The company has expanded its manufacturing capabilities with a new 20,000 square foot plant building. This includes a high-speed CNC machine that can form parts from sheet metal and wire at speeds up to 150 pieces per minute. Additional new equipment are a lapping machine and double disc grinding machine to provide precise machining of components like valves, washers, and shims within 5 microns. The company can now produce special profile wire rings and hydraulic rings.

1. Added Manufacturing Capabilities
 New Plant Building Expansion - 20000 Sq. ft.
 CNC Machine - High Speed Multi Forming Parts from Sheet and Wire.
YSM, TAIWAN
 Lapping Machine
 Double Disc Grinding Machine
 Special Profile Wire Rings, Hydraulic Rings Etc.

2. New Plant Building Expansion - 20000 Sq. ft.

3. CNC Machine
High Speed Multi Forming Parts from Sheet and Wire.
Model: YSM CNC-39T
Wire Input Diameter : 1.50 to 6.50mm
Strip Input Thickness : 0.80 to 3.00mm
Strip Input Width : 60mm
Max. Forming Speed : 150 ppm
Max. Forming Speed : 150 ppm
Press Capacity : 40 Tons
Accuracy : +/-0.005
Material input : Spring Steel, Stainless
Steel, Brass, Copper Etc.
Job Type : Any Strip and Wire Formed Parts.
Some Examples set in below slides

5. LAPPING MACHINE
Model: L-1500
Job Size : For up to 250 mm Job Diameter
Accuracy : Less than 5 Microns – Mirror Finish
Job Type : Valve Plates, Machined Washers,
Shims, Etc.
Model: L-1000
Job Size : For up to 150 mm Job Diameter
Accuracy : Less than 5 Microns – Mirror Finish
Job Type : Valve Plates, Machined Washers,
Shims, Etc.

6. Lapping Components
(Shims & Valve Plates Etc)

7. DOUBLE DISC GRINDING MACHINE
Model: DDG-500 V2
Job Size : 150mm Diameter
Accuracy : +/-0.005
Accuracy : +/-0.005
Job Type : Machines Washers,
Shims, Retainers Etc.

8. GROUNDED COMPONENTS

9. Special Profile Wire Rings, Hydraulic Rings

10. THANK YOU
THANK YOU