This document is a resume for Adil Raheed, an architectural designer with over 6 years of experience in 2D and 3D drafting for commercial projects. He has excellent skills in AutoCAD, Revit, 3D Max, Excel, and other software. Currently working as an architectural designer for El Race Con. Gen. Cont. Co in Abu Dhabi, his responsibilities include preparing shop drawings, as-built drawings, door schedules, and more. He has a diploma in surveying and experience working in Pakistan before relocating to the UAE in 2013.
Structural civil engineer with four years of experience in the civil engineering construction sector. looking for a job opportunity as QC Engineer in big company
Structural civil engineer with four years of experience in the civil engineering construction sector. looking for a job opportunity as QC Engineer in big company
Planning engineer cv with 9 yrs experience(1)S Ajith
I am having overall 9 years experience into project planning also i am expert in Project planning,scheduling,monitoring, cost controlling ,preparing master programe ,resource planning ,EOT , Project Invoice claiming ,tender packages(Experienced in Commercial, Highraise building, Infra projects and Oil & gas), Software expert in primavera p6.8.3, MS Office project, MS.Excel, 3D google sketchup, Autocad, 3DX Max etc, also i am available to join immediately.
Thanking you,
Thanks Regards,
S.Ajith,
Mob :UAE :+971-0527442745
:INDIA :+91-9994437210
International journal of engineering and mathematical modelling vol2 no2_2015_1IJEMM
Management of the portfolios containing low liquidity assets is a tedious problem. The buyer proposes the price that can differ greatly from the paper value estimated by the seller, so the seller can not liquidate his portfolio instantly and waits for a more favorable offer. To minimize losses and move the theory towards practical needs one
can take into account the time lag of the liquidation of an illiquid asset. Working in the Merton’s optimal consumption framework with continuous time we consider an optimization problem for a portfolio with an illiquid, a risky and a risk-free asset. While a standard Black-Scholes market describes the liquid part of the investment the illiquid asset is sold at an exogenous random moment with prescribed liquidation time distribution. The investor has the logarithmic utility function as a limit case of a HARA-type utility. Different distributions of the liquidation time of the illiquid asset are under consideration - a classical exponential distribution andWeibull distribution that is more practically relevant. Under certain conditions we show the existence
of the viscosity solution in both cases. Applying numerical methods we compare classical Merton’s strategies and the optimal consumption-allocation strategies for portfolios with different liquidation time distributions of an illiquid asset.
International journal of engineering and mathematical modelling vol1 no1_2015_1IJEMM
The degradation of the weather conditions is dangerous for driving and should incite drivers to reduce the car speed. The present work solves this problem of the speed limit in city road and highway by changing automatically the authorized speed with the weather conditions.
The new developed stand-alone speed limit road sign is intelligent and is capable to analyze the weather context using sensors, and to display the most adapted speed limit according to the surrounding environment. Several scenarios have been proposed to develop a pre industrialized prototype and to analyze them according to different criteria (cost, consumption, endurance and reliability). In addition, the system is an autonomous stand alone and uses the solar energy as source of supply. The pre-industrial prototype of the system was successfully achieved. However to develop a "low cost" system a new concept of meteorological sensors was done, for the low consumption of the display we use the LED (light emitting diode) components.
Planning engineer cv with 9 yrs experience(1)S Ajith
I am having overall 9 years experience into project planning also i am expert in Project planning,scheduling,monitoring, cost controlling ,preparing master programe ,resource planning ,EOT , Project Invoice claiming ,tender packages(Experienced in Commercial, Highraise building, Infra projects and Oil & gas), Software expert in primavera p6.8.3, MS Office project, MS.Excel, 3D google sketchup, Autocad, 3DX Max etc, also i am available to join immediately.
Thanking you,
Thanks Regards,
S.Ajith,
Mob :UAE :+971-0527442745
:INDIA :+91-9994437210
International journal of engineering and mathematical modelling vol2 no2_2015_1IJEMM
Management of the portfolios containing low liquidity assets is a tedious problem. The buyer proposes the price that can differ greatly from the paper value estimated by the seller, so the seller can not liquidate his portfolio instantly and waits for a more favorable offer. To minimize losses and move the theory towards practical needs one
can take into account the time lag of the liquidation of an illiquid asset. Working in the Merton’s optimal consumption framework with continuous time we consider an optimization problem for a portfolio with an illiquid, a risky and a risk-free asset. While a standard Black-Scholes market describes the liquid part of the investment the illiquid asset is sold at an exogenous random moment with prescribed liquidation time distribution. The investor has the logarithmic utility function as a limit case of a HARA-type utility. Different distributions of the liquidation time of the illiquid asset are under consideration - a classical exponential distribution andWeibull distribution that is more practically relevant. Under certain conditions we show the existence
of the viscosity solution in both cases. Applying numerical methods we compare classical Merton’s strategies and the optimal consumption-allocation strategies for portfolios with different liquidation time distributions of an illiquid asset.
International journal of engineering and mathematical modelling vol1 no1_2015_1IJEMM
The degradation of the weather conditions is dangerous for driving and should incite drivers to reduce the car speed. The present work solves this problem of the speed limit in city road and highway by changing automatically the authorized speed with the weather conditions.
The new developed stand-alone speed limit road sign is intelligent and is capable to analyze the weather context using sensors, and to display the most adapted speed limit according to the surrounding environment. Several scenarios have been proposed to develop a pre industrialized prototype and to analyze them according to different criteria (cost, consumption, endurance and reliability). In addition, the system is an autonomous stand alone and uses the solar energy as source of supply. The pre-industrial prototype of the system was successfully achieved. However to develop a "low cost" system a new concept of meteorological sensors was done, for the low consumption of the display we use the LED (light emitting diode) components.
International journal of engineering and mathematical modelling vol2 no3_2015_2IJEMM
Mixed nite element approximation of reaction front propagation model in porous media is presented. The model consists of system of reaction-diffusion equations coupled with the equations of motion under the Darcy law. The existence of solution for the semi-discrete problem is established. The stability of the fully-discrete problem is
analyzed. Optimal error estimates are proved for both semi-discrete and fully-discrete approximate schemes.
International journal of engineering and mathematical modelling vol2 no1_2015_2IJEMM
This paper is devoted to the homogenization of the Maxwell equations with periodically oscillating coefficients in the bianisotropic media which represents the most general linear media. In the first time, the limiting homogeneous constitutive law is rigorously justified in the frequency domain and is found from the solution of a local problem on the unit cell. The homogenization process is based on the two-scale convergence conception. In the second time, the implementation of the homogeneous
constitutive law by using the finite element method and the introduction of the boundary conditions in the discrete problem are introduced. Finally, the numerical results associated of the perforated chiral media are presented.
International journal of engineering and mathematical modelling vol2 no2_2015_2IJEMM
The railway track is modeled as a continuous beam on elastic support. Train circulation is a random dynamic phenomenon and, according to the different frequencies of the loads it imposes, there exists the corresponding response of track superstructure. At the moment when an axle passes from the location of a sleeper, a random dynamic load is applied on the sleeper. The theoretical approach for the estimation of the dynamic loading of a sleeper demands the analysis of the total load acting on the sleeper to individual component loads-actions, which, in general, can be divided into:
• the static component of the load‚ and the relevant to it reaction/action per support point of the rail (sleeper)
• the dynamic component of the load, and the relevant to it reaction/action per support point of the rail (sleeper)
The dynamic component of the load of the track depends on the mechanical properties (stiffness, damping) of the system “vehicle-track”, and on the excitation caused by the vehicle’s motion on the track. The response of the track to the aforementioned excitation results in the increase of the static loads on the superstructure. The dynamic load is primarily caused by the motion of the vehicle’s Non-Suspended (Unsprung) Masses, which are excited by track geometry defects, and, to a smaller degree, by the effect of the Suspended (Sprung) Masses. In order to formulate the theoretical equations for the calculation of the dynamic component of the load, the statistical probability of exceeding the calculated load -in real conditions- should be considered, so that the corresponding equations refer to the standard deviation (variance) of the load.
In the present paper the dynamic component is investigated through the second order differential equation of motion of the Non Suspended Masses of the Vehicle and specifically the transient response of the reaction/ action on each support point (sleeper) of the rail. The case of a deformed or bent joint or welding is analyzed through the second order differential equation of motion and the solution is investigated.
International journal of engineering and mathematical modelling vol2 no3_2015_1IJEMM
A weak nonlinear stability analysis has been performed for an oscillatory mode of convection, heat and mass transports in terms of
Nusselt, Sherwood numbers are derived and evaluated by a non$-$autonomous complex Ginzburg-Landau equation. The porous layer boundaries are heated sinusoidally with time. The basic state temperature is defined in terms of study and oscillatory parts, where study part show nonlinear throughflow effect on the system and time dependant part show modulation effect. The generalized Darcy model is employed for the momentum equation. The disturbances of the flow are expanded in power series of amplitude of modulation, which is assumed to be small and employed using normal mode technics. The effect of vertical throughflow is found to stabilize or destabilize the system depending on its direction. The time relaxation parameter $\lambda_1$ has destabilizing effect, while time retardation parameter $\lambda_2$ has stabilizing effect on the system. Three types of modulations have been analyzed, and found that, OPM, LBMO cases are effective on heat and mass transfer than IPM case. The effects of amplitude and frequency of modulation on heat and mass transports have been analyzed and depicted graphically. The study establishes that the heat and mass transports can be controlled effectively by a mechanism that is external to the system.
ICML- CROWDML - Ioannis (Yanni) Antonellis, Senior Director, Data Science at...Ioannis (Yanni) Antonellis
Talk given at the ICML 2015 CrowdML workshop on how Upwork (formly Elance-oDesk) uses machine learning to match clients looking to hire freelancers with freelancers looking for jobs online.
Dear Sir/Madam
I am a civil site engineer with 4 years work experienced
in the construction field & (electrical)as a civil site Engineer at UAE.
I request your good self to give me an opportunity to prove my
capabilities in your organizations. I assure you that I shall give my
best in getting in the job accomplished. My CV is enclosed herewith
for your kind perusal.
Expecting a favorable response from your end.
Thanks and regards.
Best Regards
Madhu Ravi
(+971-509027107)-(+971-558235824)
Respected Sir,
Subject: Application for the Post of Senior Auto CAD Supervisor / Designer
I wish to offer my candidature to your esteemed organization for the above post. I am skilled, motivated, collaborative team player with ability to coordinate and communicate with others and having excellent academic credentials.
A brief curriculum vitae of my qualifications, experience etc, is attached herewith for your kind perusal. I shall be glad to give you any further information you may require. I appreciate if your organization can arrange an interview and give an opportunity so that I could demonstrate my capabilities.
Regards,
Ninesh M.U
BIM Designer having 6 years of professional experience in design, modeling and coordination of commercial,residential, hospital projects seeking for a better opportunity.
I am architect with thirteen years' experience in Consultancy of various projects as luxury Residential, office buildings, industrial, educational, Hotels and commercial buildings. Since graduating from the faculty of fine Arts, Helwan university with a BC.s degree in Architecture, I have worked in several well-known architecture and design companies.I have technical, management and computer skills with advanced knowledge of Auto CAD, Microsoft Office, Adobe, Revit, Microsoft project, 3d MAX, and other graphics communication programs. My attention to detail and problem-solving skills ensure that every project I work on is done accurately and to the highest possible standard. I am comfortable working as a team leader to build a strong team work but also have the ability to manage multi projects and to meet target in each of them. My verbal communication skills and positive attitude make me an effective communicator with all clients I work with.
1. ADIL RAHEED
Flat # 204 Golden Building, Hamden Street Abu Dhabi ,UAE
Email: adilrasheed678@gmail.com
Contact Number: 00971-56-1454807
CARRER PROFILE :-
Architectural Designer with 6 years of experience working on 2D & 3D drawings for
multiple types of commercial projects including hospitality, multi-family, senior living,
institutional, office, and industrial buildings. Self-starting professional continuously
researches and adopts new technologies to improve drafting skills. Comfortable working
directly with engineering staff, sales staff, and clients to produce drawings and budgets
from sketches, existing drawings,
COMPUTER SKILLS :-
Autodesk 3d Max Excellent
Auto CAD Excellent
Autodesk Revit Excellent
Excel Excellent
Office Excellent
Word Excellent
Power Point Excellent
Typing Speed Excellent
Core Qualifications:-
• Excellent knowledge of principles of Architectural design and relevant procedures and
building codes.
• Superior proficiency in relevant software including CAD Photoshop Microsoft Office and 3d
Studio Max.
• Strong ability to work in a collaborative team environment.
• Extensive history of Working with a wide variety of Individual and Corporate clients
• Developed aesthetic Composition and logistical Analysis for models drawings and Sketches
• Prepared 3D Renderings and document packages for Presentation.
• Performed Due Diligence Pre-design research to meet regulatory standards and Approval.
• Prepared drawings to meet office CAD Standards
• Preparation of Architectural & Structural Shop Drawings and sending final print out of
drawings to consultant for approval.
• Preparation of AS BUILT Drawings at end of project and submit final soft Copy and hard
copy of drawings to Consultant and Client.
• Coordinate with all Services Drawings of (Plumbing, HVAC & Electrical).
• Preparation drawings of Building Plans, Elevations, Sections, Bath Rooms, Kitchen, Door &
Windows, Staircases Finishing.
2. • Preparation of Materials Quantities for Civil and Architectural works.
• Coordinate with engineers and supervisor to ensure work is going on as per the drafted plan.
Real Time Architectural Designer :-
Period February 2014 – Till Date
Company El Race Con. Gen. Cont. Co
Position Architectural Designer
Place Mustashfa Al Corniche Hospital Abu Dhabi UAE
Project
Construction, Renovation, Refurbishment & Maintenance
work of Hospitals and Clinic Buildings in Abu Dhabi ( SEHA
Project)
ROLES AND RESPINSIBILITIES:-
Responsible for all AutoCAD works.
Preparing as Built layout drawings for site.
Responsible for ensuring the layout of the building is as per the Municipality requirement
Preparing shop drawing for Vinyl.
Design of kitchen with Section & Elevation
Design of Bathroom Complete Detail Drawing
Preparing Signage Drawings.
Preparing Door Schedule Drawings
Preparing Computer Work Counter Drawing completer with Section & Elevation
Preparing B.O.Q
Calculation Sheet for Excel
Preparing Ceiling plan
Attending Weekly meetings
Preparation perspective View according to the final plans & Elevations with as per BOQ
material and finishing suitable Camera and Lights.
Coordinating with site staff for proper execution at site and reporting to senior construction
manager.
Complete Project:-
Period : July 2013 –February 2014
Company : El Race Con. Gen. Cont. Co.
3. Position : Architectural Draughtsman
Place : Mustashfa Al Mafraq Hospital Abu Dhabi UAE
Project Construction, Renovation, Refurbishment & Maintenance
work of Hospitals and Clinic Buildings in Abu Dhabi ( SEHA
Project)
ROLES AND RESPINSIBILITIES:-
Responsible for all AutoCAD works.
Preparing Shop drawings of plan, Section & Elevation
Preparing 3D Modal Drawings
Preparing Door Schedule Drawings
Prepare as Built layout drawings for site.
Preparing of B.O.Q
Preparing Computer work counter drawing complete with Section & Elevation.
Calculation Sheet for Excel
Typing works
Attending weekly meetings
PROFESSIONAL EXPERIENCE PAKISTAN:-
Period : Jun 2008 –Dec 2011
Company : Habib Rafique Construction Company (HRL)
Position : Architectural Draughtsman
Place : 80-Nazim-ud-Din Road, F-8/4, Islamabad - Pakistan
Project : Defence Housing Authority Phase - II
ROLES AND RESPINSIBILITIES:-
Responsible for all AutoCAD works
Preparing Shop drawings of plan, Section & Elevation
Preparing Door Schedule Drawings
Prepare as Built layout drawings for site.
Typing works
Attending weekly meetings
Academic Qualification:-
4. • Diploma in surveying from PMDC Survey Institute khewra Jhelum Pakistan (2012)
• Matriculation with Science Subject Abbottabad Board (2007)
• AutoCAD From Nicon Group of Collages Islamabad Pakistan (2012)
INERASTE:-
Computer games, internet surfing and reading books.
Music. Movies and Travelling.
Personal Information.
Father’s Name: Muhammad Rasheed
Date of Birth: 01-Mar-1987
Marital status: Married
Passport No:
Visa Type:
CA9840012
Residence Visa
Visa Expire 28-07-2017
UAE Expires: August 2013 to Till Date
UAE Driving License: Valid License
Language English, Urdu, Hindi,
I do hereby declare that all the above information furnished by me are true and
correct to the best of my knowledge.