The document describes several job openings at a company. The positions include an Application Engineer, Global Product Support Specialist, UVision PS, IE - Industrial Engineer, Physics Student, Algorithms Team Leader / Group Manager, Spares Senior NPI planner, Application Develop Integrative Solutions, System Engineer for SEM DR, OI System Design Engineer, Matlab Developer, and Mechanical Engineer. The roles involve responsibilities such as customer support, project management, research, and engineering. Requirements include an engineering or physics background and skills in areas like communication, problem solving, and programming.
Undergone on-job training in various streams of Test (Labview & Test stand Application development,NPI, Test Engineering, Manufacture Engineering and Diagnostic Engineering) for a period of a year in last 13 years.
Very Strong Programming knowledge in LabVIEW – NI-DAQ - Teststand
Hand on experience in executing project with NI DAQ system (PCI,PXI NI-DAQ,
RS-232 and GPIB instruments
Involved in Equipment & Instrument selection and procurement activities
Commissioning Experience of Testing Lab
Having good working knowledge with different sensors and Instrumentation
Hand on experience in designing signal conditioning and driver hardware circuits
Good team player, keen learner, problem solving ability and effective communicator
Experience with electronic circuitry (Analog/Digital)
Fluent in schematics diagram/circuitry and components specs.
Deploy myself to Plan, establish, and maintain Test & Debug setup in India Factory and get certified by the customer.
Installing Production Support Software’s and Application tool.
Follow quality policies like “Gauge Repeatability & Reproducibility (GRR), Calibration, Correlation principles” for qualifying the test setup.
Maintain DPHU (Defects per Hundred units) rate under control, yield rate, production down time by stabilizing the test setup and troubleshooting the problems that arise during the production.
Report bugs to developers and maintains documentation of test results and ensure closure.
Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).
Undergone on-job training in various streams of Test (Labview & Test stand Application development,NPI, Test Engineering, Manufacture Engineering and Diagnostic Engineering) for a period of a year in last 13 years.
Very Strong Programming knowledge in LabVIEW – NI-DAQ - Teststand
Hand on experience in executing project with NI DAQ system (PCI,PXI NI-DAQ,
RS-232 and GPIB instruments
Involved in Equipment & Instrument selection and procurement activities
Commissioning Experience of Testing Lab
Having good working knowledge with different sensors and Instrumentation
Hand on experience in designing signal conditioning and driver hardware circuits
Good team player, keen learner, problem solving ability and effective communicator
Experience with electronic circuitry (Analog/Digital)
Fluent in schematics diagram/circuitry and components specs.
Deploy myself to Plan, establish, and maintain Test & Debug setup in India Factory and get certified by the customer.
Installing Production Support Software’s and Application tool.
Follow quality policies like “Gauge Repeatability & Reproducibility (GRR), Calibration, Correlation principles” for qualifying the test setup.
Maintain DPHU (Defects per Hundred units) rate under control, yield rate, production down time by stabilizing the test setup and troubleshooting the problems that arise during the production.
Report bugs to developers and maintains documentation of test results and ensure closure.
Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).
Discussion about X ray diffraction as a part of the activity ( Seminar on analytical methods of solid state physics at major research
institutions"PSI"), that followed by a scientific trip to "Paul Scherrer Institute" and "European Organization for Nuclear Research - CERN" https://www.facebook.com/Ahmed.BaioumyAlfazary
https://eg.linkedin.com/in/ahmedhabdelmohsen
Discussion about X ray diffraction as a part of the activity ( Seminar on analytical methods of solid state physics at major research
institutions"PSI"), that followed by a scientific trip to "Paul Scherrer Institute" and "European Organization for Nuclear Research - CERN" https://www.facebook.com/Ahmed.BaioumyAlfazary
https://eg.linkedin.com/in/ahmedhabdelmohsen
This comprehensive program covers essential aspects of performance marketing, growth strategies, and tactics, such as search engine optimization (SEO), pay-per-click (PPC) advertising, content marketing, social media marketing, and more
NIDM (National Institute Of Digital Marketing) Bangalore Is One Of The Leading & best Digital Marketing Institute In Bangalore, India And We Have Brand Value For The Quality Of Education Which We Provide.
www.nidmindia.com
Brand Identity For A Sportscaster Project and Portfolio I
Applied Materials positions1
1. Application Engineer
Responsible for demos & on site customer support.
Defining new applications & methodologies to optimize system
performance.
Requirements:
B.S in Engineering (Materials, Electronics, Chemistry, Mechanics...)
and/or Physics with Excellence
No experience required
training / teaching / commanding experience (military or civilian) -
preferred
2. Global Product Support Specialist
PS
Hiring Manager: Shai Haklai & Adam Sirota
Provide technical support at customers sites
BSc in Mechanical / Electrical Engineering
Ability to independently lead projects with multiple interfaces
Problem solving skills
Travel - up to 40%
3. UVision PS
Hiring Managers : Keren Shachar
Manage Uvision customers activities and projects:
Project initiation and management at the customer site
Project initiation and management at PDC to address customers needs
Tight technical engagement with customer to understand his current challenges and
future needs.
Close communication with account and product line
Work with PD and application development to define solutions road map.
Requirements:
At least 2 years Background with Inspection application.
Good project management skills
Good communication skills
4. IE - Industrial Engineer
Hiring Manager: Amir Salomon
Create optimize Mfg’ process & readiness to Mass production and develop & implement
cost effective solutions as part of AMPS program
Requirements:
Industrial Engineer capabilities & process orientation
Project management skills for leading cross OPS projects
Technical Systems&Tool’s fast learning capabilities
Strong integration skills between PDC teams
Problem solving, conflict management, communication, presentation and team skills
5. Physics Student
PD, Hiring Manager: Tal Kuzniz
Working in a free space optical lab
Responsibility over planning and executing lab experiments using automated and controlled
systems
Job requirements
• BSc/MSc Physics student / dual major that includes physics, from a known university
• At least 1 year remaining till graduation
• Availability of at least 22 hours a week
• Experience in optical lab work - an advantage
• Experience in LabView programming - an advantage
6. Algorithms Team Leader / Group Manager
PD
Hiring Managers : Boaz Cohen
B.Sc. in EE / CS / Physics / Math. / other related technical field.
M.Sc. / Ph.D. - Advantage
Strong technical Image Proc. / Computer Vision background .
5 years of IP / CV alg. development experience.
Management experience from the industry.
7. Spares Senior NPI planner
Hiring Manager : Rachel Zor
Responsible for Spares NPI availability performance and stocking budget
Define & Implement product stocking strategy through collaboration with PDC PS and AGS functions
Communicate stocking plan to key customers and management within PDC & field
Manage product spares performance and leads improvement plans as needed
Manages inventory budget and reserves
Skills:
Good analytical skills
Cross functional l/ Multi cultural leading capabilities
Familiarity with PDC products and organization - Advantage
Ability to perform in dynamic and high uncertain environment
2-4 years in similar environment
8. Application Develop Integrative Solutions
Hiring Manager: Guy Berliner
Job Description:
Own Application develop part in Integrative Solutions projects: CAD based recipe
creation, Nuisance filtering, accurate navigation, and results analysis.
Work tightly with customer to identify and learn CAD based solutions.
Work with PD and PL to define integrative solutions road map.
Requirements:
Strong background with Inspection and Review application/ application
development.
Experience with working with PD.
Capable of working with customer and account.
9. System Engineer for SEM DR
PD
Hiring Manager: Yuval Gronau
High level, multidisciplinary system view including electron
physics, optics, electronics, algorithms and software
Electrical engineering or physics B.Sc. and M.Sc.
Hands on capabilities (working on the tool)
Ability to independently research and solve problems, going into the fine details
Highly motivational
Willing to fly abroad about once a quarter
10. OI System Design Engineer
Hiring Manager: Lior Dotan, Yariv Simovitch
Job Description:
Design highly complex systems & define system requirements
Lead multidisciplinary subsystem R&D
Perform complex experiments to understand system limitations
Troubleshoot and provide solutions to a wide range of difficult problems
Requirements:
BSc in Electrical Engineering / Physics / similar & 5+ year relevant experience
MSc in Electrical Engineering / Physics / similar & 3+ year relevant experience – advantage
Strong analytical skills, good problem solving skills
Able to lead projects with multiple interfaces, independent , good interpersonal skills
Creative & curious
11. Matlab Developer
PD
Hiring Manager : Lior Cohen
BSc in Electrical Eng. / Computer Science / Physics / Mathematics or
related technical discipline.
High Matlab programming skills - Must.
Background in Image Processing and data analysis.
Wide System View.
At least 2 years related experience.
SW Engineering skills & background is a plus.
12. Mechanical Engineer
PD
Hiring Manager: Erez Admoni
BSc/ MSc in Mechanical Engineering
>3 years relevant experience in the design of mechanical system assemblies.
Advantage to design experience of multi-disciplinary systems combining
optics, electronics and accurate mechanisms.
Technical and analytical capabilities with high self-learning abilities.
Ability to work in a dynamic and changing environment.