Anshika Jhamb is a current student at IIT (BHU) studying Metallurgical Engineering with a focus on corrosion, electrometallurgy, metallographic techniques, and mechanical metallurgy. She has work experience in failure analysis, corrosion studies, and foundry metallurgy from internships at BARC and TATA Motors. Anshika seeks a challenging role that utilizes her technical skills and allows for professional growth. She has strong academic performance and extracurricular involvement in activities, events, and social initiatives.

1. ANSHIKA JHAMB
AREAS OF INTEREST:
 CORROSION, ELECTROMETALLURGY , METALLOGRAPHIC TECHNIQUES,
MECHANICAL METALLURGY & FAILURE ANALYSIS
 INSTRUMENTAL ANALYSIS (XRF, XRD, EPMA, XPS, EDX, WDX, AES)
 MICROSCOPIC CHARACTERISATION (OPTICAL MICROSCOPE,
STEREOMICROSCOPE, SCANNING AND TRANSMISSION ELECTRON
MICROSCOPY)
 PHYSICAL METALLURGY , PHASE TRANSFORMATIONS AND ALLOY
DESIGNING
 EXTRACTIVE METALLURGY
 FOUNDRY METALLURGY & FUELS AND REFRACTORIES
 CODING ( C & C++ , MICROSOFT WINDOWS & LINUX OS)
Underlined fields are those that were utilized during my three summer
internships .
OBJECTIVE
 To work in a mentally challenging and intellectually stimulating environment that offers avenues for growth,
utilizes my technical skills, intelligence & hard work. I assure that I can work with less supervision and training, am
hard working, versatile and will do my job with utmost sincerity and accuracy in least possible time, leading to the
overall development of the company as well as the society with the use of my innovative ideas.
EDUCATION
Indian Institute of Technology (BHU), Varanasi Aug 2015 – Current
 B. Tech. (Undergraduate Degree) in Metallurgical Engineering (Current CGPA: 8.6)
Semester I II III IV V VI VII VII
SGPA 7.94 6.81 9.65 9.19 8.87 8.83 - -
YGPA 7.375 9.42 8.85 -
KPC College, Kharghar, Mumbai 2011
 Maharashtra State Board Higher Secondary Examination (Percentage: 81.5%)
Atomic Energy Central School, BARC, Mumbai 2009
 Central Board Secondary Examination (Percentage: 96.6%)
HOBBIES AND SKILLS
HOBBIES:
Art and Craft, all sorts of creative works, Decoration & Designing, all kinds of sports activities, C programming, reading
books, interested in all kinds of technical stuff.
SKILLS:
 Computer Programming
 Microsoft Office and other softwares
 Linguistic skills
(+91)8765160673
anshika.jhamb.met12@itbhu.ac.in
anshika.jhamb@gmail.com

2. TECHNICAL EXPERIENCE
 I worked as a summer intern in B.A.R.C (Bhabha Atomic Research Center) on “Failure analysis of Stainless Steel
pipe (316L) exposed to H2S environment”, under the guidance of Dr. Geoggy Jiju Abraham, Scientific Officer
Corrosion Science Division, MSD, BARC; Dr. V.Kain, Head Corrosion Science Division, MSD, BARC and Dr. G.K Dey,
head Material Science Division(MSD), BARC, right after my 1st year of B.Tech. I used techniques such as sample
preparation using metallographic techniques, microscopic observations of crack profile and grain size, mechanical
testing, chemical analysis, XRF and ferrite measurement to detect the actual cause, type and profile of corrosion.
I was appreciated and recommended by Dr.V.Kain , Head of Corrosion Science Section, MSD (Material Science
Division) , BARC for my excellent work.
 I worked in great detail on “Corrosion of Ferritic Martensitic Steels & Indian RAFMS in Lead Lithium Eutectic” At
BARC under the guidance of Mrs. Poulami Chakrabarty, Scientific officer, FRMS,BARC and Dr. Krishnamurthy, Head
FRMS(fusion research material science) division , BARC after my 2nd year B.Tech. This project was related to ITER
(International Thermonuclear Experimental Reactor). (abstract understated)
ABSTRACT:
Nuclear fusion has provided a solution to the world power crisis. Lead Lithium Ceramic Breeder TBM has been
proposed by India to be tested in ITER. However, the structural material is RAFMS. So, we need to test the
compatibility of RAFMS with Pb-Li eutectic at high temperature in the presence of magnetic fields.
So, we have carried analysis of samples from forced circulation Pb-17Li loop operating at 600rpm for 500hrs at
5500C & also heat treated samples at 5500C for 500hrs using microscopic analysis, mechanical testing , chemical
analysis, XRD. We have also derived a relationship between pump speed & fluid velocity as well as flow rate using
theories of electromagnetism , fluid dynamics and flowmeter concepts. Furthermore, we have commissioned a
set-up to analyze the effect of magnetic fields on corrosion of Indian RAFMS by Pb-17Li eutectic.
We have observed that heat treatment leads to weakening of the material that is further assisted by corrosion due
to flowing Pb-17Li eutectic. Also, a coating is developed on the surface, but unfortunately, this coating is too fragile
& brittle to prevent corrosion & corrosion continuous & material deteriorates with time.
However, thermal effects are in majority as compared to the effects of corrosion by Pb-17Li eutectic.
 I worked on “Effect of cooling rate on metallurgical and mechanical properties of 6BT block castings” at TATA
Motors Limited, Jamshedpur under the guidance of Mr. Brajesh Kumar Singh, Division Head, Production
Engineering, TML, Jamshedpur after my 3rd year B.Tech. This project was based on a keen study of techniques of
Foundary Metallurgy, characterization and testing of samples by various mechanical as well as microstructural
testing methods. After this project, my knowledge of Foundry Metallurgy and my interest in Automobile Sector
enhanced manifold.
Recommendations:
 Dr. V.Kain, Head, Corrosion Science Section, MSD (Material Science Division), BARC,
 Mumbai.
 Dr. Indrajit Chakrabarty, Associate Prof., Dept. of Metallurgical Engg. IIT(BHU), Varanasi.
 Dr. C.K.Behera, Asst. Professor , Dept. of Metallurgical Engg. IIT(BHU), Varanasi.
 Dr. Bratindranath Mukherjee, DST-Inspire Faculty, Dept. of Metallurgical Engg. IIT(BHU),
Varanasi.
 Mr. Brajesh Kumar Singh, Divisional Head, Production Engineering, TATA Motors Ltd., Jamshedpur.
ACHIEVEMENTS / EXTRA CURRICULAR ACTIVITIES
 ACADEMIC:
 Right from school level, I have secured not less than third position in the class on merit basis.
 Participated and acquired excellent marks in science Olympiads, United Nations Examination, Talent Search
Examinations and several other National level examinations based on IQ, knowledge & linguistic skills.
 Secured first position in all the Atomic Energy Central Schools in B.A.R.C, Mumbai in 6th as well as 9th standard
examinations.

3.  Subject topper in maths, science & hindi in 10th standard examination at school level.
 Secured 2nd position in 11th and 1st in 12th examinations in my college.
 Amongst the top 1% students in Maharashtra State Board, 12th and offered scholarship.
 Cracked the prestigious IIT-JEE examination in general category with AIR-4899.
 Cracked the prestigious ISAT examination and was offered seat for B.Tech in physics in ISRO, Bangalore.
 Secured excellent marks in AIEEE & CET & BITSAT examinations.
 Currently, at the 6th position in Department of Metallurgical Engineering, IIT(BHU).
 Secured YGPA of 9.42 in 2nd year B.TECH and 1st position in a batch of 80 students.
 Reached the final level of the regional TATA CRUCIBLE QUIZ held at IIT(BHU),
Varanasi in which I was amongst top 6 teams of a total of 400 teams.
 Selected by the Department of Metallurgical Engineering , IIT(BHU) for tutorship and tutoring 2nd year
students from August 2015.
 EXTRA-CURRICUAR:
 Participated in several play, dance, music, elocution, speech, extempore, art and craft competitions at school level
and won many awards too.
 Formally learnt and qualified three levels of classical Hindustani Music.
 Good at managing events and have managed many events at school level as well as college level.
 I have been the class representative many a times & have excellent leadership qualities.
 Participated in several robotics related activities too.
 SPORTS:
 Good at badminton, swimming & table tennis.
 At school level, won several medals for athletics and badminton.
 SOCIAL INITIATIVE:
Right from childhood, I am associated with teaching poor children . With the support of
IIT(BHU), Varanasi, I have managed to ensure sanitary health for poor women thereby spreading awareness
amongst them and providing them sanitary napkins free of cost to ensure women sanitary health in rural areas.
 ACTIVITIES ASSOCIATED WITH IIT(BHU):
 Currently, associated with BHU-MET news as a student editor
 Hostel node co-coordinator for ASQ activities for leadership excellence.
 Volunteered in NMD-ATM held at IIT(BHU) in November, 2014.
 Personality Traits:
I am a hard working individual dedicated to any work that is assigned to me. I have good communication, analytical
skills & linguistic skills (both English & Hindi). I am inquisitive, intelligent & keen to learn as well as discover new
things.
PERSONAL INFORMATION
 Father: Mr. Pradeep Kumar, B.E and M.E.
Currently Addnl. Chief Engineer (S.O.G) at
NPCIL, Mumbai.
 Mother: Mrs. Babita Jhamb, BSc,
B.Ed & Compute graduate. Currently
housewife.
 Gender: Female  Date of Birth: 20/11/1993
 Nationality: Indian
 Current Address: Room 6B, new extension, Gandhi
Smriti Girls Hostel, IIT (BHU), Varanasi – 221005.
 Languages: English, Hindi

4.  Permanent Address : Flat 7B, Kamet bldg, BARC colony
(near mankhurd), Mumbai-400094