The document describes rectangular access doors for air duct systems. It provides details on the construction of the IDE access door model, including a seamless mounting frame, double-walled insulated door, neoprene sealant, and safety chain. It also lists specifications for four standard size models of the access door and notes they are suitable for low, medium, and high air pressure systems. Installation instructions involve sticking a stencil, cutting the duct, fastening the frame, and sealing.

1. 6.1 ACCESS DOORS rectangular/oval
6.1
ACCESS DOORS
Rectangular access door for rectangular and
oval air duct systems
6.1.15 ACCESS DOOR IDE
- Seamless, single-piece mounting frame with pre-embossed
inner flange for easy assembling
- 21 mm thick fire retardant double-walled door with
thermal and acoustic insulation
- Rotating and highly compressible neoprene sealant
(In case of fire the sealant is self-extinguishing)
- Safety chain for the lid
- Suitable for low, medium and high pressure pipes
(Independent tests and certification as per BSRIA)
Art.-Nr.* Designation Material Nominal doors A B C D E F VPE Weight
dimensions units kg/unit
665 IDE 1 Galv. steel 233 x 143 205 115 237 147 281 191 1 0,830
666 IDE 2 Galv. steel 362 x 227 330 195 367 232 414 279 1 1,600
667 IDE 3 Galv. steel 494 x 354 460 320 500 360 552 412 1 2,950
668 IDE 4 Galv. steel 647 x 496 610 462 653 502 705 550 1 5,720
* Can be supplied as special model with hinge
Workmanship + Assembling:
- Stick self-adhesive stencil onto the duct wall.
- Make incision in the wall as per the stencil.
- Use rivet to fasten the mounting frames
- Seal the frames using sealing compound MEZ-PLAST
All Rights Reserved