There are many other visible spectrophotometer, you can visit our official website if you are interested. Also you can contact us when you got any problem, the contact information can be found on our websites.
Kanomax FMT - STPC Model 9010 Brochure 2019kanomaxfmt
The document discusses the Kanomax Scanning Threshold Particle Counter (STPC) Model 9010, which is used to monitor particle levels in ultrapure water (UPW) systems. The STPC can detect particles as small as 10 nm in size in real-time and provides early detection of excursions before wafer defects are observed. It measures particle concentrations across different size thresholds and has a 50% detection efficiency for particles as small as 10 nm. The STPC helps ensure UPW system health and stability and compliance with industry standards for particle monitoring in UPW.
Based on statistical analysis, data reliability
Sensors can be loaded directly into the reactor or pipe
No need to sample
Online operation can be applied to the Petri dish, beaker, reactor etc.
Process stability control
Rapid development of new formula
24h high quality production
Implementation research of drip tube stop devicessky chang
This document describes a study on implementing drip tube stop devices. It analyzes and designs a system using an infrared sensor and microcontroller to detect when the drip tube is empty and signal a servo motor to clamp the tube to prevent backflow of blood. The system was built and tested successfully. While compact and low-cost, future versions could integrate wireless connectivity and use surface-mount components to minimize the size for medical applications.
Simple, cost effective oxygen permeation testing for packages and bottles. The Systech Illinois 8200 is ideal for oxygen permeation testing of packages and bottles. This two station analyser is the economical solution – it incorporates the reliability and wide measurement range of our leading permeation instruments but is designed to be cost effective.
FONA XDG.
FONA XDG is an innovative dental X-ray equipment which meets the most stringent imaging requirements in the dental field, both when using high resolution digital receptors or finest grain films.
Sharper Images
The focal spot of 0.4 mm of Fona XDG’s' creates significantly sharper images than other X Rays, regardless if you operate with digital sensors, PSP, or film.
Smart Timer The Digital Timer has patient selection mode, teeth selection mode and Digital Sensor compatibility mode etc.
Technical Data
Dental X Ray
Equipment Fona XDG
Make Italy
Patient Selection Mode Adult, Kid, Female etc
Teeth Selection Mode Upper, Lower, Canine, Molar,Premolar etc.
Compatibility IOPA & Digital Sensor
Kv 70 kV
mA 3.5 mA fixed
Focal spot 0.4 mm IEC336/1993
Total Filtration 2.5 mm Al
Exposure time 0.21 to 11.2 (18 steps R10 scale)
Duty cycle 1:30
Line voltage 115/230 VAC, 50/60 Hz
Pantographic, Scissor Arm length availability 30”, 60”, 80”, 100” available
Warranty 1 years
Low Pressure Turbine Rotor Weld InspectionZetec Inc.
Low pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment aLow pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment and personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent. nd personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent.
The KLA-Tencor 300UV Series is the first reticle inspection system to use UV illumination. It can inspect reticles with advanced design rules, OPC structures, and phase shift masks. The 300UV Series builds on KLA-Tencor's 300 Series platform with UV optics, improved defect detection algorithms, and review tools. It can detect new classes of defects from techniques like low-k1, OPC, and new phase shifting materials that are difficult to detect with other systems. The 300UV Series provides flexible and upgradable inspection of reticles through various modes and configurations to protect customers' investments through advancing technologies.
Kanomax FMT - STPC Model 9010 Brochure 2019kanomaxfmt
The document discusses the Kanomax Scanning Threshold Particle Counter (STPC) Model 9010, which is used to monitor particle levels in ultrapure water (UPW) systems. The STPC can detect particles as small as 10 nm in size in real-time and provides early detection of excursions before wafer defects are observed. It measures particle concentrations across different size thresholds and has a 50% detection efficiency for particles as small as 10 nm. The STPC helps ensure UPW system health and stability and compliance with industry standards for particle monitoring in UPW.
Based on statistical analysis, data reliability
Sensors can be loaded directly into the reactor or pipe
No need to sample
Online operation can be applied to the Petri dish, beaker, reactor etc.
Process stability control
Rapid development of new formula
24h high quality production
Implementation research of drip tube stop devicessky chang
This document describes a study on implementing drip tube stop devices. It analyzes and designs a system using an infrared sensor and microcontroller to detect when the drip tube is empty and signal a servo motor to clamp the tube to prevent backflow of blood. The system was built and tested successfully. While compact and low-cost, future versions could integrate wireless connectivity and use surface-mount components to minimize the size for medical applications.
Simple, cost effective oxygen permeation testing for packages and bottles. The Systech Illinois 8200 is ideal for oxygen permeation testing of packages and bottles. This two station analyser is the economical solution – it incorporates the reliability and wide measurement range of our leading permeation instruments but is designed to be cost effective.
FONA XDG.
FONA XDG is an innovative dental X-ray equipment which meets the most stringent imaging requirements in the dental field, both when using high resolution digital receptors or finest grain films.
Sharper Images
The focal spot of 0.4 mm of Fona XDG’s' creates significantly sharper images than other X Rays, regardless if you operate with digital sensors, PSP, or film.
Smart Timer The Digital Timer has patient selection mode, teeth selection mode and Digital Sensor compatibility mode etc.
Technical Data
Dental X Ray
Equipment Fona XDG
Make Italy
Patient Selection Mode Adult, Kid, Female etc
Teeth Selection Mode Upper, Lower, Canine, Molar,Premolar etc.
Compatibility IOPA & Digital Sensor
Kv 70 kV
mA 3.5 mA fixed
Focal spot 0.4 mm IEC336/1993
Total Filtration 2.5 mm Al
Exposure time 0.21 to 11.2 (18 steps R10 scale)
Duty cycle 1:30
Line voltage 115/230 VAC, 50/60 Hz
Pantographic, Scissor Arm length availability 30”, 60”, 80”, 100” available
Warranty 1 years
Low Pressure Turbine Rotor Weld InspectionZetec Inc.
Low pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment aLow pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment and personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent. nd personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent.
The KLA-Tencor 300UV Series is the first reticle inspection system to use UV illumination. It can inspect reticles with advanced design rules, OPC structures, and phase shift masks. The 300UV Series builds on KLA-Tencor's 300 Series platform with UV optics, improved defect detection algorithms, and review tools. It can detect new classes of defects from techniques like low-k1, OPC, and new phase shifting materials that are difficult to detect with other systems. The 300UV Series provides flexible and upgradable inspection of reticles through various modes and configurations to protect customers' investments through advancing technologies.
HUBUNGI :
PT.JEKLINDO CONSULTING
JL. GADING RAYA II NO. 20 RAWAMANGUN
JAKARTA TIMUR
TELP. 021-4759206
MOBILE : 08121942042, 081288416332
Email : jeklindo@gmail.com
WWW.izinusahaindonesia.com
Rube Goldberg was an American cartoonist, inventor, and engineer born in 1883 in San Francisco. He studied engineering at UC Berkeley but left his job as a city engineer to pursue cartooning. Goldberg is renowned for creating overly complex machines to perform simple tasks, and "Rube Goldberg machines" have become popular in films, TV shows, and media to showcase comedic inventions.
This document provides a summary of Alayne McLaren's film production experience from 1989 to 2015, listing over 50 productions she has worked on in locations including New Zealand, Australia, Japan, the UK, France, and India. Her roles have included production manager, location manager, production coordinator, researcher, and casting. She has worked on films, television commercials, documentaries, and other productions for clients such as the BBC, National Geographic, Discovery Channel, and various advertising agencies.
This document contains a summary of an individual named Rahul Pachori. It includes his contact information, educational background of a B-Tech degree from RTU University in 2015, work experience in building design with the Public Works Department, areas of interest in construction and design, and personal details.
The document describes the five basic components of a computer system: the input unit, output unit, storage unit, central processing unit (CPU), and arithmetic logic unit (ALU). The input unit accepts instructions and data and converts it to a computer-readable format. The output unit accepts results from the CPU and converts it to a human-readable format. The storage unit stores data, instructions, and intermediate and final results. The CPU controls all internal and external devices and performs arithmetic/logical operations. The ALU is where actual processing and calculations occur.
El documento describe la taxonomía de Bloom, un sistema de clasificación de objetivos educativos desarrollado en 1956. La taxonomía categoriza los objetivos en dominios cognitivo, afectivo y psicomotor. El dominio cognitivo incluye seis niveles de objetivos - conocimiento, comprensión, aplicación, análisis, síntesis y evaluación - que van de lo más simple a lo más complejo. Los maestros deben considerar estos niveles al planificar actividades para ayudar a los estudiantes a avanzar en su aprendizaje
El documento presenta el plan de estudios del programa de Contaduría Pública de una universidad. Incluye las asignaturas requeridas divididas en áreas como contabilidad, sistemas de información, legislación, finanzas y electivas. El plan consta de diez semestres con cuatro o cinco asignaturas por semestre y los créditos necesarios para completar el programa.
El documento describe las actividades de un invernadero escolar. Los estudiantes prepararon los bancales, plantaron diferentes vegetales como tomates, lechugas y papas. Regaron y cuidaron las plantas. Cosecharon lechugas para ensalada. Plantaron un cerezo. Esperan cosechar tomates y fresas antes de que termine el curso escolar. Combaten plagas de forma ecológica. Continuarán trabajando en el invernadero después de las vacaciones de verano.
Este documento proporciona instrucciones a los estudiantes sobre el proceso de matrícula académica para el primer período de 2015. Indica que la matrícula se realizará de forma manual de lunes a viernes de 3 a 7 pm, y que los estudiantes deben presentar el acta de matrícula diligenciada y el recibo de pago de la matrícula financiera. Además, recomienda a los estudiantes inscribirse en un máximo de 6 asignaturas según su plan de estudios, y asegurarse de cumplir con
Registers are groups of flip-flops that store binary data. An n-bit register contains n flip-flops and can store 2^n different states. Registers are used to store and provide digital data to logic circuits. There are different types of registers including shift registers. Shift registers can transfer data in serial-in serial-out, serial-in parallel-out, parallel-in serial-out, and parallel-in parallel-out modes. Counters are registers that increment their stored value on each clock pulse and are used to count events.
IBM anunció que ha desarrollado el ordenador cuántico más avanzado del mundo, el cual puede realizar operaciones en segundos que llevarían cientos de años a una persona. Hace unos años, los ordenadores cuánticos eran vistos más como una teoría que como una posibilidad práctica, pero la tecnología ha demostrado una vez más que puede ganarle al tiempo.
Cooking in homes in Guatemala is often done over open fires without ventilation, posing health risks. People for Guatemala has created a stove for the San Marin region with two burners that vents smoke outside, improving safety. The new stove aims to make a positive difference for families in Guatemala.
In this catalogue you will find: Optical Fiber Test Equipments,Cable Preperation Tools,Fiber Optic Tool Kits,Fiber Optic Cleaning Solutions,Passive Optical Components,Polishing Equipments & Consumables.
Eta led laser marking machine eta 20-50 wMark Tung
This document introduces the ETA LED laser marking machine. It can mark a variety of materials used in industries like electronics, automotive, hardware, and more. The laser has powerful marking software, a small integrated design, high stability, low maintenance needs, and fast processing speeds. Optional rotating stations allow for automated plane and rotating marking. Models include the ETA-20W and ETA-50W lasers which have different power levels and specifications but both offer non-contact laser marking.
The SUN-OT7000 PON OTDR is a portable, lightweight instrument used to test fiber optic networks. It can measure fiber characteristics like length, loss, and splices. It identifies faults or breaks in fiber. It has a high resolution and short dead zone, making it suitable for testing short fibers. Auto measurement and analysis functions simplify testing and improve efficiency. It can test through splitters for PON networks.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
The document discusses Chroma ATE Inc., a leading supplier of test and measurement instrumentation. It provides an overview of Chroma, describing its founding, markets served, vision, global presence, and investment in R&D. The document then introduces several of Chroma's LED testing solutions, including automated wafer probers, in-line production test systems, and modules for electrical and optical measurement.
Wisely Laser manufactures high-performance fiber laser marking systems that offer engraving, cutting, marking and etching solutions. Their systems provide permanent identification marks on a variety of metal and plastic materials with high precision at fast speeds. Wisely Laser aims to support customers with technical assistance before, during, and after sales of their reliable and cost-effective fiber laser solutions.
This document provides product catalogs and specifications for several fiber optic network testing devices:
- An optical fiber fusion splicer that offers high-precision splicing with low loss for various fiber types. It has a lightweight design for field use.
- A specialized fusion splicer for FTTH drop cables and patch cords, with features for splicing these cable types.
- A handheld OTDR for installing and maintaining fiber networks, featuring simple operation, short dead zones, and automatic analysis.
- A PON OTDR designed for testing FTTx networks, with a short dead zone, fast testing and analysis, and support for 1x32 and 1x64 splitters.
- A handheld optical power
HUBUNGI :
PT.JEKLINDO CONSULTING
JL. GADING RAYA II NO. 20 RAWAMANGUN
JAKARTA TIMUR
TELP. 021-4759206
MOBILE : 08121942042, 081288416332
Email : jeklindo@gmail.com
WWW.izinusahaindonesia.com
Rube Goldberg was an American cartoonist, inventor, and engineer born in 1883 in San Francisco. He studied engineering at UC Berkeley but left his job as a city engineer to pursue cartooning. Goldberg is renowned for creating overly complex machines to perform simple tasks, and "Rube Goldberg machines" have become popular in films, TV shows, and media to showcase comedic inventions.
This document provides a summary of Alayne McLaren's film production experience from 1989 to 2015, listing over 50 productions she has worked on in locations including New Zealand, Australia, Japan, the UK, France, and India. Her roles have included production manager, location manager, production coordinator, researcher, and casting. She has worked on films, television commercials, documentaries, and other productions for clients such as the BBC, National Geographic, Discovery Channel, and various advertising agencies.
This document contains a summary of an individual named Rahul Pachori. It includes his contact information, educational background of a B-Tech degree from RTU University in 2015, work experience in building design with the Public Works Department, areas of interest in construction and design, and personal details.
The document describes the five basic components of a computer system: the input unit, output unit, storage unit, central processing unit (CPU), and arithmetic logic unit (ALU). The input unit accepts instructions and data and converts it to a computer-readable format. The output unit accepts results from the CPU and converts it to a human-readable format. The storage unit stores data, instructions, and intermediate and final results. The CPU controls all internal and external devices and performs arithmetic/logical operations. The ALU is where actual processing and calculations occur.
El documento describe la taxonomía de Bloom, un sistema de clasificación de objetivos educativos desarrollado en 1956. La taxonomía categoriza los objetivos en dominios cognitivo, afectivo y psicomotor. El dominio cognitivo incluye seis niveles de objetivos - conocimiento, comprensión, aplicación, análisis, síntesis y evaluación - que van de lo más simple a lo más complejo. Los maestros deben considerar estos niveles al planificar actividades para ayudar a los estudiantes a avanzar en su aprendizaje
El documento presenta el plan de estudios del programa de Contaduría Pública de una universidad. Incluye las asignaturas requeridas divididas en áreas como contabilidad, sistemas de información, legislación, finanzas y electivas. El plan consta de diez semestres con cuatro o cinco asignaturas por semestre y los créditos necesarios para completar el programa.
El documento describe las actividades de un invernadero escolar. Los estudiantes prepararon los bancales, plantaron diferentes vegetales como tomates, lechugas y papas. Regaron y cuidaron las plantas. Cosecharon lechugas para ensalada. Plantaron un cerezo. Esperan cosechar tomates y fresas antes de que termine el curso escolar. Combaten plagas de forma ecológica. Continuarán trabajando en el invernadero después de las vacaciones de verano.
Este documento proporciona instrucciones a los estudiantes sobre el proceso de matrícula académica para el primer período de 2015. Indica que la matrícula se realizará de forma manual de lunes a viernes de 3 a 7 pm, y que los estudiantes deben presentar el acta de matrícula diligenciada y el recibo de pago de la matrícula financiera. Además, recomienda a los estudiantes inscribirse en un máximo de 6 asignaturas según su plan de estudios, y asegurarse de cumplir con
Registers are groups of flip-flops that store binary data. An n-bit register contains n flip-flops and can store 2^n different states. Registers are used to store and provide digital data to logic circuits. There are different types of registers including shift registers. Shift registers can transfer data in serial-in serial-out, serial-in parallel-out, parallel-in serial-out, and parallel-in parallel-out modes. Counters are registers that increment their stored value on each clock pulse and are used to count events.
IBM anunció que ha desarrollado el ordenador cuántico más avanzado del mundo, el cual puede realizar operaciones en segundos que llevarían cientos de años a una persona. Hace unos años, los ordenadores cuánticos eran vistos más como una teoría que como una posibilidad práctica, pero la tecnología ha demostrado una vez más que puede ganarle al tiempo.
Cooking in homes in Guatemala is often done over open fires without ventilation, posing health risks. People for Guatemala has created a stove for the San Marin region with two burners that vents smoke outside, improving safety. The new stove aims to make a positive difference for families in Guatemala.
In this catalogue you will find: Optical Fiber Test Equipments,Cable Preperation Tools,Fiber Optic Tool Kits,Fiber Optic Cleaning Solutions,Passive Optical Components,Polishing Equipments & Consumables.
Eta led laser marking machine eta 20-50 wMark Tung
This document introduces the ETA LED laser marking machine. It can mark a variety of materials used in industries like electronics, automotive, hardware, and more. The laser has powerful marking software, a small integrated design, high stability, low maintenance needs, and fast processing speeds. Optional rotating stations allow for automated plane and rotating marking. Models include the ETA-20W and ETA-50W lasers which have different power levels and specifications but both offer non-contact laser marking.
The SUN-OT7000 PON OTDR is a portable, lightweight instrument used to test fiber optic networks. It can measure fiber characteristics like length, loss, and splices. It identifies faults or breaks in fiber. It has a high resolution and short dead zone, making it suitable for testing short fibers. Auto measurement and analysis functions simplify testing and improve efficiency. It can test through splitters for PON networks.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
The document discusses Chroma ATE Inc., a leading supplier of test and measurement instrumentation. It provides an overview of Chroma, describing its founding, markets served, vision, global presence, and investment in R&D. The document then introduces several of Chroma's LED testing solutions, including automated wafer probers, in-line production test systems, and modules for electrical and optical measurement.
Wisely Laser manufactures high-performance fiber laser marking systems that offer engraving, cutting, marking and etching solutions. Their systems provide permanent identification marks on a variety of metal and plastic materials with high precision at fast speeds. Wisely Laser aims to support customers with technical assistance before, during, and after sales of their reliable and cost-effective fiber laser solutions.
This document provides product catalogs and specifications for several fiber optic network testing devices:
- An optical fiber fusion splicer that offers high-precision splicing with low loss for various fiber types. It has a lightweight design for field use.
- A specialized fusion splicer for FTTH drop cables and patch cords, with features for splicing these cable types.
- A handheld OTDR for installing and maintaining fiber networks, featuring simple operation, short dead zones, and automatic analysis.
- A PON OTDR designed for testing FTTx networks, with a short dead zone, fast testing and analysis, and support for 1x32 and 1x64 splitters.
- A handheld optical power
This document provides product catalogs and specifications for several fiber optic network testing devices, including:
1. An optical fiber fusion splicer that offers high-precision splicing with low loss for various fiber types and adapts to different environments.
2. A specialized fusion splicer for FTTH drop cables and patch cords with features like lightweight design and precision core alignment.
3. A handheld OTDR for measuring fiber parameters like loss and connection quality to identify faults, compatible with various fiber types.
4. A PON OTDR designed for testing FTTx networks with a short dead zone and fast testing for event analysis.
5. A handheld optical power meter that identifies wavelengths
The Thermo Scientific NextGuard x-ray detection system provides cost-effective and sensitive detection of foreign objects in packaged food products. It uses a unique non-linear x-ray detector design that eliminates inspection blind spots and ensures 100% detection for any product size or shape. The system offers options for customization, easy maintenance, and is designed for use in compliance with worldwide food safety standards.
The document provides a summary report of Arab Lab Expo held in Dubai, UAE on November 3, 2013. It lists the event organizers, attendees from the company, and the most relevant exhibition stalls that were covered at the event. It then provides a table with 51 entries that describe various brands, the instruments/equipment displayed at their stalls, and brief details about the display and technologies. The report was compiled by Sreenath.S, an executive from Neopharma who attended the exhibition.
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-9000B or LMS-9000A) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.
Here you can see all HeatSign Laser Marking Machines include laser etching machine, fiber laser engraver, CO2 laser marking macine, industry laser marker, handheld portable laser engraving systems etc.
H. Fillunger was established in 1926 in India as a trading company and incorporated as a private limited company in 1957. It has three main divisions: LPG, which manufactures LPG regulators and components mainly for export; Vacuum, which manufactures high and ultra-high vacuum components for research in India; and Agency, which represents manufacturers of industrial materials and equipment. The Vacuum Division launched its first product in 1959 and now manufactures a wide range of vacuum equipment and components used in research.
“Conation Technologies” are committed to offer quality control lab equipment like Metallurgical
and Mechanical Testing Machines to our customers with latest and best technologies at affordable prices.
Our product range includes Metallurgical Microscopes, Universal Microscopes, Portable Microscopes,
Stereozooms, Metallurgical Image Analyzer, Image Analyzers for welding analysis, fibre analysis,
clinker analysis etc., Cleanliness (Millipore Filter Paper) Analysis System, Microhardness Testers,Metallurgical Sample Preparation Machines, Mechanical Testing Machines,Jominy End Quench Test set-up, and Special Purpose Machines.
Cytation 3 combines automated digital microscopy and conventional microplate reading in one instrument. It features temperature control, gas control, orbital shaking, and support for time lapse studies, making it ideal for live-cell assays and research applications in cell biology. The instrument allows for hit-picking wells for imaging based on criteria to reduce data collection and image quality control. In contrast to complex interfaces, BioTek's Gen5 software is specifically designed for those familiar with microplate software and requires minimal training. Cytation 3 offers both high performance filter-based optics and high-flexibility monochromator optics for application versatility.
Cytation 3 combines automated digital microscopy and conventional microplate reading in one instrument. It features temperature control, gas control, orbital shaking, and support for time lapse studies, making it ideal for live-cell assays and research applications in cell biology. The instrument allows for hit-picking wells for imaging based on criteria, reducing data collection and image quality control. It offers both high performance filter-based optics and high-flexibility monochromator optics for application versatility.
20160219 - M. Agostini - Nuove tecnologie per lo studio del DNA tumorale libe...Roberto Scarafia
Nano Inspired Biomedicine Laboratory
1 Department of Surgical, Oncological and Gastroenterological Sciences, University of Padua, Italy.
2 Istituto di Ricerca Pediatrica- Città della Speranza, Padova, Italy.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Building RAG with self-deployed Milvus vector database and Snowpark Container...Zilliz
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
1. 755S UV-VIS Spectrophotometer
Our main business scope is laboratory equipment and medical equipment. Mainly cover:
Laboratory Equipment (instruments, glassware, and plastic consumables), Scientific
instrument, Educational Apparatus, Medical Equipments, Hospital Equipments, etc.
Here is some info about this uv visible spectrophotometers:
Display Mode: Backlight digital LCD
Lamp: Patent assembled Hamamatsu L2D2 long life Deuterium Lamp and RoYal long
life Halogen-Tungsten Lamp
Optical system: C-T configuration diffraction grating monochromator
Interface:RS232 Serial port
Dimensions: 370/360/200 mm
Weight: 10Kg
Features:
* Whole aluminum metal alloy die-castings.
* 128*64 dots back illuminated wide screen LCD display.
* Patent assembled pre-aligned deuterium and halogen-tungsten lamp, long life and
simple maintenance. Spectral energy correct system.
* Advanced optical system ensures low stray light.
* Built in SCM technology, auto 0%, auto 100%, error-free T/A transformation.
* Decimal system keyboard, transmittance test, absorbance test, concentration factor
setting or concentration direct readout functions.
* As much as 24 items of working curve equations can be preserved for long time.
* First order curve fitting can be performed.
* Data printout by mini printer.
* Spacious sample compartment, 4 position cuvette rack, suitable for 1-5 cm optical
path rectangular cuvettes.
2. Standard Configuration:
1) 755S spectrophotometer 1 set
2) Power cable 1 pc
3) User Manual 1 pc
4) Certificate of quality checking 1 pc
5) Fuses (2A) 2 pcs
6) 1cm glass cuvette 2 pairs
7) 1cm quartz cuvette 1 pair
8) 1cm 4 position cuvette rack 1 pc
9) Packing list 1 pc
10)Mini printer 1 set
Optional Accessories:
1) Fuse (2A/3A)
2) Assembled pre-aligned deuterium and halogen-tungsten lamp
3) Glass cuvette 1 cm, 2 cm, 3 cm, 5cm
4) Quartz cuvette 1cm, 2cm, 3cm, 5cm
5) 5 cm cuvette rack (adaptable for 1-5cm cuvette)
6) Praseodymium-Neodymium optical filter
7) Holmium oxide optical filter
8) Mini printer
9) Printer cable
10) Data processing software package
11) Communication cable
There are many other kinds of spectrophotometer uv vis, you can view more products
on our official websites. Please feel free to contact us if you have any problem with our
products.