Alpesh Laxmikant Shah is an electrical engineer currently working as an electrical substation project tendering, estimation, design engineering and coordination engineer in Kuwait. He has over 13 years of experience in engineering design, project management, and training. Shah holds a Bachelor's degree in electrical engineering and has received additional training in AutoCAD, electrical drawings, and quality auditing.
Shah Alpesh Laxmikant is an electrical engineer currently working as an electrical substation project tendering, estimation, design, QA engineering and coordination engineer in Kuwait. He has over 13 years of experience in engineering roles for companies in India and Kuwait. He holds a Bachelor's degree in electrical engineering and provides training and auditing services in addition to his engineering responsibilities.
The document outlines the job experience and responsibilities of M. A. Masud Khan. It details his experience as Manager Grade-2 at Sena Kalyan Electric Industries from 2016 to present where his responsibilities include designing transformers, preparing documents for ISO certification, and developing relationships with energy companies. It also outlines his prior experience as Assistant Manager and Deputy Manager at the same company where he was responsible for transformer design, quality control, and preparing tender documents.
Akarshit Consulting Engineers provides electrical consulting services including design, project management, and consultation. It was founded in 2012 and is located in Hyderabad, India. The company's services include internal and external electrical systems design up to 33kV, lighting design, generator sets, UPS systems, IT infrastructure, and more. It has experience with various types of building projects including offices, universities, stadiums, and more.
Bachelor's degree (electrical engineer(mep) 6 years of experience-mohammed fa...Mohammed Fazaluddin
Mohammed Fazaluddin is an electrical engineer with over 5 years of experience in construction and installation of substations, transmission and distribution lines in India. He has 1.5 years of experience in Dubai designing and executing MEP projects for buildings. He holds a Bachelor's degree in Electrical Engineering and has skills in project management, AutoCAD, safety procedures, and electrical design and calculations. He is seeking new opportunities and is willing to relocate.
1. Santosh Kumar Singh is a Deputy Manager with over 8 years of experience in infrastructure projects. He has expertise in designing, installing, and commissioning electrical substations and transmission lines.
2. He is currently working as the Deputy Manager - Electrical at Jal Power Corporation Ltd, where he supervises the construction, testing, and maintenance of electrical infrastructure for power projects.
3. Singh has a Post Graduate Certificate in Hydro Power Engineering and a Bachelor's Degree in Electrical and Electronics Engineering. He is seeking a new position to further utilize his skills in project execution and management.
- The document contains the resume of Alak Kumar De, who has over 40 years of experience in project engineering, fire alarm, and fire protection systems.
- He has worked as the business in-charge at Equipments & Services (India) since 2009, where he is responsible for business development, project management, and system design.
- Prior to that, he worked at DE's Technico for over 30 years where he took on increasing responsibilities in engineering, production management, and eventually became the business director.
Rajkumar A is seeking a position as a Project Manager - MEP that utilizes his 13 years of experience managing electrical, HVAC, fire protection, and building management systems projects. He has managed projects for companies such as ITC Limited, BT, Tektronics, and Dell that ranged in size from 26,000 square feet to 525,000 square feet. As project manager, his responsibilities included cost estimation, scheduling, vendor management, and ensuring quality and safety standards were met. He holds a Bachelor's degree in Electrical and Electronics Engineering.
Shah Alpesh Laxmikant is an electrical engineer currently working as an electrical substation project tendering, estimation, design, QA engineering and coordination engineer in Kuwait. He has over 13 years of experience in engineering roles for companies in India and Kuwait. He holds a Bachelor's degree in electrical engineering and provides training and auditing services in addition to his engineering responsibilities.
The document outlines the job experience and responsibilities of M. A. Masud Khan. It details his experience as Manager Grade-2 at Sena Kalyan Electric Industries from 2016 to present where his responsibilities include designing transformers, preparing documents for ISO certification, and developing relationships with energy companies. It also outlines his prior experience as Assistant Manager and Deputy Manager at the same company where he was responsible for transformer design, quality control, and preparing tender documents.
Akarshit Consulting Engineers provides electrical consulting services including design, project management, and consultation. It was founded in 2012 and is located in Hyderabad, India. The company's services include internal and external electrical systems design up to 33kV, lighting design, generator sets, UPS systems, IT infrastructure, and more. It has experience with various types of building projects including offices, universities, stadiums, and more.
Bachelor's degree (electrical engineer(mep) 6 years of experience-mohammed fa...Mohammed Fazaluddin
Mohammed Fazaluddin is an electrical engineer with over 5 years of experience in construction and installation of substations, transmission and distribution lines in India. He has 1.5 years of experience in Dubai designing and executing MEP projects for buildings. He holds a Bachelor's degree in Electrical Engineering and has skills in project management, AutoCAD, safety procedures, and electrical design and calculations. He is seeking new opportunities and is willing to relocate.
1. Santosh Kumar Singh is a Deputy Manager with over 8 years of experience in infrastructure projects. He has expertise in designing, installing, and commissioning electrical substations and transmission lines.
2. He is currently working as the Deputy Manager - Electrical at Jal Power Corporation Ltd, where he supervises the construction, testing, and maintenance of electrical infrastructure for power projects.
3. Singh has a Post Graduate Certificate in Hydro Power Engineering and a Bachelor's Degree in Electrical and Electronics Engineering. He is seeking a new position to further utilize his skills in project execution and management.
- The document contains the resume of Alak Kumar De, who has over 40 years of experience in project engineering, fire alarm, and fire protection systems.
- He has worked as the business in-charge at Equipments & Services (India) since 2009, where he is responsible for business development, project management, and system design.
- Prior to that, he worked at DE's Technico for over 30 years where he took on increasing responsibilities in engineering, production management, and eventually became the business director.
Rajkumar A is seeking a position as a Project Manager - MEP that utilizes his 13 years of experience managing electrical, HVAC, fire protection, and building management systems projects. He has managed projects for companies such as ITC Limited, BT, Tektronics, and Dell that ranged in size from 26,000 square feet to 525,000 square feet. As project manager, his responsibilities included cost estimation, scheduling, vendor management, and ensuring quality and safety standards were met. He holds a Bachelor's degree in Electrical and Electronics Engineering.
Sudarsan Boopathi is an electrical engineer seeking a position utilizing his 6 years of experience in estimation engineering. He has worked on projects in Oman and India, including substations, transmission lines, solar installations, and wind turbine maintenance. Boopathi has a background in electrical testing, design, project execution, and operations and maintenance. He holds an MBA in human resources and a bachelor's degree in electrical engineering.
1) Anandkumar Shah is an experienced Electrical Engineer seeking a challenging position in a growing organization.
2) He has over 9 years of experience in project management, design, engineering, inspection, and maintenance of oil and gas and refinery projects.
3) He is proficient in AutoCAD, MS Office, and has strong communication, relationship building, and problem solving skills.
Syed Asif Ali is applying for an electrical engineering position. He has a B.Tech degree in electrical and electronics engineering from Jawaharlal Nehru Technological University. He has over 3 years of experience working on electrical projects in Saudi Arabia, including as a technical electrical engineer, electrical coordinator, and maintenance project incharge. His responsibilities have included preparing submittals, attending meetings, and coordinating electrical work. He also has 2 years of prior experience in India as an electrical engineer with First Point Constructions.
Janardan Pratap Singh Dubey is seeking a senior manager position with over 10 years of experience in electrical engineering projects, operations and maintenance, testing, and teaching. He has a master's degree in high voltage engineering and relevant work experience planning, designing, supervising and maintaining transmission lines, substations, and industrial distribution systems. His specialized areas include project management, training, high voltage testing, and electrical consultancy.
Aritra Ghosh is an electrical and instrumentation engineer with over 5 years of experience working for Bhushan Power and Steel Limited. He has successfully led several projects, including implementing burner management systems and automation. Currently, he is working on automation projects for the blast furnace and recovery coke oven. He has expertise in electrical equipment commissioning, automation system development, and establishing communication protocols like Profibus. His skills include working with PLCs, DCS, drives, panels and motors of various voltages. He aims to complete projects on schedule through technical competency and leadership.
- E. Shajahan is seeking a challenging position in electrical and electronics engineering with over 5 years of experience in maintenance, supervision, and engineering.
- He has a Bachelor's degree in Electrical and Electronics Engineering and is proficient in AutoCAD, C++, Java, and Microsoft Office.
- His work experience includes positions as an electrical maintenance supervisor and technician in India and currently as an electrical engineer in Saudi Arabia, where he maintains and troubleshoots various electrical systems and equipment.
Terence Anderson is an experienced electrical engineer and project manager with over 35 years of experience managing electrical projects and systems. He has extensive experience managing electrical operations and maintenance projects for the Department of Defense and Social Security Administration. Currently he is the Facility Transition and Warranty Manager for a large DOD data center. Previously he was the Lead Project Engineer for a $60 million telecommunications project after the 9/11 attack on the Pentagon. He holds an MBA and BS in Electrical Engineering.
This document contains the resume of Romeo Idris Hutabarat. It includes his personal details such as age, address, education history and qualifications. It also lists his professional experience in various roles such as Commissioning Technician, E&I Inspector, Engineer and Technician for companies in the oil and gas industry. His experiences include tasks such as inspection, testing, commissioning and troubleshooting of electrical systems. The document also outlines his skills, languages and references.
Biswajyoti Swain has over 23 years of experience in power generation, power transformers manufacturing, and power distribution. He is currently the General Manager (Electrical) at O.P. Jindal Super Thermal Power Plant in Raigarh, Chhattisgarh, India. Previously he has worked as the Manager (Electrical) at Alfa Transformers Ltd. manufacturing transformers, and as a team member at AES-CESCO in power distribution. He has strong expertise in project execution, maintenance, quality assurance, and commissioning of electrical equipment up to 400kV in power plants and transformers up to 250MVA, 220kV.
Ajay Kumar is seeking a career in modern technologies and has over 5 years of experience in electrical engineering roles. He has worked on projects involving electrical machinery procurement, erection, commissioning, and maintenance. He is proficient in PLC programming, robotics, and maintaining high plant uptime. Ajay holds a B.Tech in Electrical Engineering and has received several awards for his technical achievements.
This document provides a curriculum vitae for Shyam Sevak Gupta, an electrical engineer with over 23 years of experience in electrical and instrumentation engineering for EPC projects. It lists his educational background, including a B.Tech in Electrical Engineering, and details his career history working for various engineering companies on projects in industries like metals, materials handling, and water treatment. It provides summaries of the roles, responsibilities, and technical expertise gained through his various positions on projects in India.
Atinda Euggine is an electrical and renewable energy expert with over 5 years of experience in projects related to oil and gas, power generation, smart solutions, and solar energy across East Africa. He has extensive experience in engineering design, construction supervision, project management, and solving complex technical problems. He holds professional licenses from the Energy Regulatory Commission of Kenya.
Darshankumar Trivedi is seeking an electrical engineer position and has over 3 years of experience implementing large control system projects. He has skills in PLC, HMI, and DCS programming as well as AutoCAD. His experience includes developing control systems for ExxonMobil and Constellation Energy. He has a Master's degree in Electrical Engineering from Lamar University.
The document is a resume submitted by Arman Alam for a position as an HVAC Engineer. It summarizes his educational qualifications including a Bachelor's degree in Mechanical Engineering, over 3 years of work experience in HVAC design and drafting roles, and his technical skills in areas such as heat load calculation, duct design, and AutoCAD. It also lists his responsibilities and accomplishments on various HVAC projects for commercial buildings.
Rajesh Lande is seeking assignments in engineering design, project management, or quality audit roles, preferably related to cement or power projects. He has over 23 years of experience managing and executing cement and power plant projects. Currently he is the Deputy General Manager of Engineering and Instrumentation at Dalmia Cement Bharat Limited, where he is responsible for project planning, equipment selection, design, procurement, and commissioning.
Mohammed Hussein Hasan Mustafa is seeking a challenging opportunity to fully utilize his skills. He has a Bachelor's Degree in Mechatronics Engineering from Al-Balqa Applied University. He has worked as an Electrical Site Engineer at Yassin kfaween and partner company since 2014. He has skills in AutoCAD, LabVIEW, MATLAB, Microsoft Office, electrical installation, control systems, building management systems, low current systems, and electric drive systems.
Shabbir Ahmad has over 28 years of experience in fire and security projects. He has extensive experience managing all aspects of projects from planning and cost estimation to installation, testing, and commissioning. Some of the major projects he has worked on include fire detection systems at various power plants, oil and gas facilities, airports, and other industrial sites. He is proficient in various fire and life safety systems and has a proven track record of successfully delivering multiple projects on schedule and within budget.
The resume is for Tanmoy Adhikary, who has over 6 years of experience in process automation. He currently works as an Officer of Instrumentation at Jamshedpur Continuous Annealing & Processing Company Pvt. Ltd., where he is responsible for maintaining instrumentation across the plant. Prior to this, he worked as a Project Engineer for Steam & Control Systems Pvt. Ltd., where he designed boiler automation systems. He holds a Diploma in Instrumentation Engineering and has experience calibrating instruments in various industries.
Akhileshwar Nath Singh is seeking a career that utilizes his 5 years of experience in electrical and industrial automation projects. He currently works as a Design & Testing Engineer at Mettler Toledo India Pvt Ltd, where he is responsible for planning, designing, and implementing electrical systems and automation for automated machinery. He has expertise in PLC programming, electrical schematic design, control panel design, hazardous area applications, and industrial automation. He has worked on projects for clients like Nestle, DRL, Cadbury, Lanxess, ITC, and others.
Todd Calvert is seeking a position as a senior controls engineer. He has over 25 years of experience programming PLCs, HMIs, and industrial control systems across various industries. His background includes experience with Allen-Bradley, Modicon, Eaton, Omron, Mitsubishi, Siemens, Yaskawa, and Square D control systems. Currently he works as a controls engineer for Honda configuring and troubleshooting their ActivPlant factory software system.
Electrical Engineer with 7 years of Experience in Expediting of Refinery Expansion Projects & Inspection of Electrical and Instrumentation Equipment’s, working with the objectives and Targets aimed at the achievements of the Company’s short and long term.
The document is a curriculum vitae for Thowfic Ahamed Abbas, an electrical engineer from India with over 7 years of experience in roles such as electrical handover engineer and QA/QC engineer for projects in Qatar. It details his professional experience on projects in Qatar, education including a diploma in electrical and electronics engineering and bachelor's degree in electrical engineering, skills in AutoCAD and Microsoft Office, and references.
Sudarsan Boopathi is an electrical engineer seeking a position utilizing his 6 years of experience in estimation engineering. He has worked on projects in Oman and India, including substations, transmission lines, solar installations, and wind turbine maintenance. Boopathi has a background in electrical testing, design, project execution, and operations and maintenance. He holds an MBA in human resources and a bachelor's degree in electrical engineering.
1) Anandkumar Shah is an experienced Electrical Engineer seeking a challenging position in a growing organization.
2) He has over 9 years of experience in project management, design, engineering, inspection, and maintenance of oil and gas and refinery projects.
3) He is proficient in AutoCAD, MS Office, and has strong communication, relationship building, and problem solving skills.
Syed Asif Ali is applying for an electrical engineering position. He has a B.Tech degree in electrical and electronics engineering from Jawaharlal Nehru Technological University. He has over 3 years of experience working on electrical projects in Saudi Arabia, including as a technical electrical engineer, electrical coordinator, and maintenance project incharge. His responsibilities have included preparing submittals, attending meetings, and coordinating electrical work. He also has 2 years of prior experience in India as an electrical engineer with First Point Constructions.
Janardan Pratap Singh Dubey is seeking a senior manager position with over 10 years of experience in electrical engineering projects, operations and maintenance, testing, and teaching. He has a master's degree in high voltage engineering and relevant work experience planning, designing, supervising and maintaining transmission lines, substations, and industrial distribution systems. His specialized areas include project management, training, high voltage testing, and electrical consultancy.
Aritra Ghosh is an electrical and instrumentation engineer with over 5 years of experience working for Bhushan Power and Steel Limited. He has successfully led several projects, including implementing burner management systems and automation. Currently, he is working on automation projects for the blast furnace and recovery coke oven. He has expertise in electrical equipment commissioning, automation system development, and establishing communication protocols like Profibus. His skills include working with PLCs, DCS, drives, panels and motors of various voltages. He aims to complete projects on schedule through technical competency and leadership.
- E. Shajahan is seeking a challenging position in electrical and electronics engineering with over 5 years of experience in maintenance, supervision, and engineering.
- He has a Bachelor's degree in Electrical and Electronics Engineering and is proficient in AutoCAD, C++, Java, and Microsoft Office.
- His work experience includes positions as an electrical maintenance supervisor and technician in India and currently as an electrical engineer in Saudi Arabia, where he maintains and troubleshoots various electrical systems and equipment.
Terence Anderson is an experienced electrical engineer and project manager with over 35 years of experience managing electrical projects and systems. He has extensive experience managing electrical operations and maintenance projects for the Department of Defense and Social Security Administration. Currently he is the Facility Transition and Warranty Manager for a large DOD data center. Previously he was the Lead Project Engineer for a $60 million telecommunications project after the 9/11 attack on the Pentagon. He holds an MBA and BS in Electrical Engineering.
This document contains the resume of Romeo Idris Hutabarat. It includes his personal details such as age, address, education history and qualifications. It also lists his professional experience in various roles such as Commissioning Technician, E&I Inspector, Engineer and Technician for companies in the oil and gas industry. His experiences include tasks such as inspection, testing, commissioning and troubleshooting of electrical systems. The document also outlines his skills, languages and references.
Biswajyoti Swain has over 23 years of experience in power generation, power transformers manufacturing, and power distribution. He is currently the General Manager (Electrical) at O.P. Jindal Super Thermal Power Plant in Raigarh, Chhattisgarh, India. Previously he has worked as the Manager (Electrical) at Alfa Transformers Ltd. manufacturing transformers, and as a team member at AES-CESCO in power distribution. He has strong expertise in project execution, maintenance, quality assurance, and commissioning of electrical equipment up to 400kV in power plants and transformers up to 250MVA, 220kV.
Ajay Kumar is seeking a career in modern technologies and has over 5 years of experience in electrical engineering roles. He has worked on projects involving electrical machinery procurement, erection, commissioning, and maintenance. He is proficient in PLC programming, robotics, and maintaining high plant uptime. Ajay holds a B.Tech in Electrical Engineering and has received several awards for his technical achievements.
This document provides a curriculum vitae for Shyam Sevak Gupta, an electrical engineer with over 23 years of experience in electrical and instrumentation engineering for EPC projects. It lists his educational background, including a B.Tech in Electrical Engineering, and details his career history working for various engineering companies on projects in industries like metals, materials handling, and water treatment. It provides summaries of the roles, responsibilities, and technical expertise gained through his various positions on projects in India.
Atinda Euggine is an electrical and renewable energy expert with over 5 years of experience in projects related to oil and gas, power generation, smart solutions, and solar energy across East Africa. He has extensive experience in engineering design, construction supervision, project management, and solving complex technical problems. He holds professional licenses from the Energy Regulatory Commission of Kenya.
Darshankumar Trivedi is seeking an electrical engineer position and has over 3 years of experience implementing large control system projects. He has skills in PLC, HMI, and DCS programming as well as AutoCAD. His experience includes developing control systems for ExxonMobil and Constellation Energy. He has a Master's degree in Electrical Engineering from Lamar University.
The document is a resume submitted by Arman Alam for a position as an HVAC Engineer. It summarizes his educational qualifications including a Bachelor's degree in Mechanical Engineering, over 3 years of work experience in HVAC design and drafting roles, and his technical skills in areas such as heat load calculation, duct design, and AutoCAD. It also lists his responsibilities and accomplishments on various HVAC projects for commercial buildings.
Rajesh Lande is seeking assignments in engineering design, project management, or quality audit roles, preferably related to cement or power projects. He has over 23 years of experience managing and executing cement and power plant projects. Currently he is the Deputy General Manager of Engineering and Instrumentation at Dalmia Cement Bharat Limited, where he is responsible for project planning, equipment selection, design, procurement, and commissioning.
Mohammed Hussein Hasan Mustafa is seeking a challenging opportunity to fully utilize his skills. He has a Bachelor's Degree in Mechatronics Engineering from Al-Balqa Applied University. He has worked as an Electrical Site Engineer at Yassin kfaween and partner company since 2014. He has skills in AutoCAD, LabVIEW, MATLAB, Microsoft Office, electrical installation, control systems, building management systems, low current systems, and electric drive systems.
Shabbir Ahmad has over 28 years of experience in fire and security projects. He has extensive experience managing all aspects of projects from planning and cost estimation to installation, testing, and commissioning. Some of the major projects he has worked on include fire detection systems at various power plants, oil and gas facilities, airports, and other industrial sites. He is proficient in various fire and life safety systems and has a proven track record of successfully delivering multiple projects on schedule and within budget.
The resume is for Tanmoy Adhikary, who has over 6 years of experience in process automation. He currently works as an Officer of Instrumentation at Jamshedpur Continuous Annealing & Processing Company Pvt. Ltd., where he is responsible for maintaining instrumentation across the plant. Prior to this, he worked as a Project Engineer for Steam & Control Systems Pvt. Ltd., where he designed boiler automation systems. He holds a Diploma in Instrumentation Engineering and has experience calibrating instruments in various industries.
Akhileshwar Nath Singh is seeking a career that utilizes his 5 years of experience in electrical and industrial automation projects. He currently works as a Design & Testing Engineer at Mettler Toledo India Pvt Ltd, where he is responsible for planning, designing, and implementing electrical systems and automation for automated machinery. He has expertise in PLC programming, electrical schematic design, control panel design, hazardous area applications, and industrial automation. He has worked on projects for clients like Nestle, DRL, Cadbury, Lanxess, ITC, and others.
Todd Calvert is seeking a position as a senior controls engineer. He has over 25 years of experience programming PLCs, HMIs, and industrial control systems across various industries. His background includes experience with Allen-Bradley, Modicon, Eaton, Omron, Mitsubishi, Siemens, Yaskawa, and Square D control systems. Currently he works as a controls engineer for Honda configuring and troubleshooting their ActivPlant factory software system.
Electrical Engineer with 7 years of Experience in Expediting of Refinery Expansion Projects & Inspection of Electrical and Instrumentation Equipment’s, working with the objectives and Targets aimed at the achievements of the Company’s short and long term.
The document is a curriculum vitae for Thowfic Ahamed Abbas, an electrical engineer from India with over 7 years of experience in roles such as electrical handover engineer and QA/QC engineer for projects in Qatar. It details his professional experience on projects in Qatar, education including a diploma in electrical and electronics engineering and bachelor's degree in electrical engineering, skills in AutoCAD and Microsoft Office, and references.
Kaptan has over 6 years of experience as an electrical engineer. He has worked on projects in Mizoram and Uttarakhand. Currently seeking a position that allows growth and utilizes his knowledge of electrical engineering. He has experience in project monitoring, maintenance, commissioning, and quality control. Kaptan holds a diploma in electrical engineering and is proficient in Hindi, Punjabi, and English.
Kashif Ali is an electrical QA/QC engineer with over 6 years of experience. He holds a Bachelor's degree in electrical engineering and various technical diplomas. His skills include electrical design, installation, testing and commissioning. He is currently employed as an electrical QA/QC engineer on an Aramco project in Saudi Arabia.
Jagadeesh S Dambal has 8 years of experience working with Yokogawa DCS systems as a system engineer, project engineer, and commissioning engineer on projects in the Middle East and India. He has a B.Tech in electronics and telecommunications engineering and a diploma in electronics and communications engineering. His experience includes engineering, commissioning, and providing support for DCS projects in industries such as oil and gas production, refineries and power plants. He is proficient in Yokogawa DCS systems including Centum VP and CS3000 and tools like Prim tool and Generic Report Tool.
Mukesh Kumar is seeking a position as an electrical design and production engineer. He has over 2 years of experience in this role at RS Engineering and ARK Electric. His responsibilities include electrical system design, equipment selection and sizing, load calculation, cable scheduling, panel design, and testing and commissioning. He has a B.Tech in Electrical and Electronics Engineering and is proficient in AutoCAD and Microsoft Office applications.
This curriculum vitae is for Ankit Singh. He has over 2 years of experience as a Senior Engineer for a solar energy company, where he performed feasibility studies, project reports, vendor selection, and commissioning of solar energy projects. Previously, he worked for 2 years as a Mechanical Engineer for a power generation company, where he performed quality control, inspection, and assisted with fabrication and erection activities. He holds a Bachelor's degree in Mechanical Engineering and has knowledge of software like AutoCAD, MS Office, and experience with assembling and networking computers. His objective is to use his skills to help organizations achieve their goals.
This document contains the resume of Satish R. Hande. It summarizes his personal and educational details, including his BE AMIE qualification from Kolkata and diploma in electrical engineering. It outlines his 15 years of work experience in various roles, most recently as a Technical Officer at Sandoz Pvt. Ltd. It provides a brief description of his responsibilities in projects, general maintenance, and electrical maintenance of systems like chilled water plants, boilers, and air compressors.
Nishit Arvindbhai Joshi is an electrical engineer with over 5 years of experience working in design, engineering and manufacturing companies. He has experience with HV, MV and LV system design, lighting calculations, cable sizing, transformer sizing and preparing electrical drawings and documents. Currently he works as a design engineer where he is responsible for tender reviews, equipment specifications, AUTOCAD drawings, load and cable sizing calculations, and material requisitions. He also has experience working as an electrical engineer focusing on panel design, PLC programming and commissioning and maintenance of electrical systems.
Rama Rao Vepuri is an electrical engineer from India with over 16 years of experience working in construction projects in Saudi Arabia and India. He has a B.Tech in Electrical and Electronics Engineering. His experience includes working as an electrical site engineer on various industrial and commercial projects in Saudi Arabia and India, overseeing electrical installation, testing, and commissioning. He is currently working as an electrical engineer on the SPIMACO OSD EXT project in Saudi Arabia.
Akbar Sadiq Mohammad has over 14 years of experience as an electrical engineer, most recently working as a senior electrical estimation engineer for Kharaifi National in Kuwait. He holds a BE in electrical engineering from Crescent Engineering College in India. Prior to his current role, he worked as an electrical estimation engineer and project engineer on biomass power plants in India and Saudi Arabia. His responsibilities have included preparing cost estimates, coordinating suppliers, and supervising electrical installations and commissioning. He is proficient in MS Office applications and multiple languages.
G. Heama is seeking a career as an electrical and electronic engineer. He has 2 years of experience working in quality control at Whirlpool of India Ltd in Pondicherry. His responsibilities include ensuring product quality through testing, improving wash performance, validating new projects, and simulating field failures. He holds a Diploma in Electrical and Electronics Engineering, a B.Tech in the same, and is pursuing an M.Tech in Power Electronics drives and Control. He has additional qualifications in PLCs, SCADA, MATLAB and has received awards for his work.
Mohammed Farookh Navid is an instrumentation and control professional with over 11 years of experience in Gulf and India working on power plant and utility projects. He has extensive experience managing automation systems including DCS, PLC, and SCADA and has worked on large projects in Saudi Arabia. Currently he works as a Project Engineer at MARAFIQ Power & Water Utility Company reviewing technical bids and project documentation.
Govindarajan TS is a senior electrical engineer with over 12 years of experience in Qatar and the UAE. He has extensive experience designing electrical systems for high-rise buildings, hospitals, airports, infrastructure projects, TV stations, and an equestrian stadium in Qatar. He holds a B.E. in Electrical and Electronics Engineering and licenses from UPDA Qatar and Qatar Civil Defense. Currently he works as a senior electrical engineer for Qatar Electro Mechanical Group.
VIJAYABASKAR_ELECTRICAL _8YEARS_EXPERIENCEvijayabaskar v
Vijayabaskar is an electrical engineer with 8 years of experience managing electrical, control and instrumentation projects for power and gasification plants. He has a M-Tech in Electrical Drives and Control and is seeking a middle management role to further his professional development. He has extensive experience designing, managing and commissioning electrical systems and has led teams on numerous projects in India.
Gopi provides his contact information and career objective of applying experience in a challenging environment while gaining new skills. He has over 10 years of experience designing and estimating low voltage panels for various companies. His roles have included design, cost estimation, material selection, testing and commissioning. He has extensive experience with Schneider Electric products and has handled numerous industrial and commercial projects across sectors like airports, hospitals, manufacturing and more. Gopi holds a Bachelor's degree in Electrical Engineering and is proficient in design tools like E-Plan and AutoCAD.
Vinothkumar has over 2 years of experience as a Planning Engineer at M/s. V V Systems & Power Panels Pvt. Ltd. where he designs L.T control panels and power panels. He holds a B.E. in Electrical and Electronics Engineering and has expertise in AutoCAD, Revit MEP, BMS, HT and LT voltage systems. His responsibilities include preparing GA drawings, SLDs, BOQs, internal drawings, and gland punching details for various low voltage panels. He also coordinates with production and quality teams.
This resume is for Soumyajit Sarkar, seeking work as an instrumentation engineer. He has 3 years of experience in instrumentation engineering. He has a post-graduate diploma in thermal power plant engineering and a bachelor's degree in electronics and instrumentation engineering. He has worked on projects involving instrumentation design, installation, and commissioning for power and industrial plants. He is proficient in instrumentation, control systems, power plant engineering, and software like PLC programming.
Sushil Kumar Khanduri is currently working as a Senior Executive Engineer at GE Renewable Energy in Vadodara, India since 2011. He has over 25 years of experience in quality assurance and inspection roles. Previously, he worked as a Quality Control Foreman at Jai Prakash Associates Limited from 2004 to 2011 inspecting fabricated, machined, and assembled parts for hydroelectric and cement plant equipment. He also spent 13.5 years as a Senior Quality Inspector at Harig India Limited from 1990 to 2004 inspecting hydraulic equipment components. Khanduri holds a Bachelor of Science degree in Physics, Maths, and Geology and certifications in non-destructive testing.
1. BIO DATA: ELECTRICAL SUBSTATION PROJECT TENDERING –
ESTIMATION – DESIGN ENGINEERING AND CO ORDINATION
Name : SHAH ALPESH LAXMIKANT
Date of Birth : 2nd
December 1970
Permanent Address : A/2 Purushotam Nagar,
Near Subhash Park, Harni-Varasia road
Baroda - 390022, GUJARAT, INDIA
Contact Details:
Mobile : +965-65705623 (KUWAIT)
Land line : +965-25649373 (KUWAIT), +91 265 2487797(INDIA)
E Mail Address : alpeshshahindia@yahoo.com
Marital Status : Married, having two kids
Nationality : Indian
Discipline : Bachelor in Electrical Engg. (B.E. Electrical) from M.S.
University, Baroda, India with first class
PROFESSIONAL RECORD:
Name of
the Organization
Duration Position Held
Al- Ahleia Switchgear Co.,
Kuwait
October 2002 - Till Date
Electrical Project Tendering –
Estimation – Design Engineering &
Co-ordination
New Age Industries,
Baroda, India
September 2000 -
October 2002
Senior Executive
Jyoti Limited ,Baroda,
India
January 1992 - August
2000
Assistant Engineer
Shri Krishna Enterprises
Baroda, India
June 1991 - December
1991
Sales Engineer
WORK EXPERIENCE:
(A): - PRESENT ACTIVITY AT AL–AHLEIA SWITCHGEAR, KUWAIT: -
Presently working as an Electrical substation project tendering – estimation –
Design Engineering & CO-ordination Engineer for MEW,OIL & GAS Projects and
handling all engineering activities for oil sector substation projects for KOC, KNPC &
MEW substation project for packaged s/s, elevated s/s and concrete s/s as listed
below.
2. MEW primary s/s ( MEW/77, MEW/45, MEW/36) FOR 132/11KV S/S
MEW primary s/s (Siemens T61) for 400/132/11kv S/S.
MEW Ringmain s/s (MEW/T73)
KOC Elevated s/s project.
KOC Wara pressure maintenance project.
KNPC clean fuel project.
KNPC packaged s/s for flare gas.
MOH Farwaniya hospital project.
KEY HIGHLIGHTS
• Evaluating tender documents, drawings and schedules.
• Technical review of tender documents and to finalize scope of work.
• Preparation of technical tender offers.
• Preparation of code numbers for brought out item/components.
• Floating enquiries to various suppliers / Manufacturers to get quotations for
estimation purpose, based on project requirements.
• Follow up with the suppliers / Manufacturers to obtain quotations in time,
and to clarify all their queries.
• Technical evaluation and Comparison studies based on suppliers quotations.
• Negotiations with suppliers on both technical and commercial aspects of
product.
• To build relationships and liaise with customers, suppliers and vendors and
manage daily correspondence for quantities, costs and specifications.
• Preparation and submission of various technical documents such as
datasheets, compliance of specification, deviation sheets, schedule of
equipments and other required documents.
• Participation in tender meetings and pre tender meetings for technical
clarification.
• Preparation of estimation and costing boq for estimation.
• CO-ordination with material department for project cost estimation.
• Selection/technical clearance for various electrical fitments such as
Protection Relays, Meters, CTs, PTs and other electrical accessories for
estimation purpose.
3. • Design activities related to electrical substation, which involve
preparation,reviewing,submission and tracking of various electrical
deliverables such as sld, schematic, data sheets, load list, CT/PT burden
calculation, calculation of AC/DC/HEAT load for battery charger sizing, Cable
sizing,VDRL,Barchart,Wiring schedule and specification compliance.
• Preparation of single line diagram, development of logic and specifications
for metering, control and protection schematics for MV/LV switchgear,
control panels, protection panels and SCADA related requirements.
• Preparation of interconnection drawings interfacing with other substation
equipments such as GIS, Battery chargers, LV AC/DC distribution board.
• CO-ordination activities with supplier, contractor and customer.
• Basic knowledge of ETAP software.
• Familiar with various report generated by ETAP, such as load flow, short
circuit analysis as well as motor starting analysis.
• Technical discussion with contractors, MEW, KOC AND KNPC design team for
finalization of design.
• Site visits to know the technical requirements for extension / modification.
• Review of subcontractor / vendor drawings and to carry out inspection for
subcontracting equipments.
• To co-ordinate with QA and Production department and to provide design
inputs during FAT and SAT
• To carry out trouble shooting for substation equipment to determine their
causes and recommends action to eliminate for such problem, which includes
carrying out tests on equipments.
• To carry out installation and commissioning activities for substation
equipments at site.
( B ) : - NEW AGE INDUSTRIES : -
• Employed in New Age Industries, Mumbai, with its Baroda Branch, Looking
after the entire marketing and after sales activities for various products in
fire fighting field such as fire hose, hydrants, fire water monitors, sprinklers,
etc.
• The nature of job involved tendering and order execution, technical
discussion with customers, providing demonstration for fire equipments and
collection of payments and routine follow-up for the entire Gujarat State
(India).
4. ( C ) :- JYOTI LIMITED : -
Switchgear plant, Gorwa, Baroda, India, an ISO 9001 Company.
• Associated with In-house routine electrical testing , which involves,
(1) Routine electrical testing for current transformer and voltage transformer.
(2) Routine electrical testing for various circuit breakers and vacuum contactor.
(3) Complete routine electrical testing of various control panels along with
metering and protective schemes with proper understanding of various
electrical wiring drawings and schematic drawings.
(4) Supervision of the product till final packing stage to obtain inspection
clearance from clients / consultants and to provide various test certificates
as per ISO: 9001 requirements.
(5) Inspection work of various electrical items at sub-venders and
manufacturer’s premises.
• Also associated with R & D activities , which involves,
(1) Preparation of various master bill of material, electrical wiring and
schematics drawings using Auto-cad.
(2) To prepare prototype model, to conduct and to witness various in house
Type test
(3) Development of new product such as Auto-Recloser and vacuum circuit
breaker with magnetic actuator.
( D ) :- SHRI KRISHNA ENTERPRISES : -
Engaged in marketing and after sales activities of various electrical products such as
Motor starters, mini-vac, and other lighting accessories for Gujarat state.
EDUCATIONAL QUALIFICATIONS:
Examination
Educational
Body
Year of
Passing
%
Obtained
Division
S.S.C.
Guj. Sec. Edu.
Board,
Gujarat, India
March
1986
80 % Distinction
Diploma in Electrical
Engg.
M.S.
University,
Baroda, India
March
1991
73 % Distinction
5. Bachelor in Electrical
Engg. ( B.E. Electrical )
M.S.
University ,
Baroda, India
June
1998
61 % First
ADDITIONAL TRAINING;
Industrial Safety From National Safety Council at Vallabh Vidyanagar,India
Auto-Cad 2000 from Roshni Computers, Baroda, India.
Promis Software for Preparation of Electrical Drawings from Al – Ahleia
Switchgear, Kuwait.
Internal Quality System Auditor for ISO 9001 Audit from Al – Ahleia
Switchgear, Kuwait.
ADDITIONAL ACTIVITIES:
(A)Provided following classroom training
- Training on basic protection schemes at AL-AHLEIA SWITCHGEAR, KUWAIT
for KOC personnel.
- Training on operation and maintenance of single busbar switchgear for
replacement of 9th
crude oil pipeline project at KOC
- Training on operation and maintenance of double busbar switchgear for MG1
substation project at MAGWA, B3 & AHMADI “E” KOC
- Training on control and protection schemes for MINAGISH-D & E substation
project, at MINAGISH OIL FIELD, KOC
- Training on maintenance of switchgear for BS 140 substation at site, KOC
- Training on operation and maintenance of single busbar switchgear for
SHUAIBA NORTH CO-GERERATION PLANT at SHUAIBA REFINERY
- Training on control and protection schemes for SABIYA GAS POWER PLANT
project at SABIYA, MEW
- Training on control and protection philosophy for A7 PUMPING STATION for
MPW.
(B)Conducting internal audit within the organization for ISO 9000/ISO
14000 as a lead auditor and ensuring the compliance from all the
employees and updating the checklists and audit reports.
PASSPORT DETAILS:
G 9943035 - issued at Kuwait, valid up to 26.10.2018
(ALPESH L SHAH) DATE: 29 / 11 / 2015, PLACE: KUWAIT
6. Bachelor in Electrical
Engg. ( B.E. Electrical )
M.S.
University ,
Baroda, India
June
1998
61 % First
ADDITIONAL TRAINING;
Industrial Safety From National Safety Council at Vallabh Vidyanagar,India
Auto-Cad 2000 from Roshni Computers, Baroda, India.
Promis Software for Preparation of Electrical Drawings from Al – Ahleia
Switchgear, Kuwait.
Internal Quality System Auditor for ISO 9001 Audit from Al – Ahleia
Switchgear, Kuwait.
ADDITIONAL ACTIVITIES:
(A)Provided following classroom training
- Training on basic protection schemes at AL-AHLEIA SWITCHGEAR, KUWAIT
for KOC personnel.
- Training on operation and maintenance of single busbar switchgear for
replacement of 9th
crude oil pipeline project at KOC
- Training on operation and maintenance of double busbar switchgear for MG1
substation project at MAGWA, B3 & AHMADI “E” KOC
- Training on control and protection schemes for MINAGISH-D & E substation
project, at MINAGISH OIL FIELD, KOC
- Training on maintenance of switchgear for BS 140 substation at site, KOC
- Training on operation and maintenance of single busbar switchgear for
SHUAIBA NORTH CO-GERERATION PLANT at SHUAIBA REFINERY
- Training on control and protection schemes for SABIYA GAS POWER PLANT
project at SABIYA, MEW
- Training on control and protection philosophy for A7 PUMPING STATION for
MPW.
(B)Conducting internal audit within the organization for ISO 9000/ISO
14000 as a lead auditor and ensuring the compliance from all the
employees and updating the checklists and audit reports.
PASSPORT DETAILS:
G 9943035 - issued at Kuwait, valid up to 26.10.2018
(ALPESH L SHAH) DATE: 29 / 11 / 2015, PLACE: KUWAIT