Theme. R&D에서 생산까지, 제조 혁신을 위한 CAE 트렌드 Ⅱ
■ 스마트 트랙터를 만드는 IoT와 AR
■ 스마트 건설을 위한 BIM 활용방안 논의
■ 오픈 이노베이션, IoT 시대의 성공사례와 변혁
■ 신제품 - ZW3D 2020, BIM 360, 유니티 리플렉트
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=66026
This document provides technical specifications for 4 solar cell part numbers from CanadianSolar, including the maximum power (Pmax), voltage and current at maximum power (Vpm and Ipm), open circuit voltage (Voc), and short circuit current (Isc). It also mentions that Pspice and LTspice models are available and the cells were modeled by Bee Technologies.
The document outlines a project timeline showing the tender award in 2024, design from 2024-2026, construction from 2017-2023, and completion in 2023. Key phases include tender award, design, construction, and completion.
This document outlines production and instrumentation data for the ARK ENERGY MACHINE over time. It shows the output levels of various assembler operations and instances for zMega data material assembly and instrumentation. Charts provide data on production levels and instrumentation levels for over 30 operations from -15 million to 15 million and -50 million to 50 million respectively.
This document outlines production and instrumentation data for the ARK ENERGY MACHINE over time. It shows the output levels of various assembler operations and instances for zMega data material assembly and instrumentation. Charts provide data on production levels and instrumentation levels for over 30 operations from -15 million to 15 million and -50 million to 50 million respectively.
This document is a technical drawing for a piston component labeled "PISTON 2" that is part of a V-Twin Project. The drawing includes dimensions for the piston's diameter, length, thickness, weight, and rounded edges. It was drawn by Lauritsen, checked on January 31, 2013, and is sheet 1 of 1.
Tuzzi Presentation and Technological CenterElaine Colnago
Tuzzi is a Brazilian steel company with over 45 years of experience. It has facilities totaling over 93,000 square meters and processes 160,000 tons of steel per year with 300 employees. Tuzzi specializes in tractor attachment systems and has testing facilities to ensure product quality, including a 3D measurement arm and materials testing equipment. It aims to provide steel solutions through technological research and product design.
1. This drawing shows views and dimensions of a belt feeder chute for a platinum plant.
2. The drawing was prepared using Tekla Structures software and supplied by Cadex SA, a Tekla reseller based in South Africa.
3. Views include side view, plan on flange, 3D view, and view 04 and 02 with labeled dimensions.
This document provides technical specifications for 4 solar cell part numbers from CanadianSolar, including the maximum power (Pmax), voltage and current at maximum power (Vpm and Ipm), open circuit voltage (Voc), and short circuit current (Isc). It also mentions that Pspice and LTspice models are available and the cells were modeled by Bee Technologies.
The document outlines a project timeline showing the tender award in 2024, design from 2024-2026, construction from 2017-2023, and completion in 2023. Key phases include tender award, design, construction, and completion.
This document outlines production and instrumentation data for the ARK ENERGY MACHINE over time. It shows the output levels of various assembler operations and instances for zMega data material assembly and instrumentation. Charts provide data on production levels and instrumentation levels for over 30 operations from -15 million to 15 million and -50 million to 50 million respectively.
This document outlines production and instrumentation data for the ARK ENERGY MACHINE over time. It shows the output levels of various assembler operations and instances for zMega data material assembly and instrumentation. Charts provide data on production levels and instrumentation levels for over 30 operations from -15 million to 15 million and -50 million to 50 million respectively.
This document is a technical drawing for a piston component labeled "PISTON 2" that is part of a V-Twin Project. The drawing includes dimensions for the piston's diameter, length, thickness, weight, and rounded edges. It was drawn by Lauritsen, checked on January 31, 2013, and is sheet 1 of 1.
Tuzzi Presentation and Technological CenterElaine Colnago
Tuzzi is a Brazilian steel company with over 45 years of experience. It has facilities totaling over 93,000 square meters and processes 160,000 tons of steel per year with 300 employees. Tuzzi specializes in tractor attachment systems and has testing facilities to ensure product quality, including a 3D measurement arm and materials testing equipment. It aims to provide steel solutions through technological research and product design.
1. This drawing shows views and dimensions of a belt feeder chute for a platinum plant.
2. The drawing was prepared using Tekla Structures software and supplied by Cadex SA, a Tekla reseller based in South Africa.
3. Views include side view, plan on flange, 3D view, and view 04 and 02 with labeled dimensions.
Theme. 제조기업이 말하는 스마트 혁신 전략과 추진 과정
■ 폼랩, 제조산업의 3D 프린팅 가능성 확장
■ 자율주행 시대의 새로운 사용자 경험
■ 크레오 11.0의 주요 기능 향상 소개
■ 앤시스 플루언트 GPU 솔버의 소개와 활용
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=74776
■ 디지털 제조 & 뿌리산업 컨퍼런스, 제조산업 혁신 및 성장 전략 소개
■ 빌드스마트포럼 2024, AEC와 Al·메타버스의 시너지 탐구
■ 알테어, 제품 개발을 위한 AI 기술 본격화 추진
■ 유니티 뮤즈의 AI 활용 및 모델 훈련
■ 아레스 캐드 2025의 새로운 기능
■ 1D 시뮬레이션을 위한 카티아 다이몰라
■ PyMAPDL의 기초부터 활용까지
Theme. 플랜트·조선 산업 혁신을 위한 디지털화 전략
■ 솔리드 엣지로 지능형 제품 설계 실현
■ 지스타캐드 시장 확대 및 파트너십 강화 전략
■ 해외 소장 문화재의 ‘디지털 귀향’ 프로젝트
■ 시뮤텐스를 활용한 복합소재 해석 (1)
■ 매스캐드 프라임 9.0 사용하기 Ⅰ
■ LLM 기반 BIM 전문가 챗봇 만들기
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=74362
Theme. 2023 캐드앤그래픽스 독자 설문조사
■ 플랜트 조선 컨퍼런스, AI/DT 통한 혁신 전략 짚어
■ 한국CDE학회, AI 시대의 엔지니어링 전망
■ 디지털 트윈을 통한 벤쿠버 국제공항의 혁신
■ 리뷰-직스캐드, 트림블 커넥트 대시보드
■ 크레오 파라메트릭의 시뮬레이션 기반 설계
■ 앤시스 차지 플러스의 비접촉 정전기 방전 해석
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=74226
Theme. 2023 국내 엔지니어링 소프트웨어 시장 조사
■ LG U+의 가상 오피스 프로젝트
■ 리뷰-VCS, 포즈 드라이버 커넥트
■ 3D 프린팅, 제조업 변화의 바람 일으킬까
■ 크레오 10.0의 설계 탐색 기능
■ 앤시스 스페오스를 활용한 라이트 가이드 해석
■ 딥러닝 수치해석 데이터의 병렬처리
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=74076
Theme. 디지털 전환을 위한 CAE와 시뮬레이션
■ 녹원정보기술, 디지털 트윈으로 실시간 3D 관제 구현
■ 퓨전 360 10주년, 국내 사용자 확대 본격화
■ 리뷰-솔리드웍스 2024, 아키캐드 AI 비주얼라이저
■ 문화유산 분야의 이미지 DB와 활용 사례
■ 제조업 DX의 출발은 3D 데이터 흐름 관리
■ MBD의 이해와 기업 가치 향상을 위한 전략
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=73935
Theme. 제품 개발과 엔지니어링을 혁신하는 디지털 기술
■ CAE 컨퍼런스 2023, AI·디지털 트윈 인사이트 공유
■ 현대엔지니어링, 클라우드로 플랜트 설계 인프라 혁신
■ 피플&컴퍼니-지멘스 DISW 댄 스테이플 이사
■ 적층제조의 복잡성 해소하는 데이터 전송 기술
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73752
■ 앤시스, AI/클라우드로 시뮬레이션 경험 향상
■ 인터뷰-알테어 밍 저우 총괄 연구위원
■ 유니티, 산업 분야서 실시간 3D 기술 확대
■ 생성형 AI 서비스 개발을 위한 라마 2 사용법
■ E-CAD 시장 분석과 전장설계 활용 제언 (1)
■ AWS 클라우드가 제공하는 디지털 트윈 솔루션
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73582
■ 메타버스와 AI가 만드는 산업의 미래를 짚다
■ 헥사곤 MI, 데이터의 연결 통한 제조 혁신 지원
■ 3D에 경제 모델 결합된 메타버스 생태계 만든다
■ 뿌리기술 역량 강화를 위한 3D 프린팅 트렌드
■ 파이썬 기반 오토캐드 설계 자동화 도구 개발
■ 입자와 함께 하는 유동해석
■ 항공우주 및 방위 산업에서의 MBSE
■ 혼합현실이 자동차 개발의 변화를 이끄는 방식
■ 에스엘즈, 건설 분야의 디지털 트윈 기술 개발
■ AMD, GPU·SW 기술과 생태계 강화 추진
■ 메싱 자동화를 통한 CFD 작업시간 단축
■ 아레스 캐드 2024의 평탄화 기능
■ 아키텍처와 MBSE에 의한 시스템 설계
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73299
THEME. 제조 산업의 혁신 돕는 디지털 전환 전략과 기술
■ 시뮬레이션으로 실행 가능한 디지털 트윈 구현
■ 제조산업 디지털 전환의 출발점, 크레오 10
■ BIM 기반 수량산출 관련 정책 및 지침 동향
■ 인공지능 미디어 아트를 위한 생성형 AI 도구
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=73139
■ PLM 컨퍼런스, 디지털 전환 시대 PLM의 역할 모색
■ 리얼타임 시각화로 완성된 해비타트 67
■ 전문 작업 효율 높이는 라데온 프로 W7000 시리즈
■ 다축 적층으로 대형 부품을 저렴하게 출력하다
■ AWS의 에지 컴퓨팅 서비스, IoT 그린그래스
■ NLP 도구를 활용한 논문 텍스트 데이터 마이닝
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73000
■ 3D시스템즈, 3D 프린팅의 제조혁신 가능성 제시
■ 게임 외 다양한 영역의 유니티 활용 사례
■ 제품 개발의 새로운 방법론, MBSE (1)
■ 크레오 파라메트릭 10.0의 부품 모델링 개선
■ 우주 발사체의 이륙 시 음향 해석
■ 리뷰-ZW3D 2024/아레스 트리니티/GEOMETREE
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72843
Theme. 항공우주 산업 현황과 디지털 전환 트렌드
■ 디지털 제조 위한 솔리드 엣지 2023의 신기능
■ 트림블, 디지털 건설을 위한 혁신 전략/기술 소개
■ 하이브리드 업무 위한 델의 기업용 PC 제품군
■ KOEN의 디지털 트윈 발전소 구축 사례
■ 크레오 9.0의 향상된 인체 공학 설계
■ AWS IoT를 활용한 스마트 공장 구현
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72703
Theme. 디지털 전환으로 플랜트/조선 산업의 지속가능한 미래를 열다
■ 로크웰 오토메이션, OT-IT 접목한 스마트 공장 구현
■ 산업지능화 컨퍼런스, AI·DT가 산업을 바꾸다
■ 헥사곤MI, 스마트 제조 위한 생태계 확대
■ 자율주행의 성능 위한 데이터셋의 역할
■ 플루언트 IFSI를 이용한 풍하중 해석
■ 지속가능한 제품 설계로 보다 나은 비즈니스 구축
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72536
■ 플랜트 조선 컨퍼런스 2023, 디지털 전환의 실질적인 노력과 기술 짚다
■ 다쏘시스템, 버추얼 트윈으로 디지털 전환 실현
■ 디지털화와 전기화가 지속가능성의 핵심 전략
■ XR로 자갈치시장의 안전관리 플랫폼 구축
■ 피플&컴퍼니-알씨케이 박수진 대표
■ 라이다-카메라 센서 퓨전을 이용한 3D 객체 인식
■ 그란타 셀렉터를 이용한 최적 재료 선정
Theme. 2022 엔지니어링 소프트웨어 시장조사
■ VR로 AEC 설계 검토의 병목 제거
■ 신제품 - iCAD Plus, JEAMM 700/M1
■ 인텔, 4세대 제온 스케일러블 프로세서 출시
■ JSON에서 레빗 BIM 객체 생성 코딩
■ 국산 차세대 CFD 소프트웨어의 도전
■ 변화하는 시대 그리고 PLM의 변화
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=72191
Theme. 2022 캐드앤그래픽스 독자 설문조사
■ 탄소중립시대 선박 엔진 VPD의 역할
■ CG 및 융합기술 소개한 시그래프 아시아
■ 피플&컴퍼니-알테어, 텐일레븐
■ 온라인 코딩 통합 개발 환경, 코드샌드박스
■ 이미지 정보의 취득, 분석 및 활용 (1)
■ 플루언트를 위한 파이썬 활용
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72024
Theme. 제조/생산을 위한 기술로 나아가는 3D 프린팅
■ 제조산업 DX를 위한 CAE 컨퍼런스
■ 빌딩스마트협회, 건설 산업 혁신 방안 모색
■ pyRevit을 통한 Revision 관리
■ CAM 가공을 위한 기초 지식
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=71880
Theme. 디지털 전환의 가속화를 위한 산업별 메타버스 트렌드
■ 다쏘시스템, 클라우드 제품 개발의 확산 추진
■ 조선 산업을 위한 적층제조 기술 개발
■ 디지털 트윈과 건축건설 이야기
■ BIM에서 리얼타임 3D 경험 강화
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=71721
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Theme. 제조기업이 말하는 스마트 혁신 전략과 추진 과정
■ 폼랩, 제조산업의 3D 프린팅 가능성 확장
■ 자율주행 시대의 새로운 사용자 경험
■ 크레오 11.0의 주요 기능 향상 소개
■ 앤시스 플루언트 GPU 솔버의 소개와 활용
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=74776
■ 디지털 제조 & 뿌리산업 컨퍼런스, 제조산업 혁신 및 성장 전략 소개
■ 빌드스마트포럼 2024, AEC와 Al·메타버스의 시너지 탐구
■ 알테어, 제품 개발을 위한 AI 기술 본격화 추진
■ 유니티 뮤즈의 AI 활용 및 모델 훈련
■ 아레스 캐드 2025의 새로운 기능
■ 1D 시뮬레이션을 위한 카티아 다이몰라
■ PyMAPDL의 기초부터 활용까지
Theme. 플랜트·조선 산업 혁신을 위한 디지털화 전략
■ 솔리드 엣지로 지능형 제품 설계 실현
■ 지스타캐드 시장 확대 및 파트너십 강화 전략
■ 해외 소장 문화재의 ‘디지털 귀향’ 프로젝트
■ 시뮤텐스를 활용한 복합소재 해석 (1)
■ 매스캐드 프라임 9.0 사용하기 Ⅰ
■ LLM 기반 BIM 전문가 챗봇 만들기
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=74362
Theme. 2023 캐드앤그래픽스 독자 설문조사
■ 플랜트 조선 컨퍼런스, AI/DT 통한 혁신 전략 짚어
■ 한국CDE학회, AI 시대의 엔지니어링 전망
■ 디지털 트윈을 통한 벤쿠버 국제공항의 혁신
■ 리뷰-직스캐드, 트림블 커넥트 대시보드
■ 크레오 파라메트릭의 시뮬레이션 기반 설계
■ 앤시스 차지 플러스의 비접촉 정전기 방전 해석
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=74226
Theme. 2023 국내 엔지니어링 소프트웨어 시장 조사
■ LG U+의 가상 오피스 프로젝트
■ 리뷰-VCS, 포즈 드라이버 커넥트
■ 3D 프린팅, 제조업 변화의 바람 일으킬까
■ 크레오 10.0의 설계 탐색 기능
■ 앤시스 스페오스를 활용한 라이트 가이드 해석
■ 딥러닝 수치해석 데이터의 병렬처리
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=74076
Theme. 디지털 전환을 위한 CAE와 시뮬레이션
■ 녹원정보기술, 디지털 트윈으로 실시간 3D 관제 구현
■ 퓨전 360 10주년, 국내 사용자 확대 본격화
■ 리뷰-솔리드웍스 2024, 아키캐드 AI 비주얼라이저
■ 문화유산 분야의 이미지 DB와 활용 사례
■ 제조업 DX의 출발은 3D 데이터 흐름 관리
■ MBD의 이해와 기업 가치 향상을 위한 전략
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=73935
Theme. 제품 개발과 엔지니어링을 혁신하는 디지털 기술
■ CAE 컨퍼런스 2023, AI·디지털 트윈 인사이트 공유
■ 현대엔지니어링, 클라우드로 플랜트 설계 인프라 혁신
■ 피플&컴퍼니-지멘스 DISW 댄 스테이플 이사
■ 적층제조의 복잡성 해소하는 데이터 전송 기술
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73752
■ 앤시스, AI/클라우드로 시뮬레이션 경험 향상
■ 인터뷰-알테어 밍 저우 총괄 연구위원
■ 유니티, 산업 분야서 실시간 3D 기술 확대
■ 생성형 AI 서비스 개발을 위한 라마 2 사용법
■ E-CAD 시장 분석과 전장설계 활용 제언 (1)
■ AWS 클라우드가 제공하는 디지털 트윈 솔루션
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73582
■ 메타버스와 AI가 만드는 산업의 미래를 짚다
■ 헥사곤 MI, 데이터의 연결 통한 제조 혁신 지원
■ 3D에 경제 모델 결합된 메타버스 생태계 만든다
■ 뿌리기술 역량 강화를 위한 3D 프린팅 트렌드
■ 파이썬 기반 오토캐드 설계 자동화 도구 개발
■ 입자와 함께 하는 유동해석
■ 항공우주 및 방위 산업에서의 MBSE
■ 혼합현실이 자동차 개발의 변화를 이끄는 방식
■ 에스엘즈, 건설 분야의 디지털 트윈 기술 개발
■ AMD, GPU·SW 기술과 생태계 강화 추진
■ 메싱 자동화를 통한 CFD 작업시간 단축
■ 아레스 캐드 2024의 평탄화 기능
■ 아키텍처와 MBSE에 의한 시스템 설계
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73299
THEME. 제조 산업의 혁신 돕는 디지털 전환 전략과 기술
■ 시뮬레이션으로 실행 가능한 디지털 트윈 구현
■ 제조산업 디지털 전환의 출발점, 크레오 10
■ BIM 기반 수량산출 관련 정책 및 지침 동향
■ 인공지능 미디어 아트를 위한 생성형 AI 도구
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=73139
■ PLM 컨퍼런스, 디지털 전환 시대 PLM의 역할 모색
■ 리얼타임 시각화로 완성된 해비타트 67
■ 전문 작업 효율 높이는 라데온 프로 W7000 시리즈
■ 다축 적층으로 대형 부품을 저렴하게 출력하다
■ AWS의 에지 컴퓨팅 서비스, IoT 그린그래스
■ NLP 도구를 활용한 논문 텍스트 데이터 마이닝
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=73000
■ 3D시스템즈, 3D 프린팅의 제조혁신 가능성 제시
■ 게임 외 다양한 영역의 유니티 활용 사례
■ 제품 개발의 새로운 방법론, MBSE (1)
■ 크레오 파라메트릭 10.0의 부품 모델링 개선
■ 우주 발사체의 이륙 시 음향 해석
■ 리뷰-ZW3D 2024/아레스 트리니티/GEOMETREE
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72843
Theme. 항공우주 산업 현황과 디지털 전환 트렌드
■ 디지털 제조 위한 솔리드 엣지 2023의 신기능
■ 트림블, 디지털 건설을 위한 혁신 전략/기술 소개
■ 하이브리드 업무 위한 델의 기업용 PC 제품군
■ KOEN의 디지털 트윈 발전소 구축 사례
■ 크레오 9.0의 향상된 인체 공학 설계
■ AWS IoT를 활용한 스마트 공장 구현
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72703
Theme. 디지털 전환으로 플랜트/조선 산업의 지속가능한 미래를 열다
■ 로크웰 오토메이션, OT-IT 접목한 스마트 공장 구현
■ 산업지능화 컨퍼런스, AI·DT가 산업을 바꾸다
■ 헥사곤MI, 스마트 제조 위한 생태계 확대
■ 자율주행의 성능 위한 데이터셋의 역할
■ 플루언트 IFSI를 이용한 풍하중 해석
■ 지속가능한 제품 설계로 보다 나은 비즈니스 구축
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72536
■ 플랜트 조선 컨퍼런스 2023, 디지털 전환의 실질적인 노력과 기술 짚다
■ 다쏘시스템, 버추얼 트윈으로 디지털 전환 실현
■ 디지털화와 전기화가 지속가능성의 핵심 전략
■ XR로 자갈치시장의 안전관리 플랫폼 구축
■ 피플&컴퍼니-알씨케이 박수진 대표
■ 라이다-카메라 센서 퓨전을 이용한 3D 객체 인식
■ 그란타 셀렉터를 이용한 최적 재료 선정
Theme. 2022 엔지니어링 소프트웨어 시장조사
■ VR로 AEC 설계 검토의 병목 제거
■ 신제품 - iCAD Plus, JEAMM 700/M1
■ 인텔, 4세대 제온 스케일러블 프로세서 출시
■ JSON에서 레빗 BIM 객체 생성 코딩
■ 국산 차세대 CFD 소프트웨어의 도전
■ 변화하는 시대 그리고 PLM의 변화
https://www.cadgraphics.co.kr/newsview.php?pages=magazine&sub=magazine01&catecode=26&num=72191
Theme. 2022 캐드앤그래픽스 독자 설문조사
■ 탄소중립시대 선박 엔진 VPD의 역할
■ CG 및 융합기술 소개한 시그래프 아시아
■ 피플&컴퍼니-알테어, 텐일레븐
■ 온라인 코딩 통합 개발 환경, 코드샌드박스
■ 이미지 정보의 취득, 분석 및 활용 (1)
■ 플루언트를 위한 파이썬 활용
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=72024
Theme. 제조/생산을 위한 기술로 나아가는 3D 프린팅
■ 제조산업 DX를 위한 CAE 컨퍼런스
■ 빌딩스마트협회, 건설 산업 혁신 방안 모색
■ pyRevit을 통한 Revision 관리
■ CAM 가공을 위한 기초 지식
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=71880
Theme. 디지털 전환의 가속화를 위한 산업별 메타버스 트렌드
■ 다쏘시스템, 클라우드 제품 개발의 확산 추진
■ 조선 산업을 위한 적층제조 기술 개발
■ 디지털 트윈과 건축건설 이야기
■ BIM에서 리얼타임 3D 경험 강화
https://www.cadgraphics.co.kr/index.php?pages=magazine&sub=magazine01&m=view&catecode=26&num=71721
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...shadow0702a
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.