This document provides 7 tips for performing cross-disciplinary BIM coordination including accurately placing 3D models together using the same coordinate system, selecting the right BIM coordination tools such as Navisworks and iFieldSmart Technologies, exporting 3D models to IFC format to combine models from different software, merging 3D models into a single coordinated model, specifying the scope of model checking for interferences and data accuracy, creating rules for model checking, and carrying out 3D model checks and sending out clash detection reports. The summary emphasizes that iFieldSmart Technologies is an end-to-end construction management tool that facilitates connected construction through a single dashboard.

1. 7 pro tips to perform cross-
disciplinary BIM coordination.
What is multidisciplinary coordination in Building Information Modeling (BIM)?
Multi-trade coordination or multi-disciplinary coordination involves workflows and tools to
combine 3D models from Architectural, Structural, MEP, and FP disciplines. Cross-disciplinary
BIM coordination supports collision detection and resolution and drives higher data accuracy &
validity with preemptive collision reports, coordination meetings, viewpoint creation, RFIs,
submittals, etc. The most common form of BIM coordination is model interference checking.
Collisions or clashes can be identified as hard and soft clashes. Structural engineers create a
load-bearing wall and HVAC engineers model an air-conditioning system. There is a probability
of HVAC systems interfering with load-bearing walls causing a clash. These clashes need to be
reported to the design team in the preconstruction stage.

2. Tip # 1:
Place models accurately with each other.
3D models need to be set precisely. Indifferent coordinate systems or dimensional inaccuracies
can create collisions when models are combined. 3D models from multiple disciplines need to
be combined within the same coordinate system with higher accuracy. BIM modelers need to
understand a dual coordinate system exists in Revit – Shared and Internal coordinates.
Understanding Survey Points and Project Base Points support improved model placement.
Linking models, using Worksets, and understanding the difference between Project North and
True North drives accurate model placement between various disciplines.
Tip # 2:
Select the right BIM coordination tools.

3. There are various BIM coordination tools available and their selection depends on the
application. Asking 3 simple questions can make it simple to select the right BIM coordination
tools.
▪ Is the 3D model or document generated in a single program or multiple programs?
▪ What are the tools used by the company for interdisciplinary BIM coordination?
▪ Are the BIM coordination tools supported by a license?
3D BIM modeling programs like Revit reinforce modeling teams to identify collisions. Tools like
iFieldSmart Technologies can be used to identify and resolve clashes and create viewpoints.
Levelwise and trade-wise clashes make it easier to identify and resolve clashes and visualize
graphical reports. A Common Data Environment or CDE provides teams the capability to
conduct interference checks with tools like Navisworks and iFieldSmart Technologies. Keeping
3D models, drawings, and other documentation on a single cloud platform can coordinate
trades seamlessly across the entire project. Advanced model coordination tools provide endless
possibilities to detect interferences, build coordination reports, and share them with other
teams in the project. These advanced tools include Navisworks Manage, iFieldSmart
Technologies, Solibri, etc.
Tip # 3:
Exporting 3D models to IFC format.
For multidisciplinary coordination, project teams deploy various 3D BIM modeling software.
Connected construction requires the utilization of tools or software like Revit, Navisworks,
Tekla, and iFieldSmart Technologies. Each software produces files in different formats.
However, BIM modelers must combine and generate a 3D model in IFC format with BIM
coordination. Producing an accurate IFC file requires precise data mapping from native file
formats to IFC.

4. Tip # 4:
Merging 3D models into a single multidisciplinary 3D model.
Multiple IFC models can be combined into a single coordinated model. This serves as a base for
preemptive BIM coordination. Revit can be used to add 3D models from various categories with
the appropriate rules and checklists. This helps identify and classify collisions whilst setting
rules.
Tip # 5:
Specify the purview of model checking.
▪ After the models have been coordinated, it is important to identify the scope of BIM
coordination. Answering questions can support specifying the scope of checking
3Dmodels.
▪ Are the 3D models only checked for interferences or data accuracy or validity?
▪ Is the space validation accurate? Do modeled spaces meet design conditions?
▪ Are the installations modeled accurately with accurate distances from construction
components?
▪ Does the coordination include assessing installation distances and following standards?
Answers to the above questions make it easier to model quicker, detect interferences, identify
missing data, etc.
Tip # 6:
Check model checking rules.
Creating model checking rules or user-defined rules to specify elements for model checking and
conditions. For example, BIM coordination can be deployed to check collisions between air
conditioning models and architectural models. BIM tools provide teams with filtering,
classification, and group rules to check what is needed. The very need to specify rules for model
checking can be extensive, yet powerful.
Tip # 7:
Carrying out a 3D model check and sending out reports.
Checking a 3D model with predefined rules or using tools like iFieldSmart Technologies helps
identify collisions early in the preconstruction stage. Issue management reports that can be

5. filtered trade-wise or level-wise can be leveraged. These reports can be shared with multiple
teams and disciplines to resolve clashes. Construction management tools from iFieldSmart
Technologies make it easier to assign multiple tasks through task management. Clash
coordination dashboard from iFieldSmart showcases extensive clash data for mechanical,
electrical, structure, plumbing, etc. Open or overdue status helps teams identify and resolve
clashes quicker.
Summary.
iFieldSmart Technologies is an end-to-end construction management tool that drives connected
construction for various teams – back office and field teams. An easy-to-use single dashboard
provides comprehensive project information for field teams to coordinate with other team
members. For more information on iFieldSmart Technologies, schedule a demo.