Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold bushings (oil insulated) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series
Euromold 400LB Elbow Connectors & 400TB 440TB Elbow Connectors
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
LEY EXPERIMENTAL DE COULOMB
INTENSIDAD DE CAMPO ELÉCTRICO
CAMPO DEBIDO A UNA DISTRIBUCIÓN CONTINUA DE CARGA VOLUMÉTRICA
CAMPO DE UNA LÍNEA DE CARGA
CAMPO DE UNA LÁMINA DE CARGA
LÍNEAS DE FLUJO Y ESQUEMAS DE CAMPOS
LEY EXPERIMENTAL DE COULOMB
INTENSIDAD DE CAMPO ELÉCTRICO
CAMPO DEBIDO A UNA DISTRIBUCIÓN CONTINUA DE CARGA VOLUMÉTRICA
CAMPO DE UNA LÍNEA DE CARGA
CAMPO DE UNA LÁMINA DE CARGA
LÍNEAS DE FLUJO Y ESQUEMAS DE CAMPOS
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/11-X
12.0-17.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/25-X
26.5-32.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/22-X
23.5-31.0mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/19-X
20.0-26.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/15-X
16.0-22mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Euromold 400LR
Interface B
Elbow Connectors 11kV 24kV 33kV
Euromold 400LR/G/27-X
28.5-37.5mm Dia Over Core Insulation (mm)
Euromold Ordering Instruction
Select the Nexans Euromold connector part number which provides the best centring to the cable core insulation diameter and substitute X according to the cable conductor size (sqmm) and type (copper or aluminium). Add "K" for 24kV connectors and add "M" for 33kV connectors. Nexans Euromold connectors can be installed using either DIN hexagonal or Deep Indent crimping.
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
400 Series Interface C Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded,high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 400 series separable connectors include Euromold elbow connectors, Euromold tee connectors, Euromold bushings (oil insulated) and Euromold surge arresters to protect electrical equipment up to 33kV.
Nexans Euromold Separable Elbow Connectors 400 Series, 400TB 440TB Features :
Connector for terminating high voltage polymeric (XLPE EPR) cables, 11-33kV
Plug in bolted tee connectors with current rating 630amps and 1250amps
Conductive EPDM jacket provides a touch safe screened termination
Suits copper wire and copper tape screened cable, 35-300sqmm
Type C 630A interface to CENELEC EN50180
T&D UK with the support of Nexans provide installation training and certification for experienced high voltage cable jointers up to 33kV.
Euromold Connectors 400 Series Interface Type B Bushing
* Connector Type : 14mm Plug-In Pin Contact
* Voltage Range : 11/12kV-33/36kV
* Current Rating : 400amps
* Specification : CENELEC EN50180 & EN50181
Euromold 400LR Elbow Connectors are used with 400 Series Interface B Bushing.
Nexans Euromold 400 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV, 24kV and 33kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type B (400amp) bushings with 14mm plug-in pins, up to 33kV.
Nexans Euromold 400 series separable connectors include Nexans Euromold elbow connectors, Nexans Euromold tee connectors, Nexans Euromold straight plug connectors, Nexans Euromold bushings (air, oil and gas insulated switchgear) and Nexans Euromold surge arresters to protect electrical equipment up to 33kV.
Euromold Connectors 400 Series Interface Type C Bushing - 630Amp
* Connector Type : M16 Bolted Copper Insert
* Voltage Range : 11/12kV-33/36kV
* Current Rating : 630amps
* Specification : CENELEC EN50180 & EN50181
Euromold 430TB Elbow Connectors are used with 400 Series Interface C Bushing.
Nexans Euromold tee connectors are designed for terminating high voltage XLPE power cables into compact switchgear to make optimum use of limited installation space.
Nexans, the worldwide leader in the cable industry, has extended its well-proven range of compact high voltage (HV) connectors with two new tee-shaped connectors designed specifically for use with compact switchgear and transformers now being specified for wind turbine applications. The Nexans Euromold M430TB connector is for use with higher voltages (up to 33-36kV) and the M434TB connector is for higher currents (up to 1,250 A).
Trend Towards Compact Switchgear for Wind Turbines
The growing trend towards using ever more compact high voltage switchgear in wind turbines has resulted in smaller cable boxes, limiting the space available for connectors. Nexans has responded to this challenge by developing its new asymmetric tee-shape connectors to create a compact connection solution. This now enables two cables to be connected in the same space required for one cable using a traditional non-compact connector. As well as being ideal for all applications where space is a limiting factor, the Nexans compact connectors also enable users to increase the capacity of an existing installation.
EPDM Jacket: A Key Design Feature for Safety and Reliability
The Nexans Euromold M430TB and the M434TB are separable tee-shape bolted connectors designed to connect high voltage polymer-insulated cable to wind turbine equipment such as switchgear and transformers- they can also be used for cable to cable connections with the appropriate mating parts. A key design feature is the thick (3 mm) EPDM (Ethylene Propylene Diene Monomer) rubber conductive insulation jacket that provides a total safe to touch screen for personnel safety, this is both more reliable and longer lasting than the painted silicone rubber insulation used in many connectors.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
Similar to Nexans Euromold 400TB 630A 11kV Bolted Tee Connectors 35-300sqmm - Nexans Euromold Separable Connectors Interface C 400 Series (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
How world-class product teams are winning in the AI era by CEO and Founder, P...
Nexans Euromold 400TB 630A 11kV Bolted Tee Connectors 35-300sqmm - Nexans Euromold Separable Connectors Interface C 400 Series
1. CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582
400TB
INTERFACE C
TEE CONNECTOR
Application
Separable tee shape
connector (bolted type)
designed to connect polymeric
insulated cable to equipment
(transformers, switch gear,
motors, ...).
Also connects cable to cable
when using the appropriate
mating parts.
Up to 41.5 kV - 630 A
Technical characteristics
• The thick conductive EPDM
jacket provides a total safe to
touch screen which ensures
safety for personnel.
• Each separable connector is
tested for AC withstand and
partial discharge prior to
leaving the factory.
6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
19/33 (36) kV
20.8/36 (41.5) kV
Design
Separable connector
comprising:
1. Conductive EPDM insert.
2. Conductive EPDM jacket.
3. Insulating EPDM layer.
4. Type C - 630 A interface
as described by CENELEC
EN 50180 and 50181.
5. Conductor connector.
6. Basic insulating plug (with
VD point).
7. Cable reducer.
8. Conductive rubber cap.
9. Clamping screw.
10. Earthing lead.
255 mm
220 mm
4
9
5
6
8
1
390 mm
2
3
The screen break design
enables cable outer sheath
testing without removing or
dismantling the connector.
10
Specifications and
standards
7
The separable connector 400TB
meets the requirements of
CENELEC HD 629.1 S1.
Separable
connector
type
Voltage
Um
(kV)
Current
Ir
(A)
min.
max.
400TB/G
K400TB/G
M400TB/G
P400TB/G
12
24
36
41.5
630
630
630
630
35
35
35
35
300
300
240
240
Conductor size (mm 2)
8
2. Kit contents
The complete (K)(M)(P)400TB/G
tee connector kit comprises the
following components:
+
Connector housing
(K)(M)(P)400BT/G
The kit also comprises lubricant, wipers,
installation instructions and crimp chart.
+
Clamping
screw
400TCS
Ordering instructions
To order the tee connector,
select the ordering part number
which gives you the best
centring of your core insulation diameter and substitute X
using table X, according to your
conductor size and type.
Add a 'K' for use up to 24 kV,
an 'M' for use up to 36 kV or
add a 'P' for use up to
41.5 kV.
+
Conductor
contact
TBC-X
Basic insulating
plug +
rubber cap
(K)(M)(P)400BIPA
For use with
copper tape
screened cables.
Order: Kit MT.
For use with Alupe or
C 33-226 cables.
Please contact our
representative.
=
(K)(M)(P)400TB/G-W-X
connector kit
Cable reducer
411CA-W
Table W
Dia. over core insulation (mm)
Ordering
part number
min.
max.
12.0
16.0
20.0
23.5
26.5
28.5
400TB/G-11-X
400TB/G-15-X
400TB/G-19-X
400TB/G-22-X
400TB/G-25-X
400TB/G-27-X
17.5
22.0
26.5
31.0
32.5
37.5
Table X
Conductor size
(mm 2)
Example:
The copper wire screened cable
is 36 kV, 150 mm2 stranded
copper with a diameter over
core insulation of 32.5 mm.
Order a M400TB/G-27150(K)M-11-2 tee connector kit.
+
35
50
70
95
120
150
185
240
300
For use in potentially
explosive atmospheres
(for 12 kV max.).
Order: -/ATEX.
Aluminium conductor
Copper conductor
DIN
hexagonal
Deep
indent
DIN
hexagonal
35(K)M-12-2
50(K)M-12-2
70(K)M-12-2
95(K)M-12-2
120(K)M-12-2
150(K)M-12-2
185(K)M-12-2
240(K)M-12-2
300(K)M-12-2
35KM-12-1
50KM-12-1
70KM-12-1
95KM-12-1
120KM-12-1
150KM-12-1
185KM-12-1
240KM-12-1
300KM-12-1
35(K)M-11-2
50(K)M-11-2
70(K)M-11-2
95(K)M-11-2
120(K)M-11-2
150(K)M-11-2
185(K)M-11-2
240(K)M-11-2
300(K)M-11-2
For use with
other cable types.
Please contact our
representative.
For outdoor
applications.
Order: +MWS.
Components can be
ordered individually.
9