Autocad Drawing Sample 3
•
0 likes•100 views
GlassProfile is a company that manufactures custom glass products for residential and commercial buildings. They have over 30 years of experience crafting glass railings, windows, and doors. Their team of expert glassworkers and engineers can design functional yet beautiful glass elements to enhance any architectural space.
Report
Share
Report
Share
Download to read offline
Recommended
Autocad Drawing Sample 7
SpecialCam is a new type of camera that can take high-resolution photos in low-light conditions without using a flash. It has a large image sensor and advanced image processing software that allows it to capture light photons more effectively than traditional cameras. This new technology will enable photographers to take clearer pictures indoors and at night without disturbing others with a flash.
Floor Plan Sample 1
one-story house
w/:
-porch
-kitchen
-masters' bedroom
-3 bedroom
-utility room
-garage
-living room
-dinning room
-office/study room
Listening
*The Nature and Importance of Effective Listening
-The Nature of Listening
-Difference between Hearing and Listening
-The Significance of Listening
-The Process of Listening
*Diverse of Listening
-Types of Listening
-Barriers to Effective Listening
-Some Tips in Effective Listening
Front Elevation Sample 1
This single sentence document provides a scale drawing for a front elevation of 1:1 meters. It conveys essential information about the scale and subject of a technical drawing in only 5 words.
Autocad Drawing Sample 6
The rockerarm transmits motion from the camshaft to the intake and exhaust valves. It pivots on a shaft and has a roller or flat pad at each end that rides on the camshaft lobe and the tip of the valve stem. As the camshaft lobe rotates, it pushes up on the rockerarm which then pushes down on the valve stem to open the valve.
Autocad Drawing Sample 5
The gasket hand-wheel is a component used to seal openings on equipment. It consists of a hand wheel attached to a threaded stem that compresses a gasket material between flanges or surfaces to create a fluid-tight seal. Turning the hand-wheel in one direction compresses the gasket while turning it in the opposite direction releases the compression.
Recommended
Autocad Drawing Sample 7
SpecialCam is a new type of camera that can take high-resolution photos in low-light conditions without using a flash. It has a large image sensor and advanced image processing software that allows it to capture light photons more effectively than traditional cameras. This new technology will enable photographers to take clearer pictures indoors and at night without disturbing others with a flash.
Floor Plan Sample 1
one-story house
w/:
-porch
-kitchen
-masters' bedroom
-3 bedroom
-utility room
-garage
-living room
-dinning room
-office/study room
Listening
*The Nature and Importance of Effective Listening
-The Nature of Listening
-Difference between Hearing and Listening
-The Significance of Listening
-The Process of Listening
*Diverse of Listening
-Types of Listening
-Barriers to Effective Listening
-Some Tips in Effective Listening
Front Elevation Sample 1
This single sentence document provides a scale drawing for a front elevation of 1:1 meters. It conveys essential information about the scale and subject of a technical drawing in only 5 words.
Autocad Drawing Sample 6
The rockerarm transmits motion from the camshaft to the intake and exhaust valves. It pivots on a shaft and has a roller or flat pad at each end that rides on the camshaft lobe and the tip of the valve stem. As the camshaft lobe rotates, it pushes up on the rockerarm which then pushes down on the valve stem to open the valve.
Autocad Drawing Sample 5
The gasket hand-wheel is a component used to seal openings on equipment. It consists of a hand wheel attached to a threaded stem that compresses a gasket material between flanges or surfaces to create a fluid-tight seal. Turning the hand-wheel in one direction compresses the gasket while turning it in the opposite direction releases the compression.
Models of Communication
Models of Communication
• Aristotelian
• Lasswell
• Shannon-Weaver
• Schramm
• Berlo
• White
SUMMARRY:
MODELS FOCUS FEATURE
1. Aristotle Speaker, Message, listener One way process
2. Lasswell Speaker, Message, Receiver, channel, effect Linear and sequential
3. Shannon-Weaver Information, source, transmitter, receiver, destination, noise Linear , sequential
4. Schramm Communicators, messages, and field of experience Interactive, circular
5. Berlo Source, message, channel, and receiver Almost complete model but suggests linearity
6. White Eight stages: thinking, symbolizing, expressing, transmitting, receiving, decoding, feedback Cyclical and sequential relationship
Autocad Drawing Sample 1
This document provides specifications for drawing different line types including solid, hidden, centered, dashed, and divided lines with varying widths between 0.25mm and 0.40mm and a hidden, centered, or divided spacing of 0.13mm.
Site Development Plan 1
This site development plan shows a vegetable garden and a fruit garden separated by a road. The plan labels two areas as gardens on either side of a centrally located road.
Deontological Ethical Theory
Topic: DEONTOLOGICAL ETHICAL THEORY
Contents:
A. Historical Origin
Early beginning of human civilization
• The word of the king is the law
Deontological
Greek word “dein” or “deon” meaning “To be obligated” or simply “duty”
B.Kants’ Major Contribution to Deontological Theory
Immanuel Kant (1724-1804)
• Avid defender of deontological theory
• Contributed as many important and brilliant ideas to the philosophical study of ethics
C.The Good Will: The Core of Kant’s Ethics
Morality of an action lies on the inner motive rather than the external effects
Kants’ ethics primarily based on good will
Duty must be done out of pure reverence to the moral law
D.Duty over Inclination
“A person is only acting morally only when he suppresses his feelings and inclinations and does that which he is obliged to do”
Inclination
means doing the things that one’s feels like doing, and thus no obligation exists.
Example:
Helping your neighbor to fix her flat tire.
• Three possible reasons of helping:
1) Expectation of the reward-immoral
2) Pity-immoral
3) Duty-moral
1 is done out of desire to get a reward and 2 is done out of emotion thus, the acts are considered immoral. On the other hand, 3 is done out of obligation and this makes the act moral.
E.Duty is Superior to Happiness
“Our duties cannot consist simply in following rules that promote pleasure and avoidance of pain as the utilitarian’s claim, since that would make right actions depend upon consequences, on how well they satisfied our desires”
Example:
1) Lying
2) Breaking promise
The above examples are immoral actions not because it can create bad consequences but because these are wrong in itself.
F.The Categorical Imperative: The Universalizability Principle
“Act only according to that maxim by which you can at the same time will that it should become a universal law”
Maxim is a personal and subjective guiding principle
We must universalize our moral judgement
G.The Principle of Humanity (Respect for Persons)
Also known as ’Principle of Ends’
Concerns respect for the dignity of persons
Rational beings are ends in themselves
Do not treat others as means
H.Autonomy of The Will (Kingdom of Ends)
“For without personal autonomy, Morality becomes an impossibility”
Autonomous will
The will becomes autonomous when the genuinely moral actions are chosen:
• Freely
• Rationally
• By The Self (Autonomously)
Kingdom of ends
It is a moral universe of the moral beings in which:
• Respect for Intrinsic Worth
• Respect for Value of All Persons
is exercised by everyone.
Categorical Syllogism
ON CATEGORICAL SYLLOGISM
LEGEND
U - universal / P - particular
A - affirmative / N - negative
3 PROPOSITIONS
- MAJOR Premise (first premise)
- MINOR Premise (second premise)
- Conclusion
Rule in constructing the argument:
UUU / UPP / PUP
AAA / ANA / NAN
ON THE TERMS (3 terms)
MAJOR term
- the Predicate of the Conclusion and is found in the Major premise (subject or predicate)
MINOR term
- the Subject of the Conclusion and is found in the Minor premise (subject or predicate)
MIDDLE term
- found in the major and minor premises but not in the conclusion
ON FIGURE (CATEGORICAL SYLLOGISM)
FIGURE-refers to the arrangement of MIDDLE term in the two premises in the syllogism
CONT.
ON MOODS (CATEGORICAL SYLLOGISM)
MOODS refers to the pattern of the types of proposition used in the syllogism.
Morality of Human Acts
MORALITY OF HUMAN ACTS
Human Acts
Acts of Man
Basic Element of Human Acts
• Types of Voluntariness
Major Determinants of the Morality of Human Acts
Four Types of Circumstances
Specific Types of Circumstances
Modifiers of Human Acts
1) Ignorance
• Types of Ignorance
2) Passion
3) Fear
Act done ‘with’ fear
Act done ‘out’ of fear
4) Violence
5) Habit
Auto Cad 2013 Certificate Level 3
Carl Bass, President and CEO of Autodesk, has issued a certificate of completion to Armand Louw for successfully completing the 21-hour Autocad Advanced course taught by instructor Petrus Hendrik Kloppers at the Professional Drafting Services Autodesk Authorized Training Center. The course, completed on November 27, 2013, was designed by Autodesk to provide professionals with relevant AutoCAD skills and content from authorized instructors and materials.
Auto cad lt 2013 for pc
AutoCAD LT 2013 software allows users to capture design concepts, produce precise 2D technical drawings, and document ideas using comprehensive 2D drafting and detailing tools. It enables collaboration by allowing users to create DWG files and share work with colleagues and clients. AutoCAD LT 2013 aims to increase productivity with intuitive tools focused on efficient design documentation.
AutoCAD succinctly
AutoCAD is a Computer Aided Design and Drafting (CADD) software application, developed by Autodesk and used across a wide range of industries by architects, engineers, graphic designers, project managers, and in 3D modeling, just to mention a few.
Autodesk also develops vertical solutions, using AutoCAD as a base platform, including enhanced features for many different disciplines, and a light version called AutoCAD LT (or AutoCAD Light) which does not include 3D design capabilities and advanced customization and programming, while AutoCAD offers very powerful tools for 3D modeling and customization.
This book covers common AutoCAD 2016 features. Users running other AutoCAD vertical solutions or AutoCAD LT and some older releases of AutoCAD may use this book as a quick-start guide for working with the product.
Try my comprehensive quiz to assess your knowledge at: http://www.proprofs.com/quiz-school/story.php?title=NzIyMzUz5920&setprice=NzIyMDgy
Celina’S Presentation Autocad
AutoCAD is a CAD software initially released in 1982 as one of the first CAD programs usable on personal computers rather than mainframe computers. It uses basic entities like lines and circles to create complex objects and supports customization through APIs. Over time, AutoCAD has added increased 3D modeling, rendering, and solid modeling capabilities to enable unique 2D and 3D designs for applications such as human factors assessments.
Eduction
Types of Eduction:
a. conversion
1. simple conversion
2. partial conversion
b. obversion
c. contraposition
1. simple contraposition
2. complete contraposition
d. inversion
1. simple inversion
2. complete inversion
Application of programming languages in civil engineering
This document provides an overview of various computer applications used in civil engineering. It discusses 2D and 3D drafting programs like QCAD, AutoCAD, 3D Studio Max, Revit, and Civil 3D for modeling. It also covers project scheduling with Microsoft Project and Primavera, structural design with Sap2000, hydraulic design using EPANET, surveying applications like Micro Survey CAD Studio, and mathematical calculations in MatLab. Programming languages allow civil engineers to perform tasks like drafting, modeling, scheduling, structure design, and calculations more efficiently.
Norms of Morality
Norm
Norm of Morality
• Types of norm:
Eternal Divine Law
Human Reason
Law as the object norm of morality
• General Notion of Law
o Law of Nature
o Natural Law
Moral Law
o Essential Elements for a Law to be Reasonable:
• Divisions of Law
o Eternal Law
The Natural Moral Law
Law of Conscience
i. Attributes of the Natural Law
ii. The Contents of Natural Law
Formal norms
Material norms
Human Positive Law
Law as the subject norm of morality
Conscience
• Conscience as an Act of Intellect
(Judgement of Reason)
• Conscience as a Practical Moral Judgement
• Conscience as the Proximate Norm of Morality
• Kinds of Conscience
i. Correct or True Conscience
ii. Erroneous of False conscience
Invincibly erroneous conscience
Vincibly erroneous conscience
Perplexed conscience
Pharisaical conscience
i. Certain Conscience
ii. Doubtful Conscience
iii. Scrupulous Conscience
iv. Lax Conscience
Novedades de AutoCAD LT 2013
The document summarizes the new features of AutoCAD LT 2013 software. Key new features include the ability to connect to Autodesk 360 cloud services, enhanced command line functionality, a property edit preview tool, improved array and hatch editing tools, and support for Mac and updated file formats.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdChapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
More Related Content
Viewers also liked
Models of Communication
Models of Communication
• Aristotelian
• Lasswell
• Shannon-Weaver
• Schramm
• Berlo
• White
SUMMARRY:
MODELS FOCUS FEATURE
1. Aristotle Speaker, Message, listener One way process
2. Lasswell Speaker, Message, Receiver, channel, effect Linear and sequential
3. Shannon-Weaver Information, source, transmitter, receiver, destination, noise Linear , sequential
4. Schramm Communicators, messages, and field of experience Interactive, circular
5. Berlo Source, message, channel, and receiver Almost complete model but suggests linearity
6. White Eight stages: thinking, symbolizing, expressing, transmitting, receiving, decoding, feedback Cyclical and sequential relationship
Autocad Drawing Sample 1
This document provides specifications for drawing different line types including solid, hidden, centered, dashed, and divided lines with varying widths between 0.25mm and 0.40mm and a hidden, centered, or divided spacing of 0.13mm.
Site Development Plan 1
This site development plan shows a vegetable garden and a fruit garden separated by a road. The plan labels two areas as gardens on either side of a centrally located road.
Deontological Ethical Theory
Topic: DEONTOLOGICAL ETHICAL THEORY
Contents:
A. Historical Origin
Early beginning of human civilization
• The word of the king is the law
Deontological
Greek word “dein” or “deon” meaning “To be obligated” or simply “duty”
B.Kants’ Major Contribution to Deontological Theory
Immanuel Kant (1724-1804)
• Avid defender of deontological theory
• Contributed as many important and brilliant ideas to the philosophical study of ethics
C.The Good Will: The Core of Kant’s Ethics
Morality of an action lies on the inner motive rather than the external effects
Kants’ ethics primarily based on good will
Duty must be done out of pure reverence to the moral law
D.Duty over Inclination
“A person is only acting morally only when he suppresses his feelings and inclinations and does that which he is obliged to do”
Inclination
means doing the things that one’s feels like doing, and thus no obligation exists.
Example:
Helping your neighbor to fix her flat tire.
• Three possible reasons of helping:
1) Expectation of the reward-immoral
2) Pity-immoral
3) Duty-moral
1 is done out of desire to get a reward and 2 is done out of emotion thus, the acts are considered immoral. On the other hand, 3 is done out of obligation and this makes the act moral.
E.Duty is Superior to Happiness
“Our duties cannot consist simply in following rules that promote pleasure and avoidance of pain as the utilitarian’s claim, since that would make right actions depend upon consequences, on how well they satisfied our desires”
Example:
1) Lying
2) Breaking promise
The above examples are immoral actions not because it can create bad consequences but because these are wrong in itself.
F.The Categorical Imperative: The Universalizability Principle
“Act only according to that maxim by which you can at the same time will that it should become a universal law”
Maxim is a personal and subjective guiding principle
We must universalize our moral judgement
G.The Principle of Humanity (Respect for Persons)
Also known as ’Principle of Ends’
Concerns respect for the dignity of persons
Rational beings are ends in themselves
Do not treat others as means
H.Autonomy of The Will (Kingdom of Ends)
“For without personal autonomy, Morality becomes an impossibility”
Autonomous will
The will becomes autonomous when the genuinely moral actions are chosen:
• Freely
• Rationally
• By The Self (Autonomously)
Kingdom of ends
It is a moral universe of the moral beings in which:
• Respect for Intrinsic Worth
• Respect for Value of All Persons
is exercised by everyone.
Categorical Syllogism
ON CATEGORICAL SYLLOGISM
LEGEND
U - universal / P - particular
A - affirmative / N - negative
3 PROPOSITIONS
- MAJOR Premise (first premise)
- MINOR Premise (second premise)
- Conclusion
Rule in constructing the argument:
UUU / UPP / PUP
AAA / ANA / NAN
ON THE TERMS (3 terms)
MAJOR term
- the Predicate of the Conclusion and is found in the Major premise (subject or predicate)
MINOR term
- the Subject of the Conclusion and is found in the Minor premise (subject or predicate)
MIDDLE term
- found in the major and minor premises but not in the conclusion
ON FIGURE (CATEGORICAL SYLLOGISM)
FIGURE-refers to the arrangement of MIDDLE term in the two premises in the syllogism
CONT.
ON MOODS (CATEGORICAL SYLLOGISM)
MOODS refers to the pattern of the types of proposition used in the syllogism.
Morality of Human Acts
MORALITY OF HUMAN ACTS
Human Acts
Acts of Man
Basic Element of Human Acts
• Types of Voluntariness
Major Determinants of the Morality of Human Acts
Four Types of Circumstances
Specific Types of Circumstances
Modifiers of Human Acts
1) Ignorance
• Types of Ignorance
2) Passion
3) Fear
Act done ‘with’ fear
Act done ‘out’ of fear
4) Violence
5) Habit
Auto Cad 2013 Certificate Level 3
Carl Bass, President and CEO of Autodesk, has issued a certificate of completion to Armand Louw for successfully completing the 21-hour Autocad Advanced course taught by instructor Petrus Hendrik Kloppers at the Professional Drafting Services Autodesk Authorized Training Center. The course, completed on November 27, 2013, was designed by Autodesk to provide professionals with relevant AutoCAD skills and content from authorized instructors and materials.
Auto cad lt 2013 for pc
AutoCAD LT 2013 software allows users to capture design concepts, produce precise 2D technical drawings, and document ideas using comprehensive 2D drafting and detailing tools. It enables collaboration by allowing users to create DWG files and share work with colleagues and clients. AutoCAD LT 2013 aims to increase productivity with intuitive tools focused on efficient design documentation.
AutoCAD succinctly
AutoCAD is a Computer Aided Design and Drafting (CADD) software application, developed by Autodesk and used across a wide range of industries by architects, engineers, graphic designers, project managers, and in 3D modeling, just to mention a few.
Autodesk also develops vertical solutions, using AutoCAD as a base platform, including enhanced features for many different disciplines, and a light version called AutoCAD LT (or AutoCAD Light) which does not include 3D design capabilities and advanced customization and programming, while AutoCAD offers very powerful tools for 3D modeling and customization.
This book covers common AutoCAD 2016 features. Users running other AutoCAD vertical solutions or AutoCAD LT and some older releases of AutoCAD may use this book as a quick-start guide for working with the product.
Try my comprehensive quiz to assess your knowledge at: http://www.proprofs.com/quiz-school/story.php?title=NzIyMzUz5920&setprice=NzIyMDgy
Celina’S Presentation Autocad
AutoCAD is a CAD software initially released in 1982 as one of the first CAD programs usable on personal computers rather than mainframe computers. It uses basic entities like lines and circles to create complex objects and supports customization through APIs. Over time, AutoCAD has added increased 3D modeling, rendering, and solid modeling capabilities to enable unique 2D and 3D designs for applications such as human factors assessments.
Eduction
Types of Eduction:
a. conversion
1. simple conversion
2. partial conversion
b. obversion
c. contraposition
1. simple contraposition
2. complete contraposition
d. inversion
1. simple inversion
2. complete inversion
Application of programming languages in civil engineering
This document provides an overview of various computer applications used in civil engineering. It discusses 2D and 3D drafting programs like QCAD, AutoCAD, 3D Studio Max, Revit, and Civil 3D for modeling. It also covers project scheduling with Microsoft Project and Primavera, structural design with Sap2000, hydraulic design using EPANET, surveying applications like Micro Survey CAD Studio, and mathematical calculations in MatLab. Programming languages allow civil engineers to perform tasks like drafting, modeling, scheduling, structure design, and calculations more efficiently.
Norms of Morality
Norm
Norm of Morality
• Types of norm:
Eternal Divine Law
Human Reason
Law as the object norm of morality
• General Notion of Law
o Law of Nature
o Natural Law
Moral Law
o Essential Elements for a Law to be Reasonable:
• Divisions of Law
o Eternal Law
The Natural Moral Law
Law of Conscience
i. Attributes of the Natural Law
ii. The Contents of Natural Law
Formal norms
Material norms
Human Positive Law
Law as the subject norm of morality
Conscience
• Conscience as an Act of Intellect
(Judgement of Reason)
• Conscience as a Practical Moral Judgement
• Conscience as the Proximate Norm of Morality
• Kinds of Conscience
i. Correct or True Conscience
ii. Erroneous of False conscience
Invincibly erroneous conscience
Vincibly erroneous conscience
Perplexed conscience
Pharisaical conscience
i. Certain Conscience
ii. Doubtful Conscience
iii. Scrupulous Conscience
iv. Lax Conscience
Novedades de AutoCAD LT 2013
The document summarizes the new features of AutoCAD LT 2013 software. Key new features include the ability to connect to Autodesk 360 cloud services, enhanced command line functionality, a property edit preview tool, improved array and hatch editing tools, and support for Mac and updated file formats.
Viewers also liked (15)
Application of programming languages in civil engineering
Application of programming languages in civil engineering
Recently uploaded
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdChapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaIntroduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
CACJapan - GROUP Presentation 1- Wk 4.pdf
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Assessment and Planning in Educational technology.pptx
In an education system, it is understood that assessment is only for the students, but on the other hand, the Assessment of teachers is also an important aspect of the education system that ensures teachers are providing high-quality instruction to students. The assessment process can be used to provide feedback and support for professional development, to inform decisions about teacher retention or promotion, or to evaluate teacher effectiveness for accountability purposes.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Recently uploaded (20)
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Assessment and Planning in Educational technology.pptx
Assessment and Planning in Educational technology.pptx
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Autocad Drawing Sample 3
- 1. GLASSPROFILE