The document provides a summary of Amit Modi's resume. It outlines his 10 years of experience in radio network optimization for 2G, 3G, and 4G networks. Some of the key projects he has worked on include the modernization of over 4000 sites in Germany, 5000 sites in Indonesia, and 3000 sites of network optimization in Indonesia. He is currently working as a specialist for Ericsson Global India on optimization projects in Germany and the Netherlands.
This document is a curriculum vitae for Sushil Kumar Kushwaha. It summarizes his professional experience in radio network optimization spanning over 8 years, including 3 months of onsite experience working with AT&T USA on LTE and WCDMA network expansion and optimization projects. It also lists his technical skills, qualifications, and contact information.
This document provides a summary of Satisha Kumar's professional experience and qualifications. Some key points:
- Satisha has over 3.6 years of experience in RF planning and optimization for 3G cellular networks working with Ericsson India.
- Professional experience includes radio network optimization, planning, parameter tuning, drive test analysis and troubleshooting.
- Onsite project experience with DTAC in Thailand, where Satisha helped with the integration of new sites, optimization, and clearing customer issues.
- Technical skills include the use of planning, optimization and analysis tools from Ericsson, TEMS and other vendors.
- Certifications include Ericsson RNO, RAN and RND certifications.
The document contains the resume of Akash Tandon summarizing his professional experience and qualifications. He has over 4.5 years of experience in telecommunications working for companies like Ericsson, Bharti Airtel, Vodafone, and Telcel optimizing 3G networks. He is skilled in tools for radio network optimization and holds professional certifications from Ericsson.
Sandeep Sharma is seeking a position in RF optimization or technical services with a reputable telecom organization. He has over 2 years of experience in RF optimization and technical services. Currently working as an RF engineer for Samsung, his responsibilities include network performance analysis, parameter optimization, drive test analysis, and troubleshooting. He has a Bachelor's degree in Electronics and Communication and is proficient with various RF tools and software.
Ganesh Sankarapandi has over 6 years of experience optimizing radio networks. He is currently a Senior Engineer at Ericsson India optimizing a GSM/UMTS network in Bangladesh that was swapped from Huawei to Ericsson. Previously, he held roles optimizing Vodafone's UMTS network as a 3G RF Engineer at Nokia and optimizing a swapped GSM/UMTS network for BSNL in India as a Senior RF Engineer. He has extensive experience monitoring KPIs, drive testing, parameter tuning, capacity planning, and troubleshooting various 2G and 3G technologies.
Pradeep Jain is an experienced telecom engineer seeking a new opportunity. He has over 6 years of experience in 2G, 3G, and LTE network optimization. Currently working with Huawei in South Africa, his previous roles include working with Metro Teleworks in South Africa and India on various telecom projects involving drive testing, parameter tuning, and troubleshooting network performance issues. He is proficient with several telecom tools and has expertise in radio network optimization, planning, and analysis.
Ajay Singh Verma has over 6 years of experience in RF planning, optimization, and operations for 2G, 3G, and 4G networks. He is currently working as an RF professional at Huawei Telecommunication for Telenor's GSM and LTE network in Maharashtra, where he is solely responsible for all RF activities. His daily tasks include monitoring KPIs, analyzing problem cells, implementing corrective actions, and ensuring network optimization and performance.
Srinivas Cheera is a network planning and optimization engineer with over 4 years of experience in RF planning and optimization of 2G, 3G, and LTE networks. He has worked on projects in India for Ericsson, Tata Teleservices, Idea Cellular, and Linquest Telecom optimizing networks and maintaining key performance indicators. He is proficient with various radio network planning and optimization tools and holds a Bachelor's degree in electronics and electrical engineering.
This document is a curriculum vitae for Sushil Kumar Kushwaha. It summarizes his professional experience in radio network optimization spanning over 8 years, including 3 months of onsite experience working with AT&T USA on LTE and WCDMA network expansion and optimization projects. It also lists his technical skills, qualifications, and contact information.
This document provides a summary of Satisha Kumar's professional experience and qualifications. Some key points:
- Satisha has over 3.6 years of experience in RF planning and optimization for 3G cellular networks working with Ericsson India.
- Professional experience includes radio network optimization, planning, parameter tuning, drive test analysis and troubleshooting.
- Onsite project experience with DTAC in Thailand, where Satisha helped with the integration of new sites, optimization, and clearing customer issues.
- Technical skills include the use of planning, optimization and analysis tools from Ericsson, TEMS and other vendors.
- Certifications include Ericsson RNO, RAN and RND certifications.
The document contains the resume of Akash Tandon summarizing his professional experience and qualifications. He has over 4.5 years of experience in telecommunications working for companies like Ericsson, Bharti Airtel, Vodafone, and Telcel optimizing 3G networks. He is skilled in tools for radio network optimization and holds professional certifications from Ericsson.
Sandeep Sharma is seeking a position in RF optimization or technical services with a reputable telecom organization. He has over 2 years of experience in RF optimization and technical services. Currently working as an RF engineer for Samsung, his responsibilities include network performance analysis, parameter optimization, drive test analysis, and troubleshooting. He has a Bachelor's degree in Electronics and Communication and is proficient with various RF tools and software.
Ganesh Sankarapandi has over 6 years of experience optimizing radio networks. He is currently a Senior Engineer at Ericsson India optimizing a GSM/UMTS network in Bangladesh that was swapped from Huawei to Ericsson. Previously, he held roles optimizing Vodafone's UMTS network as a 3G RF Engineer at Nokia and optimizing a swapped GSM/UMTS network for BSNL in India as a Senior RF Engineer. He has extensive experience monitoring KPIs, drive testing, parameter tuning, capacity planning, and troubleshooting various 2G and 3G technologies.
Pradeep Jain is an experienced telecom engineer seeking a new opportunity. He has over 6 years of experience in 2G, 3G, and LTE network optimization. Currently working with Huawei in South Africa, his previous roles include working with Metro Teleworks in South Africa and India on various telecom projects involving drive testing, parameter tuning, and troubleshooting network performance issues. He is proficient with several telecom tools and has expertise in radio network optimization, planning, and analysis.
Ajay Singh Verma has over 6 years of experience in RF planning, optimization, and operations for 2G, 3G, and 4G networks. He is currently working as an RF professional at Huawei Telecommunication for Telenor's GSM and LTE network in Maharashtra, where he is solely responsible for all RF activities. His daily tasks include monitoring KPIs, analyzing problem cells, implementing corrective actions, and ensuring network optimization and performance.
Srinivas Cheera is a network planning and optimization engineer with over 4 years of experience in RF planning and optimization of 2G, 3G, and LTE networks. He has worked on projects in India for Ericsson, Tata Teleservices, Idea Cellular, and Linquest Telecom optimizing networks and maintaining key performance indicators. He is proficient with various radio network planning and optimization tools and holds a Bachelor's degree in electronics and electrical engineering.
Lelin Kumar Singh has over 7 years of experience in RF planning and optimization for 2G, 3G, HSDPA and HSUPA networks. He has worked for various companies including Ericsson India, Alcatel Lucent and GIS Private Limited. Some of his responsibilities have included dimensioning networks, validating site configurations, analyzing site performance, meeting KPIs and troubleshooting issues. He holds a B.E. in Electronics and Communication from J.I.E.T.
Saif ul Amin has over 12 years of experience in telecommunications engineering. He has specialized expertise in deploying, transforming, and managing BSS and transmission networks, including 2G to LTE modernization projects. He is proficient in working with various vendors including Ericsson, Huawei, NEC, and more. Currently he works as the Team Leader for RAN, BSS, and transmission at Warid Telecom, where he is responsible for network operations, maintenance, and optimization projects.
Ganesh has over 5 years of experience as a 3G RF engineer optimizing radio networks. He currently works for Nokia optimizing Vodafone's WCDMA network, which involves monitoring KPIs, planning new sites, capacity upgrades, and drive testing. Previously he worked for IWS optimizing BSNL's GSM and WCDMA networks during equipment swaps from various vendors to ZTE and Huawei, focusing on improving KPIs and troubleshooting issues.
This document is a resume for Adeel Ahmed, a 2G/3G/LTE RF engineer with almost 4 years of experience in network optimization and planning for cellular networks. It lists his contact information and objective, followed by a work history summarizing his roles optimizing networks for various telecom companies in Pakistan and the UAE. It also provides details of his educational background and technical skills.
Anoop Kumar Singh has over 7 years of experience optimizing 2G, 3G, and LTE mobile networks as a radio network optimizer. He currently works for Shree Balaji IT Solutions optimizing Samsung-Reliance Jio's LTE network in Lucknow. Previously he optimized networks for Airtel, Tata, Uninor, Idea, and other carriers. He holds a B.Tech in computer science and has experience using tools like GENEX, TEMS, LMT, and MapInfo to perform drive tests, analyze issues, and improve network performance and coverage.
Brijmani Kumar has over 8 years of experience in RF optimization for LTE and CDMA networks. He currently works as an RF LTE Optimizer for Reliance Jio, where he is responsible for deployment and optimization of LTE networks in Delhi. Previously he worked for Ericsson as an RF Optimizer, where he optimized CDMA and LTE networks in the US. He is proficient in various RF optimization tools and has expertise in improving network KPIs.
Pramod Gautam has over 10 years of experience in telecom network engineering. He currently works as a Solution Architect for Ericsson Global Pvt. Ltd. in Pune, India. Previously he has worked for companies like Reliance JIO, Alcatel-Lucent, Ericsson, and Nokia Siemens Network. He has expertise in technologies like LTE, VoLTE, GSM, and wireless communications. Pramod seeks to join a growing organization where he can further develop his skills and help achieve organizational goals.
Sukanta Kumar Choudhury has over 8 years of experience in telecommunications network operations and maintenance with leading telecom operators. He is currently working as an Integration and Commissioning Engineer with Reliance Jio Infocomm where he is responsible for coordinating deployment activities and ensuring integration and operation of network transport equipment. Prior to this, he held roles as Deputy Manager of Network Operations and POI Coordinator, where he managed transmission planning, fiber fault restoration, and point of interconnect maintenance.
Tushar Srivastava is a telecommunications engineer seeking a position in RF optimization and planning. He has over 5 years of experience optimizing UMTS/GSM networks for various operators in India and the UK using numerous planning and optimization tools. His experience includes monitoring KPIs, parameter optimization, capacity planning, neighbor cell planning, and drive testing. He holds technical certifications from Ericsson and has received several awards for his work and academic performance.
Ajith Kumar has over 7 years of experience in telecommunications optimization. He has worked on 4G/3G/2G networks for various customers like Ericsson, ZTE, Alcatel-Lucent, and Huawei. His roles have included network optimization, parameter tuning, drive testing, troubleshooting, and performance analysis using various tools. Currently he works as a senior engineer optimizing 4G, 3G, and 2G networks for Vodafone Spain.
This document describes the roles and responsibilities for three different network optimization engineer positions: LTE optimization engineer, 3G WCDMA Optimization Engineer, and 2G Optimization Engineer. The LTE optimization engineer role involves monitoring, analyzing, and optimizing LTE KPIs through parameter tuning and antenna adjustments. The 3G optimization engineer role focuses on activities like KPI monitoring, antenna configuration, performance analysis, traffic optimization, and neighbor optimization. Similarly, the 2G optimization engineer role involves RF planning, parameter setting, KPI monitoring, antenna configuration, performance analysis, traffic optimization, and neighbor optimization for 2G networks.
This document is a curriculum vitae for Rajneesh Mohan, who has over 7 years of experience in 2G, 3G, and LTE RF optimization and planning. He has worked on projects in Bangladesh, Nepal, Spain, and France for companies like Aircom, Ericsson, and Sasken. The CV lists his educational background, skills, work experience on various optimization projects, responsibilities, and qualifications.
Harshit Kumar Sengar has over 10 years of experience in RF planning, optimization, and deployment for cellular networks including GSM, GPRS, EDGE, 3G, LTE, and VoLTE. He has worked with major telecom operators and vendors in India such as Reliance Jio, Airtel, Vodafone, Reliance Communications, and Ericsson. Currently he is an RF Planning and Optimization Expert at Reliance Jio, where he is responsible for RF planning of new sites, optimization of KPIs and network parameters, and ensuring RF quality.
Company Name: - Reliance Jio Infocomm Limited (Rajasthan Circle)
Current Profile: RF Planning and Optimization Expert (RF Manager)
LTE, LTE Advanced
Responsibility: To Manage RF Network of Multi Carrier Bandwidth in LTE System
Working on 2300 MHz, 1800 MHz, and 850 MHz Dual Carrier C1 C2.
Nawal kishore Prasad has over 8 years of experience in the telecom sector, currently working as a Project Coordinator for Welkin Telecom Infra Pvt Ltd on Reliance Jio projects in Jharkhand Circle. He is responsible for installation, commissioning, and testing activities. He has hands-on experience with 3G and 4G networks and equipment from manufacturers like ZTE, Ericsson, and Samsung. As Project Coordinator, his responsibilities include planning and executing rollout schedules, coordinating with installation vendors, and ensuring quality and customer satisfaction. Previously he has held roles as Cluster Lead for Tata Docomo and STEL networks, overseeing operations and maintenance.
1. Niraj Kumar Srivastav is seeking a challenging career in telecommunications and has over 2 years experience in mobile network RF optimization.
2. His experience includes drive test analysis, troubleshooting RF issues, monitoring KPIs, and providing solutions to improve network quality and customer experience.
3. He is currently working as an RF Coordinator for Reliance Jio in Patna, where he is responsible for new site surveys, optimization, and maintaining KPIs like RSRP, SINR, and call success rates.
Lakshman Rao is a telecom engineer seeking a position to utilize his 3 years of experience in the telecom industry. He has skills in network planning, optimization, and troubleshooting for technologies including GSM, CDMA, and WCDMA. He is proficient with various drive test and post-processing software tools used for network monitoring, optimization, and issue resolution. His experience includes projects with BSNL, Idea, MTS, and Tata focusing on tasks like drive testing, data analysis, parameter tuning, capacity planning and issue management.
Sandeep Sharma is seeking a position in RF optimization or technical services with a reputable telecom organization. He has over 2 years of experience as an RF engineer performing tasks like network optimization, drive testing, parameter tuning, and troubleshooting. He is proficient with various RF tools and has experience working with networks from companies like Nokia, Airtel, and Vodafone. Sandeep holds a B.Tech in electronics and communication and is looking to further develop his skills.
This document is a curriculum vitae for Dipu Kumar that outlines his professional experience and qualifications. He has over 2 years of experience in telecom networks for 2G and 3G, currently working as an RF Coordinator for Vodafone in Rajasthan. Previous roles include working as a Drive Test Engineer for Airtel 3G networks in Delhi. He has expertise in RF optimization, drive testing, site selection and planning, and parameter tuning for 2G, 3G and 4G networks.
This document is a resume for Ankit Baliyan. It summarizes his work experience in transmission planning and maintenance for telecom companies over 2 years and 3 months. His experience includes transmission network planning, link budgeting, frequency planning, site surveys, and equipment procurement. He is seeking new opportunities in network design, transmission planning, and operations and maintenance for the telecom industry.
This document contains the resume of Bharath R, an RF optimization engineer with over 5 years of experience in telecom. He has worked with various organizations like Xceed Technologies, Ericsson, and Nokia Siemens Networks on projects involving 3G and LTE network optimization, planning and troubleshooting. Bharath holds a B.E. in electronics and communication and has expertise in tools like Windcatcher, Xynergy, QCAT and JDSU for network analysis and optimization.
This document contains a resume for Sagar Maruti Kuchekar. It includes details about his education, work experience in telecom domains like LTE, GSM and device testing over 3 years, and skills with technologies such as RF planning and optimization. It also lists his academic qualifications, past employers and roles, including as an RF planning and optimization engineer, and responsibilities carried out in each role.
Lelin Kumar Singh has over 7 years of experience in RF planning and optimization for 2G, 3G, HSDPA and HSUPA networks. He has worked for various companies including Ericsson India, Alcatel Lucent and GIS Private Limited. Some of his responsibilities have included dimensioning networks, validating site configurations, analyzing site performance, meeting KPIs and troubleshooting issues. He holds a B.E. in Electronics and Communication from J.I.E.T.
Saif ul Amin has over 12 years of experience in telecommunications engineering. He has specialized expertise in deploying, transforming, and managing BSS and transmission networks, including 2G to LTE modernization projects. He is proficient in working with various vendors including Ericsson, Huawei, NEC, and more. Currently he works as the Team Leader for RAN, BSS, and transmission at Warid Telecom, where he is responsible for network operations, maintenance, and optimization projects.
Ganesh has over 5 years of experience as a 3G RF engineer optimizing radio networks. He currently works for Nokia optimizing Vodafone's WCDMA network, which involves monitoring KPIs, planning new sites, capacity upgrades, and drive testing. Previously he worked for IWS optimizing BSNL's GSM and WCDMA networks during equipment swaps from various vendors to ZTE and Huawei, focusing on improving KPIs and troubleshooting issues.
This document is a resume for Adeel Ahmed, a 2G/3G/LTE RF engineer with almost 4 years of experience in network optimization and planning for cellular networks. It lists his contact information and objective, followed by a work history summarizing his roles optimizing networks for various telecom companies in Pakistan and the UAE. It also provides details of his educational background and technical skills.
Anoop Kumar Singh has over 7 years of experience optimizing 2G, 3G, and LTE mobile networks as a radio network optimizer. He currently works for Shree Balaji IT Solutions optimizing Samsung-Reliance Jio's LTE network in Lucknow. Previously he optimized networks for Airtel, Tata, Uninor, Idea, and other carriers. He holds a B.Tech in computer science and has experience using tools like GENEX, TEMS, LMT, and MapInfo to perform drive tests, analyze issues, and improve network performance and coverage.
Brijmani Kumar has over 8 years of experience in RF optimization for LTE and CDMA networks. He currently works as an RF LTE Optimizer for Reliance Jio, where he is responsible for deployment and optimization of LTE networks in Delhi. Previously he worked for Ericsson as an RF Optimizer, where he optimized CDMA and LTE networks in the US. He is proficient in various RF optimization tools and has expertise in improving network KPIs.
Pramod Gautam has over 10 years of experience in telecom network engineering. He currently works as a Solution Architect for Ericsson Global Pvt. Ltd. in Pune, India. Previously he has worked for companies like Reliance JIO, Alcatel-Lucent, Ericsson, and Nokia Siemens Network. He has expertise in technologies like LTE, VoLTE, GSM, and wireless communications. Pramod seeks to join a growing organization where he can further develop his skills and help achieve organizational goals.
Sukanta Kumar Choudhury has over 8 years of experience in telecommunications network operations and maintenance with leading telecom operators. He is currently working as an Integration and Commissioning Engineer with Reliance Jio Infocomm where he is responsible for coordinating deployment activities and ensuring integration and operation of network transport equipment. Prior to this, he held roles as Deputy Manager of Network Operations and POI Coordinator, where he managed transmission planning, fiber fault restoration, and point of interconnect maintenance.
Tushar Srivastava is a telecommunications engineer seeking a position in RF optimization and planning. He has over 5 years of experience optimizing UMTS/GSM networks for various operators in India and the UK using numerous planning and optimization tools. His experience includes monitoring KPIs, parameter optimization, capacity planning, neighbor cell planning, and drive testing. He holds technical certifications from Ericsson and has received several awards for his work and academic performance.
Ajith Kumar has over 7 years of experience in telecommunications optimization. He has worked on 4G/3G/2G networks for various customers like Ericsson, ZTE, Alcatel-Lucent, and Huawei. His roles have included network optimization, parameter tuning, drive testing, troubleshooting, and performance analysis using various tools. Currently he works as a senior engineer optimizing 4G, 3G, and 2G networks for Vodafone Spain.
This document describes the roles and responsibilities for three different network optimization engineer positions: LTE optimization engineer, 3G WCDMA Optimization Engineer, and 2G Optimization Engineer. The LTE optimization engineer role involves monitoring, analyzing, and optimizing LTE KPIs through parameter tuning and antenna adjustments. The 3G optimization engineer role focuses on activities like KPI monitoring, antenna configuration, performance analysis, traffic optimization, and neighbor optimization. Similarly, the 2G optimization engineer role involves RF planning, parameter setting, KPI monitoring, antenna configuration, performance analysis, traffic optimization, and neighbor optimization for 2G networks.
This document is a curriculum vitae for Rajneesh Mohan, who has over 7 years of experience in 2G, 3G, and LTE RF optimization and planning. He has worked on projects in Bangladesh, Nepal, Spain, and France for companies like Aircom, Ericsson, and Sasken. The CV lists his educational background, skills, work experience on various optimization projects, responsibilities, and qualifications.
Harshit Kumar Sengar has over 10 years of experience in RF planning, optimization, and deployment for cellular networks including GSM, GPRS, EDGE, 3G, LTE, and VoLTE. He has worked with major telecom operators and vendors in India such as Reliance Jio, Airtel, Vodafone, Reliance Communications, and Ericsson. Currently he is an RF Planning and Optimization Expert at Reliance Jio, where he is responsible for RF planning of new sites, optimization of KPIs and network parameters, and ensuring RF quality.
Company Name: - Reliance Jio Infocomm Limited (Rajasthan Circle)
Current Profile: RF Planning and Optimization Expert (RF Manager)
LTE, LTE Advanced
Responsibility: To Manage RF Network of Multi Carrier Bandwidth in LTE System
Working on 2300 MHz, 1800 MHz, and 850 MHz Dual Carrier C1 C2.
Nawal kishore Prasad has over 8 years of experience in the telecom sector, currently working as a Project Coordinator for Welkin Telecom Infra Pvt Ltd on Reliance Jio projects in Jharkhand Circle. He is responsible for installation, commissioning, and testing activities. He has hands-on experience with 3G and 4G networks and equipment from manufacturers like ZTE, Ericsson, and Samsung. As Project Coordinator, his responsibilities include planning and executing rollout schedules, coordinating with installation vendors, and ensuring quality and customer satisfaction. Previously he has held roles as Cluster Lead for Tata Docomo and STEL networks, overseeing operations and maintenance.
1. Niraj Kumar Srivastav is seeking a challenging career in telecommunications and has over 2 years experience in mobile network RF optimization.
2. His experience includes drive test analysis, troubleshooting RF issues, monitoring KPIs, and providing solutions to improve network quality and customer experience.
3. He is currently working as an RF Coordinator for Reliance Jio in Patna, where he is responsible for new site surveys, optimization, and maintaining KPIs like RSRP, SINR, and call success rates.
Lakshman Rao is a telecom engineer seeking a position to utilize his 3 years of experience in the telecom industry. He has skills in network planning, optimization, and troubleshooting for technologies including GSM, CDMA, and WCDMA. He is proficient with various drive test and post-processing software tools used for network monitoring, optimization, and issue resolution. His experience includes projects with BSNL, Idea, MTS, and Tata focusing on tasks like drive testing, data analysis, parameter tuning, capacity planning and issue management.
Sandeep Sharma is seeking a position in RF optimization or technical services with a reputable telecom organization. He has over 2 years of experience as an RF engineer performing tasks like network optimization, drive testing, parameter tuning, and troubleshooting. He is proficient with various RF tools and has experience working with networks from companies like Nokia, Airtel, and Vodafone. Sandeep holds a B.Tech in electronics and communication and is looking to further develop his skills.
This document is a curriculum vitae for Dipu Kumar that outlines his professional experience and qualifications. He has over 2 years of experience in telecom networks for 2G and 3G, currently working as an RF Coordinator for Vodafone in Rajasthan. Previous roles include working as a Drive Test Engineer for Airtel 3G networks in Delhi. He has expertise in RF optimization, drive testing, site selection and planning, and parameter tuning for 2G, 3G and 4G networks.
This document is a resume for Ankit Baliyan. It summarizes his work experience in transmission planning and maintenance for telecom companies over 2 years and 3 months. His experience includes transmission network planning, link budgeting, frequency planning, site surveys, and equipment procurement. He is seeking new opportunities in network design, transmission planning, and operations and maintenance for the telecom industry.
This document contains the resume of Bharath R, an RF optimization engineer with over 5 years of experience in telecom. He has worked with various organizations like Xceed Technologies, Ericsson, and Nokia Siemens Networks on projects involving 3G and LTE network optimization, planning and troubleshooting. Bharath holds a B.E. in electronics and communication and has expertise in tools like Windcatcher, Xynergy, QCAT and JDSU for network analysis and optimization.
This document contains a resume for Sagar Maruti Kuchekar. It includes details about his education, work experience in telecom domains like LTE, GSM and device testing over 3 years, and skills with technologies such as RF planning and optimization. It also lists his academic qualifications, past employers and roles, including as an RF planning and optimization engineer, and responsibilities carried out in each role.
The document discusses 4G LTE drive testing. It describes the necessary equipment for drive testing including a notebook, GPS, and LTE dongle. It outlines key LTE radio parameters that are measured like PCI, RSRP, SINR, and MIMO. It also discusses measuring UE state information, throughput, and LTE access procedures including attach requests, random access failures, and E-RAB failures. Finally, it compares the impact of ANR capabilities versus UE capabilities on measuring neighboring cells within and between eNodeBs.
This document provides guidelines for LTE radio frequency (RF) network optimization. It describes the network optimization process including single site verification and RF optimization. Key aspects of RF optimization covered include preparing for optimization by collecting data, analyzing problems related to coverage, signal quality and handover success rate, and adjusting parameters like transmit power, antenna tilts and neighboring cell configurations. Common issues addressed are weak coverage, coverage holes, lack of a dominant cell, and cross coverage between cells. Optimization methods and specific cases are presented to resolve different problems.
Drive tests are performed to continuously monitor and optimize network performance. Key parameters measured include RxLevel, RxQuality, Frame Erasure Rate, Bit Error Rate, Carrier to Interferer ratio, and Speech Quality Index for GSM networks. For CDMA networks, parameters like RxLevel, TxPower, Carrier Energy to Interference, Carrier to Interferer ratio, and Signal to Noise Ratio are measured. Maintaining these parameters within normal ranges helps ensure quality of service and identify issues needing attention.
Rakesh Singh Gopikrishna is an experienced telecom professional seeking a middle level role in network services, preferably in telecom/ISP sectors. He has over 6 years of experience in project management, operations, network planning and engineering roles. He is BUGS certified and has attended various trainings. He is currently an Assistant Manager at Idea Cellular handling network services including maintenance, monitoring and troubleshooting of their Ericsson platform. Previously he worked at Ericsson India providing international support to European customers. He has also worked at Loop Mobile and CMC Ltd handling roles in core network operations and maintenance, transmission planning, and IT support respectively.
This document provides a summary of Munendra Singh's professional experience and technical skills for an RF Optimization role focusing on LTE networks. It outlines his 5+ years of experience optimizing networks for various global operators, including expertise in monitoring KPIs, troubleshooting issues, parameter changes, and providing optimization reports. It also lists his proficiency with various optimization tools and technical skills related to LTE planning, optimization, and analysis.
Munendra Singh Jadon is an RF Optimization Consultant with over 8 years of experience optimizing 2G, 3G, and LTE networks for various global operators. He has expertise in performance monitoring, troubleshooting issues like poor call setup success rates and throughput, and implementing parameter changes to improve KPIs. He is proficient with network optimization tools from Nokia, Huawei, Samsung, Ericsson and other vendors. Currently he is involved in the daily optimization of Claro Brazil's network to address issues with call setup, handover, and throughput KPIs.
This document contains the resume of Ankit Tomar. It summarizes his contact information, objective, qualifications, work experience in the telecommunications industry spanning over 3 years and 10 months with various projects in countries like Spain, UK, USA, Malaysia and Indonesia. It also lists his responsibilities in 4G, 3G and 2G networks, tools experience, internships, projects, achievements and qualifications.
Devender Kumar has over 4 years of experience in radio network optimization for GSM and WCDMA networks. He has skills in rollout optimization, cluster optimization, SWAP projects, KPI optimization, log file analysis and reporting, traffic balancing, and parameter optimization. He is currently working as a radio network optimizer for Maxis Malaysia, where he is responsible for network performance monitoring and 3G KPI optimization.
CV_Zafar_Telecom O&M_RF Engineer-Coordinator_Business Development Manager (22...Zafar Iqbal
This document provides a summary of an individual's objectives, education, certifications, and work experience in engineering and project management. The individual aims to utilize their engineering and technical skills while gaining professional growth. They have a bachelor's degree in telecommunications engineering and certifications in telecom systems. Their work experience includes roles in business development, project coordination, field engineering, and technical support across various telecom projects in Pakistan, UAE, Saudi Arabia and other countries.
Rahul Kumar is a senior engineer at Ericsson India Global Pvt Ltd with over 8 years of experience in mobile network optimization. He has extensive expertise in 2G, 3G, and LTE technologies and optimization tools. Some of his key skills include drive test analysis, planning tools, performance analysis tools, and working with various RAN equipment vendors. He has experience on optimization projects in Brazil, Mexico, and India.
This document is a resume for Adeel Ahmed, a 2G/3G/LTE RF engineer with almost 4 years of experience in network optimization and planning for cellular networks. It lists his contact information and objective, followed by a work history summary highlighting his roles optimizing networks for various companies in Pakistan and the UAE. It also provides details of his educational background and technical skills.
The document provides a summary of Alia Khan's professional experience and qualifications. She has over 17 years of experience in roles including network operations, wireless engineering, project management, and customer support. Her most recent roles include 4 years of experience managing network deployments and projects as a project manager at Nokia and implementation manager at Ericsson. She has an M.S. in Business Administration and B.S. in Information Systems Management and various technical certifications. Her technical skills include software such as MS Office, programming languages, and network tools.
Rami Abou Omeira is an Egyptian engineer with 10 years of experience in telecommunications as a senior engineer for 2G, 3G, and 4G networks. He has managed projects in multiple countries and has experience working with Nokia, Alcatel-Lucent, Huawei, Ericsson, and Motorola. Currently he works as a back office engineer for Ericsson, providing support to field engineers.
Syed Kashan Ali is seeking a position that allows him to utilize his skills in integrity, professionalism, and career development. He has over 8 years of experience in fields including research, engineering, planning, and optimization for companies such as Ericsson, L-3, Huawei, and Telecard. He has expertise in areas like antenna design, radio frequency planning, network optimization, and software like ADS, HFSS, and TEMS.
Waqas Abbas has over 6 years of experience in the telecom sector in field operations and transmission network support roles. He has worked on projects for major operators in Pakistan like China Mobile Pakistan and Ufone. His experience includes roles as a team lead for field operations and transmission network support. He holds a Bachelor's degree in electronic engineering with a focus on telecommunications.
Sunil Saini seeks a challenging career in wireless communications. He has over 3 years of experience in telecom as an RF engineer, with expertise in GSM 2G and 3G networks. His experience includes drive testing, optimization, and troubleshooting to improve network performance metrics like call drops, handovers, and quality. He is proficient with testing tools like TEMS and analysis tools like MCOM and MapInfo.
Harith Zaidan Khalaf is an instrumentation and RF network engineer with over 15 years of experience. He holds a B.Sc. in Communications and Electronics Engineering from Mosul University. He is proficient in English, Arabic, and Kurdish. Some of his past roles include serving as an Instrumentation Team Leader for various power plant projects in Iraq and an RF Planning and Optimization Team Leader for Asia Cell's networks in Kirkuk and Diyala, Iraq. He has extensive experience in instrumentation, power plant commissioning, and GSM/UMTS network planning, optimization, and troubleshooting. He is skilled at leading technical teams and solving complex problems under pressure.
Pankaj Patel is an RF engineer with over 3 years of experience in GSM, WCDMA, and LTE technologies. He has experience in network performance monitoring and optimization through analyzing KPIs and drive test data. Currently working as an RF planning and optimization engineer for Idea Cellular in Satara, India, he is responsible for monitoring and improving the performance of 2G, 3G, and 4G networks in the cluster.
Malik MD Nurani has over 10 years of experience in RF planning and optimization for 5G NSA, LTE, VoLTE, WCDMA, and GSM networks. He has expertise in tools such as TEMS, Mentum, ATOLL, MCOM, and ACTIX. Currently he works as a Senior RF Engineer at Vodafone Idea, where his responsibilities include drive test analysis, parameter tuning, and troubleshooting to achieve KPI targets and improve network quality. Previously he held optimization roles at Reliance Jio, Huawei, and ZTE, where he performed activities such as coverage optimization, carrier aggregation deployment, and VoLTE parameter tuning.
Vikrant Tiwari is a RF professional with over 5 years of experience in RF optimization, 3G and GSM operations, and data analysis. He has optimized networks for Vodafone and Airtel across several cities and states in India. Currently he works as a Network Design and Optimization Engineer for Nokia Solutions and Networks in Lucknow, where he is responsible for monitoring KPIs, planning new sites, and optimizing network performance.
Muhammad Javed Iqbal is a Pakistani RF post processing engineer with over 3 years of experience in drive testing, log file analysis, and troubleshooting for 2G, 3G, and 4G networks. He currently works for Komkonsult Engineering Services analyzing 2G and 3G networks to improve KPIs like CDR, HOSR, and Rx quality. Previously he has worked on drive testing projects for Telenor, Zong, Ufone, and Mobilink networks using tools like Netnumen, TEMS Investigation, and MapInfo Professional. He has a MSc in Telecommunications from GCU Lahore and is proficient in technologies like LTE, WCDMA, G
Nitesh Kumar Chourasia is applying for an LTE RF Optimization Engineer position. He has 7 years of experience in telecommunications including 3.5 years of experience with LTE. He currently works as an RF Assurance State Lead for Reliance Jio Infocomm in Odisha. Previously he has worked for Ericsson, Samsung, Nokia Siemens Networks, Huawei, and Alcatel Lucent optimizing 2G, 3G, and LTE networks. He has expertise in RF planning, optimization, and drive testing tools like MapInfo, Nemo Outdoor, and TEMS.
Priyank Sharma is seeking a managerial role in maintenance operations or project management, preferably in the telecom sector. He has over 4.5 years of experience in telecom operations and maintenance. Currently he is a Cluster Manager at ZTE Telecommunication India Pvt. Ltd., where he is responsible for the maintenance and operations of 588 sites. He has experience managing projects, installations, commissioning, materials, teams and troubleshooting networks and equipment.
1. AMIT MODI
120/245 Lajpat Nagar Kanpur-208005
Contact Number: +91-9650270761 ( India)
+91-8334088345 (India)
Mail : darrenamit@gmail.com
RESUME SUMMARRY
Professional highlights: Highly motivated and goal oriented telecom professional having
experience of 10 years (2G, 3G & 4G) in radio network optimization with proven skills of
working independently or as a team member to optimize & Test network to enhance efficiency.
Ericsson “ETCP RNO” Certified (October 2014)
Nominated for “Ericsson Rock Star ACE Awards” in Q4’ 2014.
Successfully completed 4000 Sites Modernization RBS 3000 series to RBS 6000 series
and Pre –Post KPI achievements (Project Vodafone Germany)
Successfully worked on ECO, ERA tool Specific for Ericsson for the Physical
Optimization & OSS KPI optimization.
Successfully completed more than 5000 Sites Modernization from FLEXI BTS to FMR
BTS (Nokia) in Indonesia – Post KPI achievements (Project INDOSAT Indonesia)
Successfully completed more than 3000 Sites Modernization from Siemens BTS to
Huawei in Indonesia – Post KPI achievements (Project HCPT Indonesia).
Successfully completed more than 3000 sites MS Optimization (HCPT Indonesia)
Successfully handled 5 months Audit Project of BANGLALINK Operator (Nokia,
Siemens, Ericsson & Huawei) With PWC.
Successfully completed more than 640 sites, Single site acceptance (Siemens BTS) with
TELKOMSEL operator in SEMARANG (Indonesia) 2009.
Appreciation certificate from NSN for excellent work on Fastest Swap project Idea-NSN-
UP (2007).
Successfully completed 6 cities Optimization Project (UP East Circle) (2008)
OSS & Performance tools (BATRANA / RVA / ITK / SRAN /SRS/ Site Handler /
Google Earth / MapInfo etc) to analyze network statistic measurement in BSS.
Improved Paging Success rate for Huawei Sumatra Region from 90% to 99.2%.
Successfully completed more than 2000 sites IDEA Nokia Swap (Siemens to Flexi Nokia
BTS Modernization) in 2008 UPWEST CIRCLE, Handover based on BSC’s.
Fast learner, strong analytical thinking, especially in telecommunication field
Having Good Understanding of LTE Call Flow, RB, RE, Handover Events, Protocol &
Procedures, SON, ANR etc..
Providing Tech Support for Huawei-Internux LTE Indonesia, having rollout of 2000
eNBs of BTS3900.
Strong create new data base for New Site, TRX expansion, Carrier Expansion.
Strong create new database for re-home and integration BSC to BSC, BSC to MSC and
BSC to MGW to MSC.
Expertise in Improve KPIs and Exclusions to meet targets.
Good Knowledge of KPI, Counter and Formula of Nokia BSS, Ericsson BSS, Huawei BSS
and Siemens BSS System.
2. BSS Analysis for KPI and troubleshooting for BSS Problem (Alarm Identification / Root
Cause Findings / Troubleshooting etc) for Ericsson, Nokia, Siemens & Huawei System.
High degree of statistical analysis, features & Network Enhancement in the Siemens,
Nokia, Huawei & Ericsson system
Network Tuning & Optimization and Radio Network Feature Siemens, Nokia,
Huawei & Ericsson.
Job Experience: 10 Years in Radio Network Development in which 6 years
experience of Overseas Projects.
Education: B.TECH (Electronics & Telecommunication), UPTECH University, LUCKNOW.
Current Location: India ( Gurgaon)
Current Employer: Ericsson Global India Pvt. Ltd.
Email: darrenamit@gmail.com, amit.modi@ericsson.com
Experience Summary
Presently working as Specialist For Ericsson Global India Pvt Ltd (from November
2013 to Present)
Project O2 UK (Telefonica Operator) (November 2013 to December 2013)
Daily basis worst cell performance monitoring & analysis (2G-3G)
KPI monitoring & Recommendations (2G-3G)
Project Vodafone Germany (January 2014 till present)
Project Vodafone Netherland (LTE C-survey), KPI acceptance ( Feb 2016 to till
now)
Job Profile
Working as Team Lead for Vodafone Germany Project 2G-3G One to One Swap (L4L),
Swapping RBS 3000 to RBS 6000 series and Siemens to RBS 6000 series.
Support for LTE Roll Out project (Drive Test Report Preparation & Log-file analysis).
Analysis of Drive Tests done by measuring Throughput, SNR, RSRP, RSRQ, handovers
for LTE.
Analysis of Drive Tests done by measuring Throughput, SNR, RSCP, Ec/Io, Ping Round
Trip Time, Coverage Holes, CSSR, Drop call Rate analysis for 2G-3G & Handover success
Rate.
Daily Report Analysis (KPI) – Analysis of network performance with respect to various
KPI’s such as Call Drops, CSSR, RF Failure & Handover Failure , RRC Establishment
Failure Ratio, RAB Loss Ratio & RAB establishment failure ratio for CS & PS Both
Handling 8 RNO working for Cluster Optimization & Single Site acceptance, customer
complaint resolution, new capacity site optimization & worst cells improvement plan.
3. Also timely delivery of work assigned to the RNO for cluster optimization & Single site
acceptance.
G-Station deliveries for DT reporting and OSS KPIs with analysis for cluster & meta-
cluster analysis (DT analysis Coverage analysis, Throughput analysis, Missing
neighbour analysis, Bad Coverage spot findings and analysis, New site proposals etc).
Responsible for EDGE & GPRS Optimization to enhance the Data KPI throughout the
entire network.
New RFP Proposal for various projects (SOW, Manpower Calculation based on the
Working Hour for Cluster Tuning / Single Site Optimization etc).
Worked on different Ericsson Tools (ITK, RVA OSS, RVI, SRS, SRAN (Alarm Handling),
site Handler etc.
Work closely with the other operational team (BSS, NSS, O&M and Project) and
customer; utilize relationships to ensure that project deliveries are met in time.
Analysis of Neighbor relation & worst cells like overshooting and interfered sites with the
help of different OSS Reports (NCS, WNCS, MRR, WMRR, TP analysis).
Responsible for maintaining the all major KPI’s of 3G- Accessibility, Retainability &
Mobility.
Validation of all the major performance reports to be shared on daily basis to customer.
Successfully given sessions to team for LTE basic overview (LTE UE Attach Process
signalling, LTE call flow, LTE protocols, architecture etc.).
Successfully completed LTE KPI Performance monitoring & analysis / LTE PCI Plan /
Issues Escalated for NEWLY Integrated sites for 6 Month (Vodafone Germany Project).
Successfully completed LTE CA for Vodafone Germany Project (6 Month)
Successfully working on C-survey project for LTE Rollout, KPI acceptance on site basis.
Organization: Metro Global Services, Indonesia
Role – Tech Support-LTE on Huawei-Internux project
Worked as Tech Support for Huawei-Internux LTE networks from Dec’12 to July’13.
The regions to roll out total 2000 TD-LTE eNBs of Huawei BTS3900.
Coverage Planning, Frequency Planning, Cell ID Planning, PCI Planning, PRACH
Planning, TAC Planning and Neighbour planning.
Improving the existing PCI plan by finding PCI clashes, TAC re-dimensioning based
upon geographical UEs mobility plus network traffic load & improvement in paging
performance of the network.
Analysis of Drive Tests done by measuring Throughput, SNR, RSRP, RSRQ, Attach
Delay, handovers...
Physical Parameters Verification of new sites as per the planning data.
Primarily responsible for all KPI TEST scenarios for the performance management of
LTE Network. Test consisted of 3 point Data Uplink & Downlink, Ping Test, handovers
checking, Attached & Detached
Monitoring consistent RSRP, RSRQ and SINR parameters performance for better
coverage of the site.
Cluster & Area Optimization of LTE Sites - Defining Inter-cell neighbours &
configuration of time to trigger for successful Handovers.
Improvements investigating the new sites in the network after the integration and
scheduling drive test for network services.
4. Perform the Download and Upload throughput tests on each sector of the site and make
sure to get maximum achievable DL & UL speeds at the best point of each cell with the
best BLER, & SINR Parameter values.
Perform coverage optimization by altering antenna down-tilts (Electrical + Mechanical)
or azimuths to ensure better coverage around sites.
Identification of coverage holes in the area of interest based on Customer complaints.
Responsible for checking the radio performance for the newly integrated LTE sites
analysing drive test logs.
Having better understanding of RB, RE, LTE Call Flow, Protocol & Procedures, SON,
ANR etc, Accessibility KPI’s.
Project Huawei Indonesia / NSN Indonesia (HCPT / Indosat / Telkomsel Operator)
(January 2009 to October 2013)
Organisation (Metrotelworks , Indonesia)
Position : Sr. Solution Consultant
Job Profile:
Worked as Technical Lead for 3 operators with NSN & Huawei
More than 5000 Swap from Nokia Flexi BTS to Nokia FMR BTS, with INDOSAT
Operator in Sumatra Region (Indonesia).
3000 Sites MS Optimization with HCPT operator in Sumatra Region
Tuning various RF parameters in order to maintain the KPIs of the network for Huawei
& Nokia 2G & 3G.
Handled more than 50 Optimization engineers Team in Indonesia.
Worked on Common ABIS feature, GEMINI Technology.
Responsibility for RF team building and successful completion of RF roll out in all
respect (RF Design, RF Planning, RF Surveys, RF Optimization and RF Acceptance Test)
with in the given time frame.
Work closely with the other operational team (BSS, NSS, O&M and Project) and
customer, utilize relationships to ensure that project roll out are met in time.
Monitoring network TCH Drop Rate, SDCCH Drop Rate, TCH Blocking, SDCCH
Blocking, Handover Success Rate, TCH Assignment Success Rate, CSSR, RAB Success
rate, RRC Connection Setup Rate, Cell Availability, TBF Establishment success rate, TBF
Completion rate, TBF drop Rate , ISHO PS, IRAT HO , CSSR CS, CSSR PS, CE
Rebalancing, Call Blocking , Power Congestion etc.
BTS-BSC Re-homing Plan, preparation of the necessary BTS parameters, and parameter
audit after every re-homing activity.
Daily analysis of Nokia cell doctor reports for proper functioning of the network.
Technical support on Optimization and planning to team to achieve desired targets for
KPI.
Provide technical guidelines and suggestions to customers.
KPI Maintaining. Monitoring daily stats and optimizing the network to increase the Call
Setup Success rate and Call success rate and Handover success rate.
Frequency planning, Neighbor list Planning, BSIC Planning, Location area definition.
5. Parameters fine-tuning, Handover parameters and Power control parameters,
Optimization to increase the network quality and Grade of Service.
Preparing Drive test report and coverage report and weekly network performance report.
TCH and SDCCH Reconfiguration to minimize the TCH blocking and SDCCH blocking.
Remodel the BTS parameters, channel configuration, antenna orientations and tilts.
Traffic Analysis & Performance Management
Provide support by playing a major role in the development of innovative solutions and
processes aimed at facilitating the design, integration, optimization, and ongoing system
performance of wireless networks.
Optimize system performance based on field drive test data and translations reports.
Recommend parameter and system changes to meet system performance objectives.
Maintain the Paging Success Rate KPI as per the customer target.
Primary Drive test optimization for verifying existing RSCP, pointing coverage holes and
proposal for New sites based on coverage holes.
Improved Paging Success rate for Huawei Sumatra Region from 90% to 99.2% after
doing LAC Dimensioning, SDCCH Congestion etc. Implementation Extended CCCH
Feature to improve PSR.
Handles problems like Call drop, poor RSCP, poor Ec/Io, Pilot pollution, antenna tilting.
3G RF Database planning for New Site.
Analysis of Drive test data with ACTIX/Genex Probe, Gladiator and Reporting of RF and
Network Problems like Pilot Pollution, Bad Coverage area, Drop Calls, Access Failures,
Handovers Problems(Intra Frequency, IFHO,IRAT , Low Throughput etc)
Cluster optimization & KPI’s improvement.
Physical configurations and default parameter tuning.
Project Bangladesh audit Project (Banglalink Operator) (July 2012 to November
2012)
Organisation (Metrotelworks, Indonesia)
Position – RF Optimization Engineer
Worked in Bangladesh Audit Project with PWC (Banglalink Operator) for Multi-
Vendor (Nokia, Huawei, Siemens & Ericsson).
Submitted the Audit Report for 15 cities based on Drive test Analysis (Coverage) &
OSS KPI analysis.
Audit based on Traffic Optimization (Sudden Traffic Degradation / Increment), Half
rate & Traffic sharing parameter proposals.
Proposal for the changing the DATA parameters to improve 2G throughput.
Proposal for Network planning requirements have to take into account internal
interference on GSM band and consider adding more DCS TRXs in a site compared
to GSM
Proposal for new Rollout sites based on (Distribute same antenna types in a
particular cluster to avoid possible Ping-Pong handovers, uneven traffic distribution
and interference)
Proposal for calculation of overshooting cells (5% of samples from a TA greater than
1 of average site distance should be taken as the criteria for calculating Overshooting
cells in the dense cluster of City).
Proposal for Power control parameter for more fine Tuning.
6. Proposal for aggressive load sharing techniques in highly blocked cells which are
surrounded by underutilized neighbors.
Proposal for LAC dimensioning based Low Paging Success rate and High Paging
Deletion.
Project IDEA SWAP (UP West Circle) (June 2007 to August 2008)
Organization: Metrotelworks, Meerut
Achievement: Appreciation certificate from NSN for excellent work on Fastest Swap project
Idea-NSN-UP.
Solution and support for all Planning and Optimization deliverables for Idea NSN-UP-
Swap Creating the telecom world record of fastest swap of 500 sites within 45 days)
Responsible for all planning and optimization for Idea-NSN-UP Swap project.
Mapping of Siemens to Nokia parameter, for IDEA-NSN-UP swap project.
Preparing parameter mapping and KPI formulas from Siemens to Nokia system under
Idea-NSN-UP Swap Project.
Preparing Nokia site database for Swap sites including Dual band sites and post
optimization for the same.
Network Performance Analysis using KPI’s which includes, Drop Call Rate, Setup
Failures and Call Setup Rate, Parameters Planning.
Alarms monitoring: Active alarms, alarm history and BSC Alarms including transmission
alarms.
Diagnose all RF related problems and provide solution either parametric or hard.
Analysis of reports (ND Reports, GOS, CGR utilization, NSS report) in some and taking
corrective action to achieve target KPI agreed with customer.
Planned and Prepared all Swap database along with dual band, mapped with pre
Siemens data and optimization process.
Provide and apply all possible solution to improve KPIs to the achievable targets and
exclusions as per applicable.
Project IDEA MS Optimization (6 cities) (UP East Circle) (August 2008 to
December 2008)
Organization: Metrotelworks, Lucknow
Solution and support for all Optimization deliverables for Idea NSN-UP-East 6 cities.
Successfully achieved all the OSS Voice & Data KPI’s on time.
Work closely with the other operational team (BSS, NSS, O&M and Project) and
customer, utilize relationships to ensure that project roll out are met in time.
TCH and SDCCH Reconfiguration to minimize the TCH blocking and SDCCH blocking.
Remodel the BTS parameters, channel configuration, antenna orientations and tilts.
Traffic Analysis & Performance Management
Organization: Metrotelworks Pvt Ltd, Indore (MP), Patna (Bihar).
7. Position: RF Engineer (June’ 06 to Aug’07).
RF Surveys for new sites.
Hot Spot for new site.
Drive Test Checking Main Parameter of Drive Test.
Physical Optimization of the sites (Changing Tilt, checking sector Swap, cable Swap,
Checking Frequency Plan for new site.)
8. Trainings Attended:
GSM Radio network tuning.
GSM BSS G10 Radio Network Features.
WCDMA Air Interface.
WCDMA RAN Functionality.
WCDMA Ran W10 Performance Management & Optimization.
HSPA System Techniques.
LTE Air Interface.
Radio Network Tuning of GSM.
Basic 3G/WCDMA/UMTS.
Nokia BSS-PAR training
Ericsson ECO, EDOS, ERA Training
PERSONAL INFORMATION
Father’s Name : Late Shri R.P.MODI
Date of Birth : 11 Nov 1982
Sex : Male
Nationality : Indian
Languages Known : Hindi, English
Strengths : Hardworking, Self motivated, Strong Determinant