Wireless data logging and process plant monitoring solutions provide an alternative to manual data collection methods. The document discusses opportunities to integrate real-time field equipment data with distributed control systems using mobile devices for data collection. PlantMS is an example of a solution that allows operators to collect data using rugged handheld devices, access readings and trends online, and receive alarms to monitor critical process parameters without paper log sheets. Modules are available to calculate efficiency and specific operating parameters to help optimize processes like demineralizer regeneration cycles.
SAFETY Commander is powerful safety assessment software that provides unprecedented control over safety tasks and integration of systems from various suppliers. It allows users to create integrated fault trees, calculate failure probabilities, generate reports, and collaborate with system suppliers. SAFETY Commander's modules help users perform functional hazard assessments, fault tree analysis, and manage minimal equipment lists. It provides a single database to integrate analysis of multiple systems into an overall platform assessment.
WAM - Web-enabled Alarm Management for Invensys System Platform, Archestra, Intouch, Infusion, Foxboro Control Software users.
For more information visit: http://www.ureason.com or http://www.wonderware.com/solution_providers/isv/PartnerProductSpec.asp?ProductID=7730
Untuk pemesanan produk dan informasi lebih lanjut, silakan menghubungi kami. Siwali Jakarta : 021-45850618 || Siwali Surabaya : 031-8421264
Distributor Rotronic di Indonesia - PT. Siwali Swantika (www.siwali.com)
Data Acquisition presentation for DG sets-chillers-ACsHema Instruments
This document describes a supervisory control and data acquisition (SCADA) system installed at a pharmaceutical company to monitor diesel generators, chillers, air conditioners, and data center temperatures. The system displays the equipment status and generates SMS alerts if temperatures exceed or fall below setpoints. It also monitors power failures and allows authorized users to view trends, alarms, and configure settings. Temperature data is graphically displayed and can be zoomed in on for precise monitoring. The system requirements include a programmable logic controller, desktop computer, SCADA software, GSM module, SIM card, and Microsoft Access for data storage. Contact information is provided for the automation and control solutions supplier.
This presentation discusses graceful degradation and fault tolerance in computing systems. It covers topics like degradation allowance, diagnosis and isolation of faulty components, checkpointing and rollback for recovery, and optimal checkpoint insertion. Checkpointing involves periodically saving the state of a computation to allow restarting from the last checkpoint if a fault occurs. The optimal number of checkpoints balances the overhead of checkpointing against the work lost due to rollbacks. Various data distribution techniques like replication and dispersion are also presented to improve the reliability of data storage.
Fault tolerance techniques for real time operating systemanujos25
This document discusses fault tolerance techniques for real-time operating systems. It covers techniques for memory management, kernel considerations, process and thread management, scheduling, and I/O management. The key techniques discussed include redundancy, error correcting code memory, event logging, static scheduling tables, and replication to allow real-time operating systems to continue operating reliably in the presence of faults and failures. The goal of these techniques is to ensure safety-critical systems can meet all requirements and avoid catastrophes even if faults occur.
Wireless data logging and process plant monitoring solutions provide an alternative to manual data collection methods. The document discusses opportunities to integrate real-time field equipment data with distributed control systems using mobile devices for data collection. PlantMS is an example of a solution that allows operators to collect data using rugged handheld devices, access readings and trends online, and receive alarms to monitor critical process parameters without paper log sheets. Modules are available to calculate efficiency and specific operating parameters to help optimize processes like demineralizer regeneration cycles.
SAFETY Commander is powerful safety assessment software that provides unprecedented control over safety tasks and integration of systems from various suppliers. It allows users to create integrated fault trees, calculate failure probabilities, generate reports, and collaborate with system suppliers. SAFETY Commander's modules help users perform functional hazard assessments, fault tree analysis, and manage minimal equipment lists. It provides a single database to integrate analysis of multiple systems into an overall platform assessment.
WAM - Web-enabled Alarm Management for Invensys System Platform, Archestra, Intouch, Infusion, Foxboro Control Software users.
For more information visit: http://www.ureason.com or http://www.wonderware.com/solution_providers/isv/PartnerProductSpec.asp?ProductID=7730
Untuk pemesanan produk dan informasi lebih lanjut, silakan menghubungi kami. Siwali Jakarta : 021-45850618 || Siwali Surabaya : 031-8421264
Distributor Rotronic di Indonesia - PT. Siwali Swantika (www.siwali.com)
Data Acquisition presentation for DG sets-chillers-ACsHema Instruments
This document describes a supervisory control and data acquisition (SCADA) system installed at a pharmaceutical company to monitor diesel generators, chillers, air conditioners, and data center temperatures. The system displays the equipment status and generates SMS alerts if temperatures exceed or fall below setpoints. It also monitors power failures and allows authorized users to view trends, alarms, and configure settings. Temperature data is graphically displayed and can be zoomed in on for precise monitoring. The system requirements include a programmable logic controller, desktop computer, SCADA software, GSM module, SIM card, and Microsoft Access for data storage. Contact information is provided for the automation and control solutions supplier.
This presentation discusses graceful degradation and fault tolerance in computing systems. It covers topics like degradation allowance, diagnosis and isolation of faulty components, checkpointing and rollback for recovery, and optimal checkpoint insertion. Checkpointing involves periodically saving the state of a computation to allow restarting from the last checkpoint if a fault occurs. The optimal number of checkpoints balances the overhead of checkpointing against the work lost due to rollbacks. Various data distribution techniques like replication and dispersion are also presented to improve the reliability of data storage.
Fault tolerance techniques for real time operating systemanujos25
This document discusses fault tolerance techniques for real-time operating systems. It covers techniques for memory management, kernel considerations, process and thread management, scheduling, and I/O management. The key techniques discussed include redundancy, error correcting code memory, event logging, static scheduling tables, and replication to allow real-time operating systems to continue operating reliably in the presence of faults and failures. The goal of these techniques is to ensure safety-critical systems can meet all requirements and avoid catastrophes even if faults occur.
Lumension Security Solutions provides integrated security solutions including vulnerability management, endpoint protection, data protection, and security & compliance reporting. The vulnerability management solution uses discovery, assessment, prioritization, and remediation to identify and address vulnerabilities across an organization's entire network. The endpoint protection solution authorizes only trusted applications to increase productivity and lower support costs. The data protection solution controls data flow and encrypts data to devices for compliance. Lumension offers a consolidated view of security risks and reporting across the entire enterprise from one management platform.
[White paper] detecting problems in industrial networks though continuous mon...TI Safe
Automation networks offer a range of real-time applications and data, making necessary the continuous monitoring of the quality of services. The parameters of QoS (Quality of Service) seek to address priorities, bandwidth allocation and network latency control. There are several QoS parameters to characterize a computer network, and that can be used for monitoring purposes.
Each SCADA network, in a healthy state, presents a specific QoS which rarely changes given the repetitive process of the IACS operations. The continuous monitoring of QoS parameters of an automation network may anticipate problems such as malware contamination and equipment failures like switches and routers. It is very important to be aware of these changes in behavior in order to receive alerts and promptly handle them, avoiding incidents that could compromise the operation of the network and be financially or environmentally costly.
In addition to the monitoring of network traffic, it is also necessary to monitor resource consumption of critical servers, such as the processing (CPU), memory, storage capacity and hard disk failures, among others.
This work aims to establish a method by which SCADA security professionals can differentiate and qualify any problems that may be occurring through continuous monitoring of the automation network performance parameters giving a more behavioral approach than current signature-based ones.
We presented a series of tests conducted in our laboratories in order to measure the performance of a simulated automation network parameters using a small SCADA network sandbox. First we measured the normal operating parameters of the network and reap its main graphics obtained with the proper tools. In a second step we practiced several attacks against the simulated automation network. During all attacks we collected the operating parameters of the network and its main graphics.
At the conclusion of the work we compared the graphs of the network in healthy state with the graphs of the network with the security incidents described above. We detailed how the network parameters were affected by each kind of incident and built a table showing the way the main parameters of an automation network were affected by the attacks
Azeti is an innovative manufacturer that helps businesses achieve operational excellence in IT operations and infrastructure management through its two product lines, Monitoring and Security. It has over 200 monitoring customers, 1000 security customers, and partners in over 35 countries. After securing venture capital funding, Azeti will accelerate its international growth to become the global leader in both operational areas by providing outstanding appliance-based solutions.
Cyber Defense - Annunciators as watcher for critical process applicationsM.S. Jacobs & Associates
DCS/PLC and SCADA control systems, though they provide immense capability, share a common weakness. Both are subject to cyber attack from external sources. The potential impact of this vulnerability should not be dismissed. An annunciator system can be put in place that will monitor critical process elements and provide notification of abnormalities. The systems, whether hardwired or software based, are isolated, allowing them to act as a failsafe or backup to the main control and monitoring system.
DCS/PLC and SCADA control systems, though they provide immense capability, share a common weakness. Both are subject to cyber attack from external sources. The potential impact of this vulnerability should not be dismissed. An annunciator system can be put in place that will monitor critical process elements and provide notification of abnormalities. The systems, whether hardwired or software based, are isolated, allowing them to act as a failsafe or backup to the main control and monitoring system.
Improve Process Control Security Using Annunciators as WatchersFlow-Tech, Inc.
Software-based systems are vulnerable to cyber attacks. Most of the industrial control networks (CAN, PROFI, Control Area, Ethernet and RS485) connect to the internet or other computer networks which are not fully protected from hackers and viruses. Present day industrial DCS/PLC control systems come with redun- dancy systems to eliminate shutdowns in case of DCS/PLC hardware failures. However, this does not protect your DCS/PLC system from any type of cyber attack. Without proper protection, the safety and/or operation of your plant or business are put at great risk.
Overall Security Process Review CISC 6621Agend.docxkarlhennesey
Overall Security Process Review
CISC 662
1
Agenda
Review of the following technologies and current products:
SIEM
CASB
EDR (Enterprise Detection and Response)
NGFW (Next Generation Firewalls)
Threat Intelligence
Summary of Term
SANS Technology Institute - Candidate for Master of Science Degree
What is a SIEM?
SIEM - Security Information Event Management
Logging and Event Aggregation
Network (router,switch,firewall,etc)
System (Server,workstation,etc)
Application (Web, DB )
Correlation Engine
2+ related events = higher alarm (1+1=3)
3
At first glance SIEM's appliances and software look like an event aggregator. While a SIEM has the advantage of aggregating logs what puts them apart from the event aggregator market are the correlation engines.
The correlation engines allow the ability to uncover threats/attacks across multiple related events which by themselves would not be a cause for alarm.
SIEM
4
What is a SIEM?
5
Security information and event management (SIEM) is the technology that can tie all your systems together and give you a comprehensive view of IT security.
IT security is typically a patchwork of technologies – firewalls, intrusion prevention, endpoint protection, threat intelligence and the like – that work together to protect an organization’s network and data from hackers and other threats. Tying all those disparate systems together is another challenge, however, and that’s where SIEM can help.
SIEM systems manage and make sense of security logs from all kinds of devices and carry out a range of functions, including spotting threats, preventing breaches before they occur, detecting breaches, and providing forensic information to determine how a security incident occurred as well as its possible impact.
Using SIEM
How do SIEM Products help the following Security concerns?
Countermeasures to detect attempts to infect internal system
Identification of infected systems trying to exfiltrate information
Mitigation of the impact of infected systems
Detection of outbound sensitive information ( DLP)
6
These questions are a core part of a companies overall security architecture. If a SIEM isn't providing answers or solutions to these questions what is it doing?
If you aren't using your SIEM to solve issues like these it may just be an expensive log aggregator/collection system sitting in your network collecting dust.
SIEM Advantages
Correlation of data from multiple systems and from different events detecting security and operational conditions
Anomaly detection by using a baseline of events over time to find deviations from expected or normal behavior
Comprehensive view into an environment based on event types, protocols, log sources, etc
APT (advanced persistent threat) protection through detection of protocol and application anomalies
Prioritization based on risk of threat to assets, staff can triage the most vulnerable targets
Alerting and monitoring on events of interest to escalate pri ...
This document provides an overview of NetWatcher's managed detection and response security services. It describes NetWatcher's cloud-based security stack that provides enterprise-level security capabilities typically reserved for large organizations to SMBs through an affordable software-as-a-service model. The summary highlights NetWatcher's security tools and features like sensors, endpoint agents, threat intelligence, compliance reporting, vulnerability scanning, and a customer portal for viewing alerts and scores.
The document discusses Asset Insight, a solution for monitoring and managing assets. It provides functionality for asset management, risk management, reliability analysis, condition monitoring and capacity management. Recent deployments include projects with ICR involving 6 datacenters and 11 colocation sites. The Co-operative Group deployment involves monitoring 240 critical assets. What clients say highlights benefits like preventing downtime by detecting changes in asset operation.
nTireCAMS – Computerized Asset Management and Computerized Maintenance Management Software is one of most developed arrangement accessible in the business sector for dealing with any sort objects viz. Settled Assets, Plant Machineries, Virtual Assets and so forth. nTireCAMS is produced with a target to deal with the Assets with least endeavors, to guarantee High Availability and Lower Operational Cost. More than 100+ man years of experience made nTireCAMS promptly deployable for any Industry. nTireCAMS can be conveyed inside of 4 weeks and has inbuilt motors for transferring existing Assets rapidly. nTireCAMS has likewise got Barcode era utility with which Barcodes can be produced and printed. nTireCAMS is RFID and Bar-code consistent for following the benefit. Our Sunsmart Global Ltd established this service since 2005 and customers got fully satisfied with our services.
The SIEM market grew 30% in 2008 and demand remains strong despite difficult economic conditions. However, many companies still struggle to realize benefits from their SIEM solutions. CorreLog provides a SIEM platform that uses real-time event correlation, high-speed indexing, and flexible reporting to help organizations address challenges like prioritizing threats, reducing false positives, and ensuring compliance. CorreLog has over 200 customers globally and its solution integrates with existing management tools while providing a single pane of glass for security visibility.
The Rhodium Incident Management Suite provides a cloud-based solution for coordinating response to incidents from daily to large-scale multi-agency events. Developed by professionals with over 60 years of experience, it is deployed by hundreds of public safety organizations. Rhodium allows real-time collaboration between responders, integrates with computer-aided dispatch systems, and provides tools for planning, tracking resources, and after-action reporting.
The Advanced Monitoring and Troubleshooting System (AMTS) is a comprehensive traffic analysis system that monitors switches and calculates key performance metrics. It features charts, tables, reports, alerts, call detail record viewing, and flexible user management. The AMTS monitors objects like customers, vendors, and equipment, as well as relationships between them. It calculates numerous metrics including current calls, call attempts, connected calls, switched minutes, and financial calculations. It provides alerts, reports, customizable screens and menus, and the ability to monitor via Simple Network Management Protocol.
The document discusses security monitoring solutions AlterPoint and CS-MARS. AlterPoint provides centralized device configuration and monitoring across routers, switches, firewalls and access points. It allows viewing current and historical device configurations and comparing configurations. CS-MARS is a security information and event manager that collects data from security devices and correlates events to detect attacks. It provides a summary dashboard of security incidents, hotspots and attack diagrams showing the path of incidents across the network.
The product have to be used for manage corporate IP-networks. Tackled tasks:
- Inventory of network hardware and software;
- Monitoring and Control;
- Reporting.
Brochure of Yokogawa's Fast/Tools Supervisory SystemsYokogawa
The document summarizes the capabilities of the FAST/TOOLS supervisory control and data acquisition (SCADA) system. It describes FAST/TOOLS as a powerful, state-of-the-art, flexible distributed operations and information system that utilizes the latest IT technology. The system offers reliability, availability, security, integration capabilities and comprehensive functions for alarm management, trending, reporting and more. It can be deployed globally using a web-based architecture and supports oil and gas, manufacturing and other critical industrial applications.
This document discusses various modeling techniques used during the analysis phase of software engineering. It covers scenario-based modeling including use cases, activity diagrams, and swimlane diagrams. It also discusses flow-oriented modeling using data flow diagrams and grammars. Additionally, it discusses class-based modeling including identifying analysis classes, class diagrams, and the class-responsibility-collaborator technique. Finally, it discusses behavioral modeling including identifying events and creating state and sequence diagrams.
Intelligent Dashboard is a software utility that pulls together data from multiple sources and displays it in a single user interface making it easy for the operator to monitor and manage. Intelligent Dashboard provides a unified graphical platform for the operators to manage and visualization all system alarms. The system also gives the operator the option to view live video feeds of the areas that have an alarm. The system provides maintenance management software and system wide management reports. This system will combine the ZEAG cash management system, Intelligent Parking System, ANPR and CCTV camera system all into one easy to use interface for the Etihad Towers Parking System.
The document discusses AlienVault's USM Appliance product which provides unified security management and visibility for organizations. It offers asset discovery, vulnerability assessment, intrusion detection, behavioral monitoring, and SIEM capabilities through an integrated platform. The USM Appliance is available in various hardware and virtual appliance models that can be deployed individually or together based on an organization's needs and environment. It also includes integrated threat intelligence to help customers detect and respond to emerging threats.
@Station is an Integrated Control and Protection designed for the operation of transmission and distribution substations. The system incorporates the latest technology in the field of substation automation to provide its users with innovative solutions to their requirements.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Lumension Security Solutions provides integrated security solutions including vulnerability management, endpoint protection, data protection, and security & compliance reporting. The vulnerability management solution uses discovery, assessment, prioritization, and remediation to identify and address vulnerabilities across an organization's entire network. The endpoint protection solution authorizes only trusted applications to increase productivity and lower support costs. The data protection solution controls data flow and encrypts data to devices for compliance. Lumension offers a consolidated view of security risks and reporting across the entire enterprise from one management platform.
[White paper] detecting problems in industrial networks though continuous mon...TI Safe
Automation networks offer a range of real-time applications and data, making necessary the continuous monitoring of the quality of services. The parameters of QoS (Quality of Service) seek to address priorities, bandwidth allocation and network latency control. There are several QoS parameters to characterize a computer network, and that can be used for monitoring purposes.
Each SCADA network, in a healthy state, presents a specific QoS which rarely changes given the repetitive process of the IACS operations. The continuous monitoring of QoS parameters of an automation network may anticipate problems such as malware contamination and equipment failures like switches and routers. It is very important to be aware of these changes in behavior in order to receive alerts and promptly handle them, avoiding incidents that could compromise the operation of the network and be financially or environmentally costly.
In addition to the monitoring of network traffic, it is also necessary to monitor resource consumption of critical servers, such as the processing (CPU), memory, storage capacity and hard disk failures, among others.
This work aims to establish a method by which SCADA security professionals can differentiate and qualify any problems that may be occurring through continuous monitoring of the automation network performance parameters giving a more behavioral approach than current signature-based ones.
We presented a series of tests conducted in our laboratories in order to measure the performance of a simulated automation network parameters using a small SCADA network sandbox. First we measured the normal operating parameters of the network and reap its main graphics obtained with the proper tools. In a second step we practiced several attacks against the simulated automation network. During all attacks we collected the operating parameters of the network and its main graphics.
At the conclusion of the work we compared the graphs of the network in healthy state with the graphs of the network with the security incidents described above. We detailed how the network parameters were affected by each kind of incident and built a table showing the way the main parameters of an automation network were affected by the attacks
Azeti is an innovative manufacturer that helps businesses achieve operational excellence in IT operations and infrastructure management through its two product lines, Monitoring and Security. It has over 200 monitoring customers, 1000 security customers, and partners in over 35 countries. After securing venture capital funding, Azeti will accelerate its international growth to become the global leader in both operational areas by providing outstanding appliance-based solutions.
Cyber Defense - Annunciators as watcher for critical process applicationsM.S. Jacobs & Associates
DCS/PLC and SCADA control systems, though they provide immense capability, share a common weakness. Both are subject to cyber attack from external sources. The potential impact of this vulnerability should not be dismissed. An annunciator system can be put in place that will monitor critical process elements and provide notification of abnormalities. The systems, whether hardwired or software based, are isolated, allowing them to act as a failsafe or backup to the main control and monitoring system.
DCS/PLC and SCADA control systems, though they provide immense capability, share a common weakness. Both are subject to cyber attack from external sources. The potential impact of this vulnerability should not be dismissed. An annunciator system can be put in place that will monitor critical process elements and provide notification of abnormalities. The systems, whether hardwired or software based, are isolated, allowing them to act as a failsafe or backup to the main control and monitoring system.
Improve Process Control Security Using Annunciators as WatchersFlow-Tech, Inc.
Software-based systems are vulnerable to cyber attacks. Most of the industrial control networks (CAN, PROFI, Control Area, Ethernet and RS485) connect to the internet or other computer networks which are not fully protected from hackers and viruses. Present day industrial DCS/PLC control systems come with redun- dancy systems to eliminate shutdowns in case of DCS/PLC hardware failures. However, this does not protect your DCS/PLC system from any type of cyber attack. Without proper protection, the safety and/or operation of your plant or business are put at great risk.
Overall Security Process Review CISC 6621Agend.docxkarlhennesey
Overall Security Process Review
CISC 662
1
Agenda
Review of the following technologies and current products:
SIEM
CASB
EDR (Enterprise Detection and Response)
NGFW (Next Generation Firewalls)
Threat Intelligence
Summary of Term
SANS Technology Institute - Candidate for Master of Science Degree
What is a SIEM?
SIEM - Security Information Event Management
Logging and Event Aggregation
Network (router,switch,firewall,etc)
System (Server,workstation,etc)
Application (Web, DB )
Correlation Engine
2+ related events = higher alarm (1+1=3)
3
At first glance SIEM's appliances and software look like an event aggregator. While a SIEM has the advantage of aggregating logs what puts them apart from the event aggregator market are the correlation engines.
The correlation engines allow the ability to uncover threats/attacks across multiple related events which by themselves would not be a cause for alarm.
SIEM
4
What is a SIEM?
5
Security information and event management (SIEM) is the technology that can tie all your systems together and give you a comprehensive view of IT security.
IT security is typically a patchwork of technologies – firewalls, intrusion prevention, endpoint protection, threat intelligence and the like – that work together to protect an organization’s network and data from hackers and other threats. Tying all those disparate systems together is another challenge, however, and that’s where SIEM can help.
SIEM systems manage and make sense of security logs from all kinds of devices and carry out a range of functions, including spotting threats, preventing breaches before they occur, detecting breaches, and providing forensic information to determine how a security incident occurred as well as its possible impact.
Using SIEM
How do SIEM Products help the following Security concerns?
Countermeasures to detect attempts to infect internal system
Identification of infected systems trying to exfiltrate information
Mitigation of the impact of infected systems
Detection of outbound sensitive information ( DLP)
6
These questions are a core part of a companies overall security architecture. If a SIEM isn't providing answers or solutions to these questions what is it doing?
If you aren't using your SIEM to solve issues like these it may just be an expensive log aggregator/collection system sitting in your network collecting dust.
SIEM Advantages
Correlation of data from multiple systems and from different events detecting security and operational conditions
Anomaly detection by using a baseline of events over time to find deviations from expected or normal behavior
Comprehensive view into an environment based on event types, protocols, log sources, etc
APT (advanced persistent threat) protection through detection of protocol and application anomalies
Prioritization based on risk of threat to assets, staff can triage the most vulnerable targets
Alerting and monitoring on events of interest to escalate pri ...
This document provides an overview of NetWatcher's managed detection and response security services. It describes NetWatcher's cloud-based security stack that provides enterprise-level security capabilities typically reserved for large organizations to SMBs through an affordable software-as-a-service model. The summary highlights NetWatcher's security tools and features like sensors, endpoint agents, threat intelligence, compliance reporting, vulnerability scanning, and a customer portal for viewing alerts and scores.
The document discusses Asset Insight, a solution for monitoring and managing assets. It provides functionality for asset management, risk management, reliability analysis, condition monitoring and capacity management. Recent deployments include projects with ICR involving 6 datacenters and 11 colocation sites. The Co-operative Group deployment involves monitoring 240 critical assets. What clients say highlights benefits like preventing downtime by detecting changes in asset operation.
nTireCAMS – Computerized Asset Management and Computerized Maintenance Management Software is one of most developed arrangement accessible in the business sector for dealing with any sort objects viz. Settled Assets, Plant Machineries, Virtual Assets and so forth. nTireCAMS is produced with a target to deal with the Assets with least endeavors, to guarantee High Availability and Lower Operational Cost. More than 100+ man years of experience made nTireCAMS promptly deployable for any Industry. nTireCAMS can be conveyed inside of 4 weeks and has inbuilt motors for transferring existing Assets rapidly. nTireCAMS has likewise got Barcode era utility with which Barcodes can be produced and printed. nTireCAMS is RFID and Bar-code consistent for following the benefit. Our Sunsmart Global Ltd established this service since 2005 and customers got fully satisfied with our services.
The SIEM market grew 30% in 2008 and demand remains strong despite difficult economic conditions. However, many companies still struggle to realize benefits from their SIEM solutions. CorreLog provides a SIEM platform that uses real-time event correlation, high-speed indexing, and flexible reporting to help organizations address challenges like prioritizing threats, reducing false positives, and ensuring compliance. CorreLog has over 200 customers globally and its solution integrates with existing management tools while providing a single pane of glass for security visibility.
The Rhodium Incident Management Suite provides a cloud-based solution for coordinating response to incidents from daily to large-scale multi-agency events. Developed by professionals with over 60 years of experience, it is deployed by hundreds of public safety organizations. Rhodium allows real-time collaboration between responders, integrates with computer-aided dispatch systems, and provides tools for planning, tracking resources, and after-action reporting.
The Advanced Monitoring and Troubleshooting System (AMTS) is a comprehensive traffic analysis system that monitors switches and calculates key performance metrics. It features charts, tables, reports, alerts, call detail record viewing, and flexible user management. The AMTS monitors objects like customers, vendors, and equipment, as well as relationships between them. It calculates numerous metrics including current calls, call attempts, connected calls, switched minutes, and financial calculations. It provides alerts, reports, customizable screens and menus, and the ability to monitor via Simple Network Management Protocol.
The document discusses security monitoring solutions AlterPoint and CS-MARS. AlterPoint provides centralized device configuration and monitoring across routers, switches, firewalls and access points. It allows viewing current and historical device configurations and comparing configurations. CS-MARS is a security information and event manager that collects data from security devices and correlates events to detect attacks. It provides a summary dashboard of security incidents, hotspots and attack diagrams showing the path of incidents across the network.
The product have to be used for manage corporate IP-networks. Tackled tasks:
- Inventory of network hardware and software;
- Monitoring and Control;
- Reporting.
Brochure of Yokogawa's Fast/Tools Supervisory SystemsYokogawa
The document summarizes the capabilities of the FAST/TOOLS supervisory control and data acquisition (SCADA) system. It describes FAST/TOOLS as a powerful, state-of-the-art, flexible distributed operations and information system that utilizes the latest IT technology. The system offers reliability, availability, security, integration capabilities and comprehensive functions for alarm management, trending, reporting and more. It can be deployed globally using a web-based architecture and supports oil and gas, manufacturing and other critical industrial applications.
This document discusses various modeling techniques used during the analysis phase of software engineering. It covers scenario-based modeling including use cases, activity diagrams, and swimlane diagrams. It also discusses flow-oriented modeling using data flow diagrams and grammars. Additionally, it discusses class-based modeling including identifying analysis classes, class diagrams, and the class-responsibility-collaborator technique. Finally, it discusses behavioral modeling including identifying events and creating state and sequence diagrams.
Intelligent Dashboard is a software utility that pulls together data from multiple sources and displays it in a single user interface making it easy for the operator to monitor and manage. Intelligent Dashboard provides a unified graphical platform for the operators to manage and visualization all system alarms. The system also gives the operator the option to view live video feeds of the areas that have an alarm. The system provides maintenance management software and system wide management reports. This system will combine the ZEAG cash management system, Intelligent Parking System, ANPR and CCTV camera system all into one easy to use interface for the Etihad Towers Parking System.
The document discusses AlienVault's USM Appliance product which provides unified security management and visibility for organizations. It offers asset discovery, vulnerability assessment, intrusion detection, behavioral monitoring, and SIEM capabilities through an integrated platform. The USM Appliance is available in various hardware and virtual appliance models that can be deployed individually or together based on an organization's needs and environment. It also includes integrated threat intelligence to help customers detect and respond to emerging threats.
@Station is an Integrated Control and Protection designed for the operation of transmission and distribution substations. The system incorporates the latest technology in the field of substation automation to provide its users with innovative solutions to their requirements.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
2. Agenda
1, What is Asset Insight Manager?
2, Facility location and insight
3, Summary
4, Visualise
5, DCIM Module (If needed)
6, Assets
7, Risks
8, Maintenance Module
9, Lifecycle
10, Reports
11, Live Condition Monitoring
3. AIM is a fully customisable cloud based CAFM system that enables the user/s to quickly identify
problem assets using risk, Maintenance and live monitoring assessments
AIM offers full visibility of your buildings, systems and assets on PC, Phone or tablet
It offers Risk registers and mitigation to manage, visualise, identify and prevent risk
And will send Instant email and text alerts when assets need attention
AIM is the first step towards a trouble free running of your business
What Is (AIM) Asset Insight Manager?
4. Facility Location & Insight
The first screen identifies where
your sites are on a map of the UK
An overall performance is displayed
relating to all sites Alarms, Capacity
v demand, SPOF’s, Risk & Mitigation,
Open FMEA (Failure Mode Effects Analysis)
items, and DCIM cabinets over
capacity
You can also see a summary of key
information relating to individual
sites using the “site navigation”
boxes on the left
5. Facility Location & Insight Cont.
Drill down into individual sites
Full breakdown of building
infrastructure. Electrical,
Mechanical, Fire, BMS and security
systems
Acknowledge site contact details.
Site Manager, Address, Phone
number and email.
6. Visualise (Dashboard)
The summary page shows site
specific critical data….
Monitored Assets & Assets alarming
Risks & Risks without mitigation
Building energy meter (kWh)
Mains power utilisation capacity v demand
(KVA)
DC power utilisation capacity v demand (KW)
UPS utilisation capacity v demand
At a glance overview charts for month and
year usage
7. Visualise RBD
(Reliability Block Diagram)
RBD offers a birds eye view of plant
and equipment with or without
redundancy. i.e if a unit was to fail,
would you have a backup in place.
All systems mapped out by building
and room location
Colour coded risk identity….
Red =Single point of failure (SPOF)
Yellow = Point with a single reserve
system or power supply (PSR)
Green = Two or more reserve systems,
Power supplies or no risk to critical
equipment (TOM)
8. DCIM Module
(Data Centre Infrastructure Management)
DCIM puts all of your racks and
servers in one place so you can
identify power loads of buildings,
Data Halls down to racks and
individual servers.
All systems mapped out by building
and room location
Colour coded power identity using the
chart on the screen
Shows location of floor vent tiles
Empty/free rack space is easier to locate
9. DCIM Module
(Data Centre Infrastructure Management)
Drill down into individual racks to
identify the servers within it.
All servers and rack content is displayed
Hovering over the server displays first
point info such as asset name, asset
number, owner and contact responsible
for the asset
Clicking on “view Details” allows further
in-depth info regarding condition, usage,
asset images, Thermography images and
lifecycle planning
10. Assets
Assets displays everything from
critical plant (chillers – boilers) to
building systems (Lighting – Fire
fighting) and Roof to floor (windows –
Doors)
View an assets warranty status • •
Determine an assets condition • • •
See which assets are being monitored
View Life cycle information
View asset age bands
Filter out assets that you have particular
interest in
11. Assets Cont.
Click on any asset to view
information relating to …
Asset Number
Asset location
Asset data Hierarchy
Asset images
Life cycle information
Work orders and maintenance regimes
CFC related details (Fgas Log)
12. Risk And Mitigation
Risk and Mitigation helps to
identify potential risks within your
plant and infrastructure. Assigning
a Risk score you can easily identify
High, Medium and Low risks but
also learn the required action to
mitigate these risks.
We work with you to identify risks and
agree solutions to mitigate them risks
Easy to use grid matrix with colour coded
severity levels
As threats become stable they move over
to the mitigated risk matrix
13. Risk And Mitigation Cont.
See example Risk report and how
we determine the best route to
mitigation.
Shows the risk and potential event and
scenario
See the risk score v the mitigated risk
score
View the risk improvement plan and
agree it prior to commencement
We are here to work with you in
achieving a risk free environment
14. Maintenance
The maintenance will aid the
planning of PPM on all assets
throughout.
Identifies the best and worst performing
assets
Keeps track of work orders
Log reactive maintenance
Logs MTBF (Mean Time Between Failures)
15. Lifecycle
The Lifecycle module within the
software offers you the ability to
plan and budget for your assets
replacement dates.
Shows a clear replacement date
Shows a total cost to replace plant and
assets on a year by year basis
Takes into account history and condition
of your plant
16. Reporting (New)
The new reporting module allows
the generation of bespoke business
management reports.
Risk and Finance reporting
Asset Performance and Lifecycle
reporting
Engineer performance and absence
reporting
Stock and tool shed reporting
17. Live Condition Monitoring
Condition monitoring offers you
live and meaningful data regarding
the running conditions of your
critical plant it gives an early
indication that a failure is likely to
occur.
Learns how your plant best performs
Detects and alerts you of any abnormal
operating conditions
Vibration, Acoustics, Temperature and
Power monitoring as standard
Alerts via Email and Text
18. Live Condition Monitoring
Our Condition Monitoring Solution
is almost completely wireless
Only requires a power outlet (per asset)
Sends data via RF meaning simple
installation with minimal disruption
Can be viewed on PC, Tablet or
Smartphone
Easily integrates with any CAFM system
or simply stands alone
Bespoke monitoring solutions available
19. The Hardware
Range of IP/EX rated casings available
Terminal block for external sensors
Wireless data transfer between readers &
concentrators
Compact unit houses all sensors on single
board
Fully user calibration functionality using
front end software
Internal/external and contact temp
sensors range -20 °to 120 °
Accelerometer 0-250G
Acoustic sensor 0-120db
0/10v input for External Split-core
Current Transformer
2.4gh wireless network
5Vdc supply required
20. Our approach - Overview
VISUALISATION
CAPACITY
CBM
Full DCIM Management,
Rack data down to
equipment level
FMEA
ADH for Management of
asset attributes, systems,
warranty, CFC data, history
Condition and life cycle
Management
ASSETS
Creation of registers, profiles
inc Heat maps, linked to
ADH, Mitigation
Management and post
mitigation scoring
RISKS
Interactive System reliability
block diagrams, simple
colour coding and
visualization of Power
demands
Live monitoring of assets,
Capture and Analysis of
thermography results.
CMB regimes*
FMEA with 400
templates, linked to ADH
& Risks, Scenario
planning.
RELIABILITY