1. Sliding table panel saws have been developed to improve on traditional circular saws for machining precision and production efficiency in industries like furniture manufacturing. 2. They can be manually fed or use automated loading and unloading, and are widely used for cutting materials like plywood, particleboard, and plastic sheets. 3. When operating a sliding table panel saw, safety procedures must be followed like checking for proper grounding, ensuring safety devices are working, inspecting the workpiece and blade direction of rotation, and turning off power for adjustments.

1. About the sliding table panel saw safety procedures
With the artificial board manufacturing industry in the application of a large number
of furniture, building decoration industry and other industries, the traditional
general circular saw both the machining precision, and production efficiency of all
already cannot satisfy the needs of the process. Therefore, all kinds of sliding table
panel saw sheet material of a woodworking cutting saw has been developed rapidly
from. The low productivity of manual feed or feed machinery of small and
medium-sized panel saw, to have a high degree of automation and productivity with
a digital controller or computer program optimization and with a variety of large
combined automatic loading and unloading mechanism of the vertical sawing plate
system, manufacturing, construction and decoration in furniture, vehicle
manufacturing and other industries has been widely used in precision. For cutting
saw to plywood, particleboard, fiberboard, plywood, laminated board, blockboard,
wood mosaic and plastic sheet for longitudinal cutting, sawing and transverse or
angle In order to obtain the size of the plate to meet the requirements of the
specification, but also can be used for a variety of insulation board, thin aluminum
plate and aluminum cutting

2. when operation the sliding table panel saw，please pay attention to the following
aspects.
1.Reliable grounding device shall be used before the operation of the machine and
check whether other safety protection devices are normal.
2. Before the start of the power tools, fixtures, locking objects, such as system
inspection.
3. Before the operation of the machine, check whether the parts are loose and
damaged, and timely adjustment and replacement, to ensure its normal function.

3. 4.Check the direction of rotation of the blade before operation.
5.The feed direction of the workpiece must reverse the direction of rotation of the
cutter or saw blade.
6.When operating the machine tools, all safety devices are not allowed to be removed or opened.
7.Materials before processing should be checked whether the workpiece is cut saw
iron, sand, such as living quarters, in order to prevent damage to the saw blade and
live out of the wound.

4. 8.Adjust the sample machine, you must turn off the power supply, so as not to cause
casualties.
9.Manual feeding, the material must be close to the table and the plate, the hand is
not allowed to close to the blade, is strictly prohibited to control the processing of
materials.
10.Push and pull the movable working table, force should be uniform, strictly
slammed the table from the side thrust to the other side, the worktable and handle
prohibited collision and wind and percussion.
11.The operation of the machine tool must wear tight clothes, is strictly prohibited
to wear loose clothes and wear ties, bracelets, etc., long hair to wear a long hat to
wear long hair.

5. 12.Poor health or drink is strictly prohibited machine tools.
13.When the machine tool failure, should immediately cut off the power supply, and
stop operation, send someone to carry out maintenance or adjustment, this machine
is strictly prohibited sick operation.
14.The use of tools and accessories must be correct, it is strictly prohibited to use
more than the original design of the machine tools and accessories.
15.The machine tool should be designated for operation, maintenance, adjustment
and maintenance.

6. 16.After the operation of the machine must cut off the power supply, wait until the
machine completely stop cleaning the machine, so that the machine can be reset to
leave.