1. Chapter 6: Integrity and SecurityChapter 6: Integrity and Security
Domain Constraints
Referential Integrity
Assertions
Triggers
Security
Authorization
Authorization in SQL
2. Domain ConstraintsDomain Constraints
Integrity constraints guard against accidental damage to the
database, by ensuring that authorized changes to the database do
not result in a loss of data consistency.
Domain constraints are the most elementary form of integrity
constraint.
They test values inserted in the database, and test queries to
ensure that the comparisons make sense.
New domains can be created from existing data types
E.g. create domain Dollars numeric(12, 2)
create domain Pounds numeric(12,2)
We cannot assign or compare a value of type Dollars to a value of
type Pounds.
However, we can convert type as below
(cast r.A as Pounds)
(Should also multiply by the dollar-to-pound conversion-rate)
3. Domain Constraints (Cont.)Domain Constraints (Cont.)
The check clause in SQL-92 permits domains to be restricted:
Use check clause to ensure that an hourly-wage domain allows
only values greater than a specified value.
create domain hourly-wage numeric(5,2)
constraint value-test check(value > = 4.00)
The domain has a constraint that ensures that the hourly-wage is
greater than 4.00
The clause constraint value-test is optional; useful to indicate
which constraint an update violated.
Can have complex conditions in domain check
create domain AccountType char(10)
constraint account-type-test
check (value in (‘Checking’, ‘Saving’))
check (branch-name in (select branch-name from branch))
4. Referential IntegrityReferential Integrity
Ensures that a value that appears in one relation for a given set of
attributes also appears for a certain set of attributes in another
relation.
Example: If “Perryridge” is a branch name appearing in one of the
tuples in the account relation, then there exists a tuple in the branch
relation for branch “Perryridge”.
Formal Definition
Let r1(R1) and r2(R2) be relations with primary keys K1 and K2
respectively.
The subset α of R2 is a foreign key referencing K1 in relation r1, if for
every t2 in r2 there must be a tuple t1 in r1 such that t1[K1] = t2[α].
Referential integrity constraint also called subset dependency since its
can be written as
∏α (r2) ⊆ ∏K1 (r1)
5. Referential Integrity in the E-R
ModelModel
Consider relationship set R between entity sets E1 and E2. The
relational schema for R includes the primary keys K1 of E1and K2
of E2.
Then K1 and K2 form foreign keys on the relational schemas for E1
and E2 respectively.
Weak entity sets are also a source of referential integrity
constraints. For the relation schema for a weak entity set must
include the primary key of the entity set on which it depends.
RE1 E2
6. Checking Referential Integrity onChecking Referential Integrity on
Database ModificationDatabase Modification
The following tests must be made in order to preserve the
following referential integrity constraint:
∏α(r2) ⊆ ∏K (r1)
Insert. If a tuple t2 is inserted into r2, the system must
ensure that there is a tuple t1 in r1 such that t1[K] = t2[α]. That
is
t2[α] ∈ ∏K (r1)
Delete. If a tuple, t1 is deleted from r1, the system must
compute the set of tuples in r2 that reference t1:
σα= t1[K] (r2)
If this set is not empty, either the delete command is rejected
as an error, or the tuples that reference t1 must themselves
be deleted (cascading deletions are possible).
7. Database Modification (Cont.)Database Modification (Cont.)
Update. There are two cases:
If a tuple t2 is updated in relation r2 and the update modifies
values for foreign key α, then a test similar to the insert case is
made. Let t2’ denote the new value of tuple t2. The system must
ensure that
t2’[α] ∈ ∏K(r1)
If a tuple t1 is updated in r1, and the update modifies values for
the primary key (K), then a test similar to the delete case is
made. The system must compute
σα = t1[K] (r2)
using the old value of t1 (the value before the update is applied).
If this set is not empty, the update may be rejected as an error,
or the update may be cascaded to the tuples in the set, or the
tuples in the set may be deleted.
8. Referential Integrity in SQLReferential Integrity in SQL
Primary and candidate keys and foreign keys can be specified as
part of the SQL create table statement:
The primary key clause of the create table statement includes a
list of the attributes that comprise the primary key.
The unique key clause of the create table statement includes a
list of the attributes that comprise a candidate key.
The foreign key clause of the create table statement includes
both a list of the attributes that comprise the foreign key and the
name of the relation referenced by the foreign key.
11. Cascading Actions in SQLCascading Actions in SQL
create table account
. . .
foreign key(branch-name) references branch
on delete cascade
on update cascade
. . . )
Due to the on delete cascade clauses, if a delete of a tuple in
branch results in referential-integrity constraint violation, the
delete “cascades” to the account relation, deleting the tuple that
refers to the branch that was deleted.
Cascading updates are similar.
12. Cascading Actions in SQL (Cont.)Cascading Actions in SQL (Cont.)
If there is a chain of foreign-key dependencies across multiple
relations, with on delete cascade specified for each
dependency, a deletion or update at one end of the chain can
propagate across the entire chain.
If a cascading update to delete causes a constraint violation that
cannot be handled by a further cascading operation, the system
aborts the transaction. As a result, all the changes caused by
the transaction and its cascading actions are undone.
Referential integrity is only checked at the end of a transaction
Intermediate steps are allowed to violate referential integrity
provided later steps remove the violation
Otherwise it would be impossible to create some database states,
e.g. insert two tuples whose foreign keys point to each other (e.g.
spouse attribute of relation marriedperson)
13. Referential Integrity in SQL (Cont.)Referential Integrity in SQL (Cont.)
Alternative to cascading:
on delete set null
on delete set default
Null values in foreign key attributes complicate SQL referential
integrity semantics, and are best prevented using not null
if any attribute of a foreign key is null, the tuple is defined to satisfy
the foreign key constraint!
14. AssertionsAssertions
An assertion is a predicate expressing a condition that we wish
the database always to satisfy.
An assertion in SQL takes the form
create assertion <assertion-name> check <predicate>
When an assertion is made, the system tests it for validity, and
tests it again on every update that may violate the assertion
This testing may introduce a significant amount of overhead; hence
assertions should be used with great care.
Asserting
for all X, P(X)
is achieved in a round-about fashion using
not exists X such that not P(X)
15. Assertion ExampleAssertion Example
The sum of all loan amounts for each branch must be less than
the sum of all account balances at the branch.
create assertion sum-constraint check
(not exists (select * from branch
where (select sum(amount) from loan
where loan.branch-name =
branch.branch-name)
>= (select sum(amount) from account
where loan.branch-name =
branch.branch-name)))
16. Assertion ExampleAssertion Example
Every loan has at least one borrower who maintains an account with
a minimum balance or $1000.00
create assertion balance-constraint check
(not exists (
select * from loan
where not exists (
select *
from borrower, depositor, account
where loan loan-number = borrower loan-number
and borrower customer-name =
depositor customer-name
and depositor account-number =
account.account-number
and account balance >= 1000)))
17. TriggersTriggers
A trigger is a statement that is executed automatically by the
system as a side effect of a modification to the database.
To design a trigger mechanism, we must:
Specify the conditions under which the trigger is to be executed.
Specify the actions to be taken when the trigger executes.
Triggers introduced to SQL standard in SQL:1999, but supported
even earlier using non-standard syntax by most databases.
18. Trigger ExampleTrigger Example
Suppose that instead of allowing negative account balances, the
bank deals with overdrafts by
setting the account balance to zero
creating a loan in the amount of the overdraft
giving this loan a loan number identical to the account number of the
overdrawn account
The condition for executing the trigger is an update to the
account relation that results in a negative balance value.
19. Trigger Example in SQL:1999Trigger Example in SQL:1999
create trigger overdraft-trigger after update on account
referencing new row as nrow
for each row
when nrow.balance < 0
begin atomic
insert into borrower
(select customer-name, account-number
from depositor
where nrow.account-number =
depositor.account-number);
insert into loan values
(n.row.account-number, nrow.branch-name,
– nrow.balance);
update account set balance = 0
where account.account-number = nrow.account-number
end
20. Triggering Events and Actions in
SQLSQL
Triggering event can be insert, delete or update
Triggers on update can be restricted to specific attributes
E.g. create trigger overdraft-trigger after update of balance on
account
Values of attributes before and after an update can be referenced
referencing old row as : for deletes and updates
referencing new row as : for inserts and updates
Triggers can be activated before an event, which can serve as extra
constraints. E.g. convert blanks to null.
create trigger setnull-trigger before update on r
referencing new row as nrow
for each row
when nrow.phone-number = ‘ ‘
set nrow.phone-number = null
21. Statement Level TriggersStatement Level Triggers
Instead of executing a separate action for each affected row, a
single action can be executed for all rows affected by a single
transaction
Use for each statement instead of for each row
Use referencing old table or referencing new table to
refer to temporary tables containing the affected rows
Can be more efficient when dealing with SQL statements that
update a large number of rows
22. External World ActionsExternal World Actions
We sometimes require external world actions, such as re-ordering
an item whose quantity in a warehouse has become small, or
turning on an alarm light, to be triggered on a database update
Triggers cannot be used to directly implement external-world
actions, BUT
Triggers can be used to record actions-to-be-taken in a separate table,
and we can have an external process that repeatedly scans the table
and carries out external-world actions.
E.g. Suppose a warehouse has the following tables
inventory(item, level): How much of each item is in the warehouse
minlevel(item, level) : What is the minimum desired level of each item
reorder(item, amount): What quantity should we re-order at a time
orders(item, amount) : Orders to be placed (read by external process)
23. External World Actions (Cont.)External World Actions (Cont.)
create trigger reorder-trigger after update of amount on
inventory
referencing old row as orow, new row as nrow
for each row
when nrow.level < = (select level
from minlevel
where minlevel.item = orow.item)
and orow.level > (select level
from minlevel
where minlevel.item = orow.item)
begin
insert into orders
(select item, amount
from reorder
where reorder.item = orow.item)
end
24. Triggers in MS-SQLServer SyntaxTriggers in MS-SQLServer Syntax
create trigger overdraft-trigger on account
for update
as
if nrow.balance < 0
begin
insert into borrower
(select customer-name,account-number
from depositor, inserted
where inserted.account-number =
depositor.account-number)
insert into loan values
(inserted.account-number, inserted.branch-name,
– inserted.balance)
update account set balance = 0
from account, inserted
where account.account-number = inserted.account-
number
end
25. When Not To Use TriggersWhen Not To Use Triggers
Triggers were used earlier for tasks such as
maintaining summary data (e.g. total salary of each department)
Replicating databases by recording changes to special relations
(called change or delta relations) and having a separate process
that applies the changes over to a replica
There are better ways of doing these now:
Databases today provide built in materialized view facilities to
maintain summary data
Databases provide built-in support for replication
Encapsulation facilities can be used instead of triggers in many
cases
Define methods to update fields
Carry out actions as part of the update methods instead of through a
trigger
26. SecuritySecurity
Security - protection from malicious attempts to steal or modify data.
Database system level
Authentication and authorization mechanisms to allow specific users
access only to required data
We concentrate on authorization in the rest of this chapter
Operating system level
Operating system super-users can do anything they want to the
database! Good operating system level security is required.
Network level: must use encryption to prevent
Eavesdropping (unauthorized reading of messages)
Masquerading (pretending to be an authorized user or sending
messages supposedly from authorized users)
27. Security (Cont.)Security (Cont.)
Physical level
Physical access to computers allows destruction of data by
intruders; traditional lock-and-key security is needed
Computers must also be protected from floods, fire, etc.
– More in Chapter 17 (Recovery)
Human level
Users must be screened to ensure that an authorized users do
not give access to intruders
Users should be trained on password selection and secrecy
28. AuthorizationAuthorization
Forms of authorization on parts of the database:
Read authorization - allows reading, but not modification of
data.
Insert authorization - allows insertion of new data, but not
modification of existing data.
Update authorization - allows modification, but not deletion of
data.
Delete authorization - allows deletion of data
29. Authorization (Cont.)Authorization (Cont.)
Forms of authorization to modify the database schema:
Index authorization - allows creation and deletion of indices.
Resources authorization - allows creation of new relations.
Alteration authorization - allows addition or deletion of attributes
in a relation.
Drop authorization - allows deletion of relations.
30. Authorization and ViewsAuthorization and Views
Users can be given authorization on views, without being given
any authorization on the relations used in the view definition
Ability of views to hide data serves both to simplify usage of the
system and to enhance security by allowing users access only to
data they need for their job
A combination or relational-level security and view-level security
can be used to limit a user’s access to precisely the data that
user needs.
31. View ExampleView Example
Suppose a bank clerk needs to know the names of the
customers of each branch, but is not authorized to see specific
loan information.
Approach: Deny direct access to the loan relation, but grant access
to the view cust-loan, which consists only of the names of
customers and the branches at which they have a loan.
The cust-loan view is defined in SQL as follows:
create view cust-loan as
select branchname, customer-name
from borrower, loan
where borrower.loan-number = loan.loan-number
32. View Example (Cont.)View Example (Cont.)
The clerk is authorized to see the result of the query:
select *
from cust-loan
When the query processor translates the result into a query on
the actual relations in the database, we obtain a query on
borrower and loan.
Authorization must be checked on the clerk’s query before query
processing begins.
33. Authorization on ViewsAuthorization on Views
Creation of view does not require resources authorization since
no real relation is being created
The creator of a view gets only those privileges that provide no
additional authorization beyond that he already had.
E.g. if creator of view cust-loan had only read authorization on
borrower and loan, he gets only read authorization on cust-loan
34. Granting of PrivilegesGranting of Privileges
The passage of authorization from one user to another may be
represented by an authorization graph.
The nodes of this graph are the users.
The root of the graph is the database administrator.
Consider graph for update authorization on loan.
An edge Ui →Uj indicates that user Ui has granted update
authorization on loan to Uj.
U1 U4
U2 U5
U3
DBA
35. Authorization Grant GraphAuthorization Grant Graph
Requirement: All edges in an authorization graph must be part of
some path originating with the database administrator
If DBA revokes grant from U1:
Grant must be revoked from U4 since U1 no longer has authorization
Grant must not be revoked from U5 since U5 has another
authorization path from DBA through U2
Must prevent cycles of grants with no path from the root:
DBA grants authorization to U7
U7 grants authorization to U8
U8 grants authorization to U7
DBA revokes authorization from U7
Must revoke grant U7 to U8 and from U8 to U7 since there is no
path from DBA to U7 or to U8 anymore.
36. Security Specification in SQLSecurity Specification in SQL
The grant statement is used to confer authorization
grant <privilege list>
on <relation name or view name> to <user list>
<user list> is:
a user-id
public, which allows all valid users the privilege granted
A role (more on this later)
Granting a privilege on a view does not imply granting any
privileges on the underlying relations.
The grantor of the privilege must already hold the privilege on the
specified item (or be the database administrator).
37. Privileges in SQLPrivileges in SQL
select: allows read access to relation,or the ability to query using
the view
Example: grant users U1, U2, and U3 select authorization on the branch
relation:
grant select on branch to U1, U2, U3
insert: the ability to insert tuples
update: the ability to update using the SQL update statement
delete: the ability to delete tuples.
references: ability to declare foreign keys when creating relations.
usage: In SQL-92; authorizes a user to use a specified domain
all privileges: used as a short form for all the allowable privileges
38. Privilege To Grant PrivilegesPrivilege To Grant Privileges
with grant option: allows a user who is granted a privilege to
pass the privilege on to other users.
Example:
grant select on branch to U1 with grant option
gives U1 the select privileges on branch and allows U1 to grant this
privilege to others
39. RolesRoles
Roles permit common privileges for a class of users can be
specified just once by creating a corresponding “role”
Privileges can be granted to or revoked from roles, just like user
Roles can be assigned to users, and even to other roles
SQL:1999 supports roles
create role teller
create role manager
grant select on branch to teller
grant update (balance) on account to teller
grant all privileges on account to manager
grant teller to manager
grant teller to alice, bob
grant manager to avi
40. Revoking Authorization in SQLRevoking Authorization in SQL
The revoke statement is used to revoke authorization.
revoke<privilege list>
on <relation name or view name> from <user list> [restrict|
cascade]
Example:
revoke select on branch from U1, U2, U3 cascade
Revocation of a privilege from a user may cause other users also
to lose that privilege; referred to as cascading of the revoke.
We can prevent cascading by specifying restrict:
revoke select on branch from U1, U2, U3 restrict
With restrict, the revoke command fails if cascading revokes
are required.
41. Revoking Authorization in SQL
(Cont.)(Cont.)
<privilege-list> may be all to revoke all privileges the revokee
may hold.
If <revokee-list> includes public all users lose the privilege
except those granted it explicitly.
If the same privilege was granted twice to the same user by
different grantees, the user may retain the privilege after the
revocation.
All privileges that depend on the privilege being revoked are also
revoked.
42. Limitations of SQL AuthorizationLimitations of SQL Authorization
SQL does not support authorization at a tuple level
E.g. we cannot restrict students to see only (the tuples storing) their
own grades
All end-users of an application (such as a web application) may
be mapped to a single database user
The task of authorization in above cases falls on the application
program, with no support from SQL
Authorization must be done in application code, and may be
dispersed all over an application
Checking for absence of authorization loopholes becomes very
difficult since it requires reading large amounts of application code
43. EncryptionEncryption
Data may be encrypted when database authorization provisions
do not offer sufficient protection.
Properties of good encryption technique:
Relatively simple for authorized users to encrypt and decrypt data.
Encryption scheme depends not on the secrecy of the algorithm but
on the secrecy of a parameter of the algorithm called the
encryption key.
Extremely difficult for an intruder to determine the encryption key.
44. Encryption (Cont.)Encryption (Cont.)
Data Encryption Standard (DES) substitutes characters and rearranges
their order on the basis of an encryption key which is provided to
authorized users via a secure mechanism. Scheme is no more secure
than the key transmission mechanism since the key has to be shared.
Advanced Encryption Standard (AES) is a new standard replacing DES,
and is based on the Rijndael algorithm, but is also dependent on shared
secret keys
Public-key encryption is based on each user having two keys:
public key – publicly published key used to encrypt data, but cannot be used
to decrypt data
private key -- key known only to individual user, and used to decrypt data.
Need not be transmitted to the site doing encryption.
Encryption scheme is such that it is impossible or extremely hard to
decrypt data given only the public key.
The RSA public-key encryption scheme is based on the hardness of
factoring a very large number (100's of digits) into its prime
components.
45. AuthenticationAuthentication
Password based authentication is widely used, but is susceptible
to sniffing on a network
Challenge-response systems avoid transmission of
passwords
DB sends a (randomly generated) challenge string to user
User encrypts string and returns result.
DB verifies identity by decrypting result
Can use public-key encryption system by DB sending a message
encrypted using user’s public key, and user decrypting and sending
the message back
Digital signatures are used to verify authenticity of data
E.g. use private key (in reverse) to encrypt data, and anyone can
verify authenticity by using public key (in reverse) to decrypt data.
Only holder of private key could have created the encrypted data.
Digital signatures also help ensure nonrepudiation: sender
cannot later claim to have not created the data
47. Statistical DatabasesStatistical Databases
Problem: how to ensure privacy of individuals while allowing use
of data for statistical purposes (e.g., finding median income,
average bank balance etc.)
Solutions:
System rejects any query that involves fewer than some
predetermined number of individuals.
∗ Still possible to use results of multiple overlapping queries to
deduce data about an individual
Data pollution -- random falsification of data provided in response to
a query.
Random modification of the query itself.
There is a tradeoff between accuracy and security.
52. Physical Level SecurityPhysical Level Security
Protection of equipment from floods, power failure, etc.
Protection of disks from theft, erasure, physical damage, etc.
Protection of network and terminal cables from wiretaps non-
invasive electronic eavesdropping, physical damage, etc.
Solutions:
Replicated hardware:
mirrored disks, dual busses, etc.
multiple access paths between every pair of devises
Physical security: locks,police, etc.
Software techniques to detect physical security breaches.
53. Human Level SecurityHuman Level Security
Protection from stolen passwords, sabotage, etc.
Primarily a management problem:
Frequent change of passwords
Use of “non-guessable” passwords
Log all invalid access attempts
Data audits
Careful hiring practices
54. Operating System Level SecurityOperating System Level Security
Protection from invalid logins
File-level access protection (often not very helpful for database
security)
Protection from improper use of “superuser” authority.
Protection from improper use of privileged machine intructions.
55. Network-Level SecurityNetwork-Level Security
Each site must ensure that it communicate with trusted sites (not
intruders).
Links must be protected from theft or modification of messages
Mechanisms:
Identification protocol (password-based),
Cryptography.
56. Database-Level SecurityDatabase-Level Security
Assume security at network, operating system, human, and
physical levels.
Database specific issues:
each user may have authority to read only part of the data and to
write only part of the data.
User authority may correspond to entire files or relations, but it may
also correspond only to parts of files or relations.
Local autonomy suggests site-level authorization control in a
distributed database.
Global control suggests centralized control.
