11. Steps 1. Connect raspberry pi with monitor and connect Ethernet and USB port
to laptop.
2. Download and run android-things-setup-utility as administrator
3. Select your choice
i) Insert new image & configure wifi settings
ii) Configure wifi settings(if you already created & booted image)
1. Check device connected with wifi or not if not then connect it.
2. Connect device using command prompt by following command
(path: …Androidsdkplatform-tools )
adb connect <ip address>
1. Go to android studio and run the project on IOT device
14. Thank You!
Any questions?
You can find me at here
rahulvansh66@gmail.com
You can find this ppt in Slide Share
https://www.slideshare.net/RahulVansh1/
GitHub Code link
https://github.com/rahulvansh66/AndroidThings_Pi_Led_Blinking
:)