT. LTD.:For BSCIC CERTIFICATIONS PVT. LTD.:For BSCIC CERTIFICATIONS PVT. LTD.:For BSCIC CERTIFICATIONS PVT. LTD.: Originally Issued: 06060606————00007777————2020202015151515 Page: 1 of 1 A17581 Sanjay SethSanjay SethSanjay SethSanjay Seth Managing DirectorManaging DirectorManaging DirectorManaging Director Course Dates: 08080808————00006666————2020202015151515 TOTOTOTO 12121212————00006666————2020202015151515 At Advantage ACT, Pretoria, South Africa