Fiber optic communication has seen widespread adoption due to the ability to transmit large amounts of data over long distances with low latency. Optical fibers can carry hundreds of thousands of telephone channels using only a small part of the theoretical capacity. Over generations, transmission capacity per fiber has increased enormously from 45 megabits per second to over 100 gigabits per second currently. Future trends include multi-terabit networks using dense wavelength division multiplexing, ultra-long haul transmission to cancel dispersion effects, and improvements to erbium-doped fiber amplifiers and other technologies.
Fiber optic systems are important telecommunication
infrastructure for world-wide broadband networks. Wide
bandwidth signal transmission with low delay is a key
requirement in present day applications. Optical fibers provide
enormous and unsurpassed transmission bandwidth with
negligible latency, and are now the transmission medium of
choice for long distance and high data rate transmission in
telecommunication networks.
FUTURE TRENDS IN FIBER OPTICS COMMUNICATIONIJCI JOURNAL
Fiber optic systems are vital media transmission foundation for overall broadband systems. Wide data transfer capacity (bandwidth) signal transmission with low delay is a key prerequisite in present day applications. Optical fiber give broad and incomparable transmission transfer speed with insignificant expectations, and are currently the transmission medium of decision for long separation and high information rate transmission in media transmission systems. This paper gives a review of fiber optic communication system, including their key advances, and furthermore talks about their mechanical pattern towards the next generation.
Garth naar - optical fibre communication telecommunicationsgarthnaar
Fibre optic communication has revolutionised the telecommunications industry. It has also made its presence widely felt within the data networking community as well. Using fibre optic cable, optical communications have enabled telecommunications links to be made over much greater distances and with much lower levels of loss in the transmission medium and possibly most important of all, fiber optical communications has enabled much higher data rates to be accommodated.
Fiber optic systems are important telecommunication
infrastructure for world-wide broadband networks. Wide
bandwidth signal transmission with low delay is a key
requirement in present day applications. Optical fibers provide
enormous and unsurpassed transmission bandwidth with
negligible latency, and are now the transmission medium of
choice for long distance and high data rate transmission in
telecommunication networks.
FUTURE TRENDS IN FIBER OPTICS COMMUNICATIONIJCI JOURNAL
Fiber optic systems are vital media transmission foundation for overall broadband systems. Wide data transfer capacity (bandwidth) signal transmission with low delay is a key prerequisite in present day applications. Optical fiber give broad and incomparable transmission transfer speed with insignificant expectations, and are currently the transmission medium of decision for long separation and high information rate transmission in media transmission systems. This paper gives a review of fiber optic communication system, including their key advances, and furthermore talks about their mechanical pattern towards the next generation.
Garth naar - optical fibre communication telecommunicationsgarthnaar
Fibre optic communication has revolutionised the telecommunications industry. It has also made its presence widely felt within the data networking community as well. Using fibre optic cable, optical communications have enabled telecommunications links to be made over much greater distances and with much lower levels of loss in the transmission medium and possibly most important of all, fiber optical communications has enabled much higher data rates to be accommodated.
Instructions you are to read the assigned paper and prep.docxjaggernaoma
Instructions::::
you are to read the assigned paper and prepare the following:
· Summary (2 pages, 11 font size, double space)
· Discuss space-division multiplexing
· What it is
· The feasibility and potential future direction
· Implication of Shannon’s theorem in the achievement of high bit rate
· What can be considered the best technology for higher bit rate in optical fiber?
10 C O M M U N I C AT I O N S O F T H E A C M | O C T O B E R 2 0 1 6 | V O L . 5 9 | N O . 1 0
news
I
M
A
G
E
B
Y
J
A
M
A
N
I
C
A
I
L
L
E
T
/E
P
F
L
news
N
tens of kilometers before it must be de-
tected and retransmitted. In ensuing
years the bit rate increased steadily,
driven both by faster transmitters and
receivers and by fiber designs that min-
imized the spread of the pulses.
As the pace of improvements began
to slow, researchers realized they could
send more information through fiber
by combining light of slightly differ-
ent wavelengths, each carrying its own
S
I N C E O P T I C A L F I B E R S were
first deployed for commu-
nications in the 1970s, the
number of bits per second
a single fiber can carry has
grown by the astonishing factor of 10
million, permitting an enormous in-
crease in total data traffic, including
cellular phone calls that spend most of
their lives as bits traveling in fiber.
The exponential growth resembles
Moore’s Law for integrated circuits.
Technology journalist Jeff Hecht has
proposed calling the fiber version
“Keck’s Law” after Corning researcher
Donald Keck, whose improvements in
glass transparency in the early 1970s
helped launch the revolution. The sim-
plicity of these “laws,” however, ob-
scures the repeated waves of innovation
that sustain them, and both laws seem
to be approaching fundamental limits.
Fiber researchers have some cards to
play, though. Moreover, if necessary the
industry can install more fibers, similar
to the way multiple processors took the
pressure off saturating clock rates.
However, the new solutions may not
yield the same energy and cost savings
that have helped finance the telecom-
munication explosion.
Optical fiber became practical when
researchers learned how to purify ma-
terials and fabricate fibers with extraor-
dinary transparency, by embedding
a higher refractive-index core to trap
the light deep within a much larger
cladding. Subsequent improvements
reduced losses to their current levels,
about 0.2 dB/km for light wavelengths
(infrared “colors”) near 1.55 μm. A la-
ser beam that is turned on and off to
encode bits can transmit voice or data
Optical Fibers
Getting Full
Exploring ways to push more data through
a fiber one-tenth the thickness of the average human hair.
Science | DOI:10.1145/2983268 Don Monroe
http://dx.doi.org/10.1145/2983268
O C T O B E R 2 0 1 6 | V O L . 5 9 | N O . 1 0 | C O M M U N I C AT I O N S O F T H E A C M 11
news
Nonlinear Shannon L.
Fiber type and corresponding optical transceiversAngelina Li
Fiber optic patch cable as the basic element of a network, transmits signals through strands of glass or plastic fiber. Fiber optic cables are available in multimode and single-mode fibers terminated with LC, SC, ST, LC, FC, MTRJ, E2000 connectors in simplex and duplex. The typical multimode fiber used in telecom or datacom applications has a core size of 50 or 62.5 microns. Single-mode fiber shrinks the core size down to 9 microns so that the light can only travel in one ray.
Integrated Optical Wireless Network For Next Generation Wireless SystemsCSCJournals
Next generation wireless networks need to support broadband wireless services at significantly reduced cost. The existing wireless systems can hardly provide transmission capacity of the order of few Mbps. However, millimeter waves and optical fiber can provide data capacity of the order of Gbps and Tbps respectively. Hence the requirements of broadband wireless system can be achieved through the integration of optical fiber and millimeter wireless systems. We suggest modified millimeter wireless system, with optical fiber as feeder network. Simulations have been carried out for AWGN and optical fiber channels using MATLAB code, so as to compare their individual performance. When compared it is observed that the performance of multimode optical fiber (MMOF) link even for distance of 80 KM is better than that of the AWGN channel with SNR of 50 dB and above. Hence, an integrated fiber radio network is an excellent cost effective media for higher data rate (>100Mbps).
Newly Proposed Multi Channel Fiber Optic Cable CoreYogeshIJTSRD
Fiber optic cables have single core and multiple core options, but single and multiple core fiber cable -˜s core design need to be updated. Newly proposed design gives facilities to multiple usage than traditional design of cable core. Cable core design needs improvement by using present technology for decreasing material and cost and by improving efficiency of cable. Research need to be carried out in this direction. What do you think Natvarbhai Prabhudas Gajjar "Newly Proposed Multi Channel Fiber-Optic Cable Core" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45116.pdf Paper URL: https://www.ijtsrd.com/engineering/other/45116/newly-proposed-multi-channel-fiberoptic-cable-core/natvarbhai-prabhudas-gajjar
This paper deals with different loss mechanisms within the single mode fiber (SMF) in optical fiber communication. A number of mechanisms are responsible for the signal attenuation within optical fibers. As the optical signal propagates over long stretch of fiber, it becomes attenuated because of absorption,
scattering, fiber bends by material impurities, and other effects. The transmission using high bandwidth
can handle vast amounts of information, which can be further improved by reduction in fiber losses,
increase in data rates and distances, and using appropriate operating wavelength in optical fiber communication. The recent development in the area of fiber optic communication as well as the advances in different fiber types and their properties such as attenuation or loss and bandwidth are also discussed in this paper. The performance improvement of the proposed different loss, such as Rayleigh scattering, Stimulated Brillouin Scattering (SBS), Stimulated Raman Scattering (SRS), and bending loss within the various loss mechanisms in fiber optic communication is shown through simulations.
Optical communication, also known as optical telecommunication, is communication at a distance using light to carry information. It can be performed visually or by using electronic devices. The earliest basic forms of optical communication date back several millennia, while the earliest electrical device created to do so was the photophone, invented in 1880.
An optical communication system uses a transmitter, which encodes a message into an optical signal, a channel, which carries the signal to its destination, and a receiver, which reproduces the message from the received optical signal. When electronic equipment is not employed the 'receiver' is a person visually observing and interpreting a signal, which may be either simple (such as the presence of a beacon fire) or complex (such as lights using color codes or flashed in a Morse code sequence).
Modern communication relies on optical networking systems using optical fiber, optical amplifiers, lasers, switches, routers, and other related technologies. Free-space optical communication use lasers to transmit signals in space, while terrestrial forms are naturally limited by geography and weather. This article provides a basic introduction to different forms of optical communication.
Visual forms
Visual techniques such as smoke signals, beacon fires, hydraulic telegraphs, ship flags and semaphore lines were the earliest forms of optical communication.[1][2][3][4] Hydraulic telegraph semaphores date back to the 4th century BCE Greece. Distress flares are still used by mariners in emergencies, while lighthouses and navigation lights are used to communicate navigation hazards.
The heliograph uses a mirror to reflect sunlight to a distant observer.[5] When a signaler tilts the mirror to reflect sunlight, the distant observer sees flashes of light that can be used to transmit a prearranged signaling code. Naval ships often use signal lamps and Morse code in a similar way.
Aircraft pilots often use visual approach slope indicator (VASI) projected light systems to land safely, especially at night. Military aircraft landing on an aircraft carrier use a similar system to land correctly on a carrier deck. The coloured light system communicates the aircraft's height relative to a standard landing glideslope. As well, airport control towers still use Aldis lamps to transmit instructions to aircraft whose radios have failed.
Instructions you are to read the assigned paper and prep.docxjaggernaoma
Instructions::::
you are to read the assigned paper and prepare the following:
· Summary (2 pages, 11 font size, double space)
· Discuss space-division multiplexing
· What it is
· The feasibility and potential future direction
· Implication of Shannon’s theorem in the achievement of high bit rate
· What can be considered the best technology for higher bit rate in optical fiber?
10 C O M M U N I C AT I O N S O F T H E A C M | O C T O B E R 2 0 1 6 | V O L . 5 9 | N O . 1 0
news
I
M
A
G
E
B
Y
J
A
M
A
N
I
C
A
I
L
L
E
T
/E
P
F
L
news
N
tens of kilometers before it must be de-
tected and retransmitted. In ensuing
years the bit rate increased steadily,
driven both by faster transmitters and
receivers and by fiber designs that min-
imized the spread of the pulses.
As the pace of improvements began
to slow, researchers realized they could
send more information through fiber
by combining light of slightly differ-
ent wavelengths, each carrying its own
S
I N C E O P T I C A L F I B E R S were
first deployed for commu-
nications in the 1970s, the
number of bits per second
a single fiber can carry has
grown by the astonishing factor of 10
million, permitting an enormous in-
crease in total data traffic, including
cellular phone calls that spend most of
their lives as bits traveling in fiber.
The exponential growth resembles
Moore’s Law for integrated circuits.
Technology journalist Jeff Hecht has
proposed calling the fiber version
“Keck’s Law” after Corning researcher
Donald Keck, whose improvements in
glass transparency in the early 1970s
helped launch the revolution. The sim-
plicity of these “laws,” however, ob-
scures the repeated waves of innovation
that sustain them, and both laws seem
to be approaching fundamental limits.
Fiber researchers have some cards to
play, though. Moreover, if necessary the
industry can install more fibers, similar
to the way multiple processors took the
pressure off saturating clock rates.
However, the new solutions may not
yield the same energy and cost savings
that have helped finance the telecom-
munication explosion.
Optical fiber became practical when
researchers learned how to purify ma-
terials and fabricate fibers with extraor-
dinary transparency, by embedding
a higher refractive-index core to trap
the light deep within a much larger
cladding. Subsequent improvements
reduced losses to their current levels,
about 0.2 dB/km for light wavelengths
(infrared “colors”) near 1.55 μm. A la-
ser beam that is turned on and off to
encode bits can transmit voice or data
Optical Fibers
Getting Full
Exploring ways to push more data through
a fiber one-tenth the thickness of the average human hair.
Science | DOI:10.1145/2983268 Don Monroe
http://dx.doi.org/10.1145/2983268
O C T O B E R 2 0 1 6 | V O L . 5 9 | N O . 1 0 | C O M M U N I C AT I O N S O F T H E A C M 11
news
Nonlinear Shannon L.
Fiber type and corresponding optical transceiversAngelina Li
Fiber optic patch cable as the basic element of a network, transmits signals through strands of glass or plastic fiber. Fiber optic cables are available in multimode and single-mode fibers terminated with LC, SC, ST, LC, FC, MTRJ, E2000 connectors in simplex and duplex. The typical multimode fiber used in telecom or datacom applications has a core size of 50 or 62.5 microns. Single-mode fiber shrinks the core size down to 9 microns so that the light can only travel in one ray.
Integrated Optical Wireless Network For Next Generation Wireless SystemsCSCJournals
Next generation wireless networks need to support broadband wireless services at significantly reduced cost. The existing wireless systems can hardly provide transmission capacity of the order of few Mbps. However, millimeter waves and optical fiber can provide data capacity of the order of Gbps and Tbps respectively. Hence the requirements of broadband wireless system can be achieved through the integration of optical fiber and millimeter wireless systems. We suggest modified millimeter wireless system, with optical fiber as feeder network. Simulations have been carried out for AWGN and optical fiber channels using MATLAB code, so as to compare their individual performance. When compared it is observed that the performance of multimode optical fiber (MMOF) link even for distance of 80 KM is better than that of the AWGN channel with SNR of 50 dB and above. Hence, an integrated fiber radio network is an excellent cost effective media for higher data rate (>100Mbps).
Newly Proposed Multi Channel Fiber Optic Cable CoreYogeshIJTSRD
Fiber optic cables have single core and multiple core options, but single and multiple core fiber cable -˜s core design need to be updated. Newly proposed design gives facilities to multiple usage than traditional design of cable core. Cable core design needs improvement by using present technology for decreasing material and cost and by improving efficiency of cable. Research need to be carried out in this direction. What do you think Natvarbhai Prabhudas Gajjar "Newly Proposed Multi Channel Fiber-Optic Cable Core" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45116.pdf Paper URL: https://www.ijtsrd.com/engineering/other/45116/newly-proposed-multi-channel-fiberoptic-cable-core/natvarbhai-prabhudas-gajjar
This paper deals with different loss mechanisms within the single mode fiber (SMF) in optical fiber communication. A number of mechanisms are responsible for the signal attenuation within optical fibers. As the optical signal propagates over long stretch of fiber, it becomes attenuated because of absorption,
scattering, fiber bends by material impurities, and other effects. The transmission using high bandwidth
can handle vast amounts of information, which can be further improved by reduction in fiber losses,
increase in data rates and distances, and using appropriate operating wavelength in optical fiber communication. The recent development in the area of fiber optic communication as well as the advances in different fiber types and their properties such as attenuation or loss and bandwidth are also discussed in this paper. The performance improvement of the proposed different loss, such as Rayleigh scattering, Stimulated Brillouin Scattering (SBS), Stimulated Raman Scattering (SRS), and bending loss within the various loss mechanisms in fiber optic communication is shown through simulations.
Similar to APPLICATIONS OF OPTICAL COMMUNICATION.docx (20)
Optical communication, also known as optical telecommunication, is communication at a distance using light to carry information. It can be performed visually or by using electronic devices. The earliest basic forms of optical communication date back several millennia, while the earliest electrical device created to do so was the photophone, invented in 1880.
An optical communication system uses a transmitter, which encodes a message into an optical signal, a channel, which carries the signal to its destination, and a receiver, which reproduces the message from the received optical signal. When electronic equipment is not employed the 'receiver' is a person visually observing and interpreting a signal, which may be either simple (such as the presence of a beacon fire) or complex (such as lights using color codes or flashed in a Morse code sequence).
Modern communication relies on optical networking systems using optical fiber, optical amplifiers, lasers, switches, routers, and other related technologies. Free-space optical communication use lasers to transmit signals in space, while terrestrial forms are naturally limited by geography and weather. This article provides a basic introduction to different forms of optical communication.
Visual forms
Visual techniques such as smoke signals, beacon fires, hydraulic telegraphs, ship flags and semaphore lines were the earliest forms of optical communication.[1][2][3][4] Hydraulic telegraph semaphores date back to the 4th century BCE Greece. Distress flares are still used by mariners in emergencies, while lighthouses and navigation lights are used to communicate navigation hazards.
The heliograph uses a mirror to reflect sunlight to a distant observer.[5] When a signaler tilts the mirror to reflect sunlight, the distant observer sees flashes of light that can be used to transmit a prearranged signaling code. Naval ships often use signal lamps and Morse code in a similar way.
Aircraft pilots often use visual approach slope indicator (VASI) projected light systems to land safely, especially at night. Military aircraft landing on an aircraft carrier use a similar system to land correctly on a carrier deck. The coloured light system communicates the aircraft's height relative to a standard landing glideslope. As well, airport control towers still use Aldis lamps to transmit instructions to aircraft whose radios have failed.
Multi-cluster Kubernetes Networking- Patterns, Projects and GuidelinesSanjeev Rampal
Talk presented at Kubernetes Community Day, New York, May 2024.
Technical summary of Multi-Cluster Kubernetes Networking architectures with focus on 4 key topics.
1) Key patterns for Multi-cluster architectures
2) Architectural comparison of several OSS/ CNCF projects to address these patterns
3) Evolution trends for the APIs of these projects
4) Some design recommendations & guidelines for adopting/ deploying these solutions.
This 7-second Brain Wave Ritual Attracts Money To You.!nirahealhty
Discover the power of a simple 7-second brain wave ritual that can attract wealth and abundance into your life. By tapping into specific brain frequencies, this technique helps you manifest financial success effortlessly. Ready to transform your financial future? Try this powerful ritual and start attracting money today!
1.Wireless Communication System_Wireless communication is a broad term that i...JeyaPerumal1
Wireless communication involves the transmission of information over a distance without the help of wires, cables or any other forms of electrical conductors.
Wireless communication is a broad term that incorporates all procedures and forms of connecting and communicating between two or more devices using a wireless signal through wireless communication technologies and devices.
Features of Wireless Communication
The evolution of wireless technology has brought many advancements with its effective features.
The transmitted distance can be anywhere between a few meters (for example, a television's remote control) and thousands of kilometers (for example, radio communication).
Wireless communication can be used for cellular telephony, wireless access to the internet, wireless home networking, and so on.
ER(Entity Relationship) Diagram for online shopping - TAEHimani415946
https://bit.ly/3KACoyV
The ER diagram for the project is the foundation for the building of the database of the project. The properties, datatypes, and attributes are defined by the ER diagram.
test test test test testtest test testtest test testtest test testtest test ...
APPLICATIONS OF OPTICAL COMMUNICATION.docx
1. APPLICATIONS OF OPTICAL COMMUNICATION
OPTICAL COMMUNICATION IN TELECOMMUNICATION & FIBER OPTIC INFRASTRUCTURE
CASE STUDY:
ABSTRACT
Technology is often the mother of science. In the world of telecommunication fiber optic
infrastructure has world- wide demand. They key requirement in today’s world is wide
bandwidth signal transmission with low delay. By the using optical fiber system we can
provide enormous and unsurpassed transmission bandwidth with negligible latency. In this
paper we will discuss the past, present and future aspects of fiber optics. We also discuss
upcoming impact on next generation.
INTRODUCTION:
*Fiber optics is the peer invention done by Narender Singh Kapany and Charles K. Kao. Fibre
optics’s rapidly increasing consumer and commercial demand is the only driven force for the
wide spread of it in whole world. By the help of this technology we can convey more data
through a single optical fiber over a long distances. By the help of dispersion management
we can improved the transmission capacity of the optical fiber. Optic fiber system largely
replaced the radio transmission system. It is widely used for telephony, internet traffic, LANs
, cable T.V etc. In optical Fiber a single silica fiber can carry hundreds of thousands of
telephone channels, utilizing only a small part of the theoretical capacity.
*Day by day so many new technologies emerging such as CDMA , GSM, Wi-Max,etc. Within
the last 30 years, the transmission capacity of optical fibers has been increased enormously.
The rise in available transmission bandwidth per fiber is even significantly faster than e.g.
the increase in storage capacity of electronic memory chips, or in the increase in
computation power of microprocessors.
*The transmission capacity of a fiber depends on the fiber length. The longer a fiber is, the
more detrimental certain effects such intermodal orchromatic dispersion are, and the lower
is the achievable transmission rate. For short distances of a few hundred meters or less (e.g.
within storage area networks), it is often more convenient to utilize multimode fibers, as
these are cheaper to install (for example, due to their large core areas, they are easier to
splice). Depending on the transmitter technology and fiber length, they achieve data rates
between a few hundred Mbit/s and ≈ 10 Gbit/s.
Single-mode fibers are typically used for longer distances of a few kilometers or
more. Currently used commercial telecom systems typically transmit 10 Gbit/s or 40
Gbit/s per data channel over distances of ten kilometers or more. The newest
available systems (as of 2014) reach 100 Gbit/s, and future systems may use higher
data rates per channel of e.g. 160 Gbit/s. The required total capacity is usually
2. obtained by transmitting many channels with slightly different wavelengths through
fibers; this is called wavelength division multiplexing (WDM).
BASIC PRINCIPLES OF FIBER OPTICS:
COMMUNICATION:
Communication Fiber optic communication is a communication technology that uses
light pulses to transfer information from one point to another through an optical
fiber. The information transmitted is essentially digital information generated by
telephone systems, cable television companies, and computer systems. An optical
fiber is a dielectric cylindrical waveguide made from low-loss materials, usually
silicon dioxide. The core of the waveguide has a refractive index a little higher than
that of the outer medium (cladding), so that light pulses is guided along the axis of
the fiber by total internal reflection .
Optical fibers fall into two major categories, namely: step index optical fiber, which
include single mode optical fiber and multimode optical fiber, and graded index
optical fiber. Single mode step index optical fiber has a core diameter less than 10
micrometers and only allows one light path. Multimode step index optical fiber has a
core diameter greater than or equal to 50 micrometers and allows several light
paths, this leads to modal dispersion.
Graded index optical fibers have their core refractive index gradually decrease
farther from the centre of the core, this increased refraction at the core centre slows
the speed of some light rays, thereby allowing all the light rays to reach the receiver
at almost the same time, thereby reducing dispersion. Figure 2 Gives a Description of
the Various Optical Fiber Modes
3. EVOLUTION OF FIBER OPTICS:
*Optical fiber was first developed in 1970 by Corning Glass Works. At the same time, GaAs
semiconductor lasers were also developed for transmitting light through the fiber optic
cables. The first generation fiber optic system was developed in 1975, it used GaAs
semiconductor lasers, operated at a wavelength of 0.8 µm, and bit rate of
45Megabits/second with 10Km repeater spacing.
*In the early 1980’s, the second generation of fiber optic communication was developed, it
used InGaAsP semi conductor lasers and operated at a wavelength of 1.3 µm. By 1987,
these fiber optic systems were operating at bit rates of up to 1.7 Gigabits/second on single
mode fiber with 50Km repeater spacing.
*The third generation of fiber optic communication operating at a wavelength of 1.55 µm
was developed in 1990. These systems were operating at a bit rate of up to 2.5
Gigabits/second on a single longitudinal mode fiber with 100Km repeater spacing.
*The fourth generation of fiber optic systems made use of optical amplifiers as a
replacement for repeaters, and utilized wavelength division multiplexing (WDM) to increase
data rates. By 1996, transmission of over 11,300Km at a data rate of 5Gigabits/second had
been demonstrated using submarine cables [7]. The fifth generation fiber optic
communication systems use the Dense Wave Division Multiplexing (DWDM) to further
increase data rates. Also, the concept of optical solitons, which are pulses that can preserve
their shape by counteracting the negative effects of dispersion, is also being explored.
4. FUTURE TRENDS IN FIBER OPTICS:
Multi – Terabit Optical Networks:
* Dense Wave Division Multiplexing (DWDM) paves the way for multi-terabit transmission.
The world-wide need for increased bandwidth availability has led to the interest in
developing multi-terabit optical networks. Presently, four terabit networks using 40Gb/s
data rate combined with 100 DWDM channels exists. Researchers are looking at achieving
even higher bandwidth with 100Gb/s. With the continuous reduction in the cost of fiber
optic components, the availability of much greater bandwidth in the future is possible.
Ultra – Long Haul Optical Transmission:
*In the area of ultra-long haul optical transmission, the limitations imposed due to
imperfections in the transmission medium are subject for research. Cancellation of
dispersion effect has prompted researchers to study the potential benefits of soliton
propagation. More understanding of the interactions between the electromagnetic light
wave and the transmission medium is necessary to proceed towards an infrastructure with
the most favorable conditions for a light pulse to propagate .
Laser Neural Network Nodes:
* The laser neural network is an effective option for the realization of optical network
nodes. A dedicated hardware configuration working in the optical domain and the use of
ultra-fast photonic sections is expected to further improve the capacity and speed of
telecommunication networks [12]. As optical networks become more complex in the future,
the use of optical laser neural nodes can be an effective solution.
Advancement in Network Configuration of Optical:
5. Submarine Systems:
* In order to improve the flexibility of network configuration in optical submarine
communication systems, it is expected that the development of a technology for configuring
the mesh network will be a step in the right direction. As shown in figure 5, while a ring
network joins stations along a single ring, a mesh network connects stations directly.
Presently, most large scale optical submarine systems adopt the ring configuration. By
adopting the optical add/drop multiplexing technology that branches signals in the
wavelength domain, it is possible to realize mesh network configuration that directly inter-
connects the stations. Research is ongoing, and in the future such network configuration will
be common.
Improvement in Optical Amplification Technology
*Erbium Doped Fiber Amplifier (EDFA) is one of the critical technologies used in optical fiber
communication systems. In the future, better technologies to enhance EDFA performance
will be developed. In order to increase the gain bandwidth of EDFA, better gain equalization
technology for high accuracy optical amplification will be developed. Also, in order to
achieve a higher output power, and a lower noise figure, high power pumping lasers that
possess excellent optical amplification characteristics with outputs of more than +20dBm,
and very low noise figure are envisioned to exist in the nearest future.
High – Altitude Platforms
*Presently, optical inter satellite links and orbit-to-ground links exists , the latter suffering
from unfavorable weather conditions . Current research explores optical communication to
and from high altitude platforms. High altitude platforms are airships situated above the
clouds at heights of 16 to 25Km, where the unfavorable atmospheric impact on a laser beam
is less severe than directly above the ground . optical links between high-altitude platforms,
satellites and ground stations are expected to serve as broadband back-haul communication
channels, if a high-altitude platform functions as a data relay station.
6. Improvement in WDM Technology
* Research is ongoing on how to extend the wavelength range over which wave division
multiplexing systems can operate. Presently, the wavelength window (C band) ranges from
1.53-1.57µm. Dry fiber which has a low loss window promises an extension of the range to
1.30 – 1.65 µm. Also, developments in optical filtering technology for wave division
multiplexing are envisioned in the future.
Improvements in Glass Fiber Design and Component
* Miniaturization Presently, various impurities are added or removed from the glass fiber to
change its light transmitting characteristics. The result is that the speed with which light
passes along a glass fiber can be controlled, thus allowing for the production of customized
glass fibers to meet the specific traffic engineering requirement of a given route. This trend
is anticipated to continue in the future, in order to produce more reliable and effective glass
fibers. Also, the miniaturization of optical fiber communication components is another trend
that is most likely to continue in the future.
CONCLUSION:
* Optical Communication industry is an ever demanding one, the growth experienced by the
industry has been enormous this past decade. Recently we have so many fields where
optical communication is showing outstanding performance. There is still much work to be
done to support the need for faster data rates, advanced switching techniques and more
intelligent network architectures that can automatically change dynamically in response to
traffic patterns and at the same time be cost efficient. The trend is expected to continue in
the future as breakthroughs already attained in the laboratory will be extended to practical
deployment thereby leading to a new generation in fiber optics communications.