The document describes the AEC-6850 embedded control PC. It is a fanless system utilizing an Intel Celeron M processor up to 1.3GHz. It is suitable for use in public multimedia and commercial environments due to its compact size and flexible I/O including VGA, TV-out, audio, USB and serial ports. The AEC-6850 is designed for rugged environments with capabilities like withstand vibration up to 5G rms and operating temperatures from -15°C to 60°C with a mean time before failure of 50,000 hours.
Hướng dẫn sử dụng AAeon-ACP-1104, Máy tính công nghiệp là hệ thống máy tính chuyên dụng, được dùng trong vận hành công nghiệp đặc biệt ở những nhà máy, phân xưởng với áp suất không đồng đều.
System Electronic Press control systems from 1982 to 1990.The Pb2 system was well accepted by users for ease of programming. It was well known for its reliability and accuracy. Many are still in use to today. The PB2.x versions system operated simple proportional hydraulic systems.
Hướng dẫn sử dụng AAeon-ACP-1104, Máy tính công nghiệp là hệ thống máy tính chuyên dụng, được dùng trong vận hành công nghiệp đặc biệt ở những nhà máy, phân xưởng với áp suất không đồng đều.
System Electronic Press control systems from 1982 to 1990.The Pb2 system was well accepted by users for ease of programming. It was well known for its reliability and accuracy. Many are still in use to today. The PB2.x versions system operated simple proportional hydraulic systems.
BOXER - 8120AI được thiết kế cho tính toán AI tiên tiến. Được trang bị NVIDIA Jetson TX2, nó hỗ trợ 256 lõi CUDA, Máy tính công nghiệp không quạt AAEON BOXER-8120AI
데이타맥스프린터 DATAMAX A-Class 열전사 RFID 바코드프린터엔진 오토라벨러엔진 매뉴얼HION IT
고성능 인쇄 및 응용 프로그램의 요구 사항이 기존 인쇄 엔진이 제공하는 것보다 많은 기능이 필요한 경우 새로운 Datamax A-Class ™로 이동할시기입니다.
A 클래스 모델 : A-4212, A-4310, A-4408, A-4606, A-6212, A-6310
데이타맥스 A-Class 고급 바코드 프린터 엔진 제품군에는 스테인레스 스틸 하드웨어 구성 요소, 모듈식 전자카드 케이지, 현장 설치형 열전사 리본 어셈블리, 원격제어 패널 및 전체 그래픽 디스플레이와 같은 혁신적인 디자인 기능이 많이 포함되어 있습니다.
애플리케이터 통합 인쇄 및 적용을 위해 설계된 A-Class는 산업 표준 통신 인터페이스에 대한 연결 옵션을 갖춘 Datamax I-Class 펌웨어 아키텍처를 사용합니다.
데이타맥스 A 클래스 RFID 옵션은 현재 64비트 또는 96비트 메모리가 있는 EPCglobal Class 1 태그를 수용합니다.
사양 및 요구 사항이 발전함에 따라 더 많은 태그 인코딩 기능이 추가됩니다.
Right-handed printer
Media peel bar
4MB FLASH downloadable program memory
16MB DRAM memory
Two RS-232 serial interfaces, 9pin
One IEEE 1284 compliant parallel interface
One USB v1.1 interface
RS422/RS485 Interface
One applicator interface ports (15pin) with programmable inputs and outputs
Graphics LCD control display with backlight
EFIGS (English, French, Italian, German, and Spanish) LCD languages
AGFA Scalable Font Engine with CG Triumvirate™ Scalable (regular and bold condensed) fonts
Industry standard bar code symbologies
Time and Date battery back up
Static brushes
Host Computer accessible RAM/Flash memory for object temporary storage
DPL command language
Slide in style card cage
Fault handling with reprint or void selection
Parse error-tolerant command language interpretation
Internal test labels for printhead verification, print quality validation, and internal configuration
Resident multiple setup store and restore capability
Time stamp at print capability
Paper retract control after print
Ribbon low detection and warning
Power up diagnostics
Resident option hardware diagnostics
Diagnostic display and modes
Media counters
Front panel security
Input line mode (ASCII text input) capability
Option hardware auto-detection
Scalable Font dynamic font attributes, bold and italics
Firmware upgrades downloadable
Audible Alert
A-CLASS OPTIONS
LEFT-HANDED VERSIONS
DIRECT THERMAL (no ribbon)
RIBBON SAVER
INTERNAL WIRELESS LAN (DMXrfNET)
INTERNAL ETHERNET LAN (DMXNET)
EXTERNAL ETHERNET LAN (DMX-100)
INTERNAL TWINAX/COAX INTERFACE
REMOTE FRONT PANEL DISPLAY
RFID (Encodes EPC Class 1 tags)
EXTERNAL KEYBOARD SUPPORT
8MB FLASH MAIN LOGIC BOARD
LINERLESS (Special Order)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
싸이퍼랩 9700 윈도우즈 PDA (Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3), 산업용PDA는 혹독한 현장에 적합하도록 설계되었으며 2 배터리(옵션) 운영으로 24시간 운영이 가능합니다.
타사의 경쟁 모델보다 CPU 처리속도, 메모리, 배터리 방진, 방수등급 등이 우월하면서도 가격 경쟁력 또한 우수합니다.
다양한 스캔 엔진을 제공하며 현장에서 교체 가능하도록 설계되었습니다.
(1D, 2D 다중모드, 최대 15m 바코드 인식)
Extended Range Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 13.5˚ ± 0.7˚
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
Min. Distance : 2 in/ 5 cm (7.5 mil)
Max. Distance : 45 ft/ 9.1 m (100 mil retro-reflective)
Near/Far 2D Imager
Technology : Auto-focus 2D imager
Light source : Auto-adaptive illumination: 617 nm highly visible LEDs
Scan Angle : 14˚ (horizontal), 8.7˚ (vertical)
Print Contrast : Down to 40%
Ambient Lighting : From 0 to 100,000 lux
Min. Distance : 6 in/ 15 cm (10 mil)
Max. Distance : 50 ft/ 15 m (300mil)
Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 47˚±3˚(typical), 35˚±3˚(narrow)
Print Contrast : Minimum 20% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
DOF : 1 to 45 in. / 2.5 to 114.3 cm
2D Imager
Technology : 752 x 480 pixels
Light source : 625 ±5 nm LEDs
Scan Angle : 40˚ (horizontal), 25˚ (vertical)
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : Max 96,900 lux (sunlight)
DOF :
5 mil code39 1.4 in./5.3cm to 7.5 in./19.1 cm
100% UPC 1.6 in./4.1cm to 12 in./30.5cm
5 mil PDF417 2.8 in./7.1cm to 4.5 in./11.4cm
다양한 키패드 선택
30-Key 및 38-Key 뉴메릭 키패드와 각각 4개 및 10개의 기능키
특정 52-Key 알파 뉴메릭키로 VT220 / TN3270 / TN5250 시스템 터미널 에뮬레이션 제공
우연한 터치에 의한 키패드 입력 오류를 방지하기 위한 키간격 유지 및 인체공학적 디자인
유연하고 효율적인 무선통신 제공
CCXv4 인증 IEEE 802.11 a/b/g/n
Bluetooth® 통신 Class II, V2.1
Push-to-talk (무전기, 동보전송 기능)
장시간 사용을 위한 주요 대안
표준 3600 mAh 뱃더리 및 대용량 5400 mAh 뱃더리 제공
최소 13 시간 계속 운용 (20초당 1번 레이저 스캐닝시)
두가지 Windows® 플랫폼 지원
Window® CE 6.0
Windows® Embedded Handheld 6.5
Android 6.0 (모델 : 9700A)
블루투스 및 무선랜 지원거리
블루투스 : 가시거리내에서 50m 지원
802.11 b/g: 가시거리 내에서 300 m 지원
802.11 a: 가시거리 내에서 250 m 지원
PERFORMANCE
Operating system : Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3
CPU : TI OMAP 3730 1GHz
Memory : 4GB Nand FLASH / 512MB DDR SDRAM
Expansion : Micro SD slot with SDHC support
Operating power : Rechargeable 3.7V 3600 mAh / 5400 mAh Li-ion Battery
Working hours1 : 13 hours
Alert : 3 LED indicators (for RF, charging status and good reading) / Vibrator/ Speaker
Interface supported : USB, RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
BOXER - 8120AI được thiết kế cho tính toán AI tiên tiến. Được trang bị NVIDIA Jetson TX2, nó hỗ trợ 256 lõi CUDA, Máy tính công nghiệp không quạt AAEON BOXER-8120AI
데이타맥스프린터 DATAMAX A-Class 열전사 RFID 바코드프린터엔진 오토라벨러엔진 매뉴얼HION IT
고성능 인쇄 및 응용 프로그램의 요구 사항이 기존 인쇄 엔진이 제공하는 것보다 많은 기능이 필요한 경우 새로운 Datamax A-Class ™로 이동할시기입니다.
A 클래스 모델 : A-4212, A-4310, A-4408, A-4606, A-6212, A-6310
데이타맥스 A-Class 고급 바코드 프린터 엔진 제품군에는 스테인레스 스틸 하드웨어 구성 요소, 모듈식 전자카드 케이지, 현장 설치형 열전사 리본 어셈블리, 원격제어 패널 및 전체 그래픽 디스플레이와 같은 혁신적인 디자인 기능이 많이 포함되어 있습니다.
애플리케이터 통합 인쇄 및 적용을 위해 설계된 A-Class는 산업 표준 통신 인터페이스에 대한 연결 옵션을 갖춘 Datamax I-Class 펌웨어 아키텍처를 사용합니다.
데이타맥스 A 클래스 RFID 옵션은 현재 64비트 또는 96비트 메모리가 있는 EPCglobal Class 1 태그를 수용합니다.
사양 및 요구 사항이 발전함에 따라 더 많은 태그 인코딩 기능이 추가됩니다.
Right-handed printer
Media peel bar
4MB FLASH downloadable program memory
16MB DRAM memory
Two RS-232 serial interfaces, 9pin
One IEEE 1284 compliant parallel interface
One USB v1.1 interface
RS422/RS485 Interface
One applicator interface ports (15pin) with programmable inputs and outputs
Graphics LCD control display with backlight
EFIGS (English, French, Italian, German, and Spanish) LCD languages
AGFA Scalable Font Engine with CG Triumvirate™ Scalable (regular and bold condensed) fonts
Industry standard bar code symbologies
Time and Date battery back up
Static brushes
Host Computer accessible RAM/Flash memory for object temporary storage
DPL command language
Slide in style card cage
Fault handling with reprint or void selection
Parse error-tolerant command language interpretation
Internal test labels for printhead verification, print quality validation, and internal configuration
Resident multiple setup store and restore capability
Time stamp at print capability
Paper retract control after print
Ribbon low detection and warning
Power up diagnostics
Resident option hardware diagnostics
Diagnostic display and modes
Media counters
Front panel security
Input line mode (ASCII text input) capability
Option hardware auto-detection
Scalable Font dynamic font attributes, bold and italics
Firmware upgrades downloadable
Audible Alert
A-CLASS OPTIONS
LEFT-HANDED VERSIONS
DIRECT THERMAL (no ribbon)
RIBBON SAVER
INTERNAL WIRELESS LAN (DMXrfNET)
INTERNAL ETHERNET LAN (DMXNET)
EXTERNAL ETHERNET LAN (DMX-100)
INTERNAL TWINAX/COAX INTERFACE
REMOTE FRONT PANEL DISPLAY
RFID (Encodes EPC Class 1 tags)
EXTERNAL KEYBOARD SUPPORT
8MB FLASH MAIN LOGIC BOARD
LINERLESS (Special Order)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
싸이퍼랩 9700 윈도우즈 PDA (Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3), 산업용PDA는 혹독한 현장에 적합하도록 설계되었으며 2 배터리(옵션) 운영으로 24시간 운영이 가능합니다.
타사의 경쟁 모델보다 CPU 처리속도, 메모리, 배터리 방진, 방수등급 등이 우월하면서도 가격 경쟁력 또한 우수합니다.
다양한 스캔 엔진을 제공하며 현장에서 교체 가능하도록 설계되었습니다.
(1D, 2D 다중모드, 최대 15m 바코드 인식)
Extended Range Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 13.5˚ ± 0.7˚
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
Min. Distance : 2 in/ 5 cm (7.5 mil)
Max. Distance : 45 ft/ 9.1 m (100 mil retro-reflective)
Near/Far 2D Imager
Technology : Auto-focus 2D imager
Light source : Auto-adaptive illumination: 617 nm highly visible LEDs
Scan Angle : 14˚ (horizontal), 8.7˚ (vertical)
Print Contrast : Down to 40%
Ambient Lighting : From 0 to 100,000 lux
Min. Distance : 6 in/ 15 cm (10 mil)
Max. Distance : 50 ft/ 15 m (300mil)
Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 47˚±3˚(typical), 35˚±3˚(narrow)
Print Contrast : Minimum 20% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
DOF : 1 to 45 in. / 2.5 to 114.3 cm
2D Imager
Technology : 752 x 480 pixels
Light source : 625 ±5 nm LEDs
Scan Angle : 40˚ (horizontal), 25˚ (vertical)
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : Max 96,900 lux (sunlight)
DOF :
5 mil code39 1.4 in./5.3cm to 7.5 in./19.1 cm
100% UPC 1.6 in./4.1cm to 12 in./30.5cm
5 mil PDF417 2.8 in./7.1cm to 4.5 in./11.4cm
다양한 키패드 선택
30-Key 및 38-Key 뉴메릭 키패드와 각각 4개 및 10개의 기능키
특정 52-Key 알파 뉴메릭키로 VT220 / TN3270 / TN5250 시스템 터미널 에뮬레이션 제공
우연한 터치에 의한 키패드 입력 오류를 방지하기 위한 키간격 유지 및 인체공학적 디자인
유연하고 효율적인 무선통신 제공
CCXv4 인증 IEEE 802.11 a/b/g/n
Bluetooth® 통신 Class II, V2.1
Push-to-talk (무전기, 동보전송 기능)
장시간 사용을 위한 주요 대안
표준 3600 mAh 뱃더리 및 대용량 5400 mAh 뱃더리 제공
최소 13 시간 계속 운용 (20초당 1번 레이저 스캐닝시)
두가지 Windows® 플랫폼 지원
Window® CE 6.0
Windows® Embedded Handheld 6.5
Android 6.0 (모델 : 9700A)
블루투스 및 무선랜 지원거리
블루투스 : 가시거리내에서 50m 지원
802.11 b/g: 가시거리 내에서 300 m 지원
802.11 a: 가시거리 내에서 250 m 지원
PERFORMANCE
Operating system : Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3
CPU : TI OMAP 3730 1GHz
Memory : 4GB Nand FLASH / 512MB DDR SDRAM
Expansion : Micro SD slot with SDHC support
Operating power : Rechargeable 3.7V 3600 mAh / 5400 mAh Li-ion Battery
Working hours1 : 13 hours
Alert : 3 LED indicators (for RF, charging status and good reading) / Vibrator/ Speaker
Interface supported : USB, RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Bo mạch CPU công nghiệp AAEON AAEON Technology là một nhà sản xuất Đài Loan được thành lập vào năm 1992 để phát triển các sản phẩm công nghiệp đáng tin cậy.
FWS - 2365 được xây dựng để cung cấp tốc độ mạng nhanh hơn và thông lượng cao hơn với tối đa bốn cổng SFP + Fiber 10 Gbps và lên đến sáu cổng LAN Gigabit
Máy tính công nghiệp AAeon-Boxer-6842M được chế tạo với một số tính năng chính để hoạt động trong môi trường công nghiệp. Hệ thống có thiết kế chắc chắn với đầu vào điện áp rộng (12 ~ 24V)
AAeon-AQ7-LN, AAEON, a leading embedded and industrial PC manufacturer, introduces the AQ7-LN, a Qseven CPU module with an onboard Intel® Atom™ N450 processor.
NO1 Uk Amil Baba In Lahore Kala Jadu In Lahore Best Amil In Lahore Amil In La...Amil baba
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
MATHEMATICS BRIDGE COURSE (TEN DAYS PLANNER) (FOR CLASS XI STUDENTS GOING TO ...PinkySharma900491
Class khatm kaam kaam karne kk kabhi uske kk innings evening karni nnod ennu Tak add djdhejs a Nissan s isme sniff kaam GCC bagg GB g ghan HD smart karmathtaa Niven ken many bhej kaam karne Nissan kaam kaam Karo kaam lal mam cell pal xoxo
1. Embedded Controller A E C - 6 8 5 0
AEC-6850
Fanless Embedded Control PC
Intel®
Celeron®
M 600MHz
1.3GHz Processor
With Ethernet, 2 COMs, Audio
TV-out, CompactFlash•
AEC-6850 Manual 2nd Ed.
August 2007
Downloaded from www.Manualslib.com manuals search engine
www.ipc247.com - maytinhaaeon.com
2. Embedded Controller A E C - 6 8 5 0
i
Copyright Notice
This document is copyrighted, 2007. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
Downloaded from www.Manualslib.com manuals search engine
3. Embedded Controller A E C - 6 8 5 0
ii
Acknowledgments
x Award is a trademark of Award Software International, Inc.
x CompactFlash™
is a trademark of the Compact Flash
Association.
x Intel®
and Celeron®
M are trademarks of Intel®
Corporation.
x Microsoft Windows
®
is a registered trademark of Microsoft
Corp.
x PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other product names or trademarks are properties of their
respective owners.
Downloaded from www.Manualslib.com manuals search engine
4. Embedded Controller A E C - 6 8 5 0
iii
Packing List
Before you begin operating your PC, please make sure that the
following materials have been shipped:
z 1 AEC-6850 Embedded Control PC
z 1 Keyboard mouse cable
z 1 AC Power Adapter (AC version only, A1/A2
Version)
z 1 Phoenix Power Connector (DC version only,
A3/A4 Version)
z 2 Wallmount Brackets
z 1 Audio Cable
z 1 Screw Package
z 1 CD-ROM for manual (in PDF format) and
drivers
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
Downloaded from www.Manualslib.com manuals search engine
5. Embedded Controller A E C - 6 8 5 0
iv
Safety Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a firm surface during installation. Dropping
it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
14. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
Downloaded from www.Manualslib.com manuals search engine
6. Embedded Controller A E C - 6 8 5 0
v
d. The equipment does not work well, or you cannot get it
to work according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW -20°C
(-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE
EQUIPMENT.
FCC Safety
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.
Caution:
There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local
government’s recycling or disposal directives.
Downloaded from www.Manualslib.com manuals search engine
7. Embedded Controller A E C - 6 8 5 0
vi
Below Table for China RoHS Requirements
ѻકЁ᳝↦᳝ᆇ⠽䋼ܗ㋴ৡ⿄ঞ䞣
AAEON Boxer/ Industrial System
᳝↦᳝ᆇ⠽䋼ܗ㋴
䚼ӊৡ⿄ 䪙
(Pb)
∲
(Hg)
䬝
(Cd)
݁Ӌ䫀
(Cr(VI))
⒈㘨㣃
(PBB)
⒈Ѡ㣃
䝮(PBDE)
ॄࠋ⬉䏃ᵓ
ঞ݊⬉ᄤ㒘ӊ
h ƻ ƻ ƻ ƻ ƻ
䚼ֵো
䖲఼ঞ㒓ᴤ
h ƻ ƻ ƻ ƻ ƻ
h ƻ ƻ ƻ ƻ ƻ
Ё༂໘⧚఼
Ϣݙᄬ
h ƻ ƻ ƻ ƻ ƻ
⹀Ⲭ h ƻ ƻ ƻ ƻ ƻ
⬉⑤ h ƻ ƻ ƻ ƻ ƻ
O˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ䞣ഛ
SJ/T 11363-2006 ᷛޚ㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
X˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ䞣䍙ߎ
SJ/T 11363-2006 ᷛޚ㾘ᅮⱘ䰤䞣㽕∖DŽ
⊼˖
ϔǃℸѻક᠔ᷛ⼎П⦃ֱՓ⫼ᳳ䰤ˈ㋏ᣛϔ㠀ℷᐌՓ⫼⢊މϟDŽ
ѠǃϞ䗄䚼ӊ⠽䋼Ё༂໘⧚఼ǃݙᄬǃ⹀Ⲭǃ⬉⑤Ў䗝䌁કDŽ
Downloaded from www.Manualslib.com manuals search engine
8. Embedded Controller A E C - 6 8 5 0
vii
Contents
Chapter 1 General Information
1.1 Introduction................................................................ 1-2
1.2 Features .................................................................... 1-4
1.3 Specifications ............................................................ 1-5
Chapter 2 Hardware Installation
2.1 Dimension ................................................................. 2-2
2.2 SDRAM Installation ................................................... 2-3
2.3 Internal CF Card Installation (IDE interface CF slot for
boot up) ........................................................................... 2-4
2.4 COM2 RS-232/422/485 Setting ................................ 2-6
2.5 COM2 RS-232/422/485 Serial Port Connector......... 2-6
2.6 COM 1 RS-232 Serial Port Connector ...................... 2-6
2.7 CD-ROM and 2.5” HDD Kit Installation..................... 2-7
2.8 Dual 2.5” HDD Kit Installation ................................... 2-11
2.9 3.5” HDD Kit Installation............................................ 2-15
2.10 Wallmount Bracket Installation................................ 2-19
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. .................................. 3-2
3.2 Award BIOS Setup .................................................... 3-3
Chapter 4 Driver Installation
4.1 Installation ................................................................. 4-3
Downloaded from www.Manualslib.com manuals search engine
9. Embedded Controller A E C - 6 8 5 0
viii
Appendix A Programming The Watchdog Timer
A.1 Programming ........................................................A-2
A.2 ITE8712 Watchdog Timer Initial Program ............A-6
Appendix B I/O Information
B.1 I/O Address Map ..................................................B-2
B.2 1st
MB Memory Address Map ...............................B-2
B.3 IRQ Mapping Chart ..............................................B-3
B.2 DMA Channel Assignments .................................B-3
Downloaded from www.Manualslib.com manuals search engine
10. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1- 1
General
Chapter
1
Information
Downloaded from www.Manualslib.com manuals search engine
11. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1-2
1.1 Introduction
Due to the growing popularity from the IPC market, the newest
Boxer series AEC-6850 has been introduced by AAEON.
Compared with the AEC-6830, it is an advanced version because it
utilizes an Intel®
Celeron®
processor without a fan.
New Innovation for Entertainment Multimedia Domain
In this era of information explosion, the advertising of consumer
products will not be confined to the family television, but will also
spread to high-traffic public areas, like department stores, the bus,
transportation station, the supermarket etc. The advertising
marketing industry will resort to every conceivable means to
transmit product information to consumers. System integrators
will need a multifunction device to satisfy commercial needs for
such public advertising.
Being a control center, the AEC-6850 is suitable for public
multimedia entertainment services. Equipped with a high efficiency
heat conduction mechanism, which is patented in Germany, the
AEC-6850 supports up to Celeron
®
M 1.3GHz processor.
The AEC-6850 is compact in size but has attractive and flexible
extension capabilities such as a 4-in-one card reader, 3 USB2.0
ports, VGA, TV-out, DVI, Audio, 2 COM ports and an optional IEEE
1394(FireWire) port.
Downloaded from www.Manualslib.com manuals search engine
12. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1- 3
Stable Design for Rugged Environment
The AEC-6850 is designed for rugged environments due to the
following reasons; first, it can withstand tough vibration testing up to
5G rms. With the anti-vibration hard drive device option, the
AEC-6850 can be used in high vibration environments. In addition,
the AEC-6850 offers low power consumption system that while
operating in ambient temperatures ranging from -15° to 60°C. The
MTBF(Mean Time Before Failure) rating states that the AEC-6850
can operate up to 50,000 hours at 35°C ambient temperature,
which indicates its careful and long-life design.
The AEC-6850 is a standalone high performance controller
designed for long-life operation and with high reliability. It can
replace traditional methods and become the mainstream
controller for the multimedia entertainment market.
Downloaded from www.Manualslib.com manuals search engine
13. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1-4
1.2 Features
x Fanless Design with Intel®
Celeron®
M 600MHz / 1.3GHz
Processor
x 4 in 1 Card Reader
x 2 COM / S-video / 3 USB 2.0 / Ethernet
Downloaded from www.Manualslib.com manuals search engine
14. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1- 5
1.3 Specifications
System
z CPU: Intel®
Celeron®
M 600MHz/ 1.3GHz
Processor
z Construction: Rugged Aluminum Alloy chassis
z System Memory: DDR SODIMM x 1, Max. 512MB
z VGA: DB-15 VGA connector
z Keyboard/Mouse: PS/2 Keyboard Mouse
z Ethernet: 10/100Base-TX RJ-45 connector x 1
z SSD: Internal Type II CompactFlash™
slot x 1
z Card Reader: CompactFlash™
, SD/ MMC/ MS/ XD
z Device Bay
(Optional):
CD-ROM 2.5”HDD Kit, 2 x 2.5” HDD Kit,
3.5” HDD Kit
z Serial Port: 1 x RS-232, 1 x RS-232/422/485
z Audio: MIC / Line In / Line Out by expansion
cable
z USB: 3 USB 2.0 ports
z DVI: DVI connector x 1
z Watchdog Timer: Generate a time-out System reset, setting
via software
z Power Supply: A1/A2 Version—AC Input:
External Power Adapter; Input Voltage:
100V AC~240V AC@ 50 ~ 60Hz;
A3/A4 Version—DC Input: 9V DC~30V DC
Downloaded from www.Manualslib.com manuals search engine
15. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1-6
z System Control: Power on / off switch x 1; Reset button x 1
z Indicator: Power LED x 1; HDD active LED x 1
z OS Support: Windows®
CE. NET, Windows®
XP
Embedded, Windows®
XP, Windows®
2000
Mechanical and Environmental
z Construction: Rugged Aluminum Alloy chassis
z Color: Dark Blue
z Mounting: Wallmount, Desktop
z Dimension: 8.35” (W) x 2.53” (H) x 6.26” (D) (212mm x
64mm x 159mm)
z Net Weight: 5.57lb (2.53kg)
z Gross Weight: 10.34lb (4.7kg)
z Operation
Temperature:
14°F~140°F (-15°C~60°C) – Celeron®
M
600MHz/CFD;
14°F~122°F(-15°C~50°C) –Celeron®
M
600MHz/HDD;
14°F ~ 122°F (-15°C ~ 50°C) – Celeron®
M 1.3GHz/CFD;
14°F ~ 113°F (-15°C ~ 45°C) – Celeron®
M
1.3GHz/HDD
z Operation
Humidity:
5~95% @ 40°C, non-condensing
Downloaded from www.Manualslib.com manuals search engine
16. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1- 7
z Vibration: 5 g rms / 5~500Hz / random operation
(CFD) 1 g / 5~500Hz / random operation
(HDD)
z Shock: 100g peak acceleration (11 msec.
duration)
15g peak acceleration (11 msec. duration)
(HDD)
z EMC: CE/FCC class B
Downloaded from www.Manualslib.com manuals search engine
17. Embedded Controller A E C - 6 8 5 0
Chapter 1 General Information 1-8
Front Side
Rear Side
TV-Out
S-Video
Ethernet
RJ-45, 10/100
Audio
Mini-Din 9-pin Line
Out/In, MIC In
Line out
USB 2.0 Port x 2
HDD LED
Reset
Power Switch
4-in-1 Card Reader
DVI
KB/Mouse
Mini-DIN 6-pin
VGA
D-sub 15-pin
Serial port
D-sub 9-pin
Serial port
D-sub 9-pin
USB 2.0 Port x 1
Power LED
Power Inlet
Mini-Din 4-pin
Downloaded from www.Manualslib.com manuals search engine
18. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2-1
Hardware
Installation
Chapter
2
Downloaded from www.Manualslib.com manuals search engine
19. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 2
2.1 Dimension
Downloaded from www.Manualslib.com manuals search engine
20. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 3
2.2 SDRAM Installation
Step 1: Take off the lid from the bottom of the chassis by loosening the
screws.
Step 2: Insert the SDRAM Module into the slot.
X
SDRAM Module Slot
Y
Downloaded from www.Manualslib.com manuals search engine
21. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 4
Step 3: Place the lid back on and lock with screws.
2.3 Internal CF Card Installation (IDE interface CF slot for boot
up)
Step 1: Take off the lid from the bottom of the chassis by loosening the
screws.
Downloaded from www.Manualslib.com manuals search engine
22. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 5
Step 2: Insert the CF Card into the slot.
X
CF Card Slot
Push
Y
Step 3: Place the lid back on and lock with screws.
Downloaded from www.Manualslib.com manuals search engine
23. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 6
2.4 COM2 RS-232/422/485 Setting
Note: RS-232/422/485 Selection by BIOS
2.5 COM2 RS-232/422/485 Serial Port Connector
Different devices implement the RS-232/422/485 standard in
different ways. If you are having problems with a serial device, be
sure to check the pin assignments below for the connector.
Pin Signal Pin Signal
1 DCD (422TXD-/485DATA-) 2 RXD (422RXD+)
3 TXD (422TXD+/485DATA+) 4 DTR (422RXD-)
5 GND 6 DSR
7 RTS 8 CTS
9 RI 10 N.C.
2.6 COM1 RS-232 Serial Port Connector
Pin Signal Pin Signal
1 DCD 2 RXD
3 TXD 4 DTR
5 GND 6 DSR
7 RTS 8 CTS
9 RI 10 N.C.
Downloaded from www.Manualslib.com manuals search engine
24. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 7
2.7 CD-ROM and 2.5” HDD Kit Installation
CD-ROM and 2.5” HDD Kit Combination
Step 1: Get the disk bracket ready.
Step 2: Fasten the CD-ROM to the disk bracket with screws.
Downloaded from www.Manualslib.com manuals search engine
25. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 8
Step 3: Fasten the Riser Card and the CD-ROM with screws.
Step 4: Fasten the 2.5” HDD module to the disk bracket with screws.
Riser Card
Step 5: Insert the flat cable into the slots on the Riser Card and the 2.5”
HDD module.
Flat Cable
Downloaded from www.Manualslib.com manuals search engine
26. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 9
Step 6: Place the CD-ROM and HDD kit into the suitable plate and then
reverse it. Screw the CD-ROM and HDD kit to the plate.
Cable Insertion
Step 1: Open the HDD cover by loosening the screws on the bottom of
the chassis.
Downloaded from www.Manualslib.com manuals search engine
27. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 10
Step 2: Insert the other side of flat cable into the slot on the bottom of the
chassis.
Flat Cable
Step 3: Combine the chassis with the CD-ROM and 2.5” HDD kit plate.
Then lock with screws.
Downloaded from www.Manualslib.com manuals search engine
28. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 11
2.8 Dual 2.5” HDD Kit Installation
HDD Kit Combination
Step 1: Get the bracket ready. Attach the rubber shock absorbers with
the bracket as illustration shown below.
Step 2: Fasten the first HDD module to the bracket with screws.
Step 3: Fasten the second HDD module to the bracket with screws.
Downloaded from www.Manualslib.com manuals search engine
29. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 12
Step 4: Insert the HDD cable into the slot on the HDD module.
HDD Cable
Step 5: Place the HDD kit into the HDD kit housing and then screw the
HDD kit onto the HDD kit housing.
Downloaded from www.Manualslib.com manuals search engine
30. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 13
Cable Insertion
Step 1: Open the HDD cover by loosening the screws on the bottom of
the chassis.
Step 2: Insert the other side of HDD cable into the slot on the bottom of
the chassis.
HDD Cable
Downloaded from www.Manualslib.com manuals search engine
31. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 14
Step 3: Combine the chassis with the HDD kit housing and then lock with
screws.
Downloaded from www.Manualslib.com manuals search engine
32. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 15
2.9 3.5” HDD Kit Installation
HDD Kit Combination
Step 1: Get the HDD module ready. Insert power cable and HDD cable
into the slots on the HDD module.
Power Cable
HDD Cable
Step 2: Get the bracket ready.
Downloaded from www.Manualslib.com manuals search engine
33. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 16
Step 3: Attach the rubber shock absorbers to the bracket as illustration
shown below.
Step 4: Fasten the HDD module to the bracket with screws.
Downloaded from www.Manualslib.com manuals search engine
34. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 17
Step 5: Get the screws ready, by matching them up with a washer.
Meanwhile, place the HDD kit into the HDD kit housing and then
screw the HDD kit to the HDD kit housing.
Magnificent
Cable Insertion
Step 1: Open the HDD cover by loosening the screws on the bottom of
the chassis.
Downloaded from www.Manualslib.com manuals search engine
35. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 18
Step 2: Insert the other side of HDD cable and power cable into the slots
on the bottom of the chassis.
HDD Cable
Power Cable
Step 3: Combine the chassis with the HDD kit housing and then lock with
screws.
Downloaded from www.Manualslib.com manuals search engine
36. Embedded Controller A E C - 6 8 5 0
Chapter 2 Hardware Installation 2 - 19
2.10 Wallmount Bracket Installation
Fasten the brackets with the appropriate screws.
Bracket
Bracket
Downloaded from www.Manualslib.com manuals search engine
37. Embedded Controller A E C - 6 8 5 0
Chapter 3 Award BIOS Setup 3-1
Chapter
Award
3
BIOS Setup
Downloaded from www.Manualslib.com manuals search engine
38. Embedded Controller A E C - 6 8 5 0
Chapter 3 Award BIOS Setup 3-2
3.1 System Test and Initialization
These routines test and initialize board hardware. If the routines
encounter an error during the tests, you will either hear a few
short beeps or see an error message on the screen. There are
two kinds of errors: fatal and non-fatal. The system can usually
continue the boot up sequence with non-fatal errors. Non-fatal
error messages usually appear on the screen along with the
following instructions:
Press F1 to RESUME
Write down the message and press the F1 key to continue the
boot up sequence.
System configuration verification
These routines check the current system configuration against
the values stored in the CMOS memory. If they do not match,
the program outputs an error message. You will then need to
run the BIOS setup program to set the configuration information
in memory.
There are three situations in which you will need to change the
CMOS settings:
1. You are starting your system for the first time
2. You have changed the hardware attached to your system
3. The CMOS memory has lost power and the configuration
information has been erased.
The AEC-6850 CMOS memory has an integral lithium battery
backup for data retention. However, you will need to replace the
complete unit when it finally runs down.
Downloaded from www.Manualslib.com manuals search engine
39. Embedded Controller A E C - 6 8 5 0
Chapter 3 Award BIOS Setup 3-3
3.2 Award BIOS Setup
Awards BIOS ROM has a built-in Setup program that allows
users to modify the basic system configuration. This type of
information is stored in battery-backed CMOS RAM so that it
retains the Setup information when the power is turned off.
Entering Setup
Power on the computer and press Del immediately. This will
allow you to enter Setup.
Standard CMOS Features
Use this menu for basic system configuration. (Date, time, IDE,
etc.)
Advanced BIOS Features
Use this menu to set the advanced features available on your
system.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and
optimize your system performance.
Downloaded from www.Manualslib.com manuals search engine
40. Embedded Controller A E C - 6 8 5 0
Chapter 3 Award BIOS Setup 3-4
Integrated Peripherals
Use this menu to specify your settings for integrated
peripherals. (Primary slave, secondary slave, keyboard, mouse
etc.)
Power Management Setup
Use this menu to specify your settings for power management.
(HDD power down, power on by ring, KB wake up, etc.)
PnP/PCI Configurations
This entry appears if your system supports PnP/PCI.
PC Health Status
This menu allows you to set the shutdown temperature for your
system.
Frequency/Voltage Control
Use this menu to specify your settings for auto detect
DIMM/PCI clock and spread spectrum.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the
minimal/stable performance for your system to operate.
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory
settings for optimal performance system operations. While
AWARD has designated the custom BIOS to maximize
performance, the factory has the right to change these defaults
to meet their needs.
Set Supervisor/User Password
Use this menu to set Supervisor/User Passwords.
Downloaded from www.Manualslib.com manuals search engine
41. Embedded Controller A E C - 6 8 5 0
Chapter 3 Award BIOS Setup 3-5
Save and Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
You can refer to the AAEON BIOS Item Description.pdf
file in the CD for the meaning of each setting in this
chapter.
Downloaded from www.Manualslib.com manuals search engine
42. Embedded Controller A E C - 6 8 5 0
Chapter 4 Driver Installation 4 - 1
Chapter
Driv
4er
Installation
Downloaded from www.Manualslib.com manuals search engine
43. Embedded Controller A E C - 6 8 5 0
Chapter 4 Driver Installation 4 - 2
The AEC-6850 comes with a CD-ROM that contains all
drivers and utilities that meet your needs.
Follow the sequence below to install the drivers:
Step 1 – Install Intel INF Update for Windows 9x-2003
Step 2 – Install Intel Extreme Graphics 2 Driver
Step 3 – Install Intel LAN Driver
Step 4 – Install Realtek AC97 codec Driver
Step 5 – Install USB Card Reader Driver
USB 2.0 Drivers are available for download using Windows
Update for both Windows XP and Windows 2000. For
additional information regarding USB 2.0 support in Windows
XP and Windows 2000, please visit
www.microsoft.com/hwdev/usb/.
Please read instructions below for further detailed
installations.
Downloaded from www.Manualslib.com manuals search engine
44. Embedded Controller A E C - 6 8 5 0
Chapter 4 Drivers Installation 4 - 3
4.1 Installation
Insert the AEC-6850 CD-ROM into the CD-ROM Drive. And
install the drivers from Step 1 to Step 5 in order.
Step 1 – Install Intel INF Update for Windows 9x-2003
1. Click on the Step 1 - Intel INF Update for Windows
9x-2003 folder and then double click on the setup.exe.
2. Follow the instructions that the window shows you
3. The system will help you install the driver automatically
Step 2 – Install Intel Extreme Graphics 2 Driver
1. Click on the Step 2 - Intel Extreme Graphics 2 Driver
folder and select the OS your system is
2. Double click on the setup.exe
3. Follow the instructions that the window shows you
4. The system will help you install the driver automatically
5. Please re-start your computer
Remark: You can choose the different display ways by
pressing below hot key,
Ctrl+Alt+F1=CRT, Ctrl+Alt+F2=LCD, Ctrl+Alt+F3=TV,
Ctrl+Alt+F4=DVI, Ctrl+Alt+F12=Graphic Control Panel
Step 3 – Install Intel LAN Driver
1. Click on the Step 3 - Intel LAN Driver folder and select
the OS your system is
2. Double click on the .exe file
Downloaded from www.Manualslib.com manuals search engine
45. Embedded Controller A E C - 6 8 5 0
Chapter 4 Driver Installation 4 - 4
3. Follow the instructions that the window shows you
4. The system will help you install the driver automatically
Step 4 – Install Realtek AC97 codec Driver
1. Click on the Step 4 - Realtek AC97 codec Driver folder
and then double click on the wdm_a361.exe
2. Follow the instructions that the window shows you
3. The system will help you install the driver automatically
Step 5 – Install USB Card Reader Driver
1. Click on the Step 5 – USB Card Reader Driver folder
2. Double click on the setup.exe
3. Language setting: Choose the highlighted item below to
operate your system in English.
4. Follow the instruction that the window will show to finish
the installation.
Note:
Under the Window OS environment, if the CRT connector is
connected to display monitor by the data switch device, the
user need to set the color and resolution from Intel Graphic
utility (VGA driver) instead of setting from the control panel in
case of the wrong display appearance.
Downloaded from www.Manualslib.com manuals search engine
46. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-1
Programming the
Appendix
A
Watchdog Timer
Downloaded from www.Manualslib.com manuals search engine
47. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-2
A.1 Programming
AEC-6850 utilizes ITE 8712 chipset as its watchdog timer
controller.
Below are the procedures to complete its configuration and the
AAEON intial watchdog timer program is also attached based on
which you can develop customized program to fit your application.
Configuring Sequence Description
After the hardware reset or power-on reset, the ITE 8712 enters the
normal mode with all logical devices disabled except KBC. The
initial state (enable bit ) of this logical device (KBC) is determined
by the state of pin 121 (DTR1#) at the falling edge of the system
reset during power-on reset.
Downloaded from www.Manualslib.com manuals search engine
48. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-3
There are three steps to complete the configuration setup: (1) Enter
the MB PnP Mode; (2) Modify the data of configuration registers; (3)
Exit the MB PnP Mode. Undesired result may occur if the MB PnP
Mode is not exited normally.
(1) Enter the MB PnP Mode
To enter the MB PnP Mode, four special I/O write operations are to
be performed during Wait for Key state. To ensure the initial state of
the key-check logic, it is necessary to perform four write opera-tions
to the Special Address port (2EH). Two different enter keys are
provided to select configuration ports (2Eh/2Fh) of the next step.
(2) Modify the Data of the Registers
All configuration registers can be accessed after entering the MB
PnP Mode. Before accessing a selected register, the content of
Index 07h must be changed to the LDN to which the register
belongs, except some Global registers.
(3) Exit the MB PnP Mode
Set bit 1 of the configure control register (Index=02h) to 1 to exit the
MB PnP Mode.
Downloaded from www.Manualslib.com manuals search engine
49. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-4
WatchDog Timer Configuration Registers
Configure Control (Index=02h)
This register is write only. Its values are not sticky; that is to say, a
hardware reset will automatically clear the bits, and does not
require the software to clear them.
Downloaded from www.Manualslib.com manuals search engine
50. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-5
WatchDog Timer Control Register (Index=71h, Default=00h)
WatchDog Timer Configuration Register (Index=72h,
Default=00h
WatchDog Timer Time-out Value Register (Index=73h,
Default=00h)
Downloaded from www.Manualslib.com manuals search engine
51. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-6
A.2 ITE8712 Watchdog Timer Initial Program
.MODEL SMALL
.CODE
Main:
CALL Enter_Configuration_mode
CALL Check_Chip
mov cl, 7
call Set_Logic_Device
;time setting
mov cl, 10 ; 10 Sec
dec al
Watch_Dog_Setting:
;Timer setting
mov al, cl
mov cl, 73h
call Superio_Set_Reg
;Clear by keyboard or mouse interrupt
mov al, 0f0h
mov cl, 71h
call Superio_Set_Reg
;unit is second.
mov al, 0C0H
mov cl, 72h
call Superio_Set_Reg
Downloaded from www.Manualslib.com manuals search engine
52. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-7
; game port enable
mov cl, 9
call Set_Logic_Device
Initial_OK:
CALL Exit_Configuration_mode
MOV AH,4Ch
INT 21h
Enter_Configuration_Mode PROC NEAR
MOV SI,WORD PTR CS:[Offset Cfg_Port]
MOV DX,02Eh
MOV CX,04h
Init_1:
MOV AL,BYTE PTR CS:[SI]
OUT DX,AL
INC SI
LOOP Init_1
RET
Enter_Configuration_Mode ENDP
Exit_Configuration_Mode PROC NEAR
MOV AX,0202h
CALL Write_Configuration_Data
Downloaded from www.Manualslib.com manuals search engine
53. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-8
RET
Exit_Configuration_Mode ENDP
Check_Chip PROC NEAR
MOV AL,20h
CALL Read_Configuration_Data
CMP AL,87h
JNE Not_Initial
MOV AL,21h
CALL Read_Configuration_Data
CMP AL,12h
JNE Not_Initial
Need_Initial:
STC
RET
Not_Initial:
CLC
RET
Check_Chip ENDP
Read_Configuration_Data PROC NEAR
MOV DX,WORD PTR CS:[Cfg_Port+04h]
OUT DX,AL
Downloaded from www.Manualslib.com manuals search engine
54. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-9
MOV DX,WORD PTR CS:[Cfg_Port+06h]
IN AL,DX
RET
Read_Configuration_Data ENDP
Write_Configuration_Data PROC NEAR
MOV DX,WORD PTR CS:[Cfg_Port+04h]
OUT DX,AL
XCHG AL,AH
MOV DX,WORD PTR CS:[Cfg_Port+06h]
OUT DX,AL
RET
Write_Configuration_Data ENDP
Superio_Set_Reg proc near
push ax
MOV DX,WORD PTR CS:[Cfg_Port+04h]
mov al,cl
out dx,al
pop ax
inc dx
out dx,al
ret
Superio_Set_Reg endp.Set_Logic_Device proc near
Set_Logic_Device proc near
Downloaded from www.Manualslib.com manuals search engine
55. Embedded Controller A E C - 6 8 5 0
Appendix A Programming the Watchdog Timer A-10
push ax
push cx
xchg al,cl
mov cl,07h
call Superio_Set_Reg
pop cx
pop ax
ret
Set_Logic_Device endp
;Select 02Eh-Index Port, 02Fh-Data Port
Cfg_Port DB 087h,001h,055h,055h
DW 02Eh,02Fh
END Main
Note: Interrupt level mapping
0Fh-Dh: not valid
0Ch: IRQ12
.
.
03h: IRQ3
02h: not valid
01h: IRQ1
00h: no interrupt selected
Downloaded from www.Manualslib.com manuals search engine
56. Embedded Controller A E C - 6 8 5 0
Appendix B I/O Information B-1
I/O Information
Appendix
B
Downloaded from www.Manualslib.com manuals search engine
57. Embedded Controller A E C - 6 8 5 0
Appendix B I/O Information B-2
B.1 I/O Address Map
Address Description User Address
000-01F DMA Controller #1 000-000F
020-03F Interrupt Controller #1, Master 020-021
040-05F System Time 040-043
060-06F 8042 (Keyboard Controller) 060-064
070-07F
Real time Clock, NMI (non-maskable
Interrupt) Mask
070-073
080-09F DMA Page Register 080-08F
0A0-0BF Interrupt Controller #2 0A0-0A1
0C0-0DF DMA Controller #2 0C0-0DF
0F0-0FF Math Coprpcessor 0F0-0FF
170-177 Secondary IDE Channel 170-177
1F0-1F7 Primary IDE Channel 1F0-1F7
2F8-2FF Serial Port 2 2F8-2FF
378-37F Parallel Printer Port 1 378-37F
3B0-3DF EGA / VGA card 3B0-3DF
3F8-3FF Serial Port 1 3F8-3FF
B.2 1st
MB Memory Address Map
Memory Address Description
00000-9FFFF System memory
A0000-BFFFF VGA buffer
C0000-CFFFF VGA BIOS
E0000-FFFFF System BIOS
Downloaded from www.Manualslib.com manuals search engine
58. Embedded Controller A E C - 6 8 5 0
Appendix B I/O Information B-3
B.3 IRQ Mapping Chart
IRQ0 System Timer IRQ8 System CMOS / Real
time clock
IRQ1 Keyboard IRQ9 Microsoft ACPI –
Compliant system
IRQ2 Cascade to IRQ Controller IRQ10 Unused
IRQ3 COM2 IRQ11 Unused
IRQ4 COM1 IRQ12 PS/2 mouse
IRQ5 Unused IRQ13 FPU
IRQ6 Unused IRQ14 Primary IDE
IRQ7 Printer IRQ15 Secondary IDE
B.4 DMA Channel Assignments
DMA Channel Function
0 Available
1 Available
2 Unused
3 Available
4 Direct Memory Access Controller
5 Available
6 Available
7 Available
Downloaded from www.Manualslib.com manuals search engine