The all new ANALECT® RefinIR™ is a fully integrated laboratory autosampler and FTIR instrument. The RefinIR delivers automated spectral data acquisition of multiple liquid refinery stream samples from crude oils to blended gasoline and diesel.
The ABL90 FLEX analyzer from Radiometer provides blood gas and electrolyte results in just 35 seconds using small 65μL sample volumes. It has a small footprint making it suitable for point-of-care locations. Testing involves a simple 3-step process of scanning the barcode, aspirating the sample, and receiving results on the touchscreen in 35 seconds. The analyzer has features such as automatic sample mixing and quality control to ensure accuracy and regulatory compliance while providing time savings over other analyzers.
The AQT90 FLEX analyzer allows for quick and easy blood testing at the point of care. It can test for various parameters like troponin, CRP, and pregnancy markers from a single blood sample without any preparation. Test results are available within 30 seconds and the analyzer can run up to 30 tests per hour. It has a simple touchscreen interface and ensures accuracy equivalent to laboratory methods.
The document describes several flow meter divisions of RFI that represent different measurement technologies for industrial, municipal and commercial applications worldwide. It discusses the features and applications of various flow meter product lines from RFI divisions including Blancett, Dynasonics, Flo-tech, Hedland, Preso Meters, and Racine Vortex. These divisions offer flow meters for liquids, gases, steam and hydraulic fluids using technologies such as turbine, ultrasonic, magnetic, variable area, venturi, pitot tube, and vortex shedding.
We are manufacturers of Autoclaves, vertical autoclaves India since 1990. Our vertical autoclaves are widely used for day to day sterilization procedures and in various laboratory applications. For more information please log on http://cutt.us/wnr5
SELON HPLC System Introduction ( LC-100 & EX-1600 & EX-1700 )Mandy Yang
SELON new HPLC series, launched in 2018, we have chinese leading technology and economic price.We have infusion pumps, various detectors, manual sampler, automatic sampler, chromatographic column, etc.We can provide suitable configuration according to your different requirements.Please write to us for quotations.At the same time, we are very welcome you to visit our factory.We have own lab and an excellent team of engineers.Please don't hesitate to email us.
export2@selon-group.com
www.selon-group.com
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters according to standards like EN 779 and ASHRAE 52.2. The systems can test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable filter testing solutions at various throughput capacities.
The document describes the Hach Biotector B3500c TOC analyzer. It has patented two-stage advanced oxidation technology that provides maximum reliability and uptime of 99.8% in condensate applications. It requires only biannual calibration and reagent replenishment every six months, resulting in the lowest operating costs. The compact footprint saves on wall space while still allowing dual stream monitoring.
The ABL90 FLEX analyzer from Radiometer provides blood gas and electrolyte results in just 35 seconds using small 65μL sample volumes. It has a small footprint making it suitable for point-of-care locations. Testing involves a simple 3-step process of scanning the barcode, aspirating the sample, and receiving results on the touchscreen in 35 seconds. The analyzer has features such as automatic sample mixing and quality control to ensure accuracy and regulatory compliance while providing time savings over other analyzers.
The AQT90 FLEX analyzer allows for quick and easy blood testing at the point of care. It can test for various parameters like troponin, CRP, and pregnancy markers from a single blood sample without any preparation. Test results are available within 30 seconds and the analyzer can run up to 30 tests per hour. It has a simple touchscreen interface and ensures accuracy equivalent to laboratory methods.
The document describes several flow meter divisions of RFI that represent different measurement technologies for industrial, municipal and commercial applications worldwide. It discusses the features and applications of various flow meter product lines from RFI divisions including Blancett, Dynasonics, Flo-tech, Hedland, Preso Meters, and Racine Vortex. These divisions offer flow meters for liquids, gases, steam and hydraulic fluids using technologies such as turbine, ultrasonic, magnetic, variable area, venturi, pitot tube, and vortex shedding.
We are manufacturers of Autoclaves, vertical autoclaves India since 1990. Our vertical autoclaves are widely used for day to day sterilization procedures and in various laboratory applications. For more information please log on http://cutt.us/wnr5
SELON HPLC System Introduction ( LC-100 & EX-1600 & EX-1700 )Mandy Yang
SELON new HPLC series, launched in 2018, we have chinese leading technology and economic price.We have infusion pumps, various detectors, manual sampler, automatic sampler, chromatographic column, etc.We can provide suitable configuration according to your different requirements.Please write to us for quotations.At the same time, we are very welcome you to visit our factory.We have own lab and an excellent team of engineers.Please don't hesitate to email us.
export2@selon-group.com
www.selon-group.com
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters according to standards like EN 779 and ASHRAE 52.2. The systems can test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers customizable filter testing solutions at various throughput capacities.
The document describes the Hach Biotector B3500c TOC analyzer. It has patented two-stage advanced oxidation technology that provides maximum reliability and uptime of 99.8% in condensate applications. It requires only biannual calibration and reagent replenishment every six months, resulting in the lowest operating costs. The compact footprint saves on wall space while still allowing dual stream monitoring.
On-line, in-situ, and at-line monitoring of batch and continuous processes
Displays up to 15 properties at once and measures up to 30 properties per stream
Optical multiplexing capabilities provide analysis of up to 16 process streams using fiber optic or extractive stream switching
Utilizes process-proven ANALECT® Diamond 20™ Transept™ optical head
SpectraRTS™ software engineered exclusively for on-line monitoring, allowing use by engineers, maintenance personnel, and chemists
All ANALECT® lab and on-line systems share core optical technology, allowing instrument-to-instrument calibration transfers
We are manufacturers of Metabolic Shakers, Incubator shaker or orbital shakers in India since 1990. Our incubatorshakers are widely used for day to day bacteriological and varied laboratory applications requiring incubation aswell as shaking tests and procedures in variety of research and testing laboratories.For more information please log on http://cutt.us/3wtN
The document describes several gas monitoring devices:
- The 4 Channel Gas Monitor is a wall-mounted unit that monitors up to 4 toxic gases, combustible gases, or oxygen levels with displays and alarms.
- The Multichannel Gas Monitor is a rack-mounted system compatible with up to 16 sensors for monitoring multiple gas channels.
- The IR80 CO2 Gas Monitor is a standalone or networked monitor for carbon dioxide levels with alarms and calibration assistance.
We are manufacturers of Hot air oven or laboratory oven in India since 1990. Our laboratory oven are widely used
for day to day heating and drying applications performed in various laboratories.
IBL Biotechnology provides integrated solutions for process design, automation, and control across various industries. They offer services such as process design, mechanical and electrical installation, commissioning and training. IBL is committed to ensuring projects are delivered according to specifications. They partner with technology leaders including Siemens, Alfa Laval, and IFM to provide market-leading solutions. IBL has experienced engineers and technicians who work to define challenges and provide customized solutions that meet clients' needs.
Eclipse 705 GWR Level Transmitter's calibration and calibration verification are easily accomplished in a controlled workshop environment calibration test fixture. This feature allows the user to validate the initial, in-situ calibration, without the need to remove the probe from the vessel. This avoids the need for further time consuming and expensive in – situ process validation procedures, such as RO or WFI water metering and because the probe remains in the vessel there is no need for pressurising or depressurising of the vessel or further CIP/SIP cleaning regimes.
The test probe is mounted horizontally on a custom made test fixture fitted with a sliding target plate that can be moved along its entire length, to simulate desired test points. As all calibration information is stored in the electronics, either the electronics or the whole ”quick disconnect” transmitter housing can be quickly and easily removed, refitted to the test probe and powered up. The transmitter output can then be verified against the measured distance from the process connection to the target.
The document discusses several Parker Kittiwake products for machine condition monitoring including the MHC Bearing Checker, ANALEXfdMplus, and Heated Viscometer. The MHC Bearing Checker is a handheld device that detects high frequency acoustic emissions from bearings to monitor their condition. The ANALEXfdMplus measures ferrous wear debris in oil samples and includes various sample holders. The Heated Viscometer measures oil viscosity at high temperatures which can indicate problems like contamination.
We are manufacturers of bacteriological incubators in India, bacteriological incubators suppliers, laboratory incubator exporters, bacteriological incubator India. We also supply BOD incubators, carbon di oxide incubator and other laboratory incubators For More Information Please Logon http://goo.gl/iQdqZJ
The ChemDAQ Steri-Trac gas monitoring system provides toxic gas detection and workplace safety. It features a modular design that allows for custom configurations, and a sensor exchange program that reduces operating costs by replacing sensors every 4 months without requiring on-site calibration. The system monitors ethylene oxide, hydrogen peroxide, ozone, and peracetic acid, and provides trend analysis and early warnings via software.
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
The PCME QAL 181 is a particulate continuous emissions monitor that provides accurate measurement of low dust concentrations. It is suitable for measuring emissions from bag filters and electrostatic precipitators. The monitor has high accuracy, operates reliably at elevated temperatures, and has online calibration capabilities to minimize drift. It can measure particulate levels from 0-300 mg/m3 and integrate with data acquisition software for regulatory reporting.
The CLORA On-Line Analyzer uses monochromatic wavelength dispersive X-ray fluorescence (MWD XRF) to continuously analyze total chlorine concentrations between 0.2-3000 ppm in crude oil, water, and process streams. It provides real-time, precise measurements without requiring consumables. The analyzer operates on a variety of sample types and viscosities up to 160 cSt at pressures up to 80 psi and temperatures up to 300°F. It offers communication options and high precision, as demonstrated by its ability to repeatedly measure chlorine in crude oil and water samples with standard deviations of 0.4 ppm or less over 5-minute runs.
Natural Gamma Systems provides gamma-based instruments for measuring coal quality properties like ash content. Key points:
- The technology uses natural gamma radiation from coal to measure ash, avoiding health risks of radioactive sources. Over 270 ash probes have been installed worldwide.
- Products include ash probes for spot sampling, online ash monitors for belts/pipelines, and software for remote monitoring. The lab ash provides quick ash measurements from crushed samples.
- Benefits include continuous real-time ash data, improved consistency, increased saleable tonnage, and rejecting inferior coal. Customers include mines, power stations, and cement/steel facilities globally.
- The company offers proven technology, commissioning support, spare parts,
SCADA, control and communications of the Heavy Crude Oil Pipeline in Ecuador.
CUSTOMER BENEFITS
• Improved safety with leak detection and localization system
• Improved efficiencies with remote operation capability
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
We are manufacturers of Incubator shaker or orbital shakers in India since 1990. Our incubator shakers are widely
used for day to day bacteriological and varied laboratory applications requiring incubation as well as shaking tests
and procedures in variety of research and testing laboratories.
The Serinus 57 Total Reduced Sulfur analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an external thermal converter to measure TRS in ambient air (LDL <0.3 ppb, Range 0-10 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Magnetrol is a globally recognized manufacturer of level and flow measurement instrumentation and devices. Technologies include inferential and direct measurement.
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition and Metal Film Metrology high-tech semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, Battery & LED industries. We endeavor to be a leader in our product lines.
We focus on extending product lifecycle, providing solutions, and engineering enhancements to many production proven semiconductor process equipment most directly related to III-V processing. These semiconductor equipment have been used in production and R&D since the 1990′s. They have proven processes and research. Allwin21 Corp. customizes these systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system, and new critical components. This is to achieve the goal of giving our customers a production edge, with right cost, and without having to worry about obsolete parts.
We fotograferen, scannen woningen, gebouwen, constructies voor vastgoedmakelaars, architecten, projectontwikkelaars, aannemers,...
Daarnaast maken we 360° scans, virtual tours, grondplannen, luchtfoto's met
drones, mapping en nog veel meer.
Diensten voor vastgoed
Standaard fotografie
3d scans
Virtual tours
2d vloerplannen
Drone foto -en videografie
Virtual staging
Nabewerken foto's
Vastgoed teaser videos
Diensten voor
constructies
Foto en video
3d scans
E57 files
Vloerplannen
Puntenwolken
Mesh bestanden
Trueplan
Luchtfoto's
en meer
On-line, in-situ, and at-line monitoring of batch and continuous processes
Displays up to 15 properties at once and measures up to 30 properties per stream
Optical multiplexing capabilities provide analysis of up to 16 process streams using fiber optic or extractive stream switching
Utilizes process-proven ANALECT® Diamond 20™ Transept™ optical head
SpectraRTS™ software engineered exclusively for on-line monitoring, allowing use by engineers, maintenance personnel, and chemists
All ANALECT® lab and on-line systems share core optical technology, allowing instrument-to-instrument calibration transfers
We are manufacturers of Metabolic Shakers, Incubator shaker or orbital shakers in India since 1990. Our incubatorshakers are widely used for day to day bacteriological and varied laboratory applications requiring incubation aswell as shaking tests and procedures in variety of research and testing laboratories.For more information please log on http://cutt.us/3wtN
The document describes several gas monitoring devices:
- The 4 Channel Gas Monitor is a wall-mounted unit that monitors up to 4 toxic gases, combustible gases, or oxygen levels with displays and alarms.
- The Multichannel Gas Monitor is a rack-mounted system compatible with up to 16 sensors for monitoring multiple gas channels.
- The IR80 CO2 Gas Monitor is a standalone or networked monitor for carbon dioxide levels with alarms and calibration assistance.
We are manufacturers of Hot air oven or laboratory oven in India since 1990. Our laboratory oven are widely used
for day to day heating and drying applications performed in various laboratories.
IBL Biotechnology provides integrated solutions for process design, automation, and control across various industries. They offer services such as process design, mechanical and electrical installation, commissioning and training. IBL is committed to ensuring projects are delivered according to specifications. They partner with technology leaders including Siemens, Alfa Laval, and IFM to provide market-leading solutions. IBL has experienced engineers and technicians who work to define challenges and provide customized solutions that meet clients' needs.
Eclipse 705 GWR Level Transmitter's calibration and calibration verification are easily accomplished in a controlled workshop environment calibration test fixture. This feature allows the user to validate the initial, in-situ calibration, without the need to remove the probe from the vessel. This avoids the need for further time consuming and expensive in – situ process validation procedures, such as RO or WFI water metering and because the probe remains in the vessel there is no need for pressurising or depressurising of the vessel or further CIP/SIP cleaning regimes.
The test probe is mounted horizontally on a custom made test fixture fitted with a sliding target plate that can be moved along its entire length, to simulate desired test points. As all calibration information is stored in the electronics, either the electronics or the whole ”quick disconnect” transmitter housing can be quickly and easily removed, refitted to the test probe and powered up. The transmitter output can then be verified against the measured distance from the process connection to the target.
The document discusses several Parker Kittiwake products for machine condition monitoring including the MHC Bearing Checker, ANALEXfdMplus, and Heated Viscometer. The MHC Bearing Checker is a handheld device that detects high frequency acoustic emissions from bearings to monitor their condition. The ANALEXfdMplus measures ferrous wear debris in oil samples and includes various sample holders. The Heated Viscometer measures oil viscosity at high temperatures which can indicate problems like contamination.
We are manufacturers of bacteriological incubators in India, bacteriological incubators suppliers, laboratory incubator exporters, bacteriological incubator India. We also supply BOD incubators, carbon di oxide incubator and other laboratory incubators For More Information Please Logon http://goo.gl/iQdqZJ
The ChemDAQ Steri-Trac gas monitoring system provides toxic gas detection and workplace safety. It features a modular design that allows for custom configurations, and a sensor exchange program that reduces operating costs by replacing sensors every 4 months without requiring on-site calibration. The system monitors ethylene oxide, hydrogen peroxide, ozone, and peracetic acid, and provides trend analysis and early warnings via software.
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
The PCME QAL 181 is a particulate continuous emissions monitor that provides accurate measurement of low dust concentrations. It is suitable for measuring emissions from bag filters and electrostatic precipitators. The monitor has high accuracy, operates reliably at elevated temperatures, and has online calibration capabilities to minimize drift. It can measure particulate levels from 0-300 mg/m3 and integrate with data acquisition software for regulatory reporting.
The CLORA On-Line Analyzer uses monochromatic wavelength dispersive X-ray fluorescence (MWD XRF) to continuously analyze total chlorine concentrations between 0.2-3000 ppm in crude oil, water, and process streams. It provides real-time, precise measurements without requiring consumables. The analyzer operates on a variety of sample types and viscosities up to 160 cSt at pressures up to 80 psi and temperatures up to 300°F. It offers communication options and high precision, as demonstrated by its ability to repeatedly measure chlorine in crude oil and water samples with standard deviations of 0.4 ppm or less over 5-minute runs.
Natural Gamma Systems provides gamma-based instruments for measuring coal quality properties like ash content. Key points:
- The technology uses natural gamma radiation from coal to measure ash, avoiding health risks of radioactive sources. Over 270 ash probes have been installed worldwide.
- Products include ash probes for spot sampling, online ash monitors for belts/pipelines, and software for remote monitoring. The lab ash provides quick ash measurements from crushed samples.
- Benefits include continuous real-time ash data, improved consistency, increased saleable tonnage, and rejecting inferior coal. Customers include mines, power stations, and cement/steel facilities globally.
- The company offers proven technology, commissioning support, spare parts,
SCADA, control and communications of the Heavy Crude Oil Pipeline in Ecuador.
CUSTOMER BENEFITS
• Improved safety with leak detection and localization system
• Improved efficiencies with remote operation capability
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
We are manufacturers of Incubator shaker or orbital shakers in India since 1990. Our incubator shakers are widely
used for day to day bacteriological and varied laboratory applications requiring incubation as well as shaking tests
and procedures in variety of research and testing laboratories.
The Serinus 57 Total Reduced Sulfur analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an external thermal converter to measure TRS in ambient air (LDL <0.3 ppb, Range 0-10 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Magnetrol is a globally recognized manufacturer of level and flow measurement instrumentation and devices. Technologies include inferential and direct measurement.
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition and Metal Film Metrology high-tech semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, Battery & LED industries. We endeavor to be a leader in our product lines.
We focus on extending product lifecycle, providing solutions, and engineering enhancements to many production proven semiconductor process equipment most directly related to III-V processing. These semiconductor equipment have been used in production and R&D since the 1990′s. They have proven processes and research. Allwin21 Corp. customizes these systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system, and new critical components. This is to achieve the goal of giving our customers a production edge, with right cost, and without having to worry about obsolete parts.
We fotograferen, scannen woningen, gebouwen, constructies voor vastgoedmakelaars, architecten, projectontwikkelaars, aannemers,...
Daarnaast maken we 360° scans, virtual tours, grondplannen, luchtfoto's met
drones, mapping en nog veel meer.
Diensten voor vastgoed
Standaard fotografie
3d scans
Virtual tours
2d vloerplannen
Drone foto -en videografie
Virtual staging
Nabewerken foto's
Vastgoed teaser videos
Diensten voor
constructies
Foto en video
3d scans
E57 files
Vloerplannen
Puntenwolken
Mesh bestanden
Trueplan
Luchtfoto's
en meer
XRF Based &Multi-Metals & Continuous Water Analyzer Xact920European Tech Serv
Process monitoring – feedback for water treatment may improve the efficiency of the treatment process – use fewer chemicals to achieve require effluent emission limits
Measurement of Se, As for compliance with Steam Electric Generating Effluent Guidelines
Monitoring of treatment of wastewater by biological based treatment systems
Measurement of Corrosion Products (e.g. Fe, Ni, Cr and Mn) to improve operating efficiency
Measurement of Elements in Nuclear Power Plant Applications (e.g. Pb, Cu, Fe)
Reduce laboratory analysis costs
The FROG-5000™ is a portable gas chromatograph (GC) that identifies multiple target volatile organic compounds (VOC) in water, soil, and air. The FROG-5000™ detects chemicals as volatile as vinyl chloride to semi-volatile organics such as naphthalene with lab quality results.
Featuring a MEMS (micro electro-mechanical systems), the FROG-5000™ has an integrated heater for temperature ramp chromatography – ramping the temperature reduces the analysis time and aids in the separation of late eluting compounds. These components combined with an internal PID identify VOCs in ambient air at concentrations as low as 1 part per billion.
Continuous analysis:
Continuous analysis of aerosols on filters for optical and thermal analysis
OC/EC determination:
Real time/online TC/BC/EC/OC and Brc analysis in combination with our Aethalometer AE33
Ease of Use:
No fragile glassware, no catalyst, no gas supplies needed
Rugged, Reliable, automatic:
35 years of published performance, rugged, all-steel construction, unattended operation – 1 month minimum
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
The Mi3 is a turnkey solution for automotive emission testing that features the world's fastest particle sensor. It provides accurate real-time data, reliable measurements in all environments, and ensures measurements meet emission regulations standards. The Mi3 requires little maintenance due to its low-maintenance particle sensor and self-diagnostics. It can integrate seamlessly with existing emission test infrastructure through various connection options.
THE GAS CHROMATOGRAPHIC REVOLUTION
FOR ENVIRONMENTAL MONITORING
PyxisGC BTEX is the first and unique gaschromatograph "carrier gas free" for remote BTEX monitoring
in ambient air. PyxisGC BTEX is manufactured by Pollution Analytical Equipment in compliance with
EN14662-3:2015.
"BTEX ambient air analysis: sources, regulations, technologies for controls"European Tech Serv
"BTEX ambient air analysis: sources, regulations, technologies for
controls"
In collaboration with The Council for Research and Experimentation in Agriculture at the Puglia
Regional Environmental Protection Agency (ARPA)
The M1000 operates according to the diffusion principle. The monitor is mounted on a flange which is located at the top of the silo or bin. The gas in the atmosphere of the silo diffuses into the oxygen sensor. Since there is no positive movement of chemical powder to the sensor the sampling gas will not block filters and tubing. The right design and choice of components ensures a long term maintenance free operation.
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Technology background HY-ALERTA SAFETY SYSTEMS – HY-ALERTA 2600European Tech Serv
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
H2scan’s 2620 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit. The monitor is designed for either ceiling or wall mount. H2scan’s hydrogen-specific sensor technology has no cross sensitivity to other combustible gases, thus eliminating false positive alarms and ensuring safety system reliability.
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...Joshua Orris
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
RoHS stands for Restriction of Hazardous Substances, which is also known as t...vijaykumar292010
RoHS stands for Restriction of Hazardous Substances, which is also known as the Directive 2002/95/EC. It includes the restrictions for the use of certain hazardous substances in electrical and electronic equipment. RoHS is a WEEE (Waste of Electrical and Electronic Equipment).
1. The all new ANALECT ®RefinIR™ is a fully
integrated laboratory autosampler and
FTIR instrument. It is designed to measure
liquid hydrocarbons including gasoline,
diesel and crude oils in a single autosam-
pler. It features the ANALECT Diamond 20™
Transept™interferometer platform with the
improved DCM 600™ data acquisition
electronics. This provides improved per-
formance utilizing SpectraQ software with
a customizable HMI for operating the sys-
tem. Determination of physical properties
and chemical composition can be achieved
with the touch of a button. The RefinIR sys-
tem automates calibration data collection
in support of the Hydrocarbon
SmartSystem® on-line process analyzer.
• RefinIR delivers automated spectral
data acquisition of multiple liquid refin-
ery stream samples from crude oils to
blended gasoline and diesel.
• Autosampler can be heated up to
125°C to allow sampling of heavy crudes
and intermediates, such as FCC feed.
• Utilizes the ANALECT XCORR™
model transference protocol allowing
data to be transferred to the on-line
ANALECT Hydrocarbon SmartSystem.®
• Holds 24 15 ml vials and automati-
cally transfers the sample to a flow-
NextGen Hydrocarbon
Analyzer for Lab
Automation and
Process Developmment
Applications
ANALECT
®
RefinIR™
AIT Applied Instrument Technologies®
ANALECT ®RefinIR
through transmission cell embedded
in the autosampler.
• Includes compliance to ASTM
D6122 via a wash and validation
functionality that eliminates cross-
contamination of samples and pro-
vides a quick assurance of spectral
quality.
• Reduces the laboratory benchtop
foot print of the prior ANALECT
RefinIR by up to 60%.
• Newly designed carousel for
robust operation.
R E F I N I R F E A T U R E S