5.8 g hz external wireless rubber duck antenna 2d bi
•
0 likes•8 views
This document provides specifications for a 5.8 GHz external wireless rubber duck antenna with a gain of 2 dBi. Key specifications include an operating frequency range of 5150-5850 MHz, vertical polarization, omnidirectional radiation, an SMA connector, dimensions of 13*392 mm, an operating temperature range of -40°C to 85°C, and applications including 5.8GHz WLAN systems and Wi-Fi.
Report
Share
Report
Share
Download to read offline
Recommended
Moletrac brochure dom_09-2012
The document introduces the MOLETRAC system, a front locating accessory kit for HammerHead piercing tools that allows users to track the tool up to 10 feet deep. It uses proven Ditch Witch electronics, including the BI Impact Beacon transmitter with a 24-hour battery life and the 250R receiver to monitor position, depth and direction of the bore. The MOLETRAC kit is compatible with various HammerHead Mole models and provides a reliable way to locate piercing tools.
RIVPF_GB_LOCAL
This document describes an IR flame detector model RIV-601P/F and RIV-601P/FA. It provides specifications for the detectors such as operating voltage, current draw, alarm delay time, output relay, temperature range, dimensions, approvals. The RIV-601P/FA model adds an explosion-proof enclosure. Accessories include variable direction stands for adjusting the detector angle horizontally and vertically.
Seaward KD1E Digital High Voltage HV Indicators & Detectors - KD1E/15D 15kV &...
Seaward KD1E Digital High Voltage HV Indicators & Detectors - KD1E/15D 15kV &...Thorne & Derrick International
Seaward Digital Readout High Voltage Indicators are used as a potential indicator to determine presence of voltage or as a voltmeter. The high voltage detectors have a robust display housing, no switches and low battery indicator. The Seaward digital indicator also provides direct reading of voltage measurements. Seaward digital high voltage indicators are supplied with a battery charger and a specifically designed carrying case for unit and accessories.
Seaward KD1E Digital High Voltage Indicator & Detector Specifications:
Use as a potential indicator to determine presence of voltage or as a voltmeter
Robust display housing
No switches
Provides direct reading of voltage measurements
Low battery indicator
Supplied with battery charger
Specifically designed carrying case for unit and accessories
Seaward KD1E/15D 15kV Digital High Voltage Indicator & Detector
Seaward KD1E/15D digital high voltage detector is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 15kV.
Seaward KD1E/15D 15kV Digital High Voltage Indicator & Detector Features:
Maximum System Voltage: 15kV
KD1E/15D Resolution: 10V
Maximum Voltage to Earth: 8.6kV
Seaward KD1E/15D Part No - 109A910
Seaward KD1E/15D Digital High Voltage Indicator Dimensions: Length: 600mm Diameter: 25mm Handle Length: 235mm Hand Guard Height: 23.5mm
Seaward KD1E/33D 33kV Digital High Voltage Indicator & Detector
Seaward KD1E/33D digital high voltage detector is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 33kV.
Seaward KD1E/33D 33kV Digital High Voltage Indicator & Detector Features:
Maximum System Voltage: 33kV
KD1E/33D Resolution: 100V
Maximum Voltage to Earth: 19kV
Seaward KD1E/33D Part No - 109A911
Seaward KD1E/33D Digital High Voltage Indicator Dimensions: Length: 600mm Diameter: 25mm Handle Length: 235mm Hand Guard Height: 23.5mm
Seaward KD1E Digital High Voltage Indicator Accessories
Seaward PH3 Unit
Proving Unit for proof testing high voltage indicators
High Voltage output 1200V-1500DC
Self Test Facility
Avoids use of known supply points or bulky test equipment
Seaward Bent End Adaptors
90 degrees Standard, 120 degrees on request
Suitable for use on vertical typre switchgear
Seaward Extension Rod
1.5m extension rod for use on overhead lines
Suitable for use with KDIE/15D, KDIE/33D, PR15D & PR33D
Ultrasonic level
The Microflex LR MI transmitter with display and Microflex LR MS smart instrument are available with four acoustic frequencies to reliably track levels under extreme conditions. They have ATEX certification for hazardous areas and can operate from 9-24VDC with optional relays and low power modes. The Ranger 1000 and 3000 ultrasonic level transmitters have integral displays, IP67 ratings, and simple programming for measuring liquids and solids within specified ranges and resolutions.
Drager Flame 2300 - Fixed Flame Detector - Spec Sheet
The Dräger Flame 2300 is an explosion proof combined UV/IR flame detector that can detect hydrocarbon fires. It has a flexible design with multiple output and installation options. It is reliable in detecting fires with high immunity to false alarms by requiring both UV and IR sensors to detect a fire. It is approved for worldwide use under various certifications.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Ac voltage-detector data sheet
The document describes an AC Voltage Detector with Relay that monitors the presence or absence of AC voltage between 50-250VAC. It connects to environmental monitoring systems using a 2-wire cable up to 1,000 feet long. The internal relay closes when voltage is detected above 60VAC and opens below 55VAC. It is available with either a NEMA 5-15 plug or IEC C14 socket and can interface with various electrical and sensor devices.
Growatt 30000 40000
The document provides specifications for Growatt solar inverters ranging from 30kW to 40kW. Key details include maximum efficiency of 98.2%, internal DC switch, compact design, multi MPP controller, Ethernet/WiFi connectivity, and comprehensive warranty programs. The inverters have transformerless design, IP65 rating, and operate from 180V to 1000V DC input voltage at up to 1000V maximum.
Recommended
Moletrac brochure dom_09-2012
The document introduces the MOLETRAC system, a front locating accessory kit for HammerHead piercing tools that allows users to track the tool up to 10 feet deep. It uses proven Ditch Witch electronics, including the BI Impact Beacon transmitter with a 24-hour battery life and the 250R receiver to monitor position, depth and direction of the bore. The MOLETRAC kit is compatible with various HammerHead Mole models and provides a reliable way to locate piercing tools.
RIVPF_GB_LOCAL
This document describes an IR flame detector model RIV-601P/F and RIV-601P/FA. It provides specifications for the detectors such as operating voltage, current draw, alarm delay time, output relay, temperature range, dimensions, approvals. The RIV-601P/FA model adds an explosion-proof enclosure. Accessories include variable direction stands for adjusting the detector angle horizontally and vertically.
Seaward KD1E Digital High Voltage HV Indicators & Detectors - KD1E/15D 15kV &...
Seaward KD1E Digital High Voltage HV Indicators & Detectors - KD1E/15D 15kV &...Thorne & Derrick International
Seaward Digital Readout High Voltage Indicators are used as a potential indicator to determine presence of voltage or as a voltmeter. The high voltage detectors have a robust display housing, no switches and low battery indicator. The Seaward digital indicator also provides direct reading of voltage measurements. Seaward digital high voltage indicators are supplied with a battery charger and a specifically designed carrying case for unit and accessories.
Seaward KD1E Digital High Voltage Indicator & Detector Specifications:
Use as a potential indicator to determine presence of voltage or as a voltmeter
Robust display housing
No switches
Provides direct reading of voltage measurements
Low battery indicator
Supplied with battery charger
Specifically designed carrying case for unit and accessories
Seaward KD1E/15D 15kV Digital High Voltage Indicator & Detector
Seaward KD1E/15D digital high voltage detector is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 15kV.
Seaward KD1E/15D 15kV Digital High Voltage Indicator & Detector Features:
Maximum System Voltage: 15kV
KD1E/15D Resolution: 10V
Maximum Voltage to Earth: 8.6kV
Seaward KD1E/15D Part No - 109A910
Seaward KD1E/15D Digital High Voltage Indicator Dimensions: Length: 600mm Diameter: 25mm Handle Length: 235mm Hand Guard Height: 23.5mm
Seaward KD1E/33D 33kV Digital High Voltage Indicator & Detector
Seaward KD1E/33D digital high voltage detector is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 33kV.
Seaward KD1E/33D 33kV Digital High Voltage Indicator & Detector Features:
Maximum System Voltage: 33kV
KD1E/33D Resolution: 100V
Maximum Voltage to Earth: 19kV
Seaward KD1E/33D Part No - 109A911
Seaward KD1E/33D Digital High Voltage Indicator Dimensions: Length: 600mm Diameter: 25mm Handle Length: 235mm Hand Guard Height: 23.5mm
Seaward KD1E Digital High Voltage Indicator Accessories
Seaward PH3 Unit
Proving Unit for proof testing high voltage indicators
High Voltage output 1200V-1500DC
Self Test Facility
Avoids use of known supply points or bulky test equipment
Seaward Bent End Adaptors
90 degrees Standard, 120 degrees on request
Suitable for use on vertical typre switchgear
Seaward Extension Rod
1.5m extension rod for use on overhead lines
Suitable for use with KDIE/15D, KDIE/33D, PR15D & PR33D
Ultrasonic level
The Microflex LR MI transmitter with display and Microflex LR MS smart instrument are available with four acoustic frequencies to reliably track levels under extreme conditions. They have ATEX certification for hazardous areas and can operate from 9-24VDC with optional relays and low power modes. The Ranger 1000 and 3000 ultrasonic level transmitters have integral displays, IP67 ratings, and simple programming for measuring liquids and solids within specified ranges and resolutions.
Drager Flame 2300 - Fixed Flame Detector - Spec Sheet
The Dräger Flame 2300 is an explosion proof combined UV/IR flame detector that can detect hydrocarbon fires. It has a flexible design with multiple output and installation options. It is reliable in detecting fires with high immunity to false alarms by requiring both UV and IR sensors to detect a fire. It is approved for worldwide use under various certifications.
Htr india-products-automotive-noise-suppressor-resistor-hans-c-english.pdf
This document provides specifications for HANS-C series noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor models with values from 1K0 to 10K and their mechanical specifications including diameter, length, and minimum inductance of 15uH at 1MHz. Electrical specifications include tolerance of 20%, 10%, or 5% and a temperature range of -40C to 220C. Performance requirements ensure less than 2% resistance change under short term overload and less than 1% change after high voltage pulses typical of a spark plug. The resistors are designed to reduce radio frequency interference during electrical discharges in car and motorcycle engines.
Ac voltage-detector data sheet
The document describes an AC Voltage Detector with Relay that monitors the presence or absence of AC voltage between 50-250VAC. It connects to environmental monitoring systems using a 2-wire cable up to 1,000 feet long. The internal relay closes when voltage is detected above 60VAC and opens below 55VAC. It is available with either a NEMA 5-15 plug or IEC C14 socket and can interface with various electrical and sensor devices.
Growatt 30000 40000
The document provides specifications for Growatt solar inverters ranging from 30kW to 40kW. Key details include maximum efficiency of 98.2%, internal DC switch, compact design, multi MPP controller, Ethernet/WiFi connectivity, and comprehensive warranty programs. The inverters have transformerless design, IP65 rating, and operate from 180V to 1000V DC input voltage at up to 1000V maximum.
Drager Flame 1700 - Fixed Flame Detector - Spec Sheet
The Dräger Flame 1700 is an explosion proof UV flame detector that can detect hydrocarbon and non-hydrocarbon fires. It has a wide field of view, adjustable sensitivity and response time, and provides status updates via LED lights and outputs such as 4-20mA, relays, and optional RS485. It is approved for hazardous locations worldwide and has flexible installation and power supply options.
Drager Polytron IR CO2 Fixed Gas Detector - Spec Sheet
The Dräger Polytron IR CO2 is a gas detector that uses infrared technology to continuously monitor carbon dioxide levels. It has various features like fast and accurate response, adjustable measurement ranges from 2000 ppm to 30% by volume, and is suitable for use in explosive atmospheres. It comes in different versions, including standard, remote display, and hand-held terminal versions. It provides maximum safety and system availability when combined with a suitable controller.
System Sensor 2WTR-B Data Sheet
Buy the System Sensor 2WTR-B at JMAC Supply.
https://www.jmac.com/System_Sensor_2WTR_B_p/system-sensor-2wtr-b.htm?=slideshare
Process Signal Isolated Transmitters, 4-20 ma
4-20mA process current inputs are isolated and transmitted as 4-20mA output signals. Each channel operates independently
and is isolated from the others to prevent interaction between channels.
APMS-60-24
60W 24V Waterproof LED Power supplies for outdoor lighting fixtures, led strips, LED Floodlights, LED Projectors.
IP67 Waterproof level, full sealed with silicon gel. used for wet and damp conditions.
Riello aros-transformerless-solar-inverters
The document provides specifications for the Sirio EVO series of photovoltaic inverters from Aros Solar. The inverters feature innovative MPPT technology that maximizes power from photovoltaic panels in all conditions. They have no moving parts and up to 98% conversion efficiency. Protections include surge and overvoltage protection as well as ground fault detection. The inverters are designed for easy installation and monitoring, and meet European quality and safety standards.
CATU C Diag Touch Continuity Tester
The document summarizes the specifications of various continuity and insulation measurement devices:
- The CP-100C continuity tester measures resistance from 0-120 ohms with currents of 200mA or 20mA, and has programmable conformity thresholds of 1 or 2 ohms. It is IEC 61557-4 compliant.
- The CP-100B insulation measurement unit measures resistance from 10kohms to 999Mohms with configurable voltages from 50-1000VDC and a measuring current of at least 1mA. It has adjustable conformity thresholds and complies with IEC 61557-2.
- When used together, the CP-100C tester can display insulation readings on its screen while housed in
CATU CC-245-50 Voltage Detector (HV) 150kV
The document describes voltage detectors that are used for outdoor high voltage lines and switchgear equipment. The detectors have a precise and stable operating threshold to detect voltages without interference from induced voltages. They provide double signaling with bright flashing lights and an audible alarm that can be seen and heard from over 50 meters away. The detectors are robust and resistant to impacts, vibrations, extreme temperatures, and humidity. They are available in different models for various voltage ranges.
Stp17000 tl den130517w
The document describes the Sunny Tripower 10000TL/12000TL/15000TL/17000TL three-phase inverters for solar photovoltaic systems. The inverters have maximum efficiencies of 98.2%, support flexible plant designs with inputs up to 1000V and integrated grid management. They provide reliable protection with electronic string fuses, self-learning string failure detection and surge arresters. The inverters are suitable for commercial and industrial applications.
CATU CC-765-44/132 AC Voltage Detector
This document provides information about an IEC electronic voltage detector for outdoor use that detects voltages between 44 and 132kV. It has a bright red LED and audible signal to indicate the presence of voltage up to 20 meters away. It can be tested by pressing a test button which illuminates the red LED and sounds an alarm. A green LED then lights to confirm it is working properly. It has interchangeable hook-shaped contact electrodes and comes in a carrying case.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
I Range - Spec Guide
This document provides specifications and installation instructions for Hydropath's i Range industrial water conditioners. It summarizes the electrical and material specifications, safety certifications, environmental tolerances, and overload protection for the units. It also includes diagrams and instructions for installing ferrites, connecting to power and a BMS, and avoiding electrical loops during installation. Models range from 45i to 160i and condition water to combat limescale and biofouling in commercial and industrial applications.
Huawei Sun2000 Solar String Inverters 8-23kW
The document provides information on Huawei string inverters for solar photovoltaic systems ranging in power from 8-23 kW. It describes the key features and specifications of the SUN2000 series including high maximum efficiency of 98.6%, integrated surge protection, monitoring capabilities, communications options, and warranties of up to 25 years. Performance test results from Photon Magazine show maximum efficiencies of A+/A+ for the SUN2000-20KTL model.
Sunny tripower 5000 -12000
The document describes the Sunny Tripower series of three-phase string inverters for photovoltaic systems. The Sunny Tripower offers maximum efficiency of up to 98.3%, flexible design options, easy installation and use, and communicative features. It is suitable for residential and small commercial PV installations from 5 kW to 12 kW.
CATU CC-365 Standard Electronic Voltage Detector
The document describes a standard electronic voltage detector for indoor and outdoor use. It has extremely bright red flashing LEDs and a powerful audible signal to indicate voltage presence. When the test button is released, a timed green LED lights to indicate the detector is operational and self-testing continues. It has a precise operating threshold and high environmental resistance. Accessories include contact electrodes of different lengths and types as well as end fittings for attachment to sticks.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Public CyberSecurity Awareness Presentation 2024.pptx
Cyber security awareness slides for a busisness by TreeTop Security
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
More Related Content
What's hot
Drager Flame 1700 - Fixed Flame Detector - Spec Sheet
The Dräger Flame 1700 is an explosion proof UV flame detector that can detect hydrocarbon and non-hydrocarbon fires. It has a wide field of view, adjustable sensitivity and response time, and provides status updates via LED lights and outputs such as 4-20mA, relays, and optional RS485. It is approved for hazardous locations worldwide and has flexible installation and power supply options.
Drager Polytron IR CO2 Fixed Gas Detector - Spec Sheet
The Dräger Polytron IR CO2 is a gas detector that uses infrared technology to continuously monitor carbon dioxide levels. It has various features like fast and accurate response, adjustable measurement ranges from 2000 ppm to 30% by volume, and is suitable for use in explosive atmospheres. It comes in different versions, including standard, remote display, and hand-held terminal versions. It provides maximum safety and system availability when combined with a suitable controller.
System Sensor 2WTR-B Data Sheet
Buy the System Sensor 2WTR-B at JMAC Supply.
https://www.jmac.com/System_Sensor_2WTR_B_p/system-sensor-2wtr-b.htm?=slideshare
Process Signal Isolated Transmitters, 4-20 ma
4-20mA process current inputs are isolated and transmitted as 4-20mA output signals. Each channel operates independently
and is isolated from the others to prevent interaction between channels.
APMS-60-24
60W 24V Waterproof LED Power supplies for outdoor lighting fixtures, led strips, LED Floodlights, LED Projectors.
IP67 Waterproof level, full sealed with silicon gel. used for wet and damp conditions.
Riello aros-transformerless-solar-inverters
The document provides specifications for the Sirio EVO series of photovoltaic inverters from Aros Solar. The inverters feature innovative MPPT technology that maximizes power from photovoltaic panels in all conditions. They have no moving parts and up to 98% conversion efficiency. Protections include surge and overvoltage protection as well as ground fault detection. The inverters are designed for easy installation and monitoring, and meet European quality and safety standards.
CATU C Diag Touch Continuity Tester
The document summarizes the specifications of various continuity and insulation measurement devices:
- The CP-100C continuity tester measures resistance from 0-120 ohms with currents of 200mA or 20mA, and has programmable conformity thresholds of 1 or 2 ohms. It is IEC 61557-4 compliant.
- The CP-100B insulation measurement unit measures resistance from 10kohms to 999Mohms with configurable voltages from 50-1000VDC and a measuring current of at least 1mA. It has adjustable conformity thresholds and complies with IEC 61557-2.
- When used together, the CP-100C tester can display insulation readings on its screen while housed in
CATU CC-245-50 Voltage Detector (HV) 150kV
The document describes voltage detectors that are used for outdoor high voltage lines and switchgear equipment. The detectors have a precise and stable operating threshold to detect voltages without interference from induced voltages. They provide double signaling with bright flashing lights and an audible alarm that can be seen and heard from over 50 meters away. The detectors are robust and resistant to impacts, vibrations, extreme temperatures, and humidity. They are available in different models for various voltage ranges.
Stp17000 tl den130517w
The document describes the Sunny Tripower 10000TL/12000TL/15000TL/17000TL three-phase inverters for solar photovoltaic systems. The inverters have maximum efficiencies of 98.2%, support flexible plant designs with inputs up to 1000V and integrated grid management. They provide reliable protection with electronic string fuses, self-learning string failure detection and surge arresters. The inverters are suitable for commercial and industrial applications.
CATU CC-765-44/132 AC Voltage Detector
This document provides information about an IEC electronic voltage detector for outdoor use that detects voltages between 44 and 132kV. It has a bright red LED and audible signal to indicate the presence of voltage up to 20 meters away. It can be tested by pressing a test button which illuminates the red LED and sounds an alarm. A green LED then lights to confirm it is working properly. It has interchangeable hook-shaped contact electrodes and comes in a carrying case.
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
This document provides specifications for noise suppressor resistors used in automotive ignition systems. It lists resistor values from 1K0 to 10K with tolerances of 20%, 10%, and 5% and dimensions ranging from 11mm to 18mm long. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines in cars and motorcycles in order to comply with emissions regulations. They can withstand high temperatures from -40C to 220C and high voltage pulses typical of a vehicle's ignition system without significant changes to their resistance.
I Range - Spec Guide
This document provides specifications and installation instructions for Hydropath's i Range industrial water conditioners. It summarizes the electrical and material specifications, safety certifications, environmental tolerances, and overload protection for the units. It also includes diagrams and instructions for installing ferrites, connecting to power and a BMS, and avoiding electrical loops during installation. Models range from 45i to 160i and condition water to combat limescale and biofouling in commercial and industrial applications.
Huawei Sun2000 Solar String Inverters 8-23kW
The document provides information on Huawei string inverters for solar photovoltaic systems ranging in power from 8-23 kW. It describes the key features and specifications of the SUN2000 series including high maximum efficiency of 98.6%, integrated surge protection, monitoring capabilities, communications options, and warranties of up to 25 years. Performance test results from Photon Magazine show maximum efficiencies of A+/A+ for the SUN2000-20KTL model.
Sunny tripower 5000 -12000
The document describes the Sunny Tripower series of three-phase string inverters for photovoltaic systems. The Sunny Tripower offers maximum efficiency of up to 98.3%, flexible design options, easy installation and use, and communicative features. It is suitable for residential and small commercial PV installations from 5 kW to 12 kW.
CATU CC-365 Standard Electronic Voltage Detector
The document describes a standard electronic voltage detector for indoor and outdoor use. It has extremely bright red flashing LEDs and a powerful audible signal to indicate voltage presence. When the test button is released, a timed green LED lights to indicate the detector is operational and self-testing continues. It has a precise operating threshold and high environmental resistance. Accessories include contact electrodes of different lengths and types as well as end fittings for attachment to sticks.
What's hot (15)
Drager Flame 1700 - Fixed Flame Detector - Spec Sheet
Drager Flame 1700 - Fixed Flame Detector - Spec Sheet
Drager Polytron IR CO2 Fixed Gas Detector - Spec Sheet
Drager Polytron IR CO2 Fixed Gas Detector - Spec Sheet
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
Htr india-products-automotive-noise-suppressor-resistor-hans-s-english.pdf
Recently uploaded
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Public CyberSecurity Awareness Presentation 2024.pptx
Cyber security awareness slides for a busisness by TreeTop Security
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Recently uploaded (20)
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Public CyberSecurity Awareness Presentation 2024.pptx
Public CyberSecurity Awareness Presentation 2024.pptx
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
5.8 g hz external wireless rubber duck antenna 2d bi
- 1. Certificate No. 181228605 5.8 GHz External Wireless Rubber duck Antenna 2dBi Model No. (SRFSEW5800-2) Electrical Specification Frequency Range 5150-5850 MHz Gain 2 dBi VSWR < 1.5 Return Loss -15dB Impedance 50Ω Lightening Protection Direct Ground Maximum Input Power 100 W Polarization Vertical Radiation direction Omni Directional HPBW H:360°; V: 30°/40 ° Mechanical Specification Connector SMA (M) RP or Customized Dimension 13*392 mm Operating Temperature -40°C ~85°C Humidity 5~95% Environmental Friendly ROHS Compliant IP Rating IP65 Applications: •5.8GHz UNII applications •5.8GHz ISM applications •5.8GHz Wireless LAN systems •Wi-Fi •Wireless Video Systems