This document provides technical specifications for the Balboa GS510DZ 3-phase pool and spa control system. Key details include the system model number, software version, and component part numbers. Wiring diagrams and DIP switch settings are shown for two control configurations - one with a circulation pump and one with an additional circulation pump.
This document provides technical specifications for the Balboa Instruments GS520SZ spa control system. It includes the system model number, software version, and component part numbers. Wiring diagrams and DIP switch settings are provided for two different spa equipment setup configurations.
This document provides a tech sheet for the Balboa GS501DZ system. It includes information on the system model and software version, as well as the circuit board part numbers. It also describes the basic system features, wiring configurations, and DIP switch settings for two different setups.
This document provides a technical sheet for the Balboa GS523DZ pool and spa control system. It includes information about the system model and software version, basic features and functions, wiring configuration and DIP switch settings, and a system revision history. The technical sheet describes the components, inputs/outputs, heater requirements, and panel button assignments for the control system.
This document provides information on the GS501Z hot tub control system, including:
- The system model number and software version
- A list of included and optional control panels and components
- Wiring diagrams and explanations of dip switch settings
- Descriptions of features like heater wattage and temperature display options
- A revision history and basic troubleshooting tips
This document provides the technical specifications for the Balboa Instruments GS511Z pool/spa control system. It includes information about the system model number, software version, and component part numbers. The document also details the basic system features, wiring configuration and DIP switch settings, and a revision history.
This document is a tech sheet for the Balboa Instruments GS501Z system. It provides information on the system model, software version, and electrical panel options. The sheet also details the basic system features, wiring configuration, dip switch settings, and electrical service configuration options.
This document is a tech sheet for the Balboa Instruments system model GS5-GS511SZ-RCA-3.0. It provides information about the system components, software version, optional devices, basic features and functions, and a system revision history. The document also describes the power up display sequence and explains how persistent memory is used to store settings.
This document provides technical specifications for the Balboa Instruments GS520DZ spa control system. It includes information about the system model number, software version, and component part numbers. Wiring diagrams and dip switch settings are shown for two different spa equipment setup configurations. Persistent memory and how to reset it are also described.
This document provides technical specifications for the Balboa Instruments GS520SZ spa control system. It includes the system model number, software version, and component part numbers. Wiring diagrams and DIP switch settings are provided for two different spa equipment setup configurations.
This document provides a tech sheet for the Balboa GS501DZ system. It includes information on the system model and software version, as well as the circuit board part numbers. It also describes the basic system features, wiring configurations, and DIP switch settings for two different setups.
This document provides a technical sheet for the Balboa GS523DZ pool and spa control system. It includes information about the system model and software version, basic features and functions, wiring configuration and DIP switch settings, and a system revision history. The technical sheet describes the components, inputs/outputs, heater requirements, and panel button assignments for the control system.
This document provides information on the GS501Z hot tub control system, including:
- The system model number and software version
- A list of included and optional control panels and components
- Wiring diagrams and explanations of dip switch settings
- Descriptions of features like heater wattage and temperature display options
- A revision history and basic troubleshooting tips
This document provides the technical specifications for the Balboa Instruments GS511Z pool/spa control system. It includes information about the system model number, software version, and component part numbers. The document also details the basic system features, wiring configuration and DIP switch settings, and a revision history.
This document is a tech sheet for the Balboa Instruments GS501Z system. It provides information on the system model, software version, and electrical panel options. The sheet also details the basic system features, wiring configuration, dip switch settings, and electrical service configuration options.
This document is a tech sheet for the Balboa Instruments system model GS5-GS511SZ-RCA-3.0. It provides information about the system components, software version, optional devices, basic features and functions, and a system revision history. The document also describes the power up display sequence and explains how persistent memory is used to store settings.
This document provides technical specifications for the Balboa Instruments GS520DZ spa control system. It includes information about the system model number, software version, and component part numbers. Wiring diagrams and dip switch settings are shown for two different spa equipment setup configurations. Persistent memory and how to reset it are also described.
This document provides specifications and configuration details for the Balboa Instruments GS501Z pool and spa control system. Key components include the GS500Z main printed circuit board and optional display panels. The system supports various heater sizes and voltages, and can be configured for different pump, circulation, and electrical wiring setups using dip switches and jumpers. Revisions to the main circuit board and a history of software updates are also documented.
This document provides technical specifications for the Balboa Instruments GS520SZ pool and spa control system. It lists the system model number and software version, along with part numbers for components. System features include outputs for pumps, blowers, lights, and other devices. The document also describes power requirements and the startup display sequence when power is applied.
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
This document provides information on the GS514SZ spa control system, including:
- The model and software version numbers
- Details on the base PCBA, PCB, and panels used
- A history of software updates to the system
- An overview of the basic system features, functions, and optional devices
- Instructions for resetting persistent memory after changing DIP switch settings
- Notes on power requirements and system outputs
This document provides technical specifications for the Balboa Instruments GS500Z control system. It includes the system model number, software version, and optional equipment. The document also describes the system's basic features, functions, power requirements, outputs, and optional devices. It provides a diagram of the control system layout and connections.
This document provides information on Balboa Instruments system model GS5-GS504SZ-RCA-3.0, including:
- The system model number, software version, and equipment part numbers.
- A revision history showing a software update.
- Basic system features like power requirements, outputs, and optional devices.
- Wiring configuration and DIP switch settings for the system.
- Electrical service configuration options.
This document provides information on the GS504SZ control system, including:
- The system model number and software version
- A list of included components and their part numbers
- A history of software updates to the system
- Descriptions of basic system features and functions
- Wiring configuration and DIP switch settings for setup
- Electrical service configuration options
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
This document provides a tech sheet for the Balboa Instruments GS501SZ system. It includes information on the system model number, software version, and electrical pinout board (EPN). The document also provides details on system features, wiring configuration, dip switch settings, and electrical service options.
This document provides technical specifications for the GS513Z pool and spa control system. It includes information about the system model number, software version, and electrical power requirements. Wiring diagrams and instructions are provided for configuring the system outputs and optional devices. Dip switch settings and jumper definitions are defined to configure the system operation.
The document provides technical specifications for the Balboa Instruments GS500Z pool and spa control system. It includes the system model number, software version, and other component part numbers. The document also provides information on installation and configuration including wiring diagrams, dip switch settings, jumper settings and descriptions of basic system features and functions.
This document provides a technical specification sheet for a Balboa Instruments GS510SZ pool and spa control system. It includes details on the system model number, software version, and component part numbers. It also provides information on basic system features, wiring configuration and DIP switch settings, and diagrams of the control board and connector labels.
This document provides technical specifications for the Balboa Instruments GS510SZ pool and spa control system. It includes the system model number, software version, and other component part numbers. Wiring diagrams and dip switch settings are shown to configure the system for different functions.
This document provides technical specifications and configuration details for the Balboa Instruments GS501SZ pool and spa control system. It lists the system model number, software version, and electrical component part numbers. Wiring diagrams and DIP switch settings are provided for the standard configuration with options for alternative setups. Troubleshooting tips and specifications for optional equipment are also included.
This document provides specifications for the Balboa GS525Z spa control system. Key details include:
- The system model is a GS5-GS525Z-RCA-3.0K with software version 43.
- It requires a base PCBA and PCB as well as panels for different spa models.
- The basic system features include power requirements, outputs, and additional optional devices.
- Wiring configurations and DIP switch settings are outlined for setups 1 and 2, showing connections for heaters, pumps, blowers, and other devices.
This document provides information about the VS513Z hot tub system from Balboa Instruments including:
- The system model number, software version, and other identifying information.
- A list of components included in the system.
- Instructions for resetting persistent memory and an explanation of time retention.
- Wiring diagrams and explanations of dip switch and jumper settings.
- Information on optional devices and connections like the ozone generator.
This document provides information about the VS500Z hot tub control system from Balboa Instruments. It lists the system model and software version, compatible base panels and optional equipment. It also includes a basic overview of system features, functions, and power requirements. The revision history shows software updates over time.
This document provides a technical sheet for the Balboa Instruments GS520DZ system. It includes information on the system model and software version, as well as the base PCBA and PCB used. It also lists the basic system features and functions, wiring configuration and DIP switch settings for two setup options, and a revision history for the system software.
This document provides technical specifications for the Balboa Instruments GS501Z pool and spa control system. It includes the system model number, software version, and electrical part numbers. Wiring diagrams and dip switch settings are provided to configure the system for different components. Optional display panels, heaters, pumps and other accessories are also listed.
This document summarizes the technical specifications of the GS501Z control system from Balboa Instruments, including:
- The model number, software version, and other identifying information.
- The included base panels and optional panels that can be used.
- A system revision history and template used.
- Basic system features such as power requirements, outputs, and optional devices.
- Wiring configuration details including DIP switch settings.
- Electrical service configuration options.
This document provides information about a VS514SZ hot tub system including:
- The system model number and software version
- A list of parts included in the system
- An overview of basic system features like power requirements, outputs, and optional devices
- Details on resetting persistent memory to update DIP switch settings
This document provides a tech sheet for the VS504SZ system with software version 43. It includes information about the system model, base PCBA, panels, and features. The document also provides wiring diagrams and explanations of DIP switch settings and jumper configurations for the system.
This document provides specifications and configuration details for the Balboa Instruments GS501Z pool and spa control system. Key components include the GS500Z main printed circuit board and optional display panels. The system supports various heater sizes and voltages, and can be configured for different pump, circulation, and electrical wiring setups using dip switches and jumpers. Revisions to the main circuit board and a history of software updates are also documented.
This document provides technical specifications for the Balboa Instruments GS520SZ pool and spa control system. It lists the system model number and software version, along with part numbers for components. System features include outputs for pumps, blowers, lights, and other devices. The document also describes power requirements and the startup display sequence when power is applied.
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
This document provides information on the GS514SZ spa control system, including:
- The model and software version numbers
- Details on the base PCBA, PCB, and panels used
- A history of software updates to the system
- An overview of the basic system features, functions, and optional devices
- Instructions for resetting persistent memory after changing DIP switch settings
- Notes on power requirements and system outputs
This document provides technical specifications for the Balboa Instruments GS500Z control system. It includes the system model number, software version, and optional equipment. The document also describes the system's basic features, functions, power requirements, outputs, and optional devices. It provides a diagram of the control system layout and connections.
This document provides information on Balboa Instruments system model GS5-GS504SZ-RCA-3.0, including:
- The system model number, software version, and equipment part numbers.
- A revision history showing a software update.
- Basic system features like power requirements, outputs, and optional devices.
- Wiring configuration and DIP switch settings for the system.
- Electrical service configuration options.
This document provides information on the GS504SZ control system, including:
- The system model number and software version
- A list of included components and their part numbers
- A history of software updates to the system
- Descriptions of basic system features and functions
- Wiring configuration and DIP switch settings for setup
- Electrical service configuration options
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
This document provides a tech sheet for the Balboa Instruments GS501SZ system. It includes information on the system model number, software version, and electrical pinout board (EPN). The document also provides details on system features, wiring configuration, dip switch settings, and electrical service options.
This document provides technical specifications for the GS513Z pool and spa control system. It includes information about the system model number, software version, and electrical power requirements. Wiring diagrams and instructions are provided for configuring the system outputs and optional devices. Dip switch settings and jumper definitions are defined to configure the system operation.
The document provides technical specifications for the Balboa Instruments GS500Z pool and spa control system. It includes the system model number, software version, and other component part numbers. The document also provides information on installation and configuration including wiring diagrams, dip switch settings, jumper settings and descriptions of basic system features and functions.
This document provides a technical specification sheet for a Balboa Instruments GS510SZ pool and spa control system. It includes details on the system model number, software version, and component part numbers. It also provides information on basic system features, wiring configuration and DIP switch settings, and diagrams of the control board and connector labels.
This document provides technical specifications for the Balboa Instruments GS510SZ pool and spa control system. It includes the system model number, software version, and other component part numbers. Wiring diagrams and dip switch settings are shown to configure the system for different functions.
This document provides technical specifications and configuration details for the Balboa Instruments GS501SZ pool and spa control system. It lists the system model number, software version, and electrical component part numbers. Wiring diagrams and DIP switch settings are provided for the standard configuration with options for alternative setups. Troubleshooting tips and specifications for optional equipment are also included.
This document provides specifications for the Balboa GS525Z spa control system. Key details include:
- The system model is a GS5-GS525Z-RCA-3.0K with software version 43.
- It requires a base PCBA and PCB as well as panels for different spa models.
- The basic system features include power requirements, outputs, and additional optional devices.
- Wiring configurations and DIP switch settings are outlined for setups 1 and 2, showing connections for heaters, pumps, blowers, and other devices.
This document provides information about the VS513Z hot tub system from Balboa Instruments including:
- The system model number, software version, and other identifying information.
- A list of components included in the system.
- Instructions for resetting persistent memory and an explanation of time retention.
- Wiring diagrams and explanations of dip switch and jumper settings.
- Information on optional devices and connections like the ozone generator.
This document provides information about the VS500Z hot tub control system from Balboa Instruments. It lists the system model and software version, compatible base panels and optional equipment. It also includes a basic overview of system features, functions, and power requirements. The revision history shows software updates over time.
This document provides a technical sheet for the Balboa Instruments GS520DZ system. It includes information on the system model and software version, as well as the base PCBA and PCB used. It also lists the basic system features and functions, wiring configuration and DIP switch settings for two setup options, and a revision history for the system software.
This document provides technical specifications for the Balboa Instruments GS501Z pool and spa control system. It includes the system model number, software version, and electrical part numbers. Wiring diagrams and dip switch settings are provided to configure the system for different components. Optional display panels, heaters, pumps and other accessories are also listed.
This document summarizes the technical specifications of the GS501Z control system from Balboa Instruments, including:
- The model number, software version, and other identifying information.
- The included base panels and optional panels that can be used.
- A system revision history and template used.
- Basic system features such as power requirements, outputs, and optional devices.
- Wiring configuration details including DIP switch settings.
- Electrical service configuration options.
This document provides information about a VS514SZ hot tub system including:
- The system model number and software version
- A list of parts included in the system
- An overview of basic system features like power requirements, outputs, and optional devices
- Details on resetting persistent memory to update DIP switch settings
This document provides a tech sheet for the VS504SZ system with software version 43. It includes information about the system model, base PCBA, panels, and features. The document also provides wiring diagrams and explanations of DIP switch settings and jumper configurations for the system.
This document provides information about a VS511Z hot tub system from Balboa Instruments, including:
- The system model number, software version, and other identifying information.
- A list of compatible base and display panel parts.
- A revision history showing past software updates.
- An overview of basic system features like power requirements and outputs.
- A diagram labeling system components.
This document provides technical specifications for the Balboa Instruments VS510SZ spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure pumps, heating, and other functions. Guidelines are provided for resetting persistent memory and basic system operation.
This document provides technical specifications for the VS504SZ pool and spa control system. It includes information about the system model number, software version, and electrical pinouts. The document also details wiring configurations, dip switch settings, and connections for optional devices like ozone generators.
This document provides technical specifications and wiring information for the Balboa Instruments VS503SZ system. Key details include:
- The system model is a VSP-VS503SZ-DCAH with software version 43.
- It lists the main PCBA, PCB, and base panel part numbers.
- Wiring diagrams and descriptions are provided for the standard configuration including power requirements, outputs, optional devices, and dip switch settings.
- Instructions for resetting persistent memory and details on time of day retention are included.
- Guidelines are given for ozone connections and changing the voltage output.
This document provides technical specifications and information for the Balboa Instruments VS510SZ pool and spa control system. It includes the model number, software version, and other identifying information. wiring diagrams and instructions are provided showing how to configure dip switches and connect components like pumps, lights, and an ozone generator. Instructions are also given on resetting persistent memory when changing dip switch settings.
This document provides technical specifications for the Balboa Instruments VS510SZ pool and spa control system. It includes information about the system model and software version, compatible base panels and boards, a system revision history, basic features and functions, wiring configuration and DIP switch settings, and descriptions of auxiliary panel connections and ozone connections. The high-level purpose is to provide details needed for installation and operation of the VS510SZ pool and spa control system.
This document is a technical sheet for the VS500Z 120V GFCI spa system. It provides details on the system model number, software version, and component part numbers. It also lists the basic features and functions of the system, including power requirements, outputs, optional devices, and a diagram of the circuit board labels. The system revision history is given, showing changes made with different software updates.
This document provides technical specifications and wiring information for the VS500Z 120V GFCI spa control system from Balboa Instruments. Key details include:
- The system model number is VSP-VS500Z-FCAH and the software version is 43.
- It provides wiring diagrams and definitions for the DIP switches and jumpers that configure the system operation and components.
- Instructions are included for resetting persistent memory to allow new DIP switch settings to take effect and troubleshooting power up sequences.
This document provides technical specifications for the Balboa Instruments VS511SZ pool and spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure the system for different features and functions. Guidelines are provided for resetting persistent memory and setting the voltage output for ozone connections.
This document provides a tech sheet for the Balboa Instruments VS511SZ system. It lists the system model number and software version, as well as part numbers for components like the base PCBA, panels, and heater. It also provides a revision history, lists basic system features and functions, and describes the power up display sequence and how to reset persistent memory.
This document provides instructions for adjusting various settings on a spa control panel, including temperature unit (F or C), time of day, economy mode start time and duration, panel lock, and descriptions of default settings and modes like economy mode and freeze protection. Settings are adjusted using the program, list, enter and up/down arrow keys, and confirmed with enter. Error codes are displayed as flashing dots and require servicing.
The document provides instructions for operating various functions of a spa or hot tub. It describes the economy mode which maintains water temperature 20°F below the set point. It also describes the freeze protection mode which activates the pump and heater if water drops below certain temperatures. Default settings are described such as filtration cycles running for 1 hour every 24 hours with water at 95°F. Instructions are provided for operating pumps, blowers, lights and setting the temperature. Error codes and troubleshooting tips are also summarized.
This document provides installation and operation instructions for a PS-9704 series pool/spa control system. It includes guidelines for installing remote heaters, making electrical and wet connections, programming filtration settings, and troubleshooting. Safety precautions are outlined, and a wiring diagram and parts list are provided.
The document provides installation and operation instructions for a Platinum Series pool and spa control system. It includes details on installing remote heaters, electrical connections, temperature sensors, equipment connections, and programming filtration settings. Safety instructions are provided at the beginning regarding proper installation and use of the system.
The document provides installation instructions for PS-6502 & PS-6503 Platinum Series pool and spa control systems. It describes how to install the heater in different locations including on the bottom, back, or top of the control box using adjustable clamps or slide brackets. The instructions also cover electrical installation, temperature sensor placement, equipment connections, and programming filtration settings. Additional sections provide details on optional equipment, operational considerations, troubleshooting, and warranty information.
The document provides information on the default system operation, freeze protection modes, high temperature error handling, filtration cycles, pump and blower controls, light controls, temperature setting, and error identification for a spa or pool system. When power is applied, the system will initiate a default 24-hour filtration cycle at 95°F. It describes two modes of freeze protection below 59°F and 49°F and will suspend filtration if temperatures exceed 115°F or reach errors.
The document provides instructions for operating and programming a spa, including:
- If the water temperature exceeds 115°F, the heater will turn off, and above 122°F all outputs will disable until cooled.
- The filtration cycle can be programmed to run 1, 2, or 3 times daily for 60, 120, 180, or 480 minutes each cycle.
- By default, the spa will filter for 1 hour every 24 hours, maintaining the temperature at 95°F.
- Instructions are provided for operating the pump, accessory, light, and adjusting the temperature settings.
- The system enters a freeze protection mode if the temperature drops below 59°F by turning the pump on periodically.
The document provides instructions for operating and programming a spa control system. It describes how the system handles high temperatures, allows setting filter cycles for 1-3 times daily and durations of 60-180 minutes, and will default to a 24-hour filter cycle at 95°F if power is lost. It also explains how to operate the pump, light, and change the temperature setting, and describes freeze protection and error identification features.
This document summarizes the revision history of PCB part number 33-0024-Rx from the initial R0 revision in January 1999 through the current R6 revision. It describes the changes made at each revision level such as PCB layout changes, software changes, additions of memory and removal of features. It also provides information to help identify the correct wiring diagram for a given revision level.
This document provides instructions for an Eco 1 timed filtration system. It states to press and hold the light button to change the duration of filtration, and to press and hold the pump button to change the number of times filtration will occur. It also provides contact information for My Pool and Spas, a wholesale pool and spa parts supplier.
The document provides instructions for setting various operating parameters of a pool or spa control system including time, filtration start/duration, temperature display units, panel lock, economy mode, freeze protection, and error conditions. It describes pressing the program key to access each setting and using up/down arrows to adjust before pressing program to save. It also lists default settings if power is lost.
The changes include:
- Two programmable filtration cycles, one for AM and one for PM.
- A new "Smart Summer Mode" that operates pumps and chlorinators during cooler times when temperatures exceed a threshold.
- Optional programming via Palm Pilot or keypad.
- New auxiliary circuit and circulation pump options.
- Updated owner's manuals to reflect changes.
This document provides contact information for a wholesale pool and spa parts business called MyPoolSpas.com. It lists their phone number as 920-925-3094. The business sells wholesale pool and spa parts.
This document provides contact information for a company called MyPoolSpas.com Spa Parts Wholesale Pool. They sell pool and spa parts and can be reached by calling 920-925-3094. The document lists the name of the company and their phone number.
The document provides instructions for programming various settings on an HT-2 / 9600 Series spa control system, including time of day, filtration cycle start time and duration, economy mode start time and duration, temperature units (Fahrenheit or Celsius), and a spa-side lock feature. It also describes low level programming options that can be changed by positioning jumpers on the system board, including pump, blower, light, ozone, fiber optics, clock, current, circulation pump, and sensor calibration settings.
The document discusses four jumpers on a system board that can be positioned to change parameters of an equipment system. Jumper 1 sets either a high or low current limit. Jumper 2 selects whether temperature is displayed in Fahrenheit or Celsius. Jumpers 3 and 4 determine if the pumps run as single or two speed pumps. Positioning the jumpers allows customizing the system's operation based on electrical specifications and pump configuration.
This document provides instructions for operating an infrared remote control for a pool or spa. It includes:
1. A key chart explaining the functions of each button on the remote control.
2. Instructions for programming the remote to control up to three home entertainment or automation devices by entering their unique four-digit codes.
3. Procedures for replacing batteries, searching for codes if a device is not responding, checking stored codes, and putting the remote into learning mode to add new functions from an original remote control.
The document provides instructions for programming a Palm Pilot PDA to communicate with and adjust the low-level programming of Hydro-Quip control systems. The PDA must have the Serve-Soft 2 software installed and unlocked using the username "Hydro-Quip" and password "Hq92u1". An ADIR-1 cartridge is used to connect the PDA to the control system. Low-level parameters can then be viewed and modified on the PDA screen by tapping selections. Additional features like current states, troubleshooting, and documentation can also be accessed.
1. GS510DZ 3PHASE Tech Sheet
Balboa
System PN 55415-01
System Model # GS5-GS510DZ-RCA-3.0
Software Version # 43
EPN # 2808
Base PCBA - PN 55416-01
PCB GS500Z - PN 22015 Rev B
Base Panels
VL801D (Serial Deluxe) – PN 54108
VL802D – PN 54528
Template used: 40599_97_O.pdf 11/08/2008
55415-01_97_B.pdf 01/30/2009
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 1 920-925-3094
55415-01_97_B
2. System Revision History
System PN EPN Date Requested By Changes Made
55415-01 2808 01.30.2009 Balboa Update software to version 43.
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 2 920-925-3094
55415-01_97_B
3. Basic System Features and Functions
Power Requirements
Requires PCB Rev B.
System Outputs
Setup 1 (As Manufactured) Setup 2
(Stereo)
(Stereo)
Additional Options J71
J2A J1A
J1
J2
1
J18
J10
U4
J19
J12
J60 J7 J8 J44
1 1 1 1 1
J22
1
EXT RLY AUX F SEN A SEN B VAC J11
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 3 920-925-3094
55415-01_97_B
5. Wiring Configuration and DIP Settings
Setup 1 (As Manufactured) HIPot Testing Note:
Disconnect slip terminal with green
wires from J90 prior to performing
HiPot test. Failure to disconnect may
cause a false failure of the test.
(Stereo) Reconnect terminal to J90 after
successful completion of HiPot test.
AV F7 F1 J13
J50 J29 J23 K6 K1 F10A 250V
OZONE PUMP 1 K9
F3A 250V
J52 J51 F6, T30A 480V
J
Audio Visual
G N
J46
Blower
2-Spd P1
1-Spd P1
Ozone
J47
CIRC. PUMP
K8
K5 J20
N
J25
5 G N N C9 Spa
N
G N
J32
2 Light
G
G
G
F3
TB1 10VAC
10VAC
J17/26 J72
1 F4, T0.2A 250V OPT. BLWR/PUMP 2 J71
T1
J58
J2A J1A
2 J1
W2
J28
8
J2
3
J26
6
K3
1
J18
4 J43 J10
K4
U4
J57
F2
Balboa
J19
HTR2 J101 HTR1 00 K2 S1
W1 J90 J12
BALBOA INSTRUMENTS, IN J60 J7 J8 J44
J6
GS51xZ mode
E.GND
GS500Z 1 1 1 1 1
COPYRIGHT 2007
J22
MADE IN U.S.A. TST 1
P/N 22015_B SWITCHBANK A EXT RLY AUX F SEN A SEN B VAC J11
Heater rated @ 240V 3.0kW
J11 must be Jumpered
3.0 kW
X-P231 CE
PN 55025 J7
J1
1-Spd P2
R
P/N 22909 REV B
W1
B
J6
W G
F30A 480V
WARNING: Main Power to system should be turned OFF BEFORE adjusting DIP switches.
WARNING: Persistent Memory (J43) must be RESET to allow new DIP switch settings to take effect. (See Persistent Memory page)
GS500/501/510DZ
SSID # Software
Wiring Color Key
J11 J12 3
Neutral (Common) AC Connections
100 3.0kW Special AC Connections
99 Heater 2 Line AC Connections
43 10 Volt Connections
A1, Test Mode OFF A6, 50 Hz 1
Relay Control Wires
A2, See Table 1 A7, J17/26 Disabled
Enabled
A3, Exp Pump Disabled
Enabled J43
A8, Degrees C Memory Board Connector Key
A9, Non-Circ Mode Reset
A5, 2-speed P1 A10, See Table 1
1 Typically Line voltage
2 Typically Line voltage for 2-speed pumps
Panel Button Assignments Panel Button Positions
3 Neutral (Common)
1=Time 5=Light
1 3 8 5 4
2=Mode/Prog 6=Pump 1 Ground
3=Temp Up 7=Unused Pump
7=Expander 2 4 6 7
Note flat sides in connector
4=Temp Down 8=Unused
8=J17/26
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 5 920-925-3094
55415-01_97_B
6. Wiring Configuration and DIP Settings
Setup 2 HIPot Testing Note:
Disconnect slip terminal with green
(Stereo) wires from J90 prior to performing
HiPot test. Failure to disconnect may
cause a false failure of the test.
Reconnect terminal to J90 after
successful completion of HiPot test.
AV F7 F1 J13
J50 J29 J23 K6 K1 F10A 250V
OZONE PUMP 1 K9
F3A 250V
J52 J51 F6, T30A 480V
J
Audio Visual
G N
J46
Blower
2-Spd P1
1-Spd P1
Ozone
J47
CIRC. PUMP
K8
K5 J20
Circ Pump
N
J25
5 G N N C9 Spa
N
G N
J32
2 Light
G
G
G
F3
TB1 10VAC
10VAC
J17/26 J72
1 F4, T0.2A 250V OPT. BLWR/PUMP 2 J71
T1
J58
J2A J1A
2 J1
W2
J28
8
J2
3
J26
6
K3
1
J18
4 J43 J10
K4
U4
J57
F2
Balboa
J19
HTR2 J101 HTR1 00 K2 S1
W1 J90 J12
BALBOA INSTRUMENTS, IN J60 J7 J8 J44
J6
GS51xZ mode
E.GND
GS500Z 1 1 1 1 1
COPYRIGHT 2007
J22
MADE IN U.S.A. TST 1
P/N 22015_B SWITCHBANK A EXT RLY AUX F SEN A SEN B VAC J11
Heater rated @ 240V 3.0kW
J11 must be Jumpered
3.0 kW
X-P231 CE
PN 55025 J7
J1
1-Spd P2
R
P/N 22909 REV B
W1
B
J6
W G
F30A 480V
WARNING: Main Power to system should be turned OFF BEFORE adjusting DIP switches.
WARNING: Persistent Memory (J43) must be RESET to allow new DIP switch settings to take effect. (See Persistent Memory page)
GS500/501/510DZ
SSID # Software
Wiring Color Key
J11 J12 3
Neutral (Common) AC Connections
100 3.0kW Special AC Connections
99 Heater 2 Line AC Connections
43 10 Volt Connections
A1, Test Mode OFF A6, 50 Hz 1
Relay Control Wires
A2, See Table 1 A7, J17/26 Disabled
Enabled
A3, Exp Pump Disabled
Enabled J43
A8, Degrees C Memory Board Connector Key
A9, Non-Circ3ºF Circ Pump
A9, 24 Hour Mode Reset
A5, 2-speed P1 A10, See Table 1
1 Typically Line voltage
2 Typically Line voltage for 2-speed pumps
Panel Button Assignments Panel Button Positions
3 Neutral (Common)
1=Time 5=Light
1 3 8 5 4
2=Mode/Prog 6=Pump 1 Ground
3=Temp Up 7=Unused Pump
7=Expander 2 4 6 7
Note flat sides in connector
4=Temp Down 8=Unused
8=J17/26
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 6 920-925-3094
55415-01_97_B
7. DIP Switches and Jumpers Definitions
SSID 100 99 43 Base Model GS500DZ-GS501DZ-GS510DZ
DIP Switch Key
A1 Test Mode (normally OFF)
A2+A10 Control amp draw requirements (See Table 1) Table 1 # of Hi-Speed
A3 “ON” position: Expander Board Enabled for 1-speed Pump only. Pumps/Blower
“OFF” position: Expander Board Disabled. Before Heat Disabled
A4 Aux Freeze (must be OFF) A2 A10
A5+A9 Pump 1 speeds and Circ Modes: OFF OFF 0
A5 A9 Circ Mode Pump 1 Speed ON OFF 1
OFF OFF Non-circ 2-speed OFF ON 2
ON OFF Circ "acts like Pump 1 low" (filters/polls/ect) 1-speed ON ON 3
OFF ON 24 hours with 3°F shut-off 1-speed
ON ON 24 hours with 3°F shut-off 2-speed
A6 “ON” position: 50Hz operation
“OFF” position: 60Hz operation
A7 “ON” position: J17/26 Enabled for Blower or 1-speed Pump.
“OFF” position: J17/26 Disabled
A8 “ON” position: temperature is displayed in degrees Celsius
“OFF” position: temperature is displayed in degrees Fahrenheit
Jumper Key
J11 If using 3kW or higher wattage heater, jumper can be set in either position, but may perform better on Pins 1 and 2.
If using 2.5kW or lower wattage heater, jumper must be set on 1 Pin only.
J12 Factory set. DO NOT MOVE.
Jumper must be on Pins 1 and 2 for GS51xZ/GS52xZ/GS5xxSZ/GS5xxDZ software.
Jumper must be on Pins 2 and 3 for GS50xZ software.
J43 When jumper is placed on 2 pins during power-up, system will reset persistent memory.
Leave on 1 pin only to enable persistent memory feature.
WARNING:
Setting DIP switches incorrectly may cause abnormal system behavior and/or damage to system components.
Refer to Switchbank illustration on Wiring Configuration page for correct settings for this system.
Contact Balboa if you require additional configuration pages added to this tech sheet.
Panel Button Positions Aux Panel Information
1 3 8 5
Supports 2-button aux panel
2 4 6 7 VX20 6 7
Supports 4-button aux panel
Panel Button Assignments VX40D 6 7 8 5
1=Time 5=Light
2=Mode/Prog 6=Pump 1
3=Temp Up 7=Expander Pump (when A3 is ON)
4=Temp Down 8=J17/26 (when A7 is ON)
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 7 920-925-3094
55415-01_97_B
8. Electrical Service Configuration Options
Systems with PCB Rev B Only J50
AV
J29
OZONE
J23
PUMP 1 K9
K6 K1
F7
F10A 250V
F1 J13
J52 J51 F6, T30A 480V
J F3A 250V
G N
J46
Single Service, TN and TT Electrical Systems
J47
CIRC. PUMP
K8
K5 J20
N
J25
5 G N C9
N
N
J32
2 (1 x 16 Amp or 1 x 32 Amp) G N
G
G
G
F3
TB1 10VAC
3 Wires (1 Line + 1 Neutral + 1J71Protective Earth)
10VAC
J17/26 J72
1 F4, T0.2A 250V OPT. BLWR/PUMP 2
T1
J58
Protective Earth wire (Green/Yellow) must be connected
to system ground terminal as marked.
J2A J1A
AS MANUFACTURED
2 J1
W2
J28
8 This option is configured and shipped as the default.
J2
L1 3
J26
6
K3
All equipment (pumps, blower, and heater) runs on
N1 service line L1. J18
1
4 J43 J10
K4
U4
J57
F2
Balboa
J19
BALBOA INSTRUMENTS, INC.
W1
HTR2 J101 HTR1 00 K2
J90 Systems using only 1 DIP switch (A10) for heat disable:
S1
J6
J60 J7 J8 J44
J12
E.GND
1 1
GS500Z
COPYRIGHT 2007 Pb
Pb
For 1 x 16 Amp Service: 1 1 1
J22
MADE IN U.S.A. TST 1
P/N 22015_B SWITCHBANK A EXT RLY AUX F SEN A SEN B VAC J11
DIP Switch A10 must be ON.
For 1 x 32 Amp Service:
Set DIP Switch A10 such that total system amperage
draw never exceeds rated service input.
Systems using multiple DIP switches for heat disable:
Refer to system Hot Sheet DIP Switch Definition page
and set the switches shown in Table 1 such that total
system amperage draw never exceeds rated service input.
AV F7 F1 J13
J50 J29 J23 K6 K1 F10A 250V
OZONE PUMP 1 K9
J52 J51 F6, T30A 480V
J F3A 250V
G N
J46
Dual Service, TN and TT Electrical Systems
J47
CIRC. PUMP
K8
K5 J20
N
J25
5 G N C9
(2 x 16 Amp)
N
N
G N
J32
2
G
G
G
F3
TB1
1 F4, T0.2A 250V
5 Wires (2 Lines10VAC 2 Neutrals + 1 Protective Earth)
J17/26 +
J72
OPT. BLWR/PUMP 2
J71
10VAC
L2 T1
Protective Earth wire (Green/Yellow) must be connected
J58
to system ground terminal as marked.
J2A J1A
N2 2 J1
W2
J28
8 The heater runs on service line L1, while all other
J2
OPTIONAL
L1 3
equipment, such as pumps and blowers, run on
J26
6
K3
service line L2.
N1 J18
1
4 J43 J10
K4
J57 Completely remove the white wire from J26 and J32.
F2
U4
Balboa
J19
BALBOA INSTRUMENTS, INC.
W1
HTR2 J101 HTR1 00 K2
J90 Note: J32 and J25 are electrically identical. The white
S1
J6
J60 J7 J8 J44
J12
E.GND
1 1
GS500Z
COPYRIGHT 2007 Pb
Pb
wire may be attached to either terminal before removal. 1 1 1
J22
MADE IN U.S.A. TST 1
P/N 22015_B SWITCHBANK A EXT RLY AUX F SEN A SEN B VAC J11
Systems using only 1 DIP switch (A10) for heat disable:
DIP Switch A10 must be OFF.
Systems using multiple DIP switches for heat disable:
Refer to system Hot Sheet DIP Switch Definition page
and set both switches shown in Table 1 to ON positions.
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts
Page 8 920-925-3094
55415-01_97_B