7. Farah Trading & Contracting Company
Founded in 1962 by the Farraj Family, the company is headquartered in Amman Jordan.
It remains today a family owned and operated business. In its early years the Farah Trading and
Contracting Company developed into one of Jordan’s largest contracting companies, responsible for the
construction of many large buildings in and around Amman.
Building on the business and management expertise gained in the original contracting business a decision
was taken to redirect the company’s resources and energies toward the manufacture and sale of circuit
protection devices and electrical distribution technology.
The developing electrical distribution systems throughout the Middle East provided a need for
sophisticated products that would meet both local and international standards.
For 35 years, the Farah Trading & Contracting Company was the exclusive licensee of Westinghouse
Electric and its successor company Cutler/Hammer (Eaton) for electrical distribution products in the
Middle East, continually adding to their warehousing, manufacturing, modification and test facilities.
8. Farah Trading & Contracting Company
Farah Trading and contracting company founded in 1962 by the
Farraj Family as
FTC Group headquarters and located in Amman. On January, 2014
FTC Group headquarters was moved to a new and Expanded Office
Complex at Al- Sakhra Al-Mosharafa street, Amman, Jordan.
The new complex will house the following facilities :
•IT Academy
•Meeting rooms
•Theatre
•Gym
•Restaurant
Farah trading and contracting company is an Authorized Distributor
for Microsoft
products in Jordan and Iraq, it also reached an agreement to distribute
GE General Electric (Electrical Distribution Products) in the UAE,
Kuwait, Qatar, Oman and Jordan to complement their own brand of
Circuit Protection Devices.
9. 1974 - Westinghouse Electric
1994 - Cutler-Hammer
2004 - Eaton
2005 - Microsoft Authorized Distributor
2007 - Began a project to design and manufacture a line of Circuit Protection Devices that meet all the needs of
The Middle East market.
2009 - Terminated the partnership with Cutler-Hammer and Eaton and launched the Farraj Trading and
Manufacturing Company brand of Circuit Protection Devices.
2010 - Agreed to distribute General Electric (Electrical Distribution Products) in the UAE, Kuwait, Qatar, Oman,
And Jordan
2010 - Opened Qatar’s first electrical equipment manufacturing facility in Doha, to manufacture and assemble
General Electric low voltage switchgear.
A proven record of bringing new products and technology to the Middle East:
10. Development of Farah Trading and Contracting
1962 - Farah Trading & Contracting Company Begins Operations
1962 -1972 FTC Operations in Lebanon
1972 - Signs Agreement With General Electric
1975 - Establishes Warehouse In Aqaba Free Zone
1975 - Establishes United Plastic Company, Providing Conduit: To local markets in Saudi Arabia
1978 - 1979 Begins Negotiations With Westinghouse
1980 - Signs Agreement With Westinghouse
1981 - Establishes Warehouse in Zarqa Free Zone
1983 - Obtains License From Saudi Audi Ministry Of Industry to produce circuit breakers in Saudi Arabia
1983 - 1984 Establishes Middle East Circuit Breakers Company with Saudi Partners
11. 1985 - Official Opening of Middle East Circuit Breaker Company begins manufacture of QUICKLAG Circuit Breakers.
1986 - Egyptian Arabian Breakers Manufacturing Company Formed
1987 - EABCO Commences Operation Producing QUICKLAG Breakers
1987 - Middle East Circuit Breaker Company inaugurates molded case breakers manufacturing line up to 400 Ampere.
1987 - Showroom and warehouse established in Tabuk, Saudi Arabia
1988 - The first extension to Zarqa free zone
1988 - EABCO started manufacturing molded case up to 630 Amp
1989 - MECBCO started production of molded case breakers up to 4000 Amp
1989 - SADDS training facility for IMPACC System products to Amman Office.
1990 - Signs Agreement with Westinghouse for load center licenses.
Development of Farah Trading and Contracting
12. 1992 - Official opening of load center factory.
1993 - The second extension to ZARQA free zone
1993 - Establishes quality control laboratory for the breakers at FTC - Amman
1993 - Signs Agreement with Westinghouse for wiring devices.
1993 - Establishes Egyptian Jordanian Switch Manufacturing Company
1994 - Began planning for a new Headquarters Building in Amman
1995 - Moved management operations to new building “Farraj Commercial Center” – Sahab Street, Amman
1998 - Constructed warehouse in Sahab free zone
1999 - Established sales office, warehouse and modification.
2000 -Center in Jabal Ali Free Zone - Dubai
2000 – Planning for ISP company
Development of Farah Trading and Contracting
13. 2001 - Start up of “Network Exchange Technology” (NEXT)
2002 - Expansion of NEXT
2003 - Construction begun on a new factory in Dubai
2004 - Opens Dubai Factory
2005 - Signs agreement and begins distribution of Microsoft Products
2005 - Begin working with Eaton UK to assemble Din-Rall breaker in Jabal Ali
2006 - Begin Design Project for an IEC Plug-In MCB
2006 - Start project with Eaton to self manufacture the base and cover for the G frame
2007 - Start manufacturing the G Base and Cover
2008 - Received ASTA Certification for the FTC IEC Plug-In MCB
2009 - Launched a proprietary brand of Circuit protection devices
Development of Farah Trading and Contracting
14. 2010 - February Agreement with GE General Electric to distribution Circuit protection devices in the UAE,
Kuwait, Qatar, Oman and Jordan.
2010 - October Opened a Facility in Doha, Qatar to manufacture and assemble electrical distribution equipment
With GE Electrical components.
The record of Farah Trading and Contracting is one of growth and introduction the latest hardware and software
Technology pertaining to electrical distribution in the Middle East market.
Fatah Trading and Manufacturing Company is dedicated to provide a complete line of certified Circuit Protection
Devices with the highest standard of service and support. As market conditions change it’s FTC policy
To react quickly and do what it takes to have a product offering that will maintain or increase market share.
Development of Farah Trading and Contracting
15. October 2005, FTC Group Becomes an Authorized Distributor for Microsoft, In
Response to the growing demand in the local market, Microsoft Eastern
Mediterranean appointed Farah Trading and Contracting Company as its second
Distributor in Jordan.
IN 2009, the license agreements with Eaton were terminated to allow Farah Trading
to manufacture and market a proprietary brand of Circuit Protection Devices.
In February 2010, Farah Trading and Contracting Company reached an agreement to
Distribute GE General Electric (Electrical Distribution Products) in the UAE, Kuwait, Qatar,
Oman and Jordan; to complement their own brand of Circuit Protection Devices.
On October 2010 Qatar’s first electrical equipment manufacturing facility was formally
Inaugurated in Doha by the Minister of State for Energy and Industry Affairs. It will
Manufacture and assemble General Electric’s low voltage switchgear.
Farah Trading & Contracting Company
17. IN 2006, FTMC initiated a project to design, tool and manufacture
A line of circuit breakers, that meet the general and specific
Requirements of the Middle East market. Now produced In our
Jebel-Ali factory, the result is a complete line of breakers that are
Certified by ASTA.
FTMC maintains a high quality standards in state of the art
Manufacturing facilities as recognized by ISO certification. FTMC
Is one of the most important suppliers of Circuit Breakers in the
Entire Middle East.
22. Middle East Presence.. Our Divisions And
Locations
Farah Trading and Contracting
Company, Amman, Jordan
Farraj Trading and Manufacturing
Company, Dubai, UAE
Al Farraj Trading & Manufacturing
Company, Doha, Qatar
23. Middle East Presence.. Our Divisions And
Locations
Saudi Panels & breakers
Manufacturing Company, Riyadh
& Jeddah K.S.A
Sahara Combined General Trading
& Contracting Company, Hawalli,
Kuwait
Abu Dhabi Switchgear Factory
L.L.C, Abu Dhabi, United Arab
Emiratis
24. Middle East Presence.. Our Divisions And
Locations
Networks Exchange Technology
Company
(NEXT), Amman, Jordan
United Plastic Company
(Rogeena)
Amman, Jordan
Green Source GSI A Specialized
EPC Solar Contractor
Amman, Jordan
25.
26.
27. Company vision and Mission
As part of Microsoft's Licensing Solutions Provider Program, NEXT recently
Joined a select list of partners in Jordan that have the ability to sell Enterprise
Agreements of Microsoft solutions and technologies directly to large and
Medium enterprises. As LSP, we will now be able to sell and procure
Microsoft licenses including Microsoft SELECT PLUS, Microsoft Enterprise,
Enterprise Subscription Agreements and Microsoft SCHOOL, CAMPUS and
EES Agreements programs.
This latest development will give Enterprise customers more choice in order
To procure and manage their software assets in the form of an Enterprise
Agreement with Microsoft. NEXT was awarded the LSP status for
Demonstrating its capability to add value to enterprise clients in terms of
Coverage, customer experience and Solutions expertise.
NEXT vision is To be the Trusted Advisor to our clients, helping them enhance
Business performance through innovative technology solutions. NEXT
Mission is to become a market leader by consistently exceeding our
Customer's expectations; providing them with best of Microsoft licensing
Solutions.
We will continually communicate with, and learn from our Customers, in
Order to improve our services. And, we will keep on top of today's and
Tomorrow's technology, no matter how fast it moves, to ensure our
Customers always have the best solution available to them. We strive for
Operational excellence in all we do.
We offer our customers
Customized programs that are
Designed to meet their business
Needs, Tailored to the size and
Purchasing preference of their
Organization
NEXT established a Strong
Managerial team in Business
And Technology and qualified
With Cisco and Microsoft
Certifications, so they can
Accomplish a long-term vision
To drive the company business
And marketing policy.
28. NEXT – Networks Exchange Technology Company
Microsoft Partner
Gold Volume Licensing
Gold Software Asset Management
Gold Management and Virtualization
29.
30. The Story of Our Success
AL FARRAJ Group International is an electro-mechanical contracting company that specializes
in the design, installation and maintenance of safety and security systems. We aim to create
Environments. We work closely with all of our clients through out the design, testing and
commissioning stages. First, we understand our customers’ requirements, then we seek to fulfill
them. This meticulous approach allows us to provide highly efficient safety and security systems.
As a company, we believe in the value of quality, and in perfecting our work. Our operations may
be broad, as they extend across the safety and security spectrum, but our goal is always one: To
provide and maintain long safety and security solutions. We work with many industries, and
provide solutions tailored to their needs. These include the manufacturing, residential, aviation,
transportation and energy industries, among others. In short, we provide specialized solutions for
each client.
ABOUT US
Our Mission
we deliver reliable safety and
security solutions to help our
clients protect lives and properties.
At the heart of our effort is a
commitment to client satisfaction
as the only way to achieve
sustainable growth.
Core Values
We strongly believe that service quality is determined by the
positive attitude and dedication of our people. Therefore, we strive
to be:
professional: To ensure excellence in every service, solution and
function that we provide.
Reliable: To increase effectiveness and efficiency by using the best
technology available.
Competent: To commit our skills and energies to becoming one of
the best safety and security companies.
Honorable: To deal with clients with complete integrity and
honesty.
Proactive: To conquer all challenges and seek every opportunity in
order to gain the competitive edge in the market.
Our Services
Design and Engineering
Installations
Project Management/Maintanance
Retrofitting
31. Our first step in every fire protection project is a detailed risk analysis for the facility. This allows us to identify the most effective
solution for the protection of lives and properties. In designing our Life Safety Systems, we use BIM (Building Information
Modeling), as it allows us to visualize the solution before it is implemented. Our solutions are designed to meet all governmental
regulations, insurance requirements and any other governing bodies. So, whatever your needs, we will provide the right solution.
Explore Our Services
Design & Engineering
AL FARRAJ Group International is proud to own
a technologically advanced, state-of- the-art
engineering studio. Our design team is
composed of tech-savvy experts who strive to
deliver design solutions that match international
fire safety standards. We are capable of
meeting the standards of both international
regulatory bodies like NFPA or FM Global, and
local authorities like the Civil Defense.
We have a thorough design process which
takes into consideration code compliance, fire
safety goals, project-specific requirements,
design practicality, and performance
assessment. Right at the onset of every project,
we plan every step thoroughly: including the
conceptual design, detailed engineering, on-site
work, and acceptance.
32. Explore Our Services
Installations
Our installation process goes above and beyond
the simply adequate. We seek to adopt innovative
installation techniques that keep up to pace with
every technological advancement. Coordination
between projects allows us to complete our work
quickly and effectively. Our on-site supervisors
make sure that the installation process goes
smoothly and according to schedule, and
maintains a high standard of quality.
ALFARRAJ Group International’s team is
comprised of highly-skilled technicians trained by
the system manufacturers’ themselves to use high
pressure piping tools. Precise installation makes
our systems efficient and ensures that they are up
to the task of protecting lives and property.
33. Maintenance
It is equally important to keep the systems fit once
installed. AL FARRAJ Group International does it all
right from the beginning. Our maintenance Team
schedules each and every visit to inspect each and
every component of the system to make sure
performance is not compromised in any manner.
Mainte- nance team creates a log for entire system
and verify all the devices are in ‘Originally
Intended Position’ and always ready to protect life
and property. Our teams are equipped with state-
of-the-art trouble shooting equipment all the time
to bring back the disarmed systems to action in
minimum possible time. Specially trained to
quickly identify issues, our service experts are
intact with the knowledge and expertise to rapidly
respond with the best solution based on the
specific
Explore Our Services
34. Retrofitting
As a building evolves, so do its fire protection.
Our expert retrofitting team is always prepared
to handle fire protection retrofitting projects.
They deliver safe, code-satisfying solutions
that keep alterations to a minimum. The
retrofitting process begins with a thorough
evaluation of the facility’s fire protection needs
under current fire codes, insurance
equipments, and owner specifications. Then,
we work on generating appropriate solutions
to increase the level of protection, either
through the whole facility, or in specific areas.
Our goal is to do our work efficiently and
safely without disrupting yours. Our project
managers plan our work so that we can install
they systems while allowing your business to
continue operating with as little interruption as
possible.
Explore Our Services
35. Wet System
These are the simplest and most common type of sprinkler system
installation. They involve relatively few components. A wet system
provides fixed fire protection. It uses pipes that are always filled with
pressurized water from a dependable source. During a fire, water is
continuously discharged through sprinklers located directly over and
close to the fire area. The fire is detected using closed, heat-sensitive
automatic sprinklers. These are spaced out according to recognized
installation standards. When activated, the sprinklers distribute the
water over a specific area to control or extinguish the fire. This precise
approach to extinguishment minimizes water damage.
Applications:
•Residential Occupancies
•Commercial Establishments
•Warehouses / Factories
•Schools / Institutions
•Production Facilities
•Community Centers
•Workshops / Garages
36. Dry System
Dry System
A dry-pipe system utilizes water as an extinguishing agent. Pipes run
from the dry pipe valve, a remote valve located in a heated space, to
the automatic fusible sprinklers. The pipes are filled with pressurized air
or nitrogen. Dry pipe systems are used in cold areas where the water
would freeze, partially or entirely, if kept in the pipes. The air in the
pipes keeps the dry pipe valve in the closed position. The dry-pipe
valve prevents water from entering the pipes until a fire causes one or
more of the sprinklers to operate. Once this happens, the air escapes
and the dry pipe valve opens. Water then enters the pipe, flowing
through the open sprinklers and onto the fire.
Applications:
•Valuable Artifacts
•Aircraft Hangars
•High-Hazard Installations
•Computer Rooms
•Libraries
•Archives
•Refrigerated Spaces
37. Deluge System
Deluge System
These are fixed fire protection systems in which the pipe system
remains empty until a valve, termed the deluge valve, opens in
response to a fire. This releases pressurized water from open nozzles
or sprinklers. Deluge systems are more complex than wet and dry pipe
systems. Depending on its configuration, a deluge system can be
activated hydraulically, pneumatically, electrically, manually, or by any
combination of these means. But, in all cases, the deluge valve itself is
activated hydraulically. When a detection device is activated, the deluge
valve open sand water flows into the piping system. The water is
discharged through all spray nozzles or sprinklers simultaneously.
Applications:
•Power Plants
•Aircraft Hangars
•Chemical Processing Facilities
•Paints Storage
•Fuel Storage Tanks
•Gaseous Liquid Storage Facilities
•Outdoor Transformers
38. Foam-Water System
Foam-Water System
A foam-water system is composed of a special system of pipes
connected to a source of foam concentrate and a water supply. The
system uses appropriate discharge devices to control and/or extinguish
fires which require a smothering and cooling agent. The piping system
is connected to the water supply by a control valve. The valve is
opened when automatic detection equipment, located in the same area,
detect a fire. Foam-water systems are designed to distribute a foam-
water solution onto a specific hazard area. Upon exhaustion of its foam
concentrate supply, the system releases water until it is shut off
manually. Some flammable products may require different types of
foam.
Applications:
•Extraction plants
•Flammable Liquid Storage
•Refineries
•Aircraft Hangars
•Heliports
•Jet Engine Test Facilities
•Marine Applications
39. Carbon dioxide System
Carbon dioxide System
Carbon dioxide was the first gas to be used as a fire extinguishing
agent. It is a chemically-inert, electrically non-conductive and odorless
gas. A Carbon dioxide system includes detectors, a control unit, agent
storage cylinders, piping and discharge nozzles. Carbon dioxide
extinguishes fires by reducing Oxygen levels to stop combustion.
Carbon dioxide systems have three settings: They can completely flood
hazard areas (for unoccupied areas), protect processing and machinery
areas, or be manually operable as a hand-hose system in emergency
situations. In each of these cases, the duration and rate of agent
discharge are customized.
Applications:
•Combustible Liquids
•Liquefied Gases
•Electrical Equipment
•Smoldering Fires
•Power generation
•Cable Tunnels
•Transformers
40. FM-200 System
FM-200 System
FM-200® is an industry-leading, eco-friendly, gas-based fire
suppression system. It offers a halon-free alternative to the ozone-
depleting Halon 1301. It is among the fastest fire protection systems
available: It can extinguish chemical and electrical fires in under 10
seconds. FM-200 systems limit damage, lower repair costs, and reduce
downtime and, most importantly, increase personnel and property
safety. The FM-200 agent is stored in liquid form in cylinders. It is
pressurized with nitrogen, thus greatly reducing storage space.
Therefore, the FM-200 is suitable for applications where space is
limited.
Applications:
•Data Processing Centers
•Server Rooms
•Telephone Switches
•Process Control Rooms
•Museums
•Sophisticated Electronic Equipment
•Hospitals
41. Novec 1230 System
Novec 1230 System
The 3MTM NovecTM 1230 Fire Protection Fluid used by this system is
a next-generation halon alternative. It balances performance, human
safety and environmental concerns. The Novec 1230 fluid can be
effectively utilized to control fires, flood fire areas, and suppress
explosions. It can be used in manned spaces. Because its usage
concentration is much lower than its No Observable Adverse Effects
level (NOAEL), the Novec 1230 Fire Protection Fluid is one of the
safest, most viable halon alternatives. It is an effective extinguishing
agent because of its zero electrical conductivity.
Applications:
•Data Processing Centers
•Server Rooms
•Telephone Switches
•Process Control Rooms
•Museums
•Marine Applications
•Oil and Gas industry
42. Tank Protection System
Tank Protection System
In a storage tank fire protection system, fixed discharge devices are
installed around the hazard. The discharge devices connect to pipes,
which terminate a control valve, safe distance away from the hazard-
normally outside a dike wall and the control valve is connected to main
fire water line. The type of extinguishing agent to use is determined by
the nature of the hazard. If engineered, installed and maintained
correctly, a tank protection system will work reliably for many years.
The system can be fixed or semi-fixed, depending on its location,
intended application, and the type of the storage tank.
Applications:
•Liquefied Gas Storage Tanks
•Hazardous Chemical Tanks
•Oil Storage Tanks
•Fuel Storage Tanks
•Flammable Liquid Storage Tanks
•Industrial Processing Vessels
•LPG Storage Facilities
43. Water Mist System
Water Mist System
A water mist fire suppression system uses a fine mist to extinguish fires
quickly. This system releases less water than a traditional wet sprinkler
system does. The use of water means that the mist system is safe and
non-toxic for both humans and the environment. A water mist system is
suitable in any setting where water use must be limited. Water mist
systems have 3 classes: class I refers to the range between 100
and 200 μm, class II to 200-400 μm and class III to 400-1000 μm. Fire
control and suppression by Water Mist is strongly related to
the interaction between the sprayed flow and flames.
Applications:
•Machine Spaces
•Diesel Generators
•Power Plants
•Gas Turbines
•Museums
•Highway Tunnels
•Transportation
44. Kitchen Hood System
Kitchen Hood System
A kitchen hood fire suppression system is a pre-engineered system that
uses a wet chemical agent, stored air pressure, fixed nozzles and a
fixed agent distribution network. The detection network, consisting of
fusible links or detectors, automatically detects a fire. The system
releases a low pH extinguishing agent. The agent travels through the
hood and duct and onto the kitchen appliances. The agent distributes
itself in the form of minute droplets, creating an insulating coat. This
cuts off the oxygen supply to the source of the fire, preventing
combustion from continuing and thus stopping the fire.
Applications:
•Commercial Cooking
•Restaurants
•Food Joints
•Hotels
•Military Bases
•Hospitals
•Universities
45. Conventional Fire Detection
Conventional Fire Detection
Conventional fire detection and alarm systems are suitable for the early
detection of fires. They have very simple configurations. Due to their
simplicity, conventional systems are most reliable and economical when
used in small or medium-sized facilities. Conventional Systems are
popular because they are user-friendly and easy to maintain. In its
simplest configuration, a conventional system cannot pinpoint the exact
location of a fire. However, a facility can be subdivided into definite
areas or zones. For example, in a multistory building, each floor can
represent a zone. Zoning allows the user to determine the specific
location of the fire.
Applications:
•Residential Occupancies
•Schools / Institutions
•Banks / Business Centers
•Community Centres
•Warehouses / Factories
•Libraries
•Commercial Centres
46. Addressable Fire Detection
Addressable Fire Detection
Addressable fire alarm systems can quickly detect fires and identify
their exact location. They are also easy to maintain. An addressable
system is a flexible one. It can be configured for use in medium or large
facilities, and can aid evacuation plans. Every device/unit connected to
the system has its own unique address. When a device detects a fire,
the main control panel displays the address of that device. This informs
the user of the exact location of the fire, so it can be quickly
extinguished. The addressable system’s ability to pinpoint the exact
location of a fire saves valuable time and effort. Addressable system
can be combined with fire fighter telephone system.
Applications:
•Hospitals
•Banks
•Libraries
•Data Centres
•Museums
•High Rise Buildings
•Commercial Centres
47.
48.
49.
50. FIRE EXTINGUISHERS
HOSE REEL
FIRE CABINETS
HIGH PRESSURE FIRE HYDRANT
WET & DRY RISER EQUIPMENT
HOSE RACK ASSEMBLY
HOSE CRADLE
FIRE SUPPRESSION SYSTEMS
FM 200 SYSTEM
SPRINKLER SYSTEMS
FIRE DOOR
ROGEENA PRODUCT – FIRE FIGHTING
56. Fire rated doors And frames play a vital role in keeping people
Safe and minimizing property damage during a fire. Hollow metal
Doors are excellent at limiting the danger and damage of fires. In
Fact, hollow metal is the only material widely available with a 3-
Hour rating. also offer temperature rise doors, which minimize the
Transfer of heat to the cooler side of the door. These doors are
Commonly found in stairwells of high-rise buildings because they
Allow people to safely pass below the floors with fire.
Wide range of sizes and styles meet or exceed industry fire
Safety testing standards including Underwriters Laboratories (UL
& ULC), Factory Mutual (FM) Doors are compliant with all NFPA-
80 standards .
57. Manufactured as per BS EN671-1 standard- LPCB.
Hose reel discs are manufactured using 1.2mm electro galvanized steel
sheets and has ribs that gave extra strength, which in turn avoid
twisting. Hose reel drum painted with red powder coating or chrome in
stainless steel finish are available upon request
Plastic nozzle supplied has jet/spray/shut-off operations.
Chrome plated brass nozzle is available upon request.
Hose has working pressure of 12 bar and bursting pressure of 50 bar
and it is red in color, black color also available upon request.
Inlet stop valve 1” size in made of brass and finished with chrome. Brass
finish available upon request.
Each unit is hydrostatically tested at 18 bar.
For fixed hose reel, a hose guide could be supplied upon request.
Swinging hose reel is mounted on an arm which swings 180° and the
hose can be run out in all directions without a hose guide.
In automatic models, the valve opens automatically within three
revolutions of the reel.
Fire hose reel is an efficient and reliable fire-fighting unit suitable for use
in all types of buildings. The water is supplied through the center of the
reel, so the unit is always ready for immediate use.
70. ABOUT US
GSI A specialized EPC Solar Contractor
GSI Ltd. Is one of Farah Group. It was established in 2009 a specialized
EPC company on PV solar systems. GSI has installed and run
More than 3 MW PV solar systems in Jordan.
GSI Ltd Has a distinguished staff of engineers with highest GPA in
Electrical And electromechanical engineering, highly motivated,
Ambitious, and expert engineers and technicians.
Installation, material specification and System installation
Checklist are according to California energy commission
Consultant report.
71. OUR SERVICES
A- EPC PV Solar systems optimization of design and execution with best quality
B- Providing technical assistance to meet the requirements of Jordanian legislation and
ERC.
C- Our qualified engineers design and install PV systems in Jordan.
D- Our compiled experience in building PV Plants and sites preparation. Where we
Installed PV systems at different type of sand ground using Concrete foundation and
Ramming for structure fixation. We could Provide support and supervision to
construct PV plants.
E- We have dialogue channels with Electrical network companies such as (JEPCO,
EDCO,NEPCO) about PV designs to facilitate the proper Approvals to connect to
Network.
72. • Total Capacity: 14 MWP
• Location: Egypt
• Total Capacity: 1.5 MWP
• Location: Prince Hashem hospital / Aqaba/
Jordan
• Total Capacity: 200 KWP
• Location: Wadi Araba / Aqaba/ Jordan
•
• Total Capacity: 410.25 KWP
• Location: Amman/ Jordan
• Total Capacity: 42 KWP
• Location: Amman /Jordan
•
• Total Capacity: 30 KWP
• Location Amman/Jordan
• Total Capacity: 20 KWP
• Location Amman/Jordan
• Total Capacity: 500 KWP
• Location: Madaba/Jordan
PROJECTS IN PROGRESS
73. GROUND-MOUNTED
Solar Submersible, Irrigation Systems And Water Desalination
Total Capacity: 400 KWP Total Capacity: 1 MWP Total Capacity: 23.04 KWP
Total Capacity: 27.36 KWP Total Capacity: 22.08 KWP Total Capacity: 24.25 KWP
74. ROOF - TOP
Solar Submersible, Irrigation Systems And Water Desalination
Total Capacity: 60 KWP Total Capacity: 26.5 KWP Total Capacity: 2 KWP
Total Capacity: 15 KWP Total Capacity: 8.75 KWP Total Capacity: 15.3 KWP
