An overview of the measuring and installation process of the VistaView Horizon.

1. About the Horizon
1

2. Overview
• Installation
• FAQ
2

3. Horizon Specs
3
Phifer 18 x 14

4. Horizon Measuring
4
Measuring the width of a
Horizon is the same as all
our VistaViews and
BetterViews

5. Horizon Measuring
5

6. Installation Overview
-What’s in the box
-Tools needed
-Step by step
6

7. What’s in the Box
-Parts Bag
-Unit
-Instructions
7

8. Tools Needed
-Spline Roller
-Chop Saw
-Driver
-Phillips Driver Bits
-Ladder
-Hard Knife
-Pry Bar
-Allen Key
-Silicon
-Vacuum
8

9. 9

10. 10

11. 11

12. 12

13. 13

14. 14

15. 15

16. 16

17. 17

18. 18

19. 19

20. 20

21. 21

22. 22

23. 23

24. 24

25. 25

26. 26

27. 27

28. 28

29. 29

30. FAQ
Can we recess the bottom track?
The Alignment Jig gives you the cut out profile
for the housing.
The Track Mount gives the cut out profile for
the track.
30

31. FAQ
How do we set the track height on a double
unit?
31

32. FAQ
Can I conceal the housing and upper track?
All systems need to be accessible for servicing.
The upper track can not be recessed but it can
be concealed. Your installation method needs
to account for access.
32

33. FAQ
How do the brakes shoes work?
The Brake Shoes are on the very ends of the
pull-bar. They do not grip the side of the track,
but rather work like a shoe on a balance beam.
33

34. FAQ
How do we adjust Spring Tension?
Summery of Step 17:
-8mm Allen Key
-20:1 Gear Ratio
-Don’t rotate at full speed!
During production we are able to change
gearbox to allow back access.
34

35. FAQ
What about Water drainage?
During installation you will have to account for
drainage with weep holes.
The Lower Track Mount can be placed in
multiple sections to allow for the weep hole
drainage between the sections-the lower track
is not cut into sections!
35