Automatic electricity billing and tripping for non paid customers
•Download as DOC, PDF•
0 likes•74 views
This project involves designing a prepaid electricity meter system using GSM technology. The system includes a digital energy meter to measure consumption, an LCD to display usage, and an EEPROM microcontroller to track consumption and amount owed. If payment is not made within 15 days, the system will trip the power supply and send an SMS notification. Power will be restored once payment is received.
Report
Share
Report
Share
Recommended
Automatic electricity billing and tripping for non
This project involves designing a prepaid electricity meter system using GSM technology. The system includes a digital energy meter to measure consumption, an LCD to display usage, and an EEPROM chip to store consumption data. If payment for consumed units is not made within 15 days, the microcontroller will send an SMS alert to the customer and trip the power supply relay to disconnect service until payment is made.
Smart Meter Reader
NorthQ has developed a small meter reader that can be installed on existing meters to visualize home electricity consumption. The meter reading solution consists of a meter reader, wireless transmitter, and USB receiver. Electricity usage data is sent to a PC every 15 minutes where it can be viewed in graphs to track consumption, CO2 emissions, and monitor appliance usage. It also allows setting a power budget and comparing consumption to previous years and other home types. The solution integrates with online portals to manage home energy use more efficiently and reduce environmental impact through lower CO2 emissions.
A smart prepaid energy metering system to control electricity theft
This document proposes a smart prepaid energy metering system to control electricity theft. The system uses bidirectional communication between a smart meter installed in each consumer unit and a central server using GSM modules. Consumers can recharge their meters remotely by SMSing a PIN from a scratch card. The system aims to reduce electricity theft by incorporating measures to prevent meter bypassing and tampering, which are ensured by the bidirectional SMS communication.
Smart meters
The document compares traditional electricity meters to smart meters. Traditional meters require manual reading by a meter reader, while smart meters automatically transmit usage data wirelessly. The document then lists benefits of smart grids such as more efficient transmission, lower costs, outage detection, and integration of renewable energy. It provides details on how smart meters and advanced metering infrastructure work and their advantages like accurate billing, reduced theft, and consumer energy monitoring. Potential challenges of smart meter implementation are also discussed such as upfront costs and data storage.
Net metering ppt
Net metering is a billing mechanism that credits solar energy system owners for excess electricity generated and added to the grid. It allows customers with solar panels or other renewable energy systems to get credit on their electricity bills for energy fed back to the grid. Through net metering, energy used from the grid is offset by energy produced, and any excess energy generated can be credited or rolled over to offset future energy costs. Net metering is legal in Pakistan under regulations established in 2015 to promote renewable energy and reduce electricity costs.
160712 newsletter
Utilities in the US have been deploying smart meters to implement energy efficiency programs and encourage sustainable energy use. A power company installed over 2 million smart meters across the US at a cost of $1 billion or about $29,000 per meter. They aimed to ensure accurate meter reading, enable remote reading, reduce theft and errors, and implement time-of-use pricing and energy savings programs. Customers pay monthly for smart meters but some resisted, so an opt-out fee was added to incentivize adoption. A demand response program notified customers of peak rates and times to reduce usage and costs.
Design of sensor modules of active & intelligent energy saving system
for btech, mtech, ece, eee , projecs on domains embedded, matlab, vlsi, image processing, signal processing, communication,fpga please contact @src embedded solution
web:www.srcembedded.com
mail:srcembedded@gmail.com
ph: 8297 313 858
Demand-Response in the Smart Grid Gotland project
A presentation I gave in Eindhoven, Netherlands about demand-response in the Smart Grid Gotland project. The presentation shows results from the wind power integration, market test and market installation subprojects. The subprojects are part of the Smart Grid Gotland project.
Recommended
Automatic electricity billing and tripping for non
This project involves designing a prepaid electricity meter system using GSM technology. The system includes a digital energy meter to measure consumption, an LCD to display usage, and an EEPROM chip to store consumption data. If payment for consumed units is not made within 15 days, the microcontroller will send an SMS alert to the customer and trip the power supply relay to disconnect service until payment is made.
Smart Meter Reader
NorthQ has developed a small meter reader that can be installed on existing meters to visualize home electricity consumption. The meter reading solution consists of a meter reader, wireless transmitter, and USB receiver. Electricity usage data is sent to a PC every 15 minutes where it can be viewed in graphs to track consumption, CO2 emissions, and monitor appliance usage. It also allows setting a power budget and comparing consumption to previous years and other home types. The solution integrates with online portals to manage home energy use more efficiently and reduce environmental impact through lower CO2 emissions.
A smart prepaid energy metering system to control electricity theft
This document proposes a smart prepaid energy metering system to control electricity theft. The system uses bidirectional communication between a smart meter installed in each consumer unit and a central server using GSM modules. Consumers can recharge their meters remotely by SMSing a PIN from a scratch card. The system aims to reduce electricity theft by incorporating measures to prevent meter bypassing and tampering, which are ensured by the bidirectional SMS communication.
Smart meters
The document compares traditional electricity meters to smart meters. Traditional meters require manual reading by a meter reader, while smart meters automatically transmit usage data wirelessly. The document then lists benefits of smart grids such as more efficient transmission, lower costs, outage detection, and integration of renewable energy. It provides details on how smart meters and advanced metering infrastructure work and their advantages like accurate billing, reduced theft, and consumer energy monitoring. Potential challenges of smart meter implementation are also discussed such as upfront costs and data storage.
Net metering ppt
Net metering is a billing mechanism that credits solar energy system owners for excess electricity generated and added to the grid. It allows customers with solar panels or other renewable energy systems to get credit on their electricity bills for energy fed back to the grid. Through net metering, energy used from the grid is offset by energy produced, and any excess energy generated can be credited or rolled over to offset future energy costs. Net metering is legal in Pakistan under regulations established in 2015 to promote renewable energy and reduce electricity costs.
160712 newsletter
Utilities in the US have been deploying smart meters to implement energy efficiency programs and encourage sustainable energy use. A power company installed over 2 million smart meters across the US at a cost of $1 billion or about $29,000 per meter. They aimed to ensure accurate meter reading, enable remote reading, reduce theft and errors, and implement time-of-use pricing and energy savings programs. Customers pay monthly for smart meters but some resisted, so an opt-out fee was added to incentivize adoption. A demand response program notified customers of peak rates and times to reduce usage and costs.
Design of sensor modules of active & intelligent energy saving system
for btech, mtech, ece, eee , projecs on domains embedded, matlab, vlsi, image processing, signal processing, communication,fpga please contact @src embedded solution
web:www.srcembedded.com
mail:srcembedded@gmail.com
ph: 8297 313 858
Demand-Response in the Smart Grid Gotland project
A presentation I gave in Eindhoven, Netherlands about demand-response in the Smart Grid Gotland project. The presentation shows results from the wind power integration, market test and market installation subprojects. The subprojects are part of the Smart Grid Gotland project.
Maxthon
Maxthon es un navegador web para Windows que inicialmente se basó en el motor de renderizado de Internet Explorer pero a partir de la versión 3 utiliza el motor WebKit. Fue creado en el 2000 por Jeff Chen para mejorar Internet Explorer 5 con más funciones y opciones de personalización. Maxthon usa preferentemente WebKit pero también incluye Trident para mostrar correctamente páginas antiguas, y ha obtenido altas puntuaciones en tests de cumplimiento de estándares.
Las migrañas con aura pueden aumentar el riesgo de problemas cardiacos
Las migrañas con aura pueden aumentar el riesgo de problemas cardiovasculares como ataques al corazón y accidentes cerebrovasculares. Un estudio encontró que la migraña con aura es el segundo factor de riesgo más importante para estas afecciones después de la hipertensión. Las mujeres que toman anticonceptivos hormonales y sufren de migrañas con aura también tienen un mayor riesgo de desarrollar coágulos sanguíneos.
Forinvest 2011 -Carlos Lluch
El documento presenta al pequeño mediador de seguros la realidad de las IT : son herramientas accesibles y necesarias.
Prospect Park West Rightsizing
Prospect Park West in Brooklyn was redesigned to reduce its 3 lanes of traffic down to 2 lanes, with the addition of a protected bike lane separated from traffic by parking. This was done to improve safety for pedestrians and bicyclists accessing nearby Prospect Park by slowing vehicle speeds, as the previous design had resulted in injuries. Though controversial initially, measurements after the redesign showed improved safety, increased bicycling, and maintained vehicle traffic flow.
Chymotrypsin poster
1. Chymotrypsin is a serine protease found in the pancreas that digests proteins through hydrolysis using a catalytic triad of Asp-102, His-57, and Ser-195.
2. It has a primary specificity for large aromatic amino acids due to its S1 pocket, and its activity is regulated by being initially synthesized as the inactive zymogen chymotrypsinogen.
3. Chymotrypsin's catalytic mechanism involves acylation and deacylation steps utilizing its catalytic triad and oxyanion hole to stabilize intermediates and transition states during peptide bond cleavage.
Apresentação De Slides Feito Pela Professora Silvana , Dia 22 De Maio De 2009
O documento encoraja o leitor a ter um bom dia, relaxar e apreciar as coisas simples da vida. Também sugere que devemos aceitar nossas limitações e viver com dignidade, permitindo-nos brilhar e ser felizes.
15 domingoto ciclob
El documento resume tres pasajes bíblicos sobre profetas enviados por Dios a anunciar su mensaje. Amós, un pastor, fue empujado por Dios a hablar a su pueblo a pesar de la oposición de las autoridades. Jesús envió a sus discípulos a predicar, echar demonios y curar, aunque su mensaje no siempre fue bien recibido. Los profetas y discípulos deben transmitir fielmente la palabra de Dios a pesar del rechazo.
03 generation alpha-jeanaxeldekemmeter
How can we merge the passions? This was one of the keynote selected during the Systemic Economy Summit 2015.
Boe a-2015-3031
El nuevo Real Decreto Ley 4/2015, de 22 de marzo, para la reforma urgente del Sistema de Formación Profesional para el Empleo en el ámbito laboral
Wk 1 32b
Exposure to UV light from the sun provides benefits like vitamin D production but can also damage skin by increasing risk of malignant melanoma and causing premature aging effects like wrinkles and age spots. UV light is important for vitamin D production but prolonged and repeated exposure increases risks of skin cancer and accelerated skin aging. A balance of some sun exposure with protection measures is recommended for optimal health effects.
Boletin contribuyendo con el cambio 19
El documento habla sobre el Instituto Nacional Materno Perinatal (INPPARES) y su trabajo en Iquitos. Muestra a una doctora y una recién nacida en la sala de partos de INPPARES Iquitos. Proporciona la dirección de correo electrónico y sitio web de INPPARES para obtener más información.
Intuitive Openings
This document provides a brief history of openings and closures from the 1800s to present day, highlighting key innovations over time. It discusses trends in demographics showing an aging population and buying power of older consumers. Finally, it covers design considerations for intuitive openings that account for physical changes with age as well as behavioral and environmental factors.
MONTHLY ELECTRICITY BILLING WITH BILL SMS USING PIC.pptx
The project provides a system that allows for consumed electricity reading in unit and How much amount of Current Can be Consumed by User its Prevent the Electricity Theft.
Our system provides the electricity readings on an LCD screen as well as can SMS this reading and cost to the user.
This lets the user know about his exact electricity units consumed and cost directly from his meter so that there is no chance of bill tampering.
The project allows a two way reading. One on LCD display and the second on SMS. Our project consists of IOT connected to a ATMEGA328p is an family of PIC. The system continuously monitors electrical pulses and calculates the unit consumption.
Smart energy meter (Updated)
This document describes a smart energy meter that uses a GSM module to send electricity consumption data via SMS. The meter uses an AD7751 IC to measure real power consumption based on current and voltage inputs. An AVR microcontroller then processes this data and calculates energy used. It can send meter readings, billing information, and load details to the user's mobile phone upon request via a missed call to provide real-time monitoring. The smart meter allows for accurate and automated energy monitoring and billing compared to traditional meters.
IRJET - Electricity Energy Meter using IoT
This document describes an IoT-based electricity energy meter that uses an ESP8266 Wi-Fi module. The energy meter can not only send SMS/email notifications of electricity bills but also allow users to monitor power usage anytime from anywhere using a mobile application. The energy meter provides bill amount notifications after each month and a website for users to pay their bills. If payment is delayed beyond a set time, power will automatically be shut off.
Energy merter
This document describes a project to design a prepaid energy meter system using a microcontroller. The system uses a smart card to store the amount of prepaid units. When a card is inserted, the reader deducts units based on power consumption. An alarm sounds when units are low and power is cut off when units reach zero to prevent theft. The system aims to improve revenue collection for utilities by requiring upfront payment and automating disconnection when credit is used. It provides benefits like reduced costs, better customer service and financial risk management for both customers and suppliers.
GSM Besed prepaid energy meter
Its work like a cell phone recharge phone if recharge is over electricity gone after that we need to recharge acount main benift is that we can oprate it from any where to the world
A Generalized Multistage Economic Planning Model for Distribution System Cont...
This document describes a smart energy meter system that allows for wireless billing and load management. The system consists of an energy meter installed at a customer's location that measures electricity usage and transmits readings wirelessly. A billing station then receives the data, calculates customer bills, and sends bills via text message. The meter can also send warning texts and disconnect power if usage exceeds limits. The system aims to reduce energy waste, provide more convenient billing, and allow remote disconnection for non-payment. It was found to be technically, economically, and commercially feasible to automate billing and load management using wireless communication compared to traditional manual processes.
IRJET- Smart Prepaid Energy Meter using GSM Technology
This document describes a smart prepaid energy meter system that uses GSM technology. The system aims to minimize queues at electricity billing counters, restrict usage when bills are unpaid, and reduce power theft. It uses a prepaid concept where consumers must reload credit before using electricity. The meter tracks consumption in real-time and cuts off power when credit is exhausted. Consumers receive SMS alerts on balance and consumption. Payment is done by entering a voucher code into the meter via keypad or SMS. The system aims to improve energy management, conservation and billing accuracy. It uses a microcontroller, GSM modem, energy meter and LCD display.
More Related Content
Viewers also liked
Maxthon
Maxthon es un navegador web para Windows que inicialmente se basó en el motor de renderizado de Internet Explorer pero a partir de la versión 3 utiliza el motor WebKit. Fue creado en el 2000 por Jeff Chen para mejorar Internet Explorer 5 con más funciones y opciones de personalización. Maxthon usa preferentemente WebKit pero también incluye Trident para mostrar correctamente páginas antiguas, y ha obtenido altas puntuaciones en tests de cumplimiento de estándares.
Las migrañas con aura pueden aumentar el riesgo de problemas cardiacos
Las migrañas con aura pueden aumentar el riesgo de problemas cardiovasculares como ataques al corazón y accidentes cerebrovasculares. Un estudio encontró que la migraña con aura es el segundo factor de riesgo más importante para estas afecciones después de la hipertensión. Las mujeres que toman anticonceptivos hormonales y sufren de migrañas con aura también tienen un mayor riesgo de desarrollar coágulos sanguíneos.
Forinvest 2011 -Carlos Lluch
El documento presenta al pequeño mediador de seguros la realidad de las IT : son herramientas accesibles y necesarias.
Prospect Park West Rightsizing
Prospect Park West in Brooklyn was redesigned to reduce its 3 lanes of traffic down to 2 lanes, with the addition of a protected bike lane separated from traffic by parking. This was done to improve safety for pedestrians and bicyclists accessing nearby Prospect Park by slowing vehicle speeds, as the previous design had resulted in injuries. Though controversial initially, measurements after the redesign showed improved safety, increased bicycling, and maintained vehicle traffic flow.
Chymotrypsin poster
1. Chymotrypsin is a serine protease found in the pancreas that digests proteins through hydrolysis using a catalytic triad of Asp-102, His-57, and Ser-195.
2. It has a primary specificity for large aromatic amino acids due to its S1 pocket, and its activity is regulated by being initially synthesized as the inactive zymogen chymotrypsinogen.
3. Chymotrypsin's catalytic mechanism involves acylation and deacylation steps utilizing its catalytic triad and oxyanion hole to stabilize intermediates and transition states during peptide bond cleavage.
Apresentação De Slides Feito Pela Professora Silvana , Dia 22 De Maio De 2009
O documento encoraja o leitor a ter um bom dia, relaxar e apreciar as coisas simples da vida. Também sugere que devemos aceitar nossas limitações e viver com dignidade, permitindo-nos brilhar e ser felizes.
15 domingoto ciclob
El documento resume tres pasajes bíblicos sobre profetas enviados por Dios a anunciar su mensaje. Amós, un pastor, fue empujado por Dios a hablar a su pueblo a pesar de la oposición de las autoridades. Jesús envió a sus discípulos a predicar, echar demonios y curar, aunque su mensaje no siempre fue bien recibido. Los profetas y discípulos deben transmitir fielmente la palabra de Dios a pesar del rechazo.
03 generation alpha-jeanaxeldekemmeter
How can we merge the passions? This was one of the keynote selected during the Systemic Economy Summit 2015.
Boe a-2015-3031
El nuevo Real Decreto Ley 4/2015, de 22 de marzo, para la reforma urgente del Sistema de Formación Profesional para el Empleo en el ámbito laboral
Wk 1 32b
Exposure to UV light from the sun provides benefits like vitamin D production but can also damage skin by increasing risk of malignant melanoma and causing premature aging effects like wrinkles and age spots. UV light is important for vitamin D production but prolonged and repeated exposure increases risks of skin cancer and accelerated skin aging. A balance of some sun exposure with protection measures is recommended for optimal health effects.
Boletin contribuyendo con el cambio 19
El documento habla sobre el Instituto Nacional Materno Perinatal (INPPARES) y su trabajo en Iquitos. Muestra a una doctora y una recién nacida en la sala de partos de INPPARES Iquitos. Proporciona la dirección de correo electrónico y sitio web de INPPARES para obtener más información.
Intuitive Openings
This document provides a brief history of openings and closures from the 1800s to present day, highlighting key innovations over time. It discusses trends in demographics showing an aging population and buying power of older consumers. Finally, it covers design considerations for intuitive openings that account for physical changes with age as well as behavioral and environmental factors.
Viewers also liked (15)
Las migrañas con aura pueden aumentar el riesgo de problemas cardiacos
Las migrañas con aura pueden aumentar el riesgo de problemas cardiacos
Apresentação De Slides Feito Pela Professora Silvana , Dia 22 De Maio De 2009
Apresentação De Slides Feito Pela Professora Silvana , Dia 22 De Maio De 2009
Similar to Automatic electricity billing and tripping for non paid customers
MONTHLY ELECTRICITY BILLING WITH BILL SMS USING PIC.pptx
The project provides a system that allows for consumed electricity reading in unit and How much amount of Current Can be Consumed by User its Prevent the Electricity Theft.
Our system provides the electricity readings on an LCD screen as well as can SMS this reading and cost to the user.
This lets the user know about his exact electricity units consumed and cost directly from his meter so that there is no chance of bill tampering.
The project allows a two way reading. One on LCD display and the second on SMS. Our project consists of IOT connected to a ATMEGA328p is an family of PIC. The system continuously monitors electrical pulses and calculates the unit consumption.
Smart energy meter (Updated)
This document describes a smart energy meter that uses a GSM module to send electricity consumption data via SMS. The meter uses an AD7751 IC to measure real power consumption based on current and voltage inputs. An AVR microcontroller then processes this data and calculates energy used. It can send meter readings, billing information, and load details to the user's mobile phone upon request via a missed call to provide real-time monitoring. The smart meter allows for accurate and automated energy monitoring and billing compared to traditional meters.
IRJET - Electricity Energy Meter using IoT
This document describes an IoT-based electricity energy meter that uses an ESP8266 Wi-Fi module. The energy meter can not only send SMS/email notifications of electricity bills but also allow users to monitor power usage anytime from anywhere using a mobile application. The energy meter provides bill amount notifications after each month and a website for users to pay their bills. If payment is delayed beyond a set time, power will automatically be shut off.
Energy merter
This document describes a project to design a prepaid energy meter system using a microcontroller. The system uses a smart card to store the amount of prepaid units. When a card is inserted, the reader deducts units based on power consumption. An alarm sounds when units are low and power is cut off when units reach zero to prevent theft. The system aims to improve revenue collection for utilities by requiring upfront payment and automating disconnection when credit is used. It provides benefits like reduced costs, better customer service and financial risk management for both customers and suppliers.
GSM Besed prepaid energy meter
Its work like a cell phone recharge phone if recharge is over electricity gone after that we need to recharge acount main benift is that we can oprate it from any where to the world
A Generalized Multistage Economic Planning Model for Distribution System Cont...
This document describes a smart energy meter system that allows for wireless billing and load management. The system consists of an energy meter installed at a customer's location that measures electricity usage and transmits readings wirelessly. A billing station then receives the data, calculates customer bills, and sends bills via text message. The meter can also send warning texts and disconnect power if usage exceeds limits. The system aims to reduce energy waste, provide more convenient billing, and allow remote disconnection for non-payment. It was found to be technically, economically, and commercially feasible to automate billing and load management using wireless communication compared to traditional manual processes.
IRJET- Smart Prepaid Energy Meter using GSM Technology
This document describes a smart prepaid energy meter system that uses GSM technology. The system aims to minimize queues at electricity billing counters, restrict usage when bills are unpaid, and reduce power theft. It uses a prepaid concept where consumers must reload credit before using electricity. The meter tracks consumption in real-time and cuts off power when credit is exhausted. Consumers receive SMS alerts on balance and consumption. Payment is done by entering a voucher code into the meter via keypad or SMS. The system aims to improve energy management, conservation and billing accuracy. It uses a microcontroller, GSM modem, energy meter and LCD display.
Prepaid Energy Meter using GSM Module
The aim of the project is to minimize the queue at the energy meter billing counters and to restrict the usage of energy meter automatically, if the bill is not paid. The project also aims at proposing a system that will reduce the loss of power and revenue due to power thefts and other illegal activities. The work system adopts a totally new concept of “Prepaid Energy Meter”. The GSM technology is used so that the consumer would receive messages about the consumption of power (in watts) and if it reaches the minimum amount, it would automatically alert the consumer to recharge. This technology holds good for all electricity distribution companies, private communities, IT parks and self-containing housing projects. The implementation of this project will help in better energy management, conservation of energy and also in doing away with the unnecessary hassles over incorrect billing. The automated billing system will keep track of the real time consumption and will leave little scope for disagreement on consumption and billing.It is observed that one of the faulty subsystems contributing to the huge revenue loss in Nigerian Power Sector is the metering and billing system. Errors get introduced at every stage of energy billing, like: errors with electro-mechanical meters, human errors while noting down the meter reading; and error while processing the paid bills and the due bills. The remedy for this drawback is a prepaid energy billing. There are clear results from many countries, where prepaid system has reduced the revenue loss by a large amount. A GSM-based Energy Recharge Interface which contains a prepaid card equivalent to a mobile SIM card. The prepaid card communicates with the power utility using GSM communication network. Once the prepaid card is out of balance, the consumer load is disconnected from the utility supply by the latching Relay (contactor). The power utility can recharge the prepaid card remotely through GSM/SMS mode base on customer requests. The results obtained shows good system performance. A prior billing is bound to do away with the problems of unpaid bills and human error in meter readings, thereby ensuring justified revenue for the utility
Prepaid Energy Meter using GSM Module
The aim of the project is to minimize the queue at the energy meter billing counters and to restrict the usage of energy meter automatically, if the bill is not paid. The project also aims at proposing a system that will reduce the loss of power and revenue due to power thefts and other illegal activities. The work system adopts a totally new concept of “Prepaid Energy Meter”. The GSM technology is used so that the consumer would receive messages about the consumption of power (in watts) and if it reaches the minimum amount, it would automatically alert the consumer to recharge. This technology holds good for all electricity distribution companies, private communities, IT parks and self-containing housing projects. The implementation of this project will help in better energy management, conservation of energy and also in doing away with the unnecessary hassles over incorrect billing. The automated billing system will keep track of the real time consumption and will leave little scope for disagreement on consumption and billing.It is observed that one of the faulty subsystems contributing to the huge revenue loss in Nigerian Power Sector is the metering and billing system. Errors get introduced at every stage of energy billing, like: errors with electro-mechanical meters, human errors while noting down the meter reading; and error while processing the paid bills and the due bills. The remedy for this drawback is a prepaid energy billing. There are clear results from many countries, where prepaid system has reduced the revenue loss by a large amount. A GSM-based Energy Recharge Interface which contains a prepaid card equivalent to a mobile SIM card. The prepaid card communicates with the power utility using GSM communication network. Once the prepaid card is out of balance, the consumer load is disconnected from the utility supply by the latching Relay (contactor). The power utility can recharge the prepaid card remotely through GSM/SMS mode base on customer requests. The results obtained shows good system performance. A prior billing is bound to do away with the problems of unpaid bills and human error in meter readings, thereby ensuring justified revenue for the utility.
Repot on gsm based arm
This document provides an overview and introduction to a proposed smart and intelligent GSM-based automatic meter reading and control system. It discusses the background of GSM networks and their adoption worldwide. It then describes an automatic meter reading system that can collect meter readings without site visits using technologies like GSM, and outlines the advantages this system provides over conventional methods. Finally, it presents the proposed system architecture and methodology for implementing a GSM-based automatic meter reading and control system.
Prepaid energymeter
1. The document discusses prepaid energy meters as an alternative to traditional electricity billing systems. Prepaid energy meters allow customers to pay for a set amount of electricity units in advance before using them.
2. Traditional billing systems are time-consuming and error-prone, involving manual meter readings, bill production, and payment collection. Prepaid energy meters address these issues by automating the process.
3. Key advantages of prepaid energy meters include accuracy, reducing debt and electricity theft, enabling customers to better budget their electricity usage, and allowing suppliers to better monitor consumption and demand.
IRJET- IoT based Prepaid Energy Meter
This document describes an IOT-based prepaid energy meter system that uses GSM technology for remote monitoring and recharging. The system consists of an energy meter connected to a microcontroller that measures power consumption and sends readings to a central server via GPRS. When consumption reaches a minimum amount, an alert SMS is sent to the user. The system allows users to view readings through a mobile app and reduces manual reading collection. It provides awareness of home electricity usage and could help companies monitor and reduce power waste.
prepaid energymeter
Prepaid energy meters allow customers to pay for electricity before using it, similar to prepaid mobile phones. With traditional energy meters, a person had to read meters and deliver bills each month, which was time-consuming and error-prone. Prepaid meters address these issues by automatically cutting off power when credit is exhausted, eliminating billing delays and disputes. The prepaid system uses smart cards or tokens to recharge the meter remotely via a microcontroller, LCD display, GSM modem and relays. This makes the process more convenient and efficient compared to traditional billing methods.
Eigg mod23.1
The project aims to automatically monitor energy meter readings and electricity costs, notify users of impending power cuts, and detect electricity theft using a GSM modem and Zigbee system. The system uses a PIC microcontroller connected to the energy meter and load to count readings detected by an IR receiver. Readings are transmitted to the electricity board via Zigbee and the board sends usage details and payment due dates to users through GSM. If unpaid, the board sends a disconnection command via Zigbee to disconnect the relay and shut off power, notifying the user.
Digital energy meter
This document describes the design of a digital energy meter with a cost indicator. It has three main parts: a power sensing unit, a power and cost calculation unit, and a display unit using LCD. It measures power consumption and calculates the energy used in kW/h and the corresponding cost based on the tariff rates stored in the microcontroller. The values are displayed on the LCD. It is designed using components like a PIC microcontroller, current and potential transformers, and an LCD for display. The circuit uses a power supply unit consisting of a step-down transformer, rectifier, filters and regulators to provide the necessary power.
Prepaid energy meter using gprs gsm technology
This document has been prepared related to a project of designing and implementing a single phase 230V 40A digital prepaid energy meter according to IEC standards.
Prepaid energy meter using gprs gsm technology
This document has been prepared related to a project of designing and implementing a single phase 230V 40A digital prepaid energy meter according to IEC standards.
Prakash_Seminar (electricity billing system)
The document discusses electricity billing systems, including traditional and prepaid metering systems.
Traditional systems involve manual meter reading, billing, and payment collection processes which are time-consuming and error-prone. Prepaid metering allows customers to pay for electricity before using it, like recharging a mobile phone. This addresses issues with traditional systems by automating processes, reducing costs and errors, and giving customers more control over their usage.
The document then describes how a prepaid electricity meter works, using a microcontroller, LCD display, GSM modem, and relays to connect or disconnect power based on the balance remaining after deducting units as they are consumed. Prepaid metering provides benefits but also has
Talking energy meter based on microcontroller ppt
The project “Design a Talking Energy Meter based on Microcontroller” is design such that whenever the usage of energy exceeds the threshold value which is set by user, it announces an alert message which was already predefined in the voice circuit. The SMS of monthly billing status is also sends on user’s mobile number which is mentioned in program.
Intelligent Power Meter using GSM network and Android Application
Now a days everything is being automated. The electrical energy provider still uses traditional methods for reading the energy consumed by individual consumer. The proposed system automatically reads the energy consumed and send it to the electricity provider using the short messaging services (SMS) and Android app.
Similar to Automatic electricity billing and tripping for non paid customers (20)
MONTHLY ELECTRICITY BILLING WITH BILL SMS USING PIC.pptx
MONTHLY ELECTRICITY BILLING WITH BILL SMS USING PIC.pptx
A Generalized Multistage Economic Planning Model for Distribution System Cont...
A Generalized Multistage Economic Planning Model for Distribution System Cont...
IRJET- Smart Prepaid Energy Meter using GSM Technology
IRJET- Smart Prepaid Energy Meter using GSM Technology
Intelligent Power Meter using GSM network and Android Application
Intelligent Power Meter using GSM network and Android Application
More from Ecway2004
Covering points of interest with mobile sensors
Ecway Technologies provides IEEE projects and software developments from its offices located in multiple cities across Tamil Nadu, India. The company's website and contact information is provided.
The document discusses an algorithm for optimizing the autonomous deployment of mobile sensors to cover predefined Points of Interest while maintaining connectivity between the sensors and a base station. Each sensor moves toward a Point of Interest but also maintains connectivity with a subset of neighboring sensors that are part of a Relative Neighborhood Graph, which is reduced to provide global connectivity locally. The deployment scheme aims to minimize connectivity sensors and maximize monitoring sensors. Analytical results, simulations, and a practical implementation demonstrate the efficiency of the algorithm.
Coloring based inter-wban scheduling for mobile wireless body area networks
This document describes a study on inter-WBAN scheduling for mobile wireless body area networks. The study proposes a random incomplete coloring algorithm with low time complexity and high spatial reuse to overcome interference between wireless body area networks. Simulation results show that the proposed coloring algorithm effectively overcomes inter-WBAN interference and supports higher system throughput in various mobile WBAN scenarios compared to conventional coloring methods.
Code modulation based encryption & decryption technique for secure communicat...
This document describes a code modulation based encryption and decryption technique for secure wireless communication. The system has a transmitter section and receiver section, each designed around a microcontroller. At the transmitter, data typed into a PC is encrypted using the microcontroller and transmitted via RF. At the receiver, the encrypted data is received, decoded by the microcontroller, and displayed on the PC. To view the actual data, a password must be entered which decrypts the cipher text into plaintext. The block diagram shows the transmitter components include an encoder, microcontroller, MAX232, and RF transmitter. The receiver components include a decoder, microcontroller, MAX232, and RF receiver.
Clustering sentence level text using a novel fuzzy relational clustering algo...
Ecway Technologies is a software development company with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The paper presents a novel fuzzy clustering algorithm that operates on relational input data in the form of a pairwise similarity matrix between objects. The algorithm uses a graph representation and models centrality as likelihood in an Expectation-Maximization framework. Results show the algorithm can identify overlapping clusters of semantically related sentences, demonstrating potential use in text mining tasks. It was also applied successfully to benchmark datasets in other domains.
Clustering large probabilistic graphs
This document summarizes a study on clustering probabilistic graphs. It proposes extending the edit-distance-based definition of graph clustering to probabilistic graphs. Practical approximation algorithms are developed based on establishing a connection between the objective function and correlation clustering. The parameter-free objective function means the number of clusters is part of the output. Methods are developed for testing statistical significance of clusters and handling noisy clusterings. Experiments on real protein-protein interaction and large-scale social networks demonstrate the techniques can discover correct numbers of clusters and identify known relationships.
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
This paper presents a smart driving direction system that leverages taxi drivers' intelligence and experience. GPS-equipped taxis act as mobile sensors to model the dynamic traffic patterns of a city. A time-dependent landmark graph models traffic patterns and experienced drivers' route choices to provide users with the practically fastest route to a destination at a given departure time. A clustering approach estimates travel times between landmarks in different time slots. A two-stage routing algorithm then computes a customized, practically fastest route for the user based on this graph and real-world trajectory data from over 33,000 taxis over three months. Evaluation found that 60-70% of routes suggested were faster than alternatives, with 20% sharing results, and on average routes
Cloudsim ranking on data manifold with sink points
ECWAY Technologies provides IEEE projects and software development services from its offices in multiple cities across India. The document discusses a novel ranking approach called Manifold Ranking with Sink Points (MRSP) that addresses diversity, relevance, and importance in ranking. MRSP uses manifold ranking over a data manifold to find the most relevant objects while turning already ranked objects into "sink points" to prevent redundant objects from receiving a high rank. Experimental results on update summarization and query recommendation tasks show MRSP performs strongly compared to existing ranking approaches by better addressing the importance of diversity in ranking.
Cloudsim quality-differentiated video multicast in multirate wireless networks
This document describes a quality-differentiated video multicast scheme for multirate wireless networks called QDM. QDM aims to provide heterogeneous clients with differentiated video qualities matching their channel conditions. It first proposes a rate scheduling model to select the optimal transmission bitrate for each video frame to maximize total visual quality subject to minimum quality guarantees. It then presents QDM, a practical protocol that constructs a cluster-based structure to characterize heterogeneity and adapts transmission rates based on video quality perceived by cluster heads. Simulation results show QDM can efficiently adapt to network dynamics and variable bitrates, producing a 2-5 dB gain in average video quality over leader-based approaches.
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
The document proposes a power allocation scheme for statistical quality-of-service provisioning in multi-relay cognitive networks. The scheme first chooses between direct transmission or relay transmission based on channel state information. It then performs efficient power allocation according to the transmission mode and given constraints like quality-of-service requirements, average transmit power limits, and peak interference limits. Simulations show the proposed scheme outperforms max-min criterion and equal power allocation policies by achieving higher throughput while involving at most two relays for transmission.
Cloudsim distributed web systems performance forecasting using turning bands...
The document discusses using the Turning Bands method to forecast the performance of distributed web systems. Real-life data was obtained from an experiment monitoring a group of web servers worldwide using an agent system called MWING located in different parts of Poland. The results showed good quality in predicting web performance when European web servers were monitored from an agent in Gliwice, Poland using the Turning Bands method.
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
This document summarizes a paper on distributed processing of probabilistic top-k queries in wireless sensor networks. It introduces the concepts of sufficient and necessary sets, which can facilitate localized data pruning in clusters. It then describes three algorithms - sufficient set-based, necessary set-based, and boundary-based - for intercluster query processing with bounded communication rounds. Finally, it presents an adaptive algorithm that dynamically switches between the three algorithms to minimize transmission cost, and experimental results showing the algorithms significantly reduce data transmission with small constant communication rounds, with the adaptive algorithm performing near-optimally under various conditions.
Civil 2013 titles
This document contains 15 titles for civil engineering projects related to structural analysis. The titles cover topics like analyzing beams, trusses, bridges, dams, and other structures under different loads and conditions using methods like finite element analysis. The analyses will determine factors like deflection, stresses, stability, and performance of the various civil structures.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. A chopper circuit allows controlling the voltage to the motor by rapidly switching the voltage on and off, which enables remote speed control. This method improves motor efficiency by reducing current, lowers temperatures, shrinks motor size, and increases lifetime compared to previous variable resistor and transformer-based speed control methods. The project will use buttons to vary the firing angle of a MOSFET in the chopper circuit to control motor speed, with lower firing angles providing higher speeds.
Channel assignment for throughput optimization in multichannel multiradio wir...
ECWAY Technologies provides IEEE projects and software developments with offices in multiple cities in Tamil Nadu, India. They can be contacted via phone or email.
The document discusses a channel assignment algorithm for throughput optimization in multi-radio wireless mesh networks using network coding. It formulates the joint problem of random network coding, channel assignment, and broadcast link scheduling while taking into account opportunistic overhearing, interference constraints, coding constraints, number of channels, radios per node, and fairness between unicast connections. An auction-based suboptimal solution is developed for overall network throughput optimization. Performance evaluation shows the algorithm can effectively use multiple radios and channels while addressing fairness issues from the auction, with promising gains over traditional routing
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
The document proposes a hybrid channel allocation and routing approach for multichannel multiradio wireless mesh networks. It presents an Adaptive Dynamic Channel Allocation (ADCA) protocol that considers both throughput and delay for channel assignment. It also proposes an Interference and Congestion Aware Routing (ICAR) protocol for hybrid networks with static and dynamic links that balances channel usage. Simulation results show ADCA reduces packet delay without degrading throughput, and the hybrid approach adapts better to changing traffic than static-only networks with lower overhead and delay than existing hybrid methods.
Casual stereoscopic photo authoring
Ecway Technologies provides software development and IEEE projects services from offices located in multiple cities across India. They can be contacted via phone or email on their website at www.ecwayprojects.com.
The paper presents a method for easy stereoscopic photo authoring using a regular monocular camera. It takes two input images or video frames and transforms them into a stereoscopic image pair for pleasant 3D viewing. This is done through a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. The warping uses spatially-varying mesh-based warps that encode various constraints to best meet the stereoscopic geometry and minimize distortion. Experiments show the
Casual stereoscopic photo authoring
Ecway Technologies provides IEEE projects, software developments, and casual stereoscopic photo authoring. It has offices in multiple cities across India. Ecway's casual stereoscopic photo authoring method takes two images or video frames from a regular monocular camera as input and transforms them into a stereoscopic image pair for 3D viewing. The method uses a perceptual-plausible image rectification algorithm that warps the input pairs to meet stereoscopic geometric constraints while avoiding visual distortion. It formulates the warping problem as a quadratic energy minimization solved using a sparse linear solver. The method also allows local and global disparity adjustments for adapting stereoscopic images to different viewing conditions. Experiments show Ecway's spatially-varying war
Capacity of hybrid wireless mesh networks with random a ps
This paper proposes a hybrid wireless mesh network (WMN) architecture that allows the backbone to utilize random connections to access points (APs) in a wireless local area network (WLAN). Theoretical analysis shows that the capacity of a three-tier hybrid WMN is affected by the number of mesh router cells connected to APs, the ratio of access link bandwidth to backbone link bandwidth, and traffic balance among routers with AP access. Simulation results demonstrate that configuring APs and balancing traffic can significantly improve network capacity in the proposed hybrid architecture by taking advantage of wired connections through APs.
Bomb detection robot with wireless camera
This prototype robot is designed to help bomb squads by remotely detecting bombs and obstacles. It uses sensors to detect metals and obstacles as it moves through an area, sending that information back to operators via a wireless camera and computer. The robot is navigated and directed remotely using the camera while its metal detection, obstacle detection, and location data are sent to a base station for operators to monitor on LED displays and sounds.
Bed side patients monitoring system with emergency alert
The document describes a bedside patient monitoring system that measures temperature data using a portable medical monitoring unit. The unit contains a microcontroller, sensor board, and processing system to manage information, analyze data in real-time, and provide warnings for emergencies or abnormal diagnoses. The system takes a patient's temperature, converts it to digital using an ADC, and sends it to the microcontroller for processing. If the temperature exceeds a threshold, the system sounds a buzzer for notification.
More from Ecway2004 (20)
Coloring based inter-wban scheduling for mobile wireless body area networks
Coloring based inter-wban scheduling for mobile wireless body area networks
Code modulation based encryption & decryption technique for secure communicat...
Code modulation based encryption & decryption technique for secure communicat...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Clustering sentence level text using a novel fuzzy relational clustering algo...
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim t-drive enhancing driving directions with taxi drivers’ intelligence
Cloudsim ranking on data manifold with sink points
Cloudsim ranking on data manifold with sink points
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim quality-differentiated video multicast in multirate wireless networks
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim power allocation for statistical qo s provisioning in opportunistic...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed web systems performance forecasting using turning bands...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Cloudsim distributed processing of probabilistic top-k queries in wireless s...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel assignment for throughput optimization in multichannel multiradio wir...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Channel allocation and routing in hybrid multichannel multiradio wireless mes...
Capacity of hybrid wireless mesh networks with random a ps
Capacity of hybrid wireless mesh networks with random a ps
Bed side patients monitoring system with emergency alert
Bed side patients monitoring system with emergency alert
Automatic electricity billing and tripping for non paid customers
- 1. AUTOMATIC ELECTRICITY BILLING AND TRIPPING FOR NON-PAID CUSTOMERS ABSTRACT: The main objective of this project is to design a prepaid energy meter system with the help of GSM technology. For measuring energy consumed by the user we are going to use one digital energy meter, at the same time as it uses 1unit the count will be displayed in LCD. In this project we are using bulbs as a load. Up to end of month no of units consumed and total amount to be pay will update according to the power consumption and at the end of the month total amount will transferred to last month due Column. And if the customer not paid that money within the 15 days then we will trip the total power supply connected to load and we will give intimation to the customer through GSM SMS. We will provide the supply to customer when he pays the bill.