This is an invitation for panel discussion on Durability of Concrete Structures. The event is organised by Ambuja Cement Knowledge Centre and ICI, Pune, on 28 May 2016.
The document discusses the effect of high MgO content in cement and how it can lead to delayed expansion when hydrated. Some key points:
1) MgO content above 2% in the clinker appears as free MgO (periclase) which hydrates slowly to form brucite, causing delayed expansion over time.
2) Factors that influence the autoclave expansion caused by MgO include the particle size and distribution of periclase crystals, cement fineness, cooling rate of the clinker.
3) To control expansion, the document recommends limiting MgO in the raw mix to below 2-3%, increasing iron content which stabilizes MgO, and rapidly quenching the
Slide show concrete_with_blended_cementDr J.D. Bapat
The slide show describes the proceedings of presentation made by Dr J D Bapat, during the technical meet organised by Birla Shakti Cement, at Belgaum and Hubli, in Karnataka, India. The subject was "Concrete with Blended Cement", with particular emphasis on application of Portland pozzolana cement (PPC) in concrete.
This is a slide show of an event where Dr J D Bapat made a presentation on "Introduction to Non-Destructive Testing". The event was the National Conference on "Recent Advances in Testing of Materials, NDT & Numerical Modeling " 19 March 2016, organised by Pravara Rural Engineering College, Loni, Maharashtra, India. Dr Bapat was invited as the Chief Guest and the keynote speaker. The presentation covered different methods of non-destructive testing and their application in the industry.
Petroleum coke is a byproduct of the oil refining process with a high calorific value and lower cost than coal. It can be used in cement production, with limitations on the amount used due to its high sulfur content. Using petcoke up to 24% as a substitute for existing fuel in a cement plant can maintain acceptable sulfur ratios and volatile matter levels in the clinker and coal mix, while lowering fuel costs. However, its abrasive nature and difficulty burning require modifications to equipment for effective utilization in kilns and calciners.
This document discusses nondestructive testing (NDT), which is a group of analysis techniques used in science and industry to evaluate materials, components, or systems without causing damage. Various NDT methods rely on electromagnetic radiation, sound, or inherent material properties to examine samples for flaws. Common NDT techniques mentioned include ultrasonic testing, magnetic particle inspection, dye penetrant inspection, radiographic testing, and eddy-current testing. These techniques are widely used across various industries such as aerospace, mechanical, civil, and electrical engineering.
Dr j d bapat making of_sustainable_cement_and_concreteDr J.D. Bapat
Dr J D Bapat uploaded a paper recently published in , "International e-Conference on Sustainable Development in Concrete Technology ICSDCT 2021".
Cite this: J D Bapat, "Making of Sustainable Cement and Concrete", Proceedings of International e-Conference on Sustainable Development in Concrete Technology ICSDCT 2021, Department of Civil Engineering, D Y Patil College of Engineering, Akurdi, Pune, India, 19-21 August 2021, pp 6-10
For further details, visit: https://www.drjdbapat.com/
Cement based building_materials_icr_aug2020Dr J.D. Bapat
Cite this paper: J D Bapat, Kalpana Karthikeyan, "Cement Based Building Materials", Indian Cement Review, August 2020, pp 48-51
The work on the following cement-based building materials has been covered: dry mix mortar plaster (DMM), cement-based fly ash bricks, AAC blocks and micro-concrete for concrete repair work.
FEEDBACK ON Dr J D BAPAT'S TRAINING COURSE ON CONCRETE AT L&TDr J.D. Bapat
This is a summary feedback obtained by L&T, India, on the training programme by Dr J D Bapat on, "Durable Concrete with Mineral Admixtures", conducted at L&T's Leadership Development Academy, Lonavala, Maharashtra, India, on 6 April 2018
The document discusses the effect of high MgO content in cement and how it can lead to delayed expansion when hydrated. Some key points:
1) MgO content above 2% in the clinker appears as free MgO (periclase) which hydrates slowly to form brucite, causing delayed expansion over time.
2) Factors that influence the autoclave expansion caused by MgO include the particle size and distribution of periclase crystals, cement fineness, cooling rate of the clinker.
3) To control expansion, the document recommends limiting MgO in the raw mix to below 2-3%, increasing iron content which stabilizes MgO, and rapidly quenching the
Slide show concrete_with_blended_cementDr J.D. Bapat
The slide show describes the proceedings of presentation made by Dr J D Bapat, during the technical meet organised by Birla Shakti Cement, at Belgaum and Hubli, in Karnataka, India. The subject was "Concrete with Blended Cement", with particular emphasis on application of Portland pozzolana cement (PPC) in concrete.
This is a slide show of an event where Dr J D Bapat made a presentation on "Introduction to Non-Destructive Testing". The event was the National Conference on "Recent Advances in Testing of Materials, NDT & Numerical Modeling " 19 March 2016, organised by Pravara Rural Engineering College, Loni, Maharashtra, India. Dr Bapat was invited as the Chief Guest and the keynote speaker. The presentation covered different methods of non-destructive testing and their application in the industry.
Petroleum coke is a byproduct of the oil refining process with a high calorific value and lower cost than coal. It can be used in cement production, with limitations on the amount used due to its high sulfur content. Using petcoke up to 24% as a substitute for existing fuel in a cement plant can maintain acceptable sulfur ratios and volatile matter levels in the clinker and coal mix, while lowering fuel costs. However, its abrasive nature and difficulty burning require modifications to equipment for effective utilization in kilns and calciners.
This document discusses nondestructive testing (NDT), which is a group of analysis techniques used in science and industry to evaluate materials, components, or systems without causing damage. Various NDT methods rely on electromagnetic radiation, sound, or inherent material properties to examine samples for flaws. Common NDT techniques mentioned include ultrasonic testing, magnetic particle inspection, dye penetrant inspection, radiographic testing, and eddy-current testing. These techniques are widely used across various industries such as aerospace, mechanical, civil, and electrical engineering.
Dr j d bapat making of_sustainable_cement_and_concreteDr J.D. Bapat
Dr J D Bapat uploaded a paper recently published in , "International e-Conference on Sustainable Development in Concrete Technology ICSDCT 2021".
Cite this: J D Bapat, "Making of Sustainable Cement and Concrete", Proceedings of International e-Conference on Sustainable Development in Concrete Technology ICSDCT 2021, Department of Civil Engineering, D Y Patil College of Engineering, Akurdi, Pune, India, 19-21 August 2021, pp 6-10
For further details, visit: https://www.drjdbapat.com/
Cement based building_materials_icr_aug2020Dr J.D. Bapat
Cite this paper: J D Bapat, Kalpana Karthikeyan, "Cement Based Building Materials", Indian Cement Review, August 2020, pp 48-51
The work on the following cement-based building materials has been covered: dry mix mortar plaster (DMM), cement-based fly ash bricks, AAC blocks and micro-concrete for concrete repair work.
FEEDBACK ON Dr J D BAPAT'S TRAINING COURSE ON CONCRETE AT L&TDr J.D. Bapat
This is a summary feedback obtained by L&T, India, on the training programme by Dr J D Bapat on, "Durable Concrete with Mineral Admixtures", conducted at L&T's Leadership Development Academy, Lonavala, Maharashtra, India, on 6 April 2018
Orissa High Court Arbitration Centre RegistrationDr J.D. Bapat
Dr J D Bapat is an engineer arbitrator, mediator and domain expert. He is a fellow of Indian Council of Arbitration (FICA). This file is related to his registration as arbitrator at the arbitration centre of Hon. High Court of Orissa, Cuttack (India). Earlier, he has been registered as arbitrator at the arbitration centre of of the Hon. Punjab and Haryana High Court, Chandigarh (India).
Dr j d bapat_arbitrator_punjab_haryana_high_court_registrationDr J.D. Bapat
Dr J D Bapat is an engineer arbitrator and domain expert. He is a fellow of Indian Council of Arbitration (FICA). This file is related to his approval as arbitrator at Punjab and Haryana High Court at Chandigarh.
Dr J D Bapat_Academic_Adviser_Expertise_SummaryDr J.D. Bapat
The Table summarises the expertise earned by Dr J D Bapat, as Academic Adviser, Since 1975 onward. It gives a summary of his experience in reputed national industrial research organisation, very senior position in the industry, as professor and administrator in highly reputed university and as a development professional consultant.
This is a presentation made by Dr J D Bapat, during his talk on the "Durability of Concrete", on the Foundation Day of Indian Concrete Institute, Pune Centre, India. The presentation includes the role played by the mineral admixtures in imparting the strength and durability to concrete. It also mentions different mechanisms of the deterioration of concrete.
Dr. J.D. Bapat has over 43 years of experience in engineering education, including industrial research and development, university teaching and administration, and industry consulting. He offers his services to educational institutions in areas such as teaching, research, laboratory development, industry partnerships, quality accreditation, teaching and faculty development, student skills, and dispute resolution. His website provides more information on his qualifications and experience in engineering education.
Dr J D Bapat_ICA Empanelment and Fellowship (FICA) Dr J.D. Bapat
Dr J D Bapat is a life member of Indian Council of Arbitration (ICA). He has been conferred with the fellowship of ICA (FICA) and also empanelled as arbitrator under the category of 'Engineers'
Dr J D Bapat: Indian Council of Arbitration: Life MembershipDr J.D. Bapat
Arbitration is settlement of a dispute (whether of fact, law, or procedure) between parties to a contract by a neutral third party (the arbitrator) without resorting to court action. Dr J D Bapat has been awarded life membership of Indian Council of Arbitration (ICA). Dr J D Bapat is also an engineer. Hence he can play effective role in settlement of disputes, related to technical and commercial aspects, in the engineering field. Especially, with his vast experience in the areas of cement manufacturing, cement machinery manufacturing, concrete and higher education, Dr Bapat can now effectively participate in the arbitration activities, for the settlement of disputes outside the court, in these areas.
Dr. J D Bapat gave a presentation at a workshop on concrete mix design organized by Sanjivani College of Engineering. The presentation discussed the durability of concrete when using mineral admixtures like fly ash. Over 120 students and faculty attended the workshop and asked questions about topics like internal curing, converting rice husk to ash, translucent concrete, and reasons for stickiness when fly ash replacement is high. Dr. Bapat also announced a two-day training course on durable, high performance cement and concrete with mineral and chemical admixtures regularly held in Pune and other locations.
Four main low-carbon technologies for cement production are presented, namely (a) alternative fuels (AF) for kiln, (b) renewable energy alternatives, (c) increasing cement replacement by fly ash and blast furnace slag and (d) Portland limestone cement.
The following futuristic trends are highlighted:
(a) Alternative Fuels
(b) Limestone Conservation
(c) Cement and Concrete
(d) CO2 Sequestration with Microalgae
Cement and Concrete: Promise of Fly AshDr J.D. Bapat
The presentation made by Dr J D Bapat illustrates the importance of fly ash utilisation. The slides depict how fly ash is used in cement and concrete to improve its strength and durability.
In India, majority of cement produced is of blended variety, with fly ash and blast furnace slag as the mineral admixtures used for blending. Blended cements production reduces clinker production thereby leading to conservation of natural resources and energy and also substantial reduction in the CO2 generation, which is a green house gas. The production of blended cements also leads to utilization of two major industrial wastes, coming from thermal power stations and the integrated steel plants. The application of blended cement in concrete imparts better strength and durability properties to the structure. Keeping these aspects in mind, the presentation illustrates the characteristics of two varieties of blended cements, new to Indian cement industry, namely Portland Limestone Cement (PLC) and Portland High Volume fly Ash Cement (PHFC).
ICI-JDB Certificate of Training in Durability of Concrete (C-TDC) Dr J.D. Bapat
The duration and content of course is tailor-made to suit the requirement of participants. It can organised at Pune (India) or other place in India or abroad.
The course relates to how durability of concrete is achieved by properly incorporating mineral admixtures in cement and concrete. It includes the aspects related to the manufacturing and processing, physical characteristics, chemical and mineralogical composition, quality control of the mineral admixture and the reported experiences as well as the
provisions of national Standards on its addition to
cement and concrete. The course includes, group discussions, videos and question-answer sessions.
Useful for engineers working at construction site and interested in learning optimum utilisation of mineral admixtures for strength and durability. Marketing engineers, who frequently face customer queries regarding benefits of blended cement or admixtures. Engineers working on product development. Students/researchers interested in pursuing studies in the
area.
DURABLE CONCRETE WITH MINERAL ADMIXTURES: TRAINING COURSE IN MALAYSIA: BY Dr ...Dr J.D. Bapat
The objective of the training programme is to impart deeper knowledge about the contribution of mineral admixtures in improving strength and durability of concrete. It should equip the practicing engineer make better choice of the type and quality of mineral admixture in concrete mix to optimize the cost on one hand, and build structures with greater reliability, on the other. The engineers on site, with the knowledge on the impact of environmental factors that are responsible for distress and deterioration of structures, shall be in a position to take appropriate preventive measures.
WHO SHOULD ATTEND
Engineers working at construction site and interested in learning optimum utilisation of mineral admixtures for strength and durability.
Marketing engineers working with cement, concrete and admixture industry, which frequently face customer queries regarding benefits of blended cement or admixtures.
Engineers working on product development.
Students/researchers interested in pursuing studies in the area.
Dr J D Bapat, the author of this slide show, has nearly four decades experience in research and development, teaching, training and consultancy. Based on his experience as the head of engineering institutions, he has prepared this slide show to show how the quality of engineering institutions could be substantially improved, following systems approach to the quality management. The focus is on improving the overall quality and building the image of the institution, developing the infrastructure, faculty and the students.
The benefits are seen in terms of accreditation, certification, organised campus, better infrastructure, quality faculty with high motivation, good students seeking admission, good university results with rank-holders, placements in reputed organisations and revenue generation through sponsored research, consultancy, testing and training.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Orissa High Court Arbitration Centre RegistrationDr J.D. Bapat
Dr J D Bapat is an engineer arbitrator, mediator and domain expert. He is a fellow of Indian Council of Arbitration (FICA). This file is related to his registration as arbitrator at the arbitration centre of Hon. High Court of Orissa, Cuttack (India). Earlier, he has been registered as arbitrator at the arbitration centre of of the Hon. Punjab and Haryana High Court, Chandigarh (India).
Dr j d bapat_arbitrator_punjab_haryana_high_court_registrationDr J.D. Bapat
Dr J D Bapat is an engineer arbitrator and domain expert. He is a fellow of Indian Council of Arbitration (FICA). This file is related to his approval as arbitrator at Punjab and Haryana High Court at Chandigarh.
Dr J D Bapat_Academic_Adviser_Expertise_SummaryDr J.D. Bapat
The Table summarises the expertise earned by Dr J D Bapat, as Academic Adviser, Since 1975 onward. It gives a summary of his experience in reputed national industrial research organisation, very senior position in the industry, as professor and administrator in highly reputed university and as a development professional consultant.
This is a presentation made by Dr J D Bapat, during his talk on the "Durability of Concrete", on the Foundation Day of Indian Concrete Institute, Pune Centre, India. The presentation includes the role played by the mineral admixtures in imparting the strength and durability to concrete. It also mentions different mechanisms of the deterioration of concrete.
Dr. J.D. Bapat has over 43 years of experience in engineering education, including industrial research and development, university teaching and administration, and industry consulting. He offers his services to educational institutions in areas such as teaching, research, laboratory development, industry partnerships, quality accreditation, teaching and faculty development, student skills, and dispute resolution. His website provides more information on his qualifications and experience in engineering education.
Dr J D Bapat_ICA Empanelment and Fellowship (FICA) Dr J.D. Bapat
Dr J D Bapat is a life member of Indian Council of Arbitration (ICA). He has been conferred with the fellowship of ICA (FICA) and also empanelled as arbitrator under the category of 'Engineers'
Dr J D Bapat: Indian Council of Arbitration: Life MembershipDr J.D. Bapat
Arbitration is settlement of a dispute (whether of fact, law, or procedure) between parties to a contract by a neutral third party (the arbitrator) without resorting to court action. Dr J D Bapat has been awarded life membership of Indian Council of Arbitration (ICA). Dr J D Bapat is also an engineer. Hence he can play effective role in settlement of disputes, related to technical and commercial aspects, in the engineering field. Especially, with his vast experience in the areas of cement manufacturing, cement machinery manufacturing, concrete and higher education, Dr Bapat can now effectively participate in the arbitration activities, for the settlement of disputes outside the court, in these areas.
Dr. J D Bapat gave a presentation at a workshop on concrete mix design organized by Sanjivani College of Engineering. The presentation discussed the durability of concrete when using mineral admixtures like fly ash. Over 120 students and faculty attended the workshop and asked questions about topics like internal curing, converting rice husk to ash, translucent concrete, and reasons for stickiness when fly ash replacement is high. Dr. Bapat also announced a two-day training course on durable, high performance cement and concrete with mineral and chemical admixtures regularly held in Pune and other locations.
Four main low-carbon technologies for cement production are presented, namely (a) alternative fuels (AF) for kiln, (b) renewable energy alternatives, (c) increasing cement replacement by fly ash and blast furnace slag and (d) Portland limestone cement.
The following futuristic trends are highlighted:
(a) Alternative Fuels
(b) Limestone Conservation
(c) Cement and Concrete
(d) CO2 Sequestration with Microalgae
Cement and Concrete: Promise of Fly AshDr J.D. Bapat
The presentation made by Dr J D Bapat illustrates the importance of fly ash utilisation. The slides depict how fly ash is used in cement and concrete to improve its strength and durability.
In India, majority of cement produced is of blended variety, with fly ash and blast furnace slag as the mineral admixtures used for blending. Blended cements production reduces clinker production thereby leading to conservation of natural resources and energy and also substantial reduction in the CO2 generation, which is a green house gas. The production of blended cements also leads to utilization of two major industrial wastes, coming from thermal power stations and the integrated steel plants. The application of blended cement in concrete imparts better strength and durability properties to the structure. Keeping these aspects in mind, the presentation illustrates the characteristics of two varieties of blended cements, new to Indian cement industry, namely Portland Limestone Cement (PLC) and Portland High Volume fly Ash Cement (PHFC).
ICI-JDB Certificate of Training in Durability of Concrete (C-TDC) Dr J.D. Bapat
The duration and content of course is tailor-made to suit the requirement of participants. It can organised at Pune (India) or other place in India or abroad.
The course relates to how durability of concrete is achieved by properly incorporating mineral admixtures in cement and concrete. It includes the aspects related to the manufacturing and processing, physical characteristics, chemical and mineralogical composition, quality control of the mineral admixture and the reported experiences as well as the
provisions of national Standards on its addition to
cement and concrete. The course includes, group discussions, videos and question-answer sessions.
Useful for engineers working at construction site and interested in learning optimum utilisation of mineral admixtures for strength and durability. Marketing engineers, who frequently face customer queries regarding benefits of blended cement or admixtures. Engineers working on product development. Students/researchers interested in pursuing studies in the
area.
DURABLE CONCRETE WITH MINERAL ADMIXTURES: TRAINING COURSE IN MALAYSIA: BY Dr ...Dr J.D. Bapat
The objective of the training programme is to impart deeper knowledge about the contribution of mineral admixtures in improving strength and durability of concrete. It should equip the practicing engineer make better choice of the type and quality of mineral admixture in concrete mix to optimize the cost on one hand, and build structures with greater reliability, on the other. The engineers on site, with the knowledge on the impact of environmental factors that are responsible for distress and deterioration of structures, shall be in a position to take appropriate preventive measures.
WHO SHOULD ATTEND
Engineers working at construction site and interested in learning optimum utilisation of mineral admixtures for strength and durability.
Marketing engineers working with cement, concrete and admixture industry, which frequently face customer queries regarding benefits of blended cement or admixtures.
Engineers working on product development.
Students/researchers interested in pursuing studies in the area.
Dr J D Bapat, the author of this slide show, has nearly four decades experience in research and development, teaching, training and consultancy. Based on his experience as the head of engineering institutions, he has prepared this slide show to show how the quality of engineering institutions could be substantially improved, following systems approach to the quality management. The focus is on improving the overall quality and building the image of the institution, developing the infrastructure, faculty and the students.
The benefits are seen in terms of accreditation, certification, organised campus, better infrastructure, quality faculty with high motivation, good students seeking admission, good university results with rank-holders, placements in reputed organisations and revenue generation through sponsored research, consultancy, testing and training.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...