2of 4 ue

•

0 likes•26 views

BIOMETRY

This report describes the best designing of a 200cc FARM CART MACHINE which will be useful to the farm fields due to the fact that, the purchase, repair and maintenance are affordable to all level of income earners. Despite the cost effectiveness of the machine, the report also tries to justify that the machine can be used multipurposely as it serves the purposes of been used as farm transport, mowering machine, boom spraying and or mini planter with two rows. All these can be achieved as long as the implements are attached with respect to the power capacity of the farm cart. The report tells only the design and testing of machine excluding its farm implements design. Some best reviews from other study projects done by other people in the world provided a good reference for designing and implementation of this project. The project is initially costly because it needs to develop a prototype and test the different first ideas. The project report describes the important of choosing to use the designed farm cart machine compared to other farm machines at the market which are most efficiently to be used by farmers in their fields. The challenges are inevitable in any project, here in designing of this 200cc farm machine, the major issue is the funding because the fund for this project is from the pocket which is always insufficient as it depends to the meals and accommodation money distribution sponsored from the HIGH EDUCATION STUDENTS LOAN BOARD (HESLB) thus it takes longer to accomplish the project by waiting another quarter of the semester to continue with the project which affects the other part of normal life(in terms of meals and accommodation). The report recommends that, the department of engineering sciences and technology and Sokoine University of Agriculture as a whole should invest into this technology by utilizing fully the idea and funding the project for more better improvement so as to attain the desired standard that can with stand the different farm field factors. These when taken into consideration there is a possibility to achieve the industrialization policy in our country and thereafter it is a better approach to modern agriculture.

IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...

musadoto

This document contains sample exam questions for a course on irrigation systems design. It includes multiple choice and short answer questions testing understanding of key irrigation concepts. Some example questions are on pump characteristics, calculating water requirements for drip and sprinkler systems, estimating consumptive water use, and determining system efficiencies. The document provides a compilation of past exam questions from 1997 to 2018 to help students prepare for tests.

CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...

musadoto

Assignment thermal 2018 . ...

musadoto

BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018

musadoto

Self- Check 1 Which of the following are Pascal reserved words, standard identifiers, valid identifiers, invalid identifiers? end ReadLn Bill program Sues‟s Rate Start begin const Y=Z Prog#2 &Up First Name „MaxScores‟ A*B CostaMesa,CA Barnes&Noble CONST XYZ123 ThisIsALongOne 123XYZANSWER ANSWERS Paschal reserved words: begin, end, program, Start, CONST, const Standard identifiers: ReadLn, „MaxScores‟, Bill, Rate Valid identifiers: XYZ123, ThisIsALongOne, A*B, Y=Z, CostaMesa, CA, First Name Invalid identifiers: 123XYZ, Sues‟s, &UpFirstName, Barnes&Noble, Prog#2 Self- Check 2 Which of the following literal values are legal and what are their types? Which are illegal and why? 15 „XYZ‟ „*‟ $25.123 15; -999 .123 „x‟ “X” „9‟ „-5‟ True ANSWER: The following values are legal and their type Legal Type Illegal 15 Integer literal $25.123 „XYZ‟ String Literal .123 „X‟ Character Literal „9‟ True Boolean Literal 15; -999 Integer Literal -„5‟ Operator literal „*‟ TP- Lecture 4.2 Self- Checked 1 Which of the following are valid program headings? Which are invalid and why? (i) Program program; - INVALID using reserved ID (ii) program 2ndCourseInCS; -INVALID because starts with digit (iii) program PascalIsFun;- VALID program heading (iv) program Rainy Day; -INVALID – contains space Self- Checked 2 Rewrite the following code so that it has no syntax errors and follows the writing conventions we adopted (i) Program SMALL; VAR X, Y, Z : real; BEGIN Y := 15.0; Z := -Y + 3.5; X :=Y + z; writeln (x, Y, z); END. ANSWER: Program

ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018

musadoto

1. Read Chapter 4 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 4.1 to 4.12 in Matlab. 2. Read Chapter 7 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 7.1 to 7.11 in Matlab. 3. Read Chapter 9 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 9.1 to 9.6 in Matlab. 4. Read Chapter 11 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 11.1 to 11.7 in Matlab. 5. Read Chapter 2 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 2.18 (page 63). 6. Read Chapter 3 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 3.13 (pp 98 - 100). 7. Read Chapter 4 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 4.20 (page 146). 8. Read Chapter 5 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problems 5.15 (page 198), 5.21 (pp 199 - 200) and 5.27 (pp 201 – 202).

Hardeninig of steel (Jominy test)-CoET- udsm

musadoto

The document describes a Jominy end-quench test experiment to measure the hardenability of two steel samples. Steel samples A and C were heated to the austenite temperature and quenched with water at one end. Hardness measurements using the Rockwell C scale were taken at intervals along the samples. Sample A showed little variation in hardness, while hardness decreased with distance from the quenched end for sample C. A graph of hardness versus distance revealed that sample A has higher hardenability, retaining hardness further from the quenched end. The hardenability indices at 50HRC were determined to be 2mm, 5mm, and 6.5mm from the graph.

Ultrasonic testing report-JUNE 2018

musadoto

1.1 The aim of the experiment The aim of the experiment is to test the usefulness of the ultrasonic waves, by passing them through different solids one can find out a lot of physical properties like young’s modulus , defects, Poisson ratio, Velocity of sound in respective material this is due to the response of the received ultrasonic waves. 1.2 Theory of experiment Ultrasonic testing (UT) is a family of non-destructive testing (NDT) techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.

Whether the Pascal program is small or large, it must have a specific structure. This program consists mainly of one statement (WRITELN) which does the actual work here, as it displays whatever comes between the parentheses. The statement is included inside a frame starting with the keyword BEGIN and ending with the keyword END. This is called the program main body (or the program block) and usually contains the main logic of data processing.

Fluid mechanics ...

musadoto

Fluid mechanics (a letter to a friend) part 1 ...

musadoto

Fluids mechanics (a letter to a friend) part 1 ...

musadoto

Fresh concrete -building materials for engineers

musadoto

surveying- lecture notes for engineers

musadoto

Fresh concrete -building materials for engineers

musadoto

DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER

musadoto

The diesel engine (also known as a compression-ignition or CI engine), named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel which is injected into the combustion chamber is caused by the elevated temperature of the air in the cylinder due to mechanical compression (adiabatic compression). Diesel engines work by compressing only the air. This increases the air temperature inside the cylinder to such a high degree that atomised diesel fuel that is injected into the combustion chamber ignites spontaneously. This contrasts with spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to petrol), which use a spark plug to ignite an air-fuel mixture. In diesel engines, glow plugs (combustion chamber pre-warmers) may be used to aid starting in cold weather, or when the engine uses a lower compression-ratio, or both. The original diesel engine operates on the "constant pressure" cycle of gradual combustion and produces no audible knock. A diesel engine built by MAN AG in 1906 Detroit Diesel timing Fairbanks Morse model 32 The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.[1][2

Farm and human power REPORT - AE 215-SOURCES OF FARM POWER

musadoto

Farm is an area of land and its building, used for growing crops a rearing of animals or an area of land that is devoted primarily of agricultural process with the primary objective of producing food and other commercial crops. Or an area of water that is devoted primarily to agricultural process in order to produce and manage such commodities as fibers, grains, livestock or fuel. The process of working the ground, planting seeds and growing of planting known as farming.it can described s raising of animals for milk and meat as farming.

ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER

musadoto

What is an Engine? Before knowing about how the Petrol Engine works, let's first understand what an engine is. This is common for both petrol and diesel engines alike. An engine is a power generating machine which converts potential energy of the fuel into heat energy and then into motion. It produces power and also runs on its own power. The engine generates its power by burning the fuel in a self-regulated and controlled „Combustion‟ process. The combustion process involves many sub-processes which burn the fuel efficiently and results in the smooth running of the engine. These processes include: The suction of air (also known as breathing or aspiration). Mixing of the fuel with air after breaking the liquid fuel into highly atomized / mist form. Igniting the air-fuel mixture with a spark (petrol engine). Burning of highly atomized fuel particles which results in releasing / ejection of heat energy. How does an Engine work? The engine converts Heat Energy into Kinetic Energy in the form of „Reciprocating Motion‟. The expansion of heated gases and their forces act on the engine pistons. The gases push the pistons downwards which results in reciprocating motion of pistons. This motion of the piston enables the crank-shaft to rotate. Thus, it finally converts the reciprocating motion into the 'Rotary motion' and passes on to wheels. A petrol engine (known as a gasoline engine in American English) is an internal combustion engine with spark-ignition, designed to run on petrol (gasoline) and similar volatile fuels. In most petrol engines, the fuel and air are usually mixed after compression (although some modern petrol engines now use cylinder-direct petrol injection). The pre-mixing was formerly done in a carburetor, but now it is done by electronically controlled fuel injection, except in small engines where the cost/complication of electronics does not justify the added engine efficiency. The process differs from a diesel engine in the method of mixing the fuel and air, and in using spark plugs to initiate the combustion process. In a diesel engine, only air is compressed

TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018

musadoto

A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially (and originally) tillage, but nowadays a great variety of tasks. Agricultural implements 0may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised. The word Tractor is derived prior to 1900, the Machine were known as traction motor (pulling-machine).After the year 1900 both the words are joined by taking ‘Tract’ from Traction and ‘Tor” from motor calling it a Tractor. In our Country tractors were started manufacturing in real sense after independence and at present we are self-sufficient in meeting demand of country’s requirement for tractors. Our country is basically an agricultural country where 75% of our population is directly or indirectly connected with agriculture. This cannot be produced with our conventional bullock pulled agricultural implements. Tractor is one of the basic agricultural machines used for speeding up agriculture production.

WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER

musadoto

Wind is the flow of gases on large scale. On the surface of the earth, wind consists of the bulk movement of air. In outer space, solar wind is the movement of gases and charged particles from the sun though space, while planetary wind is the outgassing of light chemical from a planet’s atmosphere into space. Wind by their spatial scale, their speed, the type of force that cause them, the region in which they occur and their effect. The strongest observed winds on planet in solar system occur on Neptune and Saturn. Winds have various aspects, an important one being its velocity, density of the gas involved and energy content of the wind. Wind is almost entirely caused by the effects of the sun which, each hour, delivers 175 million watts of energy to the earth. This energy heats the planet’s surface, most intensively at the equator, which causes air to rise. This rising air creates an area of low pressure at the surface into which cooler air is sucked, and it is this flow of air that we know as “wind”. In reality atmospheric circulation is much more complicated and, after rising at the equator air travels pole wards. As it travels the air cools and eventually descends to the earth’s surface at about 30° latitude (north and south), from where it returns once again to the equator (a closed loop known as a Hadley Cell). Similar cells exist between 30° and 60° latitude (the Ferrell Cells) and between 60° latitude and each of the poles (the Polar Cells). Within these cells, the flow of air is further impacted by the rotation of the earth or the "Coriolis Effect". This effect creates a sideways force which causes air to circulate anticlockwise around areas of low pressure in the northern hemisphere and clockwise in the southern hemisphere In summary, the origin of winds may be traced basically to uneven heating of the earth’s surface due to sun. This may lead to circulation of widespread winds on a global basis, producing planetary winds or may have a limited influence in a smaller area to cause local winds.

Hydro electric power report-AE 215 2018

musadoto

Water power or Hydropower is power derived from the energy of free falling water which may be harnessed for useful purposes. Hydroelectricity is the term referring to electricity generated by hydropower which implies the production of electrical power through the use of the gravitational force of falling or flowing water. It is the most widely used form of renewable energy, accounting for 16 percent of global electricity generation..The cost of hydroelectricity is relatively low, making it a competitive source of renewable electricity. The average cost of electricity from a hydro plant larger than 10 megawatts is 3 to 5 U.S. cents per kilowatthour. Hydro is also a flexible source of electricity since plants can be ramped up and down very quickly to adapt to changing energy demands. However, damming interrupts the flow of rivers and can harm local ecosystems, and building large dams and reservoirs often involves displacing people and wildlife. Once a hydroelectric complex is constructed, the project produces no direct waste, and has a considerably lower output level of the greenhouse gas carbon dioxide (CO2) than fossil fuel powered energy plants.

SOLAR ENERGY - FARM POWER REPORT AE 215

musadoto

Solar energy is a renewable energy, therefore have the following advantages 1. Once solar panels are installed, they produce energy without generating waste or pollution. They operate with little maintenance or intervention. 2. Solar electric generation is economically competitive where grid connection or fuel transport is difficult, costly or impossible. For example: satellites, island communities, remote locations and ocean vessels. 3. Once the initial capital cost of building a solar power plant has been met, operating costs are low when compared to other existing power technologies.

Materials Technology for Engineers pre-test 1 notes

musadoto

Materials are probably more deep-seated in our culture than most of us realize. Transportation, housing, clothing, communication, recreation, and food production virtually every segment of our everyday lives is influenced to one degree or another by materials. Historically, the development and advancement of societies have been intimately tied to the members’ ability to produce and manipulate materials to fill their needs. In fact, early civilizations have been designated by the level of their materials development (i.e., Stone Age, Bronze Age). The earliest humans had access to only a very limited number of materials, those that occur naturally: stone, wood, clay, skins, and so on. With time they discovered techniques for producing materials that had properties superior to those of the natural ones; these new materials included pottery and various metals. Furthermore, it was discovered that the properties of a material could be altered by heat treatments and by the addition of other substances. At this point, materials utilization was totally a selection process, that is, deciding from a given, rather limited set of materials the one that was best suited for an application by virtue of its characteristics. It was not until relatively recent times that scientists came to understand the relationships between the structural elements of materials and their properties. This knowledge acquired in the past 60 years or so, has empowered them to fashion, to a large degree, the characteristics of materials. Thus, tens of thousands of different materials have evolved with rather specialized characteristics that meet the needs of our modern and complex society; these include metals, plastics, glasses, and fibers. The development of many technologies that make our existence so comfortable has been intimately associated with the accessibility of suitable materials. An advancement in the understanding of a material type is often the forerunner to the stepwise progression of a technology. For example, automobiles would not have been possible without the availability of inexpensive steel or some other comparable substitute. In our contemporary era, sophisticated electronic devices rely on components that are made from what are called semiconducting materials.

NUMERICA METHODS 1 final touch summary for test 1

musadoto

NUMERICAL METHODS 1 TUTORIAL QUESTIONS

musadoto

MACHINE DESIGN QUESTION BANK ...

musadoto

The document contains 38 questions related to machine design. The questions cover topics such as standardization of sizes, tolerances, fits, design of joints, shafts, levers, frames and other machine elements. Design calculations are required to determine dimensions that satisfy given loading and stress criteria. Materials, their properties and appropriate factors of safety are provided. References for solutions and examples are given from standard machine design textbooks.

IMPACT TEST REPORT ...

musadoto

TENSILE TEST REPORT

musadoto

RESULTS OF THE EVALUATION QUESTIONNAIRE.pptx

zuzanka

Chapter wise All Notes of First year Basic Civil Engineering.pptx

Denish Jangid

Chapter wise All Notes of First year Basic Civil Engineering Syllabus Chapter-1 Introduction to objective, scope and outcome the subject Chapter 2 Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country. Chapter 3 Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements. Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station. Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps. Chapter 4 Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation Chapter 5 Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures. Chapter 6 Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems. Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect Text Books: 1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers. 2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers. 3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House. 4. BCP, Surveying volume 1

Recently uploaded

RESULTS OF THE EVALUATION QUESTIONNAIRE.pptx

zuzanka

Chapter wise All Notes of First year Basic Civil Engineering.pptx

Denish Jangid

Bonku-Babus-Friend by Sathyajith Ray (9)

nitinpv4ai

Temple of Asclepius in Thrace. Excavation results

Krassimira Luka

مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf

سمير بسيوني

HYPERTENSION - SLIDE SHARE PRESENTATION.

deepaannamalai16

Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"

National Information Standards Organization (NISO)

Stack Memory Organization of 8086 Microprocessor

JomonJoseph58

Nutrition Inc FY 2024, 4 - Hour Training

melliereed

Mule event processing models | MuleSoft Mysore Meetup #47

MysoreMuleSoftMeetup

Mule event processing models | MuleSoft Mysore Meetup #47 Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/ Agenda ● What is event processing in MuleSoft? ● Types of event processing models in Mule 4 ● Distinction between the reactive, parallel, blocking & non-blocking processing For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N Speaker:- Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/ Organizers:- Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/ Giridhar Meka - https://www.linkedin.com/in/giridharmeka Priya Shaw - https://www.linkedin.com/in/priya-shaw

How Barcodes Can Be Leveraged Within Odoo 17

Celine George

SWOT analysis in the project Keeping the Memory @live.pptx

zuzanka

Gender and Mental Health - Counselling and Family Therapy Applications and In...

PsychoTech Services

Electric Fetus - Record Store Scavenger Hunt

RamseyBerglund

Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...

ImMuslim

Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum

MJDuyan

(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬 𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬: - Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology. 𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫: -Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.

REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf

giancarloi8888

Standardized tool for Intelligence test.

deepaannamalai16

Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...

imrankhan141184

Leveraging Generative AI to Drive Nonprofit Innovation

TechSoup

Recently uploaded (20)

RESULTS OF THE EVALUATION QUESTIONNAIRE.pptx

Chapter wise All Notes of First year Basic Civil Engineering.pptx

Bonku-Babus-Friend by Sathyajith Ray (9)

Temple of Asclepius in Thrace. Excavation results

مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf

HYPERTENSION - SLIDE SHARE PRESENTATION.

Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"

Stack Memory Organization of 8086 Microprocessor

Nutrition Inc FY 2024, 4 - Hour Training

Mule event processing models | MuleSoft Mysore Meetup #47

How Barcodes Can Be Leveraged Within Odoo 17

SWOT analysis in the project Keeping the Memory @live.pptx

Gender and Mental Health - Counselling and Family Therapy Applications and In...

Electric Fetus - Record Store Scavenger Hunt

Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...

Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum

REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf

Standardized tool for Intelligence test.

Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...

Leveraging Generative AI to Drive Nonprofit Innovation

2of 4 ue

Recommended

Recommended

More Related Content

More from musadoto

More from musadoto (20)

Recently uploaded

Recently uploaded (20)